Search Results

Search found 12758 results on 511 pages for 'desktop customization'.

Page 404/511 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

• Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

  - by pst007x

  I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

  Read the article

• Slow USB 3.0 speeds

  - by Cygnus X

  Long time forum forager, first time poster. I bought a Toshiba 500 GB usb 3.0 hard drive last week and instantly ran home to see how fast I could push it. On my desktop (that I built) I was able to get 200 MB/sec. On my laptop (MSI FX something or other), which I dual boot Windows 7/Ubuntu 11.10, I was able to get about 120 MB/sec on Windows, but on Ubuntu, i get about 25 MB/sec. lsusb shows: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Bus 002 Device 003: ID 1532:0015 Razer USA, Ltd Bus 004 Device 002: ID 0480:a007 Toshiba America Info. Systems, Inc. lspci -vvv shows that the USB 3.0 host controller is using the kernel driver in use is xhci_hcd. dmesg |grep usb shows: [ 1815.455368] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1815.475459] scsi7 : usb-storage 4-1:1.0 The built in disk utility says its connected via usb at 705 MB/s, but that's not what it reports when I transfer files over to it. Not really sure what to do at this point. Any help would be very nice, thank you.

  Read the article

• tunneling x11vnc through ssh on a non standard port to ubuntu computer tightvnc

  - by user72372

  I have been stuck with setting up my virtual desktop on my ubuntu laptop. I am running ubuntu to ubuntu with x11vnc I start the process on my laptop as follows: " ssh -L5904:localhost:5900 -p Port remoteuser@remoteip." That command works, then I start x11vnc server, "x11vnc -noncache -once -shared -rfbauth ~/.vnc/passwd." This command works and starts connection. Then I open another window on my laptop and type, export VNC_VIA_CMD='/usr/bin/ssh -2 -c aes128-cbc -x -p Port -l User -f -: %L:%H:%R %G sleep 20' (not sure if works). then I type, vncviewer -endcodings Tight -depth 8 -quality 1 -via IPofremotemachine -u remoteuser localhost:01. The first time it work but from now on it just gives me the vncviewer -help screen everytime. I type in the password for my remote machine and then shows -help screen for vncviewer. I think the problem is with Tightvnc viewer but don't know what. Please help. I got some info on www.vanemery.com/Linux/VNC/vnc-over-ssh.html?.

  Read the article

• I receive the error 'grub-install /dev/sda failed' while attempting to install Ubuntu as the computer's only OS.

  - by Liath

  I am attempting to install Ubuntu on a box which was previously running Windows 7. I have also experienced the dreaded "Unable to install GRUB" error. I am not attempting to dual boot. I have previously run a Windows boot disk and removed all existing partitions. If I run the Ubuntu 12.04 install CD and click install after the config screens, I get the error Executing 'grub-install /dev/sda' failed. This is a fatal error. (It is the same error as this question: Unable to install GRUB) All the questions I've read while looking for a solution are related to dual boot. I'm not interested in dual boot, I'm after a clean out the box Ubuntu install. How can I achieve this? (For my sanity, please use very simple instructions when responding. I don't claim to have any talent either for linux or as a sysadmin) Additional details copied from comments dated: 2012-05-29 ~15:19Z After booting from the CD, clicking Try Ubuntu, and then sudo fdisk /dev/sda I get fdisk: unable to seek on /dev/sda: Invalid argument sudo fdisk /dev/sdb gives Device contains neither a valid DOS partiion table, nor Sun, SGI or OSF disklabel. Building a new DOS disklabel with disk identifier 0x15228d1d. Changes will remain in memory only until you decide to write them. After that of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite). Command (m for help): I should add the Live CD desktop is graphically bad. I've got missing parts of programs and the terminal occasionally reflects to the bottom of the screen. But I can't imagine this is related.

  Read the article

• Issue with image lightbox and enlargement / Jquery Mobile

  - by Matt

  I'm working on a redesign of my weather website using Jquery Mobile. I have it set up so that you drill down through a series of content containers to get to the weather info (each group of info opens in a dialog display). Everything's worked well, but I've run into an issue with my images. I have them sized so that they fit a mobile device's screen nicely, but because of that, when you look at them in a desktop browser, you can't really make out what the image is. I've tried several image lightbox / enlargement solutions, but for some reason, none of them have worked. Either nothing happens or the images open in a new window. I thought that this might be caused by Jquery Mobile somehow overwriting the scripts and css of the lightbox / enlargements I've tried. I'm not completely sure though that this is the case, and if it is, how I can get around it to be able to enlarge the images to their original size, preferably onclick. Here is a working (for the most part - still some kinks to work out) example. If you look under the "Tropical" section at the "Satellite-Derived Products", you'll see what I mean. http://www.suncoaststormwatch.com/Beta/Index.html

  Read the article

• getting started as a web developer [closed]

  - by kmote

  I have over 10 years of programming experience building (Windows-based) desktop applications and utilities (VC++, C#, Python). My goal over the next year is to start transitioning to web application development. I want to teach myself the fundamental tools and technologies that would be considered essential for building professional, online, interactive, visually-stunning, data-driven web apps -- the kind described in Google's recently released "Field Guide: Building Great Web Applications". So my question is, what are the primary, most commonly-used technologies that seasoned professionals will need in their tool belt in the coming years? My plan was to start coming up to speed in Javascript, HTML5, & CSS, and then to do a deep dive into ASP.NET and Ajax, along with SQL DBs. (I was surprised to not be able to find a single book at Amazon with a broad, general scope like this, which caused me to start second-guessing this approach.) So, seasoned professionals: am I on the right track? Are there some glaring omissions in my list? Or some unnecessary inclusions? I would welcome any book suggestions along these lines as well.

  Read the article

• How to plan/manage multi-platform (mobile) products?

  - by PhD

  Say I've to develop an app that runs on iOS, Android and Windows 8 Mobile. Now all three platforms are technically in different program languages. The only 'reuse' that I can see is that of the boxes-and-lines drawings (UML :) charts and nothing else. So how do companies/programmers manage the variation of the same product across different platforms especially since the implementation languages differ? It's 'easier' in the desktop world IMO given the plethora of languages and cross-platform libraries to make your life easier. Not so in the mobile world. More so, product line management principles don't seem to be all that applicable - what is same and variant doesn't really matter - the application is the same (conceptually) and the implementation is variant. Some difficulties that come to mind: Bug Fixing: Applications maybe designed in a similar manner but the bug identification and fixing would be radically different. A bug on iOS may/may-not be existent for that on Android. Or a bug fix approach on one platform may not be the same on another (unless it's a semantic bug like a!=b instead of a==b which would require the same 'approach' to fixing in essence Enhancements: Making a change on one platform would be radically different than on another Code-Design Divergence: They way the code is written/organized, the class structures etc., could be very different given the different implementation environments - leading to further reuse of the (above) UML models. There are of course many others - just keeping the development in sync and making sure all applications are up to the same version with the same set of features etc. Seems the effort is 3x that of a single application. So how exactly does one manage this nightmarish situation? Some thoughts: Split application to client/server to minimize the effect to client side only (not always doable) Use frameworks like Unity-3D that could take care of the cross-platform problem (mostly applicable to games and probably not to other applications etc.) Any other ways of managing a platform line? What are some proven approaches to managing/taming the effects?

  Read the article

• Black login screen Ubuntu 12.04 if WGA cable pluged in on reboot

  - by Sulliwane

  I'm using Ubuntu 12.04.1, 64 bits, installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge). I have this annoying problem : When I startup the computer, I get a CLI login prompt : At this moment, if I press enter, i get the usual CLI login prompt. If not, here is what I get : From now, if I login using CLI, i identify the lightdm processus, kill and start it : #ps -A | grep lightdm #sudo kill -9 1273 #sudo lightdm and miracle, these commands bring back the gui login screen. BUT It's very annoying as I have to repeat these steps at every boot, and the people using this desktop are not familiar with linux at all! So I tried to figure out the cause and here is what I found : If, when I shutdown the computer, the WGA cable is not pluged in, then Ubuntu will boot on GUI login screen without a glitch! But If the WGA cable is pluged in when shuting down, I will get CLI login prompt... Note 1: I installed linux kernel 3.4, but it hasn't solve the problem. Note 2: Is it linked to the new HD 4000 integrated graphic processor ? Note 3: If i boot on an USB stick (Ubuntu 12.04), NO problems ! Note 4: If booting on the SSD, when clicking "shutdown" button, the shutdown process never ends up (logout screen keep displaying and fans are still rolling). But if booting on USB stick, the shutdown action runs properly.

  Read the article

• Most suited technology for browser games?

  - by Tingle

  I was thinking about making a 2D MMO which I would in the long run support on various plattforms like desktop, mac, browser, android and ios. The server will be c++/linux based and the first client would go in the browser. So I have done some research and found that webgl and flash 11 support hardware accelerated rendering, I saw some other things like normal HTML5 painting. So my question is, which technology should I use for such a project? My main goal would be that the users have a hassle free experience using what there hardware can give them with hardware acceleration. And the client should work on the most basic out-of-the-box pc's that any casual pc or mac user has. And another criteria would be that it should be developer friendly. I've messed with webgl abit for example and that would require writing a engine from scratch - which is acceptable but not preferred. Also, in case of non-actionscript, which kind language is most prefered in terms of speed and flexability. I'm not to fond of javascript due to the garbage collector but have learned to work around it. Thank you for you time.

  Read the article

• Ubuntu 12.04 Network Manager: unable to save manual setting to set up a static ip

  - by Andy

  I am fairly familiar with setting up servers, and ubuntu is generally my flavor of choice, but I just installed 12.04 desktop and I am seeing some behavior in network manager that is really puzzling. The network connection works fine if I leave it set on dhcp, but I would like a static IP address for my new web server. When I go into network manager and edit the connection for the one and only NIC I can select MANUAL from the dropdown menu but as soon as I do the Save button becomes greyed out. Even after filling out all fields for the connection it is still grey and I am unable to save the static IP connection information. Any thoughts would be greatly appreciated. I'm hoping there is just some new setting that I am unaware of.... On another note, if I stop the network manager and go edit the interfaces file (and the appropriate hosts/routes/dns files), I do get a static ip address assigned and I can contact my server from the outside, however, the server cannot find the internet. Can't ping even its own ip... I can ping the loopback interface though. I'm really confused on this one. Hoping someone can offer some help.

  Read the article

• SEO and external sites that serve responsive images (like Re-SRC)

  - by Baumr

  Re-SRC is a tool that allows you to automatically serve responsive images for your website from their cloud servers. It delivers a new image file each time the browser window (viewport) is resized. To use it in your HTML when linking to an image, you would do the following: <img src="http://app.resrc.it//www.your-domain.com/img/img001.jpg"/> Some more background for SEO considerations: As an example, looking at their demo page's code, the src of the Arc de Triomphe photo — when the browser window is resized to be at a tablet-width — shows this particular file at it's widest. It is found under the following URL: http://app4-uk.resrc.it/s=w560,pd1/ro=h//www.resrc.it/img/demo/demo-image-1.jpg If the viewport is increased to desktop-width, then a smaller image is served in line with the design; see this URL: http://app4-uk.resrc.it/s=w320,pd1/ro=h//www.resrc.it/img/demo/demo-image-1.jpg If I change the viewport to be about half-way between those two, then the image's URL is: http://app4-uk.resrc.it/s=w240,pd1/ro=h//www.resrc.it/img/demo/demo-image-1.jpg In other words, I found that there is a separate file for every 10-pixel increment of the image width. Very cool for saving bandwidth on mobile devices and service responsive/retina images on others, but... Here are two problems I see for SEO: The img on your site, part of your semantic markup, will not be hosted on your site at all, or even a server you control. Any links to these images will pass on "link juice" to Re-SRC's site instead. You are serving a vast array of different image files to different people — some may link to one, others to another size. Then there's the question of what different search engine crawlers will see. Also: There seems to be no fallback option if their servers are down. Do you see any other concerns? Or, perhaps, do you not see those as concerns?

  Read the article

• The right way to add images to Monogame/Windows

  - by ashes999

  I'm starting out with MonoGame. For now, I'm only targeting Windows (desktop -- not Windows 8 specifically). I've used a couple of XNA products in the past (raw XNA, FlatRedBall, SilverSprite), so I may have a misunderstanding about how I should add images to my content. How do I add images to my project? Currently, I created a new Monogame project, added a folder called "Content," and added images under there; the only caveat is that I need to set the Copy to Output Directory action to one of the Copy ones. It seems strange, because my "raw" XNA project just last week had a Content project in it (XNA Framework Content Pipeline, according to VS2010), which compiled my images to XNB (I think). It seems like Monogame doesn't use the same content pipeline, but I'm not sure. Edit: My question is not about "how do I get the XNA content pipeline to work with Monogame." My question is "why would I want to use the XNA content pipeline in Monogame?" Because there are (at least) two solutions (that I see today): Add the images to the Monogame project and set the Copy to Output Directory options to copy. Add a XNA content pipeline project and add my images to that instead; reference it from my MOnogame project. Which solution should I use, and why? I currently have a working version with the first option.

  Read the article

• Ubuntu running like mud, system hangs and looks like its running at 3FPS

  - by user240803

  the system specks: AMD XP 3200+ 1GB DDR 333 RAM 160 GB HD IDE NVIDIA FX 5500 AGP Video Card Compaq Presario sr1230nx the system takes forever to boot and when it does it runs like total mud, reminds me of an overloaded system that has too many windows open or something... fresh install tried soo many thing like new memory (it had 512 stick) a new video card (onboard 8mb sis sounded like the problem, but wasn't... has gotten a little faster now but not by much) tried to disable all the things on the motherboard that could be, with no help... this machine runs windows XP, 7, and 8 JUST FINE!!! I mean for a single core CPU WIN8 runs AWESOME!!! BUT I already have a Gaming Desktop that has Windows 8 pro I want a Linux machine to get some time in and learn a few things... I want Ubuntu because of the Software center so I can install things I want until I am familiar with the command line.. I've worked on Computers since I was 12 I remember some of the DOS commands but I guess these are a little different... anyway any ideas? Ive also tried both drivers for the NVIDA card and that didn't help either... its not the card since it did this with both the NVIDA card and the SIS onboard... it also does this on live mode with the USB so I don't think its the HardDrive... I'm running out of options of hardware to try... I know this version of Linux works cuz Ive booted it on other machines and it ran great... what is with this Compaq? here is a vid of exactly what its doing... let me know if you need anything else I am right by the comptuer tonight so ask anything... http://youtu.be/-P-XNo81098

  Read the article

• Is there a shell-independent HUD-like menu search tool for Gnome?

  - by Redsandro

  The Ubuntu HUD - you love it or you hate it. Personally I rather like a classic desktop, so I use Xfce and Cinnamon, and I don't want to lose my menu in applications. But the HUD is pretty awesome when your menus are complex and you forgot where an option sits. This makes that search trick very interesting. I know the HUD is Unity specific. I am looking for a HUD-like tool to complement the menu in shells other than Unity. There is Appmenu Runner for KDE that does this. There is also appmenu-qt for KDE. Problem with the above is that it uses KDE libs, and it only works for KDE apps. This is Linux, there aught to be something like this for GNOME/GTK apps, right? Looking for any tool that can search the menus. I already use(d) Kupfer and Gnome-do, something like that would suffice if only it includes searching the menus for the currently focussed application.

  Read the article

• Error -12 hibernation image. Not enough free memory (sometimes)

  - by user99306

  I am having a problem with hibernation in Ubuntu 12.10, it had worked fine in 12.04. When I try and hibernate it sometimes appears to hibernate throws up an error and returns me to the desktop. The error I get is this: PM: Creating hibernation image: PM: Need to copy 375021 pages PM: Normal pages needed: 117957 + 1024, available pages: 110205 PM: Not enough free memory PM: Error -12 creating hibernation image Now I understand what the error means, but it doesn't make sense. My swap file is 5GB and is seldom ever used as I have 4GB of RAM. I know it is recommended to have 1.5 times more swap than RAM etc, but space doesn't seem to be the problem, despite the error. For example, I rarely use more than about 25%-30% of my RAM, yet still have the problem above. Moreover on a fresh boot and login, with no programs open and using only about 12% of RAM, I can get the above error - yet at other times I can hibernate whilst using 25% of my RAM. Also if I keep trying to hibernate, it eventually does after throwing up the above error four or five times. A successful hibernation looks like this: PM: Creating hibernation image: PM: Need to copy 295511 pages PM: Normal pages needed: 95534 + 1024, available pages: 132627 Is there some setting that I need to tweak or something I need to do before hibernating to avoid this problem? I guess the question could be better interpreted as: Is there some way of safely flushing the buffers and the cache before hibernation? Other than attempting to hibernate several times until it is successful! Thanks in advance.

  Read the article

• Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

  - by user42424

  So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

  Read the article

• How to shutdown Windows 8 PC without using mouse?

  - by Gopinath

  Windows 8 sports a re-imagined desktop and tablet user interface with touch friendly Metro looks. One of the major changes in Windows 8 for a common users  is the lack of start menu, with which we got friended for more than a decade. On Windows 8 we would be missing it. As there is no start menu in Windows 8, the way you shutdown a Windows 8 computer is a bit different. To shutdown using Mouse, you need to hover on the top right edge of the screen to open the hidden menu,  go to "Settings"  tab -> "Power" -> Then choose for "Shut down", "Sleep" or "Restart".  That’s a lot of Mouse movement work and if you are a power user then you may not like to do that. How about shutting down the PC using Keyboard? Here are the two ways to shutdown the PC using keyboard Keyboard shortcuts With the help of keyboard shortcuts you can navigate to Power options of Windows 8. Press Win + C to bring the Settings Charm and use Arrows and Enter keys to navigate to access Shutdown menu. This is one of the easiest way to shutdown the PC without using Mouse. Run Command If you don’t like to go through the Setting menu, you can use the traditional Run commands. Press Win + R to open Run dialog and enter the command shutdown -s -t 0 to immediately shutdown the PC.

  Read the article

• Hard time installing Ubuntu

  - by Nick

  I have a MSI GT780DXR that currently is booting windows 7. I've been trying to dual boot windows 7 and ubuntu for some time now. Here's specs that I think would make a difference Windows 7 500GB*2 RAID 0 hard drives. (Hardware RAID I'm not sure if it's a dedicated RAID card though) 7200RPM Nvidia GT570M Background: I tried to install 12.04 (64 bit) a few times but the Desktop live cd and pendrive boots with a black screen. I've tried wubi but it boots to a black screen as well. I then tried the alternative 12.04 (64 bit) and went through the installation all the way til partitioning. I let Ubuntu notice the raid setup and I setup my swap, /, and home drives, I used my free space to create the three partitions. I tried to resize the windows drive and it told me I couldn't and to be happy with my current setup. When I finally got past I got an error on installing GRUB 2 and decided to skip it and continued on to finish installation. When I tried to boot up I got an invalid partition table error. Windows recovery disc, and a GPARTED live cd couldn't find any hard drives. I ended up following advice and typed this into the recovery command prompt. bootrec /fixmbr bootrec /fixboot bootrec /rebuildBcd It worked and here I am now. The question is, how would I be able to dual boot windows 7 and Ubuntu 12.04 with this information? Thanks,

  Read the article

• How can I get the best performance for playing games?

  - by Oli

  I've been playing a couple of Wine-games today and decided to switch to metacity to see what the performance difference was like. If you've never done it before, you just run metacity --replace but don't do that if you use Unity! Anyway, surprise surprise it was like playing on a dedicated Windows gaming machine. Playing under metacity today was bliss. Much higher framerates and just a fluidity that you'd expect from a native game. I'm not sure I can go back. Switching to metacity is no hardship but I wonder if there's anything else in the WM landscape that I should try out. I'm essentially looking for suggestions for the best way to play games. Mix up WMs, dedicated X sessions, whatever... As long as it makes Wine games run faster. Small print One process per answer (eg: New X session + OpenBox) We should probably land on a benchmark so we can show percentage improvement over a stock Compiz desktop. I'm open to suggestions in the comments. If people could test it and submit their how much it improves things for them in the comments, that would give others a good idea of if it's worth the pain.

  Read the article

• Virtualbox install 12.04 guest: "pae not present"

  - by Peter.O

  I get this message while trying to install Ubuntu 12.04 as a guest in VirutalBox 4.1.18, on an Ubuntu 10.04 host. This kernel requires the following feature not present on the CPU: pae Some host specs: The host's kernel is: Linux 2.6.32-41-generic-pae GNU/Linux lscpu (host): Architecture: i686, CPU op-mode(s): 32-bit, 64-bit grep --color=always -i PAE /proc/cpuinfo   does show pae in its output. The 12.04 iso used is: ubuntu-12.04.0-desktop-i386.iso As a comparison/check, I downloaded and installed Linux Mint 13 Cinnamon to the same host on the exact same VM (I just changed the .iso image). It worked fine. Its iso is: linuxmint-13-cinnamon-dvd-32bit.iso It seems (to me) that I have pae.. what is going on here? Update: I had assumed that Linux Mint also required pae (being Ubuntu based), but I've just run;   grep --color=always -i PAE /proc/cpuinfo   in the Mint VM.   It showed no output.   So it seems the issue may lie with VirtualBox.   If that is the case, how can I get Virtualbox into pae mode?

  Read the article

• Why can't I boot from portable HD?

  - by user11239

  I've been trying to get Ubuntu 10.04-LTS 32-bit desktop installed onto a 250GB FreeAgent Go drive from Seagate. I've been able to install onto a USB flash drive and boot successfully from this. I have installed Ubuntu onto the jump drive using Universal USB Installer, and this was a total success in terms of getting Ubuntu to run off a flash drive. I was unable to accomplish this with the portable HDD. I then, following instructions, attempted to install the OS onto the HDD once booted up from the flash drive. After installing the OS on the HDD, the computer would simply not load the OS when the HDD medium was selected for booting from. However, as there is no System-> Preferences-> Removable Drives and Media I could not complete this step. Is this vital? How do I do this under Ubuntu 10.04? I have formmated the MBR on the HDD and repeated the above, still with no success. I have also browsed some forums that mention there may be something related to spin-up speeds, but nothing explained in detail the issue or how to solve it, and I'm not familiar enough with system booting to understand if this could be an issue. Basically, what I'm trying to do is get Ubuntu to boot off the HDD, I've attempted several things, and the result is, after selecting the HDD from BIOS, the OS never starts booting (after waiting upwards of ten minutes). I just have a white cursor blinking. I can always get it to boot from the jump drive. Related question

  Read the article

• Custom distro using ubuntu 12.04

  - by user89707

  I am creating the custom operating system using the ubuntu 12.04. When ubuntu login from the light dm -- it shows ubuntu desktop . i need to change to the my os name. I need to replace the ambaince dark icon to fs icon by default for all the login and live cd. How to permanentely change the os name It should not change even the customer update the operating system too. I am using the remastersys. I am looking to develop the new distro. like mint ,, If i had an breif explanation of the creation of the repository and maintaining the updates . it will be more helpfull. Kindly provind the link for creating the full fledged os based on the ubuntu .. like mint, Snowlinux, etc did.. replace the grub with burg for default installation If remastersys is not good . then provide me some other tool to create . I am not having the high speed internet

  Read the article

• What You Said: How You Set Up a Novice-Proof Computer

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your tips and tricks for setting up a novice-proof computer; read on to see how your fellow readers ensure friends and relatives have a well protected computer. Image available as wallpaper here. If you only listen to a single bit of advice from your fellow readers, let that advice be the importance of separate and non-administrative user accounts. Grant writes: I have two boys, now 8 and 10, who have been using the computer since age 2. I set them up on Linux (Debian first, now Ubuntu) with a limited rights account. They can only make a mess of their own area. Worst case, empty their home directory and let them start over. I have to install software for them, but they can’t break the machine without causing physical damage (hammers, water, etc.) My wife was on Windows, and I was on Debian, and before they had their own, they knew they could only use my computer, and only logged in as themselves. All accounts were password protected, so that was easy to enforce. What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

  Read the article

• Custom LightDM sessions to launch an application

  - by zachtib

  I'm trying to set up Ubuntu to act as a kiosk running a custom application, and am trying to get a LightDM session built to automatically start it. Ideally, I'd like to have two sessions available from LightDM. The default would start my application fullscreened, and the other would open a minimal desktop in case any configuration (mostly connecting to a wireless network) needed to be done. I've done a lot of research over the last week on custom LightDM & Gnome sessions. I've got a custom greeter written for LightDM that can start either session, but I can't figure out how to add a specific application to the Gnome session that is ultimately started without just putting a launcher in the global startup directory, and I don't want to do that since I don't want the application starting when they open "configuration mode". Another problem I've run into on my current workaround is that the application doesn't fullscreen properly, which makes me think I'm not starting enough of a gnome session (currently it's just metacity, no panel or anything else). Edit: I found a solution. See http://www.webupd8.org/2011/11/make-applications-autostart-only-in.html

  Read the article

• Beginners guide to developing optimization software

  - by Florenc

  I am novice in "serious" programming i.e. applications that deal with real-life applications and software projects that go beyond school assignments. My interests include optimization, operations research, algorithms and lately i discovered how much I do like software design/development/engineering. I have already developed some simple desktop applications for some "famous" problems like TSP using heuristc approaches, a VRP solver (in progress) and so on. While developing this kind of software I actually used basic concepts taught at school such as object-orientation analysis and design. But, I found these courses rather elementary and quite boring (for my expectations). So I decided to go a little further and start developing "real" software (and this is where I realized how important and interesting software engineering/design is.) Now, here's my issue: I can not find a "study guide" for developing software of this kind. Currently, there are numerous resources out there (books, websites, tutorials) in designing and developing complex IS, web applications, smartphone apps but I can't find a book for example entitled "optimization software development". Definetly, someone could claim that "design patterns apply to software in general" but that's not my point. My point is that I could simply use my imagination for "simple" implementations, but what happens, when my imagination can not go further? In other words I'm looking for a guide/path to bridge the gap between: Mathematics-Algorithm Design-Software Engineering-Optimization-Software development

  Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >