Search Results

Search found 17870 results on 715 pages for 'screen resolution'.

Page 406/715 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

• Installing linux on OCZ RevoDrive3 x2

  - by user2101712

  First of all, here is the configuration of my computer: Motherboard: Asus H87Plus RAM: Corsair Vengeance 32GB Processor: Intel i7 4770 Drive: OCZ RevoDrive 3 x2 (240 GB) (OCZ Revodrive3 is a PCIe module) I am trying to install the latest version of Ubuntu Desktop (13.10). The problem is that in the UEFI (bios) the drive shows up as a 240 GB drive, but in the Ubuntu installer it shows up as two 120 GB drives. If I install Ubuntu in any of these two drives, it never boots. The screen flickers a few times and comes back to the UEFI menu. I have tried reading up and have come across information that the drive has a "fakeraid", and the solution is to use dmraid. However, when I give the following commands in the terminal (from live CD): # modprobe dm_mod # dmraid -ay it says: no raid disks. And the following command: # ls -la /dev/mapper/ just shows /dev/mapper/control How can I install Ubuntu on my computer? what is the correct method?

  Read the article

• Installing Debian 7.1 on FakeRAID/Intel Z77 results in boot with no grub menu

  - by user198982

  I'm trying to install Debian 7.1 from DVD onto 2x500GB drives which are set up in a FakeRAID mirror using the on-board FakeRAID provided by the Z77 chipset. I have followed the guide here https://wiki.debian.org/DebianInstaller/SataRaid. Namely, I booted into the expert install with the 'dmraid=true' option added, installed onto the RAID mirror which the installer correctly detected, then installed grub2 onto /dev/mapper/.. raid volume. I chose to use LVM (so a boot partition + LVM volume). As per the guide, I have uncommented the "GRUB_DISABLE_LINUX_UUID=true" line in "/etc/default/grub" and ran "update-grub" then "grub-install /dev/mapper/.." (with the right RAID device in the command). However, after I rebooted the system, all I got was a grub console. It did not load the menu. I checked and it seems that it never even generated a menu file. I re-installed Debian a few times since, trying out different options and also a few workarounds people posted online, but to no avail. The best I am getting is a grub console. No menu. Some times it will generate the grub.cfg, some times it won't, depending on the workaround I try. I was wondering if anyone else has experienced this issue. There is no need to preach how I should not use FakeRAID. I have seen others trying to figure this out so I think a resolution to this issue would be of interest to more than just me. Also, I first installed the system onto a small drive for testing something else. I made a backup with Acronis and was able to restore that onto the RAID mirror by using Universal Restore. When I installed it onto a 500GB without RAID, backed up using the same method, then restored onto a RAID volume of the same size, it would not boot and I got grub errors. Weird. I can post more details, just let me know what you want to see.

  Read the article

• Codecs, Premiere Pro & Quicktime: Import or Play Error

  - by Nchpmn

  Original Question I've been using a FS-H200 (not the Pro variant) recorder with a JVC ProHD camera. I have been shooting with the DTE FORMAT to Quicktime (.mov). I copied the files to an external hard drive and am now trying to edit. The files will play back in VLC, as they would be expected to. However they will not import into Adobe Premiere CS5.5, instead giving an error: Unsupported format or damaged file. Quicktime gives the following error when attempting to play the files: Error -2002: a bad public movie atom was found in the movie (Filename) To try and fix this, I have installed the following codec packs: K-Lite Codec Pack 64-bit Full (version 5.9, latest) K-Lite Codec Pack 32-bit Full (version 8.4, latest) MainConcept Codec Suite (Broadcast) v5.1 for Adobe CS5 Reinstalled Quicktime with new download from Apple The same errors and problems still exist. From this I can assume that there is an issue with Quicktime and that is what Premiere is using as an encoder/decoder for the codec. Is there any way to fix this? From looking at the "Codec Information" from VLC: Stream 0 Type: Video Codec: MPEG-1/2 (mpgv) Language: English Resolution: 1280 x 720 Frame Rate: 25 Stream 1 Type: Audio Codec: PCM S16 BE (twos) Language: English Channels: Stereo Sample Rate: 48000 Hz Bits per sample: 16 Other computer specs: Windows 7 Professional 64-bit (SP1) Gigabyte Z68X-UD3-B3 Intel i7-2600K 16GB DDR3 2TB WD 7200RPM SATA 6Gb/s LaCie d2 Quadra 2TB v3 7200RPM (External HDD) NVIDIA GeForce GTX 560 Ti Golden Sample Updates 2012-03-11 @ 2050 AEDT MPEG Steamclip doesn't recognise, play or convert the footage. File open error: unrecognised file type. [Open Anyway] File open error: can't find video or audio tracks. 2012-03-24 @ 1920 AEDT Had to transcode the footage. :(

  Read the article

• Gaming with ATI open-source drivers

  - by user7174

  I have recently bought humble bundle 2 ( http://www.humblebundle.com/ ). Is there a way to run Braid using ATI's open-source drivers? The game always crashes. When do get it to start in windowed mode once i go to the first level it will crash. I am using the lastest version of Braid (ST3C ignored) When I use the proprietary drivers Braid works flawlessly and World of Goo performance is increased. However there is terrible screen tearing with the ATI propritary drivers. So my question is: How do I play Braid if I want to use the proprietary drivers?

  Read the article

• Xubuntu all Icons disappeared

  - by user1392185

  I'm running Xubuntu 12.04.1 with kernel Xen4.1-amd64 and the following problem is mine: Nearly all icons have been replaced by the default "no icon available"-icon, even on the login screen and the all icons in software like e.g. Firefox and the icons I manually assigned to launchers, too. Changing the icon theme does not seem to affect this. The only icons that did not disappear are: LibreOffice, gThumb, Simplescan, Ristretto and in the XFCE menu office, tools and graphics. How could I bring the icons back? EDIT: When I tried to use Ristretto the following error showed up: Could not load image-loader module /usr/lib/x68_64-linux-gnu/gdk-pixbuf-2.0/2.12.0/loaders/libpixbufloader-png.so Unable to open shared-object-file I/O error (Had to translate this to English.)

  Read the article

• How do you dual boot Windows 7/8 seperatly with GRUB?

  - by Aaron

  I installed the beta version of Windows 8 and re-installed GRUB. When I boot my computer and select Windows 7, I get the new Windows 8 booting screen asking to boot between either Windows 7 or 8. If I choose Windows 7, my computer then restarts and I have to select Windows 7 again in order to boot into 7. But if I choose Windows 8 it boots right up. I understand I can choose which OS to boot by default, but I want my GRUB options to be the only way to choose between OS's. So my question is, how can I set this up so that when I click on Windows 7, I go there, and when I select Windows 8, I boot 8?

  Read the article

• A real noob question

  - by Jaymz

  I have a Hp mini netbook that has been wiped clean, there is nothing other than the bios on it, it has no DVD and I don't have an external DVD. I can change the boot order to boot from a usb device. I have downloaded ubuntu-12.04.1-desktop-i386 I have one of these http://www.kikatek.com/P100600/34609-IOMEGA-250gb-Select-Portable-HDD-2-5-USB?source=froogle currently formatted to NTFS but I can format to exFAT I have tried Linuxlive USB creator, all that managed to do was dual boot the desktop pc that I'm working off, and when booting on the wiped clean netbook, just left me with a black screen with a blinking cursor I have also tried Unetbootin, this managed to change my 'My Computer' icon to Install Ubuntu (C:) and now again, my desktop pc dual boots with the Wubi software, the Unetbootin, wouldn't let me select my external drive to write to Please I'm a complete idiot, i need a super idiots guide to doing this Regards Jaymz

  Read the article

• How do I start the GUI (Window Manager?) over VNC?

  - by Maarx

  I have a netbook and a server, to both of which I installed the identical Ubuntu 10.04 LTS distribution. On the server, I had the foresight to install and enable the SSH server before disconnecting the monitor and keyboard and mouse. I then ssh'ed in and enabled the VNC server as well. Now I want the full server experience on the netbook, but when I VNC in, I am greeted with the displayed screen. (names have been redacted) How do I start the rest of the default Ubuntu GUI experience? (the toolbars at the top) ((is that the window manager?))

  Read the article

• Failure to start grub with Wubi

  - by Marco Ceppi

  My laptop battery ran down and died while using Ubuntu 10.04 with Wubi. Upon recharge (and restart) selecting Ubuntu from the Windows Boot menu brings me to the typical prompt which says (and I paraphrase): Trying hd(0,0) on Disk... After that the screen flickers to white (for a split second) then black. No grub menu comes up (as I would expect) no cursor, no grub sh prompt. Nothing. I've tried switching TTYs to no avail. As there are no logs, I can't trouble shoot anything. I've run a check disk from windows (on the NTFS partition the root.disk is stored) with no luck. What is causing this failure to load grub (and, by association Ubuntu) - How can I restore my setup and get Ubuntu via Wubi working?

  Read the article

• Newly compiled (patched with -ck) 3.3 kernel won't boot up

  - by Shiki

  Screen is garbled. Reaaaally garbled. Like some sort of scrambling image from a movie. I can upload some pictures if needed. To be short with the description. Here is my 3.3 + ck .config file: http://pastebin.com/aP2F9RcH The dmesg log of the failed kernel: http://pastebin.com/esc2Rtka The computer is a ThinkPad T500 laptop. I have selected everything needed for the computer (as far as I can tell, but check the .config). The normal generic Ubuntu kernel boots and works perfect!

  Read the article

• Ubuntu 13.10 upgrade error. Dropping to low graphics mode

  - by aero31aero

  I was updating from the terminal and it was complete. It asked me if I would like to reboot now. I accidentally pressed 't' instead of 'y' and then it just asked me to reboot manually. Then I rebooted using sudo shutdown now -r And on reboot, the system flashed the "low graphics mode" error screen and its stuck there. I have 13.10 live-USB with me. Is there any way I can get my system to boot normally? I'm not willing to do a fresh install as I had installed several other packages. Another question: is there any diff if I drop into terminal using Alt+Ctrl+F1 or if I use chroot from a live session?

  Read the article

• Installing 12.10 messed up Xorg

  - by Ghost

  So I finally decided to upgrade from 12.04 and now my ubuntu install has been rendered unusable. I'm getting the "no screens detected" error from xorg in the console, and no mattr how many times I reinstall it xorg keeps throwing the same errors. I already had to do a bunch of hacks like nomodeset just to get to the console, else I would get an infinite tabulator after the purple boot screen. The machine has a 4200HD IGP, I even tried installing fglrx legacy (4xxx series and below are not supported in regular fglrx anymore) which was a subpar driver in 12.04 but in hopes that the machine would at least work, but nope, nothing at all. Anyone had the same problem? how do I fix it? EDIT: just wanted to add that I upgraded to 13.04 and it didn't solve anything, in fact it might have broken things even further.

  Read the article

• Failed to load session "ubuntu"

  - by harsh

  I installed CCSM to enable window previews in Unity. But when I went into extras, there was no 'window preview' option. So I tried experimenting with other options in Compiz and now there are no borders in the dialogue boxes (close, minimize, restore buttons are not there, I had enabled some 'flat....' option in Compiz. Later, I uninstalled Compiz and then reinstalled it. Now it says "Failed to load session Ubuntu" I can't even access through the guest account, I am new to Ubuntu.(please explain in detail). All I have access to is the login screen (it still shows my custom wallpaper). Please help, I don't want to lose my stuff.

  Read the article

• Windows 7 doesnt boot after installing Ubuntu 12.10 (Asus Zenbook Prime / UEFI problem)

  - by jpdus

  Today I installed Ubuntu and since then i cannot boot into Windows anymore. I used the "standard" option (didnt change any partitions manually, just entered the size) but used the UEFI-mode. At first the GRUB entries for Windows did not work at all, after reading this thead i was able to add a new Grub entry - now i can get into the "windows-loading" screen for a few seconds but then i always see some kind of bluescreen for a fraction of a second and the laptop reboots. I can get into the windows recovery partition but the only option there is to reset everything to factory settings (+erase all data). I have no idea how to get into the Windows 7 repair mode which was mentioned here (tried everything else in this thread too - no success). My boot info can be found here: http://paste.ubuntu.com/1411573/ I have no idea what went wrong (there is even an extra page for the Zenbook Prime where no installation problems are mentioned). I would appreciate any help/ideas, many thanks!

  Read the article

• Publishing Websites From VS.NET 2013 to Azure

  - by D'Arcy Lussier

  Originally posted on: http://geekswithblogs.net/dlussier/archive/2013/10/24/154459.aspxScott Gu recently announced the release of the Azure SDK 2.2. This includes a tonne of new features for accessing Azure resources from within Visual Studio 2013. You can read Scott’s blog post here. One feature is integrated Windows Azure sign in from within Visual Studio. I put a short video together showing how easy it is to publish a web application to Azure Websites. You can check it out here: http://youtu.be/eiuhJbwhZsQ (I couldn’t get it to display properly by embedding, definitely needs the wide-screen 720p view for best viewing) And yes, you can access James Chambers Karaoke Fansite live on Azure! Resources: Azure SDK 2.2 https://www.windowsazure.com/en-us/develop/net/ VS.NET 2013 Express http://www.microsoft.com/visualstudio/eng/downloads#d-2013-express

  Read the article

• problem booting wubi. Panic occuerd

  - by Scott

  This is the first time I tried Ubuntu. I downloaded the Wubi so I can try it and still have the Windows XP Pro. I ran the install after that it said to rebot so I did. Then I was asked if I wanted to run windows or ubuntu I selected ubuntu. Some code flashed by it went to the ubuntu logo screen. Then some more code and it stops with the code. 73.928015 Panic occured, switching back to text console I have tried it three times and it stops in the same place and won't go any further. Anybody no wants wrong with it?

  Read the article

• Tool Review: Telerik JustDecompile

  - by Sam Abraham

  In the next few lines, I will be providing a brief review of Telerik’s JustDecompile, a free .Net decompiler and assembly browser. In using Telerik’s 2012 Q3 JustDecompile release, one can see many great features.  First off, I loved the built-in options for loading .Net assemblies automatically using the Open->Load Framework menu option. Other options enable loading assemblies from GAC, XAP URL or locally from disk. The ability to create an “Assembly List” is quiet handy for grouping and saving a “List” of DLLs to load. All loaded assemblies are shown in the left panel of a split-panel screen. Clicking an assembly expands all namespaces within. Drilling further to class level displays the actual source code in the right panel in either IL, C# or Visual Basic. In conclusion, JustDecompile has grown and quickly matured into an indispensible handy tool for us developers. Telerik’s effort in maintaining and updating JustDecompile as well as the company’s commitment to keeping it free is much appreciated and valued.

  Read the article

• Circle physics and collision using vectors

  - by Joe Hearty

  This is a problem I've been having, When making a set number of filled circles at random locations on a JPanel and applying a gravity (a negative change in the y), each of the circles collide. I want them to have collision detection and push in the opposite direction using vectors but I don't know how to apply that to my scenario could someone help? public void drawballs(Graphics g){ g.setColor (Color.white); //displays circles for(int i = 0; i<xlocationofcircles.length-1; i++){ g.fillOval( (int) xlocationofcircles[i], (int) (ylocationofcircles[i]) ,16 ,16 ); ylocationofcircles[i]+=.2; //gravity if(ylocationofcircles[i] > 550) //stops gravity at bottom of screen ylocationofcircles[i]-=.2; //Check distance between circles(i think..) float distance =(xlocationofcircles[i+1]-xlocationofcircles[i]) + (ylocationofcircles[i+1]-xlocationofcircles[i]); if( Math.sqrt(distance) <16) ...

  Read the article

• Can't decrease/increase brightness on SAMSUNG NP300V3A more than 1 step

  - by Žygis

  I just installed Oneiric on a SAMSUNG NP300V3A (Series 3) laptop. Everything seems to work fine more or less except one thing: I can't reduce screen brightness more than 10% or so. Fn+F3 (brightness up) sets brightness to 100% and Fn+F2 (brightness down) sets it to about 90% or so. No matter how many more times I press it, it doesn't fall below that. For a video card I have an integrated Intel HD Graphics 3000 chipset, but that's probably unrelated to the issue. What can I do to solve this?

  Read the article

• On-line Based Conferencing For Admin Panel

  - by Tim Marshall

  Working on my admin panels work station section which will allow the admin to use simple office tools such as word editors, calculators and whatnot. Under this section of the admin panel, I would like to add a conferencing feature which will allow any administrator to connect with another administrator 1-2-1 under the 1-2-1 Conferencing section, or to join a meeting under 'live meeting' section. Upon my search for on-line based, I found there are all these, what seem to be great applications out there, however not all of them are on-line based, and come with a price! I would like to a purely on-line based conferencing/meeting/1-2-1 feature which will allow administrators to communicate via text or sound, stream their video, share their screen and sending of files. I know this sounds like a big feature, and I am not asking for someone to answer by programming one for my website! Does anyone know my best solution to progress to having this feature on my website, any tutorials or free to use, free to modify web plugins? Thank you for your help, Best Regards, Tim

  Read the article

• Desktop background will not load after performing aticonfig --adapter=all --ovt=opengl

  - by user1571959

  I am trying to get Eagle to work on ubuntu 14.04 LTS. When I run Eagle and open a schematic the display is not refreshing/redrawing correctly. One solution that I found was to install the flgrx drivers and do the aticonfig command to use opengl... So I did and rebooted. Now when I turn on my laptop I get all the way to the login screen, login, and then nothing happens, it just goes to the background image with no icons or anything... I tried deleting and copying the original xorg.conf file and no results... What do I do other than reinstalling Ubuntu? is there anyway to force the original driver?

  Read the article

• How To Delete Your Skype Call and Chat History

  - by Gopinath

  Just like every other modern application, Skype also records all the communications we exchange using it. It records instant messages, calls, file transfers, SMS, etc. and makes it easy to view using the Conversation tab. If you ever feel like getting rid of these history information, then you need to delete them. Skype provides a single click option to clear all the history from you account, but the feature is buried deep under options menu.Really deep!. To clear history follow the menu Tools –> Options, switch to Privacy Settings tab available on the left side, click on Show advanced options button and finally hit the button Clear history. Ah! You are almost done. Just confirm a popup it displays on screen and your history is vanished from your account. Join us on Facebook to read all our stories right inside your Facebook news feed.

  Read the article

• Function keys and Hot are switched

  - by Brian

  I recently got a new laptop and installed 12.10 on it. I noticed right away that the "hot keys" on the F keys didn't always do what was pictured and also I noticed that the "hot keys" and the function keys were reversed. e.g. to close a window I have to hit alt-fn-F2 instead of just alt-F2. This is pretty annoying because I've been using the same keyboard shortcuts for years and I don't really want to have to re-learn them. I would also like to switch what the hot keys do, for example the F3 key is pictured as increase screen brightness but it really puts the computer to sleep. I would like to change this back to increase the brightness I looked in keyboard shortcuts settings but these options are not in there. I also downloaded gconf-editor but was unable to find where to change the shortcuts on it. (they weren't at apps \ metacity \ keybinding_commands like others described) any help would be greatly appreciated

  Read the article

• What steps should be taken to make sure your software is usable by disabled people?

  - by Cromulent

  I want to make sure a piece of software I am writing is usable by people with various disabilities such as blindness and an inability to use a mouse and / or keyboard. Unfortunately I have no experience with things such as screen readers or other methods that disabled people use to make using a computer easier / possible. I've never really had much experience with disabilities at all and unfortunately I don't know any disabled people who I can ask. I was wondering what other people do to make sure that their software is available to a wide range of people with varying abilities? This seems to be a subject matter that is often ignored by developers and I think it is a real shame.

  Read the article

• Google accidentally revealed Nexus 5 phone in Android Kitkat launch video

  - by Gopinath

  Today Google officially announced KitKat as the name of the next version of Android OS(v4.4). They posted a video to showcase the unveiling of the KitKat statue at the company’s headquarters, but they accidentally revealed much more. 9to5Google spotted an unreleased Android smartphone in the video and they posted screen grabs of Googlers using it to take photos. This unreleased phone could be the next version of Google Nexus phone. Google few days ago reduced price of Nexus 4 smartphones by $100 and 8 GB version is reported out of inventory. With all these signs it seems to be clear that it is just weeks away for the launch of Google Nexus smartphone. Soon after the news of leaked smartphone spread on blogs, Google pulled Kitkat launch video to private. But few bloggers managed to save a copy of the video and uploaded to other video sharing websites. Check the embedded video

  Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >