Search Results

Search found 11093 results on 444 pages for 'issues'.

Page 407/444 | < Previous Page | 403 404 405 406 407 408 409 410 411 412 413 414  | Next Page >

  • Unique_ptr compiler errors

    - by Godric Seer
    I am designing and entity-component system for a project, and C++ memory management is giving me a few issues. I just want to make sure my design is legitimate. So to start I have an Entity class which stores a vector of Components: class Entity { private: std::vector<std::unique_ptr<Component> > components; public: Entity() { }; void AddComponent(Component* component) { this -> components.push_back(std::unique_ptr<Component>(component)); } ~Entity(); }; Which if I am not mistaken means that when the destructor is called (even the default, compiler created one), the destructor for the Entity, will call ~components, which will call ~std::unique_ptr for each element in the vector, and lead to the destruction of each Component, which is what I want. The component class has virtual methods, but the important part is its constructor: Component::Component(Entity parent) { parent.addComponent(this) // I am not sure if this would work like I expect // Other things here } As long as passing this to the method works, this also does what I want. My confusion is in the factory. What I want to do is something along the lines of: std::shared_ptr<Entity> createEntity() { std::shared_ptr<Entity> entityPtr(new Entity()); new Component(*parent); // Initialize more, and other types of Components return entityPtr; } Now, I believe that this setup will leave the ownership of the Component in the hands of its Parent Entity, which is what I want. First a small question, do I need to pass the entity into the Component constructor by reference or pointer or something? If I understand C++, it would pass by value, which means it gets copied, and the copied entity would die at the end of the constructor. The second, and main question is that code based on this sample will not compile. The complete error is too large to print here, however I think I know somewhat of what is going on. The compiler's error says I can't delete an incomplete type. My Component class has a purely virtual destructor with an implementation: inline Component::~Component() { }; at the end of the header. However since the whole point is that Component is actually an interface. I know from here that a complete type is required for unique_ptr destruction. The question is, how do I work around this? For reference I am using gcc 4.4.6.

    Read the article

  • Parallel For Loop - Problems when adding to a List

    - by Kevin Crowell
    I am having some issues involving Parallel for loops and adding to a List. The problem is, the same code may generate different output at different times. I have set up some test code below. In this code, I create a List of 10,000 int values. 1/10th of the values will be 0, 1/10th of the values will be 1, all the way up to 1/10th of the values being 9. After setting up this List, I setup a Parallel for loop that iterates through the list. If the current number is 0, I add a value to a new List. After the Parallel for loop completes, I output the size of the list. The size should always be 1,000. Most of the time, the correct answer is given. However, I have seen 3 possible incorrect outcomes occur: The size of the list is less than 1,000 An IndexOutOfRangeException occurs @ doubleList.Add(0.0); An ArgumentException occurs @ doubleList.Add(0.0); The message for the ArgumentException given was: Destination array was not long enough. Check destIndex and length, and the array's lower bounds. What could be causing the errors? Is this a .Net bug? Is there something I can do to prevent this from happening? Please try the code for yourself. If you do not get an error, try it a few times. Please also note that you probably will not see any errors using a single-core machine. using System; using System.Collections.Generic; using System.Threading.Tasks; namespace ParallelTest { class Program { static void Main(string[] args) { List<int> intList = new List<int>(); List<double> doubleList = new List<double>(); for (int i = 0; i < 250; i++) { intList.Clear(); doubleList.Clear(); for (int j = 0; j < 10000; j++) { intList.Add(j % 10); } Parallel.For(0, intList.Count, j => { if (intList[j] == 0) { doubleList.Add(0.0); } }); if (doubleList.Count != 1000) { Console.WriteLine("On iteration " + i + ": List size = " + doubleList.Count); } } Console.WriteLine("\nPress any key to exit."); Console.ReadKey(); } } }

    Read the article

  • Help with strange memory behavior. Looking for leaks both in my brain and in my code.

    - by BastiBechtold
    I spent the last few days trying to find memory leaks in a program we are developing. First of all, I tried using some leak detectors. After fixing a few issues, they do not find any leaks any more. However, I am also monitoring my application using perfmon.exe. Performance Monitor reports that 'Private Bytes' and 'Working Set - Private' are steadily rising when the app is used. To me, this suggests that the program is using more and more memory the longer it runs. Internal resources seem to be stable however, so this sounds like leaking to me. The program is loading a DLL at runtime. I suspect that these leaks or whatever they are occur in that library and get purged when the library is unloaded, hence they won't get picked up by the leak detectors. I used both DevPartner BoundsChecker and Virtual Leak Detector to look for memory leaks. Both supposedly catch leaks in DLLs. Also, the memory consumption is increasing in steps and those steps roughly, but not exactly, coincide with certain GUI actions I perform in the application. If these were errors in our code, they should get triggered every single time the actions are performed and not just most of the time. Whenever I am confronted with so much strangeness, I begin to question my basic assumptions. So I turn to you, who know everything, for suggestions. Is there a flaw in my assumptions? Do you have an idea of how to go about troubleshooting a problem like this? Edit: I am currently using Microsoft Visual C++ (x86) on Windows 7 64. Edit2: I just used IBM Purify to hunt for leaks. First of all, it lists a full 30% of the program as leaked memory. This can not be true. I guess it is identifying the whole DLL as leaked or something like that. However, if I search for new leaks every few actions, it reports leaks that correspond with the size increase reported by Performance Monitor. This could be a lead to a leak. Sadly, I am only using the trial version of Purify, so it won't show me the actual location of those leaks. (These leaks only show up at runtime. When the program exits, there are no leaks whatsoever reported by any tool.)

    Read the article

  • Any socket programmers out there? How can I obtain the IPv4 address of the client?

    - by Dr Dork
    Hello! I'm prepping for a simple work project and am trying to familiarize myself with the basics of socket programming in a Unix dev environment. At this point, I have some basic server side code setup to listen for incoming TCP connection requests from clients after the parent socket has been created and is set to listen... int sockfd, newfd; unsigned int len; socklen_t sin_size; char msg[]="Test message sent"; char buf[MAXLEN]; int st, rv; struct addrinfo hints, *serverinfo, *p; struct sockaddr_storage client; char ip[INET6_ADDRSTRLEN]; . . //parent socket creation and listen code omitted for simplicity . //wait for connection requests from clients while(1) { //Returns the socketID and address of client connecting to socket if( ( newfd = accept(sockfd, (struct sockaddr *)&client, &len) ) == -1 ){ perror("Accept"); exit(-1); } if( (rv = recv(newfd, buf, MAXLEN-1, 0 )) == -1) { perror("Recv"); exit(-1); } struct sockaddr_in *clientAddr = ( struct sockaddr_in *) get_in_addr((struct sockaddr *)&client); inet_ntop(client.ss_family, clientAddr, ip, sizeof ip); printf("Receive from %s: query type is %s\n", ip, buf); if( ( st = send(newfd, msg, strlen(msg), 0)) == -1 ) { perror("Send"); exit(-1); } //ntohs is used to avoid big-endian and little endian compatibility issues printf("Send %d byte to port %d\n", ntohs(clientAddr->sin_port) ); close(newfd); } } I found the get_in_addr function online and placed it at the top of my code and use it to obtain the IP address of the client connecting... // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } but the function always returns the IPv6 IP address since thats what the sa_family property is set as. My question is, is the IPv4 IP address stored anywhere in the data I'm using and, if so, how can I access it? Thanks so much in advance for all your help!

    Read the article

  • Tools to Help out with

    - by peter
    I am developing a C# .NET application. In the app.config file I add trace logging as shown, <?xml version="1.0" encoding="UTF-8" ?> <configuration> <system.diagnostics> <trace autoflush="true" /> <sources> <source name="System.Net.Sockets" maxdatasize="1024"> <listeners> <add name="MyTraceFile"/> </listeners> </source> </sources> <sharedListeners> <add name="MyTraceFile" type="System.Diagnostics.TextWriterTraceListener" initializeData="System.Net.trace.log" /> </sharedListeners> <switches> <add name="System.Net" value="Verbose" /> </switches> </system.diagnostics> </configuration> Are there any good tools around to analyse the log file that is output? The output looks like this, System.Net.Sockets Verbose: 0 : [5900] Data from Socket#8764489::Send DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000000 : 4D 49 4D 45 2D 56 65 72-73 69 6F 6E 3A 20 31 2E : MIME-Version: 1. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000060 : 65 3A 20 37 20 41 70 72-20 32 30 31 30 20 31 35 : e: 7 Apr 2010 15 DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000070 : 3A 32 32 3A 34 30 20 2B-31 32 30 30 0D 0A 53 75 : :22:40 +1200..Su DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000080 : 62 6A 65 63 74 3A 20 5B-45 72 72 6F 72 5D 20 45 : bject: [Error] E DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000090 : 78 63 65 70 74 69 6F 6E-20 69 6E 20 53 79 6E 63 : xception in Sync DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000A0 : 53 65 72 76 69 63 65 20-28 32 30 30 38 2E 30 2E : Service (2008.0. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000B0 : 33 30 34 2E 31 32 33 34-32 29 0D 0A 43 6F 6E 74 : 304.12342)..Cont DateTime=2010-04-07T03:22:40.1067012Z Is there anything that can take the output shown above (my output is a text file 100mb in size), group together packets, and help out with finding particular issues I would like to hear about it. Thanks.

    Read the article

  • Magento user created attribute for products is not saved...

    - by Elzo Valugi
    I am fighting an apparently simple thing for about two days now. I hope somebody can help. I created the myUpdate EAV attribute class Company_Module_Model_Resource_Eav_Mysql4_Setup extends Mage_Eav_Model_Entity_Setup { public function getDefaultEntities() { return array( 'catalog_product' => array( 'entity_model' => 'catalog/product', 'attribute_model' => 'catalog/resource_eav_attribute', 'table' => 'catalog/product', 'additional_attribute_table' => 'catalog/eav_attribute', 'entity_attribute_collection' => 'catalog/product_attribute_collection', 'attributes' => array( 'my_update' => array( 'label' => 'My timestamp', 'type' => 'datetime', 'input' => 'date', 'default' => '', 'class' => 'validate-date', 'backend' => 'eav/entity_attribute_backend_datetime', 'frontend' => '', 'table' => '', 'source' => '', 'global' => Mage_Catalog_Model_Resource_Eav_Attribute::SCOPE_GLOBAL, 'visible' => true, 'required' => false, 'user_defined' => true, 'searchable' => false, 'filterable' => false, 'comparable' => false, 'visible_on_front' => false, 'visible_in_advanced_search' => false, 'unique' => false, 'apply_to' => 'simple', ) ) ) ); } } The attribute is created OK and on install appears correctly in the list of attributes. Later I do // for product 1 $product->setMyUpdate($stringDate); // string this format: yyyy-MM-dd HH:mm:ss $product->save(); // and saves without issues * in admin module But later when I do: $product = Mage::getModel('catalog/product')->load(1); var_dump($product->getMyUpdate()); // returns null Somehow the data is not really saved.. or I am not retrieving it correctly. Please advice on how to get the data and where the data is saved in the DB so I can check at if the insert is done correctly. Thanks.

    Read the article

  • How to access a grid inside of a RichTextBox in Silverlight 4?

    - by benrick
    I am trying to allow a user to create a table inside of a RichTextBox. I can create a Grid inside of the RichTextBox, but I am having some issues with it. I start with this XAML in the Grid. <RichTextBox Name="TB1" AcceptsReturn="True"> <Paragraph TextAlignment="Center"> Hi everybody </Paragraph> <Paragraph> <InlineUIContainer> <Grid Background="Black"> <Grid.RowDefinitions> <RowDefinition Height="10" /> <RowDefinition Height="10" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="10" /> <ColumnDefinition Width="10" /> </Grid.ColumnDefinitions> </Grid> </InlineUIContainer> </Paragraph> <Paragraph> How are you today? </Paragraph> </RichTextBox> Then when I get the XAML out using the Xaml property of the RichTextBox I get this XAML. <Section xml:space="preserve" HasTrailingParagraphBreakOnPaste="False" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"> <Paragraph FontSize="11" FontFamily="Portable User Interface" Foreground="#FF000000" FontWeight="Normal" FontStyle="Normal" FontStretch="Normal" TextAlignment="Center"> <Run Text="Hi everybody" /> </Paragraph> <Paragraph FontSize="11" FontFamily="Portable User Interface" Foreground="#FF000000" FontWeight="Normal" FontStyle="Normal" FontStretch="Normal" TextAlignment="Left"> <Run /> </Paragraph> <Paragraph FontSize="11" FontFamily="Portable User Interface" Foreground="#FF000000" FontWeight="Normal" FontStyle="Normal" FontStretch="Normal" TextAlignment="Left"> <Run Text="How are you today?" /> </Paragraph> </Section> Notice here that the Grid has turned into an empty Run element. Anyone know why this happens?

    Read the article

  • Unable to add item to dataset in Linq to SQL

    - by Mike B
    I am having an issue adding an item to my dataset in Linq to SQL. I am using the exact same method in other tables with no problem. I suspect I know the problem but cannot find an answer (I also suspect all i really need is the right search term for Google). Please keep in mind this is a learning project (Although it is in use in a business) I have posted my code and datacontext below. What I am doing is: Create a view model (Relevant bits are shown) and a simple wpf window that allows editing of 3 properties that are bound to the category object. Category is from the datacontext. Edit works fine but add does not. If I check GetChangeSet() just before the db.submitChanges() call there are no adds, edits or deletes. I suspect an issue with the fact that a Category added without a Subcategory would be an orphan but I cannot seem to find the solution. Command code to open window: CategoryViewModel vm = new CategoryViewModel(); AddEditCategoryWindow window = new AddEditCategoryWindow(vm); window.ShowDialog(); ViewModel relevant stuff: public class CategoryViewModel : ViewModelBase { public Category category { get; set; } // Constructor used to Edit a Category public CategoryViewModel(Int16 categoryID) { db = new OITaskManagerDataContext(); category = QueryCategory(categoryID); } // Constructor used to Add a Category public CategoryViewModel() { db = new OITaskManagerDataContext(); category = new Category(); } } The code for saving changes: // Don't close window unless all controls are validated if (!vm.IsValid(this)) return; var changes = vm.db.GetChangeSet(); // DEBUG try { vm.db.SubmitChanges(ConflictMode.ContinueOnConflict); } catch (ChangeConflictException) { vm.db.ChangeConflicts.ResolveAll(RefreshMode.KeepChanges); vm.db.SubmitChanges(); } The Xaml (Edited fror brevity): <TextBox Text="{Binding category.CatName, Mode=TwoWay, ValidatesOnDataErrors=True, UpdateSourceTrigger=PropertyChanged}" /> <TextBox Text="{Binding category.CatDescription, ValidatesOnDataErrors=True, UpdateSourceTrigger=PropertyChanged}" /> <CheckBox IsChecked="{Binding category.CatIsInactive, Mode=TwoWay}" /> IssCategory in the Issues table is the old, text based category. This field is no longer used and will be removed from the database as soon as this is working and pushed live.

    Read the article

  • Open Cl.I just need to convert the code to using two work items in the for loop .Currentlly it uses one

    - by user1660282
    spmv_csr_scalar_kernel(const int num_rows , const int * ptr , const int * indices , const float * data , const float * x, float * y) { int row = get_global_id(0); if(row < num_rows) { float dot = 0; int row_start = ptr[row]; int row_end = ptr[row+1]; for (int jj = row_start; jj < row_end; jj++) { dot += data[jj] * x[indices[jj]]; } y[row] += dot; } } Above is the Open Cl code for multiplying a sparse matrix in CSR format with a Column vector.It uses one global work item per for loop.Can anybody help me in using two work items in each for loop.I am new to open cl and get a lot of issues if I modify even the smallest thing.Please help me.This a part of my project.I made it this parallel but I wanna make it more parallel.Please help me if you can.plzzzz A single work item executes the for loop from row_start to row_end.I want that this row or for loop is further divided into two parts each executed by a single work item.How do I go on accomplishing that? This is what I could come up with but its returning the wrong output.plzz help __kernel void mykernel(__global int* colvector,__global int* val,__global int* result,__global int* index,__global int* rowptr,__global int* sync) { __global int vals[8]={0,0,0,0,0,0,0,0}; for(int i=0;i<4;i++) { result[i]=0; } barrier(CLK_GLOBAL_MEM_FENCE); int thread_id=get_global_id(0); int warp_id=thread_id/2; int lane=(thread_id)&1; int row=warp_id; if(row<4) { int row_start = rowptr[row]; int row_end = rowptr[row+1]; vals[thread_id]=0; for (int i = row_start+lane; i<row_end; i+=2) { vals[thread_id]+=val[i]*colvector[index[i]]; } vals[thread_id]+=vals[thread_id+1]; if(lane==0){ result[row] += vals[thread_id]; } } }

    Read the article

  • Large number of UPDATE queries slowing down page

    - by Bryan Lewis
    I am reading and validating large fixed-width text files (range from 10-50K lines) that are submitted via our ASP.net website (coded in VB.Net). I do an initial scan of the file to check for basic issues (line length, etc). Then I import each row into a MS SQL table. Each DB rows basically consists of a record_ID (Primary, auto-incrementing) and about 50 varchar fields. After the insert is done, I run a validation function on the file that checks each field in each row based on a bunch of criteria (trimmed length, isnumeric, range checks, etc). If it finds an error in any field, it inserts a record into the Errors table, which has an error_ID, the record_ID and an error message. In addition, if the field fails in a particular way, I have to do a "reset" on that field. A reset might consist of blanking the entire field, or simply replacing the value with another value (e.g. replacing the string with a new one that has all illegals chars taken out). I have a 5,000 line test file. The upload, initial check, and import takes about 5-6 seconds. The detailed error check and insert into the Errors table takes about 5-8 seconds (this file has about 1200 errors in it). However, the "resets" part takes about 40-45 seconds for 750 fields that need to be reset. When I comment out the resets function (returning immediately without actually calling the UPDATE stored proc), the process is very fast. With the resets turned on, the pages take 50 seconds to return. My UPDATE stored proc is using some recommended code from http://sommarskog.se/dynamic_sql.html, whereby it uses CASE instead of dynamic SQL: UPDATE dbo.Records SET dbo.Records.file_ID = CASE @field_name WHEN 'file_ID' THEN @field_value ELSE file_ID END, . . (all 50 varchar field CASE statements here) . WHERE dbo.Records.record_ID = @record_ID Is there any way I can help my performance here. Can I somehow group all of these UPDATE calls into a single transaction? Should I be reworking the UPDATE query somehow? Or is it just sheer quantity of 750+ UPDATEs and things are just slow (it's a quad proc server with 8GB ram). Any suggestions appreciated.

    Read the article

  • Jquery $.post and PHP - Prevent the ability to use script outside of main website.

    - by Tim
    I have a PHP script setup using Jquery $.post which would return a response or do an action within the targeted .php file within $.post. Eg. My page has a form where you type in your Name. Once you hit the submit form button, $.post is called and sends the entered Name field value into "mywebsite.xyz/folder/ajaxscript.php" If a user was to visit "mywebsite.xyz/folder/ajaxscript.php" directly and somehow POST the data to the script, the script would return a response / do an action, based on the submitted POST data. The problem is, I don't want others to be able to periodically "call" an action or request a response from my website without using the website directly. Theoretically, right now you could determine what Name values my website allows without even visiting it, or you could call an action without going through the website, by simply visiting "mywebsite.xyz/folder/ajaxscript.php" So, what measures can I take to prevent this from happening? So far my idea is to ensure that it is a $_POST and not a $_GET - so they cannot manually enter it into the browser, but they could still post data to the script... Another measure is to apply a session key that expires, and is only valid for X amount of visits until they revisit the website. ~ Or, just have a daily "code" that changes and they'd need to grab this code from the website each day to keep their direct access to the script working (eg. I pass the daily "code" into each post request. I then check that code matches in the ajax php script.) However, even with these meaures, they will STILL have access to the scripts so long as they know how to POST the data, and also get the new code each day. Also, having a daily code requirement will cause issues when visiting the site at midnight (12:00am) as the code will change and the script will break for someone who is on the website trying to call the script, with the invalid code being passed still. I have attempted using .htaccess however using: order allow,deny deny from all Prevents legitimate access, and I'd have to add an exception so the website's IP is allowed to access it.. which is a hassle to update I think. Although, if it's the only legitimate solution I guess I'll have to. If I need to be more clear please let me know.

    Read the article

  • iPhone Image Resources, ICO vs PNG, app bundle filesize

    - by Jasarien
    My application has a collection of around 1940 icons that are used throughout. They're currently in ICO and new images provided to me come in ICO format too. I have noticed that they contain a 16x16 and 32x32 representation of each icon in one file. Each file is roughly 4KB in filesize (as reported by finder, but ls reports that they vary from being ~1000 bytes to 5000 bytes) A very small number of these icons only contain the 32x32 representation, and as a result are only around 700 bytes in size. Currently I am bundling these icons with my application and they are inflating the size of the app a bit more than I would like. Altogether, the images total just about 25.5MB. Xcode must do some kind of compression because the resulting app bundle is about 12.4MB. Compressing this further into a ZIP (as it would be when submitted to the App Store), results in a final file of 5.8MB. I'm aware that the maximum limit for over the air App Store downloads has been raised to 20MB since the introduction of the iPad (I'm not sure if that extends to iPhone apps as well as iPad apps though, if not the limit would be 10MB). My worry is that new icons are going to be added (sometimes up to 10 icons per week), and will continue to inflate the app bundle over time. What is the best way to distribute these icons with my app? Things I've tried and not had much success with: Converting the icons from ICO to PNG: I tried this in the hopes that the pngcrush utility would help out with the filesize. But it appears that it doesn't make much of a difference between a normal PNG and a crushed png (I believe it just optimises the image for display on the iPhone's GPU rather than compress it's size). Also in going from ICO to PNG actually increased the size of the icon file... Zipping the images, and then uncompressing them on first run. While this did reduce the overall image sizes, I found that the effort needed to unzip them, copy them to the documents folder and ensure that duplication doesn't happen on upgrades was too much hassle to be worth the benefit. Also, on original and 3G iPhones unzipping and copying around 25MB of images takes too long and creates a bad experience... Things I've considered but not yet tried: Instead of distributing the icons within the app bundle, host them online, and download each icon on demand (it depends on the user's data as to which icons will actually be displayed and when). Issues with this is that bandwidth costs money, and image downloads will be bandwidth intensive. However, my app currently has a small userbase of around 5,500 users (of which I estimate around 1500 to be active based on Flurry stats), and I have a huge unused bandwidth allowance with my current hosting package. So I'm open to thoughts on how to solve this tricky issue.

    Read the article

  • jquery ie6 issue swaping videos through hide/show while playing.

    - by user217181
    So my code is: Click the link show the div. I'm using the jquery flash embed object. $(document).ready( function() { $('a.overview').click( function() { $('#overview').show(); // show div.contact $('#evaulting').hide(); // hide div.contact $('#his').hide(); // hide div.contact }); }); $(document).ready( function() { $('a.evaulting').click( function() { $('#evaulting').show(); // show div.contact $('#overview').hide(); // hide div.contact $('#his').hide(); // hide div.contact }); }); <div id="overview" style="display:none"> <ul> <li rel="play-norelated.swf:680:480:true:ffffff" class="flash-replaced"> <embed width="680" height="480" type="application/x-shockwave-flash" src="play-norelated.swf" pluginspage="http://www.adobe.com/go/getflashplayer" flashvars="playVideo=ent_web_480x" bgcolor="ffffff" /> <div class="alt"><h1>To Play Iron Mountain Videos - You will need to upgrade your Flash Player</h1> <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" /></a></p></div> </li> </ul> </div> <div id="evaulting" style="display:none"> <ul> <li rel="play-norelated.swf:680:480:true:ffffff" class="flash-replaced"> <embed width="680" height="480" type="application/x-shockwave-flash" src="play-norelated.swf" pluginspage="http://www.adobe.com/go/getflashplayer" flashvars="playVideo=evaulting_web_480x" bgcolor="ffffff" /> <div class="alt"><h1>To Play Iron Mountain Video's - You will need to upgrade your Flash Player</h1> <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" /></a></p></div> </li> </ul> </div> When I repeat this code and get the second video to load on click. It works in all browsers. The only issue I'm running into is that in IE6 the video keeps playing and in other browsers it stops the video your watching and loads the one you clicked on. I looked into using the .remove object or the .append to a div, but I can't seem to get that to work and if it does work will it play nice with IE6. Try it out and maybe solve my issues.

    Read the article

  • Moving a unit precisely along a path in x,y coordinates

    - by Adam Eberbach
    I am playing around with a strategy game where squads move around a map. Each turn a certain amount of movement is allocated to a squad and if the squad has a destination the points are applied each turn until the destination is reached. Actual distance is used so if a squad moves one position in the x or y direction it uses one point, but moving diagonally takes ~1.4 points. The squad maintains actual position as float which is then rounded to allow drawing the position on the map. The path is described by touching the squad and dragging to the end position then lifting the pen or finger. (I'm doing this on an iPhone now but Android/Qt/Windows Mobile would work the same) As the pointer moves x, y points are recorded so that the squad gains a list of intermediate destinations on the way to the final destination. I'm finding that the destinations are not evenly spaced but can be further apart depending on the speed of the pointer movement. Following the path is important because obstacles or terrain matter in this game. I'm not trying to remake Flight Control but that's a similar mechanic. Here's what I've been doing, but it just seems too complicated (pseudocode): getDestination() { - self.nextDestination = remove_from_array(destinations) - self.gradient = delta y to destination / delta x to destination - self.angle = atan(self.gradient) - self.cosAngle = cos(self.angle) - self.sinAngle = sin(self.angle) } move() { - get movement allocation for this turn - if self.nextDestination not valid - - getNextDestination() - while(nextDestination valid) && (movement allocation remains) { - - find xStep and yStep using movement allocation and sinAngle/cosAngle calculated for current self.nextDestination - - if current position + xStep crosses the destination - - - find x movement remaining after self.nextDestination reached - - - calculate remaining direct path movement allocation (xStep remaining / cosAngle) - - - make self.position equal to self.nextDestination - - else - - - apply xStep and yStep to current position - } - round squad's float coordinates to integer screen coordinates - draw squad image on map } That's simplified of course, stuff like sign needs to be tweaked to ensure movement is in the right direction. If trig is the best way to do it then lookup tables can be used or maybe it doesn't matter on modern devices like it used to. Suggestions for a better way to do it? an update - iPhone has zero issues with trig and tracking tens of positions and tracks implemented as described above and it draws in floats anyway. The Bresenham method is more efficient, trig is more precise. If I was to use integer Bresenham I would want to multiply by ten or so to maintain a little more positional accuracy to benefit collisions/terrain detection.

    Read the article

  • Anybody Know of any Tools to help Analysing .NET Trace Log Files?

    - by peter
    I am developing a C# .NET application. In the app.config file I add trace logging as shown, <?xml version="1.0" encoding="UTF-8" ?> <configuration> <system.diagnostics> <trace autoflush="true" /> <sources> <source name="System.Net.Sockets" maxdatasize="1024"> <listeners> <add name="MyTraceFile"/> </listeners> </source> </sources> <sharedListeners> <add name="MyTraceFile" type="System.Diagnostics.TextWriterTraceListener" initializeData="System.Net.trace.log" /> </sharedListeners> <switches> <add name="System.Net" value="Verbose" /> </switches> </system.diagnostics> </configuration> Are there any good tools around to analyse the log file that is output? The output looks like this, System.Net.Sockets Verbose: 0 : [5900] Data from Socket#8764489::Send DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000000 : 4D 49 4D 45 2D 56 65 72-73 69 6F 6E 3A 20 31 2E : MIME-Version: 1. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000060 : 65 3A 20 37 20 41 70 72-20 32 30 31 30 20 31 35 : e: 7 Apr 2010 15 DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000070 : 3A 32 32 3A 34 30 20 2B-31 32 30 30 0D 0A 53 75 : :22:40 +1200..Su DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000080 : 62 6A 65 63 74 3A 20 5B-45 72 72 6F 72 5D 20 45 : bject: [Error] E DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000090 : 78 63 65 70 74 69 6F 6E-20 69 6E 20 53 79 6E 63 : xception in Sync DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000A0 : 53 65 72 76 69 63 65 20-28 32 30 30 38 2E 30 2E : Service (2008.0. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000B0 : 33 30 34 2E 31 32 33 34-32 29 0D 0A 43 6F 6E 74 : 304.12342)..Cont DateTime=2010-04-07T03:22:40.1067012Z Is there anything that can take the output shown above (my output is a text file 100mb in size), group together packets, and help out with finding particular issues I would like to hear about it. Thanks.

    Read the article

  • dojo layout tutorial dor version 1.7 doesn't work for 1.7.2

    - by Sheena
    This is sortof a continuation to dojo1.7 layout acting screwy. So I made some working widgets and tested them out, i then tried altering my work using the tutorial at http://dojotoolkit.org/documentation/tutorials/1.7/dijit_layout/ to make the layout nice. After failing at that in many interesting ways (thus my last question) I started on a new path. My plan is now to implement the layout tutorial example and then stick in my widgets. For some reason even following the tutorial wont work... everything loads then disappears and I'm left with a blank browser window. Any ideas? It just struck me that it could be browser compatibility issues, I'm working on Firefox 13.0.1. As far as I know Dojo is supposed to be compatible with this... anyway, have some code: HTML: <body class="claro"> <div id="appLayout" class="demoLayout" data-dojo-type="dijit.layout.BorderContainer" data-dojo-props="design: 'headline'"> <div class="centerPanel" data-dojo-type="dijit.layout.ContentPane" data-dojo-props="region: 'center'"> <div> <h4>Group 1 Content</h4> <p>stuff</p> </div> <div> <h4>Group 2 Content</h4> </div> <div> <h4>Group 3 Content</h4> </div> </div> <div class="edgePanel" data-dojo-type="dijit.layout.ContentPane" data-dojo-props="region: 'top'"> Header content (top) </div> <div id="leftCol" class="edgePanel" data-dojo-type="dijit.layout.ContentPane" data-dojo-props="region: 'left', splitter: true"> Sidebar content (left) </div> </div> </body> Dojo Configuration: var dojoConfig = { baseUrl: "${request.static_url('mega:static/js')}", //this is in a mako template tlmSiblingOfDojo: false, packages: [ { name: "dojo", location: "libs/dojo" }, { name: "dijit", location: "libs/dijit" }, { name: "dojox", location: "libs/dojox" }, ], parseOnLoad: true, has: { "dojo-firebug": true, "dojo-debug-messages": true }, async: true }; other js stuff: require(["dijit/layout/BorderContainer", "dijit/layout/TabContainer", "dijit/layout/ContentPane", "dojo/parser"]); css: html, body { height: 100%; margin: 0; overflow: hidden; padding: 0; } #appLayout { height: 100%; } #leftCol { width: 14em; }

    Read the article

  • asp.net mvc How to test controllers correctly

    - by Simon G
    Hi, I'm having difficulty testing controllers. Original my controller for testing looked something like this: SomethingController CreateSomethingController() { var somethingData = FakeSomethingData.CreateFakeData(); var fakeRepository = FakeRepository.Create(); var controller = new SomethingController(fakeRepository); return controller; } This works fine for the majority of testing until I got the Request.IsAjaxRequest() part of code. So then I had to mock up the HttpContext and HttpRequestBase. So my code then changed to look like: public class FakeHttpContext : HttpContextBase { bool _isAjaxRequest; public FakeHttpContext( bool isAjaxRequest = false ) { _isAjaxRequest = isAjaxRequest; } public override HttpRequestBase Request { get { string ajaxRequestHeader = ""; if ( _isAjaxRequest ) ajaxRequestHeader = "XMLHttpRequest"; var request = new Mock<HttpRequestBase>(); request.SetupGet( x => x.Headers ).Returns( new WebHeaderCollection { {"X-Requested-With", ajaxRequestHeader} } ); request.SetupGet( x => x["X-Requested-With"] ).Returns( ajaxRequestHeader ); return request.Object; } } private IPrincipal _user; public override IPrincipal User { get { if ( _user == null ) { _user = new FakePrincipal(); } return _user; } set { _user = value; } } } SomethingController CreateSomethingController() { var somethingData = FakeSomethingData.CreateFakeData(); var fakeRepository = FakeRepository.Create(); var controller = new SomethingController(fakeRepository); ControllerContext controllerContext = new ControllerContext( new FakeHttpContext( isAjaxRequest ), new RouteData(), controller ); controller.ControllerContext = controllerContext; return controller; } Now its got to that stage in my controller where I call Url.Route and Url is null. So it looks like I need to start mocking up routes for my controller. I seem to be spending more time googling on how to fake/mock objects and then debugging to make sure my fakes are correct than actual writing the test code. Is there an easier way in to test a controller? I've looked at the TestControllerBuilder from MvcContrib which helps with some of the issues but doesn't seem to do everything. Is there anything else available that will do the job and will let me concentrate on writing the tests rather than writing mocks? Thanks

    Read the article

  • Implementing a logging library in .NET with a database as the storage medium

    - by Dave
    I'm just starting to work on a logging library that everyone can use to keep track of any sort of system information while the user is running our application. The simplest example so far is to track Info, Warnings, and Errors. I want all plugins to be able to use this feature, but since each developer might have a different idea of what's important to report, I want to keep this as generic as possible. In the C++ world, I would normally use something like a stl::pair<string,string> to act as a key value pair structure, and have a stl::list of these to act as a "row" in the log. The log cache would then be a list<list<pair<string,string>>> (ugh!). This way, the developers can use a const string key like INFO, WARNING, ERROR to have a consistent naming for a column in the database (for SELECTing specific types of information). I'd like the database to be able to deal with any number of distinct column names. For example, John might have an INFO row with a column called USER, and Bill might have an INFO row with a column called FILENAME. I want the log viewer to be able to display all information, and if one report doesn't have a value for INFO / FILENAME, those fields should just appear blank. So one option is to use List<List<KeyValuePair<String,String>>, and the another is to have the log library consumer somehow "register" its schema, and then have the database do an ALTER TABLE to handle this situation. Yet another idea is to have a table that's just for key value pairs, with a foreign key that maps the key value pairs back to the original log entry. I obviously don't want logging to bog down the system, so I only lock the log cache to make a copy of the data (and remove the already-copied data), then a background thread will dump the information to the database. My specific questions regarding this are: Do you see any performance issues? In other words, have you ever tried something like this and found that certain things just don't work well in practice? Is there a more .NETish way to implement the key value pairs, other than List<List<KeyValuePair<String,String>>>? Even if there is a way to do #2 better, is the ALTER TABLE idea I proposed above a Bad Thing? Would you recommend multiple databases over a single one? I don't yet have an idea of how frequently the log would get written to, but we ideally would like to have lots of low level information. Perhaps there should be a DB with a fixed schema only for the low level stuff, and then another DB that's more flexible for reporting information back to users.

    Read the article

  • Facebook Like not Pulling Title

    - by matthewb
    I am having some issues with the new facebook like button. It shows up fine, however for some reason it's not pulling the title of the page. I have the and I am using og:title, all are filled in, when I view the source of the iframe created on the load of he button, the in there is blank. I am also trying to put the tweetmeme and that's seeing that title and not the meta, or the normal page title. What am I doing wrong? <html xmlns="http://www.w3.org/1999/xhtml" xmlns:og="http://opengraphprotocol.org/schema/" xmlns:fb="http://developers.facebook.com/schema/"> <fb:like href="<?=$url?>" layout="button_count" show_faces="false" width="100" font="arial"></fb:like> UPDATE: Complete Head <head> <title>Ladder 15 Gets A New Menu!</title> <meta content="Growing up can be hard to do, especially in the Mad River family. But Ladder 15 has come into its own over the winter.&nbsp; With some new cocktails, wine selection, a hefty new beer list and veteran Chef David Ansill in the kitchen, you can check your fist pump at" name="Description"> <meta content="" name="Keywords"> <meta content="cities2night inc." name="author"> <meta content="Cities2Night 2010" name="copyright"> <meta content="en-us" name="language"> <meta content="General" name="rating"> <meta content="index,follow" name="robots"> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> <meta content="Ladder 15 gets a new menu!" name="tweetmeme-title"> <meta content="Ladder 15 gets a new menu!" property="og:title"> <meta content="article" property="og:type"> <meta content="http://philly.cities2night.com/articles/show/listing/11/ladder-15-gets-a-new-menu" property="og:url"> <meta content="http://philly.cities2night.com/public/article_images/11.jpg" property="og:image"> <meta content="c0176da0ec38aaf107c0ef6c8cdeee38" property="fb:app_id"> <meta content="Philly2night.com" property="og:site_name"> <meta content="Growing up can be hard to do, especially in the Mad River family. But Ladder" property="og:description"></head>

    Read the article

  • Serialization of non-required fields in protobuf-net

    - by David Hedlund
    I have a working java client that is communicating with Google, through ProtoBuf serialized messages. I am currently trying to translate that client into C#. I have a .proto file where the parameter appId is an optional string. Its default value in the C# representation as generated by the protobuf-net library is an empty string, just as it is in the java representation of the same file. message AppsRequest { optional AppType appType = 1; optional string query = 2; optional string categoryId = 3; optional string appId = 4; optional bool withExtendedInfo = 6; } I find that when I explicitly set appId to "" in the java client, the client stops working (403 Bad Request from Google). When I explicitly set appId to null in the java client, everything works, but only because hasAppId is being set to false (I'm uncertain as to how that affects the serialization). In the C# client, I always get 403 responses. I don't see any logic behind the distinction between not setting a value, and setting the default value, that seems to make all the difference in the java client. Since the output is always a binary stream, I am not sure if the successful java messages are being serialized with an empty string, or not serialized at all. In the C# client, I've tried setting IsRequired to true on the ProtoMember attribute, to force them to serialize, and I've tried setting the default value to null, and explicitly set "", so I'm quite sure I've tried some configuration where the value is being serialized. I've also played around with ProtoBuf.ProtoIgnore and at some point, removing the appId parameter altogether, but I haven't been able to avoid the 403 errors in C#. I've tried manually copying the serialized string from java, and that resolved my issues, so I'm certain that the rest of the HTTP Request is working, and the error can be traced to the serialized object. My serialization is simply this: var clone = ProtoBuf.Serializer.DeepClone(request); MemoryStream ms = new MemoryStream(2000); ProtoBuf.Serializer.Serialize(ms, clone); var bytearr = ms.ToArray(); string encodedData = Convert.ToBase64String(bytearr); I'll admit to not being quite sure about what DeepClone does. I've tried both with and without it...

    Read the article

  • Can't access font resource in Silverlight class library

    - by Matt
    I have a reasonably large Silveright 3.0 project on the go, and I'm having issues accessing a couple of custom font resources from within one of the assemblies. I've got a working test solution where I have added a custom font as a resource, and can access it fine from XAML using: <TextBlock Text="Test" FontFamily="FontName.ttf#Font Name" /> The test solution consists of the TestProject.Application and the TestProject.Application.Web projects, with all the fun and games obviously in the TestProject.Application project However, when I try this in my main solution, the fonts refuse to show in the correct type face (instead showing in the default font). There's no difference in the way the font has been added to project between the test solution and the main solution, and the XAML is identical. However, there is a solution layout difference. In the main solution, as well as having a MainApp.Application and MainApp.Application.Web project, I also have a MainApp.Application.ViewModel project and a MainApp.Application.Views project, and the problem piece of XAML is the in the MainApp.Application.Views project (not the .Application project like the test solution). I've tried putting the font into either the .Application or .Application.Views project, tried changing the Build Action to Content, Embedded Resource etc, all to no avail. So, is there an issue accessing font resources from a child assembly that I don't know about, or has anyone successfully done this? My long term need will be to have the valid custom fonts being stored as resources in a separate .Application.FontLibrary assembly that will be on-demand downloaded and cached, and the XAML controls in the .Application.Views project will need to reference this FontLibrary assembly to get the valid fonts. I've also tried xcreating this separate font library assembly, and I can't seem to get the fonts from the second assembly. As some additional information, I've also tried the following font referencing approaches: <TextBlock Text="Test" FontFamily="/FontName.ttf#Font Name" /> <TextBlock Text="Test" FontFamily="pack:application,,,/FontName.ttf#Font Name" /> <TextBlock Text="Test" FontFamily="pack:application,,,/MainApp.Application.Views;/FontName.ttf#Font Name" /> <TextBlock Text="Test" FontFamily="pack:application,,,/MainApp.Application.Views;component/FontName.ttf#Font Name" /> And a few similar variants with different assembly references/sub directories/random semi colons. And so far nothing works... anyone struck this (and preferably solved it)?

    Read the article

  • Should I add try/catch around when casting on an attribute of JSP implicit object?

    - by Michael Mao
    Hi all: Basically what I mean is like this: List<String[]> routes = (List<String[]>)application.getAttribute("routes"); For the above code, it tries to get an attribute named "routes" from the JSP implicit object - application. But as everyone knows, after this line of code, routes may very well contains a null - which means this application hasn't got an attribute named "routes". Is this "casting on null" good programming practice in Java or not? Basically I try to avoid exceptions such as java.io.InvalidCastException I reckon things like this are more as "heritage" of Java 1.4 when generic types were not introduced to this language. So I guess everything stored in application attributes as Objects (Similar to traditional ArrayList). And when you do "downcast", there might be invalid casts. What would you do in this case? Update: Just found that although in the implicit object application I did store a List of String arrays, when I do this : List<double[]> routes = (List<double[]>)application.getAttribute("routes"); It doesn't produce any error... And I felt not comfortable already... And even with this code: out.print(routes.get(0)); It does print out something strange : [Ljava.lang.String;@18b352f Am I printing a "pointer to String"? I can finally get an exception like this: out.print(routes.get(0)[1]); with error : java.lang.ClassCastException: [Ljava.lang.String; Because it was me to add the application attribute, I know which type should it be cast to. I feel this is not "good enough", what if I forget the exact type? I know there are still some cases where this sort of thing would happen, such as in JSP/Servlet when you do casting on session attributes. Is there a better way to do this? Before you say:"OMG, why you don't use Servlets???", I should justify my reason as this: - because my uni sucks, its server can only work with Servlets generated by JSP, and I don't really want to learn how to fix issues like that. look at my previous question on this , and this is uni homework, so I've got no other choice, forget all about war, WEB-INF,etc, but "code everything directly into JSP" - because the professors do that too. :)

    Read the article

  • "state is undetermined" when starting Grails app on CloudFoundry

    - by SeattleStephens
    I have a Grails app that has been running on CloudFoundry for months. I updated the app from Grails 2.0.4 to 2.1.0 and also updated a few plugins I have been using. Now when I push the app to CloudFoundry and do the start, I receive the error: 'appname' state is undetermined, not enough information available. The tomcat Catalina log shows the NoClassDefFoundError below. I've read about issues with the Ivy cache but have not looked into that yet. I have updated vmc to the latest version (0.3.18). SEVERE: Error deploying web application directory ROOT java.lang.NoClassDefFoundError: org/apache/tomcat/PeriodicEventListener at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632) at java.lang.ClassLoader.defineClass(ClassLoader.java:616) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141) at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:2818) at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:1159) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1647) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1526) at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1128) at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1026) at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4421) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4734) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:799) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:779) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:601) at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:1079) at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:1002) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:506) at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1317) at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:324) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:142) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1065) at org.apache.catalina.core.StandardHost.start(StandardHost.java:840) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:463) at org.apache.catalina.core.StandardService.start(StandardService.java:525) at org.apache.catalina.core.StandardServer.start(StandardServer.java:754) at org.apache.catalina.startup.Catalina.start(Catalina.java:595) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414) Caused by: java.lang.ClassNotFoundException: org.apache.tomcat.PeriodicEventListener at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1680) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1526) ... 34 more

    Read the article

  • PHP GD Allowed memory size exhausted

    - by gurun8
    I'm trying to process a directory of JPEG images (roughly 600+, ranging from 50k to 500k) using PHP: GD to resize and save the images but I've hit a bit of a snag quite early in the process. After correctly processing just 3 images (30K, 18K and 231K) I get a Allowed memory size of 16777216 bytes exhausted PHP Fatal error. I'm cycling through the images and calling the code below: list($w, $h) = getimagesize($src); if ($w > $it->width) { $newwidth = $it->width; $newheight = round(($newwidth * $h) / $w); } elseif ($w > $it->height) { $newheight = $it->height; $newwidth = round(($newheight * $w) / $h); } else { $newwidth = $w; $newheight = $h; } // create resize image $img = imagecreatetruecolor($newwidth, $newheight); $org = imagecreatefromjpeg($src); // Resize imagecopyresized($img, $org, 0, 0, 0, 0, $newwidth, $newheight, $w, $h); imagedestroy($org); imagejpeg($img, $dest); // Free up memory imagedestroy($img); I've tried to free up memory with the imagedestroy function but it doesn't seem to have any affect. The script just keeps consistently choking at the imagecreatefromjpeg line of code. I checked the php.ini and the memory_limit = 16M setting seems like it's holding correctly. But I can't figure out why the memory is filling up. Shouldn't it be releasing the memory back to the garbage collector? I don't really want to increase the memory_limit setting. This seems like a bad workaround that could potentially lead to more issues in the future. FYI: I'm running my script from a command prompt. It shouldn't affect the functionality but might influence your response so I thought I should mention it. Can anyone see if I'm just missing something simple or if there's a design flaw here? You'd think that this would be a pretty straightforward task. Surely this has to be possible, right?

    Read the article

  • How to "enable" HTML5 elements in IE that were inserted by AJAX call?

    - by Gidon
    IE does not work good with unknown elements (ie. HTML5 elements), one cannot style them , or access most of their props. Their are numerous work arounds for this for example: http://remysharp.com/2009/01/07/html5-enabling-script/ The problem is that this works great for static HTML that was available on page load, but when one creates HTML5 elements afterward (for example AJAX call containing them, or simply creating with JS), it will mark these newly added elements them as HTMLUnknownElement as supposed to HTMLGenericElement (in IE debugger). Does anybody know a work around for that, so that newly added elements will be recognized/enabled by IE? Here is a test page: <html><head><title>TIME TEST</title> <!--[if IE]> <script src="http://html5shiv.googlecode.com/svn/trunk/html5.js"></script> <![endif]--> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js" type="text/javascript"></script> </head> <body> <time>some time</time> <hr> <script type="text/javascript"> $("time").text("WORKS GREAT"); $("body").append("<time>NEW ELEMENT</time>"); //simulates AJAX callback insertion $("time").text("UPDATE"); </script> </body> </html> In IE you will see the: UPDATE , and NEW ELEMENT. In any other modern browser you will see UPDATE, and UPDATE Solution Using the answer provided I came up with the following piece of javascript to HTML5 enable a whole bunch of elements returned by my ajax call: (function ($) { jQuery.fn.html5Enable = function () { if ($.browser.msie) { $("abbr, article, aside, audio, canvas, details, figcaption, figure, footer, header, hgroup, mark, menu, meter, nav, output, progress, section, summary, time, video", this).replaceWith(function () { if (this.tagName == undefined) return ""; var el = $(document.createElement(this.tagName)); for (var i = 0; i < this.attributes.length; i++) el.attr(this.attributes[i].nodeName, this.attributes[i].nodeValue); el.html(this.innerHtml); return el; }); } return this; }; })(jQuery); Now this can be called whenever you want to append something: var el = $(AJAX_RESULT_OR_HTML_STRING); el.html5Enable(); $("SOMECONTAINER").append(el); See http://code.google.com/p/html5shiv/issues/detail?id=4 for an explanation about what this plugin doesn't do.

    Read the article

< Previous Page | 403 404 405 406 407 408 409 410 411 412 413 414  | Next Page >