Search Results

Search found 12766 results on 511 pages for 'diagnostic tools'.

Page 402/511 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >

• WPA2 authentication fails on Ubuntu 12.04 using Rosewill RNX-N1

  - by user94156

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. RNX-X1 works on other systems (including TV); also have 2 of 'em and tried each. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Oracle Tutor: Create Accessible Content for the Disabled Community

  - by emily.chorba(at)oracle.com

  For many reasons--legal, business, and ethical--Oracle recognizes the need for its applications, and our customers' and partners' products built with our tools, to be usable by the disabled community. The following features of Tutor Author and Publisher software facilitate the creation of accessible HTML content for the disabled community.TablesThe following formatting guidelines will ensure that Tutor documents containing tables will be accessible once they are converted to HTML.• Determine whether a table is a "data table" or whether you are using a table simply for formatting. If it's a data table, you must use a heading for each column, and you should format this heading row as "table heading" style and select Table > Heading Rows Repeat.• For non data tables, it is not necessary to include a heading row.GraphicsTo create accessible graphics, add a caption to the graphic. In Microsoft Office 2000 and greater, right-click on the graphic and select Format Picture > Web (tab) > Alternative Text or select the graphic then Format > Picture > Web (tab) Alternative Text. Enter the appropriate information in the dialog box.When a document containing a graphic with alternative text is converted to HTML by Tutor, the HTML document will contain the appropriate accessibility information.Javascript elementsThe tabbed format and other javascript elements in the HTML version of the Tutor documents may not be accessible to all users. A link to an accessible/printable version of the document is available in the upper right corner of all Tutor documents.Repetitive dataIf repetitive data such as the distribution section and the ownership section are causing accessibility issues with your Tutor documents, you can insert a bookmark in the appropriate location of the document, and, when the document is converted to HTML, the bookmark will be converted to an A NAME reference (also known as an internal link). With this reference, you can create a link in Header.txt that can be prepended to each Tutor document that allows the user to bypass repetitive sections. Tutor and Oracle ApplicationsRegarding accessibility, please check Oracle's website on accessibility http://www.oracle.com/accessibility/ to find out what version of E-Business Suite is certified to work with screen readers. Oracle Tutor 11.5.6A and greater works with screen readers such as JAWS.There is no certification between Oracle Tutor and Oracle Applications because there are no related dependencies. It doesn't matter which version of the Oracle Applications you are running. Therefore, it is possible to use Oracle Tutor with earlier versions of Oracle Applications.Oracle Business Process Converter and Oracle ApplicationsOracle Business Process Converter (OBPC) converts Visio, XPDL, and Tutor models to Oracle Business Process Architect and Oracle Business Process Management. The OBPC is one of a collection of plugins to Oracle JDeveloper. Please see the VPAT as the same considerations apply.Learn MoreFor more information about Tutor, visit Oracle.Com or the Tutor Blog. Post your questions at the Tutor Forum. Emily ChorbaPrinciple Product Manager Oracle Tutor & BPM

  Read the article

• Making the WPeFfort

  - by Laila

  Microsoft Visual Studio 2010 will be launched on April 12th. The basic layout looks pretty much as it did, so it is not immediately obvious on first inspection that it was completely rewritten in the Windows Presentation Foundation (WPF). The current VS 2008 codebase had reached the end of its life; It was getting slow to initialize and sluggish to run, and was never going to allow for multi-monitor support or easier extensibility. It can't have been an easy decision to rewrite Visual Studio, but the gamble seems to have paid off. Although certain bugs in the betas caused some anxiety about performance, these seem to have been fixed, and the new Visual Studio is definitely faster. In rewriting the codebase, it has been possible to make obvious improvements, such as being able to run different windows on different monitors, and you only being presented with the Toolbox controls and References that are appropriate to your target .NET version. There is also an IntelliTrace debugger, and Intellisense has been improved by virtue of separating a 'Suggestion Mode' and 'Completion Mode' (with its 'Generate From.' 'Highlight References.', and 'Navigate to...' features). At the same time, there has been quite a clearout; Certain features that had been tucked away in the previous versions, such as Brief or Emacs emulation support, have been dropped. (Yes, they were being used!) There are a lot of features that didn't require the rewrite, but are welcome. It is now easier to develop WPF applications (e.g. drag-and-drop Databinding), and there is support for Azure. There are more, and better templates and the design tools are greatly improved (e.g. Expression Web, Expression Blend, WPF Sketchflow, Silverlight designer, Document Map Margin and Inline Call Hierarchy). Sharepoint is better supported, and Office apps will benefit from C#'s support of optional and named arguments, and allowing several Office Solutions within a Deployment package. Most importantly, it is a vote of confidence in the WPF. VS 2010 is the essential missing component that has been impeding the faster adoption of WPF. The fact that it is actually now written in WPF should now reassure the doubters, and convince more developers to make the move from WinForms to WPF. In using WPF, the developers of Visual Studio have had the clout to fix some issues which have been bothering WPF developers for some time (such as blurred text). Do you see a brighter future as a result of transferring from WinForms to WPF? I'd love to know what you think. Cheers, Laila

  Read the article

• BigData and Customer Experience: Happy Together

  - by Isabel F. Peñuelas

  The two big buzzes of the year may lay closer than it appears. Both concepts intersect at various points: BigData and Return of Investment of Marketing Campaigns On a recent post Big Data Is The Future Of Marketing Jeff Dachis explains very clearly how “Big data analytics finally allows marketers to identify, measure, and manage what is positively impacting their Brand”. Regression analysis applied to big data volumes coming from social media will substitute the failed attempts to justify marketing investments on social media in terms of followers and likes, he continues, “the measurement models applied by marketers on TV Campaigns don´t work on social”, we need to study the data with fresh eyes and maybe then we will start understanding and measuring brand engagemet. Social CRM and BigData The real value of Social CRM start by analyzing mass of big data from social media in order of applying social intelligence techniques that allow us to classify new customer niches and communities and define appropriated strategies to contact potential customers. Gartner Says that the Market for Social CRM is on pace to surpass $1 Billion in Revenue by Year-End 2012 but in words of Zach Hofer-Shall, Analyst at Forrester Research “Social customer relationship management is hard” (The Social CRM Arms Race Heats ). To succeed brands need three things: Investing in new social tools, investing in consultancy and investing in infrastructure for massive data storage and analysis. Neither CeX or BigData are easy and cheap wins. But what are the customer benefits of such investments? Big Data and Brand Engagement Time is the most valuable asset of todays consumers: tired of information overload, exhausted by the terabytes of offering, anxious because of not having the same fast multichannel experience with their services’ marketers or preferred goods providers than the one they found on their social media. Yes, I know you have read this before- me too. But is real. The motto of the Customer Experience philosophy of providing a consistent experience through multiple touchpoints that makes the relationship customer/brand easier and valuable finds it basis on understanding customer/s preferences and context for which BigData analysis is another imperative. In summary, I believe that using BigData Analysis in combination with appropriated CeX strategies and technologies is a promising direction for achieving: efficiency and marketing cost-savings; growing the customer base; and increasing customer conversion and retention. In a world: The Direction of Future Marketing.

  Read the article

• Open the SQL Server Error Log with PowerShell

  - by BuckWoody

  Using the Server Management Objects (SMO) library, you don’t even need to have the SQL Server 2008 PowerShell Provider to read the SQL Server Error Logs – in fact, you can use regular old everyday PowerShell. Keep in mind you will need the SMO libraries – which can be installed separately or by installing the Client Tools from the SQL Server install media. You could search for errors, store a result as a variable, or act on the returned values in some other way. Replace the Machine Name with your server and Instance Name with your instance, but leave the quotes, to make this work on your system: [reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.Smo") $machineName = "UNIVAC" $instanceName = "Production" $sqlServer = new-object ("Microsoft.SqlServer.Management.Smo.Server") "$machineName\$instanceName" $sqlServer.ReadErrorLog() Want to search for something specific, like the word “Error”? Replace the last line with this: $sqlServer.ReadErrorLog() | where {$_.Text -like "Error*"} Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Stop Office 2010 Upload Center Icon from Displaying in the Taskbar

  - by Mysticgeek

  One of the new features in Office 2010 is the ability to upload your files to Office Web Apps. When you do, an Upload Center icon appears in the Taskbar and helps manage documents. Here’s how to stop it from showing up. If you’re running Office 2010 and upload files to the web, you’ll notice the Microsoft Office Upload Center Icon appears on the Taskbar in the Notification Area. It will stay there even after you’re done uploading the document and closed out of all Office apps. You can use this to monitor and control the documents you’re uploading to the web. Getting rid of it is fairly simple. Right-click the icon and select Settings. When the Microsoft Office Upload Center Settings window appears, under Display Options, uncheck Display icon in notification area and click OK. That is all there is to it…now it will no longer appear in the Taskbar.   After you upload your first document, it will also want to startup with Windows. You can go into msconfig and disable it from automatically starting up. If you need to access it again, it’s part of  Office 2010 Tools which you can access from the Start Menu. Or you can type upload center into the Search box in the Start Menu and hit Enter. If you upload a lot of work to Microsoft Web Apps you might find this tool useful, but if you only occasionally upload docs, you might be annoyed by it always being in the Taskbar. Similar Articles Productive Geek Tips Manage Sending 2010 Documents to the Web with Office Upload CenterHow To Manage Action Center in Windows 7What is Mobsync.exe and Why Is It Running?Taskbar Eliminator Does What the Name Implies: Hides Your Windows TaskbarDisable Office 2010 Beta Send-a-Smile from Startup TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar

  Read the article

• Enhance Your Browsing with Hyperwords in Firefox

  - by Asian Angel

  While browsing it is easy to find information that you would like to know more about, convert, or translate. The Hyperwords extension provides access to these types of resources and more in Firefox. Using Hyperwords Once the extension has finished installing you will be presented with a demo video that will let you learn more about how Hyperwords works. For our first example we chose to look for more information concerning “WASP-12b” using Wikipedia. Notice the small bluish circle on the lower right of the highlighted term…it is the default access for the Hyperwords menu (access by hovering mouse over it). If you hover over the the Wikipedia (or other) link you can access the information in a scrollable popup window. Or if you prefer click on the link to view the information in a new tab. Choose the style that best suits your needs. Hyperwords is extremely useful for quick unit conversions. Suppose you want to share a news story that you have found while browsing. Highlight the title, access Hyperwords, and choose your preferred sharing source. You may need to authorize access for Hyperwords to post to your account. Once you have authorized access you can start sharing those links very easily. This is just a small sampling of Hyperwords many useful features. Preferences Hyperwords has a nice set of preferences available to help you customize it. Alter the menu popup style, add or remove menu entries, and modify other functions for Hyperwords. Conclusion Hyperwords makes a nice addition to Firefox for anyone needing quick access to search, reference, translation, and other services while browsing. Links Download the Hyperwords extension (Mozilla Add-ons) Download the Hyperwords extension (Extension Homepage) Similar Articles Productive Geek Tips Switch to Private Browsing Mode Easily with Toggle Private BrowsingPreview Tabs in Firefox with Tab Preview 0.3You Really Want to Completely Disable Tabs in Firefox?Quick Hits: 11 Firefox Tab How-TosWhen to Use Protect Tab vs Lock Tab in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium Use ILovePDF To Split and Merge PDF Files

  Read the article

• Excel tables creation upon MySQL data import (new feature in MySQL for Excel 1.2.x)

  - by Javier Treviño

  In this blog post we are going to talk about one of the features included since MySQL for Excel 1.2.0, you can install the latest GA or maintenance version using the MySQL Installer or optionally you can download directly any GA or non-GA version from the MySQL Developer Zone. Remember how easy is to dump data from a MySQL table, view or stored procedure to an Excel worksheet? (If you don't you can check out this other post: How To - Guide to Importing Data from a MySQL Database to Excel using MySQL for Excel). In version 1.2.0 we introduced some advanced options for the Import MySQL Data operation regarding Excel tables. The Advanced Options dialog shown above is accessible from any Import Data dialog. When the Create an Excel table for the imported MySQL table data option is checked (which is by default), MySQL for Excel will create an Excel table (also known in Excel jargon as a ListObject) from the Excel range containing the imported MySQL data. This "little feature" enables the right-away usage of the Excel table in data analysis, like including it for summarization on a PivotTable, including a summarization row at the end of the table's data, sorting or filtering the table's data by clicking the drop-down button next to each column's header, among other actions. The Excel tables that are created automatically from imported MySQL data will have a name like [UserPrefix].<SchemaName>.<DbObjectName> for tables and views, and <Prefix>.<SchemaName>.<ProcedureName>.<ResultSetName> for stored procedures.  Notice the first piece of the name is an optional [UserPrefix], the prefix is only used if the Prefix Excel tables with the following text option is checked, notice that the suggested prefix is "MySQL" but it can be changed to whatever text is suitable for you. Excel tables must have a table style so they are easily identified. There are a lot of predefined Excel table styles, by default the MySqlDefault style is applied, which is the style you have seen applied to imported data for Edit Sessions, and which adds simple and elegant formatting to the table. If you wish to change it to any of the predefined Excel table style you can do it through the drop-down list on the Use style [[styles drop-down]] for the new Excel table option. Excel tables are the basic construction blocks for building data analysis or self-service Business Intelligence using other more advanced Excel tools like Power Pivot, Power View or Power Map. This feature empowers imported MySQL data to use it in more advanced ways.  We hope you give this and the other new features in the 1.2.x version family a try! Remember that your feedback is very important for us, so drop us a message and follow us: MySQL on Windows (this) Blog: https://blogs.oracle.com/MySqlOnWindows/ MySQL for Excel forum: http://forums.mysql.com/list.php?172 Facebook: http://www.facebook.com/mysql YouTube channel: https://www.youtube.com/user/MySQLChannel Cheers!

  Read the article

• What's new in the RightNow November 2012 release?

  - by Richard Lefebvre

  What new in the RightNow November 2012? In order to find out, please watch this tutorial with imbedded demonstration or read the November 2012 Release notes.   News Facts The November 2012 release of     Oracle’s RightNow CX Cloud Service marks the completion of development efforts for 2012 and continues Oracle’s commitment to enhancing the Oracle RightNow offering following the acquisition. New release delivers key capabilities designed to help organizations improve customer experiences in order to increase customer acquisition and retention, while reducing total cost of ownership. Part of the Oracle Cloud, Oracle RightNow CX Cloud Service now integrates Oracle RightNow Chat Cloud Service with Oracle Engagement Engine Cloud Service, helping organizations intelligently and proactively engage with customers through the right channel at the right time. Chat solutions have emerged as an important component of a cross-channel customer experience strategy. According to Forrester Research, Inc., chat adoption has risen dramatically between 2009 and 2011 from 19% to 37%, and it has the highest satisfaction level of all customer service channels at 62% satisfaction. (*) To help companies deliver enhanced customer experiences, Oracle has made significant investments in Oracle RightNow Chat Cloud Service throughout 2012. With the addition of rules-based engagement to existing capabilities such as co-browse, mobile chat, and cross-channel knowledge integration with the contact center, all delivered via the cloud, Oracle RightNow Chat Cloud Service is differentiated as the industry-leading chat solution. The Oracle Cloud offers a broad portfolio of software as-a-service applications, including Oracle Customer Service and Support Cloud Service, which is based on the Oracle RightNow CX Cloud Service. New Capabilities Key Oracle RightNow Chat Cloud Service and other cross-channel capabilities include: Chat Business Rules, with over 70 built-in rule conditions, leverage the Oracle Engagement Engine to help enable organizations capture rich visitor data and invoke complex actions and triggers. Chat Business Rules allow granular control over when to engage a customer via the chat channel based on customer behavior, customer profile information and operational information. Click-to-Call provides the option for a customer to engage with a live agent over the phone during the Web browsing experience. Chat Availability Controls provide organizations with the ability to throttle volume through the chat channel based on real-time agent availability and wait time thresholds. This ability to manage the channel more efficiently allows organizations to provide a better experience to customers using the chat channel. Strategic and Operational Chat Channel Analytics provide better insight into channel and agent productivity and utilization and effectiveness with both out-of-the-box reports and ad hoc reports. New chat channel analytics provide comprehensive metrics with full data transparency. Background Service Updates improve high availability metrics for Oracle RightNow Chat Cloud Service during service update periods, setting the industry leading standard for sales and service delivery to customers via the chat channel. Additional Capabilities include: Improved Web developer tools for more efficient self-service user interface design Improved administration for enhanced user sessions management Increased cross-channel community collaboration Enhanced extensibility widgets and syndication management Streamlined content management and analytics capabilities Read the full announcement here

  Read the article

• Towards Database Continuous Delivery – What Next after Continuous Integration? A Checklist

  - by Ben Rees

  .dbd-banner p{ font-size:0.75em; padding:0 0 10px; margin:0 } .dbd-banner p span{ color:#675C6D; } .dbd-banner p:last-child{ padding:0; } @media ALL and (max-width:640px){ .dbd-banner{ background:#f0f0f0; padding:5px; color:#333; margin-top: 5px; } } -- Database delivery patterns & practices STAGE 4 AUTOMATED DEPLOYMENT If you’ve been fortunate enough to get to the stage where you’ve implemented some sort of continuous integration process for your database updates, then hopefully you’re seeing the benefits of that investment – constant feedback on changes your devs are making, advanced warning of data loss (prior to the production release on Saturday night!), a nice suite of automated tests to check business logic, so you know it’s going to work when it goes live, and so on. But what next? What can you do to improve your delivery process further, moving towards a full continuous delivery process for your database? In this article I describe some of the issues you might need to tackle on the next stage of this journey, and how to plan to overcome those obstacles before they appear. Our Database Delivery Learning Program consists of four stages, really three – source controlling a database, running continuous integration processes, then how to set up automated deployment (the middle stage is split in two – basic and advanced continuous integration, making four stages in total). If you’ve managed to work through the first three of these stages – source control, basic, then advanced CI, then you should have a solid change management process set up where, every time one of your team checks in a change to your database (whether schema or static reference data), this change gets fully tested automatically by your CI server. But this is only part of the story. Great, we know that our updates work, that the upgrade process works, that the upgrade isn’t going to wipe our 4Tb of production data with a single DROP TABLE. But – how do you get this (fully tested) release live? Continuous delivery means being always ready to release your software at any point in time. There’s a significant gap between your latest version being tested, and it being easily releasable. Just a quick note on terminology – there’s a nice piece here from Atlassian on the difference between continuous integration, continuous delivery and continuous deployment. This piece also gives a nice description of the benefits of continuous delivery. These benefits have been summed up by Jez Humble at Thoughtworks as: “Continuous delivery is a set of principles and practices to reduce the cost, time, and risk of delivering incremental changes to users” There’s another really useful piece here on Simple-Talk about the need for continuous delivery and how it applies to the database written by Phil Factor – specifically the extra needs and complexities of implementing a full CD solution for the database (compared to just implementing CD for, say, a web app). So, hopefully you’re convinced of moving on the the next stage! The next step after CI is to get some sort of automated deployment (or “release management”) process set up. But what should I do next? What do I need to plan and think about for getting my automated database deployment process set up? Can’t I just install one of the many release management tools available and hey presto, I’m ready! If only it were that simple. Below I list some of the areas that it’s worth spending a little time on, where a little planning and prep could go a long way. It’s also worth pointing out, that this should really be an evolving process. Depending on your starting point of course, it can be a long journey from your current setup to a full continuous delivery pipeline. If you’ve got a CI mechanism in place, you’re certainly a long way down that path. Nevertheless, we’d recommend evolving your process incrementally. Pages 157 and 129-141 of the book on Continuous Delivery (by Jez Humble and Dave Farley) have some great guidance on building up a pipeline incrementally: http://www.amazon.com/Continuous-Delivery-Deployment-Automation-Addison-Wesley/dp/0321601912 For now, in this post, we’ll look at the following areas for your checklist: You and Your Team Environments The Deployment Process Rollback and Recovery Development Practices You and Your Team It’s a cliché in the DevOps community that “It’s not all about processes and tools, really it’s all about a culture”. As stated in this DevOps report from Puppet Labs: “DevOps processes and tooling contribute to high performance, but these practices alone aren’t enough to achieve organizational success. The most common barriers to DevOps adoption are cultural: lack of manager or team buy-in, or the value of DevOps isn’t understood outside of a specific group”. Like most clichés, there’s truth in there – if you want to set up a database continuous delivery process, you need to get your boss, your department, your company (if relevant) onside. Why? Because it’s an investment with the benefits coming way down the line. But the benefits are huge – for HP, in the book A Practical Approach to Large-Scale Agile Development: How HP Transformed LaserJet FutureSmart Firmware, these are summarized as: -2008 to present: overall development costs reduced by 40% -Number of programs under development increased by 140% -Development costs per program down 78% -Firmware resources now driving innovation increased by a factor of 8 (from 5% working on new features to 40% But what does this mean? It means that, when moving to the next stage, to make that extra investment in automating your deployment process, it helps a lot if everyone is convinced that this is a good thing. That they understand the benefits of automated deployment and are willing to make the effort to transform to a new way of working. Incidentally, if you’re ever struggling to convince someone of the value I’d strongly recommend just buying them a copy of this book – a great read, and a very practical guide to how it can really work at a large org. I’ve spoken to many customers who have implemented database CI who describe their deployment process as “The point where automation breaks down. Up to that point, the CI process runs, untouched by human hand, but as soon as that’s finished we revert to manual.” This deployment process can involve, for example, a DBA manually comparing an environment (say, QA) to production, creating the upgrade scripts, reading through them, checking them against an Excel document emailed to him/her the night before, turning to page 29 in his/her notebook to double-check how replication is switched off and on for deployments, and so on and so on. Painful, error-prone and lengthy. But the point is, if this is something like your deployment process, telling your DBA “We’re changing everything you do and your toolset next week, to automate most of your role – that’s okay isn’t it?” isn’t likely to go down well. There’s some work here to bring him/her onside – to explain what you’re doing, why there will still be control of the deployment process and so on. Or of course, if you’re the DBA looking after this process, you have to do a similar job in reverse. You may have researched and worked out how you’d like to change your methodology to start automating your painful release process, but do the dev team know this? What if they have to start producing different artifacts for you? Will they be happy with this? Worth talking to them, to find out. As well as talking to your DBA/dev team, the other group to get involved before implementation is your manager. And possibly your manager’s manager too. As mentioned, unless there’s buy-in “from the top”, you’re going to hit problems when the implementation starts to get rocky (and what tool/process implementations don’t get rocky?!). You need to have support from someone senior in your organisation – someone you can turn to when you need help with a delayed implementation, lack of resources or lack of progress. Actions: Get your DBA involved (or whoever looks after live deployments) and discuss what you’re planning to do or, if you’re the DBA yourself, get the dev team up-to-speed with your plans, Get your boss involved too and make sure he/she is bought in to the investment. Environments Where are you going to deploy to? And really this question is – what environments do you want set up for your deployment pipeline? Assume everyone has “Production”, but do you have a QA environment? Dedicated development environments for each dev? Proper pre-production? I’ve seen every setup under the sun, and there is often a big difference between “What we want, to do continuous delivery properly” and “What we’re currently stuck with”. Some of these differences are: What we want What we’ve got Each developer with their own dedicated database environment A single shared “development” environment, used by everyone at once An Integration box used to test the integration of all check-ins via the CI process, along with a full suite of unit-tests running on that machine In fact if you have a CI process running, you’re likely to have some sort of integration server running (even if you don’t call it that!). Whether you have a full suite of unit tests running is a different question… Separate QA environment used explicitly for manual testing prior to release “We just test on the dev environments, or maybe pre-production” A proper pre-production (or “staging”) box that matches production as closely as possible Hopefully a pre-production box of some sort. But does it match production closely!? A production environment reproducible from source control A production box which has drifted significantly from anything in source control The big question is – how much time and effort are you going to invest in fixing these issues? In reality this just involves figuring out which new databases you’re going to create and where they’ll be hosted – VMs? Cloud-based? What about size/data issues – what data are you going to include on dev environments? Does it need to be masked to protect access to production data? And often the amount of work here really depends on whether you’re working on a new, greenfield project, or trying to update an existing, brownfield application. There’s a world if difference between starting from scratch with 4 or 5 clean environments (reproducible from source control of course!), and trying to re-purpose and tweak a set of existing databases, with all of their surrounding processes and quirks. But for a proper release management process, ideally you have: Dedicated development databases, An Integration server used for testing continuous integration and running unit tests. [NB: This is the point at which deployments are automatic, without human intervention. Each deployment after this point is a one-click (but human) action], QA – QA engineers use a one-click deployment process to automatically* deploy chosen releases to QA for testing, Pre-production. The environment you use to test the production release process, Production. * A note on the use of the word “automatic” – when carrying out automated deployments this does not mean that the deployment is happening without human intervention (i.e. that something is just deploying over and over again). It means that the process of carrying out the deployment is automatic in that it’s not a person manually running through a checklist or set of actions. The deployment still requires a single-click from a user. Actions: Get your environments set up and ready, Set access permissions appropriately, Make sure everyone understands what the environments will be used for (it’s not a “free-for-all” with all environments to be accessed, played with and changed by development). The Deployment Process As described earlier, most existing database deployment processes are pretty manual. The following is a description of a process we hear very often when we ask customers “How do your database changes get live? How does your manual process work?” Check pre-production matches production (use a schema compare tool, like SQL Compare). Sometimes done by taking a backup from production and restoring in to pre-prod, Again, use a schema compare tool to find the differences between the latest version of the database ready to go live (i.e. what the team have been developing). This generates a script, User (generally, the DBA), reviews the script. This often involves manually checking updates against a spreadsheet or similar, Run the script on pre-production, and check there are no errors (i.e. it upgrades pre-production to what you hoped), If all working, run the script on production.* * this assumes there’s no problem with production drifting away from pre-production in the interim time period (i.e. someone has hacked something in to the production box without going through the proper change management process). This difference could undermine the validity of your pre-production deployment test. Red Gate is currently working on a free tool to detect this problem – sign up here at www.sqllighthouse.com, if you’re interested in testing early versions. There are several variations on this process – some better, some much worse! How do you automate this? In particular, step 3 – surely you can’t automate a DBA checking through a script, that everything is in order!? The key point here is to plan what you want in your new deployment process. There are so many options. At one extreme, pure continuous deployment – whenever a dev checks something in to source control, the CI process runs (including extensive and thorough testing!), before the deployment process keys in and automatically deploys that change to the live box. Not for the faint hearted – and really not something we recommend. At the other extreme, you might be more comfortable with a semi-automated process – the pre-production/production matching process is automated (with an error thrown if these environments don’t match), followed by a manual intervention, allowing for script approval by the DBA. One he/she clicks “Okay, I’m happy for that to go live”, the latter stages automatically take the script through to live. And anything in between of course – and other variations. But we’d strongly recommended sitting down with a whiteboard and your team, and spending a couple of hours mapping out “What do we do now?”, “What do we actually want?”, “What will satisfy our needs for continuous delivery, but still maintaining some sort of continuous control over the process?” NB: Most of what we’re discussing here is about production deployments. It’s important to note that you will also need to map out a deployment process for earlier environments (for example QA). However, these are likely to be less onerous, and many customers opt for a much more automated process for these boxes. Actions: Sit down with your team and a whiteboard, and draw out the answers to the questions above for your production deployments – “What do we do now?”, “What do we actually want?”, “What will satisfy our needs for continuous delivery, but still maintaining some sort of continuous control over the process?” Repeat for earlier environments (QA and so on). Rollback and Recovery If only every deployment went according to plan! Unfortunately they don’t – and when things go wrong, you need a rollback or recovery plan for what you’re going to do in that situation. Once you move in to a more automated database deployment process, you’re far more likely to be deploying more frequently than before. No longer once every 6 months, maybe now once per week, or even daily. Hence the need for a quick rollback or recovery process becomes paramount, and should be planned for. NB: These are mainly scenarios for handling rollbacks after the transaction has been committed. If a failure is detected during the transaction, the whole transaction can just be rolled back, no problem. There are various options, which we’ll explore in subsequent articles, things like: Immediately restore from backup, Have a pre-tested rollback script (remembering that really this is a “roll-forward” script – there’s not really such a thing as a rollback script for a database!) Have fallback environments – for example, using a blue-green deployment pattern. Different options have pros and cons – some are easier to set up, some require more investment in infrastructure; and of course some work better than others (the key issue with using backups, is loss of the interim transaction data that has been added between the failed deployment and the restore). The best mechanism will be primarily dependent on how your application works and how much you need a cast-iron failsafe mechanism. Actions: Work out an appropriate rollback strategy based on how your application and business works, your appetite for investment and requirements for a completely failsafe process. Development Practices This is perhaps the more difficult area for people to tackle. The process by which you can deploy database updates is actually intrinsically linked with the patterns and practices used to develop that database and linked application. So you need to decide whether you want to implement some changes to the way your developers actually develop the database (particularly schema changes) to make the deployment process easier. A good example is the pattern “Branch by abstraction”. Explained nicely here, by Martin Fowler, this is a process that can be used to make significant database changes (e.g. splitting a table) in a step-wise manner so that you can always roll back, without data loss – by making incremental updates to the database backward compatible. Slides 103-108 of the following slidedeck, from Niek Bartholomeus explain the process: https://speakerdeck.com/niekbartho/orchestration-in-meatspace As these slides show, by making a significant schema change in multiple steps – where each step can be rolled back without any loss of new data – this affords the release team the opportunity to have zero-downtime deployments with considerably less stress (because if an increment goes wrong, they can roll back easily). There are plenty more great patterns that can be implemented – the book Refactoring Databases, by Scott Ambler and Pramod Sadalage is a great read, if this is a direction you want to go in: http://www.amazon.com/Refactoring-Databases-Evolutionary-paperback-Addison-Wesley/dp/0321774515 But the question is – how much of this investment are you willing to make? How often are you making significant schema changes that would require these best practices? Again, there’s a difference here between migrating old projects and starting afresh – with the latter it’s much easier to instigate best practice from the start. Actions: For your business, work out how far down the path you want to go, amending your database development patterns to “best practice”. It’s a trade-off between implementing quality processes, and the necessity to do so (depending on how often you make complex changes). Socialise these changes with your development group. No-one likes having “best practice” changes imposed on them, so good to introduce these ideas and the rationale behind them early.   Summary The next stages of implementing a continuous delivery pipeline for your database changes (once you have CI up and running) require a little pre-planning, if you want to get the most out of the work, and for the implementation to go smoothly. We’ve covered some of the checklist of areas to consider – mainly in the areas of “Getting the team ready for the changes that are coming” and “Planning our your pipeline, environments, patterns and practices for development”, though there will be more detail, depending on where you’re coming from – and where you want to get to. This article is part of our database delivery patterns & practices series on Simple Talk. Find more articles for version control, automated testing, continuous integration & deployment.

  Read the article

• JavaOne 2012 Call for Papers

  - by Tori Wieldt

  JavaOne 2012 is happening Sept. 30-Oct 4 in San Francisco. The Call For Papers for this conference is now open. Java Evangelist Arun Gupta, who was on one of the selection committees and will be again this year, provided some great tips for submission (and a peek into the submission process): JavaOne is a technology-focused conference so any product, marketing or seemingly marketish talk are put at the bottom of the list. Oracle Open World and Oracle Develop are better options for submitting product specific talks. Make your title catchy. Remember the attendees are more likely to read the abstract if they like the title. We try our best to recategorize the talk to a different track if it needs to but please ensure that you are filing in the right track to have all the right eyeballs looking at it. Also, it does not hurt marking an alternate track if your talk meets the criteria. Make sure to coordinate within your team before the submission - multiple sessions from the same team or company does not ensure that the best speaker is picked. In such case we rely upon your "google presence" and/or review committee's prior knowledge of the speaker. The reviewers may not know you or your product at all and you get 750 characters to pitch your idea. Make sure to use all of them, to the last 750th character. Make sure to read your abstract multiple times to ensure that you are giving all the relevant information ? Think through your presentation and see if you are leaving out any important aspects. Also look if the abstract has any redundant information that will not required by the reviewers. There are additional sections that allow you to share information about the speaker and the presentation summary. Use them to blow the horn about yourself and any other relevant details. Please don't say "call me at xxx-xxx-xxxx to find out the details." :-) The tracks this year are: Core Java Platform Development Tools and Techniques Emerging Langauges on the JVM Enterprise Services Architectures and the Cloud Java EE Web Profile and Platform Technologies Java ME, Java Card, Embedded, and Devices Java FX and Rich User Experiences IMPORTANT: Submit your proposal as soon as possible, the the Call for Papers closes April 9th, a mere three weeks away!  Follow these channels to get the latest news about #JavaOne 2012.  originally posted on blogs.oracle.com/javaone

  Read the article

• JavaOne 2012 Call for Papers

  - by Tori Wieldt

  JavaOne 2012 is happening Sept. 30-Oct 4 in San Francisco. The Call For Papers for this conference is now open. Java Evangelist Arun Gupta, who was on one of the selection committees and will be again this year, provided some great tips for submission (and a peek into the submission process): JavaOne is a technology-focused conference so any product, marketing or seemingly marketish talk are put at the bottom of the list. Oracle Open World and Oracle Develop are better options for submitting product specific talks. Make your title catchy. Remember the attendees are more likely to read the abstract if they like the title. We try our best to recategorize the talk to a different track if it needs to but please ensure that you are filing in the right track to have all the right eyeballs looking at it. Also, it does not hurt marking an alternate track if your talk meets the criteria. Make sure to coordinate within your team before the submission - multiple sessions from the same team or company does not ensure that the best speaker is picked. In such case we rely upon your "google presence" and/or review committee's prior knowledge of the speaker. The reviewers may not know you or your product at all and you get 750 characters to pitch your idea. Make sure to use all of them, to the last 750th character. Make sure to read your abstract multiple times to ensure that you are giving all the relevant information ? Think through your presentation and see if you are leaving out any important aspects. Also look if the abstract has any redundant information that will not required by the reviewers. There are additional sections that allow you to share information about the speaker and the presentation summary. Use them to blow the horn about yourself and any other relevant details. Please don't say "call me at xxx-xxx-xxxx to find out the details." :-) The tracks this year are: Core Java Platform Development Tools and Techniques Emerging Langauges on the JVM Enterprise Services Architectures and the Cloud Java EE Web Profile and Platform Technologies Java ME, Java Card, Embedded, and Devices Java FX and Rich User Experiences IMPORTANT: Submit your proposal as soon as possible, the the Call for Papers closes April 9th, a mere three weeks away!  Follow these channels to get the latest news about #JavaOne 2012. 

  Read the article

• First Ever MySQL on Windows Online Forum - March 16, 2011

  - by monica.kumar

  72 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Cambria","serif";} Now you might be thinking…what’s an Online Forum? Well, think of it as a virtual conference, where you can attend a series of presentations about a given topic, from the comfort of your own office/home. On Wednesday March 16th, from 9.00 am PT to 12.00, we will be running the first ever MySQL Online Forum, dedicated to MySQL on Windows. Register now to learn how you can reduce your database TCO on Windows by up to 90% while increasing manageability & flexibility!   Oracle’s MySQL Vice President of Engineering Tomas Ulin will kick off a comprehensive agenda of presentations enabling you to better understand:   How you can save up to 90% by using MySQL on WindowsWhy the world’s most popular open source database is extremely popular on Windows, both for enterprise users and for embedding by ISVs How MySQL is a great fit for the Windows environment, and what are the upcoming milestones to make MySQL even better on the Microsoft platform What are the visual tools at your disposal to effectively develop, deploy and manage MySQL applications on Windows How you can deliver highly available business critical Windows based MySQL applications Why Security Solutions Provider SonicWall selected MySQL over Microsoft SQL Server, and how they successfully deliver MySQL based solutions Plus, as we’ll have Live Chat On during the entire forum, you’ll be able to ask questions at any time to MySQL experts online. Register Now!   Whether you’re an ISV or an enterprise user, either already running MySQL on Windows or simply considering it, join us and learn how you can get performance, lower TCO and increased manageability & flexibility with MySQL on Windows!

  Read the article

• Create Custom Playlists in Windows Media Player 12

  - by DigitalGeekery

  A playlist is a group of songs or media files that are grouped together based on a theme. Today we’ll look at how to create your own custom playlists in Windows Media Player 12. Create Custom Playlists Open Windows Media Player and switch to the Library view. Click on the Play tab at the top right to reveal the List pane.   If you currently have songs listed on the List pane, you can remove them by clicking Clear list.   To add songs to your playlist, right-click on the song title, select Add to, and then click Play list. You can also drag and drop the song title right onto the play list area. Hold down the Control [Ctrl] key while clicking to select more than one track at a time.   Changing the Playlist Order You can click and drag each item in your playlist to move it up or down.   You can also right click on the title and select Move up or Move down, or to completely remove a track from your playlist. You have the option to shuffle your list by clicking the Options list icon and selecting Shuffle list from the dropdown list. By selecting Sort list by you can sort by Title, Artist, Album, Release date, and more. Saving and naming your playlist To save your playlist, click on the Save list button. You’ll be prompted to enter a name for your playlist in the text box. Click away when you are finished. Windows Media Player will display your most recent playlists in the Navigation panel. Simply select the playlist anytime you want to listen to it.   Conclusion Custom playlists are a great way to group your music by themes such as mood, genre, activity, season, and more. If you are new to Windows Media Player 12, check out our post on managing your music in Windows Media Player. Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add FilesShare Digital Media With Other Computers on a Home Network with Windows 7Install and Use the VLC Media Player on Ubuntu LinuxMake Windows Media Player Automatically Open in Mini Player ModeWhat are wmpnscfg.exe and wmpnetwk.exe and Why Are They Running? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools

  Read the article

• Convert DVDs and ISO Files to MKV with MakeMKV

  - by DigitalGeekery

  Looking for a quick and easy way to convert your DVDs or ISOs to MKV files? Today we take a look at the MakeMKV Beta which gets the job done very well. Installing and Using MakeMKV Download and install MakeMKV (See download link below) If converting a DVD, place it into your optical drive. When you open MakeMKV you will be greeted by it’s minimalistic interface. Click on the DVD to hard drive button to open the DVD, or the folder icon on the top menu to browse for an ISO file.   MakeMKV will open the disc or file. Once the disc or file is opened, you’ll see the titles listed in the window on the left. Double-click on the titles to expand the tree structure.   Remove any title or tracks you don’t want to convert by unselecting the check box to the left. On the right side of the window, click the folder icon to select browse for your file output directory. When ready, click the MakeMkv button to begin the conversion process.   Conversion will proceed.   When the conversion is finished. Click OK. That’s all there is to it! Your MKV file is ready to play. Conclusion MakeMKV is currently still in beta and during the beta phase it will rip both DVD and Blu-ray for free. However, the DVD ripping functionality will always remain free. After 30 days if you want to continue ripping Blu-ray discs, you’ll need to purchase a license. DVD rips are very quick…typically around 15-20 minutes depending on the length of the movie. MakeMKV is available for Windows, Mac, Linux and will rip and convert DVDs to MKV files. Not all media players natively support MKV playback, so if you’re having trouble playing MKV files, try downloading VLC Media player, or the latest version of the DivX codec. Download MakeMKV Similar Articles Productive Geek Tips How To Rip DVDs with VLCEasily Change Audio File Formats with XRECODEHow To Convert Video Files to MP3 with VLCConvert PDF Files to Word Documents and Other FormatsConvert DVD to MP4 / H.264 with HD Decrypter and Handbrake TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar

  Read the article

• Oracle User Productivity Kit Translation

  - by ultan o'broin

  Oracle's customers just love the User Productivity Kit (UPK). I hear only great things about it from our international customers at the Oracle Usability Advisory Board meetings too. The UPK is the perfect solution for enterprise applications training needs (I previously reviewed a fine book about UPK btw). One question I am often asked is how source content created using the UPK can be translated into another language. I spoke with Peter Maravelias, Principal Product Strategy Manager for UPK about this recently. UPK is already optimized for easy source-target translation already. There is even a solution for re-recording demos. Here's what you can do to get your source content into another language: Use UPK's ability to automatically translate events and actions. UPK comes with XML templates that allow you to accomplish this in 21 languages with a simple publishing action switch. These templates even deal with the tricky business of using gender-based translations. Spanish localization template sample Japanese localization template sample Use the Import and Export localization features to export additional custom content in a format like XLIFF, easily handled by translation tools. You could also export and import in Word format. Re-record the sound (audio) files that go with the recordings, one per screen. UPK's granular approach to the sound files means that timing isn't an option. Retiming demos isn't required. A tip here with sound files and XLFF-exported custom content is to facilitate translation context by avoiding explicit references to actions going on in the screen recordings. A text based storyboard with screenshots accompanying the sound files should also be provided to the translators. Provide a glossary of terms too. Use the re-record option in UPK to record any demo from a translated application. This will allow all the translated UI labels to be automatically captured. You may be required to resize any action events here due to text expansion issues. Of course, you will need translated data in the translated application too, so plan for this in advance. However, source-target language skills aren't required for the re-recording. The UPK Player itself, of course, is also available from Oracle along with content and doc in 21 languages. The Developer and Setup is also translated in a smaller number of languages. Check the Oracle UPK website for latest details. UPK is a super solution for global enterprise applications training deployments allowing source content to be translated into multiple languages easily. See this post on the UPK blog for more insight too!

  Read the article

• Hey You! Stop Using the Apply Button and Just Click OK! [Geek Rants]

  - by The Geek

  As a computer geek, I often find myself helping people, and watching them change settings on their PC… and they almost always click the Apply button, and then the OK button. Why? Whenever you encounter a dialog box in Windows, there are the standard OK, Cancel, Apply buttons—but you don’t actually have to click the Apply button first. The OK button does the same thing, saves the settings, and then closes the dialog box… saving you an extra click. Don’t believe me? Try it out for yourself. Only the worst possible application won’t behave that way, and you probably don’t want to use that type of application to begin with. The only exception to this rule is a multiple tab dialog box, on a badly written application. Sometimes… your settings on one tab won’t stick unless you click Apply. Note that in this particular case, you can make changes in any one of the tabs, and they will carry through without having to click Apply, because this dialog window is well written. We’re just using the screenshot as an example of a multiple tab setting interface. So now that you know better, you can tell us… do you always use the Apply button first? Have you ever found an instance where it behaves differently? Similar Articles Productive Geek Tips Got Awesome Skills? Why Not Write for How-To Geek?Customize Your Windows Vista Logon ScreenUse Outlook Rules to Prevent "Oh No!" After Sending EmailsGot Awesome Geek Skills? The How-To Geek is Looking for WritersQuick Firefox UI Tweaks TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Recycle ! Find That Elusive Icon with FindIcons Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems

  Read the article

• Bluetooth Dial-Up Networking using Blueman

  - by leemes

  I want to configure a dial up network connection via bluetooth to my phone in order to access the internet. I use Lubuntu 12.04 (Ubuntu with LXDE) which has the Network Manager Applet and Blueman applet installed. I guess these are the same tools than on an Ubuntu installation, hence I ask my question on this site. My phone is a Sony Ericsson W810i, my laptop is a Lenovo S10-2, my mobile phone provider is o2 Germany. I scanned for my mobile phone using the Blueman applet. I connected the dial-up network via the context menu - Serial Ports - Dial-up Networking. A notification bubble says that the connection is available on the interface named ppp0. ipconfig is telling something different: There is no ppp0 or something similar. I only see my eth0 (wired ethernet), eth1 (wifi) and lo interfaces. Of course, I can't ping google.com as the interface really seems to be not present at all. When the dial-up network is being connected, my mobile phone says that it connects to the internet. Afterwards, I see the active connection on the phone's screen. When successfully connecting with the phone using another computer, it behaves exactly the same, so I guess that the phone isn't the problem. I don't know if I configured the Dial-Up correctly. I use the phone number *99# which is very common on most mobile ISPs. I use the APN which my ISP is telling me to use. (I can't find the number on their support page, so I just use the default value *99#.) My mobile ISP is o2 Germany. There are How-Tos out there which use the Network Manager Applet to setup a bluetooth dial-up connection, but I can't see any bluetooth devices in the context menu as on the screenshots in those How-Tos. Do you have any suggestions what might be wrong / what I should try? EDIT: When choosing "Network Access Point" in the device's context menu instead of Serial Ports - Dial-Up Networking, an interface bnep0 appears. However, neither an IPv4 address is assigned for that interface (but IPv6), nor the phone connects to the internet. Am I missing something? Can I connect to the internet after setting up this network connection?

  Read the article

• SQL SERVER – Iridium I/O – SQL Server Deduplication that Shrinks Databases and Improves Performance

  - by Pinal Dave

  Database performance is a common problem for SQL Server DBA’s.  It seems like we spend more time on performance than just about anything else.  In many cases, we use scripts or tools that point out performance bottlenecks but we don’t have any way to fix them.  For example, what do you do when you need to speed up a query that is already tuned as well as possible?  Or what do you do when you aren’t allowed to make changes for a database supporting a purchased application? Iridium I/O for SQL Server was originally built at Confio software (makers of Ignite) because DBA’s kept asking for a way to actually fix performance instead of just pointing out performance problems. The technology is certified by Microsoft and was so promising that it was spun out into a separate company that is now run by the Confio Founder/CEO and technology management team. Iridium uses deduplication technology to both shrink the databases as well as boost IO performance.  It is intriguing to see it work.  It will deduplicate a live database as it is running transactions.  You can watch the database get smaller while user queries are running. Iridium is a simple tool to use. After installing the software, you click an “Analyze” button which will spend a minute or two on each database and estimate both your storage and performance savings.  Next, you click an “Activate” button to turn on Iridium I/O for your selected databases.  You don’t need to reboot the operating system or restart the database during any part of the process. As part of my test, I also wanted to see if there would be an impact on my databases when Iridium was removed.  The ‘revert’ process (bringing the files back to their SQL Server native format) was executed by a simple click of a button, and completed while the databases were available for normal processing. I was impressed and enjoyed playing with the software and encourage all of you to try it out.  Here is the link to the website to download Iridium for free. . Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Fixing the #mvvmlight code snippets in Visual Studio 11

  - by Laurent Bugnion

  If you installed the latest MVVM Light version for Windows 8, you may encounter an issue where code snippets are not displayed correctly in the Intellisense popup. I am working on a fix, but for now here is how you can solve the issue manually. The code snippets MVVM Light, when installed correctly, will install a set of code snippets that are very useful to allow you to type less code. As I use to say, code is where bugs are, so you want to type as little of that as possible ;) With code snippets, you can easily auto-insert segments of code and easily replace the keywords where needed. For instance, every coder who uses MVVM as his favorite UI pattern for XAML based development is used to the INotifyPropertyChanged implementation, and how boring it can be to type these “observable properties”. Obviously a good fix would be something like an “Observable” attribute, but that is not supported in the language or the framework for the moment. Another fix involves “IL weaving”, which is a post-build operation modifying the generate IL code and inserting the “RaisePropertyChanged” instruction. I admire the invention of those who developed that, but it feels a bit too much like magic to me. I prefer more “down to earth” solutions, and thus I use the code snippets. Fixing the issue Normally, you should see the code snippets in Intellisense when you position your cursor in a C# file and type mvvm. All MVVM Light snippets start with these 4 letters. Normal MVVM Light code snippets However, in Windows 8 CP, there is an issue that prevents them to appear correctly, so you won’t see them in the Intellisense windows. To restore that, follow the steps: In Visual Studio 11, open the menu Tools, Code Snippets Manager. In the combobox, select Visual C#. Press Add… Navigate to C:\Program Files (x86)\Laurent Bugnion (GalaSoft)\Mvvm Light Toolkit\SnippetsWin8 and select the CSharp folder. Press Select Folder. Press OK to close the Code Snippets Manager. Now if you type mvvm in a C# file, you should see the snippets in your Intellisense window. Cheers Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Recording Topics manually and automatically

  - by maria.cozzolino(at)oracle.com

  When you are recording UPK topics, the default mode for recording is manual recording, where you tell the system when to record each screen shot. This mode allows you to take the exact screen shot you need. However, it does get a bit tedious when you are recording long topics, especially if you forget to take a few screen shots. In UPK 3.5, a new version of recording was introduced - Automatic Recording. It was designed to simplify the recording process by automatically capturing screen shots as you perform your transaction. If you haven't experimented with Automatic Recording, I'd recommend you give it a try - it might make your recording life easier. If you are recording with sound, you can also narrate your topic while recording it. To turn on Automatic Recording: 1. In Tools/Options, there are two recorder tabs. The first tab, under content defaults, includes settings that you may want to share between developers, like whether keyboard shortcuts are automatically captured. 2. The second tab is the one that contains the personal preferences, like screen shot capture key and whether to record automatically or manually. On this tab, choose the option for Automatic Recording. 3. Save the settings. Note that this setting will NOT impact content defaults; this is for your user only. When you launch the recorder, you will notice a slightly different message with guidance on how to start and stop automatic recording. Once you start recording, the recorder window is hidden until the end of the recording session to allow you to capture your transaction. In the task tray, there is a series of icons that let you know that you are capturing content. You can pause the recording, as well as set and view your sound levels if you are using sound. A camera appears during each screen capture to help you know when the system is capturing a screen shot, and a context indicator appears to show the recognition. With automatic recording, you can let the system capture the necessary screen shots. It may provide a more natural recording experience, and is probably easier for the untrained developer. On the other hand, you have a bit more control with manual recording on which screen shot appears, but it also means you have to remember to capture the screen shot. :) We'd be interested in hearing which type of recording you do, and any rationale on why you made that choice. Please comment and let us know. --Maria Cozzolino, Manager of UPK Software Requirements and UI Design

  Read the article

• TDC: The Developer's Conference Day One

  - by Tori Wieldt

  The Developer's Conference (TDC) kicked off Wednesday in São Paulo, Brazil. With over 3000 developers in attendance over five days, it is the premier multi-community developer conference in Brazil, organized by Globalcode. Yara Senger, one of the organizers said, "We like to say multi-community rather than multi-technology because it is interesting and benefical when various communities get together. They learn so much from each other!" TDC includes tracks on Java and several other technologies, including SOA, Python, Ruby, mobile and digital TV. In the mobile track, developers who create a Java ME app will get a Nokia S40 phone!New this year at TDC is the Java University track, sponsored by Oracle.  It is aimed at university students and professionals who are new to Java. The lectures are introductory level, with an educational focus and practical exercises. The Java track and other tracks, such as SOA, mobile and Digital TV, are getting lots of help from the expertise of Brazilian JUGS members. Thanks to GoJava, JavaBahia, JavaNoroeste and SouJava!Carlos Fernando, one of the coordinators on the Digital TV track, said "My goal is to teach developers the basics of digital TV, and show them the tools used to build interactive TV applications." Fernando explained the concept of "the second screen:" that many people watch TV and have second smart device (tablet or smartphone) with them, and this creates many opportunities for developers. For example, while watching TV, a viewer can get extra content (interviews, behind the scenes) on their tablet. More interestingly, while watching their favorite TV show a viewer likes an outfit one of the actors is wearing, their smartphone can tell them where they can buy it nearby, or they can order it online immediately. Fernando exclaimed, "The opportunities for developers are nearly infinite in the area of digital TV!" At the TDC opening keynote, Debora Palermo, Oracle University country manager for Brazil, reminded attendees that Java is present in many devices, from simple to complex, and knowledge of this platform can open many doors in the labor market. She explained Oracle's Workforce Development Program (WDP), managed by Oracle University, which allows educational institutions to deliver Oracle training. WDP allows for easy and low-cost access to Oracle training in local communities across the world. "Oracle University is committed to creating the next generation of Java developers, and WDP can make that happen," Palermo said. As of March 2012, Oracle University is partnering with Globalcode to offer WDP. Students can earn official Oracle Course Certifications, a great way to learn Java.Brazilian developers that cannot attend TDC can watch live streaming.

  Read the article

• Framework 4 Features: User Propogation to the Database

  - by Anthony Shorten

  Once of the features I mentioned in a previous entry was the ability for Oracle Utilities Application Framework V4 to automatically propogate the end user to the database connection. This bears more explanation. In the past releases of the Oracle Utilities Application Framework, all database connections are pooled and shared within a channel of access. So for example, the online connections on the Business Application Server share a common pool of connections and the batch in a thread pool shares a seperate pool of connections. The connections are pooled for performance reasons (the most expensive part of a typical transaction is opening and closing connections so we save time by having them ready beforehand). The idea is that when a business function needs some SQL to be execute it takes a spare connection from the pool, executes the SQL and then returns the connection back to the pool for reuse. Unfortunelty to support the pool being started and ready before the transactions arrives means that you need to have a shared userid (as you dont know the users who need them beforehand). Therefore each connection uses the same database user to execute the SQL it needs. This is acceptable for executing transactions, generally but does not allow the DBA or other tools to ascertain which end user is actually running the transaction. In Oracle Utilities Application Framework V4, we now set the CLIENT_IDENTIFIER to the end userid (not the Login Id) when the connection is taken from the pool and used and reset it back to blank when returned to the pool. The CLIENT_IDENTIFIER is a feature that is present in the Oracle Database connection information. From a monitoring perspective, when a connection to the database is actively running SQL, the end user is now able to be determined by querying the CLIENT_IDENTIFIER on the session object within the database. This can be done in the DBA's favorite monitoring tool (even just some SQL on the v$session table is enough). This has other implications as well. Oracle sells a lot of other security addons to the database and so do third parties. If a site wants to have additional levels of security or auditing in the database then the CLIENT_IDENTIFIER, if supported, is now available to be recorded or used by those products to provide additional levels of security. This facility was one of the highly "nice to haves" that customers would ask us about so we now allow it to be used to allow finer grained monitoring and additional security facilities. Note: This facility is only available for customers using the Oracle Database versions of our products.

  Read the article

• Performance Enhancement in Full-Text Search Query

  - by Calvin Sun

  Ever since its first release, we are continuing consolidating and developing InnoDB Full-Text Search feature. There is one recent improvement that worth blogging about. It is an effort with MySQL Optimizer team that simplifies some common queries’ Query Plans and dramatically shorted the query time. I will describe the issue, our solution and the end result by some performance numbers to demonstrate our efforts in continuing enhancement the Full-Text Search capability. The Issue: As we had discussed in previous Blogs, InnoDB implements Full-Text index as reversed auxiliary tables. The query once parsed will be reinterpreted into several queries into related auxiliary tables and then results are merged and consolidated to come up with the final result. So at the end of the query, we’ll have all matching records on hand, sorted by their ranking or by their Doc IDs. Unfortunately, MySQL’s optimizer and query processing had been initially designed for MyISAM Full-Text index, and sometimes did not fully utilize the complete result package from InnoDB. Here are a couple examples: Case 1: Query result ordered by Rank with only top N results: mysql> SELECT FTS_DOC_ID, MATCH (title, body) AGAINST ('database') AS SCORE FROM articles ORDER BY score DESC LIMIT 1; In this query, user tries to retrieve a single record with highest ranking. It should have a quick answer once we have all the matching documents on hand, especially if there are ranked. However, before this change, MySQL would almost retrieve rankings for almost every row in the table, sort them and them come with the top rank result. This whole retrieve and sort is quite unnecessary given the InnoDB already have the answer. In a real life case, user could have millions of rows, so in the old scheme, it would retrieve millions of rows' ranking and sort them, even if our FTS already found there are two 3 matched rows. Apparently, the million ranking retrieve is done in vain. In above case, it should just ask for 3 matched rows' ranking, all other rows' ranking are 0. If it want the top ranking, then it can just get the first record from our already sorted result. Case 2: Select Count(*) on matching records: mysql> SELECT COUNT(*) FROM articles WHERE MATCH (title,body) AGAINST ('database' IN NATURAL LANGUAGE MODE); In this case, InnoDB search can find matching rows quickly and will have all matching rows. However, before our change, in the old scheme, every row in the table was requested by MySQL one by one, just to check whether its ranking is larger than 0, and later comes up a count. In fact, there is no need for MySQL to fetch all rows, instead InnoDB already had all the matching records. The only thing need is to call an InnoDB API to retrieve the count The difference can be huge. Following query output shows how big the difference can be: mysql> select count(*) from searchindex_inno where match(si_title, si_text) against ('people')  +----------+ | count(*) | +----------+ | 666877 | +----------+ 1 row in set (16 min 17.37 sec) So the query took almost 16 minutes. Let’s see how long the InnoDB can come up the result. In InnoDB, you can obtain extra diagnostic printout by turning on “innodb_ft_enable_diag_print”, this will print out extra query info: Error log: keynr=2, 'people' NL search Total docs: 10954826 Total words: 0 UNION: Searching: 'people' Processing time: 2 secs: row(s) 666877: error: 10 ft_init() ft_init_ext() keynr=2, 'people' NL search Total docs: 10954826 Total words: 0 UNION: Searching: 'people' Processing time: 3 secs: row(s) 666877: error: 10 Output shows it only took InnoDB only 3 seconds to get the result, while the whole query took 16 minutes to finish. So large amount of time has been wasted on the un-needed row fetching. The Solution: The solution is obvious. MySQL can skip some of its steps, optimize its plan and obtain useful information directly from InnoDB. Some of savings from doing this include: 1) Avoid redundant sorting. Since InnoDB already sorted the result according to ranking. MySQL Query Processing layer does not need to sort to get top matching results. 2) Avoid row by row fetching to get the matching count. InnoDB provides all the matching records. All those not in the result list should all have ranking of 0, and no need to be retrieved. And InnoDB has a count of total matching records on hand. No need to recount. 3) Covered index scan. InnoDB results always contains the matching records' Document ID and their ranking. So if only the Document ID and ranking is needed, there is no need to go to user table to fetch the record itself. 4) Narrow the search result early, reduce the user table access. If the user wants to get top N matching records, we do not need to fetch all matching records from user table. We should be able to first select TOP N matching DOC IDs, and then only fetch corresponding records with these Doc IDs. Performance Results and comparison with MyISAM The result by this change is very obvious. I includes six testing result performed by Alexander Rubin just to demonstrate how fast the InnoDB query now becomes when comparing MyISAM Full-Text Search. These tests are base on the English Wikipedia data of 5.4 Million rows and approximately 16G table. The test was performed on a machine with 1 CPU Dual Core, SSD drive, 8G of RAM and InnoDB_buffer_pool is set to 8 GB. Table 1: SELECT with LIMIT CLAUSE mysql> SELECT si_title, match(si_title, si_text) against('family') as rel FROM si WHERE match(si_title, si_text) against('family') ORDER BY rel desc LIMIT 10; InnoDB MyISAM Times Faster Time for the query 1.63 sec 3 min 26.31 sec 127 You can see for this particular query (retrieve top 10 records), InnoDB Full-Text Search is now approximately 127 times faster than MyISAM. Table 2: SELECT COUNT QUERY mysql>select count(*) from si where match(si_title, si_text) against('family‘); +----------+ | count(*) | +----------+ | 293955 | +----------+ InnoDB MyISAM Times Faster Time for the query 1.35 sec 28 min 59.59 sec 1289 In this particular case, where there are 293k matching results, InnoDB took only 1.35 second to get all of them, while take MyISAM almost half an hour, that is about 1289 times faster!. Table 3: SELECT ID with ORDER BY and LIMIT CLAUSE for selected terms mysql> SELECT <ID>, match(si_title, si_text) against(<TERM>) as rel FROM si_<TB> WHERE match(si_title, si_text) against (<TERM>) ORDER BY rel desc LIMIT 10; Term InnoDB (time to execute) MyISAM(time to execute) Times Faster family 0.5 sec 5.05 sec 10.1 family film 0.95 sec 25.39 sec 26.7 Pizza restaurant orange county California 0.93 sec 32.03 sec 34.4 President united states of America 2.5 sec 36.98 sec 14.8 Table 4: SELECT title and text with ORDER BY and LIMIT CLAUSE for selected terms mysql> SELECT <ID>, si_title, si_text, ... as rel FROM si_<TB> WHERE match(si_title, si_text) against (<TERM>) ORDER BY rel desc LIMIT 10; Term InnoDB (time to execute) MyISAM(time to execute) Times Faster family 0.61 sec 41.65 sec 68.3 family film 1.15 sec 47.17 sec 41.0 Pizza restaurant orange county california 1.03 sec 48.2 sec 46.8 President united states of america 2.49 sec 44.61 sec 17.9 Table 5: SELECT ID with ORDER BY and LIMIT CLAUSE for selected terms mysql> SELECT <ID>, match(si_title, si_text) against(<TERM>) as rel  FROM si_<TB> WHERE match(si_title, si_text) against (<TERM>) ORDER BY rel desc LIMIT 10; Term InnoDB (time to execute) MyISAM(time to execute) Times Faster family 0.5 sec 5.05 sec 10.1 family film 0.95 sec 25.39 sec 26.7 Pizza restaurant orange county califormia 0.93 sec 32.03 sec 34.4 President united states of america 2.5 sec 36.98 sec 14.8 Table 6: SELECT COUNT(*) mysql> SELECT count(*) FROM si_<TB> WHERE match(si_title, si_text) against (<TERM>) LIMIT 10; Term InnoDB (time to execute) MyISAM(time to execute) Times Faster family 0.47 sec 82 sec 174.5 family film 0.83 sec 131 sec 157.8 Pizza restaurant orange county califormia 0.74 sec 106 sec 143.2 President united states of america 1.96 sec 220 sec 112.2  Again, table 3 to table 6 all showing InnoDB consistently outperform MyISAM in these queries by a large margin. It becomes obvious the InnoDB has great advantage over MyISAM in handling large data search. Summary: These results demonstrate the great performance we could achieve by making MySQL optimizer and InnoDB Full-Text Search more tightly coupled. I think there are still many cases that InnoDB’s result info have not been fully taken advantage of, which means we still have great room to improve. And we will continuously explore the area, and get more dramatic results for InnoDB full-text searches. Jimmy Yang, September 29, 2012

  Read the article

• Silverlight Cream for June 19, 2011 -- #1109

  - by Dave Campbell

  In this Issue: Kunal Chowdhury(-2-), Oren Gal, Rudi Grobler, Stephen Price, Erno de Weerd, Joost van Schaik, WindowsPhoneGeek, Andrea Boschin, and Vikram Pendse. Above the Fold: Silverlight: "Multiple Page Printing in Silverlight4 - Part 3 - Printing Driving Directions" Oren Gal WP7: "Prototyping Windows Phone 7 Applications using SketchFlow" Vikram Pendse Shoutouts: Not Silverlight, but darned cool... Michael Crump has just what you need to get going with Kinect: The busy developers guide to the Kinect SDK Beta Rudi Grobler replies to a few questions about how he gets great WP7 screenshots: Screenshot Tools for WP7 From SilverlightCream.com: Windows Phone 7 (Mango) Tutorial - 14 - Detecting Network Information of the Device Squeaking in just under the posting wire with 2 more WP7.1 posts is Kunal Chowdhury ... first up is this one on grabbing the mobile operator and othe rnetwork info in WP7.1 Windows Phone 7 (Mango) Tutorial - 15 - Detecting Device Information Kunal Chowdhury's latest is on using the DeviceStatus class in WP7.1 to detect device information such as is there is a physical keyboard installed, Memory Usage, Total Memory, etc. Multiple Page Printing in Silverlight4 - Part 3 - Printing Driving Directions Oren Gal has the final episode in his Multiple Page Printing Tutorial Trilogy up... and this is *way* cool... Printing the driving directions. AgFx hidden gem - PhoneApplicationFrameEx Rudi Grobler continues his previous post about AgFX with this one talking about the PhoneApplicationFrameEx class inside AgFx.Controls.Phone.dll.. a RootFrame replacement. Binding to ActualHeight or ActualWidth Stephen Price's latest XAML snippet is about Binding to ActualHeight or ActualWidth... you've probably tried to without luck... check out the workaround. Windows Phone 7: Drawing graphics for your application with Inkscape – Part I: Tiles Erno de Weerd decided to try the 'free' route to Drawing graphics for his WP7 app, and has part 1 of a tutorial series on doing that with Inkscape. Mogade powered Live Tile high score service for Windows Phone 7 Joost van Schaik expounds on his "Catch 'em Birds" WP7 game in the Marketplace... specifically the online leaderboard using the services of Mogade. Building a Reusable ICommand implementation for Windows Phone Mango MVVM apps WindowsPhoneGeek's latest post is discussing the ICommand interface available in WP7.1, and he demontstrates how to implement a reusable ICommand Implementation and how to use it. A TCP Server with Reactive Extensions Andrea Boschin is back posting about Rx, and promises this post *will be* Silverlight related eventually :) First up though is a socket server using Rx. Prototyping Windows Phone 7 Applications using SketchFlow Vikram Pendse has a tutorial up for prototyping your WP7* apps in Sketchflow including a 5 minute video Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >