Search Results

Search found 1096 results on 44 pages for '0000'.

Page 41/44 | < Previous Page | 37 38 39 40 41 42 43 44  | Next Page >

• Sound issues after trying everything

  - by Lerp

  I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

  Read the article

• HP Pavilion tx2000 - Wifi adapter no longer works after moving from 12.04 to a 12.10 clean install

  - by Marek L.

  I have a HP Pavilion tx2000 that I have been running Ubuntu 12.04 on for a couple of months without any problems (wifi worked great) until yesterday when my hard drive failed. I replaced the hard drive and decided to install Ubuntu 12.10. Unlike 12.04, the wifi did not work after the installation finished and all the updates where installed (over Ethernet). The network drop down in the top right didn't even show a wireless option. I Googled about for a bit and found some solutions that seemed like they might work. Unfortunately they did not. Here is what I tried: sudo apt-get remove bcmwl-kernel-source sudo apt-get install b43-fwcutter sudo apt-get install firmware-b43-lpphy-installer Restart the computer. And the wifi still didn't work. At which point I panicked a bit and tried to undo the previous commands by running: sudo apt-get remove b43-fwcutter firmware-b43-lpphy-installer sudo apt-get install bcmwl-kernel-source Restart the computer. The wifi still doesn't work. This is where I stopped because I have no idea what I am doing and don't want to mess something up. The network drop down still doesn't show a wireless option and the hardware wifi switch on the laptop is amber (it turns blue when the wifi is on). Using the hardware switch does not change the color. Output from: sudo lspci ... 08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01) ... Output from: sudo lshw -class network *-network UNCLAIMED description: Network controller product: BCM4322 802.11a/b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1100000-d1103fff ... Output from: sudo rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes UPDATE: After writing up this question tried the following command: sudo rfkill unblock all At first it didn't do anything but after running it about four times, sudo rfkill list all now returns: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no But the network menu still does not have a wireless option and the hardware switch still glows amber. Pushing the hardware switch turns the hard block back on and I have to run sudo rfkill unblock all multiple times again to turn it off. Any help is appreciated! Update 2: Full output from sudo lspci -nn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)

  Read the article

• The Joy Of Hex

  - by Jim Giercyk

  While working on a mainframe integration project, it occurred to me that some basic computer concepts are slipping into obscurity. For example, just about anyone can tell you that a 64-bit processor is faster than a 32-bit processer. A grade school child could tell you that a computer “speaks” in ‘1’s and ‘0’s. Some people can even tell you that there are 8 bits in a byte. However, I have found that even the most seasoned developers often can’t explain the theory behind those statements. That is not a knock on programmers; in the age of IntelliSense, what reason do we have to work with data at the bit level? Many computer theory classes treat bit-level programming as a thing of the past, no longer necessary now that storage space is plentiful. The trouble with that mindset is that the world is full of legacy systems that run programs written in the 1970’s.  Today our jobs require us to extract data from those systems, regardless of the format, and that often involves low-level programming. Because it seems knowledge of the low-level concepts is waning in recent times, I thought a review would be in order.       CHARACTER: See Spot Run HEX: 53 65 65 20 53 70 6F 74 20 52 75 6E DECIMAL: 83 101 101 32 83 112 111 116 32 82 117 110 BINARY: 01010011 01100101 01100101 00100000 01010011 01110000 01101111 01110100 00100000 01010010 01110101 01101110 In this example, I have broken down the words “See Spot Run” to a level computers can understand – machine language.     CHARACTER:  The character level is what is rendered by the computer.  A “Character Set” or “Code Page” contains 256 characters, both printable and unprintable.  Each character represents 1 BYTE of data.  For example, the character string “See Spot Run” is 12 Bytes long, exclusive of the quotation marks.  Remember, a SPACE is an unprintable character, but it still requires a byte.  In the example I have used the default Windows character set, ASCII, which you can see here:  http://www.asciitable.com/ HEX:  Hex is short for hexadecimal, or Base 16.  Humans are comfortable thinking in base ten, perhaps because they have 10 fingers and 10 toes; fingers and toes are called digits, so it’s not much of a stretch.  Computers think in Base 16, with numeric values ranging from zero to fifteen, or 0 – F.  Each decimal place has a possible 16 values as opposed to a possible 10 values in base 10.  Therefore, the number 10 in Hex is equal to the number 16 in Decimal.  DECIMAL:  The Decimal conversion is strictly for us humans to use for calculations and conversions.  It is much easier for us humans to calculate that [30 – 10 = 20] in decimal than it is for us to calculate [1E – A = 14] in Hex.  In the old days, an error in a program could be found by determining the displacement from the entry point of a module.  Since those values were dumped from the computers head, they were in hex. A programmer needed to convert them to decimal, do the equation and convert back to hex.  This gets into relative and absolute addressing, a topic for another day.  BINARY:  Binary, or machine code, is where any value can be expressed in 1s and 0s.  It is really Base 2, because each decimal place can have a possibility of only 2 characters, a 1 or a 0.  In Binary, the number 10 is equal to the number 2 in decimal. Why only 1s and 0s?  Very simply, computers are made up of lots and lots of transistors which at any given moment can be ON ( 1 ) or OFF ( 0 ).  Each transistor is a bit, and the order that the transistors fire (or not fire) is what distinguishes one value from  another in the computers head (or CPU).  Consider 32 bit vs 64 bit processing…..a 64 bit processor has the capability to read 64 transistors at a time.  A 32 bit processor can only read half as many at a time, so in theory the 64 bit processor should be much faster.  There are many more factors involved in CPU performance, but that is the fundamental difference.    DECIMAL HEX BINARY 0 0 0000 1 1 0001 2 2 0010 3 3 0011 4 4 0100 5 5 0101 6 6 0110 7 7 0111 8 8 1000 9 9 1001 10 A 1010 11 B 1011 12 C 1100 13 D 1101 14 E 1110 15 F 1111   Remember that each character is a BYTE, there are 2 HEX characters in a byte (called nibbles) and 8 BITS in a byte.  I hope you enjoyed reading about the theory of data processing.  This is just a high-level explanation, and there is much more to be learned.  It is safe to say that, no matter how advanced our programming languages and visual studios become, they are nothing more than a way to interpret bits and bytes.  There is nothing like the joy of hex to get the mind racing.

  Read the article

• Wierd Haml 3 error with ruby 1.9.1 and rails 3

  - by Micke

  I'm getting this wierd error on my windows 7 computer when i am using the html2haml command with Haml 3 and Rails on ruby 1.9: -- control frame ---------- c:0017 p:-9593720 s:0052 b:0052 l:000051 d:000051 TOP c:0016 p:---- s:0050 b:0050 l:000049 d:000049 CFUNC :require c:0015 p:0026 s:0046 b:0046 l:000045 d:000045 TOP C:/Ruby/lib/ruby/gems/1.9.1/gems/hpricot-0.8.2-x86-mswin32/lib/hpricot.rb:20 c:0014 p:---- s:0044 b:0044 l:000043 d:000043 FINISH c:0013 p:---- s:0042 b:0042 l:000041 d:000041 CFUNC :require c:0012 p:0095 s:0038 b:0038 l:000037 d:000037 TOP C:/Ruby/lib/ruby/gems/1.9.1/gems/haml-3.0.0/lib/haml/html.rb:101 c:0011 p:---- s:0036 b:0036 l:000035 d:000035 FINISH c:0010 p:---- s:0034 b:0034 l:000033 d:000033 CFUNC :require c:0009 p:0022 s:0030 b:0030 l:000029 d:000029 METHOD C:/Ruby/lib/ruby/gems/1.9.1/gems/haml-3.0.0/lib/haml/exec.rb:559 c:0008 p:0050 s:0023 b:0023 l:000022 d:000022 METHOD C:/Ruby/lib/ruby/gems/1.9.1/gems/haml-3.0.0/lib/haml/exec.rb:41 c:0007 p:0013 s:0020 b:0020 l:000019 d:000019 METHOD C:/Ruby/lib/ruby/gems/1.9.1/gems/haml-3.0.0/lib/haml/exec.rb:22 c:0006 p:0078 s:0016 b:0016 l:000015 d:000015 TOP C:/Ruby/lib/ruby/gems/1.9.1/gems/haml-3.0.0/bin/html2haml:7 c:0005 p:---- s:0013 b:0013 l:000012 d:000012 FINISH c:0004 p:---- s:0011 b:0011 l:000010 d:000010 CFUNC :load c:0003 p:0127 s:0007 b:0007 l:000e54 d:0020c0 EVAL C:/Ruby/bin/html2haml:19 c:0002 p:---- s:0004 b:0004 l:000003 d:000003 FINISH c:0001 p:0000 s:0002 b:0002 l:000e54 d:000e54 TOP --------------------------- -- Ruby level backtrace information----------------------------------------- C:/Ruby/lib/ruby/gems/1.9.1/gems/hpricot-0.8.2-x86-mswin32/lib/hpricot.rb:20:in `require' C:/Ruby/lib/ruby/gems/1.9.1/gems/hpricot-0.8.2-x86-mswin32/lib/hpricot.rb:20:in `<top (required)>' C:/Ruby/lib/ruby/gems/1.9.1/gems/haml-3.0.0/lib/haml/html.rb:101:in `require' C:/Ruby/lib/ruby/gems/1.9.1/gems/haml-3.0.0/lib/haml/html.rb:101:in `<top (required)>' C:/Ruby/lib/ruby/gems/1.9.1/gems/haml-3.0.0/lib/haml/exec.rb:559:in `require' C:/Ruby/lib/ruby/gems/1.9.1/gems/haml-3.0.0/lib/haml/exec.rb:559:in `process_result' C:/Ruby/lib/ruby/gems/1.9.1/gems/haml-3.0.0/lib/haml/exec.rb:41:in `parse' C:/Ruby/lib/ruby/gems/1.9.1/gems/haml-3.0.0/lib/haml/exec.rb:22:in `parse!' C:/Ruby/lib/ruby/gems/1.9.1/gems/haml-3.0.0/bin/html2haml:7:in `<top (required)>' C:/Ruby/bin/html2haml:19:in `load' C:/Ruby/bin/html2haml:19:in `<main>' [NOTE] You may encounter a bug of Ruby interpreter. Bug reports are welcome. For details: http://www.ruby-lang.org/bugreport.html This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. And then ruby crashes. I have reinstalled all the gems but nothing will help. Please help me

  Read the article

• ffmpeg - How to determine if -movflags faststart is enabled? PHP

  - by IIIOXIII

  While I am able to encode an mp4 file which I can plan on my local windows machine, I am having trouble encoding files to mp4 which are readable when streaming by safari, etc. After a bit of reading, I believe my issue is that I must move the metadata from the end of the file to the beginning in order for the converted mp4 files to be streamable. To that end, I am trying to find out if the build of ffmpeg that I am currently using is able to use the -movflags faststart option through php - as my current outputted mp4 files are not working when streamed online. This is the way I am now echoing the -help, -formats, -codecs, but I am not seeing anything about -movflags faststart in any of the lists: exec($ffmpegPath." -help", $codecArr); for($ii=0;$ii<count($codecArr);$ii++){ echo $codecArr[$ii].'</br>'; } Is there a similar method of determining if -movflags fastart is available to my ffmpeg build? Any other way? Should it be listed with any of the previously suggested commands? -help/-formats? Can someone that knows it is enabled in their version of ffmpeg check to see if it is listed under -help or -formats, etc.? TIA. EDIT: COMPLETE CONSOLE OUTPUT FOR BOTH THE CONVERSION COMMAND AND -MOVFLAGS COMMAND BELOW: COMMAND: ffmpeg_new -i C:\vidtests\Wildlife.wmv -s 640x480 C:\vidtests\Wildlife.mp4 OUTPUT: ffmpeg version N-54207-ge59fb3f Copyright (c) 2000-2013 the FFmpeg developers built on Jun 25 2013 21:55:00 with gcc 4.7.3 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-av isynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enab le-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetyp e --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --ena ble-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-l ibopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libsp eex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo- amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs -- enable-libxvid --enable-zlib libavutil 52. 37.101 / 52. 37.101 libavcodec 55. 17.100 / 55. 17.100 libavformat 55. 10.100 / 55. 10.100 libavdevice 55. 2.100 / 55. 2.100 libavfilter 3. 77.101 / 3. 77.101 libswscale 2. 3.100 / 2. 3.100 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 3.100 / 52. 3.100 [asf @ 00000000002ed760] Stream #0: not enough frames to estimate rate; consider increasing probesize Guessed Channel Layout for Input Stream #0.0 : stereo Input #0, asf, from 'C:\vidtests\Wildlife.wmv' : Metadata: SfOriginalFPS : 299700 WMFSDKVersion : 11.0.6001.7000 WMFSDKNeeded : 0.0.0.0000 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation IsVBR : 0 DeviceConformanceTemplate: AP@L3 Duration: 00:00:30.09, start: 0.000000, bitrate: 6977 kb/s Stream #0:0(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, fltp , 192 kb/s Stream #0:1(eng): Video: vc1 (Advanced) (WVC1 / 0x31435657), yuv420p, 1280x7 20, 5942 kb/s, 29.97 tbr, 1k tbn, 1k tbc [libx264 @ 00000000002e6980] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 [libx264 @ 00000000002e6980] profile High, level 3.0 [libx264 @ 00000000002e6980] 264 - core 133 r2334 a3ac64b - H.264/MPEG-4 AVC cod ec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 r ef=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed _ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pski p=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 deci mate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_ adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=2 5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.6 0 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'C:\vidtests\Wildlife.mp4': Metadata: SfOriginalFPS : 299700 WMFSDKVersion : 11.0.6001.7000 WMFSDKNeeded : 0.0.0.0000 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation IsVBR : 0 DeviceConformanceTemplate: AP@L3 encoder : Lavf55.10.100 Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 6 40x480, q=-1--1, 30k tbn, 29.97 tbc Stream #0:1(eng): Audio: aac (libvo_aacenc) ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Stream mapping: Stream #0:1 -> #0:0 (vc1 -> libx264) Stream #0:0 -> #0:1 (wmav2 -> libvo_aacenc) Press [q] to stop, [?] for help frame= 53 fps= 49 q=29.0 size= 0kB time=00:00:00.13 bitrate= 2.9kbits/ frame= 63 fps= 40 q=29.0 size= 0kB time=00:00:00.46 bitrate= 0.8kbits/ frame= 74 fps= 35 q=29.0 size= 0kB time=00:00:00.83 bitrate= 0.5kbits/ frame= 85 fps= 32 q=29.0 size= 0kB time=00:00:01.20 bitrate= 0.3kbits/ frame= 95 fps= 30 q=29.0 size= 0kB time=00:00:01.53 bitrate= 0.3kbits/ frame= 107 fps= 28 q=29.0 size= 0kB time=00:00:01.93 bitrate= 0.2kbits/ Queue input is backward in time [mp4 @ 00000000003ef800] Non-monotonous DTS in output stream 0:1; previous: 7616 , current: 7063; changing to 7617. This may result in incorrect timestamps in th e output file. frame= 118 fps= 28 q=29.0 size= 113kB time=00:00:02.30 bitrate= 402.6kbits/ frame= 129 fps= 26 q=29.0 size= 219kB time=00:00:02.66 bitrate= 670.7kbits/ frame= 141 fps= 26 q=29.0 size= 264kB time=00:00:03.06 bitrate= 704.2kbits/ frame= 152 fps= 25 q=29.0 size= 328kB time=00:00:03.43 bitrate= 782.2kbits/ frame= 163 fps= 25 q=29.0 size= 431kB time=00:00:03.80 bitrate= 928.1kbits/ frame= 174 fps= 24 q=29.0 size= 568kB time=00:00:04.17 bitrate=1116.3kbits/ frame= 190 fps= 25 q=29.0 size= 781kB time=00:00:04.70 bitrate=1359.9kbits/ frame= 204 fps= 25 q=29.0 size= 1006kB time=00:00:05.17 bitrate=1593.1kbits/ frame= 218 fps= 25 q=29.0 size= 1058kB time=00:00:05.63 bitrate=1536.8kbits/ frame= 229 fps= 25 q=29.0 size= 1093kB time=00:00:06.00 bitrate=1490.9kbits/ frame= 239 fps= 24 q=29.0 size= 1118kB time=00:00:06.33 bitrate=1444.4kbits/ frame= 251 fps= 24 q=29.0 size= 1150kB time=00:00:06.74 bitrate=1397.9kbits/ frame= 265 fps= 24 q=29.0 size= 1234kB time=00:00:07.20 bitrate=1402.3kbits/ frame= 278 fps= 25 q=29.0 size= 1332kB time=00:00:07.64 bitrate=1428.3kbits/ frame= 294 fps= 25 q=29.0 size= 1403kB time=00:00:08.17 bitrate=1405.7kbits/ frame= 308 fps= 25 q=29.0 size= 1547kB time=00:00:08.64 bitrate=1466.4kbits/ frame= 323 fps= 25 q=29.0 size= 1595kB time=00:00:09.14 bitrate=1429.5kbits/ frame= 337 fps= 25 q=29.0 size= 1702kB time=00:00:09.60 bitrate=1450.7kbits/ frame= 351 fps= 25 q=29.0 size= 1755kB time=00:00:10.07 bitrate=1427.1kbits/ frame= 365 fps= 25 q=29.0 size= 1820kB time=00:00:10.54 bitrate=1414.1kbits/ frame= 381 fps= 25 q=29.0 size= 1852kB time=00:00:11.07 bitrate=1369.6kbits/ frame= 396 fps= 26 q=29.0 size= 1893kB time=00:00:11.57 bitrate=1339.5kbits/ frame= 409 fps= 26 q=29.0 size= 1923kB time=00:00:12.01 bitrate=1311.8kbits/ frame= 421 fps= 25 q=29.0 size= 1967kB time=00:00:12.41 bitrate=1298.3kbits/ frame= 434 fps= 25 q=29.0 size= 1998kB time=00:00:12.84 bitrate=1274.0kbits/ frame= 445 fps= 25 q=29.0 size= 2018kB time=00:00:13.21 bitrate=1251.3kbits/ frame= 458 fps= 25 q=29.0 size= 2048kB time=00:00:13.64 bitrate=1229.5kbits/ frame= 471 fps= 25 q=29.0 size= 2067kB time=00:00:14.08 bitrate=1202.3kbits/ frame= 484 fps= 25 q=29.0 size= 2189kB time=00:00:14.51 bitrate=1235.5kbits/ frame= 497 fps= 25 q=29.0 size= 2260kB time=00:00:14.94 bitrate=1238.3kbits/ frame= 509 fps= 25 q=29.0 size= 2311kB time=00:00:15.34 bitrate=1233.3kbits/ frame= 523 fps= 25 q=29.0 size= 2429kB time=00:00:15.81 bitrate=1258.1kbits/ frame= 535 fps= 25 q=29.0 size= 2541kB time=00:00:16.21 bitrate=1283.5kbits/ frame= 548 fps= 25 q=29.0 size= 2718kB time=00:00:16.64 bitrate=1337.5kbits/ frame= 560 fps= 25 q=29.0 size= 2845kB time=00:00:17.05 bitrate=1367.1kbits/ frame= 571 fps= 25 q=29.0 size= 2965kB time=00:00:17.41 bitrate=1394.6kbits/ frame= 580 fps= 25 q=29.0 size= 3025kB time=00:00:17.71 bitrate=1398.7kbits/ frame= 588 fps= 25 q=29.0 size= 3098kB time=00:00:17.98 bitrate=1411.1kbits/ frame= 597 fps= 25 q=29.0 size= 3183kB time=00:00:18.28 bitrate=1426.1kbits/ frame= 606 fps= 24 q=29.0 size= 3279kB time=00:00:18.58 bitrate=1445.2kbits/ frame= 616 fps= 24 q=29.0 size= 3441kB time=00:00:18.91 bitrate=1489.9kbits/ frame= 626 fps= 24 q=29.0 size= 3650kB time=00:00:19.25 bitrate=1553.0kbits/ frame= 638 fps= 24 q=29.0 size= 3826kB time=00:00:19.65 bitrate=1594.7kbits/ frame= 649 fps= 24 q=29.0 size= 3950kB time=00:00:20.02 bitrate=1616.3kbits/ frame= 660 fps= 24 q=29.0 size= 4067kB time=00:00:20.38 bitrate=1634.1kbits/ frame= 669 fps= 24 q=29.0 size= 4121kB time=00:00:20.68 bitrate=1631.8kbits/ frame= 682 fps= 24 q=29.0 size= 4274kB time=00:00:21.12 bitrate=1657.9kbits/ frame= 696 fps= 24 q=29.0 size= 4446kB time=00:00:21.58 bitrate=1687.1kbits/ frame= 709 fps= 24 q=29.0 size= 4590kB time=00:00:22.02 bitrate=1707.3kbits/ frame= 719 fps= 24 q=29.0 size= 4772kB time=00:00:22.35 bitrate=1748.5kbits/ frame= 732 fps= 24 q=29.0 size= 4852kB time=00:00:22.78 bitrate=1744.3kbits/ frame= 744 fps= 24 q=29.0 size= 4973kB time=00:00:23.18 bitrate=1756.9kbits/ frame= 756 fps= 24 q=29.0 size= 5099kB time=00:00:23.59 bitrate=1770.8kbits/ frame= 768 fps= 24 q=29.0 size= 5149kB time=00:00:23.99 bitrate=1758.4kbits/ frame= 780 fps= 24 q=29.0 size= 5227kB time=00:00:24.39 bitrate=1755.7kbits/ frame= 797 fps= 24 q=29.0 size= 5377kB time=00:00:24.95 bitrate=1765.0kbits/ frame= 813 fps= 24 q=29.0 size= 5507kB time=00:00:25.49 bitrate=1769.5kbits/ frame= 828 fps= 24 q=29.0 size= 5634kB time=00:00:25.99 bitrate=1775.5kbits/ frame= 843 fps= 24 q=29.0 size= 5701kB time=00:00:26.49 bitrate=1762.9kbits/ frame= 859 fps= 24 q=29.0 size= 5830kB time=00:00:27.02 bitrate=1767.0kbits/ frame= 872 fps= 24 q=29.0 size= 5926kB time=00:00:27.46 bitrate=1767.7kbits/ frame= 888 fps= 24 q=29.0 size= 6014kB time=00:00:27.99 bitrate=1759.7kbits/ frame= 900 fps= 24 q=29.0 size= 6332kB time=00:00:28.39 bitrate=1826.9kbits/ frame= 901 fps= 24 q=-1.0 Lsize= 6717kB time=00:00:30.10 bitrate=1828.0kbits /s video:6211kB audio:472kB subtitle:0 global headers:0kB muxing overhead 0.513217% [libx264 @ 00000000002e6980] frame I:8 Avg QP:21.77 size: 39744 [libx264 @ 00000000002e6980] frame P:433 Avg QP:25.69 size: 11490 [libx264 @ 00000000002e6980] frame B:460 Avg QP:29.25 size: 2319 [libx264 @ 00000000002e6980] consecutive B-frames: 5.4% 78.6% 2.7% 13.3% [libx264 @ 00000000002e6980] mb I I16..4: 21.8% 48.8% 29.5% [libx264 @ 00000000002e6980] mb P I16..4: 0.7% 4.0% 1.3% P16..4: 37.1% 22.2 % 15.5% 0.0% 0.0% skip:19.2% [libx264 @ 00000000002e6980] mb B I16..4: 0.1% 0.5% 0.2% B16..8: 43.5% 7.0 % 2.1% direct: 2.2% skip:44.5% L0:36.4% L1:52.7% BI:10.9% [libx264 @ 00000000002e6980] 8x8 transform intra:62.8% inter:56.2% [libx264 @ 00000000002e6980] coded y,uvDC,uvAC intra: 74.2% 78.8% 44.0% inter: 2 3.6% 14.5% 1.0% [libx264 @ 00000000002e6980] i16 v,h,dc,p: 48% 24% 9% 20% [libx264 @ 00000000002e6980] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 16% 17% 15% 7% 8% 11% 8% 10% 8% [libx264 @ 00000000002e6980] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 17% 15% 7% 10% 11% 8% 7% 7% [libx264 @ 00000000002e6980] i8c dc,h,v,p: 53% 21% 18% 7% [libx264 @ 00000000002e6980] Weighted P-Frames: Y:0.7% UV:0.0% [libx264 @ 00000000002e6980] ref P L0: 62.4% 19.0% 12.0% 6.6% 0.0% [libx264 @ 00000000002e6980] ref B L0: 90.5% 8.9% 0.7% [libx264 @ 00000000002e6980] ref B L1: 97.9% 2.1% [libx264 @ 00000000002e6980] kb/s:1692.37 AND THE –MOVFLAGS COMMAND: C:\XSITE\SITE>ffmpeg_new -i C:\vidtests\Wildlife.mp4 -movflags faststart C:\vidtests\Wildlife_fs.mp4 AND THE –MOVFLAGS OUTPUT ffmpeg version N-54207-ge59fb3f Copyright (c) 2000-2013 the FFmpeg developers built on Jun 25 2013 21:55:00 with gcc 4.7.3 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-av isynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enab le-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetyp e --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --ena ble-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-l ibopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libsp eex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo- amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs -- enable-libxvid --enable-zlib libavutil 52. 37.101 / 52. 37.101 libavcodec 55. 17.100 / 55. 17.100 libavformat 55. 10.100 / 55. 10.100 libavdevice 55. 2.100 / 55. 2.100 libavfilter 3. 77.101 / 3. 77.101 libswscale 2. 3.100 / 2. 3.100 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 3.100 / 52. 3.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'C:\vidtests\Wildlife.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 title : Wildlife in HD encoder : Lavf55.10.100 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball copyright : -¬ 2008 Microsoft Corporation Duration: 00:00:30.13, start: 0.036281, bitrate: 1826 kb/s Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 640x480, 1692 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: handler_name : VideoHandler Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 12 8 kb/s Metadata: handler_name : SoundHandler [libx264 @ 0000000004360620] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 [libx264 @ 0000000004360620] profile High, level 3.0 [libx264 @ 0000000004360620] 264 - core 133 r2334 a3ac64b - H.264/MPEG-4 AVC cod ec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 r ef=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed _ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pski p=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 deci mate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_ adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=2 5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.6 0 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'C:\vidtests\Wildlife_fs.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball encoder : Lavf55.10.100 Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 6 40x480, q=-1--1, 30k tbn, 29.97 tbc Metadata: handler_name : VideoHandler Stream #0:1(eng): Audio: aac (libvo_aacenc) ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Metadata: handler_name : SoundHandler Stream mapping: Stream #0:0 -> #0:0 (h264 -> libx264) Stream #0:1 -> #0:1 (aac -> libvo_aacenc) Press [q] to stop, [?] for help frame= 52 fps=0.0 q=29.0 size= 29kB time=00:00:01.76 bitrate= 133.9kbits/ frame= 63 fps= 60 q=29.0 size= 104kB time=00:00:02.14 bitrate= 397.2kbits/ frame= 74 fps= 47 q=29.0 size= 176kB time=00:00:02.51 bitrate= 573.2kbits/ frame= 87 fps= 41 q=29.0 size= 265kB time=00:00:02.93 bitrate= 741.2kbits/ frame= 101 fps= 37 q=29.0 size= 358kB time=00:00:03.39 bitrate= 862.8kbits/ frame= 113 fps= 34 q=29.0 size= 437kB time=00:00:03.79 bitrate= 943.7kbits/ frame= 125 fps= 33 q=29.0 size= 520kB time=00:00:04.20 bitrate=1012.2kbits/ frame= 138 fps= 32 q=29.0 size= 606kB time=00:00:04.64 bitrate=1069.8kbits/ frame= 151 fps= 31 q=29.0 size= 696kB time=00:00:05.06 bitrate=1124.3kbits/ frame= 163 fps= 30 q=29.0 size= 780kB time=00:00:05.47 bitrate=1166.4kbits/ frame= 176 fps= 30 q=29.0 size= 919kB time=00:00:05.90 bitrate=1273.9kbits/ frame= 196 fps= 31 q=29.0 size= 994kB time=00:00:06.57 bitrate=1237.4kbits/ frame= 213 fps= 31 q=29.0 size= 1097kB time=00:00:07.13 bitrate=1258.8kbits/ frame= 225 fps= 30 q=29.0 size= 1204kB time=00:00:07.53 bitrate=1309.8kbits/ frame= 236 fps= 30 q=29.0 size= 1323kB time=00:00:07.91 bitrate=1369.4kbits/ frame= 249 fps= 29 q=29.0 size= 1451kB time=00:00:08.34 bitrate=1424.6kbits/ frame= 263 fps= 29 q=29.0 size= 1574kB time=00:00:08.82 bitrate=1461.3kbits/ frame= 278 fps= 29 q=29.0 size= 1610kB time=00:00:09.30 bitrate=1416.9kbits/ frame= 296 fps= 30 q=29.0 size= 1655kB time=00:00:09.91 bitrate=1368.0kbits/ frame= 313 fps= 30 q=29.0 size= 1697kB time=00:00:10.48 bitrate=1326.4kbits/ frame= 330 fps= 30 q=29.0 size= 1737kB time=00:00:11.05 bitrate=1286.5kbits/ frame= 345 fps= 30 q=29.0 size= 1776kB time=00:00:11.54 bitrate=1260.4kbits/ frame= 361 fps= 30 q=29.0 size= 1813kB time=00:00:12.07 bitrate=1230.3kbits/ frame= 377 fps= 30 q=29.0 size= 1847kB time=00:00:12.59 bitrate=1201.4kbits/ frame= 395 fps= 30 q=29.0 size= 1880kB time=00:00:13.22 bitrate=1165.0kbits/ frame= 410 fps= 30 q=29.0 size= 1993kB time=00:00:13.72 bitrate=1190.2kbits/ frame= 424 fps= 30 q=29.0 size= 2080kB time=00:00:14.18 bitrate=1201.4kbits/ frame= 439 fps= 30 q=29.0 size= 2166kB time=00:00:14.67 bitrate=1209.4kbits/ frame= 455 fps= 30 q=29.0 size= 2262kB time=00:00:15.21 bitrate=1217.5kbits/ frame= 469 fps= 30 q=29.0 size= 2341kB time=00:00:15.68 bitrate=1223.0kbits/ frame= 484 fps= 30 q=29.0 size= 2430kB time=00:00:16.19 bitrate=1229.1kbits/ frame= 500 fps= 30 q=29.0 size= 2523kB time=00:00:16.71 bitrate=1236.3kbits/ frame= 515 fps= 30 q=29.0 size= 2607kB time=00:00:17.21 bitrate=1240.4kbits/ frame= 531 fps= 30 q=29.0 size= 2681kB time=00:00:17.73 bitrate=1238.2kbits/ frame= 546 fps= 30 q=29.0 size= 2758kB time=00:00:18.24 bitrate=1238.2kbits/ frame= 561 fps= 30 q=29.0 size= 2824kB time=00:00:18.75 bitrate=1233.4kbits/ frame= 576 fps= 30 q=29.0 size= 2955kB time=00:00:19.25 bitrate=1256.8kbits/ frame= 586 fps= 29 q=29.0 size= 3061kB time=00:00:19.59 bitrate=1279.6kbits/ frame= 598 fps= 29 q=29.0 size= 3217kB time=00:00:19.99 bitrate=1318.4kbits/ frame= 610 fps= 29 q=29.0 size= 3354kB time=00:00:20.39 bitrate=1347.2kbits/ frame= 622 fps= 29 q=29.0 size= 3483kB time=00:00:20.78 bitrate=1372.6kbits/ frame= 634 fps= 29 q=29.0 size= 3593kB time=00:00:21.19 bitrate=1388.6kbits/ frame= 648 fps= 29 q=29.0 size= 3708kB time=00:00:21.66 bitrate=1402.3kbits/ frame= 661 fps= 29 q=29.0 size= 3811kB time=00:00:22.08 bitrate=1413.5kbits/ frame= 674 fps= 29 q=29.0 size= 3978kB time=00:00:22.53 bitrate=1446.3kbits/ frame= 690 fps= 29 q=29.0 size= 4133kB time=00:00:23.05 bitrate=1468.4kbits/ frame= 706 fps= 29 q=29.0 size= 4263kB time=00:00:23.58 bitrate=1480.4kbits/ frame= 721 fps= 29 q=29.0 size= 4391kB time=00:00:24.08 bitrate=1493.8kbits/ frame= 735 fps= 29 q=29.0 size= 4524kB time=00:00:24.55 bitrate=1509.4kbits/ frame= 748 fps= 29 q=29.0 size= 4661kB time=00:00:24.98 bitrate=1528.2kbits/ frame= 763 fps= 29 q=29.0 size= 4835kB time=00:00:25.50 bitrate=1553.1kbits/ frame= 778 fps= 29 q=29.0 size= 4993kB time=00:00:25.99 bitrate=1573.6kbits/ frame= 795 fps= 29 q=29.0 size= 5149kB time=00:00:26.56 bitrate=1588.1kbits/ frame= 814 fps= 29 q=29.0 size= 5258kB time=00:00:27.18 bitrate=1584.4kbits/ frame= 833 fps= 29 q=29.0 size= 5368kB time=00:00:27.82 bitrate=1580.2kbits/ frame= 851 fps= 29 q=29.0 size= 5469kB time=00:00:28.43 bitrate=1575.9kbits/ frame= 870 fps= 29 q=29.0 size= 5567kB time=00:00:29.05 bitrate=1569.5kbits/ frame= 889 fps= 29 q=29.0 size= 5688kB time=00:00:29.70 bitrate=1568.4kbits/ Starting second pass: moving header on top of the file frame= 902 fps= 28 q=-1.0 Lsize= 6109kB time=00:00:30.14 bitrate=1659.8kbits /s dup=1 drop=0 video:5602kB audio:472kB subtitle:0 global headers:0kB muxing overhead 0.566600% [libx264 @ 0000000004360620] frame I:8 Avg QP:20.52 size: 39667 [libx264 @ 0000000004360620] frame P:419 Avg QP:25.06 size: 10524 [libx264 @ 0000000004360620] frame B:475 Avg QP:29.03 size: 2123 [libx264 @ 0000000004360620] consecutive B-frames: 3.2% 79.6% 0.3% 16.9% [libx264 @ 0000000004360620] mb I I16..4: 20.7% 52.3% 26.9% [libx264 @ 0000000004360620] mb P I16..4: 0.7% 4.2% 1.1% P16..4: 39.4% 21.4 % 13.8% 0.0% 0.0% skip:19.3% [libx264 @ 0000000004360620] mb B I16..4: 0.1% 0.9% 0.3% B16..8: 41.8% 6.4 % 1.7% direct: 1.7% skip:47.1% L0:36.4% L1:53.3% BI:10.3% [libx264 @ 0000000004360620] 8x8 transform intra:65.7% inter:58.8% [libx264 @ 0000000004360620] coded y,uvDC,uvAC intra: 71.2% 76.6% 35.7% inter: 2 0.7% 13.0% 0.5% [libx264 @ 0000000004360620] i16 v,h,dc,p: 48% 24% 8% 20% [libx264 @ 0000000004360620] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 17% 18% 15% 6% 8% 11% 8% 10% 8% [libx264 @ 0000000004360620] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 16% 15% 7% 10% 11% 8% 8% 7% [libx264 @ 0000000004360620] i8c dc,h,v,p: 51% 22% 19% 9% [libx264 @ 0000000004360620] Weighted P-Frames: Y:0.7% UV:0.0% [libx264 @ 0000000004360620] ref P L0: 63.4% 19.7% 11.0% 5.9% 0.0% [libx264 @ 0000000004360620] ref B L0: 90.7% 8.7% 0.7% [libx264 @ 0000000004360620] ref B L1: 98.4% 1.6% [libx264 @ 0000000004360620] kb/s:1524.54

  Read the article

• Aquatic Prime on 10.6?

  - by Kevin

  Hello, I have 2 applications that I use with Aquatic Prime. One is an application just with the Aquatic Prime framework, and the other is an application that I've been working on that has been incorporated with the Aquatic Prime framework. The first application I mentioned before has its SDK set to 10.5 with the architecture to 32-bit. The second application I made has its SDK that is set to 10.6 (which it has to since I need NSRunningApplication) and its architecture to 32-bit. Now my question is, whenever I debug my first application it works perfectly fine, but with my second it gives me this interrupted error right after Running. What's going wrong? I've tried doing some breakpoints like "objc-exception-throw" but all it says is stopped at breakpoint 1. I need 10.6 in my application, but I also need Aquatic Prime. Can anyone help me solve this problem? Ok here's the one from the stack trace which I have no idea how to read: 0x91cdff11 <+0000> push %ebp 0x91cdff12 <+0001> mov %esp,%ebp 0x91cdff14 <+0003> sub $0x28,%esp 0x91cdff17 <+0006> mov %ebx,-0xc(%ebp) 0x91cdff1a <+0009> mov %esi,-0x8(%ebp) 0x91cdff1d <+0012> mov %edi,-0x4(%ebp) 0x91cdff20 <+0015> call 0x91cdff25 <objc_exception_throw+20> 0x91cdff25 <+0020> pop %ebx 0x91cdff26 <+0021> mov 0x8(%ebp),%esi 0x91cdff29 <+0024> lea 0xe4cbb8b(%ebx),%edi 0x91cdff2f <+0030> mov 0x4(%edi),%eax 0x91cdff32 <+0033> test %eax,%eax 0x91cdff34 <+0035> jne 0x91cdff3b <objc_exception_throw+42> 0x91cdff36 <+0037> call 0x91ce4f53 <set_default_handlers> 0x91cdff3b <+0042> mov %esi,(%esp) 0x91cdff3e <+0045> nop 0x91cdff3f <+0046> nopl 0x0(%eax) 0x91cdff43 <+0050> mov %esi,(%esp) 0x91cdff46 <+0053> call *0x4(%edi) 0x91cdff49 <+0056> lea 0xfd44(%ebx),%eax 0x91cdff4f <+0062> mov %eax,(%esp) 0x91cdff52 <+0065> call 0x91ce4e1f <_objc_fatal> The the GDB tells me its all good: run [Switching to process 990] Running… 2009-10-14 15:20:33.233 ApplicationName[990:a0f] init Sincerely, Kevin

  Read the article

• JSON Feed Appears to be XHR when it should be JS

  - by Oscar Godson

  I don't get why it'd doing this with the 2nd feed (appearing as a XHR call rather than just JS [looking at it in Firefox/Firebug]). The 2nd feed has the exact same MIME type as Flickr's JSON feed, yet the PortlandOregon.gov one shows as XHR and i get a NULL callback when using $.getJSON and if i use $.ajax with a 'json' or 'jsonp' type i get nothing at all. If i do the Flickr one i get the normal "[object Object]" callback. Whats going on? Please help! This has been such a headache for about a week. And i have authorization to change the feed, but i have to request the change, so if anyone knows for absolute sure let me know that! Response Headers from Flickr's API ( http://api.flickr.com/services/feeds/photos_public.gne?tags=cat&tagmode=any&format=json&jsoncallback=? ) [JS]: Date Mon, 15 Mar 2010 21:56:06 GMT P3P policyref="http://p3p.yahoo.com/w3c/p3p.xml", CP="CAO DSP COR CUR ADM DEV TAI PSA PSD IVAi IVDi CONi TELo OTPi OUR DELi SAMi OTRi UNRi PUBi IND PHY ONL UNI PUR FIN COM NAV INT DEM CNT STA POL HEA PRE GOV" Expires Mon, 26 Jul 1997 05:00:00 GMT Last-Modified Mon, 15 Mar 2010 21:52:17 GMT Cache-Control no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma no-cache Vary Accept-Encoding Content-Encoding gzip Content-Length 3647 Connection close Content-Type application/x-javascript; charset=utf-8 Request Headers Host api.flickr.com User-Agent Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6 Accept */* Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer http://oscargodson.com/dev/addWidget/test.html Cookie BX=4lflj455amesp&b=3&s=iv; fltoto=0%2C0%2C0%2C0%2C1%2C0%3B0%2C0%2C0%2C0%2C0%2C0%2C0%2C0%2C0%2C0%2C0%2C0%2C0%3B1%3B0%3B; search_z=t; localization=en-us%3Bus%3Bus PortlandOregon.gov ( http://www.portlandonline.com/shared/cfm/json.cfm?c=27321 ) [XHR]: Response Headers Connection close Date Mon, 15 Mar 2010 21:57:49 GMT Server Microsoft-IIS/6.0 Set-Cookie CONTACT_ID=0;path=/ LAST_USER=;path=/ BIGipServercgis_pol_web_pool-http=1191537418.20480.0000; path=/ Content-Type application/x-javascript; charset=utf-8 Request Headers Host www.portlandonline.com User-Agent Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6 Accept application/json, text/javascript, */* Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer http://oscargodson.com/dev/addWidget/test.html Origin http://oscargodson.com

  Read the article

• Large margin by long title

  - by Kevin Koenen

  I try to show a list of offers. When an advertiser insert a large title, the margin of an item (offer) will be showed what shouldn't. I've tried different layouts but that doesn't work. Link to image :) You see, some of the items has a large margin. Here's the code: <?xml version="1.0" encoding="utf-8"?> <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/gallerylayout" android:layout_width="fill_parent" android:layout_height="fill_parent"> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_height="wrap_content" android:gravity="left|center" android:layout_width="wrap_content" android:paddingBottom="2dp" android:paddingTop="2dp" android:paddingLeft="5dp" android:background="#20000000" android:cacheColorHint="#00000000"> <ImageView android:id="@+id/ad_image_small" android:layout_width="wrap_content" android:layout_height="fill_parent" android:layout_marginRight="6dip" android:src="@drawable/ic_launcher"/> <LinearLayout android:orientation="vertical" android:layout_width="0dip" android:layout_weight="1" android:layout_height="fill_parent"> <TextView android:id="@+id/ad_id" android:visibility="gone" android:layout_width="wrap_content" android:layout_height="wrap_content"/> <TextView android:id="@+id/ad_img_url" android:visibility="gone" android:layout_width="wrap_content" android:layout_height="wrap_content"/> <LinearLayout android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="wrap_content"> <TextView android:id="@+id/ad_title" android:layout_width="wrap_content" android:layout_height="wrap_content" android:padding="3dp" android:gravity="left" android:textColor="#000000" android:ellipsize="end" android:singleLine="true"/> <TextView android:id="@+id/ad_km" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_margin="3dp" android:layout_marginBottom="1dp" android:textColor="#000000" android:gravity="right"/> </LinearLayout> <LinearLayout android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="wrap_content"> <TextView android:id="@+id/ad_text" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginLeft="3dp" android:textColor="#0099CC" android:ellipsize="end" android:singleLine="true"/> </LinearLayout> <LinearLayout android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_margin="2dp" android:padding="5dp"> <ImageView android:id="@+id/ad_clock" android:layout_width="20dp" android:layout_height="20dp" android:layout_marginRight="5dip" android:src="@drawable/icon_clock"/> <ProgressBar android:id="@+id/progressbar" android:layout_width="match_parent" android:layout_height="8dp" android:layout_margin="5dp" android:paddingLeft="2dp" android:max="100" style="?android:attr/progressBarStyleHorizontal" android:progressDrawable="@drawable/color_progressbar" /> </LinearLayout> </LinearLayout> </LinearLayout> <ImageView android:id="@+id/overlay_image" android:background="#0000" android:src="@drawable/verlopen2x" android:layout_alignTop="@id/ad_image_small" android:layout_alignBottom="@id/ad_image_small" android:layout_width="fill_parent" android:layout_height="wrap_content" android:adjustViewBounds="true" android:visibility="visible" /> I can't see what i'm doing wrong. Thanks in advance!

  Read the article

• FASM vc MASM trasnlation problem in mov si, offset msg

  - by Ruben Trancoso

  hi folks, just did my first test with MASM and FASM with the same code (almos) and I falled in trouble. The only difference is that to produce just the 104 bytes I need to write to MBR in FASM I put org 7c00h and in MASM 0h. The problem is on the mov si, offset msg that in the first case transletes it to 44 7C (7c44h) and with masm translates to 44 00 (0044h)! but just when I change org 7c00h to org 0h in MASM. Otherwise it will produce the entire segment from 0 to 7dff. how do I solve it? or in short, how to make MASM produce a binary that begins at 7c00h as it first byte and subsequent jumps remain relative to 7c00h? .model TINY .code org 7c00h ; Boot entry point. Address 07c0:0000 on the computer memory xor ax, ax ; Zero out ax mov ds, ax ; Set data segment to base of RAM jmp start ; Jump to the first byte after DOS boot record data ; ---------------------------------------------------------------------- ; DOS boot record data ; ---------------------------------------------------------------------- brINT13Flag db 90h ; 0002h - 0EH for INT13 AH=42 READ brOEM db 'MSDOS5.0' ; 0003h - OEM name & DOS version (8 chars) brBPS dw 512 ; 000Bh - Bytes/sector brSPC db 1 ; 000Dh - Sectors/cluster brResCount dw 1 ; 000Eh - Reserved (boot) sectors brFATs db 2 ; 0010h - FAT copies brRootEntries dw 0E0h ; 0011h - Root directory entries brSectorCount dw 2880 ; 0013h - Sectors in volume, < 32MB brMedia db 240 ; 0015h - Media descriptor brSPF dw 9 ; 0016h - Sectors per FAT brSPH dw 18 ; 0018h - Sectors per track brHPC dw 2 ; 001Ah - Number of Heads brHidden dd 0 ; 001Ch - Hidden sectors brSectors dd 0 ; 0020h - Total number of sectors db 0 ; 0024h - Physical drive no. db 0 ; 0025h - Reserved (FAT32) db 29h ; 0026h - Extended boot record sig brSerialNum dd 404418EAh ; 0027h - Volume serial number (random) brLabel db 'OSAdventure' ; 002Bh - Volume label (11 chars) brFSID db 'FAT12 ' ; 0036h - File System ID (8 chars) ;------------------------------------------------------------------------ ; Boot code ; ---------------------------------------------------------------------- start: mov si, offset msg call showmsg hang: jmp hang msg db 'Loading...',0 showmsg: lodsb cmp al, 0 jz showmsgd push si mov bx, 0007 mov ah, 0eh int 10h pop si jmp showmsg showmsgd: retn ; ---------------------------------------------------------------------- ; Boot record signature ; ---------------------------------------------------------------------- dw 0AA55h ; Boot record signature END

  Read the article

• Stack Overflow Exploit in C

  - by Fernando Gonzalez

  Hey there guys, the question is actually about stack overflows in C. I have an assigment that I can not get done for the life of me, i've looked at everything in the gdb and I just cant figure it. The question is the following: int i,n; void confused() { printf("who called me"); exit(0); } void shell_call(char *c) { printf(" ***Now calling \"%s\" shell command *** \n",c); system(c); exit(0); } void victim_func() { int a[4]; printf("[8]:%x\n", &a[8]); printf("Enter n: "); scanf("%d",&n); printf("Enter %d HEX Values \n",n); for(i=0;i<n;i++) scanf("%x",&a[i]); printf("Done reading junk numbers\n"); } int main() { printf("ls=736c --- ps = 7370 --- cal = 6c6163\n"); printf("location of confused %x \n", confused); printf("location of shell_call %x \n", shell_call); victim_func(); printf("Done, thank you\n"); } Ok, so I managed to get the first question correctly, which is to arbitrarily call one of the two functions not explicitly called in the main path. By the way, this has to be done while running the program without any modifications. I did this by running the program, setting N to 7, which gets me to the Function Pointer of the victim_func frame, I write a[7] with the memory address of confused or shell_call, and it works. (I have a 64 bit machine, thats why I have to get it to 7, since the EBI pointer is 2 ints wide, instead of 1) My question is the following, how could I control which argument gets passed to the shell_code funcion? ie. how do i write a string to char* c. The whole point is executing unix commands like "ps" etc, by running only the program. I figured writing the EBI pointer with the hex representation of "ps" and setting the arg list of shell_call to that, but that didn't work. I also tried inputing argsv arguments and setting the arg list of shell_call to the arg_list of main, but didnt work either. I think the second version should work, but i believe im not setting the arg list of the new stack frame correctly ( I did it by writing a[8] to 0, since its the first part of the functin pointer, and writing a[9]=736c and a[10]=0000, but its probably not right since those are the parameters of victim_func. So how do i access the parameters of shell_call?

  Read the article

• How can I tell groovy/grails not to try to "re-encode" binary data? (Revised title)

  - by ?????

  I have a groovy/grails application that needs to serve images It works fine on my dev box, the image is returned properly. Here's the start of the returned JPEG, as seen by od -cx 0000000 377 330 377 340 \0 020 J F I F \0 001 001 001 001 , d8ff e0ff 1000 464a 4649 0100 0101 2c01 but on the production box, there's some garbage in front, and the d8ff e0ff before the 1000 is missing 0000000 ? ** ** ? ** ** ? ** ** ? ** ** \0 020 J F bfef efbd bdbf bfef efbd bdbf 1000 464a 0000020 I F \0 001 001 001 \0 H \0 H \0 \0 ? ** ** ? 4649 0100 0101 4800 4800 0000 bfef efbd It's the exact same code. I just moved the .war over and run it on a different machine. (Isn't Java supposed to be write once, run everywhere?) Any ideas? An "encoding" problem? The code is sent to the response like this: response.contentType = "image/jpeg"; response.outputStream << out; Here's the code that locates the image on an internal application server and re-serves the image. I've pared down the code a bit to remove the error handling, etc, to make it easier to read. def show = { def address = "http://internal.application.server:9899/img?photoid=${params.id}" def out = new ByteArrayOutputStream() out << new URL(address).openStream() response.contentLength = out.size(); // XXX If you don't do this hack, "head" requests won't work! if (request.method == 'HEAD') { render( text : "", contentType : "image/jpeg" ); } else { response.contentType = "image/jpeg"; response.outputStream << out; } } Update: I tried setting the CharacterEncoding response.setCharacterEncoding("ISO-8859-1"); if (request.method == 'HEAD') { render( text : "", contentType : "image/jpeg" ); } else { response.contentType = "image/jpeg;charset=ISO-8859-1"; response.outputStream << out; } but it made no difference in the output. On my production machine, the binary bytes in the image are re-encoded/escaped as if they were UTF-8 (see Michael's explanation below). It works fine on my development machine.

  Read the article

• C++: compute a number's complement and its number of possible mismatches

  - by Eagle

  I got a bit stuck with my algorithm and I need some help to solve my problem. I think an example would explain better my problem. Assuming: d = 4 (maximum number of allowed bits in a number, 2^4-1=15). m_max = 1 (maximum number of allowed bits mismatches). kappa = (maximum number of elements to find for a given d and m, where m in m_max) The main idea is for a given number, x, to compute its complement number (in binary base) and all the possible combinations for up to m_max mismatches from x complement's number. Now the program start to scan from i = 0 till 15. for i = 0 and m = 0, kappa = \binom{d}{0} = 1 (this called a perfect match) possible combinations in bits, is only 1111 (for 0: 0000). for i = 0 and m = 1, kappa = \binom{d}{1} = 4 (one mismatch) possible combinations in bits are: 1000, 0100, 0010 and 0001 My problem was to generalize it to general d and m. I wrote the following code: #include <stdlib.h> #include <iomanip> #include <boost/math/special_functions/binomial.hpp> #include <iostream> #include <stdint.h> #include <vector> namespace vec { typedef std::vector<unsigned int> uint_1d_vec_t; } int main( int argc, char* argv[] ) { int counter, d, m; unsigned num_combination, bits_mask, bit_mask, max_num_mismatch; uint_1d_vec_t kappa; d = 4; m = 2; bits_mask = 2^num_bits - 1; for ( unsigned i = 0 ; i < num_elemets ; i++ ) { counter = 0; for ( unsigned m = 0 ; m < max_num_mismatch ; m++ ) { // maximum number of allowed combinations num_combination = boost::math::binomial_coefficient<double>( static_cast<unsigned>( d ), static_cast<unsigned>(m) ); kappa.push_back( num_combination ); for ( unsigned j = 0 ; j < kappa.at(m) ; j++ ) { if ( m == 0 ) v[i][counter++] = i^bits_mask; // M_0 else { bit_mask = 1 << ( num_bits - j ); v[i][counter++] = v[i][0] ^ bits_mask } } } } return 0; } I got stuck in the line v[i][counter++] = v[i][0] ^ bits_mask since I was unable to generalize my algorithm to m_max1, since I needed for m_max mismatches m_max loops and in my original problem, m is unknown until runtime.

  Read the article

• How can I parse a namespace using the SAX parser?

  - by Silvestri

  Hello, Using a twitter search URL ie. http://search.twitter.com/search.rss?q=android returns CSS that has an item that looks like: <item> <title>@UberTwiter still waiting for @ubertwitter android app!!!</title> <link>http://twitter.com/meals69/statuses/21158076391</link> <description>still waiting for an app!!!</description> <pubDate>Sat, 14 Aug 2010 15:33:44 +0000</pubDate> <guid>http://twitter.com/meals69/statuses/21158076391</guid> <author>Some Twitter User</author> <media:content type="image/jpg" height="48" width="48" url="http://a1.twimg.com/profile_images/756343289/me2_normal.jpg"/> <google:image_link>http://a1.twimg.com/profile_images/756343289/me2_normal.jpg</google:image_link> <twitter:metadata> <twitter:result_type>recent</twitter:result_type> </twitter:metadata> </item> Pretty simple. My code parses out everything (title, link, description, pubDate, etc.) without any problems. However, I'm getting null on: <google:image_link> I'm using Java to parse the RSS feed. Do I have to handle compound localnames differently than I would a more simple localname? This is the bit of code that parses out Link, Description, pubDate, etc: @Override public void endElement(String uri, String localName, String name) throws SAXException { super.endElement(uri, localName, name); if (this.currentMessage != null){ if (localName.equalsIgnoreCase(TITLE)){ currentMessage.setTitle(builder.toString()); } else if (localName.equalsIgnoreCase(LINK)){ currentMessage.setLink(builder.toString()); } else if (localName.equalsIgnoreCase(DESCRIPTION)){ currentMessage.setDescription(builder.toString()); } else if (localName.equalsIgnoreCase(PUB_DATE)){ currentMessage.setDate(builder.toString()); } else if (localName.equalsIgnoreCase(GUID)){ currentMessage.setGuid(builder.toString()); } else if (uri.equalsIgnoreCase(AVATAR)){ currentMessage.setAvatar(builder.toString()); } else if (localName.equalsIgnoreCase(ITEM)){ messages.add(currentMessage); } builder.setLength(0); } } startDocument looks like: @Override public void startDocument() throws SAXException { super.startDocument(); messages = new ArrayList<Message>(); builder = new StringBuilder(); } startElement looks like: @Override public void startElement(String uri, String localName, String name, Attributes attributes) throws SAXException { super.startElement(uri, localName, name, attributes); if (localName.equalsIgnoreCase(ITEM)){ this.currentMessage = new Message(); } } Tony

  Read the article

• Bluetooth service problem

  - by hara

  hi I need to create a custom bluetooth service and I have to develop it using c++. I read a lot of examples but I didn't success in publishing a new service with a custom UUID. I need to specify a UUID in order to be able to connect to the service from an android app. This is what i wrote: GUID service_UUID = { /* 00000003-0000-1000-8000-00805F9B34FB */ 0x00000003, 0x0000, 0x1000, {0x80, 0x00, 0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB} }; SOCKET s, s2; SOCKADDR_BTH sab if (WSAStartup(MAKEWORD(2, 2), &wsd) != 0) return 1; printf("installing a new service\n"); s = socket(AF_BTH, SOCK_STREAM, BTHPROTO_RFCOMM); if (s == INVALID_SOCKET) { printf ("Socket creation failed, error %d\n", WSAGetLastError()); return 1; } memset (&sab, 0, sizeof(sab)); sab.addressFamily = AF_BTH; sab.port = BT_PORT_ANY; sab.serviceClassId = service_UUID; if (0 != bind(s, (SOCKADDR *) &sab, sizeof(sab))) { printf ("bind() failed with error code %d\n", WSAGetLastError()); closesocket (s); return 1; } int result=sizeof(sab); getsockname(s,(SOCKADDR *) &sab, &result ); printSOCKADDR_BTH(sab); if(listen (s, 5) == 0) printf("listen() is OK! Listening for connection... :)\n"); else printf("listen() failed with error code %d\n", WSAGetLastError()); printf("waiting connection"); for ( ; ; ) { int ilen = sizeof(sab2); s2 = accept (s, (SOCKADDR *)&sab2, &ilen); printf ("accepted"); } if(closesocket(s) == 0) printf("closesocket() pretty fine!\n"); if(WSACleanup () == 0) printf("WSACleanup() is OK!\n"); return 0; When i print the SOCKADDR_BTH structure retrieved with get getsockname i get an UUID that is not the mine. Furthermore if i use the UUID read from getsockname to connect the Android application the connection fails with this exception: java.io.IOException: Service discovery failed Could you help me?? Thanks!

  Read the article

• A NSMutableArray is destroying my life!

  - by camilo

  EDITED to show the relevant part of the code Hi. There's a strange problem with an NSMutableArray which I'm just not understanding... Explaining: I have a NSMutableArray, defined as a property (nonatomic, retain), synthesized, and initialized with 29 elements. realSectionNames = [[NSMutableArray alloc] initWithCapacity:29]; After the initialization, I can insert elements as I wish and everything seems to be working fine. While I'm running the application, however, if I insert a new element in the array, I can print the array in the function where I inserted the element, and everything seems ok. However, when I select a row in the table, and I need to read that array, my application crashes. In fact, it cannot even print the array anymore. Is there any "magical and logical trick" everybody should know when using a NSMutableArray that a beginner like myself can be missing? Thanks a lot. I declare my array as realSectionNames = [[NSMutableArray alloc] initWithCapacity:29]; I insert objects in my array with [realSectionNames addObject:[category categoryFirstLetter]]; although I know i can also insert it with [realSectionNames insertObject:[category categoryFirstLetter] atIndex:i]; where the "i" is the first non-occupied position. After the insertion, I reload the data of my tableView. Printing the array before or after reloading the data shows it has the desired information. After that, selecting a row at the table makes the application crash. This realSectionNames is used in several UITableViewDelegate functions, but for the case it doesn't matter. What truly matters is that printing the array in the beginning of the didSelectRowAtIndexPath function crashes everything (and of course, doesn't print anything). I'm pretty sure it's in that line, for printing anything he line before works (example): NSLog(@"Anything"); NSLog(@"%@", realSectionNames); gives the output: 2010-03-24 15:16:04.146 myApplicationExperience[3527:207] Anything [Session started at 2010-03-24 15:16:04 +0000.] GNU gdb 6.3.50-20050815 (Apple version gdb-967) (Tue Jul 14 02:11:58 UTC 2009) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-apple-darwin".sharedlibrary apply-load-rules all Attaching to process 3527. Still not understanding what kind of stupidity I've done this time... maybe it's not too late to follow the career of brain surgeon?

  Read the article

• Is it possible to create a service like Feed My Inbox on my own server?

  - by Mark Bowen

  I was just wondering if it's at all possible to create a service like Feed My Inbox on my own server using PHP? Basically I have a site which has RSS feeds which are dynamic in nature and can search from thousands of posts based on many different criteria. I have the RSS feed working fine and bringing back data dynamically for whatever criteria I want so that bits fine. I am using the ExpressionEngine CMS to handle the site and there will be thousands of users on the site (currently there are around 2,0000) but that number is exponentially growing every single day. What I want to be able to do is allow the users to choose from certain criteria which will then build a dynamic RSS URL which will then be stored in a database table (one row for each user). This bit I will be able to do myself but then I want to be able to send out new RSS feed items via e-mail to each user. This is the part I'm a little stuck on. I'm guessing I would somehow need to run a cron job to hit a page which would check each users RSS feed and then if there are new items to send them to the user via e-mail. That's where I am totally stuck though and I'm just wondering what the best way to go about it would be? That or any software in PHP that already does this sort of thing would be great. I tried out phpList but it has severe problems working with RSS and I only ever got it to work once and now never again and I've read that lots of people have had this same problem so unfortunately it's not just me :-( I know there are services such as Feed My Inbox which I could easily set up so that users click a link and their RSS feed URL is added to go and use that service but I want to keep users from seeing the dynamic nature of the feed or they will easily be able to modify it to get at other items in the feed. I need this so that I can charge for access to the feeds but if people can see the URL of the feed then I will be totally unstuck as they will be able to get at whatever they want very easily. Therefore I'd like to be able to send the items out to them. Would really love to hear if anyone knows if this kind of thing is possible at all and what would be involved?

  Read the article

• Fixed strptime exception with thread lock, but slows down the program

  - by eWizardII

  I have the following code, which when is running inside of a thread (the full code is here - https://github.com/eWizardII/homobabel/blob/master/lovebird.py) for null in range(0,1): while True: try: with open('C:/Twitter/tweets/user_0_' + str(self.id) + '.json', mode='w') as f: f.write('[') threadLock.acquire() for i, seed in enumerate(Cursor(api.user_timeline,screen_name=self.ip).items(200)): if i>0: f.write(", ") f.write("%s" % (json.dumps(dict(sc=seed.author.statuses_count)))) j = j + 1 threadLock.release() f.write("]") except tweepy.TweepError, e: with open('C:/Twitter/tweets/user_0_' + str(self.id) + '.json', mode='a') as f: f.write("]") print "ERROR on " + str(self.ip) + " Reason: ", e with open('C:/Twitter/errors_0.txt', mode='a') as a_file: new_ii = "ERROR on " + str(self.ip) + " Reason: " + str(e) + "\n" a_file.write(new_ii) break Now without the thread lock I generate the following error: Exception in thread Thread-117: Traceback (most recent call last): File "C:\Python27\lib\threading.py", line 530, in __bootstrap_inner self.run() File "C:/Twitter/homobabel/lovebird.py", line 62, in run for i, seed in enumerate(Cursor(api.user_timeline,screen_name=self.ip).items(200)): File "build\bdist.win-amd64\egg\tweepy\cursor.py", line 110, in next self.current_page = self.page_iterator.next() File "build\bdist.win-amd64\egg\tweepy\cursor.py", line 85, in next items = self.method(page=self.current_page, *self.args, **self.kargs) File "build\bdist.win-amd64\egg\tweepy\binder.py", line 196, in _call return method.execute() File "build\bdist.win-amd64\egg\tweepy\binder.py", line 182, in execute result = self.api.parser.parse(self, resp.read()) File "build\bdist.win-amd64\egg\tweepy\parsers.py", line 75, in parse result = model.parse_list(method.api, json) File "build\bdist.win-amd64\egg\tweepy\models.py", line 38, in parse_list results.append(cls.parse(api, obj)) File "build\bdist.win-amd64\egg\tweepy\models.py", line 49, in parse user = User.parse(api, v) File "build\bdist.win-amd64\egg\tweepy\models.py", line 86, in parse setattr(user, k, parse_datetime(v)) File "build\bdist.win-amd64\egg\tweepy\utils.py", line 17, in parse_datetime date = datetime(*(time.strptime(string, '%a %b %d %H:%M:%S +0000 %Y')[0:6])) File "C:\Python27\lib\_strptime.py", line 454, in _strptime_time return _strptime(data_string, format)[0] File "C:\Python27\lib\_strptime.py", line 300, in _strptime _TimeRE_cache = TimeRE() File "C:\Python27\lib\_strptime.py", line 188, in __init__ self.locale_time = LocaleTime() File "C:\Python27\lib\_strptime.py", line 77, in __init__ raise ValueError("locale changed during initialization") ValueError: locale changed during initialization The problem is with thread lock on, each thread runs itself serially basically, and it takes way to long for each loop to run for there to be any advantage to having a thread anymore. So if there isn't a way to get rid of the thread lock, is there a way to have it run the for loop inside of the try statement faster?

  Read the article

• log4bash: Cannot find a way to add MaxBackupIndex to this logger implementation

  - by Syffys

  I have been trying to modify this log4bash implementation but I cannot manage to make it work. Here's a sample: #!/bin/bash TRUE=1 FALSE=0 ############### Added for testing log4bash_LOG_ENABLED=$TRUE log4bash_rootLogger=$TRACE,f,s log4bash_appender_f=file log4bash_appender_f_dir=$(pwd) log4bash_appender_f_file=test.log log4bash_appender_f_roll_format=%Y%m log4bash_appender_f_roll=$TRUE log4bash_appender_f_maxBackupIndex=10 #################################### log4bash_abs(){ if [ "${1:0:1}" == "." ]; then builtin echo ${rootDir}/${1} else builtin echo ${1} fi } log4bash_check_app_dir(){ if [ "$log4bash_LOG_ENABLED" -eq $TRUE ]; then dir=$(log4bash_abs $1) if [ ! -d ${dir} ]; then #log a seperation line mkdir $dir fi fi } # Delete old log files # $1 Log directory # $2 Log filename # $3 Log filename suffix # $4 Max backup index log4bash_delete_old_files(){ ##### Added for testing builtin echo "Running log4bash_delete_old_files $@" &2 ##### if [ "$log4bash_LOG_ENABLED" -eq $TRUE ] && [ -n "$3" ] && [ "$4" -gt 0 ]; then local directory=$(log4bash_abs $1) local filename=$2 local maxBackupIndex=$4 local suffix=$(echo "${3}" | sed -re 's/[^.]/?/g') local logFileList=$(find "${directory}" -mindepth 1 -maxdepth 1 -name "${filename}${suffix}" -type f | xargs ls -1rt) local fileCnt=$(builtin echo -e "${logFileList}" | wc -l) local fileToDeleteCnt=$(($fileCnt-$maxBackupIndex)) local fileToDelete=($(builtin echo -e "${logFileList}" | head -n "${fileToDeleteCnt}" | sed ':a;N;$!ba;s/\n/ /g')) ##### Added for testing builtin echo "log4bash_delete_old_files About to start deletion ${fileToDelete[@]}" &2 ##### if [ ${fileToDeleteCnt} -gt 0 ]; then for f in "${fileToDelete[@]}"; do #### Added for testing builtin echo "Removing file ${f}" &2 #### builtin eval rm -f ${f} done fi fi } #Appender # $1 Log directory # $2 Log file # $3 Log file roll ? # $4 Appender Name log4bash_filename(){ builtin echo "Running log4bash_filename $@" &2 local format local filename log4bash_check_app_dir "${1}" if [ ${3} -eq 1 ];then local formatProp=${4}_roll_format format=${!formatProp} if [ -z ${format} ]; then format=$log4bash_appender_file_format fi local suffix=.`date "+${format}"` filename=${1}/${2}${suffix} # Old log files deletion local previousFilenameVar=int_${4}_file_previous local maxBackupIndexVar=${4}_maxBackupIndex if [ -n "${!maxBackupIndexVar}" ] && [ "${!previousFilenameVar}" != "${filename}" ]; then builtin eval export $previousFilenameVar=$filename log4bash_delete_old_files "${1}" "${2}" "${suffix}" "${!maxBackupIndexVar}" else builtin echo "log4bash_filename $previousFilenameVar = ${!previousFilenameVar}" fi else filename=${1}/${2} fi builtin echo $filename } ######################## Added for testing filename_caller(){ builtin echo "filename_caller Call $1" output=$(log4bash_abs $(log4bash_filename "${log4bash_appender_f_dir}" "${log4bash_appender_f_file}" "1" "log4bash_appender_f" )) builtin echo ${output} } #### Previous logs generation for i in {1101..1120}; do file="${log4bash_appender_f_file}.2012${i:2:3}" builtin echo "${file} $i" touch -m -t "2012${i}0000" ${log4bash_appender_f_dir}/$file done for i in {1..4}; do filename_caller $i done I expect log4bash_filename function to step into the following if only when the calculated log filename is different from the previous one: if [ -n "${!maxBackupIndexVar}" ] && [ "${!previousFilenameVar}" != "${filename}" ]; then For this scenario to apply, I'd need ${!previousFilenameVar} to be correctly set, but it's not the case, so log4bash_filename steps into this if all the time which is really not necessary... It looks like the issue is due to the following line not working properly: builtin eval export $previousFilenameVar=$filename I have a some theories to explain why: in the original code, functions are declared and exported as readonly which makes them unable to modify global variable. I removed readonly declarations in the above sample, but probleme persists. Function calls are performed in $() which should make them run into seperated shell instances so variable modified are not exported to the main shell But I cannot manage to find a workaround to this issue... Any help is appreciated, thanks in advance!

  Read the article

• Having trouble wrapping functions in the linux kernel

  - by Corey Henderson

  I've written a LKM that implements Trusted Path Execution (TPE) into your kernel: https://github.com/cormander/tpe-lkm I run into an occasional kernel OOPS (describe at the end of this question) when I define WRAP_SYSCALLS to 1, and am at my wit's end trying to track it down. A little background: Since the LSM framework doesn't export its symbols, I had to get creative with how I insert the TPE checking into the running kernel. I wrote a find_symbol_address() function that gives me the address of any function I need, and it works very well. I can call functions like this: int (*my_printk)(const char *fmt, ...); my_printk = find_symbol_address("printk"); (*my_printk)("Hello, world!\n"); And it works fine. I use this method to locate the security_file_mmap, security_file_mprotect, and security_bprm_check functions. I then overwrite those functions with an asm jump to my function to do the TPE check. The problem is, the currently loaded LSM will no longer execute the code for it's hook to that function, because it's been totally hijacked. Here is an example of what I do: int tpe_security_bprm_check(struct linux_binprm *bprm) { int ret = 0; if (bprm->file) { ret = tpe_allow_file(bprm->file); if (IS_ERR(ret)) goto out; } #if WRAP_SYSCALLS stop_my_code(&cs_security_bprm_check); ret = cs_security_bprm_check.ptr(bprm); start_my_code(&cs_security_bprm_check); #endif out: return ret; } Notice the section between the #if WRAP_SYSCALLS section (it's defined as 0 by default). If set to 1, the LSM's hook is called because I write the original code back over the asm jump and call that function, but I run into an occasional kernel OOPS with an "invalid opcode": invalid opcode: 0000 [#1] SMP RIP: 0010:[<ffffffff8117b006>] [<ffffffff8117b006>] security_bprm_check+0x6/0x310 I don't know what the issue is. I've tried several different types of locking methods (see the inside of start/stop_my_code for details) to no avail. To trigger the kernel OOPS, write a simple bash while loop that endlessly starts a backgrounded "ls" command. After a minute or so, it'll happen. I'm testing this on a RHEL6 kernel, also works on Ubuntu 10.04 LTS (2.6.32 x86_64). While this method has been the most successful so far, I have tried another method of simply copying the kernel function to a pointer I created with kmalloc but when I try to execute it, I get: kernel tried to execute NX-protected page - exploit attempt? (uid: 0). If anyone can tell me how to kmalloc space and have it marked as executable, that would also help me solve the above problem. Any help is appreciated!

  Read the article

• MySQL: count enumerated values?

  - by John Isaacks

  If my table looks like this: daily_individual_tracking', 'CREATE TABLE `daily_individual_tracking` ( `daily_individual_tracking_id` int(10) unsigned NOT NULL auto_increment, `daily_individual_tracking_date` date NOT NULL default ''0000-00-00'', `sales` enum(''no'',''yes'') NOT NULL COMMENT ''no'', `repairs` enum(''no'',''yes'') NOT NULL COMMENT ''no'', `shipping` enum(''no'',''yes'') NOT NULL COMMENT ''no'', PRIMARY KEY (`daily_individual_tracking_id`) ) ENGINE=InnoDB AUTO_INCREMENT=4 DEFAULT CHARSET=latin1 basically the fields can be either yes or no. How can I count how many yes's their are for each column over a date range? Thanks!!

  Read the article

• JAVA: XML parsers gives null element

  - by Johan

  When I try to parse a XML-file, it gives sometimes a null element by the title. I think it has to do with HTML-tags &#039; How can I solve this problem? I have the follow XML-file: <item> <title>&#039; Nieuwe DVD &#039;</title> <description>tekst, tekst tekst</description> <link>dvd.html</link> <category>nieuws</category> <pubDate>Sat, 1 Jan 2011 9:24:00 +0000</pubDate> </item> And the follow code to parse the xml-file: //DocumentBuilderFactory, DocumentBuilder are used for //xml parsing DocumentBuilderFactory dbf = DocumentBuilderFactory .newInstance(); DocumentBuilder db = dbf.newDocumentBuilder(); //using db (Document Builder) parse xml data and assign //it to Element Document document = db.parse(is); Element element = document.getDocumentElement(); //take rss nodes to NodeList element.normalize(); NodeList nodeList = element.getElementsByTagName("item"); if (nodeList.getLength() > 0) { for (int i = 0; i < nodeList.getLength(); i++) { //take each entry (corresponds to <item></item> tags in //xml data Element entry = (Element) nodeList.item(i); entry.normalize(); Element _titleE = (Element) entry.getElementsByTagName( "title").item(0); Element _categoryE = (Element) entry .getElementsByTagName("category").item(0); Element _pubDateE = (Element) entry .getElementsByTagName("pubDate").item(0); Element _linkE = (Element) entry.getElementsByTagName( "link").item(0); String _title = _titleE.getFirstChild().getNodeValue(); String _category = _categoryE.getFirstChild().getNodeValue(); Date _pubDate = new Date(_pubDateE.getFirstChild().getNodeValue()); String _link = _linkE.getFirstChild().getNodeValue(); //create RssItemObject and add it to the ArrayList RssItem rssItem = new RssItem(_title, _category, _pubDate, _link); rssItems.add(rssItem); conn.disconnect(); }

  Read the article

• iproute2 not functioning ("RTNETLINK answers: Operation not supported")

  - by James Watt

  The command and error message: gtwy ~ # ip rule add from 64.251.23.186 table t1 RTNETLINK answers: Operation not supported Older article of the same problem, but it did not help me: http://forums.gentoo.org/viewtopic-t-696982-start-0-postdays-0-postorder-asc-highlight-.html I have looked on google at great lengths to try to find a solution. It seems that my kernel configuration is missing something? Any help or ideas would be appreciated. My system/kernel is: 2.6.36-gentoo-r5 #3 SMP Thu Jan 13 10:49:06 EST 2011 x86_64 Intel(R) Xeon(R) CPU X3220 @ 2.40GHz GenuineIntel GNU/Linux. I am posting this on SuperUser since this system is used as a workstation and this problem is unrelated to specific tasks that are handled exclusively by servers. iproute2 is installed: gtwy etc # emerge --search iproute2 Searching... [ Results for search key : iproute2 ] [ Applications found : 1 ] * sys-apps/iproute2 Latest version available: 2.6.35-r2 Latest version installed: 2.6.35-r2 Size of files: 378 kB Homepage: http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2 Description: kernel routing and traffic control utilities License: GPL-2 A small snippet of my kernel .config (view entire .config): gtwy linux # cat .config | grep NETLINK CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=y CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CT_NETLINK=y CONFIG_SCSI_NETLINK=y gtwy linux # cat .config | grep IP_ADVANCED_ROUTER CONFIG_IP_ADVANCED_ROUTER=y gtwy linux # cat .config | grep INGRESS CONFIG_NET_SCH_INGRESS=y gtwy linux # cat .config | grep NET_SCHED CONFIG_NET_SCHED=y emerge --info Portage 2.1.9.25 (default/linux/amd64/10.0, gcc-4.1.2, glibc-2.10.1-r1, 2.6.36-gentoo-r5 x86_64) ================================================================= System uname: Linux-2.6.36-gentoo-r5-x86_64-Intel-R-_Xeon-R-_CPU_X3220_@_2.40GHz-with-gentoo-1.12.13 Timestamp of tree: Thu, 13 Jan 2011 01:15:01 +0000 app-shells/bash: 4.0_p37 dev-java/java-config: 1.3.7-r1, 2.1.10 dev-lang/python: 2.4.6, 2.5.4-r4, 2.6.5-r2, 3.1.2-r3 sys-apps/baselayout: 1.12.13 sys-apps/sandbox: 1.6-r2 sys-devel/autoconf: 2.13, 2.65 sys-devel/automake: 1.9.6-r2::<unknown repository>, 1.10.2, 1.11.1 sys-devel/binutils: 2.20.1-r1 sys-devel/gcc: 4.1.2, 4.3.4, 4.4.3-r2 sys-devel/gcc-config: 1.4.1 sys-devel/libtool: 2.2.6b sys-devel/make: 3.81 virtual/os-headers: 2.6.30-r1 (sys-kernel/linux-headers) ACCEPT_KEYWORDS="amd64" ACCEPT_LICENSE="*" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=nocona -O2 -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /var/bind" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXXFLAGS="-march=nocona -O2 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="assume-digests binpkg-logs distlocks fixlafiles fixpackages news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch" GENTOO_MIRRORS="http://gentoo.chem.wisc.edu/gentoo" LC_ALL="en_US.UTF-8" LDFLAGS="-Wl,-O1 -Wl,--as-needed" LINGUAS="en" MAKEOPTS="-j5" PKGDIR="/usr/portage/packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage" USE="acl amd64 apache2 berkdb bzip2 cli cracklib crypt ctype cups curl cxx dri fortran gdbm gpm iconv jpeg jpeg2k libwww mmx modules mudflap multilib mysql ncurses nls nptl nptlonly openmp pam pcre perl php png pppd python readline session sockets sse sse2 ssl symlink sysfs tcpd threads unicode vhosts xml xorg xsl zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en" PHP_TARGETS="php5-3" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="fbdev glint intel mach64 mga neomagic nouveau nv r128 radeon savage sis tdfx trident vesa via vmware dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

  Read the article

• Delaying NIS & NFS startup till after network interface is fully ready on Fedora 17

  - by obmarg

  I've recently set up a fedora 17 server for our network, and I've been having trouble getting the NIS service to work on startup. Here's some logs from the system: Aug 21 12:57:12 cairnwell ypbind-pre-setdomain[718]: Setting NIS domain: 'indigo-nis' (environment variable) Aug 21 12:57:13 cairnwell ypbind: Binding NIS service Aug 21 12:57:13 cairnwell rpc.statd[730]: Unable to prune capability 0 from bounding set: Operation not permitted Aug 21 12:57:13 cairnwell systemd[1]: nfs-lock.service: control process exited, code=exited status=1 Aug 21 12:57:13 cairnwell systemd[1]: Unit nfs-lock.service entered failed state. Aug 21 12:57:14 cairnwell setroubleshoot: SELinux is preventing /usr/sbin/rpc.statd from using the setpcap capability. For complete SELinux messages. run sealert -l 024bba8a-b0ef-43dc-b195-5c9a2d4c4d41 Aug 21 12:57:15 cairnwell kernel: [ 18.822282] bnx2 0000:02:00.0: em1: NIC Copper Link is Up, 1000 Mbps full duplex Aug 21 12:57:15 cairnwell kernel: [ 18.822925] ADDRCONF(NETDEV_CHANGE): em1: link becomes ready Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> (em1): carrier now ON (device state 20) Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> (em1): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> Auto-activating connection 'System em1'. Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> Activation (em1) starting connection 'System em1' Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> (em1): device state change: disconnected -> prepare (reason 'none') [30 40 0] ....... Aug 21 12:57:19 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:57:26 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:57:31 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:57:35 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:58:00 cairnwell ypbind: Binding took 47 seconds Aug 21 12:58:00 cairnwell ypbind: NIS server for domain indigo-nis is not responding. Aug 21 12:58:01 cairnwell ypbind: Killing ypbind with PID 733. Aug 21 12:58:01 cairnwell ypbind-post-waitbind[734]: /usr/lib/ypbind/ypbind-post-waitbind: line 51: kill: SIGTERM: invalid signal specification Aug 21 12:58:01 cairnwell systemd[1]: ypbind.service: control process exited, code=exited status=1 Aug 21 12:58:01 cairnwell systemd[1]: Unit ypbind.service entered failed state. By the looks of these logs the ypbind service is starting up at 12:57:12 but the network interface isn't coming up till 12:57:15. My guess is that this is causing ypbind to time out when trying to connect. As a knock-on effect the NIS failure is causing problems with NFS which is no longer able to map UIDs properly. This problem doesn't seem to be fixed by actually starting ypbind etc. so I've had to set all my NFS shares to noauto. I have tried manually adding NETWORKDELAY and NETWORKWAIT in /etc/sysconfig/network and also running systemctl enable NetworkManager-wait-online.service as I've seen suggested in some places, but neither of these have had any effect. It is relatively easy to fix manually by restarting ypbind & mounting NFS shares after the network has started up, but it's less than ideal to have to do this every time the server has been rebooted. Does anyone know of an easy (and preferably hack-free) way of delaying the ypbind startup till after the network interface is fully ready?

  Read the article

• Apache logs 200 instead of 404

  - by elle

  I've been getting the following in my apache access log: "GET /work//?module=www&section=working=../../../../../../../../../../../../../../../../../../../../../../../..//proc/self/environ%0000 HTTP/1.1" 200 5187 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; pl-PL; rv:1.8.1.24pre) Gecko/20100228 K-Meleon/1.5.4\",\"Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/540.0 (KHTML,like Gecko) Chrome/9.1.0.0 Safari/540.0\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Comodo_Dragon/4.1.1.11 Chrome/4.1.249.1042 Safari/532.5\",\"Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.0.16) Gecko/2009122206 Firefox/3.0.16 Flock/2.5.6\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.1 (KHTML, like Gecko) Maxthon/3.0.8.2 Safari/533.1\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.8.1.8pre) Gecko/20070928 Firefox/2.0.0.7 Navigator/9.0RC1\",\"Opera/9.99 (Windows NT 5.1; U; pl) Presto/9.9.9\",\"Mozilla/5.0 (Windows; U; Windows NT 6.1; zh-HK) AppleWebKit/533.18.1 (KHTML, like Gecko) Version/5.0.2 Safari/533.18.5\",\"Seamonkey-1.1.13-1(X11; U; GNU Fedora fc 10) Gecko/20081112\",\"Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Win64; x64; Trident/5.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Zune 4.0; Tablet PC 2.0; InfoPath.3; .NET4.0C; .NET4.0E)\",\"Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; .NET4.0C; .NET4.0E; InfoPath.3)" If I try the URL, I get a 404 instead of 200 which the above request received. Is there a way I can confirm that the 200 was real and not spoofed? Where is the long info on the client coming from?

  Read the article

• iptable CLUSTERIP won't work

  - by Rad Akefirad

  We have some requirements which explained here. We tried to satisfy them without any success as described. Here is the brief information: Here are requirements: 1. High Availability 2. Load Balancing Current Configuration: Server #1: one static (real) IP for each 10.17.243.11 Server #2: one static (real) IP for each 10.17.243.12 Cluster (virtual and shared among all servers) IP: 10.17.243.15 I tried to use CLUSTERIP to have the cluster IP by the following: on the server #1 iptables -I INPUT -i eth0 -d 10.17.243.15 -j CLUSTERIP --new --hashmode sourceip --clustermac 01:00:5E:00:00:20 --total-nodes 2 --local-node 1 on the server #2 iptables -I INPUT -i eth0 -d 10.17.243.15 -j CLUSTERIP --new --hashmode sourceip --clustermac 01:00:5E:00:00:20 --total-nodes 2 --local-node 2 When we try to ping 10.17.243.15 there is no reply. And the web service (tomcat on port 8080) is not accessible either. However we managed to get the packets on both servers by using TCPDUMP. Some useful information: iptable roules (iptables -L -n -v): Chain INPUT (policy ACCEPT 21775 packets, 1470K bytes) pkts bytes target prot opt in out source destination 0 0 CLUSTERIP all -- eth0 * 0.0.0.0/0 10.17.243.15 CLUSTERIP hashmode=sourceip clustermac=01:00:5E:00:00:20 total_nodes=2 local_node=1 hash_init=0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 14078 packets, 44M bytes) pkts bytes target prot opt in out source destination Log messages: ... kernel: [ 7.329017] e1000e: eth3 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None ... kernel: [ 7.329133] e1000e 0000:05:00.0: eth3: 10/100 speed: disabling TSO ... kernel: [ 7.329567] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready ... kernel: [ 71.333285] ip_tables: (C) 2000-2006 Netfilter Core Team ... kernel: [ 71.341804] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ... kernel: [ 71.343168] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully ... kernel: [ 108.456043] device eth0 entered promiscuous mode ... kernel: [ 112.678859] device eth0 left promiscuous mode ... kernel: [ 117.916050] device eth0 entered promiscuous mode ... kernel: [ 140.168848] device eth0 left promiscuous mode TCPDUMP while pinging: tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 12:11:55.335528 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2390, length 64 12:11:56.335778 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2391, length 64 12:11:57.336010 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2392, length 64 12:11:58.336287 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2393, length 64 And there is no ping reply as I said. Does anyone know which part I missed? Thanks in advance.

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44  | Next Page >