Search Results

Search found 12895 results on 516 pages for 'multi boot'.

Page 403/516 | < Previous Page | 399 400 401 402 403 404 405 406 407 408 409 410  | Next Page >

• How could all of my hard drives fail at once?

  - by Taylor

  I have an Ubuntu 13.04 server. Today I found the box had crashed. I restarted it, and now every single hard drive's partition table is missing. (1 SSD for /boot, /, and 3 2TB drives for RAID). I have the SSD connected to a laptop VIA USB-SATA cable, and sure enough, the partition table is missing. This tells me that the Motherboard / SATA controller / software actually broke the drives, not that they just can't be read correctly. Something similar happened to only the SSD a few months ago, and I was forced to just re-partition it. How the heck could his have happened? Bad Motherboard or SATA controller?

  Read the article

• New power supply, now computer doesn't recognise hard drive?

  - by Mike

  Ok, I bought a new power supply, because my old one was too damn loud. I hooked it up to my PC, turned it on, everything is looking fine, start up detects my DVD drive, 2 hard disks.. then I get the message "BOOT FAILURE INSERT SYSTEM DISK". Now I've seen some other people talk about going into BIOS and changing the start up to the HDD and not the CD.. well I've done that and it doesn't help. If I let windows load up and it asks me to which partition I wish to install windows, no partition is present. It's as if after the initial start up the drives arn't being found. I plugged my old (but loud) PSU back in, connected up all the cables, and it works perfectly. Why does the new PSU not detect my HDD's after the first BIOS screen start up? Any ideas? :)

  Read the article

• Connecte RemoteApp to Exising Session

  - by Fowl

  Due to the slightly retardedness of an app I've got to run, I've got a server auto logging in on boot with the app on auto start. Remote desktop at my leisure to check on its status, etc. Gross, but it works. Now I've tried out RemoteApp which seems to work ok (ie. remotes the notification icon, balloons...) except for the fact that it creates a new session (and therefore instance of my app) - this confuses the heck out of app and it means that if I was using 'full' remote desktop I lose all my state. "Restrict each user to a single session" doesn't work. IIRC "Windows XP Mode" uses RemoteApp and it doesn't seem to have any trouble switching between modes. So how can I connect to a running app?

  Read the article

• Recover a Parallel Desktop 3 virtual machine in VirtualBox

  - by gregseth

  I have an old HDD image file that was used with Parallels Desktop 3. Ideally I'd like to use it in VirtualBox (conversion). In all the tutorials I found (like this one or that one) the VM must be started: there's the problem. I don't have the machine where Parallel 3 was installed anymore. I tried installing the trial version of the last version of Parallels (9) but it seem it doesn't offer the possibility to import an old VM. So here's the question: Given I can't boot the VM with Parallels Desktop, is there a way to convert the image file to another format that is bootable in VirtualBox? If it changes anything, the host is MacOS X 10.9, the guest is Windows XP.

  Read the article

• Black screen on Windows 7 right after opening Google Sketchup or Minecraft

  - by Aero

  I get a black screen on Windows 7 right after opening Google Sketchup or Minecraft. I presume there are other applications that cause this too - but I have not tried to open them. The window initially stops responding for a few seconds, before I get a black screen and my Skype call ends abruptly. I have tried waiting for a few minutes but nothing happens. I have to power down my computer and then boot it up again. This is becoming an annoyance, and I don't know what's causing it. Here are my specs, if it helps: My graphics card is an ATI RADEON XPRESS 1100. If you need any more info or if I've missed anything please ask. Thanks :-)

  Read the article

• Startup script for Windows Recovery Environment?

  - by Recovery

  I'm trying to automate the Windows 7 Recovery Environment. I want the computer to be able to boot into the Recovery Environment, automatically run some commands, and then restart back into Windows. The reason for this is that I want to use the Recovery Environment to edit some system files that are not writable while Windows is running. (Of course, this could be done using GRUB and Linux, but it would be even better if one could use the built-in Windows Recovery Environment and avoid the need to install a separate bootloader and OS.) So far, I've found out how to tell Windows 7 to reboot into the recovery environment: reagentc /boottore shutdown /r /t 0 But once the Recovery Environment loads, it opens a dialog that requires user input to continue. Instead of that dialog, I would like to be able to specify a script to run instead. Any ideas on how to accomplish this would be appreciated. Thanks!

  Read the article

• Resize the /var directory in redhat enterprise edition 4

  - by Sri

  I am running NDB mysql. the log files fills up the /var directory. therefore i cant start the ndbd service now. as a temporary fix, i have deleted the log files and again working fine. but again the log files fill up the /var directory. i got plenty of space in other partition. therefore i would like to swap the partition from one directory to /var. here if my input from df -h Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 ext3 54G 2.9G 49G 6% / /dev/cciss/c0d0p1 ext3 99M 14M 81M 14% /boot none tmpfs 1013M 0 1013M 0% /dev/shm /dev/cciss/c0d0p2 ext3 9.7G 9.7G 0 100% /var there are plenty of space in /dev/mapper/VolGroup00-LogVol00. Therefore i will like to swap 10 G space from this directory to /var. could you please help me out to solve this problem?

  Read the article

• Radeon hd 5700 monitor blank until connected HDMI device is started

  - by kaido loor

  Have win7, radeon hd 5700. When both PC monitor and HDMI device (Onkyo 607) are connected to Radeon card, the monitor diplays boot info, "starting windows, etc" but goes blank when "log into windows" should appear. Monitor comes back (w normal screen) if Onkyo and TV are turned on, not before. Multiple monitors is disabled. Really crazy. Any help appreciated. Generally, Onkyo can pick up HDMI signal ok, so at least smth works as intended.

  Read the article

• Windows 8 FN key doesn't work for brightness

  - by Airat Shigapov

  I have an Asus laptop with Windows 8 and fn+f5/fn+f6 keys (for brightness) doesn't work. In fact, they work, but they can increase/decrease the brightness only 1 time. I mean - after pressing fn+f5 once, nothing happens if I try to press fn+f5 again, before I press fn+f6. This only happens after logging in. At the login screen and during Windows boot I can adjust the brightness as I want, but after login I can't. I installed the latest ATK driver and NVIDIA graphics driver for Windows 8, and I think that my problem is related to conflict with drivers. I tried to reinstall/delete some drivers, but it didn't help. How can I detect where is the problem? Thanks.

  Read the article

• Reasons for Wi-Fi to be slower on Ubuntu compared to Windows?

  - by den-javamaniac

  I'm using 64-bit Ubuntu 12.04 and Windows 7 64 bit – dual boot on the same computer. Connecting to the same wireless network. And it turns out that on Windows I get a more stable and stronger signal than on Ubuntu. To my knowledge there's a router which serves as a gateway and then there's a cable connected to the router which goes further to ISP, so the results for both OS should be the same. I've tested the issue on both OSs at various times and it gave me the same result. The question is why? Why Ubuntu networking is worse than that of Windows?

  Read the article

• Partition and mount my secondary hard drive on CentOS 5.5 64bit?

  - by Andrew Fashion

  I am trying to prepare my second hard drive for user image uploads. Here is the current layout: # sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. I am assuming #4 is my secondary drive? How do I partition and mount it so I can begin using it? And how do I add to fstab? I understand if it's to many questions in one, just help me with whatever you can I guess :) Thank you for any help!

  Read the article

• URGENT: help recovering lost data

  - by Niels Kristian

  I have made a directory: sudo mkdir /ssd, the directory was supposed to be mounted to a raid array called md3. This was done by adding /dev/md3 /ssd auto defaults 0 0 to fstab. Then after a while where I had used the directory, I realized that I had forgotten to run sudo mount -a - and then I did, and now the data is gone. I tried to uncomment the line in fstab and run sudo mount -a but that didn't get back my data. What can I do!? CONTENT OF FSTAB: proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md3 /ssd auto defaults 0 0

  Read the article

• Ubuntu server 12.04.03 not checking disk partitions on reboot?

  - by jamesc

  My MOTD is showing: *** /dev/md2 will be checked for errors at next reboot *** *** /dev/md1 will be checked for errors at next reboot *** *** /dev/md3 will be checked for errors at next reboot *** However, a standard sudo shutdown -r now does not appear to check the disks and the message remains. My guess is that the partitions 'should' be checked and that they are not being... so how can I get Ubuntu to check the partitions at reboot and keep things nice and safe? Update - this is the output of cat /etc/fstab proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md/3 /home ext4 defaults 0 0 Update 2 - One message gone... Using @christianwolff's suggestions... sudo rm /var/lib/update-notifier/fsck-at-reboot sudo touch /forcefsck sudo shutdown -r now And now the motd is down to *** /dev/md1 will be checked for errors at next reboot *** *** /dev/md3 will be checked for errors at next reboot *** So 'md2(ext4)' has been checked and the message updated.

  Read the article

• Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

  - by Chake

  here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

  Read the article

• Win XP shut down window very slow to appear

  - by Heckmaier

  Hi all, I click Start-Shut Down and the Shut Down window takes 5 minutes to appear. This problem doesn't happen after a fresh boot, it only happens after I have been logged on for awhile. I am using a MacBookPro with Bootcamp. The machine actually shuts down quickly, its just really slow to bring up the shut down window. Basically I would like to know if: 1) Anyone has any ideas why this would happen 2) Who owns the "Shut Down" window (i.e. what happens on the OS after I click the Shut Down icon in the start menu) I've tried perusing the task manager to try and see if any processes look suspicious, but to no avail. thanks, H

  Read the article

• formating a hard drive for use in an asus aspire one d250

  - by paynes_bay

  I have an Asus Aspire One D250 that's out of warranty and whose hard drive is giving the click of death. I'm trying to use a spare SATA HDD I have but am having some difficulty. I have a USB CD drive that I plugged into the computer but when I tried to boot off of a Windows XP SP3 install CD the hard drive wasn't recognized. I tried to format the hard drive in another computer and then plug the hard drive into the Asus Aspire and although this gets me to the Windows XP loading screen it crashes before it gets into Windows, itself. Even in Safe Mode. I also tried to install Windows XP off of a USB stick but it seemed to hang during the install process. As in the next day it was still in the blue screen installer. Any ideas?

  Read the article

• How to mount a iSCSI/SAN storage drive to a stable device name (one that can't change on re-connect)?

  - by jcalfee314

  We need stable device paths for our Twinstrata SAN drives. Many guides for setting up iSCSI connectors simply say to use a device path like /dev/sda or /dev/sdb. This is far from correct, I doubt that any setup exists that would be happy to have its device name suddenly change (from /dev/sda to /dev/sdb for example). The fix I found was to install multipath and start a multipathd on boot which then provides a stable mapping between the storage's WWID to a device path like this /dev/mapper/firebird_database. This is a method described in the CentOS/RedHat here: http://www.centos.org/docs/5/html/5.1/DM_Multipath/setup_procedure.html. This seems a little complicated though. We noticed that it is common to see UUIDs appear in fstab on new installs. So, the question is, why do we need an external program (multipathd) running to provide a stable device mount? Should there be a way to provide the WWID directly in /etc/fstab?

  Read the article

• Wireless Disconnects Randomly, then won't reconnect

  - by Nironan12

  Okay, so I have a Gateway laptop, with Windows Vista SP2, and a Linksys-Cisco WRT54GL Wireless-G Broadband Router. When I boot up my laptop, it automatically connects itself to my home network. Then at random times, it disconnects itself from said network. I go to reconnect it, but I get an unknown error and none of Vista's suggestions are working. Sometimes, after 5-10 minutes, it will reconnect itself. I've already tried updating the firmware. I can't install any other firmware, or make a factory reset. My dad owns the router and buys the internet and he won't let me TOUCH it. I can't do ANYTHING to it.

  Read the article

• Prevent Windows 7 from unpluging External HDD [migrated]

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• How to stop live network traffic displayed in terminal?

  - by Jakobud

  For our network we are working on building a new firewall box and we just installed Smoothwall on it to test it out. When I start up the box, before the login prompt even appears, all of the live IP traffic is appearing in the terminal (source/destination IPs, MACs, Ports, etc). I wait for the boot sequence to finish, but all I see is this IP traffic. The login prompt never comes up. I finally get sick of waiting and press CTRL + C and it says "Entering Run Level 3" and then I get a login prompt finally. Once I login, the IP traffic continues to fly through the terminal even as I'm trying to type commands. How do I turn this stuff off? Is this the default setting for Smoothwall to have all this IP traffic going by on the screen? It essentially renders using the terminal to being useless.

  Read the article

• "SIOCSIFADDR: No such device" after restoring backup

  - by Paul Tomblin

  I bought some new hardware, and tried to restore my backup on it. When I boot, I don't get a network connection. If I type "ifup eth0" on the command line, I see the messages: SIOCSIFADDR: No such device eth0: No such device lspci shows an ethernet controller (Intel 82546GB). ifconfig does not show any controller except loopback. I tried installing bare Debian on the machine and the network worked then, but now I want to make it like my old machine was. Googling this problem only seems to find people having this problem in VMs. I'm not in a VM.

  Read the article

• Why does Resource Monitor in windows 7 show half my memory as "Hardware Reserved"?

  - by Brandon

  Does anyone know why in Windows 7 Resource Monitor shows that I have 8 GB of RAM installed on my computer, but I only have 3.2 GB available as 4.8 GB are in "Hardware Reserve". I researched this issue and tried going into msconfig and making sure that in the boot options the number of processors and max memory options were turned off. I also opened the computer up and reseated each of the memory sticks while clearing out any dust that was in there. Some info on the system I am using: OS: Windows 7 Enterprise 64-bit Edition CPU: AMD Phenom X4 9750 Memory: 4 X 2GB DDR2 memory Motherboard: MS-7548 (Aspen) Any help would be much appreciated.

  Read the article

• Transferring to a SSD using Windows Explorer?

  - by Nick

  I've just bought a new SSD (regretting this already) which I want to make my primary hard drive on my new computer. It's a fresh Windows 8 install, so I'm wondering if I can just copy the entire contents of C: onto my new SSD drive, or will I need to copy other things too such as boot records? I don't have a CD drive unfortunately (I removed it to put in the SSD - it's a very small HTPC) and I don't have any USB stick to make a bootable copy of Clonezilla or similar. UPDATE: I have decided to re-install Windows 8 from scratch onto the SSD, the problem is obtaining the serial key that is embedded into the BIOS. I actually have a spare, unused product key from my desktop I'm writing on now, but I'd rather not use that when I already have a valid key in my new HTPC :( Thanks :)

  Read the article

• XPS M1730 Freezing & Crashing unexpectedly

  - by evesirim

  I have a Dell XPS M1730, freshly installed with Windows 7 Professional 32-bit that every so often crashes completely unexpectedly. It need not be running any applications at all for this to happen, never mind anything particularly intensive. It also clearly is not a BSoD issue as no Minidump files are being created in the process. All drivers are up to date and have been both rolled back and then updated and the Device Manager reports no issues. There are very few applications installed on the machine and it has only been online once. It runs a minimal boot of Win7 and yet still after all of this something is making it crash. All of this suggests to me it may be more like a hardware problem but to be honest I really have no idea - so I thought I'd try here. Any thoughts...? Many thanks in advance

  Read the article

• Can't delete files in XP

  - by maaartinus

  On Windows XP I've made a copy of my home directory. Now I want to remove it, but there's a directory with two files which I can't get rid of: N:\COPY-OF-HOME\Local Settings\Application Data\Microsoft\CardSpace The directory is read-only, and I can't change it (access denied). Cacls shows the following Everyone:(special access:) READ_CONTROL SYNCHRONIZE FILE_READ_ATTRIBUTES BUILTIN\Administrators:(special access:) READ_CONTROL SYNCHRONIZE FILE_GENERIC_READ FILE_READ_DATA FILE_READ_EA FILE_READ_ATTRIBUTES and I can't change it either. I do have the administrator privileges. For copying I didn't use any fancy tool, so I'd expect me to be the owner of the copy. Why can't I delete it? Do I need to boot Linux?

  Read the article

< Previous Page | 399 400 401 402 403 404 405 406 407 408 409 410  | Next Page >