Search Results

Search found 17976 results on 720 pages for 'old versions'.

Page 406/720 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

  • Hardware compatibility on H97 chipset/hardware support

    - by user3238850
    I am aware that there is documentation about compatibility but it is way out dated. I am also aware that there is a hardware compatibility page on Ubuntu website, but that one is focused on the whole box rather than a single piece of hardware. I have some experience with Linux OS, and some experience playing Ubuntu Server in a virtual machine, but never worked on a machine that lives in the real internet. I am building a home server with an Intel H97 chipset motherboard. I have looked at several models and none of them has Linux in the supported OS category. I have the experience of installing Ubuntu Desktop 14.04 on my 4-years-old lap top, and except for some system errors on start up, there is not too much I can complain about, so I guess I should be fine. However, this time I am going to install Ubuntu Server 14.04 on a relatively new piece of hardware(I went to http://linux-drivers.org/ but found nothing really helpful). For example the ASUS motherboard has M.2 socket and Intel LAN I218V chip, the Gigabyte motherboard has two LAN chips(Intel LAN WGI217V and ATHEROS AR8161-BL3A-R). So I really want to make sure everything will work. Usually I would just trust Ubuntu and buy all hardware I need, but basing on my past experience with the Ubuntu Desktop version on my lap top, I am not so convinced. There is an easily noticeable difference: when the system is idle, the fan runs much more frequently and longer under Ubuntu. This leads to my suspicion that generally hardware will have worse support for Ubuntu, which is no surprising at all but enough for me to put this post here. And as far as I know, some Intel CPU features come with software that usually will not run under Linux. Any help, idea or thoughts would be greatly appreciated!

    Read the article

  • Efficient mapping layout in 2D side-scroller, and collisions between character and the world

    - by Jack
    I haven't touched Visual Studio for a couple months now, but I was playing a game from the '90s toady and had an epiphany: I was looking for something what i didn't need, and I wasn't using what I knew correctly. One of those realizations was collision, so let me tell you a bit about my project that I was working on. The project's graphics looks like Mario or Dangerous Dave, etc., you get the idea - old-school pixels. So anyway I remember trying to think of something else than AABB for character form, but I couldn't think of anything. Perhaps I could get a suggestion for this? Another thing is the world - I don't want it to be just linear world, I want mountains, etc.. My idea is to use triangles, and no idea yet what to do if I want just part of the cube, say 3/4 or 2/4 or whatever. Hard-coding such things seems inefficient. P.S. I am not looking at the precision level offered by Box2D. Actually I remember trying to implement it at first, but I failed as my understanding of C++ wasn't advanced enough, as it'll be mentioned below. P.P.S. I am programming in C++, and I haven't done it for a couple months now. I have no means of testing it either, as my PC is broken down, and this one can barely run games from late '90s, not to speak about a compiler or a program with inefficient resource management... I am also not an expert (obviously), I don't even know if I can consider myself an average programmer. In short, I am simply curious about my thoughts and my past experience when programming the game. I may come back to it when my PC is fixed, I'm already filling a note about these things.

    Read the article

  • Javascript: Machine Constants Applicable?

    - by DavidB2013
    I write numerical routines for students of science and engineering (although they are freely available for use by anybody else as well) and am wondering how to properly use machine constants in a JavaScript program, or if they are even applicable. For example, say I am writing a program in C++ that numerically computes the roots of the following equation: exp(-0.7x) + sin(3x) - 1.2x + 0.3546 = 0 A root-finding routine should be able to compute roots to within the machine epsilon. In C++, this value is specified by the language: DBL_EPSILON. C++ also specifies the smallest and largest values that can be held by a float or double variable. However, how does this convert to JavaScript? Since a Javascript program runs in a web browser, and I don't know what kind of computer will run the program, and JavaScript does not have corresponding predefined values for these quantities, how can I implement my own version of these constants so that my programs compute results to as much accuracy as allowed on the computer running the web browser? My first draft is to simply copy over the literal constants from C++: FLT_MIN: 1.17549435082229e-038 FLT_MAX: 3.40282346638529e+038 DBL_EPSILON: 2.2204460492503131e-16 I am also willing to write small code blocks that could compute these values for each machine on which the program is run. That way, a supercomputer might compute results to a higher accuracy than an old, low-level, PC. BUT, I don't know if such a routine would actually reach the computer, in which case, I would be wasting my time. Anybody here know how to compute and use (in Javascript) values that correspond to machine constants in a compiled language? Is it worth my time to write small programs in Javascript that compute DBL_EPSILON, FLT_MIN, FLT_MIN, etc. for use in numerical routines? Or am I better off simply assigning literal constants that come straight from C++ on a standard Windows PC?

    Read the article

  • Why isn't Java used for modern web application development?

    - by Cliff
    As a professional Java programmer, I've been trying to understand - why the hate toward Java for modern web applications? I've noticed a trend that out of modern day web startups, a relatively small percentage of them appears to be using Java (compared to Java's overall popularity). When I've asked a few about this, I've typically received a response like, "I hate Java with a passion." But no one really seems to be able to give a definitive answer. I've also heard this same web startup community refer negatively to Java developers - more or less implying that they are slow, not creative, old. As a result, I've spent time working to pick up Ruby/Rails, basically to find out what I'm missing. But I can't help thinking to myself, "I could do this much faster if I were using Java," primarily due to my relative experience levels. But also because I haven't seen anything critical "missing" from Java, preventing me from building the same application. Which brings me to my question(s): Why is Java not being used in modern web applications? Is it a weakness of the language? Is it an unfair stereotype of Java because it's been around so long (it's been unfairly associated with its older technologies, and doesn't receive recognition for its "modern" capabilities)? Is the negative stereotype of Java developers too strong? (Java is just no longer "cool") Are applications written in other languages really faster to build, easier to maintain, and do they perform better? Is Java only used by big companies who are too slow to adapt to a new language?

    Read the article

  • Continuous integration never results in build errors

    - by Jon
    Hi, I'm working with a variety of Java EE websites which use internal libraries we've developed. For each website, we only upgrade to new versions of our internal libraries as needed, and before committing we make sure that the site compiles fine. What this means is that when TeamCity does a build of one of our sites, the site compiles fine, but later when the site is updated to the latest version of internal libraries, there might be a compile error. Is there a good way to handle this? We're not using Maven yet; would using Maven mean that our websites could automatically use the latest version of internal libraries? Thanks. Clarification: What we sometimes run into is this: Project A depends on a library, and is currently using library version 1.0 Project B also depends on that library. I make changes to the library so that it is now version 1.5. Project B now uses 1.5. Project A and project B have both been built just fine by the CI server (TeamCity) Working on project A again, I update to 1.5 and discover that 1.5 has breaking changes in it. Is there a way for the CI server to discover these kinds of breaking changes?

    Read the article

  • Join Domain and Dos App

    - by Austin Lamb
    ok, So First off yes i have read all the related topics and those fixs are either out of date or dont work. i am running ubuntu 12.04 and i would like to add it to the win2008 server network, after i get that done i would like to mount the F:\ drive of the server somewhere on my linux machine where it can be identified as Drive F:\ by wine or Dosemu if i can achieve all of that i need to find out how to run a MS-Dos 16-bit Point-of-sales Graphic program in ubuntu whether that be through wine, dosemu, or dosBox. it does not matter it just has to be able to read and write to the servers F: drive, operate the dos app, and support LPt1 (i think) for printing reciepts and loading tickets. i am a decently knowledgeable windows tech, at least thats what my job description says.. but this is my first encounter with linux in a work environment, it could prove to very experience changing if i can just prove it as a practical theory and a reasonable solution, and get it to work.. the first step is to get it joined to the domain. i have likewise-open CLI and GUI versions, samba, and GADMIN-SAMBA installed in attempts to get any of them to work. any help in any area is greatly appreciated, especially with the domain joining since it is the first step and what i thought would be the easiest step..

    Read the article

  • Installing the AMD Proprietary Drivers broke my 12.10 desktop

    - by Drybones5
    I decided to download and install the AMD Legacy Catalyst driver 12.6 from AMD's website. I ran the .run file and the GUI below in the second image appeared and I install it that way. On reboot, I saw the below first image, though I managed to open Firefox by Open the pictures by right click Open As. No windows, buttons, or launcher / environment. It took some time but I figured out how to remove the driver and got back to normal on the default open source drivers I had before. Purged the old drivers and reconfigured xorg to make sure. How should I be going about installing the AMD made drivers? Is it even compatible with Ubuntu 12.10 yet? And if so would I even need it for 3D heavy applications like Team Fortress 2, or other game applications? I didn't install Ubuntu just for Steam, I've been using it on and off for a few years. Valve has mentioned that they are working on graphics drivers with NVIDA, AMD, and Intel. Nvidia released their new driver on Steam Linux beta release. Is AMD supposed to also have a new driver coming out soon? I'm using an ATi Radeon HD 4850 1GB. My entire desktop after install the proprietary drivers - http://i.stack.imgur.com/jTbQz.jpg GUI for the AMD Catalyst install - http://i.stack.imgur.com/UkYWn.png

    Read the article

  • How to get Autocad working with Wine?

    - by gabriel
    I am trying 3 years now installing Autocad,*3ds Max* and Revit architecture on Ubuntu with wine! Every year I am very optimistic 'cause I see the new wine versions already improved. So, now I am starting again in a clean Ubuntu installation to install Autocad 2013 with wine 1.4. I am not trying to have an answer only for me, but I want this community to try and finally we can achieve that! The winetricks have already net framework 4 to install which is the reason I have not already ran to the past Autocad. So, I would like to remove completely my windows 7 partition from my pc and go on a linux machine without loosing the powerfull architectural programms.I know all about Blender and staff so I just want you to help find a solution on that, because I know there is a solution! Maybe I will have to learn all the c++ or python etc. But I am sure that a solution can come with the help of all of us! Any suggestion about this problem will be very nice and helpfull.

    Read the article

  • Socket.io v.9 with Actionscript

    - by funseiki
    I'm attempting to develop an online multiplayer game using Node.js for the server and Flash to display the client. I've been reading up a bit and have found quite a few recommendations for the socket.io library. I've also found a github project which exposes code to help facilitate communication between an Actionscript 3.0 client and a server using socket.io. The project I mentioned is a bit dated and doesn't seem to have support for the latest version of socket.io, so I was wondering if leveraging this framework (socket.io, that is) would be the most ideal way to go. I have found a simple project that uses the standard 'net' module for node.js, but because there a few options available, I'm a little lost as to which one to go with. I'm currently leaning towards just using the regular 'net' module as it is already familiar to me. Since much of the client is already coded up, I'd really like to not switch over to using the HTML5 canvas just yet (but using socket.io would make a transition in the future more friendly, I think?). Any advice/direction on this matter would be much appreciated, though I do realize that there may be no one right answer. Edit: To be more specific, are there any client-side socket.io frameworks available that allow for communication between an Actionscript 3.0 client and a socket.io server and are robust enough to support current/future versions of socket.io? If not, what are the alternatives?

    Read the article

  • Bug fix for Eclipse runtime plugin

    - by Peter Benedikovic
    This blog is intended to inform about bug fix that solves this issue. Before continuing further, one important note – the linux and mac users do not need to read further because this bug appears only on Windows.  The problem was that the runtime plugin registered new runtime and server each time the Eclipse started. Users ended up with server view looking like this: I have created new runtime plugin which is now available at the update site http://download.java.net/glassfish/eclipse/indigo (or the same ending with juno for Juno users). You will still need to unistall the buggy plugin and (optionally but recommended) to remove runtimes created by this plugin. Here is the guide how to install bugfix: Uninstall buggy runtime plugin via menu Help->About Eclipse->Installation details. Remove runtimes created by old plugin – via Window->Preferences->Server->Runtime Environment. After pressing remove button you may be asked if you want to remove also the servers based on runtime being removed. Recommended is to do so. Now you can install new runtime plugin. Go to Help->Install New Software. You may ask why I haven‘t provided the update for buggy runtime which could be installed via Check for updates feature of Eclipse. It has two main reasons: The bug fix is needed only for Windows users so I didn't want to bother other users by updating working plugin. The runtime plugin has had structure that was not quite suitable for Eclipse update. This structure is now changed so future bugs (I am sure that there will be no such ;)) can be fixed by standard update. Have a good one!

    Read the article

  • How to restore Windows7 after restore ubuntu bootloader?

    - by Mateusz Rogulski
    At first I will describe my situation in a few points: I have installed Windows7, and then Ubuntu 11.04 on my machine. Then everything works fine and at start of system I have screen from linux where I can choose the system. Then I reinstall Windows7 and install Windows 8 on other partition. Then I can choose between Win7 and win8 when I start system. Then I need my Ubuntu back so I want restore my bootloader from Ubuntu. I boot Ubuntu from USB and in terminal write this commands: sudo fdisk -l Then I get: /dev/sda1 1 13 104391 de Dell Utility /dev/sda2 14 2805 22425601 5 Rozszerzona /dev/sda3 * 2805 41968 314572800 7 HPFS/NTFS /dev/sda4 41968 60802 151282688 7 HPFS/NTFS /dev/sda5 14 2445 19530752 83 Linux /dev/sda6 2445 2805 2893824 82 Linux swap / Solaris Next commands: sudo mount /dev/sda5 /mnt sudo mount --bind /dev /mnt/dev sudo mount --bind /proc /mnt/proc sudo chroot /mnt grub-install /dev/sda I get Installation finished. No error reported.. And when I start my machine I have old Ubuntu start screen to choose system. Ubuntu works well. But There are no Windows 8 option. But my primary problem is when I choose Windows 7 I have: error: no such device ... error: no such disk so I have no idea what can I do. I really need both systems to work. Any help would be appreciated.

    Read the article

  • Kubuntu 12.04 - DNS Issues

    - by AndrewJesaitis
    Starting yesterday (6/11/12), I've been having many network problems. When requesting a page in chrome, the page hangs on "Sending request" and then will eventually timeout. I'm within a VPN that has it's own DNS server. I've tried to manually set my DNS through the Network-Manager applet and by editing /etc/network/interfaces. Having no luck I unlinked the resolv.conf file and dumped the contents of my old resolv.conf into it. Again having no luck, I deactivated the dnsmasq server in /etc/NetworkManager/NetworkManager.conf by commenting out the dns=dnsmasq. $ cat NetworkManager.conf [main] plugins=ifupdown,keyfile #dns=dnsmasq no-auto-default=D0:67:E5:EA:B6:6B, [ifupdown] managed=false $ nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: tg3 State: connected Default: yes HW Address: D0:67:E5:EA:B6:6B Capabilities: Carrier Detect: yes Speed: 1000 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.254.122 Prefix: 24 (255.255.255.0) Gateway: 192.168.254.2 DNS: 192.168.254.1 What is strange is that the network will work fine for a few minutes then start to timeout. A few minutes later it will work again. I'm unable to hit internal or external sites when it is timing out. When I $dig local sites, I receive no answer. I do receive an answer from google.com. At this point, I would usually blame the DNS Server, especially since when I change to Google's DNS server things work. But, I need to use our internal DNS to hit our internal sites. Nobody else is having issues and they are all using DHCP. This group includes one user who is using 11.04. At this point, I'm at a loss for what to do, so any help would be appreciated.

    Read the article

  • SQL Azure Roadmap gets a little clearer &ndash; announcements from Tech Ed

    - by Eric Nelson
    On Monday at Tech?Ed 2010 we announced new stuff (I like new stuff) that “showcases our continued commitment to deliver value, flexibility and control of data through data cloud services to our customers”. Ok, that does sound like marketing speak (and it is) but the good news is there is some meat behind it. We have some decent new features coming and we also have some clarity on when we will be able to get our hands on those features. SQL Azure Business Edition Extends to 50 GB – June 28th SQL Azure Business Edition database is now extending from 10GB to 50GB The new 50GB database size will be available worldwide starting June 28th SQL Azure Business Edition Subscription Offer – August 1st Starting August 1st, we will have a new discounted SQL Azure promotional offer (SQL Azure Development Accelerator Core) More information is available at http://www.microsoft.com/windowsazure/offers/. Public Preview of the Data Sync Service  - CTP now Data Sync Service for SQL Azure allows for more flexible control over data by deciding which data components should be distributed across multiple datacenters in different geographic locations, based on your internal policies and business needs.  Available as a community technology preview after registering at http://www.sqlazurelabs.com SQL Server Web Manager for SQL Azure - CTP this Summer SQL Server Web Manager (SSWM) is a lightweight and easy to use database management tool for SQL Azure databases, to be offered this summer. Access 10 Support for SQL Azure – available now Yey – at last! Microsoft Office 2010 will natively support data connectivity to SQL Azure – we can now start developing those “departmental apps” with the confidence of a highly available SQL store provisioned in seconds. NB: I don’t believe we will support any previous versions of Access talking to SQL Azure. The Pre-announced Spatial Data Support to Become Live – Live now* At MIX in March we announced spatial was coming and apparently it is now here - although I need to check. Related Links UK based? Sign up at http://ukazure.ning.com SQL Azure Team Blog http://blogs.msdn.com/b/sqlazure/

    Read the article

  • CodePlex Daily Summary for Wednesday, May 28, 2014

    CodePlex Daily Summary for Wednesday, May 28, 2014Popular ReleasesToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Python extension for WinDbg: PYKD 0.3.0.6: Bug Fixed fixed : issue #13041 ( getCurrentThread raises exception) fixed : issue #13042 ( getProcessThreads raised Fatal Python Error ) fixed : issue #13043 ( getTargetProcesses raises Fatal Python Error)Yet another tool to read power production of SMA solar inverters: V2.4.5: Bugfix release See Modification History for more info.Continuous Affect Rating and Media Annotation: CARMA v2.01: Compiled as v2.01 for MCR 8.3 (R2014a) 32-bit version Program will automatically load settings from default.mat when opened When changing settings, users can choose to also edit default.mat Added extensive commenting in the source code file carma.m Added license.txt and readme.txt to the source code repositorySky Editor: Sky Editor 3.1 Beta 4: Since Last Beta -Cheats can be generated for specific games that have the same save format -Added preliminary code for supporting GBA codes. Things that need improvement: -Not everything can be translated with language support -Maybe a few minor graphical aspects -Spaces/language support for the code type ActionReplayDS Coming in a future release: -Changing Red/Blue Rescue Team's base type -Generating GBA cheats maybeMicrosoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesClosedXML - The easy way to OpenXML: ClosedXML 0.71.1: More performance improvements. It's faster and consumes less memory.Mathos Parser: 1.0.6.1 + source code: Removed the bug with comma/dot reported and fixed by Diego.Dynamics AX Build Scripts: DynamicsAXCommunity Powershell module (0.3.0): Change log(previous release was 0.2.4) 0.3.0 AxBuild (http://msdn.microsoft.com/en-us/library/dn528954.aspx) is supported and used by default. Smarter dealing with versions - e.g. listing configurations for all versions in the same time. $AxVersionPreference shouldn't be normally needed. Additional properties returned by Get-AXConfig. 0.2.5 -StartupCmd and -Wait added to Start-AXClient. Handles console output sent from AX (http://dev.goshoom.net/en/2012/05/console-output-ax/).xFunc: xFunc 2.15.6: Fidex #77QuickMon: Version 3.12: This release is mostly just to improve the UI for the Windows client. There are a few minor fixes as well. 1. Polling frequency presets fixed (slow, normal and fast) 2. Added collector call duration to history 3. History now displays time, state, duration and details in separate columns 4. Added a quick launch drop down list to main Window (only visible when mouse hover over it) 5. Removed the toolbar border. 6. Changed Windows service collector to report error only when all services from al...Kartris E-commerce: Kartris v2.6002: Minor release: Double check that Logins_GetList sproc is present, sometimes seems to get missed earlier if upgrading which can give error when viewing logins page Added CSV and TXT export option; this is not Google Products compatible, but can give a good base for creating a file for some other systems such as Amazon Fixed some minor combination and options issues to improve interface back and front Turn bitcoin and some other gateways off by default Minor CSS changes Fixed currenc...SimCityPak: SimCityPak 0.3.1.0: Main New Features: Fixed Importing of Instance Names (get rid of the Dutch translations) Added advanced editor for Decal Dictionaries Added possibility to import .PNG to generate new decals Added advanced editor for Path display entriesTiny Deduplicator: Tiny Deduplicator 1.0.1.0: Increased version number to 1.0.1.0 Moved all options to a separate 'Options' dialog window. Allows the user to specify a selection strategy which will help when dealing with large numbers of duplicate files. Available options are "None," "Keep First," and "Keep Last"SEToolbox: SEToolbox 01.031.009 Release 1: Added mirroring of ConveyorTubeCurved. Updated Ship cube rotation to rotate ship back to original location (cubes are reoriented but ship appears no different to outsider), and to rotate Grouped items. Repair now fixes the loss of Grouped controls due to changes in Space Engineers 01.030. Added export asteroids. Rejoin ships will merge grouping and conveyor systems (even though broken ships currently only maintain the Grouping on one part of the ship). Installation of this version wi...Player Framework by Microsoft: Player Framework for Windows and WP v2.0: Support for new Universal and Windows Phone 8.1 projects for both Xaml and JavaScript projects. See a detailed list of improvements, breaking changes and a general overview of version 2 ADDITIONAL DOWNLOADSSmooth Streaming Client SDK for Windows 8 Applications Smooth Streaming Client SDK for Windows 8.1 Applications Smooth Streaming Client SDK for Windows Phone 8.1 Applications Microsoft PlayReady Client SDK for Windows 8 Applications Microsoft PlayReady Client SDK for Windows 8.1 Applicat...TerraMap (Terraria World Map Viewer): TerraMap 1.0.6: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Added the ability to select multiple highlighted block types. Added a dynamic, interactive highlight opacity slider, making it easier to find highlighted tiles with dark colors (and fixed blurriness from 1.0.5 alpha). Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Fixed inst...DotNet.Highcharts: DotNet.Highcharts 4.0 with Examples: DotNet.Highcharts 4.0 Tested and adapted to the latest version of Highcharts 4.0.1 Added new chart type: Heatmap Added new type PointPlacement which represents enumeration or number for the padding of the X axis. Changed target framework from .NET Framework 4 to .NET Framework 4.5. Closed issues: 974: Add 'overflow' property to PlotOptionsColumnDataLabels class 997: Split container from JS 1006: Series/Categories with numeric names don't render DotNet.Highcharts.Samples Updated s...PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.3: Added CompressLogs option to the config file. Each Install / Uninstall creates a timestamped zip file with all MSI and PSAppDeployToolkit logs contained within Added variable expansion to all paths in the configuration file Added documentation for each of the Toolkit internal variables that can be used Changed Install-MSUpdates to continue if any errors are encountered when installing updates Implement /Force parameter on Update-GroupPolicy (ensure that any logoff message is ignored) ...WordMat: WordMat v. 1.07: A quick fix because scientific notation was broken in v. 1.06 read more at http://wordmat.blogspot.comNew Projects2111110074: Th?c hành l?p trình WindowEssence#: The essence of OOP: It's all messages, all the time.FUNIL DE VENDAS 2014: Testando novo repositórioFYRE: An FPS/MOBA game on the Cryengine 3: FYRE Is a FPS/MOBA game being developed on the CryEngine 3. We are currently looking for a team of people to help out with the development! Thank you GitThief: git thief is a test project to test interacting with CodeplexNLP.Framework.Common: Share the common nRF24L01+ Module for NETMF Gageteer 4.2: A NETMF module driver (DLL) that allows the use of a nRF24L01+ using the Gageteer version 4.2Pong: Create a Pong game with some variances.Projet AGL: Ce projet concerne le développement d'un programme mixmotSharePoint.WSPExtractor: This utility provides functionality to extract wsp-files from SharePoint (2010/2013) farm.SQL Server Change Data Capture Application: The SQLCDCApp is a GUI implementation for SQL Server Change Data Capture feature. Making it easy to CDC operations and to view and export change data.SvnThief: svn thief is a test project to test interacting with CodeplexYii Framework based Contact Center Application: Kontact é um sistema de gerenciamento de vendas, estoque e pessoal, com foco em Contact Center, programado em PHP, usando os padrões jQuery, Bootstrap e Yii Fra

    Read the article

  • Installer gets stuck with a grayed out forward button.

    - by TRiG
    I have a CD with Ubuntu 10.10 and a laptop with Ubuntu 8.10. The laptop had all sorts of crud on it, and anything I wanted to keep was backed up on an external drive, so I was happy to do a wipe and reinstall instead of an update. So after a bit of faffing about trying to work out how to get the thing to boot from the CD drive, I did that. So the screen comes up with the choice: the options are Try Ubuntu and Install Ubuntu. I choose to install and to overwrite my current installation. So far so good. I then get a progress bar labelled something like copying files (I forget the exact wording) and further options to fill in for my location, keyboard locale, username and password. On each of these screens there are forward and back buttons. On the last screen (password), the forward button is greyed out. Well, I think to myself, no doubt it will become active when that copying files progress bar completes. The progress bar never completes. It hangs. And the label changes from copying files to the chirpy ready when you are. The forward button remains greyed out. The back button is as unhelpful as you'd expect it to be. And there's nothing else to click. We have reached an impasse. I tried restarting the laptop, to test whether it actually was properly installed. It wasn't. I tried to run Ubuntu live from the CD, to test whether the disk was damaged. That wouldn't work either, but I suspect it's just because the laptop is old and has a slow disk drive. I'm typing this question on another computer using the Ubuntu live CD and it's working fine. So there's nothing wrong with the CD.

    Read the article

  • Should I start making connections even if I'm not ready for a job yet?

    - by James
    The first job is always the hardest to get and I'm not exception. I'm 23 years old and I have no college degree but planned on going to college this year if all goes well (CS of course). I'm self-studying java right now. I know most of the topics related to the language besides the more advanced topics and I'm beginning to look at open source projects. I would like to find a job (at least a part time job) after a year or two when I'll gain more experience and learn more about java technologies and other technologies that interest me. Finding a job will be a bit difficult because most of the people (or a lot of them at least) at my current age already have 2 years or more of experience, so I will be somewhat disadvantaged. Should I start building connections and joining websites such as linkedin ? I never bothered to look into it because I'm not much of a social network person. If I start contributing to open source projects and create personal projects for 2 years could I apply for jobs that require 1-2 years of experience? Does this experience count ?

    Read the article

  • Google authorship verification issue

    - by Fraser
    I'm trying to get my blog content author verified so my face gets into the Google search results. I managed to achieve this a few weeks back - When testing my content in the Google authorship testing tool it reported that I had been verified and I could see my mug in the results. All I had to do was wait a couple of weeks before I started popping up in the search results (I think(?)). However, I seem to have thrown a spanner in the works. I set up Google apps for my domain and merged my old Google+ profile into my google apps account. This seemed to reset my Google+ profile (no biggy, since it was a new profile and only had 1 connection). I re-set up my G+ account and tied it all in to my blog and it's content. I am now seeing some very strange behaviour. If you take a look at one of my blog posts through the snippet testing tool: http://www.google.com/webmasters/tools/richsnippets?url=http%3A%2F%2Fblog.fraser-hart.co.uk%2Fjquery-fullscreen-background-slideshow%2F&html= You will see that it is not recognising me as an author. However, when you enter my profile URL (https://plus.google.com/108765138229426105004) into the "Authorship verification by email" input, you will see that it does in fact recognise it as verified. Now, if you try and verify the same page again, it reverts back to unverified. I thought I may have to just wait it out but this has been over a week now and previously (before I merged my profile) it happened instantaneously. Has anyone experienced this bizarre behaviour before? What is happening here? More importantly, is there anything I can do to resolve it? (Apologies for the long and boring question). Cheers!

    Read the article

  • PostgreSQL, Ubuntu, NetBeans IDE (Part 3)

    - by Geertjan
    To complete the picture, let's use the traditional (that is, old) Hibernate mechanism, i.e., via XML files, rather than via the annotations shown yesterday. It's definitely trickier, with many more places where typos can occur, but that's why it's the old mechanism. I do not recommend this approach. I recommend the approach shown yesterday. The other players in this scenario include PostgreSQL, as outlined in the previous blog entries in this series. Here's the structure of the module, replacing the code shown yesterday: Here's the Employee class, notice that it has no annotations: import java.io.Serializable; import java.util.Date; public class Employees implements Serializable {         private int employeeId;     private String firstName;     private String lastName;     private Date dateOfBirth;     private String phoneNumber;     private String junk;     public int getEmployeeId() {         return employeeId;     }     public void setEmployeeId(int employeeId) {         this.employeeId = employeeId;     }     public String getFirstName() {         return firstName;     }     public void setFirstName(String firstName) {         this.firstName = firstName;     }     public String getLastName() {         return lastName;     }     public void setLastName(String lastName) {         this.lastName = lastName;     }     public Date getDateOfBirth() {         return dateOfBirth;     }     public void setDateOfBirth(Date dateOfBirth) {         this.dateOfBirth = dateOfBirth;     }     public String getPhoneNumber() {         return phoneNumber;     }     public void setPhoneNumber(String phoneNumber) {         this.phoneNumber = phoneNumber;     }     public String getJunk() {         return junk;     }     public void setJunk(String junk) {         this.junk = junk;     } } And here's the Hibernate configuration file: <?xml version="1.0"?> <!DOCTYPE hibernate-configuration PUBLIC       "-//Hibernate/Hibernate Configuration DTD 3.0//EN"     "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd"> <hibernate-configuration>     <session-factory>         <property name="hibernate.connection.driver_class">org.postgresql.Driver</property>         <property name="hibernate.connection.url">jdbc:postgresql://localhost:5432/smithdb</property>         <property name="hibernate.connection.username">smith</property>         <property name="hibernate.connection.password">smith</property>         <property name="hibernate.connection.pool_size">1</property>         <property name="hibernate.default_schema">public"</property>         <property name="hibernate.transaction.factory_class">org.hibernate.transaction.JDBCTransactionFactory</property>         <property name="hibernate.current_session_context_class">thread</property>         <property name="hibernate.dialect">org.hibernate.dialect.PostgreSQLDialect</property>         <property name="hibernate.show_sql">true</property>         <mapping resource="org/db/viewer/employees.hbm.xml"/>     </session-factory> </hibernate-configuration> Next, the Hibernate mapping file: <?xml version="1.0"?> <!DOCTYPE hibernate-mapping PUBLIC       "-//Hibernate/Hibernate Mapping DTD 3.0//EN"       "http://hibernate.sourceforge.net/hibernate-mapping-3.0.dtd"> <hibernate-mapping>     <class name="org.db.viewer.Employees"            table="employees"            schema="public"            catalog="smithdb">         <id name="employeeId" column="employee_id" type="int">             <generator class="increment"/>         </id>         <property name="firstName" column="first_name" type="string" />         <property name="lastName" column="last_name" type="string" />         <property name="dateOfBirth" column="date_of_birth" type="date" />         <property name="phoneNumber" column="phone_number" type="string" />         <property name="junk" column="junk" type="string" />             </class>     </hibernate-mapping> Then, the HibernateUtil file, for providing access to the Hibernate SessionFactory: import java.net.URL; import org.hibernate.cfg.AnnotationConfiguration; import org.hibernate.SessionFactory; public class HibernateUtil {     private static final SessionFactory sessionFactory;         static {         try {             // Create the SessionFactory from standard (hibernate.cfg.xml)             // config file.             String res = "org/db/viewer/employees.cfg.xml";             URL myURL = Thread.currentThread().getContextClassLoader().getResource(res);             sessionFactory = new AnnotationConfiguration().configure(myURL).buildSessionFactory();         } catch (Throwable ex) {             // Log the exception.             System.err.println("Initial SessionFactory creation failed." + ex);             throw new ExceptionInInitializerError(ex);         }     }         public static SessionFactory getSessionFactory() {         return sessionFactory;     }     } Finally, the "createKeys" in the ChildFactory: @Override protected boolean createKeys(List list) {     Session session = HibernateUtil.getSessionFactory().getCurrentSession();     Transaction transac = null;     try {         transac = session.beginTransaction();         Query query = session.createQuery("from Employees");         list.addAll(query.list());     } catch (HibernateException he) {         Exceptions.printStackTrace(he);         if (transac != null){             transac.rollback();         }     } finally {         session.close();     }     return true; } Note that Constantine Drabo has a similar article here. Run the application and the result should be the same as yesterday.

    Read the article

  • my LaCie 500 Gb not mounted on 11.10

    - by pooo
    My external USB drive was recognized with 10.x versions of Ubuntu but since 11.x I am getting stuck, I had tried everything I read in forums but still the same error: 4956.401052] usb 2-1.4: new high speed USB device number 14 using ehci_hcd [ 4956.539216] scsi14 : uas [ 4956.740955] scsi 14:0:0:0: Direct-Access LaCie Rugged FW USB3 1081 PQ: 0 ANSI: 4 [ 4963.256055] scsi 14:0:0:0: uas_eh_abort_handler tag 0 [ 4963.256076] scsi 14:0:0:0: uas_eh_device_reset_handler tag 0 [ 4963.256085] scsi 14:0:0:0: uas_eh_target_reset_handler tag 0 [ 4963.256091] scsi 14:0:0:0: uas_eh_bus_reset_handler tag 0 [ 4963.328122] usb 2-1.4: reset high speed USB device number 14 using ehci_hcd [ 4963.468743] scsi 14:0:0:0: Device offlined - not ready after error recovery [ 4963.468813] scsi 14:0:0:0: rejecting I/O to offline device [ 4963.468831] scsi 14:0:0:0: rejecting I/O to offline device [ 4963.469204] scsi 14:0:0:1: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [ 4963.512104] sd 14:0:0:0: Attached scsi generic sg3 type 0 [ 4994.253779] sd 14:0:0:0: uas_eh_abort_handler tag 0 [ 4994.253802] sd 14:0:0:0: uas_eh_device_reset_handler tag 0 [ 4994.253809] sd 14:0:0:0: uas_eh_target_reset_handler tag 0 [ 4994.253815] sd 14:0:0:0: uas_eh_bus_reset_handler tag 0 [ 4994.325880] usb 2-1.4: reset high speed USB device number 14 using ehci_hcd [ 4994.466488] sd 14:0:0:0: Device offlined - not ready after error recovery [ 4994.466555] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466573] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466582] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466588] sd 14:0:0:0: [sdc] READ CAPACITY failed [ 4994.466593] sd 14:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 4994.466600] sd 14:0:0:0: [sdc] Sense not available. [ 4994.466608] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466616] sd 14:0:0:0: [sdc] Write Protect is off [ 4994.466622] sd 14:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 4994.466629] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466635] sd 14:0:0:0: [sdc] Asking for cache data failed [ 4994.466640] sd 14:0:0:0: [sdc] Assuming drive cache: write through [ 4994.467003] sd 14:0:0:0: [sdc] Attached SCSI disk if I am trying on an old ubuntu, the drive is mounted,

    Read the article

  • CodePlex Daily Summary for Wednesday, December 12, 2012

    CodePlex Daily Summary for Wednesday, December 12, 2012Popular ReleasesTorrents-List Organizer: Torrents-list organizer v 0.5.0.3: ????????? ? 0.5.0.3: 1) ?????????? ??????? ??? ?????????? ???-??????? ? ???????-??????. 2) ? ??????? ?????? ??????????? ?????????????? ????? ?????????? ?????????: ???? ?? ??????-???? ?????????? ?? ????????? ?? ????? ???????, ?? ? ????? ????? ????????? ????? ????????? ?? ????, ? ????????? ??? ???? ?????? ??????????.Fiskalizacija za developere: FiskalizacijaDev 2.0: Prva prava produkcijska verzija - Zakon je tu, ova je verzija uskladena sa trenutno važecom Tehnickom specifikacijom (v1.2. od 04.12.2012.) i spremna je za produkcijsko korištenje. Verzije iza ove ce ovisiti o naknadnim izmjenama Zakona i/ili Tehnicke specifikacije, odnosno, o eventualnim greškama u radu/zahtjevima community-a za novim feature-ima. Novosti u v2.0 su: - That assembly does not allow partially trusted callers (http://fiskalizacija.codeplex.com/workitem/699) - scheme IznosType...Simple Injector: Simple Injector v1.6.1: This patch release fixes a bug in the integration libraries that disallowed the application to start when .NET 4.5 was not installed on the machine (but only .NET 4.0). The following packages are affected: SimpleInjector.Integration.Web.dll SimpleInjector.Integration.Web.Mvc.dll SimpleInjector.Integration.Wcf.dll SimpleInjector.Extensions.LifetimeScoping.dllBootstrap Helpers: Version 1: First releasesheetengine - Isometric HTML5 JavaScript Display Engine: sheetengine v1.2.0: Main featuresOptimizations for intersectionsThe main purpose of this release was to further optimize rendering performance by skipping object intersections with other sheets. From now by default an object's sheets will only intersect its own sheets and never other static or dynamic sheets. This is the usual scenario since objects will never bump into other sheets when using collision detection. DocumentationMany of you have been asking for proper documentation, so here it goes. Check out the...MySqlBackup.NET - MySQL Backup Solution for C#, VB.NET, ASP.NET: MySqlBackup.NET 1.5.5 beta: Fix Bug: max_allowed_packet is modified to 1GB, but does not take effect in import & export process. This bug is fixed by re-initialize the MySqlConnection. Modified max_allowed_packet will only take effect on new connection, not on current connection.DirectX Tool Kit: December 11, 2012: December 11, 2012 Ex versions of DDSTextureLoader and WICTextureLoader Removed use of ATL's CComPtr in favor of WRL's ComPtr for all platforms to support VS Express editions Updated VS 2010 project for official 'property sheet' integration for Windows 8.0 SDK Minor fix to CommonStates for Feature Level 9.1 Tweaked AlphaTestEffect.cpp to work around ARM NEON compiler codegen bug Added dxguid.lib as a default library for Debug builds to resolve GUID link issuesDirectXTex texture processing library: December 2012: December 11, 2012 Ex versions of CreateTexture, CreateShaderResourceView, DDSTextureLoader and WICTextureLoader Fixed BC2 and BC3 decompression issue for unusual color encoding case Converted annotation to SAL2 for improved VS 2012 /analyze experience Updated DirectXTex, DDSView, and Texconv with VS 2010 + Windows 8.0 SDK project using official 'property sheets'ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.1 Final for 10.1: We are proud to announce the release of ArcGIS Editor for OpenStreetMap version 2.1. This download is compatible with ArcGIS 10.1, and includes setups for the Desktop Component, Desktop Component when 64 bit Background Geoprocessing is installed, and the Server Component. Important: if you already have ArcGIS Editor for OSM installed but want to install this new version, you will need to uninstall your previous version and then install this one. This release includes support for the ArcGIS 1...Ad Rotator for Windows & Windows Phone: AdRotator v1.3 Silverlight: Note now also available via NuGet for both WP7 and WP8 v 1.3 Changelog: *Updated Ad Providers to Latest releases, inc: - Inneractive (new Nokia release) - Updated WP Smaato - MS Ad SDK Changed Caching strategy to always grab from network unless unavailable Pubcenter (Suspend/Resume) feature added Pubcenter "Active" fix option Cleaned up some threaded calls Other minor fixes For usage details check out the following tutorial blog post - http://bit.ly/S5CD4T *Note Included bin...SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8.2: This release just contains some fixes that have been done since the last release. Plus, this is strong named as well. I apologize for the lack of updates but my free time is less these days.Media Companion: MediaCompanion3.511b release: Two more bug fixes: - General Preferences were not getting restored - Fanart and poster image files were being locked, preventing changes to themVodigi Open Source Interactive Digital Signage: Vodigi Release 5.5: The following enhancements and fixes are included in Vodigi 5.5. Vodigi Administrator - Manage Music Files - Add Music Files to Image Slide Shows - Manage System Messages - Display System Messages to Users During Login - Ported to Visual Studio 2012 and MVC 4 - Added New Vodigi Administrator User Guide Vodigi Player - Improved Login/Schedule Startup Procedure - Startup Using Last Known Schedule when Disconnected on Startup - Improved Check for Schedule Changes - Now Every 15 Minutes - Pla...Secretary Tool: Secretary Tool v1.1.0: I'm still considering this version a beta version because, while it seems to work well for me, I haven't received any feedback and I certainly don't want anyone relying solely on this tool for calculations and such until its correct functioning is verified by someone. This version includes several bug fixes, including a rather major one with Emergency Contact Information not saving. Also, reporting is completed. There may be some tweaking to the reporting engine, but it is good enough to rel...VidCoder: 1.4.10 Beta: Added progress percent to the title bar/task bar icon. Added MPLS information to Blu-ray titles. Fixed the following display issues in Windows 8: Uncentered text in textbox controls Disabled controls not having gray text making them hard to identify as disabled Drop-down menus having hard-to distinguish white on light-blue text Added more logging to proxy disconnect issues and increased timeout on initial call to help prevent timeouts. Fixed encoding window showing the built-in pre...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.400: Version 2.5.0.400 (Release): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Update the documentation. InfoMan: Write the documentation. Other Downloads Downloads OverviewHome Access Plus+: v8.5: v8.5.1211.1240 Fixed: changed to using the thumbnailPhoto attribute instead of jpegPhoto v8.5.1208.1500 This is a point release, for the other parts of HAP+ see the v8.3 release. Fixed: #me#me issue with the Edit Profile Link Updated: 8.5.1208 release Updated: Documentation with hidden booking system feature Added: Room Drop Down to the Booking System (no control panel interface), can be Resource Specific Fixed: Recursive AD Group Membership Lookup Fixed: User.IsInRole with recursive lookup...Http Explorer: httpExplorer-1.1: httpExplorer now has the ability to connect to http server via web proxies. The proxy may be explicitly specified by hostname or IP address. Or it may be specified via the Internet Options settings of Windows. You may also specify credentials to pass to the proxy if the proxy requires them. These credentials may be NTLM or basic authentication (clear text username and password).Bee OPOA Platform: Bee OPOA Demo V1.0.001: Initial version.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.78: Fix for issue #18924 - using -pretty option left in ///#DEBUG blocks. Fix for issue #18980 - bad += optimization caused bug in resulting code. Optimization has been removed pending further review.New ProjectsBattle of Colors: Vacation project. Summary.blockme: This is a Blog using C#, ASP.Net MVC3 & RazorCoevery for Windows Phone: Coevery for Windows Phone is a free CRM Windows Phone application developed by Nova Software which is a .NET focused software development company.DNN Flash Viewer: Simple module for displaying flash content within a DNN pane.DonablRow Line Follower Simulator: This Application helps you to find the best Algorithm for your line follower robot.ExcelMerge: Merge microsoft excel file to a single.FCMGAAI: project ini merupakan implementasi algoritma fuzzy Cmeans dengan optimasi algoritma genetikaLIRC#: LIRC# is a simple client library to allow a .NET application to interact with an LIRC server to control or be controlled by IR devices.Managed Media Aggregation: Allowing developers to aggregate media from Rtsp sources over Rtsp without degrading the source bandwidth. Agnostic of Video or Audio format. Decodes Jpeg / RTPMarket Data Server: Local database server with quotes and trade-related data associated with equity, fixed-income, financial derivatives, currency, and other investment instrumentsproject13251212: papproject13271212: paPutovanje: Android aplikacija napisana za Mtel android ligu 2Questionario dinâmico: Questionario dinâmico para fins de estudos.Rasoulian: my RepoSharepoint Blog Archive Web Part: This Web Part is an alternative of the standart SharePoint Blog Site Archives Web Part. It's based on SharePoint 2010 Blog Site Archives Web Part by Bandar AlSimpleSocket for Windows Phone: SimpleSocket for Windows Phone is a super simple to use wrap around the built in socket framework that makes using socket connections incredibly easy and fast.

    Read the article

  • How do I get OBDII software working?

    - by NoBugs
    I have an ODBII USB cable for vehicle diagnostics, unfortunately I haven't been able to get it working on Ubuntu 12.04. The closest I've come is using the VAG-COM software with wine, using the ln -s /dev/ttyUSB0 ~/.wine/dosdevices/com1 trick and running stty -F /dev/ttyUSB0 speed 9600 repeatedly. It will connect and show the vehicle is OBDII, but none of the useful features seem to be working. I tried: Scantool - says it's connecting to the /dev/device in terminal, but doesn't. obdgpslogger - times out all the time. pyobd - This seems to be the most up-to-date source I could find, I had to adjust the code a bit to work (see here for changes). Still, in obd_io.py interpret_result function, it says it's looking for 4 space separated numbers, where the usb-serial is receiving bogus code "0100" instead? The device shows up in lsusb as: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Is the problem that these native tools don't expect a USB serial, or a serial of this type? Or are these apps too old to recognize OBD2 of this vehicle?

    Read the article

  • Debugging Windows Service Timeout Error 1053

    - by Joe Mayo
    If you ever receive an Error 1053 for a timeout when starting a Windows Service you've written, the underlying problem might not have anything to do with a timeout.  Here's the error so you can compare it to what you're seeing: --------------------------- Services --------------------------- Windows could not start the Service1 service on Local Computer.   Error 1053: The service did not respond to the start or control request in a timely fashion. --------------------------- OK   --------------------------- Searching the Web for a solution to this error in your Windows Service will result in a lot of wasted time and advice that won't help.  Sometimes you might get lucky if your problem is exactly the same as someone else's, but this isn't always the case.  One of the solutions you'll see has to do with a known error on Windows Server 2003 that's fixed by a patch to the .NET Framework 1.1, which won't work.  As I write this blog post, I'm using the .NET Framework 4.0, which is a tad bit past that timeframe. Most likely, the basic problem is that your service is throwing an exception that you aren't handling.  To debug this, wrap your service initialization code in a try/catch block and log the exception, as shown below: using System; using System.Diagnostics; using System.ServiceProcess; namespace WindowsService { static class Program { static void Main() { try { ServiceBase[] ServicesToRun; ServicesToRun = new ServiceBase[] { new Service1() }; ServiceBase.Run(ServicesToRun); } catch (Exception ex) { EventLog.WriteEntry("Application", ex.ToString(), EventLogEntryType.Error); } } } } After you uninstall the old service, redeploy the service with modifications, and receive the same error message as above; look in the Event Viewer/Application logs.  You'll see what the real problem is, which is the underlying reason for the timeout. Joe

    Read the article

  • How can I install Celtx 2.9.7 properly on Ubuntu 12.04 LTS?

    - by cruxfilm
    I am new to Ubuntu and Linux and I want to install and use the newest version of the screenwriting software Celtx on Ubuntu 12.04 LTS. After trying https://answers.launchpad.net/ubuntu/+source/ubiquity/+question/206295 and using sudo add-apt-repository ppa:dreamstudio/video sudo apt-get update sudo apt-get install celtx I unfortunately had to find out that was a rather old version with a fairly screwed up UI. I then downloaded the newest version from http://download.celtx.com/2.9.7/Celtx-2.9.7-64.tar.bz2 but now I don't know how to properly install it. I extracted it to /home/username/ (there was no ~/bin/) as described here and I can now launch the application by running the file celtx within that folder (I get asked whether I want to Display, run or run it in Terminal) and it works fine. But I can't get it to launch from Unity. I tried right-clicking the launcher button and going "Lock to Launcher" while it's running and it does create an icon but clicking it to launch the program does nothing. Also searching for celtx in the Dash doesn't find the app. And advice on how to properly install Celtx 2.9.7 in Ubuntu 12.04 LTS?

    Read the article

  • Cross-Platform Migration using Heterogeneous Data Guard

    - by Roy F. Swonger
    Most people think of Data Guard as a disaster recovery solution, and it certainly excels in that role. However, did you know that you can also use Data Guard for platform migration under some conditions? While you would normally have your primary and standby Data Guard systems running on the same OS and hardware platform, there are some heterogeneous combinations of primary and stanby system that are supported by Data Guard Physical Standby. One example of heterogenous Data Guard support is the ability to go between Linux and Windows on many processor architectures. Another is the support for environments that are running HP-UX on both PA-RIsC and Itanium hardware. Brand new in 11.2.0.2 is the ability to have both SPARC Solaris and IBM AIX on Power Systems in the same Data Guard environment. See My Oracle Support note 413484.1 for all the details about supported platform combinations. So, why mention this in an upgrade blog? Simple: much of the time required for a platform migration is usually spent copying files from one system to another. If you are moving between systems that are supported by heterogenous Data Guard, then you can reduce that migration downtime to a matter of minutes. This can be a big win when downtime is at a premium (and isn't downtime always at a premium? In addition, you get the benefit of being able to keep the old and new environments synchronized until you are sure the migration is successful! A great case study of using Data Guard for a technology refresh is located on this OTN page. The case study showing CERN's methodology isn't highlighted as a link on the overview page, but it is clickable. As always, make sure you are fully versed on the details and restrictions by reading the available documentation and MOS notes. Happy migrating!

    Read the article

  • How do I use depth testing and texture transparency together in my 2.5D world?

    - by nbolton
    Note: I've already found an answer (which I will post after this question) - I was just wondering if I was doing it right, or if there is a better way. I'm making a "2.5D" isometric game using OpenGL ES (JOGL). By "2.5D", I mean that the world is 3D, but it is rendered using 2D isometric tiles. The original problem I had to solve was that my textures had to be rendered in order (from back to front), so that the tiles overlapped properly to create the proper effect. After some reading, I quickly realised that this is the "old hat" 2D approach. This became difficult to do efficiently, since the 3D world can be modified by the player (so stuff can appear anywhere in 3D space) - so it seemed logical that I take advantage of the depth buffer. This meant that I didn't have to worry about rendering stuff in the correct order. However, I faced a problem. If you use GL_DEPTH_TEST and GL_BLEND together, it creates an effect where objects are blended with the background before they are "sorted" by z order (meaning that you get a weird kind of overlap where the transparency should be). Here's some pseudo code that should illustrate the problem (incidentally, I'm using libgdx for Android). create() { // ... // some other code here // ... Gdx.gl.glEnable(GL10.GL_DEPTH_TEST); Gdx.gl.glEnable(GL10.GL_BLEND); } render() { Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); Gdx.gl.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA); // ... // bind texture and create vertices // ... } So the question is: How do I solve the transparency overlap problem?

    Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >