static constructor - Page 402

A "tinkered" PC can ping by IP, not by hostname. How to fix?

- by aitchnyu

Like this: root@tis-server:~# ping www.google.com ping: unknown host www.google.com root@tis-server:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=55 time=50.3 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=55 time=65.4 ms It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. It also makes route add default gw 192.168.0.1 necessary for each reboot to atleast ping by IP. How do I fix this? It is Ubuntu 11.10 As requested: Output of ifconfig: eth0 Link encap:Ethernet HWaddr 48:5b:39:ae:21:98 inet addr:192.168.0.100 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::4a5b:39ff:feae:2198/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13194 errors:0 dropped:0 overruns:0 frame:0 TX packets:5156 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1420596 (1.4 MB) TX bytes:827295 (827.2 KB) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4817 errors:0 dropped:0 overruns:0 frame:0 TX packets:4817 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:377732 (377.7 KB) TX bytes:377732 (377.7 KB) Output of resolv.conf: Output of /etc/network/interfaces: GNU nano 2.2.6 File: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.100 netmask 255.255.255.0

Read the article

Using Google App Engine to Perform World Updates vs an Authoritative Server

- by Error 454

I am considering different game server architectures that use GAE. The types of games I am considering are turn-based where the world status would need to be updated about once per minute. I am looking for an answer that persuades me to either perform the world update on the google servers OR an authoritative server that syncs with the datastore. The main goal here would be to minimize GAE daily quotas. For some rough numbers, I am assuming 10,000 entities requiring updates. Each entity update would require: Reading 5 private entity variables (fetched from datastore) Fetching as many as 20 static variables (from datastore or persisted in server memory) Writing 5 entity variables Clients of the game would authenticate and set state directly against GAE as well as pull the latest world state from GAE. Running the update on GAE would consist of a cron job launched every minute. This would update all of the entities and save the results to the datastore. This would be more CPU intensive for GAE. Running the update on an authoritative server would consist of fetching entity data from the GAE datastore, calculating the new entity states and pushing the new state variables back to the datastore. This would be more bandwidth intensive for the datastore.

Read the article

Benefits of Server-side Coding

There are numerous advantages to server scripting languages over client side languages in regards to creating web sites that are more compelling compared to a standard static site. Server side scripting are scripts that are executed on a web server during the compilation of data to return to a client. These scripts allow developers to modify the content that is being sent to the user prior to the return of the data to the user as well as store information about the user. In addition, server side scripts allow for a controllable environment in which they can be executed. This cannot be said for client side languages because the developer cannot control the users’ environment compared to a web server. Some users may turn off client scripts, some may be only allow limited access on the system and others may be able to gain full control of the environment. I have been developing web applications for over 9 years, and I have used server side languages for most of the applications I have built. Here is a list of common things I have developed with server side scripts. List of Common Generic Functionality Send Email FTP Files Security/ Access Control Encryption URL rewriting Data Access Data Creation I/O Access The one important feature server side languages will help me with on my website is Data Access because my component will be backed with a SQL server database. I believe that form validation is one instance where I might see server-side scripts and JavaScript used interchangeably because it does not matter how or where the data is validated as long as the data that gets inserted is valid. However, I would have to say that my personal experience would have to sway me in deciding what type of languages to use for form validation because they both have advantages and disadvantages based on the each situation.

Read the article

Every file on cPanel got deleted (then restored hours later), and I have no idea why

- by mcranston18

I apologize in advance if I don't provide proper detail; I am new to server stuff and am looking for general advice about this issue: I was helping out a client doing web design last month. They have about a dozen static sites on one server. The sites are all built on Joomla, except one which I built on Wordpress. Everything was working fine last month when we did the redesign but all of a sudden this morning, every single file on their server got deleted: every web page, file, and all e-mail addresses. I phoned the hosting company (alliancewww.com) to ask, "why did every single file suddenly delete off the server?" They said, "because someone must have deleted it." I said, "well no one did." (Which I'm pretty damn sure no one did.) They said, "you can pay us to look into the problem." I authorized $150 for them to look into the problem. About an hour later, everything was magically re-instated. The host said they had a back-up of everything and just restored everything. What I'm wondering: Does anyone have recommendations of logs I can go through to investigate how the files got deleted in the first place? I've checked out their cPanel logs but found nothing. Is it likely that this is a mess-up on the host's part?

Read the article

WCF - Automatically create ServiceHost for multiple services

- by Rajesh Pillai

WCF - Automatically create ServiceHost for multiple services Welcome back readers! This blog post is about a small tip that may make working with WCF servicehost a bit easier, if you have lots of services and you need to quickly host them for testing. Recently I was encountered a situation where we were faced to create multiple service host quickly for testing. Here is the code snippet which is pretty self explanatory. You can put this code in your service host which in this case is a console application. class Program { static void Main(string[] args) { // Stores all hosts List<ServiceHost> hosts = new List<ServiceHost>(); try { // Get the services element from the serviceModel element in the config file var section = ConfigurationManager.GetSection("system.serviceModel/services") as ServicesSection; if (section != null) { foreach (ServiceElement element in section.Services) { // NOTE : If the assembly is in another namespace, provide a fully qualified name here in the form // <typename, namespace> // For e.g. Business.Services.CustomerService, Business.Services var serviceType = Type.GetType(element.Name); // Get the typeName var host = new ServiceHost(serviceType); hosts.Add(host); // Add to the host collection host.Open(); // Open the host } } Console.ReadLine(); } catch (Exception e) { Console.WriteLine(e.Message); Console.ReadLine(); } finally { foreach (ServiceHost host in hosts) { if (host.State == CommunicationState.Opened) { host.Close(); } else { host.Abort(); } } } } } I hope you find this useful. You can make this as a windows service if required.

Read the article

Windows Server 2008 SOMETIMES blocks connection to an FTP Site

- by ssilver2k2

Hello Everyone Recently, our company has been having issue connecting to a special FTP server that we use offsite to upload small files. We can connect to the test server perfectly fine, but when we use the production ftp, it only randomly connects. If I plug my laptop directly into the modem and pull one of our other static IP addresses, I can connect just fine, but if I use our internal network, it is hit or miss. Also, turning OFF the firewall does NOT change the status of our connection problems. It will still time out. The weird issue is that it sometimes works, and when it does, it instantly asks for credentials and logs us on for that session, but if we disconnect and try again, it may or may not work. This also coincidentally occurred after uninstalling hamachi, and it blew away our internet settings on our Windows Server 2008 box, but everything else is working fine, and it was working fine before hamachi was installed.

Read the article

Routing Essentials

- by zharvey

I'm a programmer trying to fill a big hole in my understanding of networking basics. I've been reading a good book (Networking Bible by Sosinki) but I have been finding that there is a lot of "assumed" information contained, where terms/concepts are thrown at the reader without a proper introduction to them. I understand that a "route" is a path through a network. But I am struggling with visualizing some routing-based concepts. Namely: How do routes actually manifest themselves in the hardware? Are they just a list of IP addresses that get computed at the network layer, and then executed by the transport? What kind of data exists in a so-caleld routing table? Is a routing-table just the mechanism for holding these lists of IP address (read above)? What are the performance pros/cons for having a static route, as opposed to a dynamic route?

Read the article

Javascript Canvas Drawing Efficiency

- by jujumbura

I have just recently started some experiments with game development in Javascript/HTML5, and so far it has been going pretty well. I have a simple test scene running with some basic input handling, and a hundred-ish drawImage() calls with a few transforms. This all runs great on Chrome, but unfortunately, it already chugs on Firefox. I am using a very large canvas ( 1920 x 1080 ), but it doesn't seem like I should be hitting my limit already. So on that note, I was hoping to ask a few questions: 1) What exactly is done on the CPU vs. the GPU in terms of canvas and drawImage()? I'm afraid the answer is probably "it depends on the browser", but can anybody give me some rules of thumb? I naively imagined that each drawImage call results in a textured quad on the GPU with the canvas effectively being a render target, but I'm wondering if I'm pretty far off base there... 2) I have seen posts here and there with people saying not to use the translate(), rotate(), scale() functions when drawing on the canvas. Am I adding a lot of overhead just by adding a translate() call, as opposed to passing in the x,y to drawImage()? Some people suggest using "transate3d", etc., which are CSS properties, but I'm not sure how to use them within a scene. Can they be used for animated sprites within a single canvas? 3) I have also seen a lot of posts with people mentioning that pre-building canvases and then re-using them is a lot faster than issuing all the individual draw calls again. I am guessing that my background should definitely be pre-built into a canvas, but how far should I take this? Should I maintain an individual canvas for each sprite, to cache all static image data when not animating? Thank you much for your advice!

Read the article

Terminal closing itself after 14.04 upgrade

- by David

All was fine in 12.04, in this case I'm using virtualbox in Windows. Last days the warning message about my Ubuntu version no longer being supported was coming up pretty often, so, yesterday I finally decided to upgrade. The upgrading process ran ok, no errors, no warnings. After rebooting the errors started to happen. Just after booting up there were some errors about video, gnome, and video textures (sorry I didn't care in that moment so I don't remember well). Luckly that went away after installing VirtualBox additions. But the big problem here is that I can't use the terminal. It opens Ok when pressing control+alt+t, but most of the commands cause instant closing. For example, df, ls, mv, cd... usually work, although it has closed few times. But 'find' causes instant close. 'apt-get' update kills it too, just after it gets the package list from the sources, when it starts processing them. I've tried xterm, everything works and I have none of that problems. I have tried reinstalling konsole, bash-static, bash-completion, but nothing worked. I have no idea what to do as there is no error message to search for the cause. It seems something related to bash, but that's all I know.

Read the article

12.10 Wireless hotspot configuration and internet browsing - question

- by Indian

In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

Read the article

how to avoid flickering in awt [on hold]

- by Ishanth

import java.awt.event.*; import java.awt.*; class circle1 extends Frame implements KeyListener { public int a=300; public int b=70; public int pacx=360; public int pacy=270; public circle1() { setTitle("circle"); addKeyListener(this); repaint(); } public void paint(Graphics g) { g.fillArc (a, b, 60, 60,pacx,pacy); } public void keyPressed(KeyEvent e) { int key=e.getKeyCode(); System.out.println(key); if(key==38) { b=b-5; //move pacman up pacx=135;pacy=270; //packman mouth upside if(b==75&&a>=20||b==75&&a<=945) { b=b+5; } else { repaint(); } } else if(key==40) { b=b+5; //move pacman downside pacx=315; pacy=270; //packman mouth down if(b==645&&a>=20||b==645&&a<=940) { b=b-5; } else{ repaint(); } } else if(key==37) { a=a-5; //move pacman leftside pacx=227; pacy=270; //packman mouth left if(a==15&&b>=75||a==15&&b<=640) { a=a+5; } else { repaint(); } } else if(key==39) { a=a+5; //move pacman rightside pacx=42;pacy=270; //packman mouth right if(a==945&&a>=80||a==945&&b<=640) { a=a-5; } else { repaint(); } } } public void keyReleased(KeyEvent e){} public void keyTyped(KeyEvent e){} public static void main(String args[]) { circle1 c=new circle1(); c.setVisible(true); c.setSize(400,400); } }

Read the article

How to ssh to my dorm computer with shared public IP and no admin rights over the router?

- by Aamir

First of all, I am not a Linux or ssh newbie. I have searched for this problem on many forums extensively but nobody seemed to have discussed this. Please help me! I live in a student dorm (off-campus) and all students of the dorm share the same WAN IP (Internet or public IP), which is fortunately static. I am not an admin and have no control over the router that assigns private IP's to all of the students, so I can't really forward port 22 to my computer :( Is it still possible to establish an ssh connection to my dorm computer from a computer on campus?

Read the article

All files on automounted NTFS partition are marked as executable

- by MHC

I have set up an NTFS partition to automount via fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda7 during installation UUID=e63fa8a2-432f-4749-b9db-dab328807d04 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda4 during installation UUID=e9ad1bb4-7c1f-4ea9-a6a5-799dfad71c0a /boot ext4 defaults 0 2 # /home was on /dev/sda8 during installation UUID=eda8c755-5448-4de8-b58c-9cb75823c22d /home ext4 defaults 0 2 # swap was on /dev/sda9 during installation UUID=804ff3a7-e5dd-406a-b63c-e8f3c635fbc5 none swap sw 0 0 #Windows-Partition UUID=368CEBC57807FDCD /media/Share ntfs defaults,uid=1000,gid=1000,noexec 0 0 As you can see I have added the noexec bit to the configuration. Why? Because any file I create on or move to the partition is automatically marked as executable. The problem is that there is no way of changing that through nautilus. I cannot uncheck the "Allow executing file as program" option. The noexec option doesn't help, unfortunately. It only prevents nautilus from displaying the "run" or "read" dialog but doesn't change the executable flag. Is there any way I can fix this?

Read the article

Laptops trying to connect via wireless? Only able to connect only via wired connection

- by Chris J. Lee

It seems that all the wireless laptops in the office have disconnected and are unable to reconnect to the wifi after a terrible storm caused some power interruptions. Troubleshooting actions Verify wireless broadcasting is up With each laptop i ended up flushing their dns cache on Win 7 (ipconfig /flush ) Performed an ipconfig /all to see what the new ip is Made sure password was correct Reset the router (multiple times) restarted each laptop. Tried connecting wirelessly Am i missing some small detail ? Network information The router is a linksys/cisco WRVS4400N router. Supports a lot of fancy features i don't know how to use. We have 3 static ip's the conference room computer, the wireless printer, my computer Mostly windows machines, we have 3 mac users

Read the article

Mass editing videos on Ubuntu?

- by rick

Hi, I'm trying to add a watermark and a credits image to all of my old videos. I downloaded them off YouTube so they are all flv (H.264?). Is there some software that will allow me do simple edits in batches? I know a little bit of Python and tried looking at some of the library but they all seem like overkill (and way above my head). So is there a solution besides getting some software and going through all my videos and doing it manually? They are all mostly the same length, but it would be nice to specify a relative position for my credits. e.g. show a static image for 10 seconds when the video is at 95%

Read the article

How can I access an Apple Xserve with no I/O ports

- by DigitalJedi805

I have an Apple Xserve at my place of employment, that I stumbled across one day going through some old equipment. The Xserve has one card installed on it, being the NIC, and is labelled with the static IP adresses that it has assigned, but other than that it is totally 'headless'. I would like to put it to use ( by either rolling it over to a Linux, or Windows Server 08 environment... 0_o ) but have yet to figure out how to get into the system to manage it. I'm a frequent at StackOverflow, but this is my first SuperUser post, so please let me know if this should be on one of the affiliate sites.

Read the article

Dynamically load images inside jar

- by Rahat Ahmed

I'm using Slick2d for a game, and while it runs fine in Eclipse, i'm trying to figure out how to make it work when exported to a runnable .jar. I have it set up to where I load every image located in the res/ directory. Here's the code /** * Loads all .png images located in source folders. * @throws SlickException */ public static void init() throws SlickException { loadedImages = new HashMap<>(); try { URI uri = new URI(ResourceLoader.getResource("res").toString()); File[] files = new File(uri).listFiles(new FilenameFilter(){ @Override public boolean accept(File dir, String name) { if(name.endsWith(".png")) return true; return false; } }); System.out.println("Naming filenames now."); for(File f:files) { System.out.println(f.getName()); FileInputStream fis = new FileInputStream(f); Image image = new Image(fis, f.getName(), false); loadedImages.put(f.getName(), image); } } catch (URISyntaxException | FileNotFoundException e) { System.err.println("UNABLE TO LOAD IMAGES FROM RES FOLDER!"); e.printStackTrace(); } font = new AngelCodeFont("res/bitmapfont.fnt",Art.get("bitmapfont.png")); } Now the obvious problem is the line URI uri = new URI(ResourceLoader.getResource("res").toString()); If I pack the res folder into the .jar there will not be a res folder on the filesystem. How can I iterate through all the images in the compiled .jar itself, or what is a better system to automatically load all images?

Read the article

What is bondib1 used for on SPARC SuperCluster with InfiniBand, Solaris 11 networking & Oracle RAC?

- by user12620111

A co-worker asked the following question about a SPARC SuperCluster InfiniBand network: > on the database nodes the RAC nodes communicate over the cluster_interconnect. This is the > 192.168.10.0 network on bondib0. (according to ./crs/install/crsconfig_params NETWORKS> setting) > What is bondib1 used for? Is it a HA counterpart in case bondib0 dies? This is my response: Summary: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic. Details: bondib0 is the cluster_interconnect $ oifcfg getif bondeth0 10.129.184.0 global public bondib0 192.168.10.0 global cluster_interconnect ipmpapp0 192.168.30.0 global public bondib0 and bondib1 are on 192.168.10.1 and 192.168.10.2 respectively. # ipadm show-addr | grep bondi bondib0/v4static static ok 192.168.10.1/24 bondib1/v4static static ok 192.168.10.2/24 Hostnames tied to the IPs are node1-priv1 and node1-priv2 # grep 192.168.10 /etc/hosts 192.168.10.1 node1-priv1.us.oracle.com node1-priv1 192.168.10.2 node1-priv2.us.oracle.com node1-priv2 For the 4 node RAC interconnect: Each node has 2 private IP address on the 192.168.10.0 network. Each IP address has an active InfiniBand link and a failover InfiniBand link. Thus, the 4 node RAC interconnect is using a total of 8 IP addresses and 16 InfiniBand links. bondib1 isn't being used for the Virtual IP (VIP): $ srvctl config vip -n node1 VIP exists: /node1-ib-vip/192.168.30.25/192.168.30.0/255.255.255.0/ipmpapp0, hosting node node1 VIP exists: /node1-vip/10.55.184.15/10.55.184.0/255.255.255.0/bondeth0, hosting node node1 bondib1 is on bondib1_0 and fails over to bondib1_1: # ipmpstat -g GROUP GROUPNAME STATE FDT INTERFACES ipmpapp0 ipmpapp0 ok -- ipmpapp_0 (ipmpapp_1) bondeth0 bondeth0 degraded -- net2 [net5] bondib1 bondib1 ok -- bondib1_0 (bondib1_1) bondib0 bondib0 ok -- bondib0_0 (bondib0_1) bondib1_0 goes over net24 # dladm show-link | grep bond LINK CLASS MTU STATE OVER bondib0_0 part 65520 up net21 bondib0_1 part 65520 up net22 bondib1_0 part 65520 up net24 bondib1_1 part 65520 up net23 net24 is IB Partition FFFF # dladm show-ib LINK HCAGUID PORTGUID PORT STATE PKEYS net24 21280001A1868A 21280001A1868C 2 up FFFF net22 21280001CEBBDE 21280001CEBBE0 2 up FFFF,8503 net23 21280001A1868A 21280001A1868B 1 up FFFF,8503 net21 21280001CEBBDE 21280001CEBBDF 1 up FFFF On Express Module 9 port 2: # dladm show-phys -L LINK DEVICE LOC net21 ibp4 PCI-EM1/PORT1 net22 ibp5 PCI-EM1/PORT2 net23 ibp6 PCI-EM9/PORT1 net24 ibp7 PCI-EM9/PORT2 Outbound traffic on the 192.168.10.0 network will be multiplexed between bondib0 & bondib1 # netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ---------- --------- 192.168.10.0 192.168.10.2 U 16 6551834 bondib1 192.168.10.0 192.168.10.1 U 9 5708924 bondib0 There is a lot more traffic on bondib0 than bondib1 # /bin/time snoop -I bondib0 -c 100 > /dev/null Using device ipnet/bondib0 (promiscuous mode) 100 packets captured real 4.3 user 0.0 sys 0.0 (100 packets in 4.3 seconds = 23.3 pkts/sec) # /bin/time snoop -I bondib1 -c 100 > /dev/null Using device ipnet/bondib1 (promiscuous mode) 100 packets captured real 13.3 user 0.0 sys 0.0 (100 packets in 13.3 seconds = 7.5 pkts/sec) Half of the packets on bondib0 are outbound (from self). The remaining packet are split evenly, from the other nodes in the cluster. # snoop -I bondib0 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib0 (promiscuous mode) 100 packets captured 49 node1-priv1.us.oracle.com 24 node2-priv1.us.oracle.com 14 node3-priv1.us.oracle.com 13 node4-priv1.us.oracle.com 100% of the packets on bondib1 are outbound (from self), but the headers in the packets indicate that they are from the IP address associated with bondib0: # snoop -I bondib1 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured 100 node1-priv1.us.oracle.com The destination of the bondib1 outbound packets are split evenly, to node3 and node 4. # snoop -I bondib1 -c 100 | awk '{print $3}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured 51 node3-priv1.us.oracle.com 49 node4-priv1.us.oracle.com Conclusion: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic.

Read the article

How to Create Shortcuts to Programs on USB Drives

- by Lori Kaufman

If you work on multiple computers, you probably use a USB drive to take your favorite portable software with you. Portable application suites like PortableApps.com, CodySafe, or Lupo PenSuite, each have a main menu providing access to the programs installed into the suite. However, there may be reasons why you need to create shortcuts to programs on your USB drive. You may be using a program that does not integrate into the suite’s main menu. Or, you may not be using an official portable application suite at all, and just placing portable software in a folder on your USB drive. Maybe you prefer using shortcuts on the root of the USB drive, like a portable desktop. Whatever your reason, you can’t just create a shortcut to an application on the USB drive and place it in the root of the drive. The shortcut will always refer to the full path of the application, including the drive letter. Different computers assign different drive letters to USB flash drives, so you would have to change the drive letter for your shortcuts when it changes. You can assign a static drive letter to the USB drive. However, if you would rather not do that, there is a way to create shortcuts to programs on a USB drive using relative paths. Because Windows does not support relative paths in shortcuts, we will show you how to create a “shortcut” on the root of a USB drive by creating a batch (.bat) file and converting it to an executable (.exe) file. What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS How To Be Your Own Personal Clone Army (With a Little Photoshop)

Read the article

how to change interface ip in ifconfig with /etc/network/interfaces

- by user2478348

Hi everybody when modifiying /etc/network/interfaces, saving it and then executing ifconfig i can't see the modification i made..for example here is part of my /etc/network/interfaces: auto wlan1 iface wlan1 inet static address 192.168.0.60 netmask 255.255.255.0 gateway 192.168.0.61 you can see that the IP address of my wlan1 is 192.168.0.60 but when typing ifconfig i have this: wlan1 Link encap:Ethernet HWaddr 00:19:70:0f:c2:9c inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::219:70ff:fe0f:c29c/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:758 erreurs:0 :0 overruns:0 frame:0 TX packets:610 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:73490 (73.4 KB) Octets transmis:127883 (127.8 KB) (the inet adr:192.168.0.1 and not 198.168.0.60)..if someone can help me I'll be very thankful :)

Read the article

Cryptswap boot error - can't mount?

- by woody

I believe i have my swap set up but am not sure because on start up it says that it is something along the lines of "could not mount /dev/mapper/cryptswap1 M for manual S for skip". But it appears to be mounted? I have already tried this solution with no success. When i run free -m the output is: total used free shared buffers cached Mem: 3887 769 3117 0 54 348 -/+ buffers/cache: 366 3520 Swap: 4026 0 4026 and sudo bklid is: /dev/sda1: UUID="9fb3ccd6-3732-4989-bfa4-e943a09f1153" TYPE="ext4" /dev/mapper/cryptswap1: UUID="bd9fe154-8621-48b3-95d2-ae5c91f373fd" TYPE="swap" and cat /etc/crypttab is: cryptswap1 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 my /etc/fstab is: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=9fb3ccd6-3732-4989-bfa4-e943a09f1153 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation #UUID=bb0e378e-8742-435a-beda-ae7788a7c1b0 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 cat /proc/swaps output is: Filename Type Size Used Priority /dev/dm-0 partition 4123644 0 -1 Is my swap not setup correctly or how can i fix my boot message?

Read the article

OpenBSD has open ports in default installation

- by celil

I have been considering replacing Ubuntu with OpenBSD to improve the security on my local server. I need to have ssh access to it, and I also need it to serve static web content - so the only ports I need open are 22 and 80. However, when I scan my server for open ports after installing OpenBSD 4.8, and enabling ssh and http at /etc/rc.conf httpd_flags="" sshd_flags="" I discovered that it had several other open ports: Port Scan has started… Port Scanning host: 192.168.56.102 Open TCP Port: 13 daytime Open TCP Port: 22 ssh Open TCP Port: 37 time Open TCP Port: 80 http Open TCP Port: 113 ident ssh (22) and http (80) should be open as I enabled httpd and sshd, but why are the other ports open, and should I worry about them creating additional security vulnerabilities? Should they be open in a default installation?

Read the article

XNA 4.0, Combining model draw calls

- by MayContainNuts

I have the following problem: The levels in my game are made up of a Large Quantity of small Models and because of that I am experiencing frame rate problems. I already did some research and came to the conclusion that the amount of draw calls I am making must be the root of my problems. I've looked around for a while now and couldn't quite find a satisfying solution. I can't cull any of those models, in a worst case scenario there could be 1000 of them visible at the same time. I also looked at Hardware geometry Instancing, but I don't think that's quite what I'm looking for, because the level consists of a lot of different parts. So, what I'd like to do is combining 100 or 200 of these Models into a single large one and draw it as a whole 'chunk'. The whole geometry is static so it wouldn't have to be changed after combining, but different parts of it would have to use different textures (I think I can accomplish that with a texture atlas). But I have no idea how to to that, so does anybody have any suggestions?

Read the article

Do you think Scala will be the dominant JVM langauge, ie be the next Java? [on hold]

- by user1037729

From what I've read about Scala do far I think it has some nice features but I do not think it should be "the next Java". It might however end up being the next Java (due to fashion rather than fact) but lets not hope it does not... To me adds a lot of complexity over Java which is a simple and scalable language. Scala Pattern matching allows you to perform some type/value checking in a more concise way, this is possible in Java, Scala's pattern matching has a limit to it, you cannot continuously match deeper and deeper down the object graph, so why not just stick to Java and use decent invariants? Scala provides tuples, easy enough to make in Java, create a static factory method and it all reads nicely too. Scala provides mixins, why not just use composition? I believe Scala implicit's are bad, they can lead to code becoming complex and hard to maintain, explicitness is good. Scala provides closures, well they will be in Java 8 too. Scala has lazy keyword for lazy instantiation, this is easy enough to do in Java by calling a getter which creates the instance when needed, no hidden magic here. Scala can be used with AKKA, well so can Java, there is an Java AKKA implementation. Scala offers addition functional features but these can all be created in Java, there are many frameworks with have implemented functional features in Java. All in all Scala seems to offer is addition complexity and thats it...

Read the article

Trying to compile from source newest apache with newest openssl

- by AlexMA

I need to install apache 2.4.10 using openssl 1.0.1i. I compiled openssl from source with: $ ./config \ --prefix=/opt/openssl-1.0.1i \ --openssldir=/opt/openssl-1.0.1i $ make $ sudo make install and Apache with: ./configure --prefix=/etc/apache2 \ --enable-access_compat=shared \ --enable-actions=shared \ --enable-alias=shared \ --enable-allowmethods=shared \ --enable-auth_basic=shared \ --enable-authn_core=shared \ --enable-authn_file=shared \ --enable-authz_core=shared \ --enable-authz_groupfile=shared \ --enable-authz_host=shared \ --enable-authz_user=shared \ --enable-autoindex=shared \ --enable-dir=shared \ --enable-env=shared \ --enable-headers=shared \ --enable-include=shared \ --enable-log_config=shared \ --enable-mime=shared \ --enable-negotiation=shared \ --enable-proxy=shared \ --enable-proxy_http=shared \ --enable-rewrite=shared \ --enable-setenvif=shared \ --enable-ssl=shared \ --enable-unixd=shared \ --enable-ssl \ --with-ssl=/opt/openssl-1.0.1i \ --enable-ssl-staticlib-deps \ --enable-mods-static=ssl make (would run sudo make install next but I get an error) I'm essentially following the guide here except with newer slightly newer versions. My problem is I get a linker error when I run make for apache: Making all in support make[1]: Entering directory `/home/developer/downloads/httpd-2.4.10/support' make[2]: Entering directory `/home/developer/downloads/httpd-2.4.10/support' /usr/share/apr-1.0/build/libtool --silent --mode=link x86_64-linux-gnu-gcc -std=gnu99 -pthread -L/opt/openssl-1.0.1i/lib -lssl -lcrypto \ -o ab ab.lo /usr/lib/x86_64-linux-gnu/libaprutil-1.la /usr/lib/x86_64-linux-gnu/libapr-1.la -lm /usr/bin/ld: /opt/openssl-1.0.1i/lib/libcrypto.a(dso_dlfcn.o): undefined reference to symbol 'dlclose@@GLIBC_2.2.5' I tried the answer here, but no luck. I would prefer to just use aptitude, but unfortunately the versions I need aren't available yet. If anyone knows how to fix the linker problem (or what I think is a linker problem), or knows of a better way to tell apache to use a newer openssl, it would be greatly appreciated; I've got apache 1.0.1i working otherwise.

Search Results

Search found 17407 results on 697 pages for 'static constructor'.

Page 402/697 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409 | Next Page >

- by aitchnyu

- by Error 454

- by mcranston18

- by Rajesh Pillai

- by ssilver2k2

- by zharvey

- by jujumbura

- by David

- by Indian

- by Ishanth

- by Aamir

- by MHC

- by Chris J. Lee

- by rick

- by DigitalJedi805

- by Rahat Ahmed

- by user12620111

- by Lori Kaufman

- by user2478348

- by woody

- by celil

- by MayContainNuts

- by user1037729

- by AlexMA

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409 | Next Page >