Search Results

Search found 5907 results on 237 pages for 'dist upgrade'.

Page 41/237 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • Ubuntu hangs on booting up after a update

    - by alFReD NSH
    I've made a clean install yesterday, for the first time restarted, everything went good and then after I updated packages and copied my old home directory to replace the new one, when I restarted it hung when it was booting. I tried reinstalling again and doing the same thing, but again same thing happened. Here's what I see, before when the Ubuntu logo with the five dots is shown: Then after that, 3 or 4 of the dots will load and hangs there. If I press arrow up before that, this will be shown I started my laptop again today(the pictures are for the day before) and after that, boot up with live CD and got the logs. dmesg: http://pastebin.com/aVxV7BQF syslog: http://pastebin.com/4E2BrRUK And some info: alfred@alFitop:~$ uname -a Linux alFitop 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: http://pastebin.com/AZbKJmsT sources.list : http://pastebin.com/2HazmuyV My problem is a bit similar to here: http://ubuntuforums.org/showthread.php?t=1918271 Though I didn't change my x.org config. Only changed home directory and updated packages. I've tried memtest and fschk, both passed. In the recovery mode boot option, I've also realized that same things happen in failsafe graphical mode. But when I go into the network mode, I can boot up my system, but of course same the graphics are just basic. Adding blacklist intel_ips to /etc/modprobe.d/blacklist.conf solves the first message, but still I get the broken pipe and CPU stack traces. The current kernel version is 3.2.0-25, I've tried booting up in the 3.2.0-23(the one the installer came with, but same results.) Also uninstalled apparmor, didn't help. I've installed Ubuntu again, this time without copying the home directory, also same result. --- UPDATE --- This problem was solved before with removing backports, but its back again! I've updated my laptop last night and the problem came back. It's definitely one of these packages. My /var/log/apt/term.log and /var/log/apt/history.log. I'm almost having the same situation. --- UPDATE --- I realized this also have happened on times that I have updated(haven't restarted after it) and my computer power has been cut off and its shutdown due to lack of power. And I realized if I just do as I answered but not in somewhere without GUI(networking mode has the GUI) it wouldn't work.

    Read the article

  • How do I apt-get -y dist-upgrade without a grub config prompt?

    - by fratrik
    Per Make apt-get (or aptitude) run with -y but not prompt for replacement of configuration files? I did the following: ec2run ami-3c994355 --region us-east-1 -n 1 -t m1.large -z us-east-1d On the machine: sudo apt-get update sudo apt-get -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" dist-upgrade I still get a prompt asking me which config file I want to use. These are the lines that come before the prompt: Setting up grub-pc (1.99-21ubuntu3.1) ... then: +-------------------------------------------------------¦ Configuring grub-pc +-------------------------------------------------------+ ¦ A new version of configuration file /etc/default/grub is available, but the version installed currently has been locally modified. ¦ ¦ ¦ ¦ What do you want to do about modified configuration file grub? ¦ ¦ ¦ ¦ install the package maintainer's version ¦ (Unrelated, was this too much information?)

    Read the article

  • How do I shutdown 12.10 when ACPI is set to OFF?

    - by rahi
    I recently installed 12.04 on an HP Spectre XT ultrabook. I installed 12.04 from a USB. When the install was complete, and the computer restarted, I got a blank screen. After some searching, I found that I had to choose "acpi=off" during the installation, which now shows up in the grub screen. Once I was on 12.04, I upgraded to 12.10. The issue now is that when I hit shutdown, the computer hangs on a purple shutdown screen. Usually, at this point, I press the power button on the machine to completely power off the machine. I am new to ubuntu, and would appreciate the help. Thanks.

    Read the article

  • nvidia driver problems after upgrading to 3.2.0-26 on Ubuntu 12.04 64bit

    - by Lev Levitsky
    After installing latest updates I can't set screen resolution higher than 1024x768; every time after the boot I get a message Could not apply the stored configuration for the monitors (Note: removing ~/.config/monitors.xml stopped the message, but not the problem) I can boot with 3.2.0-25 and the graphics look normal. Here's what I have in /var/log/apt/term.log (excerpt): Setting up linux-image-3.2.0-26-generic (3.2.0-26.41) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic update-initramfs: Generating /boot/initrd.img-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-26-generic Found initrd image: /boot/initrd.img-3.2.0-26-generic Found linux image: /boot/vmlinuz-3.2.0-25-generic Found initrd image: /boot/initrd.img-3.2.0-25-generic Found linux image: /boot/vmlinuz-3.2.0-24-generic Found initrd image: /boot/initrd.img-3.2.0-24-generic Found linux image: /boot/vmlinuz-3.2.0-23-generic Found initrd image: /boot/initrd.img-3.2.0-23-generic Found linux image: /boot/vmlinuz-3.0.0-17-generic Found initrd image: /boot/initrd.img-3.0.0-17-generic Found memtest86+ image: /boot/memtest86+.bin I went to "additional drivers" and saw some updates available there, but an attempt to install them failed, leaving the following in /var/log/jockey.log (long log, pasted here). The full log won't fit in the question, so I'm showing $ fgrep 'ERROR' /var/log/jockey.log 2012-06-30 17:29:57,897 WARNING: modinfo for module vmxnet failed: ERROR: modinfo: could not find module vmxnet 2012-06-30 17:29:57,937 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2012-06-30 17:29:58,072 WARNING: modinfo for module nvidia_96 failed: ERROR: modinfo: could not find module nvidia_96 2012-06-30 17:29:58,240 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-06-30 17:29:58,293 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:29:58,351 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-06-30 17:29:58,385 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-06-30 17:29:58,420 WARNING: modinfo for module nvidia_96_updates failed: ERROR: modinfo: could not find module nvidia_96_updates 2012-06-30 17:29:58,455 WARNING: modinfo for module ath_pci failed: ERROR: modinfo: could not find module ath_pci 2012-06-30 17:29:58,478 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-06-30 17:29:58,531 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-06-30 17:29:58,588 WARNING: modinfo for module omapdrm_pvr failed: ERROR: modinfo: could not find module omapdrm_pvr 2012-06-30 17:29:59,537 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-06-30 17:29:59,613 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-06-30 17:29:59,686 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-06-30 17:29:59,764 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:30:29,544 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:30:29,545 ERROR: XorgDriverHandler.enable(): package or module not installed, aborting I'm not sure if it's a bug, as the first log shows some errors. What can I try?

    Read the article

  • 12.04 Does anyone know how to fix this? all of a sudden - my Terminal shortcut doesnt work and windows only appear in top left corner [closed]

    - by Alex Poulos
    So basically after doing a few updates - my Ubuntu 12.04 told me that an error has occuredand when i tried to report it it said this is not an official ubuntu package please remove packages and try again or something of the sort - now my terminal shortcut doesnt work and my windows all appear in the upper left corner how can I fix this and how can I find what's causing the issues? I am using gnome-classic-fallback btw Screenshots added:

    Read the article

  • Mount: "The disk drive for UUID=<uuid for /> is not ready yet or not present."

    - by searchfgold6789
    I recently did the update from 12.04 to 12.10 on my old Dell Latitude CPx laptop (Pentium III). When I rebooted I got this error message with no response from keyboard input. Below it is says Wait to continue, press S to skip mounting, or M for manual recovery. I also see occasional errors pop up on the screen from mountall and Plymouth. I can still get into Recovery Mode. Can anyone shed some light on the matter?

    Read the article

  • Can I delete Generic kernel if I use Generic

    - by user206049
    I currently can't update my release as there is not enough space on boot. I just have the one kernel version there, but seem to have both the Generic and Low Latency versions. uname -r just shows 3.8.0-32-lowlatency ls -lah /boot shows -rw-r--r-- 1 root root 899K Oct 2 00:00 abi-3.8.0-32-generic -rw-r--r-- 1 root root 899K Oct 7 09:27 abi-3.8.0-32-lowlatency -rw-r--r-- 1 root root 152K Oct 2 00:00 config-3.8.0-32-generic -rw-r--r-- 1 root root 152K Oct 7 09:27 config-3.8.0-32-lowlatency drwxr-xr-x 3 root root 2.0K Jan 1 1970 efi drwxr-xr-x 5 root root 1.0K Oct 22 10:05 grub -rw-r--r-- 1 root root 32M Oct 22 09:51 initrd.img-3.8.0-32-generic -rw-r--r-- 1 root root 32M Oct 22 10:05 initrd.img-3.8.0-32-lowlatency drwxr-xr-x 2 root root 12K Feb 25 2013 lost+found -rw-r--r-- 1 root root 173K Dec 5 2012 memtest86+.bin -rw-r--r-- 1 root root 175K Dec 5 2012 memtest86+_multiboot.bin -rw------- 1 root root 3.0M Oct 2 00:00 System.map-3.8.0-32-generic -rw------- 1 root root 3.0M Oct 7 09:27 System.map-3.8.0-32-lowlatency -rw------- 1 root root 5.2M Oct 2 00:00 vmlinuz-3.8.0-32-generic -rw------- 1 root root 5.2M Oct 7 09:27 vmlinuz-3.8.0-32-lowlatency So what can I do to allow me to update? Apparently I need 174m on boot and am 40m short.

    Read the article

  • No Grapical log in or anything just terminal code!!

    - by Jonthue
    I just install the unity alpha state 3, and i came across two errors, one stating it could not install a desktop feature or so and the other just had some errors that i had snap shot the error. When it says it was complete I restarted it and after it booted up, i see a long line of boot codes and then it stop with log in name and the after i put my log in name it ask for a password, but the thing is that their was no graphical lil window having my picture and my name, all I see was codes from terminal even after it admitted me in. Black screen white coding like it was a terminal on full screen only every thing was via terminal!!! HELP!!!!

    Read the article

  • How do I handle "Firmware file X not found" stopping bootup?

    - by John Baber
    I recently upgraded my desktop mac to Precise and now can't get past the Ubuntu 12.04 splash page. The splash freezes with [ 19.931097] b32-phy0 ERROR: Firmware file "b43/ucode16_mimo.fw" not found [ 19.9311126] b32-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. written on it This is when I choose 3.2.0-generic from the grub menu. If I choose to load up older kernels, I still get the same thing. How can I make my computer finish booting again? I'm able to ssh into the machine and poke around, but the actual screen freezes at the splash.

    Read the article

  • My computer has begun to restart after I upgraded

    - by Voidcode
    After updating to Ubuntu 11.04. My computer started to turn off and reboot. This happens about every half hour, I think there is a tendency to happen when I work with multiple applications at once. It is both my Desktop and Labtop. I has installed- BOINE Manager, PlayOnLinix GIMP, Qt, Wine, VLC-player, Blender 2.57 Otherwise is all as default. Update: See my /var/log/kern.log.1 here: http://paste.ubuntu.com/608690

    Read the article

  • Why ubuntu 13.10 always show "access prompt" when start?

    - by Davuz
    After my Ubuntu PC update from 13.04 to 13.10, when start up, an access prompt always show and ask me password for "[email protected]". I was input password for email or another services, which registed with "[email protected]", but it's still "incorect". I can close but next time, it appears again. It never appeared before 13.10. What is application show that prompt? How can I turn off this? Here is access prompt?

    Read the article

  • How to know the number of pins on my laptop's ram?

    - by Rajat Saxena
    I am thinking about upgrading my laptop's ram.How can I get to know the number of pins on my ram without opening my laptop? I ran this command sudo dmidecode --type memory and got following info: Handle 0x0019, DMI type 17, 27 bytes Memory Device Array Handle: 0x0017 Error Information Handle: 0x001A Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: SODIMM Set: None Locator: DIMM0 Bank Locator: BANK 0 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: AD00000000000000 Serial Number: 04008104 Asset Tag: Unknown Part Number: 040404040404040404040404040404040404 Can anyone help?

    Read the article

  • Administrator user session only shows a terminal

    - by Saariko
    Weird problem: After upgrading to 11.10 (and I am sure that I worked with it for couple of days). We had a power failure, and now, when open the computer, what I get is a screen, with a scrollable list of users (administrator is one of them). When I select the administrator user, and login, I get on the top left a terminal window. That's it ! I don't see my regular ubuntu desktop. What's wrong? I have tried some of the issues mentioned here: Delete the .Xauthority sudo apt-get update *I had some DNS errors, so had to fic my /etc/resolv.config (works now) please advise.

    Read the article

  • 1080p Screen resolution problem after 10.04 to 12.04 update

    - by Ale
    I have a Samsung LCD 40" with a NVidia GeForce 6150SE nForce 430 Card. I recently upgraded from 10.04 to 12.04 and the best resolution I can get is 1360x768. I've tried the propietary drivers available on the repository kmod:nvidia_current kmod:nvidia_173_updates kmod:nvidia_current_updates kmod:nvidia_96 kmod:nvidia_96_updates kmod:nvidia_173 I've also downloaded latest from NVidia's Web, version: 295.40. But still no luck. With Nouveau driver, I can only get 1024x768. I know there is no problem with my hardware (video card, cable and monitor), I was using it perfectly on 10.04. Can anybody suggest something else I could try, to get my 1920x1080 resolution back? Thanks in advance. Here are some more information, that I got reading other similar posts on askubuntu. $ lspci | grep VGA 00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) $ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 240, current 1360 x 768, maximum 1360 x 768 default connected 1360x768 0 0 0mm x 0mm 1360x768 50.0 52.0* 1024x768 51.0 800x600 53.0 54.0 55.0 680x384 56.0 57.0 640x480 58.0 576x432 59.0 512x384 60.0 400x300 61.0 62.0 63.0 320x240 64.0

    Read the article

  • Does upgrading a kernel automatically enable trim?

    - by Sheldon Ross
    Simple question, I have some servers that were running 10.04 that I upgraded to 12.04. So they were installed using 10.04 (kernel 2.6.32* I believe) and the version of ext4 that shipped then. By upgrading to 12.04 and the newer kernel, does that enable TRIM automatically? (Do I need to add 'discard' to the fstab?) Or do I need to do a clean install of 12.04 to get TRIM functionality on those drives.

    Read the article

  • How can I manage keyboard shortcuts in 11.10 Oneric?

    - by Mike
    In 10.04, I've had a keyboard shortcut defined via it's keyboard settings applet. Recently I have upgraded to 11.10 (I use gnome-classic). This shortcut still works, but I can't find it in System Setting's Keyboard applet. This means I don't know how to disable it. Not that it bothers me too much (now, at least), but not being able to control my own computer doesn't seem very pleasant. Where does Ubuntu store my keyboard shortcuts? BTW, I do not use compiz, and I can't find my shortcut in gconf either.

    Read the article

  • Older PHP v/s newer PHP version [closed]

    - by Monty
    My company is building a website with database. Programmer's used PHP 5.0. My Service Provider (shared) in the meantime upgraded to PHP 5.3.0. Fixes have been on going and seem endless... Do I move to VPS and install older PHP or should we rebuild with newer PHP? When working remotely with programers what is the protocol regarding delivery of all code? Please what is the industry standard? I need an independent to review their work. How should this be approached?

    Read the article

  • Xubuntu 12.4 upgraded fine but there are everywhere pale grey windows/menus with white fonts!

    - by Costa
    I upgraded to Xubuntu 12.4 through the update manager. Everything works fine except that many windows and menus (Ubuntu Software Center,Transmission properties etc) apear in pale grey with white fonts. For examle, it's impossible to read n change properties on Transmission. Titles apear excellently, the rest is really hard to read: white text on allmost white background ... I have tried already:rebooting, changing theme/apearance photo1 http://en.zimagez.com/zimage/-26042012-102025.php When login as guest everything works fine. I created a new account, all is fine photo2 http://en.zimagez.com/zimage/-26042012-103258.php But I still want my initiall user-account which i had so well tuned...

    Read the article

  • 13.10 Saucy login issues; black screen, loop, and freeze

    - by user135598
    Once upgraded to I 13.10 I was not able to get past the login screen. I had the black screen. Also; I can not log on with low graphics mode from recovery either. It makes no difference if I try default graphics driver or not. Then after running sudo install -f from recovery root prompt I got a login loop. I have purged fglrx, fglrx-legacy, and nvidia-current. I updated my repository with xorg-edgers and reinstalled nvidia-current. Now it semi-freezes at the login screen when I try to log on as my normal user. I say 'semi' because I can still use my mouse to click on the upper right hand Ubuntu logo and Shut Down or Restart the PC. I still cannot log on with my user name, but I can through the Guest login. While logged in as Guest I added a new user account with administrative privileges. I CAN log into this account without problem and from here am able to see that my .dmrc file in my original account reads: [Desktop] Session=XBMC I have changed 'Session=XBMC' to 'Session=ubuntu' and rebooted, but to no avail. The file resets itself and makes a backup of my changes. Any help would be greatly appreciated.

    Read the article

  • Problem after upgrading to 13.10

    - by paul Barnett
    I am a new user to Ubuntu and not a very accomplished user. I have dual partitioned my laptop, recently upgraded to Windows 8.1 and also Ubuntu 13.10.Now when I boot into Ubuntu I get a running line of 3's and squiggles followed by scrolling (with a fail on the line "reload cups, upon starting avahi-daemon to make sure remote queues are populated"). If I press any key, but mostly return, it will boot into the password page. Any ideas? Thanks.

    Read the article

  • Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

    - by Korakys
    Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

    Read the article

  • Why can't I get into my repositories?

    - by ken1943
    Upgraded from 10.04 to 10.10 by mistake and am having problems with some of my programs. They either don't work or they disappear from view on the screen. The Repositories menu item in Synaptic Packages Manager is a case in point. The computer does nothing when I choose this item. I am locked out of unless I edit /etc/apt/sources.list. The rest of the application seems to work, however. Update Manager just flashes on screen then disappears without doing, as does Printing. How do I downgrade from a higher to a lower level repository? I need to downgrade from 10.10 to 10.04. Each time Ubuntu upgrades to 10.10 evil things happen and the operating system really gets messed up. I really do not want to have to erase and install my operating system all over again if I can help it.

    Read the article

  • Upgrading a dual-boot system HDD

    - by Jason
    I dual-boot my laptop due to lousy VM performance, and have a new 500GB/7200rpm drive coming in to replace the stock 320GB/5400rpm drive. I have the drive set up in three partitions: one for the Win7 system files, one for storage, and the third as the ext4 Linux file system. The system file and storage partitions are both NTFS. What I'm planning to do is use the system image creator built in Win7, then move that over to the new drive. However, how can I migrate the Ubuntu partition, and how do I make sure that the Grub bootloader isn't overwritten by the Windows loader?

    Read the article

  • Wifi not working after upgrading from 12.04 to 13.10

    - by Gary
    I went through loads of posts looking for an answer to my WiFi problems but can't seem to fix it. I had Ubuntu 12.04 installed and WiFi worked fine with no issues whatsoever but then I upgraded to 13.10 it has stopped working. It shows the available networks but I can't connect to any of them it just does that animation thing then stops working. Update Heres the link to pastebin: http://pastebin.com/GyMMEYhv And heres what wifi card i have and driver lspci: 01:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a) Subsystem: Hewlett-Packard Company Device [103c:18de] Kernel driver in use: r8169 02:00.0 Network controller [0280]: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe [1814:3290] Subsystem: Hewlett-Packard Company Device [103c:18ec] Kernel driver in use: rt2800pci

    Read the article

  • Problems after upgrading from 10.04 to 12.04

    - by Paul D
    I upgraded to 12.04.1 from 10.04 recently and am running the Gnome Classic (no effects) desktop. I spent a couple of days tweaking the appearance and behaviour but there are two issues that I can't resolve. The mouse cursor frequently disappears, especially when scrolling through web pages or hovering over links/icons with tooltips. Moving the mouse brings the pointer back but it vanishes again almost immediately. Note I don't have unclutter or Parallels installed. The screen no longer fades to black when left idle for too long - it just cuts out. Bad news when watching content online. Any tips greatly appreciated. Cheers...

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >