Search Results

Search found 24922 results on 997 pages for 'programming real life'.

Page 403/997 | < Previous Page | 399 400 401 402 403 404 405 406 407 408 409 410  | Next Page >

• Why do programmers have to learn for their whole lives and aren't you afraid of that?

  - by serg555

  Programming technologies are evolving so fast that programmers constantly have to learn more and more to catch up whether you want it or not. Often it is not just learning more in the same direction but starting from a scratch. Lets say you were a topnotch programmer in 1999 who quit for 10 years and went to a job interview in 2009 (funny even to imagine) - how much of your knowledge is still needed? And if we take a carpenter, engineer, doctor or even mathematician - they all are still good specialists after 10 years. So why programming is so not stable? Is it because it is just relatively new or because something important is still missing after 50 years and we can't find it to settle in that direction? Do you think after some time situation will change? Learning something new all the time is exciting and all, but it is starting to worry me that as I become older it will be harder and harder. After all "you can't teach an old dog new tricks" and I'm afraid that at the end I just end up behind college students and become one of those "cobol dinosaurs", only it will be probably "java dinosaurs" by that time.

  Read the article

• Simplest possible rack app -> permission error

  - by 7stud

  Here's the program(1.rb) blah blah blah blah blah blah: require 'rack' my_rack = lambda { |env| [200, {}, ["Hello. The time is: #{Time.now}"]] } handler = Rack::Handler::WEBrick handler.run(my_rack, :PORT => 12_500) Here's the error (blah blah blah blah blah): ~/ruby_programs$ ruby 1.rb [2012-12-07 21:49:09] INFO WEBrick 1.3.1 [2012-12-07 21:49:09] INFO ruby 1.9.3 (2012-04-20) [x86_64-darwin10.8.0] [2012-12-07 21:49:09] WARN TCPServer Error: Permission denied - bind(2) [2012-12-07 21:49:09] WARN TCPServer Error: Permission denied - bind(2) /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/utils.rb:85:in `initialize': Permission denied - bind(2) (Errno::EACCES) from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/utils.rb:85:in `new' from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/utils.rb:85:in `block in create_listeners' from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/utils.rb:82:in `each' from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/utils.rb:82:in `create_listeners' from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/server.rb:82:in `listen' from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/server.rb:70:in `initialize' from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/httpserver.rb:45:in `initialize' from /Users/7stud/.rvm/gems/ruby-1.9.3-p194@programming/gems/rack-1.4.1/lib/rack/handler/webrick.rb:10:in `new' from /Users/7stud/.rvm/gems/ruby-1.9.3-p194@programming/gems/rack-1.4.1/lib/rack/handler/webrick.rb:10:in `run' from 1.rb:5:in `<main>' ~/ruby_programs$ Here's line 85 of ../webrick/utils.rb: sock = TCPServer.new(ai[3], port) If I replace the code in 1.rb with this: require 'socket' server = TCPServer.new 12_000 # Server bind to port 2000 loop do client = server.accept # Wait for a client to connect client.puts "Hello !" client.puts "Time is #{Time.now}" client.close end I don't get any errors, and if I enter the address: http://localhost:12000/ in my browser, I get the expected output: Hello ! Time is 2012-12-07 18:58:15 -0700

  Read the article

• How can I add a portrait layout on top of a landscape Camera SurfaceView?

  - by user319919

  I need a Camera SurfaceView for my application. The camera should be set to fixed landscape view which is done by setting android:screenOrientation="landscape" for the activity in the AndroidManifest.xml. After doing some experiments and Google researches trying to use setRotation(int) inside the camera preview implementation, I came to the conclusion, that it is obviously the common practice to get a preview with correct behaviour. Now the camera preview itself looks fine for landscape orientation. But I need to have an overlay that holds a bunch of buttons. Due to usability the user interface should be in portrait view (or even better orientation aware). There seemed no other option to me, but to fix the activity screenOrientation, so that the camera preview looks normal (in portrait mode the whole view is streched and rotated to the left) Is there a workaround to get my buttons back to portrait orientation? Or another overall approach to deal with the camera view? Parameters.setRotation(int) obvisouly didnt work. I am quite new to the Android plattform programming. Of course I dont know much about the programming tricks and workarounds yet. I did a lot of research over the last two weeks, but couldnt find the right solution so far.

  Read the article

• Java (or possibly other languages) learning path

  - by bgo

  I am familiar (as a self-learner) with C, python and php such that i can solve some problems involving simple steps (for example, i easily do calculations for physics lab reports with python which normally would take 4x-5x times longer with a calculator). The point here is, as doing such things, i learnt the idea / concepts of programming language and problem solving along with oop or fuctional programming etc. Recently i have started Java and, with the familiarity of other languages, i am doing well for starters but i need guidence. -I am thinking of learning syntax from sun java tutorials and then practicing with codingbat.com or similar sites. I need a reference book that i can study deeper aspects of the topics i am learning. What do you suggest about these? -The problem is (and always have been) the lack of practice. I need coding and problem-solving practices sources. I stuck at the point where i can't figure out what to do next. Can you suggest any source (possibly like codingbat)? If i could plan a learning trail, i can progress faster and efficiently. So i need ideas, comments, suggestions. Thanks in advance.

  Read the article

• Design Pattern for error handling in ASP.NET 3.5 site

  - by Kevin

  I am relatively new to ASP.NET programming, and web programming in general. We have a site we recently ported from .NET 1.1 to 3.5. Currently we have two methods of error handling: either catching the error during data load on a page and displaying the formatted error in a label on the page, or redirecting to a generic error page. Both of these are somewhat annoying, as right now I'm trying to redesign how our errors are displayed. We are soon moving to Master pages, and I'm wondering if there is a way to "build in" an error handling control. What I mean by this is using a ASP.NET user control I've designed that simply gets passed the error string returned from the server. If an error occurs, the page would not display the content, and instead display the error control. This provides us with the ability to retain the current banner/navigation during an error (which we don't get with the generic error page), as well as keeping me from having to add the control to every aspx page we have (which I have to do with using the label-per-page system). Does something like this make sense? Ultimately I just want to have the error control added to a single page, and all other pages have access to it directly. Is this something Master pages help with? Thanks!

  Read the article

• How do I read text from a serial port?

  - by user2164

  I am trying to read data off of a Windows serial port through Java. I have the javax.comm libraries and am able to get some data but not correct data. When I read the port into a byte array and convert it to text I get a series of characters but no real text string. I have tried to specify the byte array as being both "UTF-8" and "US-ASCII". Does anyone know how to get real text out of this? Here is my code: while (inputStream.available() > 0) { int numBytes = inputStream.read(readBuffer); System.out.println("Reading from " + portId.getName() + ": "); System.out.println("Read " + numBytes + " bytes"); } System.out.println(new String(readBuffer)); System.out.println(new String(readBuffer, "UTF-8")); System.out.println(new String(readBuffer, "US-ASCII")); the output of the first three lines will not let me copy and paste (I assume because they are not normal characters). Here is the output of the Hex: 78786000e67e9e60061e8606781e66e0869e98e086f89898861878809e1e9880 I am reading from a Hollux GPS device which does output in string format. I know this for sure because I did it through C#. The settings that I am using for communication which I know are right from the work in the C# app are: Baud Rate: 9600 Databits: 8 Stop bit: 1 parity: none

  Read the article

• Java problem: Could not find main class HelloWorld

  - by Newbie

  I am new to java(a real novice). I installed Java 1.7.0 in the following folder C:\Program Files\Java The environment variable which I set are CLASSPATH : C:\Program Files\Java\jdk1.7.0\jre\lib\rt.jar; Path : C:\Program Files\Java\jdk1.7.0\bin; JAVA_HOME : C:\Program Files\Java; I have presented here the class names which are in my system. Next I wrote a program(HelloWorld.java) import java.io.*; class HelloWorld { public static void main(String[] args) { System.out.println("Hello World!"); } } When I am compiling using javac HelloWorld.java it is compiling fine. But after I issue java HelloWorld I am encountering the below error Error: Could not find main class HelloWorld Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld at sun.launcher.LauncherHelper.checkAndLoadMain(LauncherHelper.java:198) Caused by: java.lang.ClassNotFoundException: HelloWorld at java.net.URLClassLoader$1.run(URLClassLoader.java:299) at java.net.URLClassLoader$1.run(URLClassLoader.java:288) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:287) at java.lang.ClassLoader.loadClass(ClassLoader.java:422) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:325) at java.lang.ClassLoader.loadClass(ClassLoader.java:355) at sun.launcher.LauncherHelper.checkAndLoadMain(LauncherHelper.java:195) After a bit of google search I found that may be something wrong in the environment variable. I tried to play with that but no luck. I know that it may be a very simple thing for the real java developers(actually basic) but for me as of now no luck! I even RESTARTED the machine and then again I tried to run but with same fate. OS: Windows XP(Version 2002) with Service pack 3 Help needed . Thanks .

  Read the article

• check whether mmap'ed address is correct

  - by reddot

  I'm writing a high-loaded daemon that should be run on the FreeBSD 8.0 and on Linux as well. The main purpose of daemon is to pass files that are requested by their identifier. Identifier is converted into local filename/file size via request to db. And then I use sequential mmap() calls to pass file blocks with send(). However sometimes there are mismatch of filesize in db and filesize on filesystem (realsize < size in db). In this situation I've sent all real data blocks and when next data block is mapped -- mmap returns no errors, just usual address (I've checked errno variable also, it's equal to zero after mmap). And when daemon tries to send this block it gets Segmentation Fault. (This behaviour is guarantedly issued on FreeBSD 8.0 amd64) I was using safe check before open to ensure size with stat() call. However real life shows to me that segfault still can be raised in rare situtaions. So, my question is there a way to check whether pointer is accessible before dereferencing it? When I've opened core in gdb, gdb says that given address is out of bound. Probably there is another solution somebody can propose.

  Read the article

• Best way to randomly select rows *per* column in SQL Server

  - by LesterDove

  A search of SO yields many results describing how to select random rows of data from a database table. My requirement is a bit different, though, in that I'd like to select individual columns from across random rows in the most efficient/random/interesting way possible. To better illustrate: I have a large Customers table, and from that I'd like to generate a bunch of fictitious demo Customer records that aren't real people. I'm thinking of just querying randomly from the Customers table, and then randomly pairing FirstNames with LastNames, Address, City, State, etc. So if this is my real Customer data (simplified): FirstName LastName State ========================== Sally Simpson SD Will Warren WI Mike Malone MN Kelly Kline KS Then I'd generate several records that look like this: FirstName LastName State ========================== Sally Warren MN Kelly Malone SD Etc. My initial approach works, but it lacks the elegance that I'm hoping the final answer will provide. (I'm particularly unhappy with the repetitiveness of the subqueries, and the fact that this solution requires a known/fixed number of fields and therefore isn't reusable.) SELECT FirstName = (SELECT TOP 1 FirstName FROM Customer ORDER BY newid()), LastName= (SELECT TOP 1 LastNameFROM Customer ORDER BY newid()), State = (SELECT TOP 1 State FROM Customer ORDER BY newid()) Thanks!

  Read the article

• Ant fileset's "dir" missing from absolute path when using a mapper

  - by spaaarky21

  I've been trying to write an Ant task to "compile" Sass scripts in my project using the apply task but I kept getting a "No such file or directory" error. I thought it might have been caused by spaces in the buildpath so I went through the trouble of moving the project only to find that Ant seems to omitting the fileset's root directory when it returns the path. This is what the target looks like: <target name="sass-compile" depends="properties"> <apply executable="sass"> <srcfile /> <targetfile /> <fileset dir="${project.src.dir}" includes="**/*.scss" /> <globmapper from="*.scss" to="*.css" /> </apply> </target> To help troubleshoot, I switched the executable from sass to echo and I noticed that the mapper is transforming paths like this... /Users/me/Documents/Programming/workspace/Project/src/java/com/proj/web/page/template/Template.scss ...into this... /Users/me/Documents/Programming/workspace/Project/java/com/proj/web/page/template/Template.css Notice that the src directory is missing from the target file path. Am I seeing a bug here or is this somehow expected? I would love to know what's going on here. I have also tried using a regexpmapper, and a filtermapper with replacestring. The result is the same. I'm running Ant 1.7.1, which comes bundled with Eclipse Helios, which I'm running on a Mac. I also tried Ant 1.8 on both Mac and Linux. Nothing works. Does anyone have any ideas?

  Read the article

• Preferred way of application initialization

  - by lisak

  Do you guys have your own little framework for project startups ? I mean, every time one needs to do the same things at the beginning: Context initialization - ideally after arguments are processed. Sometimes without interactive user input, sometimes with input reader. Sometimes we need to load properties, sometimes not. Then we need to get a class out of context and run its method. Programming....programming until writing shell script to place everything on classpath. It's true that it differs according to the actual needs. But it seems to me, that I'm doing always almost the same, again and again from the scratch. Sometimes I realize that I'm postponing my work just because I don't want to do these annoying startups. It would be great if there was some kind of universal Main class doing reflection to specified bean, context initialization, argument parsing, interactive user input reading and have the programmer do the important things...All setup might be done via spring configuration. I think I'll have to do it by myself. I'd appreciate your ideas

  Read the article

• background image shows up on right-click show image, but not on webpage

  - by William

  okay, so I'm trying to set up a webpage with a div wrapping two other divs, and the wrapper div has a background, and the other two are transparent. How come this isn't working? here is the CSS: .posttext{ float: left; width: 70%; text-align: left; padding: 5px; background-color: transparent !important; } .postavi{ float: left; width: 100px; height: 100%; text-align: left; background-color: transparent !important; padding: 5px; } .postwrapper{ background-image:url('images/post_bg.png'); background-position:left top; background-repeat:repeat-y; } and here is the HTML: <div class="postwrapper"> <div class="postavi"><img src="http://prime.programming-designs.com/test_forum/images/avatars/hacker.png" alt="hacker"/></div><div class="posttext"><p style="color: #ff0066">You will have bad luck today.</p>lol</div> </div> Edit: at request, here is a link to the site: http://prime.programming-designs.com/test_forum/viewthread.php?thread=33 Edit: edited css to be correct, still suffering same problem

  Read the article

• Why Doesn't UIWebView release all of its memory?

  - by Theory

  I have a graphic-intensive iPad app that features a UIWebView. Using the simulator (iOS 4.2.1), I can see Real Mem increase quite a lot as I browse. The more I browse, the more RAM it uses. When I close the UIWebView and release it, some of the memory it used is freed, but not all of it. This is annoying. Okay, so maybe it's because it isn't deallocated right away. Fine. But then I would expect the system to do some cleanup when there's a memory warning. However, if I browse around, then close the UIWebView (and release it), then trigger a memory warning in the simulator, Real Mem does not change! WTF? So why is this? Why isn't UIWebView better at releasing memory back to the system? And why doesn't it appear to respond to memory warnings? Am I missing something?

  Read the article

• Git as mercurial client? Why no git-hg?

  - by aapeli

  This is a question that's been bothering me for a while. I've done my homework and checked stackoverflow and found at least these two topics about my question: Git for Mercurial like git-svn and Git interoperability with a Mercurial repository I've done some serious googling to solve this issue, but so far with no luck. I've also read the Git Internals book, and the Mercurial Definitive Behind the Scenes to try to figure this out. I'm still a bit puzzled why I haven't been able to find any suitable git-hg type of a tool. From my perspective hg-svn is one of the main features, why I've chosen to use git over mercurial also at work. It allows me to use a workflow I like, and nobody else needs to bother, if they don't care. I just don't see the point in using the intermediate hg repo to convert back and forth, as suggested in one of the chains. So anyway, from what I've read hg and git seem very similar in conceptual design. There are differences under the hood, but none of those should prevent creating a git client for hg. As it seems to me, remote tracking branches and octopus merges make git even more powerful than hg is. So, the real question, is there any real reason why git-hg does not exist (or at least is very hard to find)? Is there some animosity from git users (and developers) towards their hg counterparts that has caused the lack of the git-hg tool? Do any of you have any plans to develop something like this, and go public with it? I could volunteer (although with very feeble C-skills) to participate to get this done. I just don't possess the full knowledge to start this up myself. Could this be the tool to end all DVCS wars for good?

  Read the article

• Record Disappeared from Mysql Table, How Can I Find Out What Happened?

  - by Jascha

  I got the fire alarm phone call, AIM messages and email today from a client stating "The site is down!, WTF happened?!" Well, after a little digging, it turns out one of the records in a table had been wiped clean, but without removing the row itself. So, I had the representation of data, but a bunch of empty fields. (needless to day I need to write into my code a catch for this.) What my real question is, where can I figure out what happened? I've got access to phpmyadmin and that's about it. I found some access logs on in the root directory of my server, but that just tells me the client was in the admin area I built editing that record, I'd like to know specifically what they did that made all of the data go away. (what query was run etc...) is it possible without real server admin access? is there a neat little php to mysql class that returns data like this? Thanks in advance. -Jascha

  Read the article

• Do you like Twisted?

  - by Luca

  I use Python Twisted for web development, and I don't like it? I know async programming is a great idea, I know there are may async web servers now, I know it's the only way to solve some problems you'd have with threads but I don't like. The problem is that, you're forced to program in a twisted way. So, the architecture you have in mind, very often have to be modified to fit the way twisted works. The architecture have to follow the technology, I don't think this is good. When we use callback in javascript, we don't have too many difficulties: things are usually simpler, we use a callback in response to an Ajax call. But in a server web app things are, very often, a bit more complex. Writing chain of callbacks don't seem to me a wonderful way of programming. The code is not simple, and so it is difficult to understand and to maintain. Writing twisted code we very often lost the linear intuitive idea of the algorithm we wanted to implement, especially when things grow in complexity. What's your point of view?

  Read the article

• How can I improve this search usability?

  - by Craig Whitley

  This is the first real programming attempt of mine, and theres some major flaws. It's a learning project, and I'm currently re-writing the entire thing as my php is is really messy. I really want to get an idea on how I can improve the actual usability and accesibility of the site at the same time though - so I know how to implement it correctly. The website is basically a comparison website for gameserver hosting. As I mentioned, its a learning project and I don't actually expect any revenue from it. At the moment theres only test data in it, so in the game input box select either 'Battlefied Bad Company 2' or 'Call of Duty 4: Modern Warfare' and ignore the actual search results. http://www.laglessfrag.com I wasn't really sure how to work the search functionality. Basically when you click a game in the drop down box, it sends an ajax request and finds all the locations available to that specific game in the database. After selecting the country theres another ajax to find all the citys available to the game in that country - which gives me the two unique identifiers I need to create the search results. One major and fundamental flaw is that without javascript enabled, the site ceases to function. I'll overcome that in the next re-write, but without the ajax functionality stopping the user 'going wrong' - how can I implement a search that requires two fields without creating extra steps in new pages after form submissions? I'm also no designer so my whole layout and css is a bit rubbish, but this was mainly a learning project as I'm interested in applications / programming rather than design. It's also slow as its on shared hosting, but if I can get it to work correctly then I'm not impartial to chucking a bit of money at it for faster hosting and maybe a bit of advertising and seeing where it goes (if anywhere!). Any info appreciated.

  Read the article

• how useful is Turing completeness? are neural nets turing complete?

  - by Albert

  While reading some papers about the Turing completeness of recurrent neural nets (for example: Turing computability with neural nets, Hava T. Siegelmann and Eduardo D. Sontag, 1991), I got the feeling that the proof which was given there was not really that practical. For example the referenced paper needs a neural network which neuron activity must be of infinity exactness (to reliable represent any rational number). Other proofs need a neural network of infinite size. Clearly, that is not really that practical. But I started to wonder now if it does make sense at all to ask for Turing completeness. By the strict definition, no computer system nowadays is Turing complete because none of them will be able to simulate the infinite tape. Interestingly, programming language specification leaves it most often open if they are turing complete or not. It all boils down to the question if they will always be able to allocate more memory and if the function call stack size is infinite. Most specification don't really specify this. Of course all available implementations are limited here, so all practical implementations of programming languages are not Turing complete. So, what you can say is that all computer systems are just equally powerful as finite state machines and not more. And that brings me to the question: How useful is the term Turing complete at all? And back to neural nets: For any practical implementation of a neural net (including our own brain), they will not be able to represent an infinite number of states, i.e. by the strict definition of Turing completeness, they are not Turing complete. So does the question if neural nets are Turing complete make sense at all? The question if they are as powerful as finite state machines was answered already much earlier (1954 by Minsky, the answer of course: yes) and also seems easier to answer. I.e., at least in theory, that was already the proof that they are as powerful as any computer.

  Read the article

• Reading numpy arrays outside of Python

  - by Abiel

  In a recent question I asked about the fastest way to convert a large numpy array to a delimited string. My reason for asking was because I wanted to take that plain text string and transmit it (over HTTP for instance) to clients written in other programming languages. A delimited string of numbers is obviously something that any client program can work with easily. However, it was suggested that because string conversion is slow, it would be faster on the Python side to do base64 encoding on the array and send it as binary. This is indeed faster. My question now is, (1) how can I make sure my encoded numpy array will travel well to clients on different operating systems and different hardware, and (2) how do I decode the binary data on the client side. For (1), my inclination is to do something like the following import numpy as np import base64 x = np.arange(100, dtype=np.float64) base64.b64encode(x.tostring()) Is there anything else I need to do? For (2), I would be happy to have an example in any programming language, where the goal is to take the numpy array of floats and turn them into a similar native data structure. Assume we have already done base64 decoding and have a byte array, and that we also know the numpy dtype, dimensions, and any other metadata which will be needed. Thanks.

  Read the article

• Best way to randomly select columns from random rows of SQL results.

  - by LesterDove

  A search of SO yields many results describing how to select random rows of data from a database table. My requirement is a bit different, though, in that I'd like to select individual columns from across random rows in the most efficient/random/interesting way possible. To better illustrate: I have a large Customers table, and from that I'd like to generate a bunch of fictitious demo Customer records that aren't real people. I'm thinking of just querying randomly from the Customers table, and then randomly pairing FirstNames with LastNames, Address, City, State, etc. So if this is my real Customer data (simplified): FirstName LastName State ========================== Sally Simpson SD Will Warren WI Mike Malone MN Kelly Kline KS Then I'd generate several records that look like this: FirstName LastName State ========================== Sally Warren MN Kelly Malone SD Etc. My initial approach works, but it lacks the elegance that I'm hoping the final answer will provide. (I'm particularly unhappy with the repetitiveness of the subqueries, and the fact that this solution requires a known/fixed number of fields and therefore isn't reusable.) SELECT FirstName = (SELECT TOP 1 FirstName FROM Customer ORDER BY newid()), LastName= (SELECT TOP 1 LastNameFROM Customer ORDER BY newid()), State = (SELECT TOP 1 State FROM Customer ORDER BY newid()) Thanks!

  Read the article

• What is the best database structure for this scenario?

  - by Ricketts

  I have a database that is holding real estate MLS (Multiple Listing Service) data. Currently, I have a single table that holds all the listing attributes (price, address, sqft, etc.). There are several different property types (residential, commercial, rental, income, land, etc.) and each property type share a majority of the attributes, but there are a few that are unique to that property type. My question is the shared attributes are in excess of 250 fields and this seems like too many fields to have in a single table. My thought is I could break them out into an EAV (Entity-Attribute-Value) format, but I've read many bad things about that and it would make running queries a real pain as any of the 250 fields could be searched on. If I were to go that route, I'd literally have to pull all the data out of the EAV table, grouped by listing id, merge it on the application side, then run my query against the in memory object collection. This also does not seem very efficient. I am looking for some ideas or recommendations on which way to proceed. Perhaps the 250+ field table is the only way to proceed. Just as a note, I'm using SQL Server 2012, .NET 4.5 w/ Entity Framework 5, C# and data is passed to asp.net web application via WCF service. Thanks in advance.

  Read the article

• Moving inserted container element if possible

  - by doublep

  I'm trying to achieve the following optimization in my container library: when inserting an lvalue-referenced element, copy it to internal storage; but when inserting rvalue-referenced element, move it if supported. The optimization is supposed to be useful e.g. if contained element type is something like std::vector, where moving if possible would give substantial speedup. However, so far I was unable to devise any working scheme for this. My container is quite complicated, so I can't just duplicate insert() code several times: it is large. I want to keep all "real" code in some inner helper, say do_insert() (may be templated) and various insert()-like functions would just call that with different arguments. My best bet code for this (a prototype, of course, without doing anything real): #include <iostream> #include <utility> struct element { element () { }; element (element&&) { std::cerr << "moving\n"; } }; struct container { void insert (const element& value) { do_insert (value); } void insert (element&& value) { do_insert (std::move (value)); } private: template <typename Arg> void do_insert (Arg arg) { element x (arg); } }; int main () { { // Shouldn't move. container c; element x; c.insert (x); } { // Should move. container c; c.insert (element ()); } } However, this doesn't work at least with GCC 4.4 and 4.5: it never prints "moving" on stderr. Or is what I want impossible to achieve and that's why emplace()-like functions exist in the first place?

  Read the article

• Web development: Haskell or Scheme

  - by Robert E. Lester

  I would like to to choose one of these languages for building web applications. I'm not interested in framework per say, but have the following needs: Rapid development. Easy to scale. Strong community for the web. Quick and easy to deploy. I'm very familiar with Haskell, and have some familiarity with scheme (in particular PLT). Scheme appeals to me as good candidate for web development due to it's simple syntax which is homogenous across libraries. I state this despite my subjective opinion that Haskell is a 'cleaner' language. Haskell web apps seem to require learning and building a patchwork of different combinator libraries. On the plus side, I realise this can be quite expressive, although I'd prefer to eliminate impedance mismatches where possible. While scheme-plt looks to be a good fit, I can find but one example of it being used in the "real world". Haskell doesn't seem to fair too much better here, but there seems to be a bigger community behind the web side. Please help me make up my mind. For the most part I'm interested in real-world use cases.

  Read the article

• How can I provide users with the functionality of the DBUnit DatabaseOperation methods from a web in

  - by reckoner

  I am currently updating a java-based web application which allows database developers to create stored procedure regression test suites for database testing. Currently, for test setup, execution and clean-up stages, the user is provided with text boxes where they are able to enter SQL code which is executed by the isql command. I would like to extend the application to use DB Unit’s DatabaseOperation methods to provide more ways to setup the state of the database than just SQL statements. The main reason for using Db Unit rather than just SQL statements is to be able to create and store xml and xls DataSets on a server where they can be associated with their test cases and used for data setup. My question is: How can I provide users with the functionality of the DBUnit DatabaseOperation methods from a web interface? I have considered: Creating a simple programming language and a parser to read some simple syntax involving the DB Unit method names which accept a parameter being the file location to an xml or xls DataSet. I was thinking of allowing the user to register the files they need with the web app which would catalogue them and provide each file with an identifier which could passed as a parameter to the methods in this simple programming language. Creating an XML DTD which provides the user with the ability to specify operations and parameters. If I went this approach, how can I execute the methods and their parameters that I parse from the XML document? Creating a table in the database which stores the method and a FK relation to a catalogued DataSet file, however I don’t think this would be good solution due to the fact that data entry would be tedious. Thanks for your help.

  Read the article

• Understanding Symbols In Ruby

  - by Kezzer

  Despite reading this article, I'm still confused as to the representation of the data in memory when it comes to using symbols. If a symbol, two of them contained in different objects, exist in the same memory location, then how is it that they contain different values? I'd have expected the same memory location to contain the same value. As a quote from the link: Unlike strings, symbols of the same name are initialized and exist in memory only once during a session of ruby I just don't understand how it manages to differentiate the values contained in the same memory location. EDIT So let's consider the example: patient1 = { :ruby => "red" } patient2 = { :ruby => "programming" } patient1.each_key {|key| puts key.object_id.to_s} 3918094 patient2.each_key {|key| puts key.object_id.to_s} 3918094 patient1 and patient2 are both hashes, that's fine. :ruby however is a symbol. If we were to output the following: patient1.each_key {|key| puts key.to_s} Then what will be output? "red", or "programming"? FURTHER EDIT I'm still really quite confused. I'm thinking a symbol is a pointer to a value. Let's forget hashes for a second. The questions I have are; can you assign a value to a symbol? Is a symbol just a pointer to a variable with a value in it? If symbols are global, does that mean a symbol always points to one thing?

  Read the article

< Previous Page | 399 400 401 402 403 404 405 406 407 408 409 410  | Next Page >