Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 409/1213 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >

• SD Card only mounted after a reboot

  - by hattenn

  I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Blurry printed raster images with Brother MFC-8840D

  - by Adam Monsen

  (NOTE: crossposted here: ubuntuforums.org/showthread.php?t=1621795) I've got a Brother MFC-8840D. Works great with Ubuntu server! Setting up a CUPS print server was pretty straightforward, and I also finally got network scanning working reliably with saned. Printing documents and Web pages works well: fonts are crisp/clear, etc. One issue has got me completely vexed: printing raster (ie: JPG) images. They are blurry. For example, I can scan a page of black and white text at 150 or 300 dpi. The grayscale image looks perfect on my monitor. But the printed version is much blurrier than the original, regardless of the "print resolution" dpi I choose. As a counterexample, if I use the "copy" function of the MFC-8840D, the copy looks excellent, and this function is much, much faster than if I scan then print a scan of same. I've googled around a bunch and tried different tricks (printing a PDF with the image from evince, printing with Gimp, EOG and other applications) but I just can't print anything that looks as good as a copy made with the MFC-8840D. Any ideas? I'm using Ubuntu 10.04.1 LTS server. I'm using the PPD file from solutions.brother.com. Thanks, -Adam

  Read the article

• Wheres my memory going?

  - by Stu2000

  My machine keeps 'freezing' before eventaully logging out with all the programs exiting. This is rather annoying, and I think its because I keep running out of memory. I am not running any custom software, just netbeans, chrome etc. (Stuff I usually run on other ubuntu computers without issue). For some reason my memory usage is through the roof as seen here, but I can't quite figure out why. Here is a screenshot which may be useful with htop and gnome-system monitor open as user and as root. I notice that my console-kit-daemon is taking up about a gig of 'virtual memory'. Is that normal? Any tips/advice will be helpful. In the meantime I have ordered 2 x 4 gig ram sticks to try and just throw hardware at the issue.

  Read the article

• HP Pavilion 15 with AMD dual graphics - Ubuntu live environment not starting

  - by creepus

  I've had this laptop for about a day now and have decided to try Ubuntu on it and determine if I want to install it. I created a USB, it booted (Secure Boot was on, I tried with Secure Boot off to no effect), and then the problem occurred. The screen turned off for a second, turned back on to a black screen, shut off again and turned back on with a dialogue box telling me that the system had to use low-graphics mode. I clicked OK, selected low-graphics mode from the menu and clicked OK. The screen switched to the boot messages and did not go any further than this. Ctrl+Alt+DEL started rebooting the laptop though. I tried booting again, but this time I edited the boot options in GRUB to add nomodeset. This time, the laptop only booted to a black screen. Ctrl+Alt+F2 took me to a prompt, I tried startx from there, but X didn't start, complaining that it wanted kernel mode setting back. I can not seem to find any option to disable one graphics chip or the other in the UEFI setup menus. Laptop : HP Pavilion 15-E004AU. The CPU : AMD A6-4400M APU with Radeon(tm) HD Graphics The graphics chip : AMD Radeon HD 7520G + 8670M Dual Graphics. The Ubuntu version : 13.10, 64 bit. Thanks. EDIT: I tried 12.04.3 LTS, it managed to bring the desktop up. There are severe graphics glitches after about two minutes though.

  Read the article

• I can't modify the screen brightness on Xubuntu 13.10

  - by linuxer

  I got this problem with brightness on my fresh xubuntu 13.10 install.. It ain't inc/decrease the screen brightness when pressing Fn+F5/F6 !! I've tried some solutions like setting these values in the /etc/default/grub file and sudo updating grub (this worked for me on my previous xubuntu 13.04 install) GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor" GRUB_CMDLINE_LINUX="acpi_osi=Linux acpi_backlight=vendor" But still not working though :/ I got a Sony VAIO VPCEJ3B1E running xubuntu 13.10 x64bit and an NVidia GeForce 410M and using the propritory drivers 319 Thanks in advace!

  Read the article

• How to turn a pdf into a text searchable pdf?

  - by don.joey

  I have a number of scanned documents in pdf and I want to be able to search them. How can I do that? Essentially I have to OCR the pdf and then blend the extracted text back into a new pdf. I have unsuccesfully tried pdfocr (which gives me this issue: https://github.com/gkovacs/pdfocr/issues/7) pdfsandwich (of which the software center says it is a poor package and I should not install it) Is there a software package I am unaware of? Or a script that does this?

  Read the article

• Root access issues - how do others manage this?

  - by Ciaran Archer

  Hi there I use my Ubuntu 10.04 LTS instance (via Virtual Box on Windows 7) with a non-root user. I am trying out developing Rails applications and I notice that I need to run some rails commands with sudo. The problem this gives me is some files are created by the root user then, and I cannot edit them via a GNOME window with my logged in user. What is the correct thing to do here? Should I somehow always login as root? If so how? Is there some way for me to give all files under my home directory (where I do all my Rails work) the correct permissions for all users, so I can edit them with my logged in user via a window? At the moment I have to resort to opening a file via the command line like this sudo gedit myFile.rb - this is not very sustainable! Thanks in advance!

  Read the article

• trying live-usb 12.04.1 image on an old desktop

  - by 213441265152351

  I am trying to load Ubuntu 12.04.1 32-bit desktop image on an old desktop computer. The system shows the initial menu, but after a while, I get an error like the one in the following two screenshots (it takes a few seconds to go from one to the other in the screen): I tried to load it using the different USB ports at the back of the computer, just in case, and I get basically the same error. Find another screenshot from another try: Any ideas what might be happening? NOTES: I checked the md5sum of the iso file to be e235b63c02644e219b7bf3668f479c9e *ubuntu-12.04.1-desktop-i386.iso. I did the 'Test' on the laptop where I created the USB drive, and it loads up correctly. The desktop computer in question is an old AMD Duron 1800MHz with 512MB RAM. I ran a memtest on the computer, and all went fine.

  Read the article

• I am so confused about desktop/viewport switching, all I want to do is bind keyboard shortcuts to switch desktops

  - by Alex

  I've installed a pre-made Ubuntu 10.04 image at work, and I can't seem to figure out how to get desktop switching to work. No shortcuts work, and all the help I can get from the Ubuntu forums is "CTRL-Alt-Left/Right should work." So lemme get this straight. Switching between desktops is deprecated, so we use viewports, which are managed by Compiz, which has one of the most absurd configuration managers out there. Lovely. Can anyone straighten this out for me, and anyone else who might stumble on this question?

  Read the article

• Ubuntu won't fit 10" netbook's native display

  - by Daniel

  I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is some bits of the system doesn't fit the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as I can see the Unity Launcher. My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, the desktop area is lowered, with bits of it hidden beneath the screen; & there's a black space left at the top of the screen. I had to revert to the old setting 1024x768 to push the desktop upwards and remove the black space.

  Read the article

• Help setting up wireless in Ubuntu 13.04

  - by James

  I'm having problems connecting my WIFI in Ubuntu 13.04 . So I was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe I put in the wrong data or maybe not enough. Would that make it work? I just don't know how to find out some of the data you need to put in? I'm new and it's confusing. Does anyone know the solution? Here is lspci: james@james-MM061:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Computer information: Model: Dell MM061 Mobile Intel(R) 945GM Express Chipset Family [Display adapter] (2x)

  Read the article

• How to create Windows XP LiveUSB using Ubuntu to replace it

  - by Orion Clark

  I am using an Acer Aspire One netbook with no CD-disk drive, and would like to uninstall Ubuntu 12.04 LTS and install Windows XP in its place. The problem here is that I can't seem to find a program that can put the windows boot files on a USB drive from an ISO file. I have Ubuntu fully installed and have tried using unetbootin. When I tried booting from unetbootin I got a screen with a blue box that had the word "default" in it highlighted. underneath the box there was a countdown that said "will boot from default in 10" after the countdown finished the number would revert to ten and nothing would happen. Can someone tell me another program that would be useful for this please?

  Read the article

• How do I install Gyachi on PPC Ubuntu 12.04.1?

  - by Sergiu

  So I'm trying to install Gyachi on my iMac G5 runnig Ubuntu 12.04.1 but I can't seem to find a package that works on powerpc interface. I did find some powerpc enterprise Linux.rpm builds on the internet but I have no idea how to install them. This is the lin: http://rpmfind.net/linux/RPM/epel/5/ppc/gyachi-1.1.71-5.el5.ppc.html Does anyone know how to install that, or would it work? Is there any Skype alternative that has both audio and video for Ubuntu? In my knowledge, Gyachi is the only one that at least does both audio and video for Yahoo.

  Read the article

• Software Center empty "No usefulness from server" "no username in config file"

  - by Theron G. Burrough

  I upgraded to 12.04 LTS and ran Software Center while a few things were running, and crashed. (2 GB RAM on a Netbook.) On reboot, Ubuntu One interface would not find any programs, neither installed (to run) nor available for download. So I launched Software Center, which opens, but does nothing. I click "Close" button and get a "Force Quit?" box. So I quit. Did research, learned to run Software Center from Terminal: 2012-04-29 23:14:36,978 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file Then tried the below without success: Reinstallation of software center: sudo apt-get install --reinstall software-center Didn't work. Found this in a post: remove the config file for software-center then log out and back in sudo rm -rf ~/.config/software-center Didn't work. Reinstalled Software Center with Synaptic Package Manager. Still no dice! And I am a Linux newbie, so I don't know where the Dickens that config file is. Help appreciated.

  Read the article

• Game: Age of Empires sound good but video "out of range"

  - by Ezekiel

  I'm new to the Ubuntu realm. Currently i'm using Linux Mint 12 with Wine 1.4 and PLAYONLINUX as game loading/playing programs. Video card is MSI GeForce FX5200 (NVIDIA) and is 3d enabled. I can play "Call of Duty 5 demo just fine. My real love is the Age of Empires series games. I loaded the WINE version of AOE 1 demo. No sound and no picture. Black screen with "Out of Range" window in red. I loaded my CD version of AOE 1 through PLAYONLINUX. I get the sound just fine but again the black screen with "Out of Range" window in red. I have used all the monitor settings in both the "settings" and in winecfg. None of the eight monitor options worked in any combination. I have checked all the questions and blogs on this error and tried all I found and no one seems to come up with a real fix. I guess I need to know exactly what the "Out of Range" means. Any help? Anywhere? Thanks

  Read the article

• emacs keybindings in ubuntu 12.04

  - by sam

  I am trying to get emacs-like keybindings in gtk, firefox, chrome, etc. I have followed the directions recommended here (and in lots of places) but to no effect: http://kb.mozillazine.org/Emacs_Keybindings_(Firefox) In other words, I added 'gtk-key-theme-name = "Emacs"' to my .gtkrc-2.0, and I also ran gconf-editor and set "/desktop/gnome/interface/gtk_key_theme" to "Emacs". I even rebooted just for good measure. I am using an ordinary Ubuntu 12.04 install, with unity3d as the desktop environment. Thanks! Sam

  Read the article

• OpenVPN fails to start automatically

  - by Kaushal Shriyan

  Hi, I have two openvpn site configs. I have configured openvpn in daemon mode and it needs to be restarted automatically while bootup. I am always faced with the situation below. and then i need to restart it manually. Dec 27 16:24:26 kaushal-laptop ovpn-sjc2[1287]: script failed: external program exited with error status: 1 Dec 27 16:24:26 kaushal-laptop ovpn-sjc2[1287]: Exiting Please suggest/guide Thanks

  Read the article

• Ubuntu 12.10 with kernel 3.5.0-18

  - by Chaitanya

  I had ubuntu 12.04 with kernel 3.0.2. Today I have updated my system and got 12.10 with kernel 3.5.0-18. Now when I boot my machine with 3.5 kernel, it starts until the page where I enter my password. Within seconds, I get a page with looooong list of some commands or list. I cant take screenshot of that. It looks something like, [1.2234978942837]kjsahfa;lsfksld;fkjsf;owieurwirejw/rnw;erkjwelrjw2309480432 [1.3294823498230948]as;lfjsf;iuwrijrwjlkerjw;rekwer;lkwjre;lkjRIJWEORIWE'JJA; something like this. Luckily, in my boot page, I have 3.0.2 kernel also. When I boot with 3.0.2 kernel there is no problem. But when I boot with 3.5.0, it throws that wierd error. I wont be able to do anything at that time. None of the keys work. I have to forcibly shutdown the machine and restart with 3.0.2 kernel. Please help..... Thanks, Chaitanya.

  Read the article

• Can I use Ubuntu as a wireless media server which performs all decoding/processing server-side?

  - by AthloX

  I want to setup UBUNTU 12.04 desktop as Home media server. I have window 7 netbook and UBUNTU 12.04lts laptop even a samsun galaxy note tablet (android). Two desktop in other room with dualboot win7 and ubuntu. SHARP AQUOS Plasma Tv with Wi-Fi connected. I want to install ubuntu as media server to stream audio/video files over wi-fi. Not only this i want this media server to use its own processing power to decode ans stream so that on remote end only file can play without using their own resource. Is it possible to use ubuntu as media server to stream files without making the remote end to use there own resource. I want only bandwidth of Wi-Fi to be use in this and media center hardware resource.Remote end gadget should use only speaker and screen and not processing power of their own. Please any suggestion is it possible to do so ?

  Read the article

• Issues with Dz77BH-55K Motherboard and i7 processor on 12.04

  - by Naveed

  I just built a computer with Intel's DZ77BH-55K motherboard with i7-3770 processor. On 12.04, 11.10, and 11.04 and Linux Mint 12, the computer has been really laggy. The graphics aren't working (choppy effects, bad resolution) and the keyboard and mouse inputs are even laggy and unreliable (skips keystrokes). I'm not sure what the problem is or what I can do to fix it. I tried sudo apt-get install mesa-utils but nothing changed. I've also messed around in the BIOS but no luck there either. Any ideas? Could it possibly be a hardware issue?

  Read the article

• Edit 100MB+ file

  - by Majid Fouladpour

  I have captured some traffic with Wireshark and saved the result as a file. The file has 3 sections now: request headers response headers response body The response body is to become an flv file, but now everything is saved as a single file. So I need a way to delete the first two sections from the file, but the problem is that the file is very big (over a thousand mega bytes). I have tried to open it with gedit, but no matter how long I wait, gedit hangs and remains unresponsive until I kill it. What tool can I use to edit this big file easily?

  Read the article

• How to find an ip of connected vnc client from vncserver log?

  - by Kittipat Tatsanakit

  I run the vncserver using vncserver:1 I take a look in ~/.vnc/ubuntu:1.log I only show something like this. Sat Oct 6 20:40:12 2012 Connections: accepted: 0.0.0.0::2043 SConnection: Client needs protocol version 3.8 SConnection: Client requests security type VncAuth(2) Sat Oct 6 20:40:14 2012 SConnection: AuthFailureException: Authentication failure Connections: closed: 0.0.0.0::2043 (Authentication failure) Sat Oct 6 20:40:16 2012 Connections: accepted: 0.0.0.0::2048 SConnection: Client needs protocol version 3.8 SConnection: Client requests security type VncAuth(2) How do I find the ip of connected vnc client?

  Read the article

• How to solve this problem starting new Opera-windows on dual monitor-setup?

  - by Mnementh

  I use Opera and have a setup with two monitors. If I want to open a new URL opera -newwindow URL. The outcome differs, if I execute this command in a program on the same screen where Opera is, or on the other. On the same screen everything is fine. I get the message opera: Activated running instance and the new window with the URL is opened. On the other screen, I get a dialog with the following message: It appears another opera instance is using the same configuration directory because its lock file is active: /home/(my name)/.opera/lock and the URL is not shown. That's not only from console, also if I click a link in E-Mail or so. How can I fix this? Window-manager is awesome, if it does make a difference.

  Read the article

• No Sound in HTML5 and Google Chrome after update to 13.10

  - by rechengehirn

  After upgrading to Ubuntu 13.10 i have no sound for HTML5 players in Google Chrome Browser. Firefox works. Flash Players are working. No sound on Youtube when using HTML5. No sound on vimeo (They have html5 player as standard). When I open the soundapplication, google doesn't show up when I try to play a html5 video. But it shows up, when playing a Flash Video. Google Chrome Version is: 24.0.1312.52 Installed an updated via ppa: deb http://dl.google.com/linux/chrome/deb/ stable main

  Read the article

• Cinnamon Settings blank after update

  - by Seth Balmore

  Using Ubuntu 12.04 with the cinnamon desktop, I installed the most recent updates and now when I open "System Settings" the entire window appears as a blank white screen. The headers for APPEARANCE, PREFERENCES, and HARDWARE are present, but the usual icons for *Background, *Hot Corners, *Printers, etc. are no longer visible. Some of these settings can still be altered via the terminal: cinnamon-settings backgrounds cinnamon-settings applets cinnamon-settings mouse and touchpad But other commands, such as cinnamon-settings hot corners are met with an error. This is obviously a problem with cinnamon, so I just want to bring it to attention and find out when they plan on fixing the bug. A workaround can be found on the web, but it seems way to risky to rely on.

  Read the article

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >