Search Results

Search found 14738 results on 590 pages for 'outlook settings'.

Page 408/590 | < Previous Page | 404 405 406 407 408 409 410 411 412 413 414 415  | Next Page >

• External TV only allows 640x480 using VGA cable

  - by EdC

  I have Ubuntu precise installed on a MacBook Pro. When connecting to an external television using a VGA style cable the highest resolution available seems to be 640x480. I'm using the proprietary NVIDEA Accelerated Graphics Driver (version current) and attempting to setup the TV using the nvidea-settings tool. I know all the equipment supports higher resolutions because of the following: Prior to rebuilding my machine with precise, the same TV, cabel & adapter gave higher resolutions The same machine & TV when used with a HDMI cable allows higher resolutions Windows laptops with the same cable & TV are able to achieve higher resolutions I'm not sure what to look for next, there are some similar FAQ questions but I'm not sufficiently familiar with the areas involved to know if these are my issue or are safe to try. Specifically: colord problem & my monitor resolution 640*480 with no other options! - is the closest, but as I'm having no problems with the main laptop monitor I'm not sure the described symptoms apply. I can't work out from the answer or Bumblebee site how to determine if nvidia optimus applies to my laptop. Why isn't my monitor's native resolution appearing as an option? - suggests configuring X by hand, but doesn't entirely match the symptoms I'm seeing

  Read the article

• Ubuntu 11.10 loads from live usb fine, but boots to black screen from harddrive. Why?

  - by Estel

  A few days ago I had a hard drive failure, which was running Windows XP (32-bit) just fine. The second hard drive in my computer held a few unimportant files, so I formatted it in the Ubuntu setup and installed 11.10 without a hitch. I had been using it for about a week, but decided to install Windows 7 (64-bit) in order to utilize Networking with my home server (running Windows Server 2000). My system is 64-bit based, and thus I had no problems installing other than a basic RAM error that required me to remove my RAM down to a single stick. I played with the settings in Windows 7 for around an hour before I shut down. After reinstalling the RAM, Windows 7 would not boot. In this, I then assumed that something about my system was rejecting Win7 and I reinstalled Ubuntu. However, now Ubuntu (11.10) boots into black screen, and I've already attempted activating the grub menu with the shift key, and following steps listed here: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen but nothing seems to work. I've reinstalled twice now, with the same result each time. Now, the very odd part about this whole scenario is that the USB I installed from has no problems booting as a live USB. This puzzles me greatly, because the hard drive boots straight to black screen and the live USB loads normally. At this point, my only theory is that the boot sector of the hard disk was somehow corrupted with Win7, and that Ubuntu was unable to completely write through. I used Darik's Boot n Nuke to wipe the drive, but was met with an error, this also puzzles me because the hard disk has no promblems reading or writing. Any suggestions/comments are appreciated. If you have a theory, I will be more than happy to oblige. Additional information: Intel Core2 Duo e6400 2.13GHz nVidia GeForce 7-series (7900 GS) 4 GB DDR2 333MHz (2x 2GB) Dell XPS 410 BIOS Revision 2.5.3

  Read the article

• Can the "Documents" standard folder be rescued and how?

  - by romkyns

  Anyone who likes their Documents folder to contain only things they place there knows that the standard Documents folder is completely unsuitable for this task. Every program seems to want to put its settings, data, or something equally irrelevant into the Documents folder, despite the fact that there are folders specifically for this job. So that this doesn't sound empty, take my personal "Documents" folder as an example. I don't ever use it, in that I never, under any circumstances, save anything into this folder myself. And yet, it contains 46 folders and 3 files at the top level, for a total of 800 files in 500 folders. That's 190 MB of "documents" I didn't create. Obviously any actual documents would immediately get lost in this mess. My question is: can anything be done to improve the situation sufficiently to make "Documents" useful again, say over the next 5 years? Can programmers be somehow educated en-masse not to use it as a dumping ground? Could the OS start reporting some "fake" location hidden under AppData through the existing APIs, while only allowing Explorer and the various Open/Save dialogs to know where the "real" Documents folder resides? Or are any attempts completely futile or even unnecessary?

  Read the article

• Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

  - by Korakys

  Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

  Read the article

• Dell M4600 with nVidia Quadro 2000M hangs on boot when external monitor is connected

  - by vladeta

  I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

  Read the article

• How do I uninstall GRUB?

  - by ændrük

  A hard drive that I use only for data storage still has GRUB from past Ubuntu installations. How can I remove GRUB from it without harming the rest of the drive's data? Background I occasionally move the data drive between computers with various boot order configurations, so I would like it to be non-bootable in order to avoid having to accommodate it in each computer's BIOS settings. When I power on a computer while only the data drive is attached, the following appears: error: no such device: fdf38dd4-9e9d-479d-b830-2a6989958503. grub rescue> I can confirm from old backups of /etc/fstab that this was the UUID of a root partition that I recently reformatted and which no longer exists. Here's the the data drive's partition table and raw master boot record. Please note that I'm not interested in workarounds that don't answer my primary question. I can think of several ways to work around this issue, but it bothers me on principle that I don't know how to directly resolve it. Every installation procedure should have a counterpart uninstallation procedure.

  Read the article

• Draw contour around object in Opengl

  - by Maciekp

  I need to draw contour around 2d objects in 3d space. I tried drawing lines around object(+points to fill the gap), but due to line width, some part of it(~50%) was covering object. I tried to use stencil buffer, to eliminate this problem, but I got sth like this(contour is green): http://goo.gl/OI5uc (sorry I can't post images, due to my reputation) You can see(where arrow points), that some parts of line are behind object, and some are above. This changes when I move camera, but always there is some part, that is covering it. Here is code, that I use for drawing object: glColorMask(1,1,1,1); std::list<CObjectOnScene*>::iterator objIter=ptr->objects.begin(),objEnd=ptr->objects.end(); int countStencilBit=1; while(objIter!=objEnd) { glColorMask(1,1,1,1); glStencilFunc(GL_ALWAYS,countStencilBit,countStencilBit); glStencilOp(GL_REPLACE,GL_KEEP,GL_REPLACE ); (*objIter)->DrawYourVertices(); glStencilFunc(GL_NOTEQUAL,countStencilBit,countStencilBit); glStencilOp(GL_KEEP,GL_KEEP,GL_REPLACE); (*objIter)->DrawYourBorder(); ++objIter; ++countStencilBit; } I've tried different settings of stencil buffer, but always I was getting sth like that. Here is question: 1.Am I setting stencil buffer wrong? 2. Are there any other simple ways to create contour on such objects? Thanks in advance. EDIT: 1. I don't have normals of objects. 2. Object can be concave. 3. I can't use shaders(see below why).

  Read the article

• Time Zone on WebLogic Server

  - by adejuanc

  In order to configure the time zone with WebLogic Server, use the following JVM startup command: -Duser.timezone=<timezone> For example, in the java arguments in the admin console at Environments -> Servers -> Servername -> - Server Start tab, configure the startup settings that Node Manager will use to start the particular server. For example: -Duser.timezone='America/Arizona' There are many different time zones, each with its own code. For a complete list please refer to : http://en.wikipedia.org/wiki/List_of_zoneinfo_time_zones For testing, you can run the following code on WLS with a JSP, servlet, or deploying the class: import java.util.Calendar; import java.util.TimeZone; public class TestTimeZone {  public static void main(String[] args) {    Calendar calendar = Calendar.getInstance();    TimeZone timeZone = calendar.getTimeZone();    System.out.println(" your Current TimeZone is : " + timeZone.getDisplayName());    System.out.println(" Time Zone id : "+ timeZone.getID());  } }

  Read the article

• Computer becomes unreachable on lan after some time

  - by Ashfame

  I work on my laptop and ssh into my desktop. I use a lot of key based authentication for many servers for work but recently I couldn't login because ssh would pick up and try all the keys and it stops trying before ultimately falling back to password based login. So right now I am using this command: ssh -X -o PubkeyAuthentication=no [email protected] #deskto The issue is after sometime the desktop would just become unreachable from laptop. I won't be able to open its localhost through IP and today I tried ping'in it and found a weird thing. Instead of 192.168.1.4, it tries to ping 192.168.1.3 which I am sure is the root cause as it just can't reach 192.168.1.4 when its actually trying for 192.168.1.3 Ping command output: ashfame@ashfame-xps:~$ ping 192.168.1.4 PING 192.168.1.4 (192.168.1.4) 56(84) bytes of data. From 192.168.1.3 icmp_seq=1 Destination Host Unreachable From 192.168.1.3 icmp_seq=2 Destination Host Unreachable From 192.168.1.3 icmp_seq=3 Destination Host Unreachable From 192.168.1.3 icmp_seq=4 Destination Host Unreachable From 192.168.1.3 icmp_seq=5 Destination Host Unreachable From 192.168.1.3 icmp_seq=6 Destination Host Unreachable From 192.168.1.3 icmp_seq=7 Destination Host Unreachable From 192.168.1.3 icmp_seq=8 Destination Host Unreachable From 192.168.1.3 icmp_seq=9 Destination Host Unreachable ^C --- 192.168.1.4 ping statistics --- 10 packets transmitted, 0 received, +9 errors, 100% packet loss, time 9047ms pipe 3 Also the ping command message comes in multiple and not one by one. (izx answer's the weirdness I thought there was in ping command.) I did check for desktop, its local IP is still the same, so something is going on in my laptop. Any ideas? P.S. - Laptop runs Ubuntu 12.04 & Desktop runs Ubuntu 11.10 Laptop is connected through wifi to router and Desktop is connected through LAN to router. Update: Even after setting up static IP leases in router settings, I again ran into this issue.

  Read the article

• GUI based backup utility [closed]

  - by Chethan S.

  Possible Duplicate: Comparison of backup tools I have read favorable reviews for 'Back In Time' for the purpose stated above. Still I am posting this question as I have some demands in my mind. Few years back I was using ThinkVantage Rescue and Recovery by IBM on my Lenovo PC under Windows. That provided me nice features like compressed backups, boot time options - OS Repair, Restore entire OS, restore entire system to an older date, restore individual files etc. Out of these the feature I liked the most was compressed backups. Similar features are available in software like Norton Ghost too. In Back In Time I was surprised to see that the snapshot takes up same amount of space as that of the original contents, no compression at all. Furthermore, I was not able to find options to change the compression ratio etc. under settings. According to me compression of backups is a must have feature. Therefore, can anyone suggest me any other utility which can serve the purpose. I insist on GUI based tool since I don't want to mess up with backups!

  Read the article

• Ubuntu Unity (64-bit) Bugs on Nvidia dual screen [closed]

  - by Kristofer

  On my work computer I have upgraded 10.04 to 10.10 and now to 11.04. Upgrades have mostly worked well and the dual screen setup is almost working. There are however a couple of annoying bugs which I tried to report but the bug reporting tool told me to ask about the bugs here. Here's what I have found: Auto-hide stops working. It doesn't seem to matter which application is maximised/covering the dock, it just stays on top. I have tested changing the autohide settings with no result. Scenario: One maximised window on each screen. If I now try to drag the window that doesn't have focus by dragging the top of the window nothing happens. I can also not give the window focus by clicking the top bar, I have to click inside the window and then I can drag the window. If I unmaximise the window with focus it does work and I can both change focus and drag the window directly by clicking the top of the maximised window. Any bug fixes coming for these issues? Any work-arounds?

  Read the article

• Why blogger puts BR tags only when content served via RSS feed?

  - by tamashumi

  I have a problem with using my new blog RSS feed. I wrote a post (the first one) with some code examples formatted by SyntaxHighlighter. To paste a code sample I'm switching from WYSIWYG to HTML view and put the code inside pre tag like this (don't worry, h4 tag was opened a line above the screenshot area): The problem is that such pre tag, when later accessed via RSS feed contains br tags instead of new line characters. Below is screenshot of the adequate RSS source code: What's most important when accessed via www, the post html is formatted fine, no brs inside pre. I verified that by downloading the blog post with wget. So I believe this isn't SyntaxHighlighter issue nor any 'new line' formatting on blog post save. This is a real problem as I want aggregate my blog on employers blog and all formatting of code examples is broken because of that. The base question is: how to get rid of those unwanted brs served via RSS? What's strangest friend of mine also uses blogger for such aggregation and he has no such issue. I checked his RSS feed and there are no brs inside pre tags. We also compared settings of our blogs. However we have found no clue. The blog post RSS for the blog (just check source and search for string: pre class="brush) Mentioned friend's blog Last thing: I see content served from RSS is now also html encoded. If I remember well, it wasn't previously.

  Read the article

• Brightness going up to 100% on loading certain websites in Chrome

  - by picheto

  I'm using Google Chrome version 21.0.1180.89 on Ubuntu 12.04 and my laptop is a Sony VAIO VPCCW15FL (spec sheet). My video driver is the propietary "NVIDIA accelerated graphics driver (post-release updates)(version-current updates)". After installing Ubuntu, I discovered that neither the brightness control buttons (hardware) or the brightness slider (software) worked, and found out I could get the hardware buttons to work by installing the nvidiabl.deb package and oBacklight script. I'm using nvidiabl-dkms 0.77 and oBacklight 0.3.8. Still, the slider on the Ubuntu "Settings" does not work, but I don't care. There is an annoying thing happening when loading certain pages in Google Chrome: the brightness goes up to 100% when loading the webpage or when leaving it (closing the tab or typing a different URL on the omnibox). However, the "brightness tooltip" (that default brightness notification) remembers the position it was set to, so if I adjust the brightness with the HW buttons, the level gets adjusted relative to the value it was set to before "going 100%". I disabled the flash PPAPI plugin, but left the NPAPI plugin enabled, and the problem went away for pages with flash content. Still, the same thing happens when viewing HTML5 video, or when loading, for example, the Chrome Web Store or using the Scratchpad extension. I suppose it has to do with the rendering of certain elements using the GPU, but this is just a guess. This brightness thing does not happen when using Firefox 15.0 or any other application I have used yet. Does anybody know why this may be happening and what could I do to fix this without changing browser? Thanks a lot.

  Read the article

• ifconfig can't see USB wireless

  - by Alex

  I have a wifi USB dongle which I have previously used on a Raspberry Pi (this it is what it is target at). I am trying to get it working on an Nvidia Jetson TK1, however I am having some problems. When I run ifconfig I can't see the wifi, only the ethernet and local loopback. iwconfig reports no wireless extensions on all devices. lsusb does find the device: Bus 002 Device 008: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter So I am not sure why the network tools can't see it. I have tried logging on with a GUI and opening up the network settings through Unity, but cannot see any wireless devices either. Not sure if this is useful, but output of lsmod: Module Size Used by nvhost_vi 2940 0 How can I enable wireless networking on this computer? Command line approach is preferred, but either is fine. UPDATE I don't have the kernel module rt2800usb anywhere on my system. If I do an apt-file search for rt2800usb it lists a number of packages of the pattern: linux-image-3.13.0-*. Perhaps installing one of these will do the trick, but can anyone tell me if its safe to do so?

  Read the article

• Skip CodedUI Tests, use Selenium for Web Automation

  - by Aligned

  Originally posted on: http://geekswithblogs.net/Aligned/archive/2013/10/31/skip-codedui-tests-use-selenium-for-web-automation.aspxI recently joined a team that was using Agile Methodologies to create a new product. They have a working beta product after 10 or so 2 week sprints and already had UI’s that had changed several times as they went through iterations of their UI. As a result, the QA team was falling behind with automated tests and I was tasked to help them catch up and expand their tests. The project is a website. I heard many complaints about how hard it is to work with CodedUI (writing our own code, not relying on the recorder as we wanted re-usable and more maintainable code) then it took me 4+ hours to fix one issue. It was hard to traverse the key and debugging the objects with breakpoints… I said out loud “there has to be a better way or a framework the uses jQuery to run through the tests.” Plus it seemed really slow (wait… finding the object … wait… start putting in text…). Plus some tests would randomly fail on the test agents (using the test settings and an automated build, they are run on VMs using Microsoft test agents). Enough complaining. Selenium to the rescue (mostly). The lead QA guy decided to try it out and we haven’t turned back. We are now running tests in Chrome and Firefox and they run a lot faster. We had IE running to, but some of the tests were running fine locally, but hanging on the test agents. I’ll add some hints and lessons learned in a later post.

  Read the article

• 12.10 Wireless networking

  - by user108594

  I downloaded ubuntu 12.10 using WUBI and cannot connect to the internet. I removed it and downloaded ubuntu 12.04 still cannot connect. This I assume rules out the program being the problem. I reinstalled 12.10. When loaded I get the same message W/red (x) stating Internet not connected. I went to the Settings drop down box and it does not reveal the network list but (enable networking has a ck mark). Am running a HP Laptop with a w/7/64 OS that has a kill switch that indicates (orangeno connection) I downloaded 12.10 on my desktop (on the same network) and everything OK. I tried to follow the instructions in the help menu but got lost and confused . Sincerely Dan Additional Info per request Broadcom 802.11b/g Wlan Internal pc [hp laptop] P.S. I've been out of town for about a month. TKS for your gitback I did install 12.10 via cd and everything ok,but retried alongside 7 and unable to connect to internet,also took laptop and hard wired using ethernet cable and everything ok. stumped again and running out of ideas!!!

  Read the article

• xubuntu 12.04 screen regularly stops refreshing, refreshing resumes after un-/re-maximizing a window

  - by user68477

  My screen frequently stops completely refreshing. I can make it resume refreshing by un-maximizing/re-maximize a window or by switching workspace (the un-/re-maximizing works every time. Switching workspace sometimes has to be done a couple of times). The immediate impression is that the system is frozen: there is apparently no reaction to anything I do but interestingly window title bar will change, if I switch application with (i.e alt+tab or browse through folders) I saw an identical issue in ubuntu 10.04, though a lot less frequent, I never saw this in ubuntu 12.04 (which I have been using the last 4-5 months). After switching to Xubuntu I'm seeing this again and more frequently. The specific reason I'm not sure this is a bug: I installed gnome-control-center which dragged in tons of packages. This was while trying to fix dual-screen setup. I believe the issue surfaced after this. I later meticulously removed every package from this batch (purge) in the hope that every setting would also be removed. But the issue has persisted. Another issue happened at the same time, it may be totally unrelated but it feels as if it is the same basic issue: the screen resolution of the greeter became less than the expected 1680x1050 and often after login there's just a blank and totally unresponsive wallpaper without panel so I have to force reboot. When the login is successful it's very clear that it works hard to determine the correct resolution which is achieved after a few blink to black screens. My questions: 1) Is this a settings issue or a bug? 2) How do I begin to research the issue - could I perhaps some way reset xubuntu/xfce to default. 3) If this is a bug where would be the most appropriate place report this? System: Thinkpad T500 ati radeon HD 3650 $ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 3650 OpenGL version string: 3.3.11627 Compatibility Profile Context $ uname -a Linux srvname 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux xfce 4.10 Compiz 0.9.7.8

  Read the article

• Using pkexec policy to run out of /opt/

  - by liberavia

  I still try to make it possible to run my app with root priveleges. Therefore I created two policies to run the application via pkexec (one for /usr/bin and one for /opt/extras... ) and added them to the setup.py: data_files=[('/usr/share/polkit-1/actions', ['data/com.ubuntu.pkexec.armorforge.policy']), ('/usr/share/polkit-1/actions', ['data/com.ubuntu.extras.pkexec.armorforge.policy']), ('/usr/bin/', ['data/armorforge-pkexec'])] ) additionally I added a startscript which uses pkexec for starting the application. It distinguishes between the two places and is used in the Exec-Statement of the desktopfile: #!/bin/sh if [ -f /opt/extras.ubuntu.com/armorforge/bin/armorforge ]; then pkexec "/opt/extras.ubuntu.com/armorforge/bin/armorforge" "$@" else pkexec `which armorforge` "$@" fi If I simply do a quickly package everything will work right. But if I package with extras option: quickly package --extras the Exec-statement will be exchanged. Even if I try to simulate the pkexec call via armorforge-pkexec It will aks for a password and then returns this: andre@andre-desktop:~/Entwicklung/Ubuntu/armorforge$ armorforge-pkexec (armorforge:10108): GLib-GIO-ERROR **: Settings schema 'org.gnome.desktop.interface' is not installed Trace/breakpoint trap (core dumped) So ok, I could not trick the opt-thing. How can I make sure, that my Application will run with root priveleges out of opt. I copied the way of using pkexec from synaptic. My application is for communicating with apparmor which currently has no dbus interface. Else I need to write into /etc/apparmor.d-folder. How should I deal with the opt-build which, as far as I understand, is required to submit my application to the ubuntu software center. Thanks for any hints and/or links :-)

  Read the article

• How do I bridge my wireless to my wired connection?

  - by gatoatigrado

  I want to bridge the wireless connection with the wired connection. The wireless is the host and the wired is the client, so to speak. Internet sharing (inet <--> wifi <--> ethernet) I tried to bridge my ethernet connection by going to network manager edit connections wired edit IPv4 settings shared to other computers Screenshots However, it seems to automatically disconnect half a second after it says "connection established"! edit 2 got the network manager logs, it seems the address is in use. See http://pastebin.com/DjqRshxW , line 45. nm-tool output is here: http://pastebin.com/x5Aci5V1 . I tried firestarter, as mentioned in another thread, and no luck. I don't have time to bother with a dozen command line tricks, unless is copy & pasting a shell script... so please suggest ways that use GUIs and/or won't leave my computer in a confused state (e.g. disabling network manager, manually connecting to a WPA network, installing brutils, etc.). edit: one idea that would work, if it's possible -- is there a way to share connections via SSH and SOCKS5? I'd need to do this at a system-wide level though; I only know how to do it through the browser now. Then, I could run ifconfig eth0 192.168.4.1 on the computer sharing the inet, and ifconfig eth0 192.168.4.2 on the computer I'm trying to share with; I know this does work for host-to-host transfers. edit 3 If I run sudo killall dnsmasq, then nothing is using the 10.42.43.1 address the network manager sharing wants to use. But now it just takes longer to die, with error "NetworkManager[5935]: dnsmasq died with signal 9" [ http://pastebin.com/4FNtpugi ]. Looking at just the commands [ http://pastebin.com/1vrtQeWk ], maybe it's trying to route eth0 to itself? I'm not that familiar with networking things though.

  Read the article

• How to get Nvidia graphics working on Sony Z laptop?

  - by projectshave

  I have an older Sony VAIO Z 590 laptop with switchable graphics between Intel and Nvidia GeForce 9300M. It is NOT Optimus. I did a clean install of Ubuntu 12.04. Everything works, but it's using Unity 2D with the Intel drivers. I've tried loading the Nvidia drivers from "Additional Drivers", but it says "this driver is activated but not currently in use". When I run "nvidia-settings", an error window pops up to say "You do not appear to be using the NVIDIA X drivers." "lspci" shows both graphics cards. Let me know if I should add more info. How do I get the Nvidia graphics and Unity 3D working? More info: $ lshw -short -class display H/W path Device Class Description ============================================== /0/100/1/0 display G98 [GeForce 9300M GS] /0/100/2 display Mobile 4 Series Chipset Integrated Graphics C $ glxinfo name of display: :0 Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Excerpts from Xorg.0.log: [ 16.373] (II) LoadModule: "glx" [ 16.373] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 16.386] (II) Module glx: vendor="NVIDIA Corporation" [ 16.386] compiled for 4.0.2, module version = 1.0.0 [ 16.386] Module class: X.Org Server Extension [ 16.386] (II) NVIDIA GLX Module 295.49 Tue May 1 00:09:10 PDT 2012 [ 16.608] (II) NVIDIA dlloader X Driver 295.49 Mon Apr 30 23:48:24 PDT 2012 [ 16.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 17.693] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

  Read the article

• High Availability

  - by mattjgilbert

  Udi Dahan presented at the UK Connected Systems User Group last night. He discussed High Availability and pointed out that people often think this is purely an infrastructure challenge. However, the implications of system crashes, errors and resulting data loss need to be considered and managed by software developers. In addition a system should remain both highly reliable (backwardly compatible) and available during deployments and upgrades. The argument is that you cannot be considered highly available if your system is always down every time you upgrade. For our recent BizTalk 2009 upgrade we made use of our Business Continuity servers (note the name, rather than calling them Disaster Recovery servers ? ) to ensure our clients could continue to operate while we upgraded the Production BizTalk servers. Then we failed back to the newly built 2009 environment and rebuilt the BC servers. Of course, in the event of an actual disaster there was a window where either one or the other set were not available to take over – however, our Staging machines were already primed to switch to production settings, having been used for testing the upgrade in the first place.   While not perfect (the failover between environments was not automatic and without some minimal outage) planning the upgrade in this way meant BizTalk was online during the rebuild and upgrade project, we didn’t have to rush things to get back on-line and planning meant we were ready to be as available as we could be in the event of an actual disaster.

  Read the article

• Why are "Inverted Colors" considered an accessibility feature? [migrated]

  - by RLH

  Why is it that in Apple software (OS X and iOS,) the "Inverted Colors" display feature is considered an accessibility option? I understand that some users are color-blind. This would justify the Black & White, or grey-scale modes. What I don't understand is how or why does inverting the display color help someone with any specific, visual impairment or dysfunction. As a programmer that wants to understand the need so that I can develop better, accessible software, what purpose does this feature serve to the end user who has some form of visual impairment? NOTE: I felt that this was a hard question to categorize on StackExchange. I settled here on Programmers because I assume that questions of accessibility are important to all developers and this question sits somewhere in the middle between topics that StackOverflow and SuperUser may cover. Also, this question isn't specific to Apple software. I've just noticed that this feature has been available on Macs for a very long time, it's a feature on iOS, and it's always associated with the Accessibility settings. If I can garner some information regarding the needs of some users, I think that I can develop better, accessible software.

  Read the article

• How to disable the text shadow in plasma widgets KDE 4.6?

  - by piedro

  I just switched completely to Kubuntu for the sake of the more suitable applications for my purposes and their overall integration in the system. But I'm not very happy with all those desktop effects and tranparent looks everywhere. Some things a matter of taste I guess. Some things just unbearable for me having weak eyes. One of them is that about every light theme seems to be using a text shadow effect on the plasma widgets. A white "spilled milk" effect underneath dark text on light grey or glassy background. Drives my eyes nuts! I can remove this effect on the desktop folder by unselecting "shadow" as text effect. I can't find any way to switch it of in the panel and the plasma widgets. My second, related question is, is there a plasma theme matching the oxygen look of the default desktop in light colors that uses the same colors as the ones chosen in the KDE color settings, - simple, opaque, no effects, gnome-like? Plz help someone! thx, piedro

  Read the article

• VirtualBox 4.0.10 is now available for download

  - by user12611829

  VirtualBox 4.0.10 has been released and is now available for download. You can get binaries for Windows, OS X (Intel Mac), Linux and Solaris hosts at http://www.virtualbox.org/wiki/Downloads The full changelog can be found here. The high points for the 4.0.10 maintenance release include .... GUI: fixed disappearing settings widgets on KDE hosts (bug #6809) Storage: fixed hang under rare circumstances with flat VMDK images Storage: a saved VM could not be restored under certain circumstances after the host kernel was updated Storage: refuse to create a medium with an invalid variant Snapshots: none of the hard disk attachments must be attached to another VM in normal mode when creating a snapshot USB: fixed occasional VM hangs with SMP guests USB: proper device detection on RHEL/OEL/CentOS 5 guests ACPI: force the ACPI timer to return monotonic values for improve behavior with SMP Linux guests RDP: fixed screen corruption under rare circumstances rdesktop-vrdp: updated to version 1.7.0 OVF: under rare circumstances some data at the end of a VMDK file was not written during export Mac OS X hosts: Lion fixes Mac OS X hosts: GNOME 3 fix Linux hosts: fixed VT-x detection on Linux 3.0 hosts Linux hosts: fixed Python 2.7 bindings in the universal Linux binaries Windows hosts: fixed leak of thread and process handles Windows Additions: fixed bug when determining the extended version of the Guest Additions Solaris Additions: fixed installation to 64-bit Solaris 10u9 guests Linux Additions: RHEL6.1/OL6.1 compile fix Linux Additions: fixed a memory leak during VBoxManage guestcontrol execute Technocrati Tags: Sun Virtualization VirtualBox var sc_project=1193495; var sc_invisible=1; var sc_security="a46f6831";

  Read the article

• Trouble dual booting Ubuntu 14.04 & Windows 8

  - by AkBKukU

  My motherboard (MSI G45-Z87) has efi, I still can't figure out how to make stuff work with it. I had Ubuntu working with Windows 8 before 14.04 came out and I did a clean install of Ubuntu when it did to upgrade. Since then I hadn't been able to boot Windows but I don't use it anyway so it didn't effect me. I tried getting it working today so I could use some adobe software. The last time I had tried to do something with the boot it was giving me warnings that my boot files were to far in the drive. So I followed this guide to use gparted and boot-repair to add a boot partition. I was able to reboot Ubuntu after that. I then proceeded to install Windows 8.1 to a different drive. Now the computer will only boot straight into Windows and if I manually select Ubuntu, but not the drive Ubuntu is on, to boot it stops on a black screen during boot after showing the Ubuntu logo. I've run boot-repair in several different ways but have had no luck. Here is the boot summary info from the recommended settings for it. I could really use some help.

  Read the article

< Previous Page | 404 405 406 407 408 409 410 411 412 413 414 415  | Next Page >