Search Results

Search found 2816 results on 113 pages for 'dell boy'.

Page 44/113 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

  • An increase to 3 Gig of RAM slows down Ubuntu 10.04 LTS

    - by williepabon
    I have Ubuntu 10.04 running from an external hard drive (installed on an enclosure) connected via USB port. Like a month or so ago, I increased RAM on my pc from 2 Gigs to 3 Gigs. This resulted on extremely long boot times and slow application loads. While I was understanding the nature of my problem, I posted various threads on this forum ( Questions # 188417, 188801), where I was advised to gather speed tests, and other info on my machine. I was also suggested that I might have problems with the RAM installed. Initially, I did not consider that possibility because: 1) I did a memory test with a diagnostic program from DELL (My pc is from Dell) 2) My pc works fine with Windows XP (the default OS), no problems with memory 3) My pc works fine when booting with Ubuntu 10.10 memory stick, no speed problems 4) My pc works fine when booting with Ubuntu 11.10 memory stick, no speed problems Anyway, I performed the memory tests suggested. But before doing it, and to check out any possibility of hardware issues on the hard drive, I did the following: (1) purchased a new hard drive enclosure and moved my hard drive to it, (2) purchased a new USB cable and used it to connect my hard drive/enclosure setup to a different USB port on my pc. Then, I performed speed tests with 1 Gig, 2 Gigs and 3 Gigs of RAM with my Ubuntu 10.04 OS. Ubuntu 10.04 worked well when booted with 1 Gig or 2 Gigs of RAM. When I increased to 3 Gigs, it slowed down to a crawl. I can't understand the relationship between an increase of 1 Gig and the effect it has in Ubuntu 10.04. This doesn't happen with Ubuntu 10.10 and 11.10. Unfortunately for me, Ubuntu 10.04 is my principal work operating system. So, I need a solution for this. Hardware and system information: DELL Precision 670 2 internal SATA Hard drives Audigy 2 ZS audio system Factory OS: Windows XP Professional SP3 NVidia 8400 GTS video card More info: williepabon@WP-WrkStation:~$ uname -a Linux WP-WrkStation 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04 UTC 2012 i686 GNU/Linux williepabon@WP-WrkStation:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 10.04.4 LTS Release: 10.04 Codename: lucid Speed test with the 3 Gigs of RAM installed: williepabon@WP-WrkStation:~$ sudo hdparm -tT /dev/sdc [sudo] password for williepabon: /dev/sdc: Timing cached reads: 84 MB in 2.00 seconds = 41.96 MB/sec Timing buffered disk reads: 4 MB in 3.81 seconds = 1.05 MB/sec This is a very slow transfer rate from a hard drive. I will really appreciate a solution or a work around for this problem. I know that that there are users that have Ubuntu 10.04 with 3 Gigs or more of RAM and they don't have this problem. Same question asked on Launchpad for reference.

    Read the article

  • Poor home office network performance and cannot figure out where the issue is

    - by Jeff Willener
    This is the most bizarre issue. I have worked with small to mid size networks for quite a long time and can say I'm comfortable connecting hardware. Where you will start to lose me is with managed switches and firewalls. To start, let me describe my network (sigh, shouldn't but I MUST solve this). 1) Comcast Cable Internet 2) Motorola SURFboard eXtreme Cable Modem. a) Model: SB6120 b) DOCSIS 3.0 and 2.0 support c) IPv4 and IPv6 support 3-A) Cisco Small Business RV220W Wireless N Firewall a) Latest firmware b) Model: RV220W-A-K9-NA c) WAN Port to Modem (2) d) vlan 1: work e) vlan 2: everything else. 3-B) D-Link DIR-615 Draft 802.11 N Wireless Router a) Latest firmware b) WAN Port to Modem (2) 4) Servers connected directly to firewall a) If firewall 3-A, then vlan 1 b) CAT5e patch cables c) Dell PowerEdge 1400SC w/ 10/100 integrated NIC (Domain Controller, DNS, former DHCP) d) Dell PowerEdge 400SC w/ 10/100/1000 integrated NIC (VMWare Server) 4) Linksys EZXS88W unmanaged Workgroup 10/100 Switch a) If firewall 3-A, then vlan 2 b) 25' CAT5e patch cable to firewall (3-A or 3-B) c) Connects xBox 360, Blu-Ray player, PC at TV 5) Office equipment connected directly to firewall a) If firewall 3-A, then vlan 1 b) ~80' CAT6 or CAT5e patch cable to firewall (3-A or 3-B) c) Connects 1) Dell Latitude laptop 10/100/1000 2) Dell Inspiron laptop 10/100 3) Dell Workstation 10/100/1000 (Pristine host, VMWare Workstation 7.x with many bridged VM's) 4) Brother Laser Printer 10/100 5) Epson All-In-One Workforce 310 10/100 5-A) NetGear FS116 unmanaged 10/100 switch a) I've had this switch for a long time and never had issues. 5-B) NetGear GS108 unmanaged 10/100/1000 switch a) Bought new for this issue and returned. 5-C) Linksys SE2500 unmanaged 10/100/1000 switch a) Bought new for this issue and returned. 5-D) TP-Link TL-SG10008D unmanaged 10/100/1000 a) Bought new for this issue and still have. 6) VLan 1 Wireless Connections (on same subnet if 3-B) a) Any of those at 5c b) HP Laptop 7) VLan 2 Wireless Connection (on same subnet if 3-B) a) IPad, IPod b) Compaq Laptop c) Epson Wireless Printer Shew, without hosting a diagram I hope that paints a good picture. The Issue The breakdown here is at item 5. No matter what I do I cannot have a switch at 5 and have to run everything wireless regardless of router. Issues related to using a switch (point 5 above) SpeedTest is good. Poor throughput to other devices if can communicate at all. Usually cannot ping other devices even on the same switch although, when able, ping times are good. Eventual lose of connectivity and can "sometimes" be restored by unplugging everything for several days, not minutes or hours but we're talking a week if at all. Directly connect to computer gives good internet connection however throughput to other devices connected to firewall is at best horrible. Yet printing doesn't seem to be an issue as long as they are connected via wireless. I have to force the RV220W to 1000Mb on the respective port if using a Gig Switch Issues related to using wireless in place of a switch (point 5 above) Poor throughput to other devices if can communicate. SpeedTest is good. Bottom line Internet speeds are awesome. By the way, Comcast went WAY above and beyond to make sure it was not them. They rewired EVERYTHING which did solve internet drops. Computer to computer connections are garbage Cannot get switch at 5 to work, yet other at 4 has never had an issue. Direct connection, bypass switch, is good for DHCP and internet. DNS must be on server, not firewall. Cisco insists its my switches but as you can see I have used four and two different cables with the same result. My gut feeling is something is happening with routing. But I'm not smart enough to know that answer. I run a lot of VM's at 5-c-3, could that cause it? What's different compared to my previous house is I have introduced Gigabit hardware (firewall/switches/computers). Some of my computers might have IPv6 turned on if I haven't turned it off already. I'm truly at a loss and hope anyone has some crazy idea how to solve this. Bottom line, I need a switch in my office behind the firewall. I've changed everything. The real crux is I will find a working solution and, again, after days it will stop working. So this means I cannot isolate if its a computer since I have to use them. Oh and a solution is not throwing more money at this. I'm well into $1k already. Yah, lame.

    Read the article

  • Laptop battery fails to change unless power level very low, and then dicharges quickly

    - by dana
    I've had my laptop for about 5-6 weeks. Its a DELL Alienware M15x and I have never replaced the battery,such as http://www.pcbatteria.com/dell-alienware-m15x-series.html. The past 3 weeks or so the battery can only charge when the computer is off or in a low power state. If its on and plugged in it will still lose its charge unless its already at 100%. On a full charge without being plugged in it only holds its charge for about 1 hour on "power saver". This makes it extremely hard to use it as a portable device so i'm trying to find a way to troubleshoot the problem without having to buy a new battery or laptop. Unfortunately I need it for the next few months in some of my classes so its kind of urgent. Thanks for your help!

    Read the article

  • How well do laptops with Nvidia Optimus work?

    - by DSJones
    I am considering buying a Dell XPS 15 laptop. The laptop has a nvidia 420m card which should work with linux but I keep reading about the Nvidia optimus technology that isn't supported on Linux. I am not really interested in switching from Nvidia to intel to save power but need to know that the Nvidia card will infact work if i installed Ubuntu. If anyone has experience usung a nvidia card with optimus technology or even better the exact laptop in question (Dell XPS 15 with 1GB NVIDIA® GeForce® GT 420M) it would be great. A major problem holding people back from adopting Linux is this sort of hardware issue. I am a long term Ubuntu user and supporter who can't afford to make a mistake with a purchase like this. I don't want to spend £500+ to find I have no graphics acceleration because Windows7 is not an option.

    Read the article

  • Installation of 11.10 on new drive (no OS)

    - by Jeffrey Vincent
    I have a Dell Dimension 600 XPS Phoenix BIOS version A03, the original HD crashed and burned. Dell didn't send OS disks (was on the original drive and no back up disks), so I am trying to install Ubuntu 11.10 on the new drive. The new drive is a Western Digital 1TB. I formatted the new drive by putting it in an enclosure and formatting it with Windows 7 on my HP system. When I put the cd in the cdrom it boots to the cd with the Advanced user screen (won't boot into the usually Windows GUI). When I try to install (or run from live Cd) I get the same error message. Same with trying the various boot options. The message is: VFS: cannot open root device "(NULL)" or unknown-block(8,1) Please append a correct "root=" boot option: Here are the available partitions: Kernal Panic- not syncing: VFS: Unable to mount rootfs on unknown-block(8,1) and then it lists Trace messages then freezing. Any help or suggestions are appreciated in advance.

    Read the article

  • Broadcom BCM4313 wireless slow and high-latency

    - by Florin Andrei
    Ubuntu 12.10 64 bit on a Dell Latitude E6330 laptop. Wireless is pretty slow. It gets connected quick enough, but then it acts like a dialup connection. My ssh sessions over WiFi are slow and laggy. Even browsing is slow, the pages are loading like it's 1998. This does not depend on the access point, it's the same both at home and at work. Other systems work fine on these access points. I had an older Dell laptop before, different WiFi hardware, and it was much faster over the same wireless access points. Is this a known issue with this hardware? If so, any solutions?

    Read the article

  • GPU hung when switching graphic card

    - by Lie Ryan
    I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

    Read the article

  • Wireless Broadcom 4313 not working on Ubuntu 12.04

    - by user88568
    It seems a lot of people are having this problem, but none of the posted solutions have worked for me so far. My driver is installed and activated, I have tried removing and re-adding the network, and various other fixes. No networks were picked up on my first boot, the next day wireless worked fine, and since then it does not detect networks, and when I manually try to connect, it repeatedly asks for the password and does not connect. Here's my info: 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-a1-ff-ff-f3-70-f1 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac root@michelle-laptop:/home/michelle# ifconfig eth0 Link encap:Ethernet HWaddr 70:f1:a1:f3:ba:ab inet6 addr: fe80::72f1:a1ff:fef3:baab/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:29 TX packets:0 errors:30 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 eth1 Link encap:Ethernet HWaddr f0:4d:a2:53:83:7a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:104 errors:0 dropped:0 overruns:0 frame:0 TX packets:104 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8000 (8.0 KB) TX bytes:8000 (8.0 KB) root@michelle-laptop:/home/michelle# lsmod Module Size Used by dm_crypt 22528 0 snd_hda_codec_hdmi 31775 1 snd_hda_codec_realtek 174313 1 snd_hda_intel 32765 5 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 lib80211_crypt_tkip 17275 0 bnep 17830 2 rfcomm 38139 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq joydev 17393 0 wl 2646601 0 snd 62064 19 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd btusb 17912 0 bluetooth 158438 11 bnep,rfcomm,btusb uvcvideo 67203 0 videodev 86588 1 uvcvideo snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lib80211 14040 2 lib80211_crypt_tkip,wl intel_ips 17822 0 psmouse 72919 0 serio_raw 13027 0 mei 36570 0 dell_laptop 17767 0 dell_wmi 12601 0 dcdbas 14098 1 dell_laptop sparse_keymap 13658 1 dell_wmi mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid wmi 18744 1 dell_wmi i915 414817 3 atl1c 36718 0 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 root@michelle-laptop:/home/michelle# iwlist scan lo Interface doesn't support scanning. eth1 Interface doesn't support scanning. eth0 No scan results root@michelle-laptop:/home/michelle# rfkill list 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no Obviously I don't know what I'm doing. I'd appreciate any help! Thanks!

    Read the article

  • Sound plays from laptop speakers only even when headphones are connected

    - by Ankush N Nayak
    I'm using a Dell Vostro 1014 laptop with Ubuntu 11.10. From the time I had Ubuntu 9.04, sound comes from the laptop speakers only even when I plug in earphones or external speakers. Also, if an external microphone plugged in, it does not work. Dell even replaced my motherboard to check for hardware issues but the problem persists. So it is definitely not a hardware issue. The sound plays perfectly through the headphones in the pre-boot diagnostics. So I figure, this must be a problem with Ubuntu not recognizing my sound card. Please try to give a solution for this problem.

    Read the article

  • Blank Screen After Ubuntu 12 installation

    - by Atul
    On my dell laptop, running with windows 7, I installed Ubuntu 12. I used it for sometime, then i re-started to switch to windows. First time it got boot up with windows but then it got hanged. I re-started again and then blank screen with blinking cursor came and beep sounds also started to came. I read in few forums and this seems like a common issue with Ubuntu. I tried using the bootable USB for both windows 7 and Ubuntu but none of these are even getting detected. Please let me know if any of know the work-around. Below is configuration" Machine: Dell Studio BIOS: Phoenix OS: Windows 7 Motherboard: Intel

    Read the article

  • Unable to install Ubuntu 12.10 on windows 8 machine/ error no5

    - by JOBIN VARGHESE
    installing crashes at halfway of 'copying files' showing an i\o device error error no5; there was problem in beginning of installation too, ubuntu was not detecting the installed windows 8. my system is a dell inspiron 5520 laptop ,with 1 tb WDC hard disk in GPT ,with EFI . my current partition is like 102 mb EFI SYSTEM partition 200 gb Windows 8 ntfs 22 gb root Ext4 8 gb swap 20 db home Ext4 680 gb ntfs Drive for storing all my files. i tried both dvd disc and usb drive, both resulted in same error. inbuild dell hardware diagnosis utility showed both hard disk and dvd drive as healthy what may be the reason and how can i install ubuntu along side my windows 8?

    Read the article

  • Ubuntu 12.04, can't find my home wifi network

    - by Anton
    I've tried several solutions I found on the web, but didn't manage to solve a problem. Since today my laptop won't find my WiFi network, but neighbours' networks are suggested. Another laptop with U12.04 does find one. What do I do? I've Dell Latitude-E4310, 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f2c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac also NetworkManager Tool State: connected (global) - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: wl State: disconnected Default: no HW Address: 1C:65:9D:7A:45:5C Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Should I provide anything else? Many thanks in advance.

    Read the article

  • What makes games responsive to user input?

    - by zaftcoAgeiha
    Many games have been praised for its responsive gameplay, where each user action input correspond to a quick and precise character movement (eg: super meat boy, shank...) What makes those games responsive? and what prevents other games from achieving the same? How much of it is due to the game framework used to queue mouse/keyboard events and render/update the game and how much is attributed to better coding?

    Read the article

  • Unable to connect to wireless network

    - by Mike
    A real newbie here. Just downloaded Ubuntu 12.10, put on USB stick and have booted it on my other PC after modifying the boot sequence to boot from USB before hard drive where Windows XP lives. Have no problems with Windows and my wireless but not with Ubuntu. The PC is a Dell Latitude D630 laptop. According to Windows XP , the wireless card is a Dell Wireless 1490 Dual Band WLAN Mini-Card, my IP address is 192.168.0.193, subnet mask is 255.255.255.0, assigned by DHCP, SSID is HOME , type 802.11 and default gateway is 192.168.0.1. Ok, back to booting from USB and TRY option, I am Editing Network connections, I have created/configured "Wireless connection 1" with SSID of HOME and the only other thing I have changed is on the "Editing IPV4 routes for Wireless connection 1 I have enterred 192.168.0.193 , netmask 255.255.255.0 and gateway 192.168.0.1 Anyways , no go. Could use some help. Thanks, Mike from Montreal

    Read the article

  • What are some good game development programs for kids?

    - by John Giotta
    I know a very bright little boy who excels in math, but at home he's glued to his Nintendo DS. When I asked him what he wanted to do when he grew up he said "Make video games!" I remember a few years there was mention of a MIT software called Scratch and thought maybe this kid can do want he wants to do. Has anyone used any of the "game development" for kids softwares out there? Can you recommend any?

    Read the article

  • Microsoft propose le Lumia 800 à 1Euro pour l'achat de Visual Studio et des réductions sur MSDN pour les utilisateurs de son EDI

    Microsoft propose le Lumia 800 à 1€ pour l'achat de Visual Studio Et des réductions sur MSDN pour les utilisateurs de son EDI Alors que des augmentations viennent d'être annoncées sur les licences de Visual Studio, Microsoft lance des offres intéressantes à saisir rapidement. Pour tout achat de Visual Studio, le Nokia Lumia 800 (objectivement un très bon smarthpone sous l'OS mobile de Microsoft) pourra en effet être ajouté à la commande pour 1 €. Le prix nu de l'appareil est autour des 450 €. Un projecteur Ultramobile de Dell peut remplacer le Lumia aux mêmes conditions. Sur cette offre, Dell rajoute pour sa part un coupon de réduction de 35 % ...

    Read the article

  • Ubuntu 12.04 nVidia TwinView tearing

    - by Andy Turfer
    I'm running Ubuntu 12.04. Today I just purchased a second monitor (I have a Dell U2711 and a 42-inch Sony TV). I'm running the 295.49 proprietary nVidia graphics driver, my graphics card is a GeForce GTX 460. I am not able to activate "xinerama" with "separate X screens", not sure why. I am able to use TwinView. This works, although it results in severe tearing on the Sony TV. It's as though "sync to vblank" isn't working (I have this set in Compiz and in the nVidia settings). If I disable the Dell U2711 and only use the Sony, everything works fine, zero tearing. Is it the case that "sync to vblank" can only work on a single monitor in Ubuntu 12.04? Is there any way to get rid of the tearing on the second monitor in TwinView mode?

    Read the article

  • DVC101 Video Capture Device on USB hub - Ubuntu Server 12.04

    - by John
    I have a Dell Inspiron 8600 laptop I use as a media server/video capture system. It only has 2 USB ports and I have a total of 3 devices I need to connect. The DVC101 works perfectly while plugged directly into the USB port in back of the laptop. Unfortunately it does not get recognized when plugged into a passive or powered USB hub. Questions: Is there something I am missing on the Ubuntu side? Something I need to do that will allow the device to be recognized through the hub? If not, will the extra USB ports on a dell laptop dock (port replicator) act the same as the aftermarket hubs? I know this one is off topic of Ubuntu but any input appreciated.

    Read the article

  • 525 m nvidia grapic card is not work in Linux

    - by mayank khandelwal
    i have dell dell inspiron 15r and company give the windows 7 64 bit os. i have 1GB 525m nvidia graphic card which work in windows very well but when i install the ubuntu 10.10 then graphic card is not work. ubuntu 10.10 give that message that i have nvidia graphic card which not active you want to active. when i say ok then its download driver from the net and then install it when restart computer then graphic terminal is not working other terminal is work well. i have not idea why that happen plz help me ?

    Read the article

  • Who makes laptops for Ubuntu?

    - by Tim Lytle
    I'm looking for a laptop and would like to avoid the whole 'is this [specific configuration of hardware] compatible with Ubuntu?' process by finding a laptop manufactured with Ubuntu in mind. I know of system76, but are there any other manufacturers making laptops built to run a standard build of Ubuntu? I'm not counting Dell, as - from my experience - their 'Ubuntu' laptops/netbooks require their build, and because of that have their own set of compatibility issues. UPDATE: And as mentioned in the comments, Dell is no longer selling systems with Ubuntu to consumers.

    Read the article

  • Who makes laptops for Ubuntu?

    - by Tim Lytle
    I'm looking for a laptop and would like to avoid the whole 'is this [specific configuration of hardware] compatible with Ubuntu?' process by finding a laptop manufactured with Ubuntu in mind. I know of system76, but are there any other manufacturers making laptops built to run a standard build of Ubuntu? I'm not counting Dell, as - from my experience - their 'Ubuntu' laptops/netbooks require their build, and because of that have their own set of compatibility issues. UPDATE: And as mentioned in the comments, Dell is no longer selling systems with Ubuntu to consumers.

    Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >