Search Results

Search found 18775 results on 751 pages for 'old hardware'.

Page 406/751 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

• Can using higher rated battery damage device?

  - by Anwar Shah

  I am in need of a battery for my Lenovo 3000 Y410 Laptop. It's installed battery has voltage rating of 10.8v. But the shop i've consulted has only a battery of 11.1v rating. Should I buy the battery? I mean, Does using that battery can damage my laptop? An answer with some good source from hardware vendor will be very much helpful. Please do not just put your opinion. Because I do not see any difference in your opinion and my opinion. My opinion is also "It is bad". But I need some reliable source.

  Read the article

• Migrate an intermediate CA to a new root

  - by Tim Brigham

  Using the Microsoft CA is there any way to cut over to a new certificate authority from an intermediate authority? Both my systems are Microsoft CAs - I have a 2008 R2 Enterprise CA (intermediate) and an old 2003 CA (root). The 2003 box bit the dust and I don't have good backups. I still have a few months before the CRL expires; instead of having to cut over to a new intermediate authority is there a ready way to simply point this intermediate authority to a new offline CA?

  Read the article

• Recommendation for PCI SATA addon card?

  - by edmicman

  I have a couple of dead PCs from my wife's office that have working SATA HDDs. Sorry, I don't know if they're SATA I or II, just that they're SATA. Unfortunately, all my spare hardware at home is pretty old; all I have is IDE support. I was thinking I could get a PCI addon card on the cheap that would support SATA and put together a budget server of sorts to play with and be able to use those drives. So I've got a couple questions: After some searching it looks like I can get an addon card for ~20 bucks, but it looks like they're all SATA I? Would that matter? It looks like going to SATAII bumps the price up to $40-$60 or so. Are there any recommendations on a card to get?

  Read the article

• Configuring CentOS for Heavy-ish Traffic

  - by Jonathan Sampson

  New sysadmin here, managing a CentOS server. This past week has been one of the most exciting weeks of my career, and full of learning all sorts of new things. Today I have another task though, and that is to make sure our server can handle more than what our old shared-hosting was capable of. We were originally limited to 200 concurrent connections on our GoDaddy shared-hosting. Eventually we out-grew this (usually during campaigns/marketing events) and moved on to a Virtual Dedicated Server. I'm assuming the number of connections would be handled by Apache. What configurations should I be mindful of in order to allow more traffic in?

  Read the article

• Windows 7 safe mode pretends it's Windows XP?

  - by Joachim Kerschbaumer

  Just a question in between. A friend of mine brought me a laptop that does not work anymore and wanted me to check whether I can do something. She told me it's Windows 7, and startup screen and login screen look like it. However, as she gets a bluescreen on startup it is only possible to boot in safe mode where the system pretends to be Windows XP SP3. The system also may have 1 GB of RAM but the system itself states that it has 954 MB of RAM which is a value I've never seen before. Is everything corrupt from operating system to hardware, or am I just a newbie that does not know that Windows 7 pretends to be Windows XP SP3 in safe mode? Or is this laptop just the victim of an illegal, crazy copy of Windows XP sold as Windows 7? Maybe some strange Chinese stuff? I also recognized that the startup screen of Outlook Express reads "Outllok Express" (no typo) I´m kind of confused, maybe someone could put light into this ;)

  Read the article

• Rhythmbox - put a playlist on my iPod

  - by GorillaSandwich

  I have an old iPod nano and currently use iTunes in Windows to management. However, I'm trying to switch to Ubuntu. So far, iPod management is one major holdup. Besides being unable to easily manage podcasts, I also don't see a way to create a playlist and put it on my iPod. I can create a playlist on the computer in Rhythmbox, but I can't drag and drop it onto the iPod. I can create a playlist on the iPod itself, put I can't drag and drop songs from my library into it. If I right-click the songs, I can add them to playlists on the computer, but not on the iPod. How can I create a playlist of music in Rhythmbox and sync it to my iPod?

  Read the article

• Redhat 6 gui installation VS kickstart gives me different packages?

  - by jonaz

  If i do the graphical install and select basic server + aide and screen i get a system with 535 installed packages. If i look at the /root/anaconda-ks.cfg file in that freshly installed system i see: %packages @base @console-internet @core @debugging @directory-client @hardware-monitoring @java-platform @large-systems @network-file-system-client @performance @perl-runtime @security-tools @server-platform @server-policy @system-admin-tools pax python-dmidecode oddjob sgpio certmonger pam_krb5 krb5-workstation nscd pam_ldap nss-pam-ldapd perl-DBD-SQLite aide screen If i then install a NEW system using a kickstart only containing those packages i get 620 installed packages. So basicly my question is why does the system install almost 100 more packages when using kickstart compared to the GUI installation when the exact same packagegroups are selected?

  Read the article

• How to retrieve all MySQL settings?

  - by Max Kielland

  I have a configured MySQL server (MySQL 5.1.47-community) that works perfect. I installed a second server (MySQL 5.5.15-community) to see if the new version of MySQL would work with my application before upgrading. When I run the application against the new server it behaves different. When I run it against the old server (MySQL 5.1.47-community) everything works perfect. I remember that I set some parameters through the MySQL prompt to accept larger result set and some other stuff, now I can't remember what I did. So my question is: Is there a way to transfer all the MySQL settings from one server to another? Thanks.

  Read the article

• How to retrieve all MySQL settings?

  - by Max Kielland

  I have a configured MySQL server (MySQL 5.1.47-community) that works perfect. I installed a second server (MySQL 5.5.15-community) to see if the new version of MySQL would work with my application before upgrading. When I run the application against the new server it behaves different. When I run it against the old server (MySQL 5.1.47-community) everything works perfect. I remember that I set some parameters through the MySQL prompt to accept larger result set and some other stuff, now I can't remember what I did. So my question is: Is there a way to transfer all the MySQL settings from one server to another? Thanks.

  Read the article

• Are periodic full backups really necessary on an incremental backup setup?

  - by user2229980

  I intend to use an old computer I have as a remote backup server for myself and a few other people. We are all geographically separated, and the plan is to do incremental daily backups using rsync and ssh. My original idea was to make one initial full backup then never again have to deal with the overhead of doing it, and from that moment on only copy the files changed since the last backup. I've been told that this could be bad, but I fail to understand why. Since each snapshot is comprised of hard links to the unchanged files plus the original changed ones, isn't it going to be identical to a new full backup? Why would I want to make another full backup?

  Read the article

• How can I migrate websites between two identical servers?

  - by edude05

  I have two servers that have a nearly identical (software) configuration. We are upgrading the web servers to run windows server 2008 R2, one already is however the main one (that currently has sites) is on WS2008. Now, the old server is ns.mydomain.com and the new server is ns1.mydomain.com. Since dns automatically fails over to ns1.mydomain.com I'd like a way to move all the vhosts to the new server. Is there an automatic way to move / recreate all the vhosts on the new server? I have figured out how to migrate the DNS records already DNS Migration and since both servers are on the same private network migrating the website data isn't a large issue. Every site is running PHP & MySQL and the MySQL server is external so the records won't have to be moved. Thanks

  Read the article

• USB cable model for Kodak EasyShare Z740

  - by Robert Munteanu

  I've lost the original USB cable for my Kodak EasyShare Z740, and I can't figure out which model I should replace it with. I did not find the original parts, as the camera is pretty old. I did find the cable on the Kodak site, but I I've tried both mini-USB and micro-USB and neither fit. Alternatively, bonus points for pointing out a dealer in Bucharest, Romania which has the original part. N.B. I do use a card reader now, but I find it more convenient to use the cable.

  Read the article

• Computer Won't Boot After New Power Supply

  - by Haxelgem

  I recently bought a Rosewill 750-M PSU to replace an Antec Earthwatts 500. My computer worked fine before making the switch. After installing the Rosewill PSU, I attempted to boot. Fans spun up for a second, then turned off. After a second, they spun up again and stayed on. However, I had no video output. I put the old Antec PSU back in, and still had the same problem. I put another GPU in the computer, trying both PSUs, and still nothing. I switched out the monitor also, which didn't work. What should I do?

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS JBODs. In addition, how does battery-backed write cache (BBWC) play into the solution?

  Read the article

• VMWare shared folder out of sync

  - by JochenJung

  After booting the guest system, the shared folders are in sync and all works well. But as soon, as I make a change to one of the files on my host system (Windows 7), the file on the guest system (Ubuntu) looses its last characters and still has the old version. So the actual change is not synced. However the version on the guest gets truncated. If I delete the file on the host and create a new one with new content, everything is in sync again. It all started happening when I updated VMWare player 6.0.1. And its happening for my Ubuntu guests only (Redhat works fine). How can I tell VMware tools to force a sync on the shared folders? Host: Windows 7 Guest: Ubuntu 12.04.3 LTS VMWare: 6.0.1 build-1379776 VMWare-Tools: VMwareTools-9.6.1-1378637.tar.gz

  Read the article

• HPC Cluster planning workflow?

  - by Veronica

  After three days of intensive Google searching, I have not found any high-level workflow of how to build a low profile - cheap - computing cluster (we are not interested in HA yet). This is just a front-end plus a node for now. We want to start small with rockscluster, provide a web-based server for offering services, and then add nodes as our budget increases. We're small company, so we haven't enough human resources to implement it smoothly. Here are some facts about our environment: Our hardware is not constant (we will add nodes). Our workload will vary (in the order from 200Mb - 1Tb) Our software will change (scientific applications for data mining) Do you know any visual workflow, worksheet, chart, describing the general necessary steps to begin our cluster planning?

  Read the article

• Why Does My iMac Keep Setting the Screen Brightness to 'Full'?

  - by TomB

  I have a 2 week old 24" iMac running Mac OS X 10.6. It is the primary monitor with the menu bar on the top of display. I have an external monitor as well, a 19" Viewsonic LCD. The LCD is set to the left side of the iMac, rotated 90 degrees CCW and has the Dock along the far left edge. When I restart the screen brightness on the iMac reverts to Full brightness. The Viewsonic LCD retains the setting I have for it. I am using a Mini DVI to DVI cable for the external display. I even tried setting my Huey Pro to do automatic screen adjustment based on ambient lighting but the iMac still goes to stun with a reboot. I am sure it is something dumb I have overlooked.

  Read the article

• How to set up wireless access on a Cisco router

  - by Carlos

  Hi, I've set up my 877W according to the configuration listed in this forum post: IPTV over Cisco 877 (It's the working configuration at the bottom of the post) Note that I have an 877W, so it also has a wireless radio. Now, I've gotten the whole setup to work, so IPTV is working, and I can access the internet via the ethernet ports. Now I'm trying to figure out how to allow access via the dot11radio interface. I've gathered that I basically need to create a bridge group, and bridge the radio to the internet VLAN. However, when I add a bridge-group 2 command to VLAN1, it seems to take down the whole internet VLAN. (The IPTV continues to work.) This makes the router itself inaccessible (I've got a laptop, so no serial) and I end up having to reboot the router. Can anyone tell me how to a) Allow wireless access to the internet (preferably with WEP, to match my old router) b) Determine what makes the router inaccessible when I add the new bridge group c) Forward the IPTV traffic onto a machine on my internet VLAN

  Read the article

• Moving the OS X swap file to a faster drive

  - by Milky Joe

  I have a new Mac Mini that's running the latest version of Snow Leopard. The internal drive is a bit of a slouch. I'd like to move the swap file (or whatever it's called is OS X) to my faster external drive (Firewire 800, permanently connected). Is this possible? I've read that the old solutions aren't working in 10.6. My Mac has 2GB of RAM, so the swap file is used quite a bit when I'm doing intensive work (Photoshop etc).

  Read the article

• linksys wap54g default wpa wireless key?

  - by jack

  Hi I wrongly pressed the push button in linksys wap54g web administration. Then it restarted and stated that it's protected with WPA while I first configured it as WEP. So, my old key didn't work. What should I do? Plugin with wire cable to reconfigure it? - which is the only way? coz it was embedded in ceiling. I found no solutions in product manual and google. Thank you.

  Read the article

• WLAN LED randomly blinking when there is no traffic

  - by mrc

  Hi, I've got a Linksys WUSB54GC WLAN USB interface (Ralink chipset) and I'm running Debian GNU/Linux 6.0. The LED very often randomly blinks although there is no traffic in the network. I checked this with Wireshark. Sometimes, but rarely, the LED stops blinking. The issue is present in Ubuntu and Fedora too. It was not present in Debian Lenny with Linux 2.6.28. I checked an old live cd with ubuntu 8.10 with kernel 2.6.27 and it was also OK. So I guess that's an issue with Linux kernel and its wireless driver or firmware. Has anybody observed a similar thing? Does anybody know how to help this annoying blinking? Thanks.

  Read the article

• EEE PC 701/4G Surf Internal Drive: Is it really SSD?

  - by Bart Silverstrim

  I have an old EEE PC with the 4 Gig internal drive. Everything I've read keeps saying it's an SSD drive; running lshw tells me that it's an ATA disk, Silicon Motion SM. The thing seems to be rather slow, though. I know it has a 900 Mhz Celeron processor and only 512 meg of RAM, but it seems like drive access is slow even for those specs. Does anyone know if it really has an SSD drive? I thought that compared to regular hard disks SSD's were blazing fast, and this feels like and acts like it's pulling from something more akin to an internal USB memory stick.

  Read the article

• Convert video files for Maemo (Nokia N900) using ffmpeg/mencoder

  - by Vikrant Chaudhary

  I'm a newbie in video encoding so I'm looking for some expert advice. I'm looking to transcode media files with ffmpeg or mencoder (or something other) on Ubuntu for my Nokia N900 running Maemo. I'd prefer mencoder, because of ffmpeg's crazy dependencies. Video output should be AVC/H.264 (probably hardware accelerated on device). Audio output in AAC (should have preferred Vorbis but not supported natively and requires .mkv which is also not completely supported). Output video should retain the original aspect ratio. Resolution of screen is 800x480 (16:10). (Explanation of why-this-value-is-chosen would be really appreciated). Thanks.

  Read the article

• Ultra-lightweight web browser?

  - by zildjohn01

  Are there any good super-lightweight graphical web browsers out there? I'd like to be able to browse the web on an old PC, but the mainstream crop of browsers is just too heavy, and I don't want to resort to something like Lynx. There must be something decent out there that'll fit in 16 or 32MB of RAM comfortably. 100% standards compliance isn't necessary, but I'd like something that supports the most widely used parts of CSS and JavaScript. The goal is to get 98% of sites usable in a nice, graphical format.

  Read the article

• How can I rebuild the index in Thunderbird 3.0?

  - by Martin

  Hello, I have just deleted a lot of old messages (about 3,000) from my Thunderbird 3.0 profile. When I now use the new search feature (search all messages), TB still finds the deleted ones. I deleted them this way: I moved the messages to an own "archive" folder (not the built-in archive feature). Then I stopped TB and moved the archive files and folders to a different place on my file system. Then restarted TB. I archive my messages this way for years now. So, it seems that Thunderbird does not notice the deletion of my messages, thus the index is not updated. How can I tell TB to instantly rebuild the index?

  Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >