Search Results

Search found 16899 results on 676 pages for 'local'.

Page 409/676 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >

• How Can I prevent a specific application from being run on a specific machine using Group Policy?

  - by Mike

  I know this is possible to do and I am working on it with limited success. I believe the Group Policy I want is "Do Not Run Specified Windows Applications" - I can enable this and add the .exe I want to the list of programs not to be run. I have tried this on my local machine by running gpedit.msc going to User Config Admin Templates System and then choosing that policy and editing and enabling it. Doing it this way verifies that it works as I could then not run the specified .exe (XenAppWeb.exe) So this is great. I have created a GPO to do the same thing in GP Management on my domain controller where we centralize this, enforced it, applied it to an OU, and put one of our machines into this OU to test it. I have let it sit there for 3 days, run gpupdate /force, and when I try to run XenAppWeb.exe on this machine, it still lets me run it fine. What can I look at to troubleshoot this? I should note that I am trying to enact this policy on Windows XP machines (Virtual Machines) Thanks, Mike

  Read the article

• Decreasing lagging on router, while gaming

  - by user2699451

  I had absolutely no idea where to post this question and get a professional answer for it but here goes... Okay, so I guess everyone whos is reading this had played online, and so I was playing LoL again tonight and my brother decided that now was a great time to go on youtube and start watching a movie, so my ping (connecting from South Africa to EU west server) is around 190-220 average, however it started spiking to 2000 and average was 600-800, so it arised the question, how ther hell can I "kick" him off for the time being I tried reasoning it out with him but its like playing chess with a pigeon, he's studying to be an engineer, and I just cant win an argument with him, so i need to step it up a level... I have in the past used the aireplay method by sending deauth packets but it only helped so much, is there another way of either kicking a peer of the local wifi or decreasing the lag spikes while in session or even splitting the bandwidth equally in 2 or 3,etc What do I do p.s. sorry if off topic, if it is not appropriate, just say which website will be able to help or assist me...

  Read the article

• Website hosted on IIS is not accessbile

  - by Tola Odejayi

  I have two sites set up in IIS on a remote machine RM; one on regular port 80, and the other on port 5773. From my local machine LM, I can access the site on 80, but I cannot access the one on 5773; I get a status code of 502 and an error code of 10060 (A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond) when I try to do this. I can access the 5773 site via IIS when I am logged into RM (i.e. by right clicking on a page on the site and going 'Browse'). I can also access pages on the 5773 site via a browser, again when I am logged into RM. I just can't do the same via a browser when I am logged into LM. I have ensured that port 5773 is open for outgoing traffic on LM. Could the problem be that I also need to ensure that port 5773 is open for inbound traffic on RM?

  Read the article

• Xen 4.1 host (dom0) with blktap disks ("tap:aio:") not connecting

  - by Manwe

  Problem using blktap with xen-4.1 running Ubuntu Precise stock kernel with dom0 xen-4.1. I get: [ 5.580106] XENBUS: Waiting for devices to initialise: 295s...290s. ... [ 300.580288] XENBUS: Timeout connecting to device: device/vbd/51713 (local state 3, remote state 1) And some syslog lines: May 17 13:07:30 localhost logger: /etc/xen/scripts/blktap: add XENBUS_PATH=backend/tap/10/51713 May 17 13:07:31 localhost logger: /etc/xen/scripts/blktap: Writing backend/tap/10/51713/hotplug-status connected to xenstore. with tap:aio: disk lines. file:/ works. disk = [ 'tap:aio:/data/root.img,xvda1,w', ] Problem exists with lucid and precises domU kernels and both guests work in Ubuntu hardy dom0 Host 64bit 2.6.24-28-xen xen-3.3 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise

  Read the article

• Can't use command line – "command not found" after editing PATH

  - by MEM

  I'm running OS X Mavericks and was trying to install MAMP PRO 2.2. I was trying to configure the PATH variable to have the PHP binaries of MAMP PRO. I added the following line on my ~/.bash_profile file: export PATH=/Applications/MAMP PRO/bin/php/php5.5.3/bin:$PATH As you may notice, since I have MAMP PRO and not just MAMP, I've added a space. As a consequence, I know have the following error each time I run the terminal: -bash: export: `PRO/bin/php/php5.5.3/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin': not a valid identifier Worst: I can't get any command to run, like: ls, clear etc. I always get: "command not found" I don't even know the absolute path for ls. How can I make the commands work again, so that I can properly fix the path I was trying to setup on the .bash_profile file?

  Read the article

• Update the remote of a git branch after name changing

  - by Dror

  Consider the following situation. A remote repository has two branches master and b1. In addition it has two clones repo1 and repo2 and both have b1 checked out. At some point, in repo1 the name of b1 was changed. As far as I can tell, the following is the right procedure to change the name of b1: $ git branch b1 b2 # changes the name of b1 to b2 $ git push remote :b1 # delete b1 remotely $ git push --set-upstream origin b2 # create b2 remotely and direct the local branch to track the remote 1 Now, afterwards, in repo2 I face a problem. git pull doesn't pull the changes from the branch (which is now called remotely b2). The error returned is: Your configuration specifies to merge with the ref 'b1' from the remote, but no such ref was fetched. What is the right way to do this? Both the renaming part and the updating in other clones?

  Read the article

• ssh: which side is running the SOCKS proxy?

  - by Barry Brown

  When I set up a tunnel using dynamic forwarding (ssh -D), which side is running the SOCKS proxy? That is, is the proxy running on the local end (client) or the remote end (server)? Here's the situation: I want to set up several tunnels chained together using -L. Should the -D tunnel be the last one in the chain or the first one? Edit: I found the answer to the second paragraph on Super User (the -D tunnel should be at the remotest end). But I'd still like to know where the proxy code is running.

  Read the article

• Automatically cycle numerous or large files to the trash

  - by minameismud

  I've been tasked with fixing a vendor's program that, under certain conditions, dumps gigs of junk files into a log directory. It ends up filling users' machines. My task is to figure out how to make it stop without any source code or additional running processes, and without making the program kasplode. In other words, I'm looking to use a feature of the file system to control the growth. One idea I had was to make a hard link from that folder to NUL, as you might with /dev/null in the linux world. However, my attempts to use the mklink program to create a junction result in a message that says Local volumes are required to complete the operation. Any ideas on how to complete the junction, or other ideas to solve the problem?

  Read the article

• Why can't tuxboot and ubuntu play well together?

  - by mmr

  I'm trying to get clonezilla to run off of a usb stick, and it seems that the right way to do that is via tuxboot. Tuxboot is not compilable on ubuntu. I used git to get it from the repository, and then when I run the 'install' script (because building it is apparently not allowed, since the build script just tries to install windows things). Qmake-linux wants my qmake executable to be in the same directory as the stuff I pulled down, and let's just say that if there's a way to do this easily, I ain't seein' it. So then I download the linux file, the most recent of which is tuxboot-linux-25. Try to run it, get a failure that libpng12.so.0 isn't found. OK, then I go to install that via the instructions I found on the web but firefox seems to have already deleted from my history (yay!) Then I add the /usr/local/lib directory to ldconfig via emacs (had to install that too, of course): http://ubuntuforums.org/showthread.php?t=369848 I still get the errors that libpng12.so.0 cannot be opened because 'No such file or directory'. ldconfig -p | grep libpng shows that the library is there, but it still doesn't seem to be findable. What to do next? (for the record, doing this in windows is painless-- download, click, and it's done. But I'm trying to be all linuxy and get away from Windows for this...)

  Read the article

• How do I negotiate for colo space?

  - by randy melder

  I guess this isn't a technical question, but it definitely is something IT teams deal with, so here goes: I'm looking at getting a rack at a local colocation facility. I'm weighing the options versus building out in a cloud platform. We are REALLY low bandwidth and power. There's a total of six hosts for the total operation. You can assume we use <= 10 amps of power and <= 2Mbps 95th percentile. Do you have any advice for getting the best deal?

  Read the article

• Why does 12.04 try but fail to hibernate, even after I enabled hibernation?

  - by Roger Davis

  Regarding the below (-----) info from another post, my system will try (as is said below) to hibernate, but it won't get all the way there. Hard drive activity stops, but it does not shut down. If I turn the power off, then back on, it will start, but I have to "restore previous session" in the browser and other open apps don't restart, with the accompanying hassle. So because it tries, will the suggested fix then cause it to work correctly, or is the literal "try" not really what he means?!? PLEASE NOTE - this is a desktop system, not a laptop. Before enabling hibernation, please try to test whether it works correctly by running pm-hibernate in a terminal. The system will try to hibernate. If you are able to start the system again then you are more or less safe to add an override. To do so, start editing sudo nano /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla Fill it with this [Re-enable hibernate by default] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes Save by pressing Ctrl-O and exit nano by pressing Ctrl-X Restart and hibernation is back!

  Read the article

• Friday tips #2

  - by Chris Kawalek

  Welcome to our second Friday tips blog! You can ask us questions using the hash tag #AskOracleVirtualization on Twitter and we'll do our best to answer them. Today we've got a VDI related question on linked clones: Question: I want to use linked clones with Oracle Virtual Desktop Infrastructure. What are my options? Answer by John Renko, Consulting Developer, Oracle: First, linked clones are available with the Oracle VirtualBox hypervisor only. Second, your choice of storage will affect the rest of your architecture. If you are using a SAN presenting ISCSI LUNS, you can have linked clones with a Oracle Enterprise Linux based hypervisor running VirtualBox. OEL will use OCFS2 to allow VirtualBox to create the linked clones. Because of the OCFS2 requirement, a Solaris based VirtualBox hypervisor will not be able to support linked clones on remote ISCSI storage. If you using the local storage option on your hypervisors, you will have linked clones with Solaris or Linux based hypervisors running VirtualBox. In all cases, Oracle Virtual Desktop Infrastructure makes the right selection for creating clones - sparse or linked - behind the scenes. Plan your architecture accordingly if you want to ensure you have the higher performing linked clones.

  Read the article

• Is the hosts file ignored in windows if DNS Client service is running?

  - by Mnebuerquo

  I've seen a number of articles about how to edit the hosts file in Windows 7, but it's all about how to open notepad as administrator, not the actual behavior of the dns lookups afterward. I've read that the hosts file is ignored in XP SP2 if DNS Client service is running. I have tried this on my XP machine and it seems to be true. I can see how it is a security danger to have a hosts file that user programs could modify. If it could write to hosts, then any malware could spoof dns locally with minimal difficulty. I'm trying to use the hosts file for testing stuff on my local network without it going to the live site on the internet. At the same time I want to be able to use dns on the normal internet. Mostly though I just want to understand the rules on the newer windows systems. Thanks!

  Read the article

• How do I securely share / allow access to a drive?

  - by sleske

  To simplify backing up a laptop (Windows Vista), I'm planning on sharing its C: drive (with password protection) and using that to back it up from another computer. What are the security implications of this? If I share C: with a reasonable password, how big is the risk of compromise if the system is e.g. inadvertently used on a public WLAN or similar? Background: I'm planning to use [Areca Backup][1] to back up two systems (Windows XP and Vista). My current plan is to install Areca on the XP box, and share the Vista system's C: as a shared folder, so the XP system can read it. Then I can set up the drive as a network drive and have Areca read it like a local drive. Of course, if you can think of a more elegant way of doing this, I'm open to suggestions.

  Read the article

• Windows: "net use" equivalent that shows the username used to mount a share?

  - by Jeroen Wiert Pluimers

  Sometimes you need to use different credentials to map different shares, for instance net use z: \\myserver\myshare /user:mydomain\myusername mypassword You can use net use to show you the shares that are mapped, but it does not show the mydomain\myusername. What can I use to show that information? I'm looking for output like this from the imaginary command NetUseX: H:\>NetUseX New connections will be remembered. Status Local Remote Username Network ---------------------------------------------------------------------------------------------------------- OK D: \\MyServer1234\SomeData MyServer1234\MyUserA Microsoft Windows Network Unavailable E: \\MyServer4321\SomeApps MyDomain\MyUserB Microsoft Windows Network OK H: \\MyServer4321\HomeDAta MyDomain\MyUserB Microsoft Windows Network Disconnected W: \\MyServer6789\WorkData MyDomain\MyUserB Microsoft Windows Network OK \\MyServer9876\Shortcuts MyServer9876\MyUserC Microsoft Windows Network The command completed successfully.

  Read the article

• Configure SMTP server windows

  - by Jake

  I am configuring a local network and for some reason I can't get server to send an email. I already install the SMTP server and configured using this tutorial http://www.itsolutionskb.com/2008/11/installing-and-configuring-windows-server-2008-smtp-server/ but when I try to send an email using code, the email gets pickedup from mailroot/pickup and dropped in mailroot/queue and stays in queue forever, it never goes anywhere, I even tried dropping a basic mail.txt file with this in it: to:[email protected] from:[email protected] subject:This is a test. this is a test. still the same thing happens. Is the smtp server not configured right, is their something else I am missing, because this is my first time setting up an smtp server

  Read the article

• Connection String Incorrectly Formatted [migrated]

  - by Randy E

  I'm running into some issues. Every time I launch into debug mode and hit the "Create User" button, I'm getting an exception being thrown that is due to the Connection String either being in the wrong syntax or just wrong. Using Visual Studio 2010, project is .NET 3.5 with SQL 2008 Express. This is just a personal project that I'm testing some other things with, I know this generally isn't the recommended format but for a personal small project, I don't see the point in doing it any other way. The things I'm testing actually work :) Data Source=.\SQLEXPRESS;AttachDbFilename=|Data Directory|ASPAppDatabase.mdf;Integrated Security=True;User Instance=True That doesn't work. Data Source=.\SQLEXPRESS;AttachDbFilename="|Data Directory|ASPAppDatabase.mdf";Integrated Security=True;User Instance=True Neither does that. Data Source=.\SQLEXPRESS;AttachDbFilename='|Data Directory|ASPAppDatabase.mdf';Integrated Security=True;User Instance=True And again, neither does that :/ However, rather than using "|Data directory| if I use the full path to the local DB file it works just fine and no exception is thrown, and I can read and write as I need. And just to cover all my bases, here is the button click event that creates the User. protected void btnAddUser_Click(object sender, EventArgs e) { Membership.CreateUser(txtUserName.Text, txtPassword.Text); btnLogin_Click(sender, e); } So, what am I missing in regards to the |Data Directory|? Here is an example of the above not working correctly..taken directly from web.config. <add name="ASPAppDatabaseConnection" connectionString='Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPAppDatabase.mdf;Integrated Security=True;User Instance=True'/>

  Read the article

• Shared volume for data (multiple MDF) and another shared volume for logs (multiple LDF)

  - by hagensoft

  I have 3 instances of SQL Server 2008, each on different machines with multiple databases on each instance. I have 2 separate LUNS on my SAN for MDF and LDF files. The NDX and TempDB files run on the local drive on each machine. Is it O.K. for the 3 instances to share a same volume for the data files and another volume for the log files? I don't have thin provisioning on the SAN so I would like to not constaint disk space creating multiple volumes because I was adviced that I should create a volume (drive letter) for each instance, if not for each database. I am aware that I should split my logs and data files at least. No instance would share the actual database files, just the space on drive. Any help is appretiated.

  Read the article

• How to force rsync to use destination directory as root

  - by thepurplepixel

  I have a simple script to one-way-sync files/folders within a directory: #!/bin/bash HOST='<hostname>' USER='<username>' DIR='/downloads/' SOURCE='/srv/torrents' rsync -e "ssh -l $USER" --remove-source-files -h -4 -r --stats --progress -i $SOURCE $HOST:$DIR find $SOURCE -type d -empty -prune -exec rmdir -p \{\} \; However, when this rsync operation runs, it creates a folder, torrents in /downloads on the destination machine. How can I force rsync to put all folders & files from /srv/torrents (remote) into /downloads/ (local) instead of creating /downloads/torrents as a separate directory?

  Read the article

• Git can no longer open emacs as its editor

  - by mwilliams

  I'm running Git version 1.7.3.2 that I built from source, zsh is my shell, and emacs is my editor. Recently I started seeing the following: /usr/local/Cellar/git/1.7.3.2/libexec/git-core/git-sh-setup: line 106: emacs: command not found Could not execute editor My zshrc looks like the following so I can use the Cocoa build and the console binary provided with it. EMACS_HOME="/Applications/Emacs.app/Contents/MacOS" function e() { PATH=$EMACS_HOME/bin:$PATH $EMACS_HOME/Emacs -nw $@ } function ec() { PATH=$EMACS_HOME/bin:$PATH emacsclient -t $@ } function es() { e --daemon=$1 && ec -s $1 } function el() { ps ax|grep Emacs } function ek() { $EMACS_HOME/bin/emacsclient -e '(kill-emacs)' -s $1 } function ecompile() { e -eval "(setq load-path (cons (expand-file-name \".\") load-path))" \ -batch -f batch-byte-compile $@ } alias emacs=e alias emacsclient=ec And I also have export EDITOR="emacs" and have tried adding export GIT_EDITOR="emacs" (and swapping that out with "e") But whatever I try I can't get git to open emacs whenever I need to do a commit or an interactive rebase, etc etc...

  Read the article

• Why do I get disk I/O errors booting the 3.2 kernel on a xen vps server?

  - by Doug

  I have a xen vps, which I just upgraded to the new LTS 12 Precise Pangolin. However, I see this error on booting: [ 12.848076] end_request: I/O error, dev xvda, sector 12841 [ 12.848093] end_request: I/O error, dev xvda, sector 12841 [ 12.848103] Buffer I/O error on device xvda1, logical block 1605 [ 12.848110] lost page write due to I/O error on xvda1 [ 12.848129] Aborting journal on device xvda1. Results in / being mounted read-only. Reboot: [ 3.087257] EXT3-fs (xvda1): warning: ext3_clear_journal_err: Marking fs in need of filesystem check. [ 3.087677] EXT3-fs (xvda1): recovery complete [ 3.088514] EXT3-fs (xvda1): mounted filesystem with ordered data mode Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. fsck from util-linux 2.20.1 PRGMRDISK1 contains a file system with errors, check forced. Checking disk drives for errors. This may take several minutes. Press C to cancel all checks in progress PRGMRDISK1: ***** REBOOT LINUX ***** PRGMRDISK1: 371152/6001184 files (2.8% non-contiguous), 4727949/12000000 blocks mountall: fsck / [308] terminated with status 3 mountall: System must be rebooted: / [ 151.566949] Restarting system. Name ID Mem VCPUs State Time(s) shadowmint 236 2048 1 --p--- 0.0 Reboot - back to 1. This is definitely an issue with the 3.2 kernel, because booting the 3.0.0 or 2.6.38 kernel series make this issue magically disappear. I'm certain this is some kind of weird xen thing, but no idea. Anyone? Anyhow, until this is resolve I strongly recommend against upgrading if you're running a xen server.

  Read the article

• Make the most of yourself and your team during Ramadan

  - by swalker

  Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} To remain competitive, you and your staff need training. The forthcoming Ramadan period adds even more restrictions to those like project deadlines, travel approval and increasing workloads. With Training On Demand these interferences that prevent the attendance of training courses disappear: you and your staff can learn any place, any time. You can find more information here. For assistance with bookings contact your local Oracle University Service Desk. Stay Connected to Oracle University: LinkedIn OracleMix Twitter Facebook Google+

  Read the article

• MailServer Setting

  - by Ashian

  Hi I have a mail server on windows 2003 ( MailEnable) I setup mail server to authonticate users before sending mail. (This mail server requires authentication when attempting to send to a non-local e-mail address) but from yesterday , without change any setting I got many Message Delivery Delay from mail server for email address that I never try to sending email: I afraid that I someone try to sending Spam from my mail server,How can I check this possiblity ? and fix the problem. Thanks MailEnable: Message delivery has been delayed. Message is waiting at *.info for delivery to mailin-03.mx.aol.com. The message will be retried for another 29 hours. Reason: Mail Server for aol.com could not accept your email at this time. MailEnable will keep trying to deliver this message and will notify you of any progress. The remote mail server returned the error: 421-: (DNS:NR)

  Read the article

• Transport rule - Exchange 2010

  - by Jeff

  I have two transport rules on my exchange server. One is: > Apply rule to messages: From users that are 'outside the organization' > and when any of the recipients in the To or Cc fields is a member of > '[email protected]' Forward the messageto sender's manager > for moderation The second is: Apply rule to messages from a member of '[email protected]' and sent to users that are 'outside the organization' forward the message to the sender's manager for moderation. nointernetmail is a distribution group, and each user has the managed by set to there local manager. However these transport rules do not work, internet mail is still sent and received without issue. I have read various tutorials / articles of how to do this on sites such as msexchangeblog and even microsoft technet, however even after following the guides I am still unable to have this function properly. Any help is appreciated.

  Read the article

• Upgrading to x64 results in HTTP 500

  - by Dour High Arch

  I upgraded my development machine to 64-bit Win7, and now when I try to connect to a local ASP.Net project I get: HTTP Error 500 ... Calling LoadLibraryEx on ISAPI filter "C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll" failed There are several puzzling things about this; the ASP.Net project was a .Net 2.0 ASMX so it was using C:\Windows\Microsoft.NET\Framework\v2.0.50727. If it updated to x64 without asking me, should it not use C:\Windows\Microsoft.NET\Framework64\v2.0.50727\? Where is C:\Windows\Microsoft.NET\Framework\v4.0.30319\ coming from? I opened IIS Manager and the selected .Net Framework version for my machine is 2.0.50727. Framework version for my default application pool is the same. I am developing in VS2008, which does not even have an option for targeting .Net 4.0.

  Read the article

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >