Search Results

Search found 2816 results on 113 pages for 'dell boy'.

Page 41/113 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • IRQ Conflicts Causing Video Card and Boot Problems?

    - by sanpatricio
    tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

    Read the article

  • ubuntu 12.04 LTS hangs on boot when external monitor is connected

    - by vladeta
    I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

    Read the article

  • 12.04 Taking forever for no apparent reason

    - by Sam
    First off, I'd just like to say how much I'm loving Ubuntu so far. It's one of my first steps into Linux, but so far it's blown away Windows in almost every regard. Now, onto my problem. My brothers have some old Dell Dimensions that are barely clinging to life. They were both running XP Home Premium. The 2400 installed just fine, no issues at all. Now, the other computer, the 3000 isn't clearing the screen with the Ubuntu logo and the pulsing dots. I've tried multiple discs, including the exact same one that gave me no issue in the other computer, and I'm at a loss. Does anyone have any suggestions as to where the problem might lay? They're both 32 bit Intel processors, and it's the correct version of Ubuntu. Is it a bad disc drive? Hardware incompatibility? Thanks for any assistance that can be provided. Dell Dimension 2400 Dell Dimension 3000

    Read the article

  • Dual displays not working - NVidia - Ubuntu 12.04 - Second Monitor - Two Screens

    - by user75105
    Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.04 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

    Read the article

  • Dual displays not working - NVidia - Ubuntu 12.4

    - by user75105
    Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.4 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

    Read the article

  • Oracle VM Forum????????!?????????????? "??????·????" ??????

    - by rika.tokumichi
    ??????OTN????????? 2010?5?18?????????????????Oracle VM Forum?????????? ?????????????????????????????????? ?????????????????????????????????·?????????????????????????????????????????????????????????????????????????·???????????????????????????????????????????? ??????????4?????????? ????????(?????)???????????·???????~???????????????? 5????~ ?????!????????·????????????????????? ????????????·?????????~???????????????????????~ ????????????????????~????????·????????????????~ ????????????????? ????????????????????????????????OTN?????????????????????????????????????????????????????????Fusion Middleware?????? - Fusion Middleware???????? ????????????????????????????????^^ ???????????????????????????????????? ------------------------------ ?????!????????·????????????????????? ????????????????????????????Xen???????????????? ???Oracle VM for x86?Xen???????????????Xen 4.0????????Oracle VM???????????????????????????????????????Dell PowerEdge R910(CPU 32?????? 64GB)????????? ??????????????????VM????????????????????????????????????????????·???????????????????? ??????????4GB??????·????????????????????·????????????????? ???????VM1???????????????????????VM 30????VM 60?????????????????????? ?????????????????????????????????????VM?????????????????????? ?????????????Self-Ballooning?Transcendent Memory?????????????????????????????????????????????????????????? >Xen??????????????? ????????????????????????Dell PowerEdge R810?????????????????????2U??????????????CPU 32??????????·????32??????????? ----------------------------- ????????????????????~????????·????????????????~ ???????????????????(AP)???????????????????????????????????????????????????????????????????????????????????????????????? ????????????AP????????????????????????? ?????????????????????????????????AP????·????????????????????????????????????????AP·????·????????????????????????????????????? ???????????EC???????????????????????????????????? ????????????????????2?????? ???Oracle Virtual Assembly Builder? ????(Web?AP?DB)????????????????????????????????????????????? ???Oracle WebLogic Server on JRockit Virtual Edition? ????OS?????????????????JVM?????OS????????????????????(?????????????)?????????????????????????? ----------------------------- ??????????????????? >?????????????? ?????????????(??????)?????????????????????????? ?????????????????????????! ?????????????????????????????????????????????????????????

    Read the article

  • The enterprise vendor con - connecting SSD's using SATA 2 (3Gbits) thus limiting there performance

    - by tonyrogerson
    When comparing SSD against Hard drive performance it really makes me cross when folk think comparing an array of SSD running on 3GBits/sec to hard drives running on 6GBits/second is somehow valid. In a paper from DELL (http://www.dell.com/downloads/global/products/pvaul/en/PowerEdge-PowerVaultH800-CacheCade-final.pdf) on increasing database performance using the DELL PERC H800 with Solid State Drives they compare four SSD drives connected at 3Gbits/sec against ten 10Krpm drives connected at 6Gbits [Tony slaps forehead while shouting DOH!]. It is true in the case of hard drives it probably doesn’t make much difference 3Gbit or 6Gbit because SAS and SATA are both end to end protocols rather than shared bus architecture like SCSI, so the hard drive doesn’t share bandwidth and probably can’t get near the 600MiBytes/second throughput that 6Gbit gives unless you are doing contiguous reads, in my own tests on a single 15Krpm SAS disk using IOMeter (8 worker threads, queue depth of 16 with a stripe size of 64KiB, an 8KiB transfer size on a drive formatted with an allocation size of 8KiB for a 100% sequential read test) I only get 347MiBytes per second sustained throughput at an average latency of 2.87ms per IO equating to 44.5K IOps, ok, if that was 3GBits it would be less – around 280MiBytes per second, oh, but wait a minute [...fingers tap desk] You’ll struggle to find in the commodity space an SSD that doesn’t have the SATA 3 (6GBits) interface, SSD’s are fast not only low latency and high IOps but they also offer a very large sustained transfer rate, consider the OCZ Agility 3 it so happens that in my masters dissertation I did the same test but on a difference box, I got 374MiBytes per second at an average latency of 2.67ms per IO equating to 47.9K IOps – cost of an 240GB Agility 3 is £174.24 (http://www.scan.co.uk/products/240gb-ocz-agility-3-ssd-25-sata-6gb-s-sandforce-2281-read-525mb-s-write-500mb-s-85k-iops), but that same drive set in a box connected with SATA 2 (3Gbits) would only yield around 280MiBytes per second thus losing almost 100MiBytes per second throughput and a ton of IOps too. So why the hell are “enterprise” vendors still only connecting SSD’s at 3GBits? Well, my conspiracy states that they have no interest in you moving to SSD because they’ll lose so much money, the argument that they use SATA 2 doesn’t wash, SATA 3 has been out for some time now and all the commodity stuff you buy uses it now. Consider the cost, not in terms of price per GB but price per IOps, SSD absolutely thrash Hard Drives on that, it was true that the opposite was also true that Hard Drives thrashed SSD’s on price per GB, but is that true now, I’m not so sure – a 300GByte 2.5” 15Krpm SAS drive costs £329.76 ex VAT (http://www.scan.co.uk/products/300gb-seagate-st9300653ss-savvio-15k3-25-hdd-sas-6gb-s-15000rpm-64mb-cache-27ms) which equates to £1.09 per GB compared to a 480GB OCZ Agility 3 costing £422.10 ex VAT (http://www.scan.co.uk/products/480gb-ocz-agility-3-ssd-25-sata-6gb-s-sandforce-2281-read-525mb-s-write-410mb-s-30k-iops) which equates to £0.88 per GB. Ok, I compared an “enterprise” hard drive with a “commodity” SSD, ok, so things get a little more complicated here, most “enterprise” SSD’s are SLC and most commodity are MLC, SLC gives more performance and wear, I’ll talk about that another day. For now though, don’t get sucked in by vendor marketing, SATA 2 (3Gbit) just doesn’t cut it, SSD need 6Gbit to breath and even that SSD’s are pushing. Alas, SSD’s are connected using SATA so all the controllers I’ve seen thus far from HP and DELL only do SATA 2 – deliberate? Well, I’ll let you decide on that one.

    Read the article

  • How to capture live camera frames in RGB with DirectShow

    - by Jonny Boy
    I'm implementing live video capture through DirectShow for live processing and display. (Augmented Reality app). I can access the pixels easily enough, but it seems I can't get the SampleGrabber to provide RGB data. The device (an iSight -- running VC++ Express in VMWare) only reports MEDIASUBTYPE_YUY2. After extensive Googling, I still can't figure out whether DirectShow is supposed to provide built-in color space conversion for this sort of thing. Some sites report that there is no YUV<-RGB conversion built in, others report that you just have to call SetMediaType on your ISampleGrabber with an RGB subtype. Any advice is greatly appreciated, I'm going nuts on this one. Code provided below. Please note that The code works, except that it doesn't provide RGB data I'm aware that I can implement my own conversion filter, but this is not feasible because I'd have to anticipate every possible device format, and this is a relatively small project // Playback IGraphBuilder *pGraphBuilder = NULL; ICaptureGraphBuilder2 *pCaptureGraphBuilder2 = NULL; IMediaControl *pMediaControl = NULL; IBaseFilter *pDeviceFilter = NULL; IAMStreamConfig *pStreamConfig = NULL; BYTE *videoCaps = NULL; AM_MEDIA_TYPE **mediaTypeArray = NULL; // Device selection ICreateDevEnum *pCreateDevEnum = NULL; IEnumMoniker *pEnumMoniker = NULL; IMoniker *pMoniker = NULL; ULONG nFetched = 0; HRESULT hr = CoInitializeEx(NULL, COINIT_MULTITHREADED); // Create CreateDevEnum to list device hr = CoCreateInstance(CLSID_SystemDeviceEnum, NULL, CLSCTX_INPROC_SERVER, IID_ICreateDevEnum, (PVOID *)&pCreateDevEnum); if (FAILED(hr)) goto ReleaseDataAndFail; // Create EnumMoniker to list devices hr = pCreateDevEnum->CreateClassEnumerator(CLSID_VideoInputDeviceCategory, &pEnumMoniker, 0); if (FAILED(hr)) goto ReleaseDataAndFail; pEnumMoniker->Reset(); // Find desired device while (pEnumMoniker->Next(1, &pMoniker, &nFetched) == S_OK) { IPropertyBag *pPropertyBag; TCHAR devname[256]; // bind to IPropertyBag hr = pMoniker-&gt;BindToStorage(0, 0, IID_IPropertyBag, (void **)&amp;pPropertyBag); if (FAILED(hr)) { pMoniker-&gt;Release(); continue; } VARIANT varName; VariantInit(&amp;varName); HRESULT hr = pPropertyBag-&gt;Read(L"DevicePath", &amp;varName, 0); if (FAILED(hr)) { pMoniker-&gt;Release(); pPropertyBag-&gt;Release(); continue; } char devicePath[DeviceInfo::STRING_LENGTH_MAX] = ""; wcstombs(devicePath, varName.bstrVal, DeviceInfo::STRING_LENGTH_MAX); if (strcmp(devicePath, deviceId) == 0) { // Bind Moniker to Filter pMoniker-&gt;BindToObject(0, 0, IID_IBaseFilter, (void**)&amp;pDeviceFilter); break; } pMoniker-&gt;Release(); pPropertyBag-&gt;Release(); } if (pDeviceFilter == NULL) goto ReleaseDataAndFail; // Create sample grabber IBaseFilter *pGrabberF = NULL; hr = CoCreateInstance(CLSID_SampleGrabber, NULL, CLSCTX_INPROC_SERVER, IID_IBaseFilter, (void**)&pGrabberF); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGrabberF->QueryInterface(IID_ISampleGrabber, (void**)&pGrabber); if (FAILED(hr)) goto ReleaseDataAndFail; // Create FilterGraph hr = CoCreateInstance(CLSID_FilterGraph, NULL, CLSCTX_INPROC, IID_IGraphBuilder, (LPVOID *)&pGraphBuilder); if (FAILED(hr)) goto ReleaseDataAndFail; // create CaptureGraphBuilder2 hr = CoCreateInstance(CLSID_CaptureGraphBuilder2, NULL, CLSCTX_INPROC, IID_ICaptureGraphBuilder2, (LPVOID *)&pCaptureGraphBuilder2); if (FAILED(hr)) goto ReleaseDataAndFail; // set FilterGraph hr = pCaptureGraphBuilder2->SetFiltergraph(pGraphBuilder); if (FAILED(hr)) goto ReleaseDataAndFail; // get MediaControl interface hr = pGraphBuilder->QueryInterface(IID_IMediaControl, (LPVOID *)&pMediaControl); if (FAILED(hr)) goto ReleaseDataAndFail; // Add filters hr = pGraphBuilder->AddFilter(pDeviceFilter, L"Device Filter"); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGraphBuilder->AddFilter(pGrabberF, L"Sample Grabber"); if (FAILED(hr)) goto ReleaseDataAndFail; // Set sampe grabber options AM_MEDIA_TYPE mt; ZeroMemory(&mt, sizeof(AM_MEDIA_TYPE)); mt.majortype = MEDIATYPE_Video; mt.subtype = MEDIASUBTYPE_RGB32; hr = pGrabber->SetMediaType(&mt); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGrabber->SetOneShot(FALSE); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGrabber->SetBufferSamples(TRUE); if (FAILED(hr)) goto ReleaseDataAndFail; // Get stream config interface hr = pCaptureGraphBuilder2->FindInterface(NULL, &MEDIATYPE_Video, pDeviceFilter, IID_IAMStreamConfig, (void **)&pStreamConfig); if (FAILED(hr)) goto ReleaseDataAndFail; int streamCapsCount = 0, capsSize, bestFit = -1, bestFitPixelDiff = 1000000000, desiredPixelCount = _width * _height, bestFitWidth = 0, bestFitHeight = 0; float desiredAspectRatio = (float)_width / (float)_height; hr = pStreamConfig->GetNumberOfCapabilities(&streamCapsCount, &capsSize); if (FAILED(hr)) goto ReleaseDataAndFail; videoCaps = (BYTE *)malloc(capsSize * streamCapsCount); mediaTypeArray = (AM_MEDIA_TYPE **)malloc(sizeof(AM_MEDIA_TYPE *) * streamCapsCount); for (int i = 0; i < streamCapsCount; i++) { hr = pStreamConfig->GetStreamCaps(i, &mediaTypeArray[i], videoCaps + capsSize * i); if (FAILED(hr)) continue; VIDEO_STREAM_CONFIG_CAPS *currentVideoCaps = (VIDEO_STREAM_CONFIG_CAPS *)(videoCaps + capsSize * i); int closestWidth = MAX(currentVideoCaps-&gt;MinOutputSize.cx, MIN(currentVideoCaps-&gt;MaxOutputSize.cx, width)); int closestHeight = MAX(currentVideoCaps-&gt;MinOutputSize.cy, MIN(currentVideoCaps-&gt;MaxOutputSize.cy, height)); int pixelDiff = ABS(desiredPixelCount - closestWidth * closestHeight); if (pixelDiff &lt; bestFitPixelDiff &amp;&amp; ABS(desiredAspectRatio - (float)closestWidth / (float)closestHeight) &lt; 0.1f) { bestFit = i; bestFitPixelDiff = pixelDiff; bestFitWidth = closestWidth; bestFitHeight = closestHeight; } } if (bestFit == -1) goto ReleaseDataAndFail; AM_MEDIA_TYPE *mediaType; hr = pStreamConfig->GetFormat(&mediaType); if (FAILED(hr)) goto ReleaseDataAndFail; VIDEOINFOHEADER *videoInfoHeader = (VIDEOINFOHEADER *)mediaType->pbFormat; videoInfoHeader->bmiHeader.biWidth = bestFitWidth; videoInfoHeader->bmiHeader.biHeight = bestFitHeight; //mediaType->subtype = MEDIASUBTYPE_RGB32; hr = pStreamConfig->SetFormat(mediaType); if (FAILED(hr)) goto ReleaseDataAndFail; pStreamConfig->Release(); pStreamConfig = NULL; free(videoCaps); videoCaps = NULL; free(mediaTypeArray); mediaTypeArray = NULL; // Connect pins IPin *pDeviceOut = NULL, *pGrabberIn = NULL; if (FindPin(pDeviceFilter, PINDIR_OUTPUT, 0, &pDeviceOut) && FindPin(pGrabberF, PINDIR_INPUT, 0, &pGrabberIn)) { hr = pGraphBuilder->Connect(pDeviceOut, pGrabberIn); if (FAILED(hr)) goto ReleaseDataAndFail; } else { goto ReleaseDataAndFail; } // start playing hr = pMediaControl->Run(); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGrabber->GetConnectedMediaType(&mt); // Set dimensions width = bestFitWidth; height = bestFitHeight; _width = bestFitWidth; _height = bestFitHeight; // Allocate pixel buffer pPixelBuffer = (unsigned *)malloc(width * height * 4); // Release objects pGraphBuilder->Release(); pGraphBuilder = NULL; pEnumMoniker->Release(); pEnumMoniker = NULL; pCreateDevEnum->Release(); pCreateDevEnum = NULL; return true;

    Read the article

  • How and when is something considered industry standard?

    - by Sonny Boy
    Hey all, I'm currently working on a proposal for my organization which includes a shift from waterfall development methodology over to a Scrum framework. As I work for a university, citations for all of my work is extremely important. As I was looking to add a citation for my statement of Agile being the industry standard, I kind of hit a wall. Who is it that decides when something become industry standard and how is that decision made?

    Read the article

  • Why does calling the YUI Datatable showCellEditor not display the editor?

    - by t-boy
    Clicking on the second cell (any row) in the datatable causes the cell editor to display. But, I am trying to display the cell editor from code. The code looks like the following: var firstEl = oDataTable.getFirstTdEl(rowIndex); var secondCell = oDataTable.getNextTdEl(firstEl); oDataTable.showCellEditor(secondCell); When I debug into the datatable.js code (either with a click or from the code above) it follows the same path through the showCellEditor function but the above code will not display the editor. I am using YUI version 2.8.0r4.

    Read the article

  • Using PHP SoapClient with Java JAX-WS RI (Webservice)

    - by Kau-Boy
    For a new project, we want to build a web service in JAVA using JAX-WS RI and for the web service client, we want to use PHP. In a small tutorial about JAX-WS RI I found this example web service: package webservice; import javax.jws.WebService; import javax.jws.soap.SOAPBinding; import javax.jws.soap.SOAPBinding.Style; @WebService @SOAPBinding(style = Style.RPC) public class Calculator { public long addValues(int val1, int val2) { return val1 + val2; } } and for the web server: package webservice; import javax.xml.ws.Endpoint; import webservice.Calculator; public class CalculatorServer { public static void main(String args[]) { Calculator server = new Calculator(); Endpoint endpoint = Endpoint.publish("http://localhost:8080/calculator", server); } } Starting the Server and browsing the WDSL with the URL "http://localhost:8080/calculator?wsdl" works perfectly. But calling the web service from PHP fails My very simple PHP call looks like this: $client = new SoapClient('http://localhost:8080/calculator?wsdl', array('trace' => 1)); echo 'Sum: '.$client->addValues(4, 5); But than I either get a "Fatal error: Maximum execution time of 60 seconds exceeded..." or a "Uncaught SoapFault exception: [WSDL] SOAP-ERROR: Parsing WSDL: Couldn't load from 'http://localhost:8080/calculator?wsdl' ..." exception. I have tested the PHP SoapClient() with other web services and they work without any issues. Is there a known issue with JAX-WS RI in comibation with PHP, or is there an error in my web service I didn't see? I have found this bug report, but even updating to PHP 5.3.2 doesn't solved the problem. Can anyone tell me what to do? And by the way, my java version running on Windows 7 x64 is the following: java version "1.6.0_17" Java(TM) SE Runtime Environment (build 1.6.0_17-b04) Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01, mixed mode)

    Read the article

  • Static web project in Visual Web Developer Express

    - by Charlie boy
    I am about to develop a sort of web application using only static files (eg. html, js & css). Is there a way to start this sort of project in Visual Web Developer Express? I want to have all the niceties with intellisense, sulution explorer and whatnot but I don't want all of the ASP.net structure in the sulution. Is thiss possible or is there perhaps another IDE for this kind of project? Thanks!

    Read the article

  • initializing structs using user-input information

    - by johnny boy
    I am trying to make a program that works with poker (texas holdem) starting hands; each hand has a value from 1 to 169, and i want to be able to input each card and whether they are suited or not, and have those values correspond to a series of structs. Here is the code so far, i cant seem to get it to work (im a beginning programmer). oh and im using visual studio 2005 by the way #include "stdafx.h" #include <iostream> int main() { using namespace std; struct FirstCard { struct SecondCard { int s; //suited int n; //non-suited }; SecondCard s14; SecondCard s13; SecondCard s12; SecondCard s11; SecondCard s10; SecondCard s9; SecondCard s8; SecondCard s7; SecondCard s6; SecondCard s5; SecondCard s4; SecondCard s3; SecondCard s2; }; FirstCard s14; //ace FirstCard s13; //king FirstCard s12; //queen FirstCard s11; //jack FirstCard s10; FirstCard s9; FirstCard s8; FirstCard s7; FirstCard s6; FirstCard s5; FirstCard s4; FirstCard s3; FirstCard s2; s14.s14.n = 169; // these are the values that each combination s13.s13.n = 168; // will evaluate to, would eventually have s12.s12.n = 167; // hand combinations all the way down to 1 s11.s11.n = 166; s14.s13.s = 165; s14.s13.s = 164; s10.s10.n = 163; //10, 10, nonsuited s14.s13.n = 162; s14.s11.s = 161; s13.s12.s = 160;// king, queen, suited s9.s9.n = 159; s14.s10.s = 158; s14.s12.n = 157; s13.s11.s = 156; s8.s8.n = 155; s12.s11.s = 154; s13.s10.s = 153; s14.s9.s = 152; s14.s11.n = 151; cout << "enter first card: " << endl; cin >> somthing?//no idea what to put here, but this would somehow //read out the user input (a number from 2 to 14) //and assign it to the corresponding struct cout << firstcard.secondcard.suited_or_not << endl; //this would change depending //on what the user inputs system("Pause"); }

    Read the article

  • Best Practice for Utilities Class?

    - by Sonny Boy
    Hey all, We currently have a utilities class that handles a lot of string formatting, date displays, and similar functionality and it's a shared/static class. Is this the "correct" way of doing things or should we be instanciating the utility class as and when we need it? Our main goal here is to reduce memory footprint but performance of the application is also a consideration. Thanks, Matt PS. We're using .NET 2.0

    Read the article

  • How to create a HTML5 + SVG document using the PHP XSLTProcessor

    - by Kau-Boy
    For a little project about XML I try to use HTML5 as it has SVG and WAI-ARIA Support. I also want to use a XSL stylesheet for my document. But I can't get a valid HTML5 document with a nested SVG. Here are some version I tested so far: <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output indent="yes" method="xml"/> <xsl:template match="/"> <html xmlns="http://www.w3.org/1999/xhtml"> // content with the svg tag in the body </html> </xsl:template> </xsl:stylesheet> In combination with header('Content-Type: application/xml'); it works and produces this HTML output: <?xml version="1.0"?> <html xmlns="http://www.w3.org/1999/xhtml"> // content with the svg tag in the body </html> But it is not HTML5 and without a DOCTYPE I get a lot of errors on the W3 validator. So trying to get a HTML5 document I used the following XSL: <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output indent="yes" method="html"/> <xsl:template match="/"> <xsl:text disable-output-escaping='yes'>&lt;!DOCTYPE HTML></xsl:text> <html> // content with the svg tag in the body </html> </xsl:template> </xsl:stylesheet> But unfortunately that will produce thze following HTML output: <!DOCTYPE HTML> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> .... </head> // content with the svg tag in the body </html> As you can see it's regular HTML5 but using it in combination with header('Content-Type: application/xml'); it fails because of the missing slash at the end of the meta tag (which was automatically created). Using header('Content-Type: image/xhtml+svg'); or header('Content-Type: text/html'); there is no XML parsing error, but the page will not show the SVG as a graph but as text (without the tags). Can anyone tell me how to avoid the meta tag to be inserted or how to set a propper Content-Type that will make the browser rendern the SVG. Or even any other hint to get this working. I would really like to keep HTML5 to be able to keep the WAI-ARIA Landmark Roles an the HTML5 tags like NAV and FOOTER.

    Read the article

  • Winforms panel event after scroll

    - by Charlie boy
    Hello I have a panel in wich I do a bounch af rater complex drawing in the paint event. Since the drawing-code is kind of heavy, it gets rather twitchy when I scroll the panel, since the paint event is raised in such short intervals. My question is really this; Can i capture evnts such as "on scroll start" and "on scroll end" on a winforms control? If so, I could then just pause the drawing-code until the scroll is complete. Thanks in advance!

    Read the article

  • Facebook Connect for iOS: dialogDidComplete response differentiation

    - by Oh Danny Boy
    I was wondering how to differentiate between the user tapping submit or skip in the inline post-to-stream FBDialog. Anyone know what to test for? I am using the latest iOS Facebook Connect in a iOS 4.2 environment. /** * Called when a UIServer Dialog successfully return. */ - (void)dialogDidComplete:(FBDialog *)dialog { if user tapped submit and post was successful alert user of successful post if user tapped "skip" (cancel equivalent) do not display alert }

    Read the article

  • iOS MapKit: Selected MKAnnotation coordinates.

    - by Oh Danny Boy
    Using the code at the following tutorial, http://www.zenbrains.com/blog/en/2010/05/detectar-cuando-se-selecciona-una-anotacion-mkannotation-en-mapa-mkmapview/, I was able to add an observer to each MKAnnotation and receive a notification of selected/deselected states. I am attempting to add a UIView on top of the selection annotation to display relevant information about the location. This information cannot be conveyed in the 2 lines allowed (Title/Subtitle) for the pin's callout. - (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context { Annotation *a = (Annotation *)object; // Alternatively attempted using: //Annotation *a = (Annotation *)[mapView.selectedAnnotations objectAtIndex:0]; NSString *action = (NSString *)context; if ([action isEqualToString:ANNOTATION_SELECTED_DESELECTED]) { BOOL annotationSelected = [[change valueForKey:@"new"] boolValue]; if (annotationSelected) { // Actions when annotation selected CGPoint origin = a.frame.origin; NSLog(@"origin (%f, %f) ", origin.x, origin.y); // Test UIView *v = [[UIView alloc] init]; [v setBackgroundColor:[UIColor orangeColor]]; [v setFrame:CGRectMake(origin.x, origin.y , 300, 300)]; [self.view addSubview:v]; [v release]; }else { // Accions when annotation deselected } } } Results using Annotation *a = (Annotation *)object origin (154373.000000, 197135.000000) origin (154394.000000, 197152.000000) origin (154445.000000, 197011.000000) Results using Annotation *a = (Annotation *)[mapView.selectedAnnotations objectAtIndex:0]; origin (0.000000, 0.000000) origin (0.000000, 0.000000) origin (0.000000, 0.000000) The numbers are large. They are not relative to the view (1024 x 768). I believe they are relative to the entire map. How would I be able to detect the exact coordinates relative to the entire view so that I can appropriately position my view?

    Read the article

  • WPF - Centering a checkbox in a GridViewColumn?

    - by Sonny Boy
    Hey all, I'm currently struggling on getting my checkboxes to property center within my GridViewColumns. I've defined a style for my checkboxes like so: <Style TargetType="{x:Type CheckBox}" x:Key="DataGridCheckBox"> <Setter Property="HorizontalAlignment" Value="Center" /> <Setter Property="HorizontalContentAlignment" Value="Center" /> <Setter Property="IsEnabled" Value="False" /> <Setter Property="Margin" Value="4" /> <Setter Property="VerticalAlignment" Value="Center" /> <Setter Property="VerticalContentAlignment" Value="Center" /> <Setter Property="Width" Value="{Binding RelativeSource={RelativeSource FindAncestor,AncestorType={x:Type GridViewColumn}},Path=ActualWidth}" /> </Style> And my checkboxes are added into the GridViewColumn using a DataTemplate like this: <GridViewColumn Header="Comment"> <GridViewColumn.CellTemplate> <DataTemplate> <CheckBox Style="{StaticResource DataGridCheckBox}" IsChecked="{Binding PropertyItem.Comment, Converter={StaticResource booleanConverter}, ConverterParameter='string'}"/> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> But the problem I have is that the checkboxes remain left-aligned (even when resizing the column). Any ideas? Thanks in advance, Sonny

    Read the article

  • Which DOCTYPE should I use for HTML newsletters?

    - by Kau-Boy
    We are going the send our newsletters in HTML format soon. I have found a lot of information (like on Litmus) about which e-mail program and web mailer understands which CSS property. But the only think I couldn't figure out is which DOCTYPE we should use. Our mass mailing tool always overwrites the DOCTYPE with HTML 4.0 Transitional: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> What would you say we should take to be compatible with most of the e-mail programs and web mailer? We don't use a lot of HTML and now special new CSS properties.

    Read the article

  • How to create Chat application using Servlets & JSP

    - by Crazy boy
    I want to create chat application using Servlets & JSP. May I know how can I create chat application as I have never created before? How much knowledge I need to have to create chat application? Is there any need of networking API to create chat application? What's the design pattern I need to follow to create that application? Is there any need of database?

    Read the article

  • Firefox api - access from my program

    - by del-boy
    Is it possible to access Firefox info from my program? Specificly I need to read URL of opened site in active tab. Is something like this possible? I guess I can write extension that will allow me to do something like this, but I wanted to know if it is posible with some FF api...

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >