Search Results

Search found 4551 results on 183 pages for 'components'.

Page 41/183 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • Error message during installation of Windows XP Professional

    - by user270686
    During installation of Windows XP Professional the installer had an error which points to a bad CD, so I got another one and tried it, but the same thing happened. What can I do? It says: One of the components Windows needs to continue could not be installed.. The component is called: sys.dll D:/i386/asms/1000/msft/windows/gdiplus/gdiplus.man. I tried running chkdsk /f to fix the errors on the disk. I've searched the internet all day, and I don't know what else to do. I get this error message: SYS.DLL Syntax error in manifest or policy file D:/i386/asms/1000/msft/windows/gdiplus/gdiplus.man on line 4 Error Installation failed d:/I386/asms Error message Data Error (cyclic redundancy check) Fatal error One of the components Windows needs to continue could not be installed. If you are using a CD there might be a problem with the CD try cleaning it and trying again or using another CD.

    Read the article

  • HP-UX: libstd_v2 in stack trace of JNI code compiled with g++

    - by Miguel Rentes
    Hello, uname -mr: B.11.23 ia64 g++ --version: g++ (GCC) 4.4.0 java -version: Java(TM) SE Runtime Environment (build 1.6.0.06-jinteg_20_jan_2010_05_50-b00) Java HotSpot(TM) Server VM (build 14.3-b01-jre1.6.0.06-rc1, mixed mode) I'm trying to run a Java application that uses JNI. It is crashing inside the JNI code with the following (abbreviated) stack trace: (0) 0xc0000000249353e0 VMError::report_and_die{_ZN7VMError14report_and_dieEv} + 0x440 at /CLO/Components/JAVA_HOTSPOT/Src/src/share/vm/utilities/vmError.cpp:738 [/opt/java6/jre/lib/IA64W/server/libjvm.so] (1) 0xc000000024559240 os::Hpux::JVM_handle_hpux_signal{_ZN2os4Hpux22JVM_handle_hpux_signalEiP9 __siginfoPvi} + 0x760 at /CLO/Components/JAVA_HOTSPOT/Src/src/os_cpu/hp-ux_ia64/vm/os_hp-ux_ia64.cpp:1051 [/opt/java6/jre/lib/IA64W/server/libjvm.so] (2) 0xc0000000245331c0 os::Hpux::signalHandler{_ZN2os4Hpux13signalHandlerEiP9__siginfoPv} + 0x80 at /CLO/Components/JAVA_HOTSPOT/Src/src/os/hp-ux/vm/os_hp-ux.cpp:4295 [/opt/java6/jre/lib/IA64W/server/libjvm.so] (3) 0xe00000010e002620 ---- Signal 11 (SIGSEGV) delivered ---- (4) 0xc0000000000d2d20 __pthread_mutex_lock + 0x400 at /ux/core/libs/threadslibs/src/common/pthreads/mutex.c:3895 [/usr/lib/hpux64/libpthread.so.1] (5) 0xc000000000342e90 __thread_mutex_lock + 0xb0 at ../../../../../core/libs/libc/shared_em_64/../core/threads/wrappers1.c:273 [/usr/lib/hpux64/libc.so.1] (6) 0xc00000000177dff0 _HPMutexWrapper::lock{_ZN15_HPMutexWrapper4lockEPv} + 0x90 [/usr/lib/hpux64/libstd_v2.so.1] (7) 0xc0000000017e9960 std::basic_string,std::allocator{_ZNSsC1ERKSs} + 0x80 [/usr/lib/hpux64/libstd_v2.so.1] (8) 0xc000000008fd9fe0 JniString::str{_ZNK9JniString3strEv} + 0x50 at eg_handler_jni.cxx:50 [/soft/bus-7_0/lib/libbus_registry_jni.so.7.0.0] (9) 0xc000000008fd7060 pt_efacec_se_aut_frk_cmp_registry_REGHandler::getKey{_ZN44pt_efacec_se_aut_frk_cmp_registry_REGHandler6getKeyEP8_jstringi} + 0xa0 [/soft/bus-7_0/lib/libbus_registry_jni.so.7.0.0] (10) 0xc000000008fd17f0 Java_pt_efacec_se_aut_frk_cmp_registry_REGHandler_getKey__Ljava_lang_String_2I + 0xa0 [/soft/bus-7_0/lib/libbus_registry_jni.so.7.0.0] (11) 0x9fffffffdf400ed0 Internal error (-3) while unwinding stack [/CLO/Components/JAVA_HOTSPOT/Src/src/os_cpu/hp-ux_ia64/vm/thread_hp-ux_ia64.cpp:142] This JNI code and dependencies are being compiled using g++, are multithreaded and 64 bit (-pthread -mlp64 -shared -fPIC). The LD_LIBRARY_PATH environment variable is set the dependencies location, and running ldd on the JNI shared libraries finds them all: ldd libbus_registry_jni.so: libefa-d.so.7 = /soft/bus-7_0/lib/libefa-d.so.7 libbus_registry-d.so.7 = /soft/bus-7_0/lib/libbus_registry-d.so.7 libboost_thread-gcc44-mt-d-1_41.so = /usr/local/lib/libboost_thread-gcc44-mt-d-1_41.so libboost_system-gcc44-mt-d-1_41.so = /usr/local/lib/libboost_system-gcc44-mt-d-1_41.so libboost_regex-gcc44-mt-d-1_41.so = /usr/local/lib/libboost_regex-gcc44-mt-d-1_41.so librt.so.1 = /usr/lib/hpux64/librt.so.1 libstdc++.so.6 = /opt/hp-gcc-4.4.0/lib/gcc/ia64-hp-hpux11.23/4.4.0/../../../hpux64/libstdc++.so.6 libm.so.1 = /usr/lib/hpux64/libm.so.1 libgcc_s.so.0 = /opt/hp-gcc-4.4.0/lib/gcc/ia64-hp-hpux11.23/4.4.0/../../../hpux64/libgcc_s.so.0 libunwind.so.1 = /usr/lib/hpux64/libunwind.so.1 librt.so.1 = /usr/lib/hpux64/librt.so.1 libm.so.1 = /usr/lib/hpux64/libm.so.1 libunwind.so.1 = /usr/lib/hpux64/libunwind.so.1 libdl.so.1 = /usr/lib/hpux64/libdl.so.1 libunwind.so.1 = /usr/lib/hpux64/libunwind.so.1 libc.so.1 = /usr/lib/hpux64/libc.so.1 libuca.so.1 = /usr/lib/hpux64/libuca.so.1 Looking at the stack trace, it seams odd that, although ldd list g++'s libstdc++ is being used, the std:string copy c'tor being reported as used is the one in libstd_v2, the implementation provided by aCC. The crash happens in the following code, when method str() returns: class JniString { std::string m_utf8; public: JniString(JNIEnv* env, jstring instance) { const char* utf8Chars = env-GetStringUTFChars(instance, 0); if (utf8Chars == 0) { env-ExceptionClear(); // RPF throw std::runtime_error("GetStringUTFChars returned 0"); } m_utf8.assign(utf8Chars); env-ReleaseStringUTFChars(instance, utf8Chars); } std::string str() const { return m_utf8; } }; Simultaneous usage of the two C++ implementations could likely be a reason for the crash, but that should not be happening. Any ideas?

    Read the article

  • Setting up multiple wireless access points on same network

    - by SqlRyan
    I'd like to add wireless to my network, and I need multiple access points to cover the whole area. I'd like to set them up so that there's only one "wireless network" that the clients see, and it switches them as seamlessly as possible between access points as they wander around (if that's not possible, then at least have it so that they don't need to set up the security by hand on each one the first time, if possible). I've searched online, and there are quite a few sets of mixed instructions (same vs different SSID, frequency, does the security need to match exactly, etc.). Can somebody who has some experience doing this please let me know what they did? I imagine it's pretty simple, but there seems to be no clear cut "yes, you can do this" online, even though I know you can. I have a mid-size LAN with about 20 workstations and two Domain Controllers on it. Also, I'll be doing this with consumer wireless components, if it makes a difference, not enterprise-level components (ie. Linksys rather than Cisco).

    Read the article

  • Controlling an amplifier power supply from Squeezebox/SqueezeCenter

    - by teabot
    I have a Squeezebox that is connected to an amplifier. I'd like the amplifier to switch on/off whenever the Squeezebox is powered on/off. I don't mind writing some plugin code to SqueezeCenter to do this but in hardware terms I am looking for off-the-shelf components. I imagine that I need some kind of Ethernet controlled power outlet. I have looked at X10 (I can't bring myself to link to their terrible site), but their product range seems extremely confused and it looks as though I'd have to use both RF and comms-over-mains to implement a computer controlled socket. Does anyone have any alternative suggestions? Note: Any components should be available and certified for use in the UK.

    Read the article

  • How to set parameters of CGContextAddArcToPoint method using a slider

    - by Manish Sahni
    am making an app in which i have to control a smile of a face like graphics. For example if i slide the slider down(to a value less than middle) it should give the arc a sad face(like :-( ) effect and if i slide the slider up the arc should give the effect of smile(like :-) ).initially lips are like :-| . I need to control the lips which is an arc using a slider? smileSliderViewController.h #import <UIKit/UIKit.h> @interface smileSliderViewController : UIViewController { IBOutlet UISlider *slider; } -(IBAction)valueChange:(id)sender; @end smileSliderViewController.m #import "smileSliderViewController.h" //#import "smile.h" @implementation smileSliderViewController -(IBAction)valueChange:(id)sender { int value = (int)(slider.value); if(value>0 && value<25) { //value--; CGContextRef context = UIGraphicsGetCurrentContext(); CGContextSetLineWidth(context, 2.0); CGColorSpaceRef colorspace = CGColorSpaceCreateDeviceRGB(); CGFloat components[] = {0.0,0.0,1.0,1.0}; CGColorRef color = CGColorCreate(colorspace, components); CGContextSetStrokeColorWithColor(context, color); CGContextMoveToPoint(context, 120,180); CGContextAddArcToPoint(context, 190 , 170, 270, 200, 0 ); CGContextStrokePath(context); } } smile.h #import <UIKit/UIKit.h> #import "smile.m" @interface smile : UIView { IBOutlet UISlider *slider; } @end smile.m #import "smile.h" #import "smileSliderViewController.h" @implementation smile - (id)initWithFrame:(CGRect)frame { if (self = [super initWithFrame:frame]) { // Initialization code } return self; } - (void)drawRect:(CGRect)rect { CGContextRef context = UIGraphicsGetCurrentContext(); CGContextSetLineWidth(context, 2.0); //CGContextSetStrokeColor(context, [UIColor redColor].CGColor); CGColorSpaceRef colorspace = CGColorSpaceCreateDeviceRGB(); CGFloat components[] = {0.0,0.0,1.0,1.0}; CGColorRef color = CGColorCreate(colorspace, components); CGContextSetStrokeColorWithColor(context, color); CGRect rectangle = CGRectMake(60, 20, 200,200); CGContextAddEllipseInRect(context, rectangle); CGContextStrokePath(context); /*CGRect rectangle1 = CGRectMake(130,170,50,10); CGContextAddRect(context,rectangle1); CGContextStrokePath(context);*/ /*CGContextMoveToPoint(context,100,200); CGContextAddArcToPoint(context,120,150,400,150,70 ); CGContextStrokePath(context);*/ /*CGContextMoveToPoint(context, 100,100); CGContextAddArcToPoint(context, -100,200, -400,200, 80); CGContextStrokePath(context);*/ CGContextSetStrokeColorWithColor(context,color); CGRect rectangle2 = CGRectMake(80, 90, 50, 8); CGContextAddEllipseInRect(context, rectangle2); CGContextStrokePath(context); CGContextSetStrokeColorWithColor(context,color); CGRect rectangle3 = CGRectMake(180, 90, 50, 8); CGContextAddEllipseInRect(context, rectangle3); CGContextStrokePath(context); CGContextSetStrokeColorWithColor(context,color); CGContextMoveToPoint(context, 155,120); CGContextAddLineToPoint(context, 155,160); CGContextStrokePath(context); /*CGContextSetStrokeColorWithColor(context, color); CGRect rectangle4 = CGRectMake(130, 180, 50,8); CGContextAddEllipseInRect(context, rectangle4); CGContextStrokePath(context);*/ /*CGContextSetStrokeColorWithColor(context,color); CGContextMoveToPoint(context, 120,180); CGContextAddLineToPoint(context, 190,180); CGContextStrokePath(context);*/ int value = (int)(slider.value); if(value == 25) { CGContextMoveToPoint(context, 120,180); CGContextAddArcToPoint(context, 190 , 180, 250 , 180, 0 ); CGContextStrokePath(context); } }

    Read the article

  • Installing List Compenent on Sharepoint Server

    - by Tom
    I added the Sharepoint site to the 'Document Management' section in CRM with the List Components checked and it added it with no problem. Also when I navigate to the 'Documents' section under an account it shows up with the format of the List components. However, if i click on 'New' or 'Actions' I get the following error message: An Error has occured in the script on this page. Error: Access is denied URL: https://*serveraddress*/crmgrid/scripts/crmmenu.htc Do you want to continue running scripts on this page? I have ran the power script which added the MIME .htc extention to IIS. Does anyone know what might be wrong?

    Read the article

  • Lightweight Live Linux Image

    - by MA1
    I am working on an application which is being developed in wxPython and C plus using linux core utilities and network support. To be more specific, I only need the following support for following packages/softwares/components. wxPython C Network Support Linux Utilities Vi File System(fdisk/parted, ntfsprogs etc) Basic(cp, mount/umount, mkdir etc) The application will run from a live CD. Currently i am using Fedora 12 with Gnome for live CD. Currently the size of live image is around 350 MB. The size of application is hardly 1 MB. I don't need anything else except above mentioned. Just my application and supporting packages, no desktop etc. So, I need a Lightweight Linux image as smaller as possible providing all the above mentioned packages/components. I am considering the following distributions: Xfce LXDE Fluxbox Enlightenment Any ideas/suggestions?

    Read the article

  • Where lies the soul of a computer?

    - by Christian
    When you take the system drive and put it in a new box, do you rename it or do you keep the name? And when you put a fresh drive in the old box, do you give it a new name? What is with upgrading? How many of the components do you have to change until a computer loses its identity? So a CPU is often described as the heart or the brain of a computer but where lies its soul? What determines its identity? The data on the system drive? The majority of its components? This might sound like a not-so-serious question and it probably is but whom of you didn't already face this problem?

    Read the article

  • Cannot install FrontPage 2002 Server Extensions on Server 2003

    - by Sentax
    Hi everyone, I've followed the Microsoft article to install FPSE 2002 on my Windows 2003 server: To install and enable FrontPage 2002 Server Extensions 1. From the Start menu, click Control Panel. 2. Double-click Add or Remove Programs. 3. Click Add/Remove Windows Components. 4. In the Windows Components Wizard, double-click Application Server, double-click Internet Information Services, and then select the FrontPage 2002 Server Extensions check box. 5. Click OK twice, click Next, and then click Finish. But on step 4 "FrontPage 2002 Server Extensions" does not show up in the list in the IIS details window. How do I get FPSE 2002 installed on my server? From what I can understand it's supposed to be there and I just have to enable it. But that's not an option for me. Thanks.

    Read the article

  • Broken corba object references

    - by cube
    I'm working on a homework and got stuck. The task is to serve objects using a default servant. But when I try to use the reference, weird things happen. Some part of corba prints a stack trace, but no exception is thrown. The problem happens when the server receives the reference and should call some method on it. The reference is then shortened and doesn't contain the object ID (which means that my servant implementation can't do anything reasonable). This is the implementation of the servant, where the problem appears: public class ModelFileImpl extends ModelFilePOA{ @Override public String getName() { try { return new String(_poa().reference_to_id(_this_object())); } catch (Throwable e) {} assert false; return null; } } If I take _this_object().toString() inside the try block and put it into dior -i i get this: ------IOR components----- TypeId : IDL:termproject/idl/ModelFile:1.0 TAG_INTERNET_IOP Profiles: Profile Id: 0 IIOP Version: 1.2 Host: 127.0.0.1 Port: 45954 Object key (URL): %AF%AB%CB%00%00%00%00%20Q%BA%F4%FF%00%00%00%01%00%00%00%00%00%00%00%01%0000%00%08RootPOA%00%00%00%00%08%00%00%00%02%00%00%00%00%14 Object key (hex): 0xAF AB CB 00 00 00 00 20 51 BA F4 FF 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 08 52 6F 6F 74 50 4F 41 00 00 00 00 08 00 00 00 02 00 00 00 00 14 -- Found 2 Tagged Components-- #0: TAG_CODE_SETS ForChar native code set Id: ISO8859_1 Char Conversion Code Sets: UTF8 , Unknown TCS: 10020 ForWChar native code set Id: UTF16 WChar Conversion Code Sets: Unknown TCS: 10100 Unknown tag : 38 however the part of server that makes the reference and the client see the reference as ------IOR components----- TypeId : IDL:termproject/idl/ModelFile:1.0 TAG_INTERNET_IOP Profiles: Profile Id: 0 IIOP Version: 1.2 Host: 127.0.0.1 Port: 45954 Object key (URL): %AF%AB%CB%00%00%00%00%20Q%BA%F4%FF%00%00%00%01%00%00%00%00%00%00%00%02%00%00%00%08RootPOA%00%00%00%00%09modelPoa%00%00%00%00%00%00%00%10testModel1.MyIDL%14 Object key (hex): 0xAF AB CB 00 00 00 00 20 51 BA F4 FF 00 00 00 01 00 00 00 00 00 00 00 02 00 00 00 08 52 6F 6F 74 50 4F 41 00 00 00 00 09 6D 6F 64 65 6C 50 6F 61 00 00 00 00 00 00 00 10 74 65 73 74 4D 6F 64 65 6C 31 2E 4D 79 49 44 4C 14 -- Found 2 Tagged Components-- #0: TAG_CODE_SETS ForChar native code set Id: ISO8859_1 Char Conversion Code Sets: UTF8 , Unknown TCS: 10020 ForWChar native code set Id: UTF16 WChar Conversion Code Sets: Unknown TCS: 10100 Unknown tag : 38 ("modelPoa" (the name of the poa working with default clients) and "testModel1.MyIDL" (the identifier of the object) in the object key are missing in the first one) I've tried sniffing the traffic and found out that the client still sends the correct reference. This is how i create the references: ret[i] = ModelFileHelper.narrow(modelFilePoa.create_reference_with_id(files[i].getBytes(), ModelFileHelper.id())); And this is how i set up the server: // init ORB ORB orb = ORB.init(args, null); // init POA POA poa = POAHelper.narrow(orb.resolve_initial_references("RootPOA")); // create the POA for the models. Policy[] policies = { poa.create_request_processing_policy(RequestProcessingPolicyValue.USE_DEFAULT_SERVANT), poa.create_servant_retention_policy(ServantRetentionPolicyValue.NON_RETAIN), poa.create_id_assignment_policy(IdAssignmentPolicyValue.USER_ID) }; POA modelPoa = poa.create_POA("modelPoa", poa.the_POAManager(), policies); modelPoa.the_POAManager().activate(); modelPoa.set_servant(new ModelFileImpl()); modelPoa.the_POAManager().activate(); ModelStoreImpl impl = new ModelStoreImpl(modelPoa); // create the object reference org.omg.CORBA.Object obj = poa.servant_to_reference(impl); // ... store the IOR file ... orb.run(); I'd be really grateful for any pointers (or references :-) )

    Read the article

  • Windows 2000 under Windows 7 Virtual PC not working correctly

    - by dave
    I have just moved my Windows 2000 Virtual PCs from Vista to Windows 7 Professional (64-bit). The machines work to a point but I have found some problems: drive mapping does not seem to work any more. I need this to exchange data. I do not need network access to the virtual PC so would rather leave it unconnected. the virtual PC would automatically shutdown the session and go to the login screen after a few minutes of inactivity. I tried installing the Virtual PC Integration Components but the install failed (one of the messages basically says it's XP+ only). Now I'm stuck in 640x480 mode with mouse capture. I have heard that you can install an older version of the Integration Components but this sounds a bit suspect. Does anyone have any ideas on how to get Windows2000 working with drive sharing on a Virtual PC?

    Read the article

  • Bypassing "Found New Hardware Wizard" / Setting Windows to Install Drivers Automatically

    - by Synetech inc.
    Hi, My motherboard finally died after the better part of a decade, so I bought a used system. I put my old hard-drive and sound-card in the new system, and connected my old keyboard and mouse (the rest of the components—CPU, RAM, mobo, video card—are from the new system). I knew beforehand that it would be a challenge to get Windows to boot and install drivers for the new hardware (particularly since the foundational components are new), but I am completely unable to even attempt to get through the work of installing drivers for things like the video card because the keyboard and mouse won't work (they do work, in the BIOS screen, in DOS mode, in Windows 7, in XP's boot menu, etc., just not in Windows XP itself). Whenever I try to boot XP (in normal or safe mode), I get a bunch of balloons popping up for all the new hardware detected, and a New Hardware Found Wizard for Processor (obviously it has to install drivers for the lowest-level components on up). Unfortunately I cannot click Next since the keyboard and mouse won't work yet because the motherboard drivers (for the PS/2 or USB ports) are not yet installed. I even tried a serial mouse, but to no avail—again, it does work in DOS, 7, etc., but not XP because it doesn't have the serial port driver installed. I tried mounting the SOFTWARE and SYSTEM hives under Windows 7 in order to manually set the "unsigned drivers warning" to ignore (using both of the driver-signing policy settings that I found references to). That didn't work; I still get the wizard. They are not even fancy, proprietary, third-party, or unsigned drivers. They are drivers that come with Windows—as the drivers for CPU, RAM, IDE controller, etc. tend to be. And the keyboard and mouse drivers are the generic ones at that (but like I said, those are irrelevant since the drivers for the ports that they are connected to are not yet installed). Obviously at some point in time over the past several years, a setting got changed to make Windows always prompt me when it detects new hardware. (It was also configured to show the Shutdown Event Tracker on abnormal shutdowns, so I had to turn that off so that I could even see the desktop.) Oh, and I tried deleting all of the PNF files so that they get regenerated, but that too did not help. Does anyone know how I can reset Windows to at least try to automatically install drivers for new hardware before prompting me if it fails? Conversely, does anyone know how exactly one turns off automatic driver installation (and prompt with the wizard)? Thanks a lot.

    Read the article

  • Can you suggest some DIY PC specs for 1) Value, and 2) Future 'upgradability'?

    - by user17381
    Hi, I'm considering building a new desktop PC from components. For the last 7/8 or so years I have almost exlusively used laptops, and so have fallen behind a bit with knowledge of various hardware technologies. Anyway, now I'm considering building a new desktop machine. Mainly for development work, but also would be nice to do a bit of gaming. The two main criteria are: I would like the first build to be relatively low cost. I would like to select components that will allow me to upgrade in the future without throwing too much away. Can anyone recommend a setup? Thanks

    Read the article

  • How do I extract files from one tarball to another tarball in one step?

    - by Martin
    I have some fairly large tarball archives, from which I need to extract some files. I will later repack those files to transfer them to another server. Currently that is a two (multi) step process for me: mkdir ttmp tar -vxzf large.tgz -C ttmp/ --strip-components=<INT> <folder-to-be-extracted> or alternatively with wildcards mkdir ttmp tar -vxzf large.tgz -C ttmp/ --strip-components=<INT> \ --wildcards --no-anchored '*pattern*' Then I go ahead and recompress the created folder tar -vczf small.tgz ttmp/* rm -rf ttmp How can I combine these two commands into one? Like this tar -x large.tgz > tar -c small.tgz Just to show, what I already tried: Whenever I search the terms "extract" I will end up here or here or even here. When I use the term "split" I will end up here and that is definitely not what I intend to do. When I use "repack" I end up in strange places.

    Read the article

  • COM+ applications deployment behaves different on different systems

    - by sharptooth
    In order to give my COM+ application enough credentials I want its components to be instantiated under "Local Service" account. When I create a server application with a wizard on Win2k3 it offers to choose under whom to instantiate components - "Local Service" is one of choices. But on WinXP "Local Service" is not offered at all in the wizard. When I open the "Identity" tab of the COM+ application under Win2k3 there'a a handful of choises, "Local Service" included, and I can select any of them. But on WinXP the same "Identity" tab only offers "Interactive user". What does this difference depend on? Does it depend on the system or on something else?

    Read the article

  • Cannot start IIS on XP64 Professional

    - by headsling
    I have enabled the iis components for the first time on this machine, from control panel-add software-windows components, and rebooted. When I attempt to start the "Default Web Site" (which shows as 'Default Web Site (Stopped)' ) from inetmgr nothing happens.. no errors, nothing in the event log. Regmon and Filemon show no obvious errors. I've confirmed that nothing is running on port 80 and have tried changing the local port (8080, 8081 etc.,) with no effect. Further info -- I have removed the install, rebooted, added it back in, rebooted ... still not working. I have visual studio 2008, SQLServer 2008 installed.

    Read the article

  • What are the principles of developing web-applications with action-based java frameworks?

    - by Roman
    Background I'm going to develop a new web-application with java. It's not very big or very complex and I have enough time until it'll "officially" start. I have some JSF/Facelets development background (about half a year). And I also have some expirience with JSP+JSTL. In self-educational purpose (and also in order to find the best solution) I want to prototype the new project with one of action-based frameworks. Actually, I will choose between Spring MVC and Stripes. Problem In order to get correct impression about action-based frameworks (in comparison with JSF) I want to be sure that I use them correctly (in bigger or lesser extent). So, here I list some most-frequent tasks (at least for me) and describe how I solve them with JSF. I want to know how they should be solved with action-based framework (or separately with Spring MVC and Stripes if there is any difference for concrete task). Rendering content: I can apply ready-to-use component from standard jsf libraries (core and html) or from 3rd-party libs (like RichFaces). I can combine simple components and I can easily create my own components which are based on standard components. Rendering data (primitive or reference types) in the correct format: Each component allow to specify a converter for transforming data in both ways (to render and to send to the server). Converter is, as usual, a simple class with 2 small methods. Site navigation: I specify a set of navigation-cases in faces-config.xml. Then I specify action-attribute of a link (or a button) which should match one or more of navigation cases. The best match is choosen by JSF. Implementing flow (multiform wizards for example): I'm using JSF 1.2 so I use Apache Orchestra for the flow (conversation) scope. Form processing: I have a pretty standard java-bean (backing bean in JSF terms) with some scope. I 'map' form fields on this bean properties. If everything goes well (no exceptions and validation is passed) then all these properties are set with values from the form fields. Then I can call one method (specified in button's action attribute) to execute some logic and return string which should much one of my navigation cases to go to the next screen. Forms validation: I can create custom validator (or choose from existing) and add it to almost each component. 3rd-party libraries have sets of custom ajax-validators. Standard validators work only after page is submitted. Actually, I don't like how validation in JSF works. Too much magic there. Many standard components (or maybe all of them) have predefined validation and it's impossible to disable it (Maybe not always, but I met many problems with it). Ajax support: many 3rd-party libraries (MyFaces, IceFaces, OpenFaces, AnotherPrefixFaces...) have strong ajax support and it works pretty well. Until you meet a problem. Too much magic there as well. It's very difficult to make it work if it doesn't work but you've done right as it's described in the manual. User-friendly URLs: people say that there are some libraries for that exist. And it can be done with filters as well. But I've never tried. It seems too complex for the first look. Thanks in advance for explaning how these items (or some of them) can be done with action-based framework.

    Read the article

  • Re-cased my computer now the power plug keeps shorting

    - by dunc
    I've just re-cased my computer. I got the new case free and thought I'd be able to swap everything over myself but apparently I've done something wrong. I'm OK with components generally but wasn't totally confident about doing this. So, my question is, when setting up a new PC or moving old components into a new case, what could I have done which causes the power cable plug to short/fuse when I plug it in?. Is this likely to be an issue with the cables from my PSU, or could it be the internal case connectors? What steps would you take to diagnose the problem? I'd rather not start again if I don't have to...! Thanks in advance,

    Read the article

  • Debugging COM+ applications

    - by cc0
    I have a number of separate COM+ applications that I have to figure out; The COM+ applications respond to a number of scheduled tasks, and I need to know which COM components within which applications are being used when I execute each of these tasks. It is easy to figure out what (if anything) goes wrong in the event log, but as I am working on testing each components compatibility with the others; I need to know which ones I have actually tested by executing the scheduled tasks. Does anyone have some useful tips here? I've been looking into the sysinternals tools, and specifically processmonitor, but I have not found a way to make it monitor the COM+ applications yet. (I initially started this question here, but realized it's probably more suited for serverfault)

    Read the article

  • Installing AJAX Control Toolkit 4 in Visual Studio 2010

    - by Yousef_Jadallah
      In this tutorial I’ll show you how to install AJAX Control toolkit step by step: You can download AJAX Toolkit .NET 4 “Apr 12 2010” released before 4 days, from http://ajaxcontroltoolkit.codeplex.com/releases/view/43475#DownloadId=116534, Once downloaded, extract AjaxControlToolkit.Binary.NET4  on your computer, then extract AjaxControlToolkitSampleSite. after that you need to open Visual Studio 2010, So we will add the toolkit to the toolbox. To do that press right-click in an empty space on your toolbox, then choose Add Tab.     You can rename the new tab to be “Ajax Toolkit” for example : Then when it is added, right-click under the tab and select Choose Items: When the dialog box appears Choose .NET Framework Components tab then click Browse button and find  AjaxControlToolkit folder that you installed the  AJAX Control Toolkit. In that directory you will find a sub-directory called AjaxControlToolkitSampleSite, and under that folder you will find bin Folder, in this folder choose AjaxControlToolkit.DLL which 5.59 MB.   The result of these steps, Visual Studio will load all the controls from the DLL file and by default it will be checked in this list:   To submit your steps press OK button.   Ultimately,you can find the components in your Toolbox and you can use it.     Happy programming!

    Read the article

  • Installing UCMA 3.0 and Creating a Communications Server "14"Trusted Application Pool

    A lot of setup and administration tasks have gotten a lot easier in Communications Server 14; one of them is building an application server to develop and run your UCMA 3.0 applications on. In this post, Ill walk you through installing the UCMA 3.0 Core SDK and creating a Trusted Application Pool on the server, thus adding it to the Communications Server 14 topology and allowing you to host and run UCMA 3.0 applications on it. Note: These instructions will change slightly as the bits get updated for the eventual Beta release I will update this post as soon as I get a chance to run this setup on a more recent build. Im doing the install on a simple Communications Server 14 topology consisting of the following Windows Server 2008 R2 Hyper-V images: DC Domain Controller ExchangeUM Exchange Server 2010 CS-SE Microsoft Communications Server 2010 Standard Edition TS Development machine Ill walk through setting up UCMA 3.0 on the TS VM, which is a fully patched Windows Server 2008 R2 machine that is joined to the Fabrikam domain.   Im also running Visual Studio 2010 on this VM because I intend to use it as a development machine.  In a future post, Ill walk through installing just the UCMA 3.0 run time to build a true production UCMA application server. Im making a couple of assumptions here: You have an existing CS 2010 site and cluster configured(well look at this in a future post) Youre starting with a fully patched Windows Server 2008 R2 machine The machine is joined to your domain This walkthrough was done in my Fabrikam VM environment but can easily be modified for your own environment. Installing the UCMA 3.0 SDK Lets start by installing the UCMA 3.0 SDK.  Run UcmaSdkWebDownload.msi to kick off the SDK installer package extract process. The installed package is extracted to C: >> Program Files >> Microsoft UCMA 3.0 >> SDK Installer Package.  Browse there and run setup.exe. Click Install to install the UCMA 3.0 Core SDK and Workflow SDK. Install Communications Server Core Components UCMA 3.0 introduces a new concept called Auto-provisioning, which is most easily explained from the developer point of view.  Remember what your app.config looked it in UCMA 2.0?  You had to store the application GRUU, the trusted contact SIP Uri, the port for your application, and the name of the certificate authority. Thats all gone with auto-provisioning all you need in your app.config is your ApplicationId, e.g.: urn:application:MyApplication. How does CS 2010 do this? All of the applications configuration data is associated with the applications id.  UCMA also queries a replicated copy of the Central Management Database to retrieve the applications configuration data and also the configuration data for any endpoints. In this step, well run Bootstrapper.exe to install the CS Core components, this checked for the following components and installs them if they are not already present: VcRedist Sqlexpress Sqlnativeclient Sqlbackcompat Ucmaredist OcsCore.msi Open a command window at C: >> Program Files >> Microsoft Communications Server 2010 >> Deployment and run the following command: Bootstrapper.exe /BootstrapReplica /MinCache /SourceDirectory:"%ProgramFiles%\Microsoft UCMA 3.0\SDK Installer Package\Prereq\BootstrapperCache" Create a New Trusted Application Pool The next step is to create a new trusted application pool for the new server.  Fire up the Communications Server Management Shell from Start >> Microsoft Communications Server 2010 >> Communications Server Management Shell and enter the following PowerShell command: New-CsTrustedApplicationPool -Identity <FQDN of Server> -Registrar <FQDN of CS Server> -Site <CS Site Name> Verify that the new server was added to the CS topology by running the following PowerShell command: (Get-CsTopology -AsXml).ToString() > Topology.xml This created a file called Topology.xml in the directory that you ran the command from.  Open the file and find the Clusters section and look for a node for the new server. The Cluster Fqdn is the name of your server, and note the name of the Site that this Cluster is a part of. <Cluster Fqdn="appsrv.fabrikam.com" RequiresReplication="true" RequiresSetup="true"> <ClusterId SiteId="UcMarketing2" Number="5" /> <Machine OrdinalInCluster="1" Fqdn="appsrv.fabrikam.com"> <NetInterface InterfaceSide="Primary" InterfaceNumber="1" IPAddress="0.0.0.0" /> </Machine> </Cluster> Configure CS Management Store Replication At this point, we have the CS Core components installed and the server configured as a trusted application pool.  We now need to set up replication so that the Central Management Store replicates down to the new server. From the Communications Server Management Shell, run the following PowerShell command to enable the Replica service on the new server: Enable-CSReplica The Replica service is enabled, but hasn't done anything yet. This can be verified by running the following PowerShell command to check the replication status for the various servers in the topology: Get-CSManagementStoreReplicationStatus You can see in the screenshot below that the UpToDate property of the new server is still False Run the following PowerShell command to force the replication to run: Invoke-CSManagementStoreReplicationStatus Run Get-CSManagementStoreReplicationStatus again to verify that the new service is now up to date Request and Set a New Certificate The last step in the process is to request a new certificate from the certificate authority on the domain and assign it to the new server. From the Communications Server Management Shell, run the following PowerShell command to request a new certificate: Request-CSCertificate -Action new -Type default -CA <Domain Controller FQDN>\<Certificate Authority> Setting the -Verbose switch on the cmdlet creates an Xml file with its output. Open the Xml file and copy the thumbprint of the generated certificate. <?xml version="1.0" encoding="utf-8"?> <Action Name="Request-CsCertificate" Time="20100512T212258"> <Action Name="Request-CsCertificate" Time="20100512T212258"> <Info Title="Connection" Time="20100512T212258">Data Source=(local)\rtclocal;Initial Catalog=xds;Integrated Security=True</Info> <Action Time="20100512T212258"> <Info Title="Certificate use" Time="20100512T212258">urn:certref:default</Info> <Info Title="Subject distinguished name" Time="20100512T212258">CN="appsrv2.fabrikam.com"</Info> <Info Time="20100512T212259">The certificate request is submitted to the Certification Authority dc.fabrikam.com\FabrikamCA.</Info> <Info Time="20100512T212259">The certificate was issued.</Info> <Info Time="20100512T212259">The certificate was imported with thumbprint AFC3C46E459C1A39AD06247676F3555826DBF705.</Info> <Complete Time="20100512T212259" /> </Action> <Info Title="command status" Time="20100512T212259">Command execution processing completed</Info> <Action Name="DeploymentXdsCmdlet.SaveCachedItems" Time="20100512T212259"> <Info Time="20100512T212259">0 updates</Info> <Complete Time="20100512T212259" /> </Action> <Info Title="command status" Time="20100512T212259">Command has completed</Info> </Action> </Action> Run the following PowerShell command to set the certificate: Set-CsCertificate -Type Default -Thumbprint <Thumbprint> Wrapping Up You now have a new UCMA 3.0 application server in your Communications Server 2010 server topology.  You can provision trusted applications and trusted application endpoints on the new server using the Communications Server 2010 Management Shell.  Well take a look at how to do that in another post. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • EPM Infrastructure Tuning Guide v11.1.2.2 / 11.1.2.3

    - by Ahmed Awan
    Applies To: This edition applies to only 11.1.2.2, 11.1.2.3. One of the most challenging aspects of performance tuning is knowing where to begin. To maximize Oracle EPM System performance, all components need to be monitored, analyzed, and tuned. This guide describe the techniques used to monitor performance and the techniques for optimizing the performance of EPM components. TOP TUNING RECOMMENDATIONS FOR EPM SYSTEM: Performance tuning Oracle Hyperion EPM system is a complex and iterative process. To get you started, we have created a list of recommendations to help you optimize your Oracle Hyperion EPM system performance. This chapter includes the following sections that provide a quick start for performance tuning Oracle EPM products. Note these performance tuning techniques are applicable to nearly all Oracle EPM products such as Financial PM Applications, Essbase, Reporting and Foundation services. 1. Tune Operating Systems parameters. 2. Tune Oracle WebLogic Server (WLS) parameters. 3. Tune 64bit Java Virtual Machines (JVM). 4. Tune 32bit Java Virtual Machines (JVM). 5. Tune HTTP Server parameters. 6. Tune HTTP Server Compression / Caching. 7. Tune Oracle Database Parameters. 8. Tune Reporting And Analysis Framework (RAF) Services. 9. Tune Oracle ADF parameters. Click to Download the EPM 11.1.2.3 Infrastructure Tuning Whitepaper (Right click or option-click the link and choose "Save As..." to download this pdf file)

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >