Search Results

Search found 12423 results on 497 pages for 'dynamic controls'.

Page 408/497 | < Previous Page | 404 405 406 407 408 409 410 411 412 413 414 415  | Next Page >

• What is a good design pattern / lib for iOS 5 to synchronize with a web service?

  - by Junto

  We are developing an iOS application that needs to synchronize with a remote server using web services. The existing web services have an "operations" style rather than REST (implemented in WCF but exposing JSON HTTP endpoints). We are unsure of how to structure the web services to best fit with iOS and would love some advice. We are also interested in how to manage the synchronization process within iOS. Without going into detailed specifics, the application allows the user to estimate repair costs at a remote site. These costs are broken down by room and item. If the user has an internet connection this data can be sent back to the server. Multiple photographs can be taken of each item, but they will be held in a separate queue, which sends when the connection is optimal (ideally wifi). Our backend application controls the unique ids for each room and item. Thus, each time we send these costs to the server, the server echoes the central database ids back, thus, that they can be synchronized in the mobile app. I have simplified this a little, since the operations contract is actually much larger, but I just want to illustrate the basic requirements without complicating matters. Firstly, the web service architecture: We currently have two operations: GetCosts and UpdateCosts. My assumption is that if we used a strict REST architecture we would need to break our single web service operations into multiple smaller services. This would make the services much more chatty and we would also have to guarantee a delivery order from the app. For example, we need to make sure that containing rooms are added before the item. Although this seems much more RESTful, our perception is that these extra calls are expensive connections (security checks, database calls, etc). Does the type of web api (operation over service focus) determine chunky vs chatty? Since this is mobile (3G), are we better handling lots of smaller messages, or a few large ones? Secondly, the iOS side. What is the current advice on how to manage data synchronization within the iOS (5) app itself. We need multiple queues and we need to guarantee delivery order in each queue (and technically, ordering between queues). The server needs to control unique ids and other properties and echo them back to the application. The application then needs to update an internal database and when re-updating, make sure the correct ids are available in the update message (essentially multiple inserts and updates in one call). Our backend has a ton of business logic operating on these cost estimates. We don't want any of this in the app itself. Currently the iOS app sends the cost data, and then the server echoes that data back with populated ids (and other data). The existing cost data is deleted and the echoed response data is added to the client database on the device. This is causing us problems, because any photos might not have been sent, but the original entity tree has been removed and replaced. Obviously updating the costs tree rather than replacing it would remove this problem, but I'm not sure if there are any nice xcode libraries out there to do such things. I welcome any advice you might have.

  Read the article

• Libgdx 2D Game, Random generated World of random size, how to get mouse coordinates?

  - by Solom

  I'm a noob and English is not my mothertongue, so please bear with me! I'm generating a map for a Sidescroller out of a 2D-array. That is, the array holds different values and I create blocks based on that value. Now, my problem is to match mouse coordinates on screen with the actual block the mouse is pointing at. public class GameScreen implements Screen { private static final int WIDTH = 100; private static final int HEIGHT = 70; private OrthographicCamera camera; private Rectangle glViewport; private Spritebatch spriteBatch; private Map map; private Block block; ... @Override public void show() { camera = new OrthographicCamera(WIDTH, HEIGHT); camera.position.set(WIDTH/2, HEIGHT/2, 0); glViewport = new Rectangle(0, 0, WIDTH, HEIGHT); map = new Map(16384, 256); map.printTileMap(); // Debugging only spriteBatch = new SpriteBatch(); } @Override public void render(float delta) { // Clear previous frame Gdx.gl.glClearColor(1, 1, 1, 1 ); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); GL30 gl = Gdx.graphics.getGL30(); // gl.glViewport((int) glViewport.x, (int) glViewport.y, (int) glViewport.width, (int) glViewport.height); spriteBatch.setProjectionMatrix(camera.combined); camera.update(); spriteBatch.begin(); // Draw Map this.drawMap(); // spriteBatch.flush(); spriteBatch.end(); } private void drawMap() { for(int a = 0; a < map.getHeight(); a++) { // Bounds check (y) if(camera.position.y + camera.viewportHeight < a)// || camera.position.y - camera.viewportHeight > a) break; for(int b = 0; b < map.getWidth(); b++) { // Bounds check (x) if(camera.position.x + camera.viewportWidth < b)// || camera.position.x > b) break; // Dynamic rendering via BlockManager int id = map.getTileMap()[a][b]; Block block = BlockManager.map.get(id); if(block != null) // Check if Air { block.setPosition(b, a); spriteBatch.draw(block.getTexture(), b, a, 1 ,1); } } } } As you can see, I don't use the viewport anywhere. Not sure if I need it somewhere down the road. So, the map is 16384 blocks wide. One block is 16 pixels in size. One of my naive approaches was this: if(Gdx.input.isButtonPressed(Input.Buttons.LEFT)) { Vector3 mousePos = new Vector3(); mousePos.set(Gdx.input.getX(), Gdx.input.getY(), 0); camera.unproject(mousePos); System.out.println(Math.round(mousePos.x)); // *16); // Debugging // TODO: round // map.getTileMap()[mousePos.x][mousePos.y] = 2; // Draw at mouse position } I confused myself somewhere down the road I fear. What I want to do is, update the "block" (or rather the information in the Map/2D-Array) so that in the next render() there is another block. Basically drawing on the spriteBatch g So if anyone could point me in the right direction this would be highly appreciated. Thanks!

  Read the article

• Workarounds for supporting MVVM in the Silverlight ContextMenu service

  - by cibrax

  As I discussed in my last post, some of the Silverlight controls does not support MVVM quite well out of the box without specific customizations. The Context Menu is another control that requires customizations for enabling data binding on the menu options. There are a few things that you might want to expose as view model for a menu item, such as the Text, the associated icon or the command that needs to be executed. That view model should look like this, public class MenuItemModel { public string Name { get; set; } public ICommand Command { get; set; } public Image Icon { get; set; } public object CommandParameter { get; set; } } This is how you can modify the built-in control to support data binding on the model above, public class CustomContextMenu : ContextMenu { protected override DependencyObject GetContainerForItemOverride() { CustomMenuItem item = new CustomMenuItem(); Binding commandBinding = new Binding("Command"); item.SetBinding(CustomMenuItem.CommandProperty, commandBinding);   Binding commandParameter = new Binding("CommandParameter"); item.SetBinding(CustomMenuItem.CommandParameterProperty, commandParameter);   return item; } }   public class CustomMenuItem : MenuItem { protected override DependencyObject GetContainerForItemOverride() { CustomMenuItem item = new CustomMenuItem();   Binding commandBinding = new Binding("Command"); item.SetBinding(CustomMenuItem.CommandProperty, commandBinding);   return item; } } The change is very similar to the one I made in the TreeView for manually data binding some of the Menu item properties to the model. Once you applied that change in the control, you can define it in your XAML like this. <toolkit:ContextMenuService.ContextMenu> <e:CustomContextMenu ItemsSource="{Binding MenuItems}"> <e:CustomContextMenu.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal" > <ContentPresenter Margin="0 0 4 0" Content="{Binding Icon}" /> <TextBlock Margin="0" Text="{Binding Name, Mode=OneWay}" FontSize="12"/> </StackPanel> </DataTemplate> </e:CustomContextMenu.ItemTemplate> </e:CustomContextMenu> </toolkit:ContextMenuService.ContextMenu> The property MenuItems associated to the “ItemsSource” in the parent model just returns a list of supported options (menu items) in the context menu. this.menuItems = new MenuItemModel[] { new MenuItemModel { Name = "My Command", Command = new RelayCommand(OnCommandClick), Icon = ImageLoader.GetIcon("command.png") } }; The only problem I found so far with this approach is that the context menu service does not support a HierarchicalDataTemplate in case you want to have an hierarchy in the context menu (MenuItem –> Sub menu items), but I guess we can live without that.

  Read the article

• Consumer Oriented Search In Oracle Endeca Information Discovery - Part 2

  - by Bob Zurek

  As discussed in my last blog posting on this topic, Information Discovery, a core capability of the Oracle Endeca Information Discovery solution enables businesses to search, discover and navigate through a wide variety of big data including structured, unstructured and semi-structured data. With search as a core advanced capabilities of our product it is important to understand some of the key differences and capabilities in the underlying data store of Oracle Endeca Information Discovery and that is our Endeca Server. In the last post on this subject, we talked about Exploratory Search capabilities along with support for cascading relevance. Additional search capabilities in the Endeca Server, which differentiate from simple keyword based "search boxes" in other Information Discovery products also include: The Endeca Server Supports Set Search.  The Endeca Server is organized around set retrieval, which means that it looks at groups of results (all the documents that match a search), as well as the relationship of each individual result to the set. Other approaches only compute the relevance of a document by comparing the document to the search query – not by comparing the document to all the others. For example, a search for “U.S.” in another approach might match to the title of a document and get a high ranking. But what if it were a collection of government documents in which “U.S.” appeared in many titles, making that clue less meaningful? A set analysis would reveal this and be used to adjust relevance accordingly. The Endeca Server Supports Second-Order Relvance. Unlike simple search interfaces in traditional BI tools, which provide limited relevance ranking, such as a list of results based on key word matching, Endeca enables users to determine the most salient terms to divide up the result. Determining this second-order relevance is the key to providing effective guidance. Support for Queries and Filters. Search is the most common query type, but hardly complete, and users need to express a wide range of queries. Oracle Endeca Information Discovery also includes navigation, interactive visualizations, analytics, range filters, geospatial filters, and other query types that are more commonly associated with BI tools. Unlike other approaches, these queries operate across structured, semi-structured and unstructured content stored in the Endeca Server. Furthermore, this set is easily extensible because the core engine allows for pluggable features to be added. Like a search engine, queries are answered with a results list, ranked to put the most likely matches first. Unlike “black box” relevance solutions, which generalize one strategy for everyone, we believe that optimal relevance strategies vary across domains. Therefore, it provides line-of-business owners with a set of relevance modules that let them tune the best results based on their content. The Endeca Server query result sets are summarized, which gives users guidance on how to refine and explore further. Summaries include Guided Navigation® (a form of faceted search), maps, charts, graphs, tag clouds, concept clusters, and clarification dialogs. Users don’t explicitly ask for these summaries; Oracle Endeca Information Discovery analytic applications provide the right ones, based on configurable controls and rules. For example, the analytic application might guide a procurement agent filtering for in-stock parts by visualizing the results on a map and calculating their average fulfillment time. Furthermore, the user can interact with summaries and filters without resorting to writing complex SQL queries. The user can simply just click to add filters. Within Oracle Endeca Information Discovery, all parts of the summaries are clickable and searchable. We are living in a search driven society where business users really seem to enjoy entering information into a search box. We do this everyday as consumers and therefore, we have gotten used to looking for that box. However, the key to getting the right results is to guide that user in a way that provides additional Discovery, beyond what they may have anticipated. This is why these important and advanced features of search inside the Endeca Server have been so important. They have helped to guide our great customers to success. 

  Read the article

• Successfully Deliver on State and Local Capital Projects through Project Portfolio Management

  - by Sylvie MacKenzie, PMP

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} While the debate continues on Capitol Hill about which federal programs to cut and which to keep, communities and towns across America are feeling the budget crunch closer to home. State and local governments are trying to save as many projects as they can without promising too much to constituents – and they, in turn, want to know where their tax dollars are going. Fortunately, with the right planning and management, you can deliver successful projects and portfolios on a limited budget. Watch the replay of our recent webcast with Oracle Primavera and Industry Product Manager Garrett Harley that will demonstrate how state and local governments can get the most out of their capital projects and learn how two Oracle Primavera customers have implemented project portfolio management practices to: Predict the cost of long-term capital programs and projects Assess risk and mitigation strategies Collaborate and track performance across government agencies Speakers: Garrett Harley, Industry and Product Manager, Oracle Primavera Cory Davis, Director of Capital Renovation and New Construction, Chicago Public Schools Julie Owen, PSP™, CCC™, Sr. Project Controls Manager,LA Metro Transit Authority With the right planning and management, state and local governments can deliver successful projects on a limited budget. 1024x768 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";}

  Read the article

• Parameterized StreamInsight Queries

  - by Roman Schindlauer

  The changes in our APIs enable a set of scenarios that were either not possible before or could only be achieved through workarounds. One such use case that people ask about frequently is the ability to parameterize a query and instantiate it with different values instead of re-deploying the entire statement. I’ll demonstrate how to do this in StreamInsight 2.1 and combine it with a method of using subjects for dynamic query composition in a mini-series of (at least) two blog articles. Let’s start with something really simple: I want to deploy a windowed aggregate to a StreamInsight server, and later use it with different window sizes. The LINQ statement for such an aggregate is very straightforward and familiar: var result = from win in stream.TumblingWindow(TimeSpan.FromSeconds(5))               select win.Avg(e => e.Value); Obviously, we had to use an existing input stream object as well as a concrete TimeSpan value. If we want to be able to re-use this construct, we can define it as a IQStreamable: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value)); The DefineStreamable API lets us define a function, in our case from a IQStreamable (the input stream) and a TimeSpan (the window length) to an IQStreamable (the result). We can then use it like a function, with the input stream and the window length as parameters: var result = avg(stream, TimeSpan.FromSeconds(5)); Nice, but you might ask: what does this save me, except from writing my own extension method? Well, in addition to defining the IQStreamable function, you can actually deploy it to the server, to make it re-usable by another process! When we deploy an artifact in V2.1, we give it a name: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value))     .Deploy("AverageQuery"); When connected to the same server, we can now use that name to retrieve the IQStreamable and use it with our own parameters: var averageQuery = myApp     .GetStreamable<IQStreamable<SourcePayload>, TimeSpan, double>("AverageQuery"); var result = averageQuery(stream, TimeSpan.FromSeconds(5)); Convenient, isn’t it? Keep in mind that, even though the function “AverageQuery” is deployed to the server, its logic will still be instantiated into each process when the process is created. The advantage here is being able to deploy that function, so another client who wants to use it doesn’t need to ask the author for the code or assembly, but just needs to know the name of deployed entity. A few words on the function signature of GetStreamable: the last type parameter (here: double) is the payload type of the result, not the actual result stream’s type itself. The returned object is a function from IQStreamable<SourcePayload> and TimeSpan to IQStreamable<double>. In the next article we will integrate this usage of IQStreamables with Subjects in StreamInsight, so stay tuned! Regards, The StreamInsight Team

  Read the article

• Pro/con of using Angular directives for complex form validation/ GUI manipulation

  - by tengen

  I am building a new SPA front end to replace an existing enterprise's legacy hodgepodge of systems that are outdated and in need of updating. I am new to angular, and wanted to see if the community could give me some perspective. I'll state my problem, and then ask my question. I have to generate several series of check boxes based on data from a .js include, with data like this: $scope.fieldMappings.investmentObjectiveMap = [ {'id':"CAPITAL PRESERVATION", 'name':"Capital Preservation"}, {'id':"STABLE", 'name':"Moderate"}, {'id':"BALANCED", 'name':"Moderate Growth"}, // etc {'id':"NONE", 'name':"None"} ]; The checkboxes are created using an ng-repeat, like this: <div ng-repeat="investmentObjective in fieldMappings.investmentObjectiveMap"> ... </div> However, I needed the values represented by the checkboxes to map to a different model (not just 2-way-bound to the fieldmappings object). To accomplish this, I created a directive, which accepts a destination array destarray which is eventually mapped to the model. I also know I need to handle some very specific gui controls, such as unchecking "None" if anything else gets checked, or checking "None" if everything else gets unchecked. Also, "None" won't be an option in every group of checkboxes, so the directive needs to be generic enough to accept a validation function that can fiddle with the checked state of the checkbox group's inputs based on what's already clicked, but smart enough not to break if there is no option called "NONE". I started to do that by adding an ng-click which invoked a function in the controller, but in looking around Stack Overflow, I read people saying that its bad to put DOM manipulation code inside your controller - it should go in directives. So do I need another directive? So far: (html): <input my-checkbox-group type="checkbox" fieldobj="investmentObjective" ng-click="validationfunc()" validationfunc="clearOnNone()" destarray="investor.investmentObjective" /> Directive code: .directive("myCheckboxGroup", function () { return { restrict: "A", scope: { destarray: "=", // the source of all the checkbox values fieldobj: "=", // the array the values came from validationfunc: "&" // the function to be called for validation (optional) }, link: function (scope, elem, attrs) { if (scope.destarray.indexOf(scope.fieldobj.id) !== -1) { elem[0].checked = true; } elem.bind('click', function () { var index = scope.destarray.indexOf(scope.fieldobj.id); if (elem[0].checked) { if (index === -1) { scope.destarray.push(scope.fieldobj.id); } } else { if (index !== -1) { scope.destarray.splice(index, 1); } } }); } }; }) .js controller snippet: .controller( 'SuitabilityCtrl', ['$scope', function ( $scope ) { $scope.clearOnNone = function() { // naughty jQuery DOM manipulation code that // looks at checkboxes and checks/unchecks as needed }; The above code is done and works fine, except the naughty jquery code in clearOnNone(), which is why I wrote this question. And here is my question: after ALL this, I think to myself - I could be done already if I just manually handled all this GUI logic and validation junk with jQuery written in my controller. At what point does it become foolish to write these complicated directives that future developers will have to puzzle over more than if I had just written jQuery code that 99% of us would understand with a glance? How do other developers draw the line? I see this all over Stack Overflow. For example, this question seems like it could be answered with a dozen lines of straightforward jQuery, yet he has opted to do it the angular way, with a directive and a partial... it seems like a lot of work for a simple problem. Specifically, I suppose I would like to know: how SHOULD I be writing the code that checks whether "None" has been selected (if it exists as an option in this group of checkboxes), and then check/uncheck the other boxes accordingly? A more complex directive? I can't believe I'm the only developer that is having to implement code that is more complex than needed just to satisfy an opinionated framework.

  Read the article

• Security Access Control With Solaris Virtualization

  - by Thierry Manfe-Oracle

  Numerous Solaris customers consolidate multiple applications or servers on a single platform. The resulting configuration consists of many environments hosted on a single infrastructure and security constraints sometimes exist between these environments. Recently, a customer consolidated many virtual machines belonging to both their Intranet and Extranet on a pair of SPARC Solaris servers interconnected through Infiniband. Virtual Machines were mapped to Solaris Zones and one security constraint was to prevent SSH connections between the Intranet and the Extranet. This case study gives us the opportunity to understand how the Oracle Solaris Network Virtualization Technology —a.k.a. Project Crossbow— can be used to control outbound traffic from Solaris Zones. Solaris Zones from both the Intranet and Extranet use an Infiniband network to access a ZFS Storage Appliance that exports NFS shares. Solaris global zones on both SPARC servers mount iSCSI LU exported by the Storage Appliance.  Non-global zones are installed on these iSCSI LU. With no security hardening, if an Extranet zone gets compromised, the attacker could try to use the Storage Appliance as a gateway to the Intranet zones, or even worse, to the global zones as all the zones are reachable from this node. One solution consists in using Solaris Network Virtualization Technology to stop outbound SSH traffic from the Solaris Zones. The virtualized network stack provides per-network link flows. A flow classifies network traffic on a specific link. As an example, on the network link used by a Solaris Zone to connect to the Infiniband, a flow can be created for TCP traffic on port 22, thereby a flow for the ssh traffic. A bandwidth can be specified for that flow and, if set to zero, the traffic is blocked. Last but not least, flows are created from the global zone, which means that even with root privileges in a Solaris zone an attacker cannot disable or delete a flow. With the flow approach, the outbound traffic of a Solaris zone is controlled from outside the zone. Schema 1 describes the new network setting once the security has been put in place. Here are the instructions to create a Crossbow flow as used in Schema 1 : (GZ)# zoneadm -z zonename halt ...halts the Solaris Zone. (GZ)# flowadm add-flow -l iblink -a transport=TCP,remote_port=22 -p maxbw=0 sshFilter  ...creates a flow on the IB partition "iblink" used by the zone to connect to the Infiniband.  This IB partition can be identified by intersecting the output of the commands 'zonecfg -z zonename info net' and 'dladm show-part'.  The flow is created on port 22, for the TCP traffic with a zero maximum bandwidth.  The name given to the flow is "sshFilter". (GZ)# zoneadm -z zonename boot  ...restarts the Solaris zone now that the flow is in place.Solaris Zones and Solaris Network Virtualization enable SSH access control on Infiniband (and on Ethernet) without the extra cost of a firewall. With this approach, no change is required on the Infiniband switch. All the security enforcements are put in place at the Solaris level, minimizing the impact on the overall infrastructure. The Crossbow flows come in addition to many other security controls available with Oracle Solaris such as IPFilter and Role Based Access Control, and that can be used to tackle security challenges.

  Read the article

• Cream of the Crop

  - by KemButller

  JD Edwards has been working hard to ensure that you shouldn't have to work so hard! Yet there are still JD Edwards customers that may not be up to speed on all the new and or improved tools and utilities we have delivered, all designed to make your life easier. So today, I want to share what I consider to be the cream of the crop….those items that every customer should know about and leverage to make ERP life just a little bit (or A LOT) easier! These are my top picks, the cream of a very good crop! Explore and enjoy, and gain some of your time back to do with as you please. · www.runjde.com It’s where to go when you need to know! The Resource Kits available on www.runjde.com provide comprehensive Resource Kits (guides) by user type. The guides provide brief descriptions of the wide array of resources that are available to JD Edwards’s eco system and links to each of those resources. · My Oracle Support (MOS) Information Centers This link will take you to an index that is designed to provide you with simple and quick navigation to the available EnterpriseOne Information Centers. This index provides links to: · EnterpriseOne Application specific Information Centers · EnterpriseOne Tools and Technology Information Centers · EnterpriseOne Performance Information Center · EnterpriseOne 9.1 and 9.0 Information Centers Information Centers give Oracle the ability to aggregate content for a given focus area and present this content in categories for easy browsing by our customers. Information Centers offer a variety of focused dynamic content organized around one or more of the following tasks. · Overview · Use · Troubleshooting · Patching and Maintenance · Install and Configure · Upgrade · Optimize Performance · Security · Certify JD Edwards Newsletters Be in the know by reading the Global Customer Support Product Newsletters. They are PACKED with news and information covering a wide range of topics and news. It is a must read if you want to know what’s happening in the JD Edwards universe! Read the latest EntepriseOne newsletter Read the latest World newsletter Learn How to receive notification when a new newsletter edition is published Oracle Learning Library – (OLL) Oracle Learn Library is the place to go for easy access to JD Edwards Application and Tools training. For a comprehensive view of the training available for a specific product/functional area, explore the Knowledge Paths For Net Change (new feature) training, explore the TOI sessions (TOI stands for Transfer Of Information). Tip: Be sure to experiment with the search filters! · www.upgradejde.com The site designed to help customers and partners with the process of upgrading JD Edwards. The site is a wealth of information, tools and resources designed to assist in the evaluation, planning and execution steps required when upgrading. Of note is the wildly successful upgrade strategy known as “The Art of the Possible” wherein JD Edwards and many of our partners hold free workshops to teach customers how to conduct upgrades in 100 days or less. Equally important is the fact that on www.upgradejde.com, customers can gain visibility into planned enhancements using the Product and Technology Feature Catalogs. The catalogs are great for creating customer specific reports about the net change between older releases and current or planned releases. Examples of other key resources on www.upgradejde.com are the product data base changes between releases, extensibility guides, (formerly known as programmer’s guides), whitepapers, ROI calculators and much more!

  Read the article

• PHP-FPM stops responding and dies [migrated]

  - by user12361

  I'm running Drupal 6 with Nginx 1.5.1 and PHP-FPM (PHP 5.3.26) on a 1GB single core VPS with 3GB of swap space on SSD storage. I just switched from shared hosting to this unmanaged VPS because my site was getting too heavy, so I'm still learning the ropes. I have moderately high traffic, I don't really monitor it closely but Google Adsense usually record close to 30K page views/day. I usually have 50 to 80 authenticated users logged in and a few hundred more anonymous users hitting the Boost static HTML cache at any given moment. The problem I'm having is that PHP-FPM frequently stops responding, resulting in Nginx 502 or 504 errors. I swear I have read every page on the internet about this issue, which seems fairly common, and I've tried endless combinations of configurations, and I can't find a good solution. After restarting Nginx and PHP-FPM, the site runs really fast for a while, and then without warning it simply stops responding. I get a white screen while the browser waits on the server, and after about 30 seconds to a minute it throws an Nginx 502 or 504 error. Sometimes it runs well for 2 minutes, sometimes 5 minutes, sometimes 5 hours, but it always ends up hanging. When I find the server in this state, there is still plenty of free memory (500MB or more) and no major CPU usage, the control and worker PHP-FPM processes are still present, and the server is still pingable and usable via SSH. A reload of PHP-FPM via the init script revives it again. The hangups don't seem to correspond to the amount of traffic, because I observed this behavior consistently when I was testing this configuration on a development VPS with no traffic at all. I've been constantly tweaking the settings, but I can't definitively eliminate the problem. I set Nginx workers to just 1. In the PHP-FPM config I have tried all three of the process managers. "Dynamic" is definitely the least reliable, consistently hanging up after only a few minutes. "Static" also has been unreliable and unpredictable. The least buggy has been "ondemand", but even that is failing me, sometimes after as much as 12 to 24 hours. But I can't leave the server unattended because PHP-FPM dies and never comes back on its own. I tried adjusting the pm.max_children value from as low as 3 to as high as 50, doesn't make a lot of difference, but I currently have it at 10. Same thing for the spare servers values. I also have set pm.max_requests anywhere from 30 to unlimited, and it doesn't seem to make a difference. According to the logs, the PHP-FPM processes are not exiting with SIGSEGV or SIGBUS, but rather with SIGTERM. I get a lot of lines like: WARNING: [pool www] child 3739, script '/var/www/drupal6/index.php' (request: "GET /index.php") execution timed out (38.739494 sec), terminating and: WARNING: [pool www] child 3738 exited on signal 15 (SIGTERM) after 50.004380 seconds from start I actually found several articles that recommend doing a graceful reload of PHP-FPM via cron every few minutes or hours to circumvent this issue. So that's what I did, "/etc/init.d/php-fpm reload" every 5 minutes. So far, it's keeping the lights on. But it feels like a dreadful hack. Is PHP-FPM really that unreliable? Is there anything else I can do? Thanks a lot!

  Read the article

• Creating a voxel world with 3D arrays using threads

  - by Sean M.

  I am making a voxel game (a bit like Minecraft) in C++(11), and I've come across an issue with creating a world efficiently. In my program, I have a World class, which holds a 3D array of Region class pointers. When I initialize the world, I give it a width, height, and depth so it knows how large of a world to create. Each Region is split up into a 32x32x32 area of blocks, so as you may guess, it takes a while to initialize the world once the world gets to be above 8x4x8 Regions. In order to alleviate this issue, I thought that using threads to generate different levels of the world concurrently would make it go faster. Having not used threads much before this, and being still relatively new to C++, I'm not entirely sure how to go about implementing one thread per level (level being a xz plane with a height of 1), when there is a variable number of levels. I tried this: for(int i = 0; i < height; i++) { std::thread th(std::bind(&World::load, this, width, height, depth)); th.join(); } Where load() just loads all Regions at height "height". But that executes the threads one at a time (which makes sense, looking back), and that of course takes as long as generating all Regions in one loop. I then tried: std::thread t1(std::bind(&World::load, this, w, h1, h2 - 1, d)); std::thread t2(std::bind(&World::load, this, w, h2, h3 - 1, d)); std::thread t3(std::bind(&World::load, this, w, h3, h4 - 1, d)); std::thread t4(std::bind(&World::load, this, w, h4, h - 1, d)); t1.join(); t2.join(); t3.join(); t4.join(); This works in that the world loads about 3-3.5 times faster, but this forces the height to be a multiple of 4, and it also gives the same exact VAO object to every single Region, which need individual VAOs in order to render properly. The VAO of each Region is set in the constructor, so I'm assuming that somehow the VAO number is not thread safe or something (again, unfamiliar with threads). So basically, my question is two one-part: How to I implement a variable number of threads that all execute at the same time, and force the main thread to wait for them using join() without stopping the other threads? How do I make the VAO objects thread safe, so when a bunch of Regions are being created at the same time across multiple threads, they don't all get the exact same VAO? Turns out it has to do with GL contexts not working across multiple threads. I moved the VAO/VBO creation back to the main thread. Fixed! Here is the code for block.h/.cpp, region.h/.cpp, and CVBObject.h/.cpp which controls VBOs and VAOs, in case you need it. If you need to see anything else just ask. EDIT: Also, I'd prefer not to have answers that are like "you should have used boost". I'm trying to do this without boost to get used to threads before moving onto other libraries.

  Read the article

• Profiling Startup Of VS2012 &ndash; JustTrace Profiler

  - by Alois Kraus

  JustTrace is made by Telerik which is mainly known for its collection of UI controls. The current version (2012.3.1127.0) does include a performance and memory profiler which does cost 614€ and is currently with a special offer for 306€ on sale. It does include one year of free upgrades. The uneven € numbers are calculated from the 799€ and 50% dicsount price. The UI is already in Metro style and simple to use. Multi process, attach, method recording filter are not supported. It looks like JustTrace is like Ants a Just My Code profiler. For stuff where you do not have the pdbs or you want to dig deeper into the BCL code you will not get far. After getting the profile data you get in the All Methods grid a plain list with hit count and own time. The method list for all methods is also suspiciously short which is a clear sign that you will not get far during the analysis of foreign code. But at least there is also a memory profiler included. For this I have to choose in the first window for Profiling Type “Memory Profiler” to check the memory consumption of VS.  There are some interesting number to see but I do really miss from YourKit the thread stack window. How am I supposed to get a clue when much memory is allocated and the CPU consumption is high in which places I should look? The Snapshot summary gives a rough overview which is ok for a first impression. Next is Assemblies? This gives you a list of all loaded assemblies. Not terribly useful.   The By Type view gives you exactly what it is supposed to do. You have to keep in mind that this list is filtered by the types you did check in the Assemblies list. The By Type instance list does only show types from assemblies which do not originate from Microsoft. By default mscorlib and System are not checked. That is the reason why for the first time my By Type window looked like The idea behind this feature is to show only your instances because you are ultimately responsible for the overall memory consumption. I am not sure if I do like this feature because by default it does hide too much. I do want to see at least how many strings and arrays are allocated. A simple namespace filter would also do it in my opinion. Now you can examine all string instances and look who in the object graph does keep a reference on them. That is nice but YourKit has the big plus that you can also look into the string contents.  I am also not sure how in the graph cycles are visualized and what will happen if you have thousands of objects referencing you. That's pretty much it about JustTrace. It can help the average developer to pinpoint performance and memory issues by just looking at his own code and instances. Showing them more will not help them because the sheer amount of information will overwhelm them. And you need to have a pretty good understanding how the GC and the CLR does work. When you have a performance issue at a customer machine it is sometimes very helpful to be able a bring a profiler onto the machine (no pdbs, …) and to get a full snapshot of all processes which are in the problematic use case involved. For these more advanced use cased JustTrace is certainly the wrong tool. Next: SpeedTrace

  Read the article

• "The connection has timed out" - Please help!

  - by gon

  I recently installed a fresh Ubuntu 12.04 LTS on a desktop, and the installation itself was successful (other than 'grub rescue' issue that I encountered but fixed) but this connection problem is really giving me a headache. Symptoms: 1. When I open the FireFox browser and try to connect to a website, it just hangs for a while saying "Connecting..." but eventually loads an error page "The connection has timed out". 2. It's not a browser problem (and I tried setting ipv6 thing to "true" at about:config) because running "sudo apt-get install [some-random-package]" at terminal fails ("E: Unable to locate package [package]") too. All other operations that need internet access are not working. 3. I certainly see a wired network (called "eth1") at the Network Manager, and it says "Connection Established" after disconnecting and then connecting again. I have tried almost everything that could be found from google search results still no luck. Their problems slightly differ from mine or the solutions just don't work. By the way it didn't have internet access when installing Ubuntu 12.04. (I ignored the message that I need internet to install Ubuntu) Could this be a problem? I'm sorry I don't remember if internet worked or not on the previous version of Ubuntu. :( I would really appreciate your help... I don't even know what more to do if this fails too.. Thanks!! Thanks for your comment. Here is the result of ifconfig: eth0 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b9 inet addr:10.10.65.185 Bcast:10.10.65.255 Mask:255.255.255.0 inet6 addr: fe80::7aac:c0ff:fe3d:b2b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3907 errors:0 dropped:0 overruns:0 frame:0 TX packets:771 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:393118 (393.1 KB) TX bytes:73472 (73.4 KB) Interrupt:16 eth1 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204 (204.0 B) TX bytes:204 (204.0 B) route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.10.65.1 0.0.0.0 UG 0 0 0 eth0 10.10.65.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 /etc/resolv.conf: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 8.8.8.8 nameserver 8.8.4.4 nameserver 10.81.1.8 nameserver 10.1.2.10 nameserver 127.0.0.1 search yamatake.local /etc/network/interfaces: auto lo iface lo inet loopback #auto eth0 #iface eth0 inet dhcp #auto eth1 #iface eth1 inet dhcp And I'll also include the result of 'sudo lshw -C network' in case it might help: *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 78:ac:c0:3d:b2:b9 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 ip=10.10.65.185 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:93 memory:fc000000-fc00ffff *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth1 version: 10 serial: 78:ac:c0:3d:b2:b8 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 latency=0 link=no multicast=yes port=twisted pair speed=100Mbit/s resources: irq:94 memory:fb000000-fb00ffff

  Read the article

• Faster Memory Allocation Using vmtasks

  - by Steve Sistare

  You may have noticed a new system process called "vmtasks" on Solaris 11 systems: % pgrep vmtasks 8 % prstat -p 8 PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP 8 root 0K 0K sleep 99 -20 9:10:59 0.0% vmtasks/32 What is vmtasks, and why should you care? In a nutshell, vmtasks accelerates creation, locking, and destruction of pages in shared memory segments. This is particularly helpful for locked memory, as creating a page of physical memory is much more expensive than creating a page of virtual memory. For example, an ISM segment (shmflag & SHM_SHARE_MMU) is locked in memory on the first shmat() call, and a DISM segment (shmflg & SHM_PAGEABLE) is locked using mlock() or memcntl(). Segment operations such as creation and locking are typically single threaded, performed by the thread making the system call. In many applications, the size of a shared memory segment is a large fraction of total physical memory, and the single-threaded initialization is a scalability bottleneck which increases application startup time. To break the bottleneck, we apply parallel processing, harnessing the power of the additional CPUs that are always present on modern platforms. For sufficiently large segments, as many of 16 threads of vmtasks are employed to assist an application thread during creation, locking, and destruction operations. The segment is implicitly divided at page boundaries, and each thread is given a chunk of pages to process. The per-page processing time can vary, so for dynamic load balancing, the number of chunks is greater than the number of threads, and threads grab chunks dynamically as they finish their work. Because the threads modify a single application address space in compressed time interval, contention on locks protecting VM data structures locks was a problem, and we had to re-scale a number of VM locks to get good parallel efficiency. The vmtasks process has 1 thread per CPU and may accelerate multiple segment operations simultaneously, but each operation gets at most 16 helper threads to avoid monopolizing CPU resources. We may reconsider this limit in the future. Acceleration using vmtasks is enabled out of the box, with no tuning required, and works for all Solaris platform architectures (SPARC sun4u, SPARC sun4v, x86). The following tables show the time to create + lock + destroy a large segment, normalized as milliseconds per gigabyte, before and after the introduction of vmtasks: ISM system ncpu before after speedup ------ ---- ------ ----- ------- x4600 32 1386 245 6X X7560 64 1016 153 7X M9000 512 1196 206 6X T5240 128 2506 234 11X T4-2 128 1197 107 11x DISM system ncpu before after speedup ------ ---- ------ ----- ------- x4600 32 1582 265 6X X7560 64 1116 158 7X M9000 512 1165 152 8X T5240 128 2796 198 14X (I am missing the data for T4 DISM, for no good reason; it works fine). The following table separates the creation and destruction times: ISM, T4-2 before after ------ ----- create 702 64 destroy 495 43 To put this in perspective, consider creating a 512 GB ISM segment on T4-2. Creating the segment would take 6 minutes with the old code, and only 33 seconds with the new. If this is your Oracle SGA, you save over 5 minutes when starting the database, and you also save when shutting it down prior to a restart. Those minutes go directly to your bottom line for service availability.

  Read the article

• Criminals and Other Illegal Characters

  - by Most Valuable Yak (Rob Volk)

  SQLTeam's favorite Slovenian blogger Mladen (b | t) had an interesting question on Twitter: http://www.twitter.com/MladenPrajdic/status/347057950470307841 I liked Kendal Van Dyke's (b | t) reply: http://twitter.com/SQLDBA/status/347058908801667072 And he was right!  This is one of those pretty-useless-but-sounds-interesting propositions that I've based all my presentations on, and most of my blog posts. If you read all the replies you'll see a lot of good suggestions.  I particularly like Aaron Bertrand's (b | t) idea of going into the Unicode character set, since there are over 65,000 characters available.  But how to find an illegal character?  Detective work? I'm working on the premise that if SQL Server will reject it as a name it would throw an error.  So all we have to do is generate all Unicode characters, rename a database with that character, and catch any errors. It turns out that dynamic SQL can lend a hand here: IF DB_ID(N'a') IS NULL CREATE DATABASE [a]; DECLARE @c INT=1, @sql NVARCHAR(MAX)=N'', @err NVARCHAR(MAX)=N''; WHILE @c<65536 BEGIN BEGIN TRY SET @sql=N'alter database ' + QUOTENAME(CASE WHEN @c=1 THEN N'a' ELSE NCHAR(@c-1) END) + N' modify name=' + QUOTENAME(NCHAR(@c)); RAISERROR(N'*** Trying %d',10,1,@c) WITH NOWAIT; EXEC(@sql); SET @c+=1; END TRY BEGIN CATCH SET @err=ERROR_MESSAGE(); RAISERROR(N'Ooops - %d - %s',10,1,@c,@err) WITH NOWAIT; BREAK; END CATCH END SET @sql=N'alter database ' + QUOTENAME(NCHAR(@c-1)) + N' modify name=[a]'; EXEC(@sql); The script creates a dummy database "a" if it doesn't already exist, and only tests single characters as a database name.  If you have databases with single character names then you shouldn't run this on that server. It takes a few minutes to run, but if you do you'll see that no errors are thrown for any of the characters.  It seems that SQL Server will accept any character, no matter where they're from.  (Well, there's one, but I won't tell you which. Actually there's 2, but one of them requires some deep existential thinking.) The output is also interesting, as quite a few codes do some weird things there.  I'm pretty sure it's due to the font used in SSMS for the messages output window, not all characters are available.  If you run it using the SQLCMD utility, and use the -o switch to output to a file, and -u for Unicode output, you can open the file in Notepad or another text editor and see the whole thing. I'm not sure what character I'd recommend to answer Mladen's question.  I think the standard tab (ASCII 9) is fine.  There's also several specific separator characters in the original ASCII character set (decimal 28-31). But of all the choices available in Unicode whitespace, I think my favorite would be the Mongolian Vowel Separator.  Or maybe the zero-width space. (that'll be fun to print!)  And since this is Mladen we're talking about, here's a good selection of "intriguing" characters he could use.

  Read the article

• Why RenderTarget2D overwrites other objects when trying to put some text in a model?

  - by cad

  I am trying to draw an object composited by two cubes (A & B) (one on top of the other, but for now I have them a little bit more open). I am able to do it and this is the result. (Cube A is the blue and Cube B is the one with brown text that comes from a png texture) But I want to have any text as parameter in the cube B. I have tried what @alecnash suggested in his question, but for some reason when I try to draw cube B, cube A dissapears and everything turns purple. This is my draw code: public void Draw(GraphicsDevice graphicsDevice, SpriteBatch spriteBatch, Matrix viewMatrix, Matrix projectionMatrix) { graphicsDevice.BlendState = BlendState.Opaque; graphicsDevice.DepthStencilState = DepthStencilState.Default; graphicsDevice.RasterizerState = RasterizerState.CullCounterClockwise; graphicsDevice.SamplerStates[0] = SamplerState.LinearClamp; // CUBE A basicEffect.View = viewMatrix; basicEffect.Projection = projectionMatrix; basicEffect.World = Matrix.CreateTranslation(ModelPosition); basicEffect.VertexColorEnabled = true; foreach (EffectPass pass in basicEffect.CurrentTechnique.Passes) { pass.Apply(); drawCUBE_TOP(graphicsDevice); drawCUBE_Floor(graphicsDevice); DrawFullSquareStripesFront(graphicsDevice, _numStrips, Color.Red, Color.Blue, _levelPercentage); DrawFullSquareStripesLeft(graphicsDevice, _numStrips, Color.Red, Color.Blue, _levelPercentage); DrawFullSquareStripesRight(graphicsDevice, _numStrips, Color.Red, Color.Blue, _levelPercentage); DrawFullSquareStripesBack(graphicsDevice, _numStrips, Color.Red, Color.Blue, _levelPercentage); } // CUBE B // Set the World matrix which defines the position of the cube texturedCubeEffect.World = Matrix.CreateTranslation(ModelPosition); // Set the View matrix which defines the camera and what it's looking at texturedCubeEffect.View = viewMatrix; // Set the Projection matrix which defines how we see the scene (Field of view) texturedCubeEffect.Projection = projectionMatrix; // Enable textures on the Cube Effect. this is necessary to texture the model texturedCubeEffect.TextureEnabled = true; Texture2D a = SpriteFontTextToTexture(graphicsDevice, spriteBatch, arialFont, "TEST ", Color.Black, Color.GhostWhite); texturedCubeEffect.Texture = a; //texturedCubeEffect.Texture = cubeTexture; // Enable some pretty lights texturedCubeEffect.EnableDefaultLighting(); // apply the effect and render the cube foreach (EffectPass pass in texturedCubeEffect.CurrentTechnique.Passes) { pass.Apply(); cubeToDraw.RenderToDevice(graphicsDevice); } } private Texture2D SpriteFontTextToTexture(GraphicsDevice graphicsDevice, SpriteBatch spriteBatch, SpriteFont font, string text, Color backgroundColor, Color textColor) { Vector2 Size = font.MeasureString(text); RenderTarget2D renderTarget = new RenderTarget2D(graphicsDevice, (int)Size.X, (int)Size.Y); graphicsDevice.SetRenderTarget(renderTarget); graphicsDevice.Clear(Color.Transparent); spriteBatch.Begin(); //have to redo the ColorTexture //spriteBatch.Draw(ColorTexture.Create(graphicsDevice, 1024, 1024, backgroundColor), Vector2.Zero, Color.White); spriteBatch.DrawString(font, text, Vector2.Zero, textColor); spriteBatch.End(); graphicsDevice.SetRenderTarget(null); return renderTarget; } The way I generate texture with dynamic text is: Texture2D a = SpriteFontTextToTexture(graphicsDevice, spriteBatch, arialFont, "TEST ", Color.Black, Color.GhostWhite); After commenting several parts to see what caused the problem, it seems to be located in this line graphicsDevice.SetRenderTarget(renderTarget);

  Read the article

• DirectX particle system. ConstantBuffer

  - by Liuka

  I'm new in DirectX and I'm making a 2D game. I want to use a particle system to simulate a 3D starfield, so each star has to set its own constant buffer for the vertexshader es. to set it's world matrix. So if i have 500 stars (that move every frame) i need to call 500 times VSsetconstantbuffer, and map/unmap each buffer. with 500 stars i have an average of 220 fps and that's quite good. My bottelneck is Vs/PsSetconstantbuffer. If i dont call this function i have 400 fps(obliviously nothing is display, since i dont set the position of the stars). So is there a method to speed up the render of the particle system?? Ps. I'm using intel integrate graphic (hd 2000-3000). with a nvidia (or amd) gpu will i have the same bottleneck?? If, for example, i dont call setshaderresource i have 10-20 fps more (for 500 objcets), that is not 180.Why does SetConstantBuffer take so long?? LPVOID VSdataPtr = VSmappedResource.pData; memcpy(VSdataPtr, VSdata, CszVSdata); context->Unmap(VertexBuffer, 0); result = context->Map(PixelBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &PSmappedResource); if (FAILED(result)) { outputResult.OutputErrorMessage(TITLE, L"Cannot map the PixelBuffer", &result, OUTPUT_ERROR_FILE); return; } LPVOID PSdataPtr = PSmappedResource.pData; memcpy(PSdataPtr, PSdata, CszPSdata); context->Unmap(PixelBuffer, 0); context->VSSetConstantBuffers(0, 1, &VertexBuffer); context->PSSetConstantBuffers(0, 1, &PixelBuffer); this update and set the buffer. It's part of the render method of a sprite class that contains a the vertex buffer and the texture to apply to the quads(it's a 2d game) too. I have an array of 500 stars (sprite setup with a star texture). Every frame: clear back buffer; draw the array of stars; present the backbuffer; draw also call the function update( which calculate the position of the sprite on screen based on a "camera class") Ok, create a vertex buffer with the vertices of each quads(stars) seems to be good, since the stars don't change their "virtual" position; so.... In a particle system (where particles move) it's better to have all the object in only one vertices array, rather then an array of different sprite/object in order to update all the vertices' position with a single setbuffer call. In this case i have to use a dynamic vertex buffer with the vertices positions like this: verticesForQuad={{ XMFLOAT3((float)halfDImensions.x-1+pos.x, (float)halfDImensions.y-1+pos.y, 1.0f), XMFLOAT2(1.0f, 0.0f) }, { XMFLOAT3((float)halfDImensions.x-1+pos.x, -(float)halfDImensions.y-1+pos.y, 1.0f), XMFLOAT2(1.0f, 1.0f) }, { XMFLOAT3(-(float)halfDImensions.x-1+pos.x, (float)halfDImensions.y-1.pos.y, 1.0f), XMFLOAT2(0.0f, 0.0f) }, { XMFLOAT3(-(float)halfDImensions.x-1.pos.x, -(float)halfDImensions.y-1+pos.y, 1.0f), XMFLOAT2(0.0f, 1.0f) }, ....other quads} where halfDimensions is the halfsize in pixel of a texture and pos the virtual position of a star. than create an array of verticesForQuad and create the vertex buffer ZeroMemory(&vertexDesc, sizeof(vertexDesc)); vertexDesc.Usage = D3D11_USAGE_DEFAULT; vertexDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER; vertexDesc.ByteWidth = sizeof(VertexType)* 4*numStars; ZeroMemory(&resourceData, sizeof(resourceData)); resourceData.pSysMem = verticesForQuad; result = device->CreateBuffer(&vertexDesc, &resourceData, &CvertexBuffer); and call each frame Context->IASetVertexBuffers(0, 1, &CvertexBuffer, &stride, &offset); But if i want to add and remove obj i have to recreate the buffer each time, havent i?? There is a faster way? I think i can create a vertex buffer with a max size (es. 10000 objs) and when i update it set only the 250 position (for 250 onjs for example) and pass this number as the vertexCount to the draw function (numObjs*4), or i'm worng

  Read the article

• Cloud Fact for Business Managers #3: Where You Data Is, and Who Has Access to It Might Surprise You

  - by yaldahhakim

  Written by: David Krauss While data security and operational risk conversations usually happen around the desk of a CCO/CSO (chief compliance and/or security officer), or perhaps the CFO, since business managers are now selecting cloud providers, they need to be able to at least ask some high-level questions on the topic of risk and compliance.  While the report found that 76% of adopters were motivated to adopt cloud apps because of quick access to software, most of these managers found that after they made a purchase decision their access to exciting new capabilities in the cloud could be hindered due to performance and scalability constraints put forth  by their cloud provider.  If you are going to let your business consume their mission critical business applications as a service, then it’s important to understand who is providing those cloud services and what kind of performance you are going to get.  Different types of departments, companies and industries will all have unique requirements so it’s key to take this also into consideration.   Nothing puts a CEO in a bad mood like a public data breach or finding out the company lost money when customers couldn’t buy a product or service because your cloud service provider had a problem.  With 42% of business managers having seen a data security breach in their department associated directly with the use of cloud applications, this is happening more than you think.   We’ve talked about the importance of being able to avoid information silos through a unified cloud approach and platform.  This is also important when keeping your data safe and secure, and a key conversation to have with your cloud provider.  Your customers want to know that their information is protected when they do business with you, just like you want your own company information protected.   This is really hard to do when each line of business is running different cloud application services managed by different cloud providers, all with different processes and controls.   It only adds to the complexity, and the more complex, the more risky and the chance that something will go wrong. What about compliance? Depending on the cloud provider, it can be difficult at best to understand who has access to your data, and were your data is actually stored.  Add to this multiple cloud providers spanning multiple departments and it becomes very problematic when trying to comply with certain industry and country data security regulations.  With 73% of business managers complaining that having cloud data handled externally by one or more cloud vendors makes it hard for their department to be compliant, this is a big time suck for executives and it puts the organization at risk. Is There A Complete, Integrated, Modern Cloud Out there for Business Executives?If you are a business manager looking to drive faster innovation for your business and want a cloud application that your CIO would approve of, I would encourage you take a look at Oracle Cloud.  It’s everything you want from a SaaS based application, but without compromising on functionality and other modern capabilities like embedded business intelligence, social relationship management (for your entire business), and advanced mobile.  And because Oracle Cloud is built and managed by Oracle, you can be confident that your cloud application services are enterprise-grade.  Over 25 Million users and 10 thousands companies around the globe rely on Oracle Cloud application services everyday – maybe your business should too.  For more information, visit cloud.oracle.com. Additional Resources •    Try it: cloud.oracle.com•    Learn more: http://www.oracle.com/us/corporate/features/complete-cloud/index.html•    Research Report: Cloud for Business Managers: The Good, the Bad, and the Ugly

  Read the article

• EPPM Is a Must-Have Capability as Global Energy and Power Industries Eye US$38 Trillion in New Investments

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} “The process manufacturing industry is facing an unprecedented challenge: from now until 2035, cumulative worldwide investments of US$38 trillion will be required for drilling, power generation, and other energy projects,” Iain Graham, director of energy and process manufacturing for Oracle’s Primavera, said in a recent webcast. He adds that process manufacturing organizations such as oil and gas, utilities, and chemicals must manage this level of investment in an environment of constrained capital markets, erratic supply and demand, aging infrastructure, heightened regulations, and declining global skills. In the following interview, Graham explains how the right enterprise project portfolio management (EPPM) technology can help the industry meet these imperatives. Q: Why is EPPM so important for today’s process manufacturers? A: If the industry invests US$38 trillion without proper cost controls in place, a huge amount of resources will be put at risk, especially when it comes to cost overruns that may occur in large capital projects. Process manufacturing companies must not only control costs, but also monitor all the various contractors that will be involved in each project. If you’re not managing your own workers and all the interdependencies among the different contractors, then you’ve got problems. Q: What else should process manufacturers look for? A: It’s also important that an EPPM solution has the ability to manage more than just capital projects. For example, it’s best to manage maintenance and capital projects in the same system. Say you’re due to install a new transformer in a power station as part of a capital project, but routine maintenance in that area of the facility is scheduled for that morning. The lack of coordination could lead to unforeseen delays. There are also IT considerations that impact capital projects, such as adding servers and network cable for a control system in a power station. What organizations need is a true EPPM system that’s not just for capital projects, maintenance, or IT activities, but instead an enterprisewide solution that provides visibility into all types of projects. Read the complete Q&A here and discover the practical framework for successfully managing this massive capital spending.

  Read the article

• ORA-4031 Troubleshooting Tool ???

  - by Takeyoshi Sasaki

  ORA-4031 ???????????????????? SGA ????????????(??????)??????????????????????????????????????????????????? ORA-4031 ??????????????????? ORA-4031 Troubleshooting Tool ??????????? ORA-4031 Troubleshooting Tool ?? ORA-4031 Troubleshooting Tool ? ORA-4031 ????????? ORA-4031 ???????????????????????????????????WEB????????????????????????????????My Oracle Support ??????????????????????? ORA-4031 ??????????????????????????????ORA-4031 ?????????????????????????????? ORA-4031 Troubleshooting Tool ???????? My Oracle Support ?????? Diagnostic Tools Catalog ??  ORA-4031 Troubleshooting Tool ???????????????? ORA-4031 Troubleshooting Tool ??????????????? ORA-4031 Troubleshooting Tool ????? ???2??????????????? ORA-4031 ?????????????????????????????ORA-4031 Troubleshooting Tool ????????????????????????????????????????ORA-4031 ???????????????????? ??????????????? ORA-4031???????????? ????????????? ORA-4031 ?????? AWR???????????????????????????????????????????????????????????? ????·???????·???????????? ORA-4031 ?????????? ????????? SR ?????????????????????????? [ADR] ????·??????·?????????? [10g ???] AWR?????(STATSPACK????)???? ?????????? ORA-4031 ????????????????????????????????????????????? ORA-4031 ?????????????? ORA-4031 ??????1?1??????????? ORA-4031 Troubleshooting Tool ???????????(??????????????)???????? ORA-4031 ????????? ???????????????????????????????????????????????? ??????????????????????????????????????1)High Session_Cached_Cursor Setting Causing Excessive Consumption of Shared Pool???SESSION_CACHED_CURSOR ??????????????????????????????????????????????2)Insufficient SGA Free Memory at StartupThis issue could occur if in the init.ora parameters of your Alert log, (shared_pool_size + large_pool_size + java_pool_size + db_keep_cache_size + streams_pool_size + db_cache_size) / sga_target is greater than 90%.????????????????????????? ?????????????? shared_pool_size, large_pool_size, java_pool_size, db_keep_cache_size, streams_pool_size, db_cache_size ????? /sga_target ??? 90% ??????????????????sga_target ??? memory_target ??????????????????????????????????????????????????????????????????? shared_pool_size ???????????????????????????????????????????????????????????????????????(?????????)? sga_target ????????????????????????????????????????????????????????????? ?????????????????????????????????????????????1)In your Alert log,* Look for parameters under "System parameters with non-default values:". If session_cached_cursor * 2000 / shared_pool_size is greater than 10%, then session_cached_cursors are consuming significant shared_pool_size.??? ????????????? "System parameters with non-default values:" ????  session_cached_cursor * 2000 ??? shared_pool_size ? 10% ???????????????????????? ???2) In your Alert log, SGA Utilization (Sum of shared_pool_size, large_pool_size, java_pool_size, db_keep_cache_size, streams_pool_size and db_cache_size over sga_target) is 99%, which might be too high. ??? shared_pool_size, large_pool_size, java_pool_size, db_keep_cache_size, streams_pool_size and db_cache_size ???? sga_target ? 99% ???????????????????? ?????????????????????????????? My Oracle Support ??????????????????????????1)Decrease the parameter SESSION_CACHED_CURSORSSESSION_CACHED_CURSORS ???????????????????????2)Reduce the minimum values for the dynamic SGA components to allow memory manager to make changes as neededSGA ?????????????????(???)?????????????????? 2????????????????????? ORA-4031 Trobuleshooting Tool ????????????????????????????????????????? ORA-4031 Troubleshooting Tool ?????? ORA-4031 ??????????????????????ORA-4031 Troubleshooting Tool ???????????????????????????????????????????????????????ORA-4031 ????????????????????????????ORA-4031 ??????????????? ORA-4031 Troubleshooting Tool ?????????

  Read the article

• ZFS Storage Appliance ? ldap ??????

  - by user13138569

  ZFS Storage Appliance ? Openldap ????????? ???ldap ?????????????? Solaris 11 ? Openldap ????????????? ??? slapd.conf ??ldif ?????????? user01 ??????? ?????? slapd.conf # # See slapd.conf(5) for details on configuration options. # This file should NOT be world readable. # include /etc/openldap/schema/core.schema include /etc/openldap/schema/cosine.schema include /etc/openldap/schema/nis.schema # Define global ACLs to disable default read access. # Do not enable referrals until AFTER you have a working directory # service AND an understanding of referrals. #referral ldap://root.openldap.org pidfile /var/openldap/run/slapd.pid argsfile /var/openldap/run/slapd.args # Load dynamic backend modules: modulepath /usr/lib/openldap moduleload back_bdb.la # moduleload back_hdb.la # moduleload back_ldap.la # Sample security restrictions # Require integrity protection (prevent hijacking) # Require 112-bit (3DES or better) encryption for updates # Require 63-bit encryption for simple bind # security ssf=1 update_ssf=112 simple_bind=64 # Sample access control policy: # Root DSE: allow anyone to read it # Subschema (sub)entry DSE: allow anyone to read it # Other DSEs: # Allow self write access # Allow authenticated users read access # Allow anonymous users to authenticate # Directives needed to implement policy: # access to dn.base="" by * read # access to dn.base="cn=Subschema" by * read # access to * # by self write # by users read # by anonymous auth # # if no access controls are present, the default policy # allows anyone and everyone to read anything but restricts # updates to rootdn. (e.g., "access to * by * read") # # rootdn can always read and write EVERYTHING! ####################################################################### # BDB database definitions ####################################################################### database bdb suffix "dc=oracle,dc=com" rootdn "cn=Manager,dc=oracle,dc=com" # Cleartext passwords, especially for the rootdn, should # be avoid. See slappasswd(8) and slapd.conf(5) for details. # Use of strong authentication encouraged. rootpw secret # The database directory MUST exist prior to running slapd AND # should only be accessible by the slapd and slap tools. # Mode 700 recommended. directory /var/openldap/openldap-data # Indices to maintain index objectClass eq ?????????ldif???? dn: dc=oracle,dc=com objectClass: dcObject objectClass: organization dc: oracle o: oracle dn: cn=Manager,dc=oracle,dc=com objectClass: organizationalRole cn: Manager dn: ou=People,dc=oracle,dc=com objectClass: organizationalUnit ou: People dn: ou=Group,dc=oracle,dc=com objectClass: organizationalUnit ou: Group dn: uid=user01,ou=People,dc=oracle,dc=com uid: user01 objectClass: top objectClass: account objectClass: posixAccount objectClass: shadowAccount cn: user01 uidNumber: 10001 gidNumber: 10000 homeDirectory: /home/user01 userPassword: secret loginShell: /bin/bash shadowLastChange: 10000 shadowMin: 0 shadowMax: 99999 shadowWarning: 14 shadowInactive: 99999 shadowExpire: -1 ldap?????????????ZFS Storage Appliance??????? Configuration SERVICES LDAP ??Base search DN ?ldap??????????? ???? ldap ????????? user01 ???????????????? ???????????? user ????????? Unknown or invalid user ?????????????????? ????????????????Solaris 11 ???????????? ????????????? ldap ????????getent ??????????????? # svcadm enable svc:/network/nis/domain:default # svcadm enable ldap/client # ldapclient manual -a authenticationMethod=none -a defaultSearchBase=dc=oracle,dc=com -a defaultServerList=192.168.56.201 System successfully configured # getent passwd user01 user01:x:10001:10000::/home/user01:/bin/bash ????????? user01 ?????????????? # mount -F nfs -o vers=3 192.168.56.101:/export/user01 /mnt # su user01 bash-4.1$ cd /mnt bash-4.1$ touch aaa bash-4.1$ ls -l total 1 -rw-r--r-- 1 user01 10000 0 May 31 04:32 aaa ?????? ldap ??????????????????????????!

  Read the article

• Smooth animation on QStackedWidget

  - by saravanan

  Hi., i have five Qwidgets (Each QWidget having different controls). i put all the QWidget into one Parent QStackedWidget. for change the display of Qwidget i am using setCurrentIndex(int) function. There is no problem in displaying. but i need to put animation while changing the page. i tried nothing is working. so i removed the QStackedWidget and i put QWidget directly and i tried with QPropertyAnimation. This QPropertyAnimation is working but it's not the smooth animation. Here my code for QPropertyAnimation. QRect pGeo(8,152,width()-16,height()-160); profilePage->show(); //first QWidget QPropertyAnimation *anim1= new QPropertyAnimation(profilePage, "geometry"); anim1->setStartValue(QRect(200,pGeo.y(),pGeo.width(),pGeo.height())); anim1->setEndValue(pGeo); anim1->setEasingCurve(QEasingCurve::InOutSine); anim1->setDuration(500); anim1->start(); how to do the smooth animation using the QWidget or the QStackedWidget. Please give some suggestion to implement the smooth animation.

  Read the article

• Windows 7 UAC manifest file for some VB6 application

  - by Daniel

  Hi, all, I have an old VB6 application which should run on Windows 7 (with UAV set to the default level, 3 of 4 IMHO). It has the functionality to update itself, and Windows 7 is now complaining that it would modify the computer (At least windows 7 is right here). I was able to run it in Vista with some kind of manifest file, but this does not seem to work anymore (which is the intended behaviour if I think of it). The manifest file is this: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="1.1.0.24" processorArchitecture="X86" name="IKOfficeAppStarter" type="win32"/> <description>IKOffice Starter</description> <dependency> <dependentAssembly> <assemblyIdentity type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" processorArchitecture="X86" publicKeyToken="6595b64144ccf1df" language="*"/> </dependentAssembly> </dependency> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v2"> <security> <requestedPrivileges> <requestedExecutionLevel level="asInvoker" uiAccess="true"/> </requestedPrivileges> </security> </trustInfo> </assembly> The manifest can be found near the exe "IKOffice Starter.exe" and is called "IKOffice Starter.exe.manifest", which should be okey. Currently the Shield Icon has gone from my .exe, but when try to start the software, i get the message "Der angeforderte Vorgang erfordert höhere Rechte", or translated to english "the requested operation requires elevation". What can I do to stop windows to bug me anymore, so I can install this application on our clients computers. Hey, I already told Windows to run it as Invoker, so why is it still complaining?

  Read the article

• WPF MVVM UserControl Binding "Container", dispose to avoid memory leak.

  - by user178657

  For simplicity. I have a window, with a bindable usercontrol <UserControl Content="{Binding Path = BindingControl, UpdateSourceTrigger=PropertyChanged}"> I have two user controls, ControlA, and ControlB, Both UserControls have their own Datacontext ViewModel, ControlAViewModel and ControlBViewModel. Both ControlAViewModel and ControlBViewModel inh. from a "ViewModelBase" public abstract class ViewModelBase : DependencyObject, INotifyPropertyChanged, IDisposable........ Main window was added to IoC... To set the property of the Bindable UC, i do ComponentRepository.Resolve<MainViewWindow>().Bindingcontrol= new ControlA; ControlA, in its Datacontext, creates a DispatcherTimer, to do "somestuff".. Later on., I need to navigate elsewhere, so the other usercontrol is loaded into the container ComponentRepository.Resolve<MainViewWindow>().Bindingcontrol= new ControlB If i put a break point in the "someStuff" that was in ControlA's datacontext. The DispatcherTimer is still running... i.e. loading a new usercontrol into the bindable Usercontrol on mainwindow does not dispose/close/GC the DispatcherTimer that was created in the DataContext View Model... Ive looked around, and as stated by others, dispose doesnt get called because its not supposed to... :) Not all my usercontrols have DispatcherTimer, just a few that need to do some sort of "read and refresh" updates./. Should i track these DispatcherTimer objects in the ViewModelBase that all Usercontrols inh. and manually stop/dispose them everytime a new usercontrol is loaded? Is there a better way?

  Read the article

• COM Object Method Invoke Exception - Silverlight 4

  - by Adam Driscoll

  I'm trying to use the new AutomationFactory provided with Silverlight 4 to call a .NET COM class. .NET COM-Exposed Class: public class ObjectContainer { public bool GetObject([Out, MarshalAs((UnmanagedType.IUnknown)] out object obj) { obj = new SomeOtherObj(); return true; } } Silverlight Assembly: dynamic objectContainer; try { objectContainer = AutomationFactory.GetObject(ProgId); } catch { objectContainer = AutomationFactory.CreateObject(ProgId); } object obj; if (!objectContainer.GetObject(out obj)) { throw new Exception(); } When I call objectContainer.GetObject(out obj) an exception is thrown stating: Value does not fall within the expected range. at MS.Internal.ComAutomation.ComAutomationNative.CheckInvokeHResult(UInt32 hr, String memberName, String exceptionSource, String exceptionDescription, String exceptionHelpFile, UInt32 exceptionHelpContext) at MS.Internal.ComAutomation.ComAutomationNative.Invoke(Boolean tryInvoke, String memberName, ComAutomationInvokeType invokeType, ComAutomationInteropValue[] rgParams, IntPtr nativePeer, ComAutomationInteropValue& returnValue) at MS.Internal.ComAutomation.ComAutomationObject.InvokeImpl(Boolean tryInvoke, String name, ComAutomationInvokeType invokeType, Object& returnValue, Object[] args) at MS.Internal.ComAutomation.ComAutomationObject.Invoke(String name, ComAutomationInvokeType invokeType, Object[] args) at System.Runtime.InteropServices.Automation.AutomationMetaObjectProvider.TryInvokeMember(InvokeMemberBinder binder, Object[] args, Object& result) at System.Runtime.InteropServices.Automation.AutomationMetaObjectProviderBase.<.cctorb__4(Object obj, InvokeMemberBinder binder, Object[] args) at CallSite.Target(Closure , CallSite , Object , String , Object& ) at CallSite.Target(Closure , CallSite , Object , String , Object& ) at ApplicationModule.ObjectContainer.GetObject() Wha's the deal?

  Read the article

< Previous Page | 404 405 406 407 408 409 410 411 412 413 414 415  | Next Page >