Search Results

Search found 2571 results on 103 pages for 'extend'.

Page 41/103 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• Use xrandr to set the absolute position of the screen?

  - by Eli

  I am running XFCE on Fedora 15. I use xrandr to set the secondary display (HDMI-0) to be to the right of the primary (DVI-0), however it is always at the top-right. Is it possible to set the absolute position of the display (e.g. DVI-0 at 0,0 and HDMI-0 at 1920,56), or even set the display to be at the bottom-right? I cannot modify the Xorg.conf, which would be the easy way, as that would mean generating an Xorg.conf file (there is none right now), and I do not know of any automated tool to do that (other than the fglrx driver). The reason why I need this is because I want to extend the XFCE panel accross both monitors, but with there being a 56-pixel-wide dead zone at the bottom I cannot do this.

  Read the article

• How to quickly switch monitors on multi-monitor setup? (W7)

  - by Saxtus

  At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer? Thanks in advance.

  Read the article

• Access points fighting for dominance?

  - by Phillip Oldham

  We have a small office with a large number of wireless devices (a mixture of desktop machines, laptops, and wifi-enabled phones) all working from a single Apple Airport Extreme which extends our wired network. I've added another Airport Extreme for resiliency, since we've been seeing a decrease in performance and (as far as I understand) access points can only handle a small number of clients. I set the new AP to extend the current network so that the clients weren't constantly switching between different wireless networks, however as soon as this AP was configured all the wireless devices started seeing network trouble, flicking on and off. I'm assuming that this is because both APs are reasonably strong, and the client can't decide which to use. What is the best route to follow to resolve this? What I'm aiming for is wireless resiliency; preferably having two APs share the network load, or if this isn't an option then having a primary AP with a "fail-over", should the primary go down for any reason.

  Read the article

• Why is my USB-to-VGA'd monitor working, but not showing in Display Settings?

  - by Strilanc

  I have a USB-to-VGA adapter, which I use to connect a second monitor to my laptop (totaling 3 screens). It worked alright with Vista. I upgraded to Windows 7, and now it no longer works properly (I downloaded the latest drivers just to get it to work on 7). The extra monitor is detected and used to extend the desktop (I can move things onto it, etc), but is not shown within the Control Panel. This is annoying because now I can't changes its resolution, set its logical position to match its physical position, etc. Can I do anything, besides waiting for better drivers? I'm mainly concerned with moving its logical position. (I'd also like to understand how Windows can use a monitor it can't detect. Weird.)

  Read the article

• How to move selection in Excel?

  - by John van der Laan

  I know how to create or extend selections, i.e., via F8 or Shift F8. When I have created the desired selection, I would like to move that particular selection a few cells to the right and/or down. I now need to select the similar form selection on another place in the worksheet. Does anyone know how I can do this? Example: Selection made on A1..B3, C3 and D5 and, for instance, made it Yellow. I now want to move this complete selection four places to the right, to E1..F3, H3 and I5 (to be able to make it another color). It has nothing to do with the cut and paste to move cells.

  Read the article

• Why doesn't Windows 7 allow me to format?

  - by hydroparadise

  Dell support can be fun to deal with right? Ultimately, I have been going back and forth with Dell on an issue and came to reinstalling Windows 7 32-Bit Pro. The problem is that Windows Setup will not let me format. I've read other posts that say Windows 7 must installed on first partition here. But now that confuses me because the computer came shipped with the installation on the third partion as shown in the picture below? Is there a real problem? Or is this a Microsoftism? Should I obliterate the "OEM" partition to make this work? Please note that the format, delete, new, and extend options are grayed out.

  Read the article

• What is the best way to run ClamAV on Windows Server 2008 R2

  - by gabbsmo

  I'm hosting a Wordpress-site on Windows Server 2008 RS and want to scan all files that are uploaded by users for viruses using this plugin http://wordpress.org/extend/plugins/upload-scanner/. I'm on a really tight budget (no profit) so ClamAV seem like a good choice. What is the best way to run ClamAV under these circumstances? I'm concidering the following options: Just running the raw windows build from http://sourceforge.net/projects/clamav/ an setup definition updates with task scheduler. Any way to automate updates of the scanner (binaries)? Using a "distro" like ClamWin or Immunet (advertised on clamav.net). Any suggestions are welcome.

  Read the article

• How can I join non-consecutive partitions on internal hard disk?

  - by Andy

  I recently installed a new, larger hard disk in my PC at work (the office wouldn't spring for an upgrade for my 75GB disk, so I brought my own 2TB disk in from home). I managed to clone the original drive using CloneZilla, but now I have a 75GB partition on my new drive, followed by a 300MB partition, followed by a 1794.65GB of unallocated space. What I want is to add the unallocated space to the 75GB partition, thereby maximizing my C: drive. However, when I right-click on the C: partition, the option to "Extend Volume" is grayed out. How do I get all my fancy new extra space to be part of my C: drive? I also tried booting with GParted, but I get the same deal - cannot adjust the C: drive because there's no contiguous space.

  Read the article

• How much does it wear an SD card to be frequently removed/reinserted?

  - by jtbandes

  My digital camera (a Sony a55) stores photos on an SD card. When I want to transfer these to my computer (a mid-2010 MacBook Pro), I have two options: use the USB cable to connect the camera to the computer, or use the computer's built-in SD card reader. The camera's SD card slot is the standard click-in, click-out (spring-loaded) mechanism. My laptop has a simple slot into which the card slides with a little more resistance than the former (the card slides only about halfway in so it can be easily removed). I notice that the card's contacts now have some shiny marks from one or both of these card slots: Does this type of wear threaten to significantly damage the card? Should I avoid switching the card between slots frequently, to extend its lifetime?

  Read the article

• Supermicro MBD-X9DRL-IF-B and 8 X Hynix 4Gb DDR3 ECC dont boot

  - by Avi Keinan

  I have a custom build server with 2 Xeon E5-2609 and Supermicro MBD-X9DRL-IF-B. Right now the server has 4X Hynix 4Gb 2Rx8 PC3L-10600R-9-10-B0 HMT351R7BFR8A. and its working great. We baught another 4 from the same series of memory, when we installed all the ram (4 sticks already installed and we added 4 new sticks) the server didn't boot. When we replaced the current memory with the new memory - the server did boot. Right now we are in a problem because we need to extend this server ram but the motherboard don't run with 8X4Gb. Any ideas why? I have attached a picture with one of the current memory stick and one of the new memory stick. Thanks in advence.

  Read the article

• Waht are the best proxy servers for Mikrotik router?

  - by niren

  I want to setup proxy server for my Mikrotik router. There is inbuilt web-proxy for Mikrotik router but I can extend this upto transparent proxy(kind of proxy server) only. We need High anonymity proxy so that we can hide our LAN static IPs(we don't have private IP) from outside Intruder/hackers. And also I know I can setup NAT rule to hide our IP(only private IP not public/static IP) as per this link, but I cann't hide static/public IP. Essentially I want to hide our Public/Static IP (there is static/public IP for all systems in our company) from outside Internet. To achieve this I guess I need other software apart from Mikrotik router gateway setup. can anyone suggest me Is there any other software to achieve my requirement? I know about squid proxy but am not sure whether It can hide our static/public IP. Note: we have assigned public/Static IP to all systems of our company since we have rights to access our company's system from anywhere by dedicated laptop(given by our company with more security) through VPN connection.

  Read the article

• emulate dual monitor using a second machine

  - by Hemal Pandya

  I have monitors of my two machines side by side and I use them both with a single keyboard/mouse using Google Synergy+ which works great. But is it possible to use the monitor of my secondary machine as the secondary monitor of my primary? I am on XP so from what I understand I cannot just rdc from secondary to this primary. In any case that would be a different session altogether and I would prefer to be able to extend my desktop over the two monitors. Any solutions or suggestions? Thanks in advance.

  Read the article

• emulate dual monitor using a second machine

  - by Hemal Pandya

  I have monitors of my two machines side by side and I use them both with a single keyboard/mouse using Synergy+ (now hosted at Google Code) which works great. But is it possible to use the monitor of my secondary machine as the secondary monitor of my primary? I am on XP so from what I understand I cannot just rdc from secondary to this primary. In any case that would be a different session altogether and I would prefer to be able to extend my desktop over the two monitors. Any solutions or suggestions? Thanks in advance.

  Read the article

• Why is my metro screen getting extended to half of the second screen?

  - by maximusyoda

  When I extend my desktop to the second screen, it stays fine for a few minutes, but after a while, the first metro screen stretches all the way to half of the second screen. The search bar etc stops working. The desktop itself shares fine. But the metro screen is messed up as well as the resolution. The second screen is using the recommended resolution. All I want is to have an extended screen. The problem occurs in my office Windows 8 laptop as well. Not sure what to do with it. Device: Surface Pro 2 External Monitor: Dell 2208WFP 1680 x 1050 Pixel Resoultion 22''

  Read the article

• Resizing partition in VMware Fusion didn't work

  - by Robot

  I migrated a Parallels VM to VMware Fusion. That worked well, although the original partition size was way too small (8GB). Following some instructions from VMware, I used the Fusion GUI to extend the size of the disk to 20GB, and then I booted from a GPartEd LiveCD to grow the C: partition to the full 20GB. That seemed to work, and I can see that the disk is 20GB in Disk Manager, but it still thinks the actual partition is 8GB. Here is a screenshot of it. What can I do to get the entire 20GB usable?

  Read the article

• Logitech Revue - tv picture extends too far off left/right side of tv?

  - by super user

  Hi, I got a logitech revue (for google tv). I hooked it up, works ok, but the picture is not fitting horizontally in my hdtv. The hdtv is a Sony Bravia, 2010 model. The tv picture is fitting vertically just fine, but it looks like the left and right ends of the picture extend way off farther than they should be. In other words, it looks like the picture is starting about 4 inches to the left of the left side of the tv, and extends 4 inches past the right edge of the tv. I know in menu - settings you have an option to "maximize" your picture, which works for the vertical directions, but the horizontal directions seem convinced that they're maximized properly and I cannot adjust. Any help here? Thanks

  Read the article

• Too Many Files In Debian Linux Folder?

  - by Dave Potts

  I've been using an external USB drive on a Debian server for backup. The drive is formatted as NTFS and mounted with ntsfmount. This was working fine, but I was filling up a directory with lots of files. Eventually the backup failed. When I then tried to look at the directory using ls it reported: ls: reading directory .: Numerical result out of range Looking in syslog, I also saw this: Sep 23 07:35:31 tosh ntfsmount[28040]: Failed to read index block: Numerical result out of range. Is this simply that I've reached the upper limit of number of files in a directory? If so, is there any way to extend the number of allowed files?

  Read the article

• LDAP encrypt attribute that extends userpassword

  - by Foezjie

  In my current LDAP schema I have an objectclass (let's call it group) that has 2 attributes that extend userpassword. Like this: attributeType ( groupAttributes:12 NAME 'groupPassword1' SUP userPassword SINGLE-VALUE ) attributeType ( groupAttributes:13 NAME 'groupPassword2' SUP userPassword SINGLE-VALUE ) group extends organisation so already has a userpassword attribute. If I use that to enter a new group using PHPLDAPAdmin it uses SSHA (by default) and encrypts/hashes the password I entered. But the passwords I entered for groupPassword1 en groupPassword2 don't get encrypted. Is there a way to make it so that those attributes are encrypted too?

  Read the article

• Setting Screen Resolution for Extended Display on Windows 8

  - by ptamzz

  I'm using a Dell Inspiron laptop with Windows 8 Developers Preview. I've connected a second screen (some Dell 22 inch one) and have been using it with 'Extend these displays' options in the Screen Resolution settings. It use to be all fine but yesterday I changed my VGA cable to the 2nd monitor and since then the resolution of the 2nd monitor is not setting properly. Earlier, while auto detecting the monitor, the right resolution use to appear but now, as you can see from the attached image, none of the resolution in the drop down fits with the right proportion. So how do I set the right screen resolution. (I think the right one is 1680 x 1050 which is not there in the list)

  Read the article

• Circumventing a manual HTML login page for "unclassified" websites

  - by auramo

  The IT department just made my life a little bit harder again: they introduced a manual HTML login page for all websites they have not "classified". This means that all the applications which try to access unclassified websites for e.g. downloading plugins do not work. Examples: Eclipse plugin installation, Maven builds etc. What would be the easiest workaround for this? The best I've come up with is try to extend/customize Ruby's httpproxy.rb that comes with Webrick. I would automate the manual login process whenever that login response page is detected. This sounds quite painful, and I think there might/should be simpler options?

  Read the article

• How can browsers in VMs resolve hostnames of websites on parent PC?

  - by elliot100

  I have a number of local websites in development on my Windows PC, set up as virtual hosts within Apache, with hostnames (along the lines of dev.example.com) resolved via the hosts file, so I can test them out them with various browsers. I now want to extend browser testing to running browsers in various OSs in virtual machines, and want to be able to resolve dev.example.com from the VMs. Currently these are a mix of VMWare Server and VirtualPC. I know I can edit the hosts file on any Windows VMs, but this is a bit fiddly and I'd like a solution which is independent of the individual VMs. I think what I need is a nameserver, but what's the simplest way of going about this? I'd like everything to be self-contained on the one machine. I think I can cover firewall and Apache permissioning issues.

  Read the article

• Windows 2012 - WDS unattend Partition

  - by joe

  I'm trying to install Windows 2012 via Windows 2012 WDS. The installer displays the following error message: the partition selected for the installation (1) does not exist on disk 0. Make sure the unattend answer file's imageselection \installimage setting references a valid partition on this computer, and then restart the installation. the unattend file (created by the "Create Client Unattend" dialog) <unattend xmlns="urn:schemas-microsoft-com:unattend"> <settings pass="windowsPE"> <component name="Microsoft-Windows-Setup" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="x86"> <WindowsDeploymentServices> <Login> <WillShowUI>OnError</WillShowUI> <Credentials> <Username>administrator</Username> <Domain>test</Domain> <Password>xxxx</Password> </Credentials> </Login> <WillWipeDisk>true</WillWipeDisk> <DiskConfiguration> <WillShowUI>OnError</WillShowUI> <Disk> <DiskID>0</DiskID> <WillWipeDisk>true</WillWipeDisk> <CreatePartitions> <CreatePartition> <Order>1</Order> <Type>Primary</Type> <Extend>true</Extend> </CreatePartition> </CreatePartitions> </Disk> </DiskConfiguration> <ImageSelection> <WillShowUI>OnError</WillShowUI> <InstallImage> <ImageGroup>ImageGroup1</ImageGroup> <ImageName>Windows Server 2012 SERVERDATACENTER</ImageName> <Filename>install-(4).wim</Filename> </InstallImage> <InstallTo> <DiskID>0</DiskID> <PartitionID>1</PartitionID> </InstallTo> </ImageSelection> </WindowsDeploymentServices> </component> <component name="Microsoft-Windows-International-Core-WinPE" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="x86"> <SetupUILanguage> <UILanguage>en-US</UILanguage> </SetupUILanguage> <InputLocale>en-US</InputLocale> <SystemLocale>en-US</SystemLocale> <UILanguage>en-US</UILanguage> <UserLocale>en-US</UserLocale> </component> <component name="Microsoft-Windows-Setup" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="amd64"> <WindowsDeploymentServices> <Login> <WillShowUI>OnError</WillShowUI> <Credentials> <Username>administrator</Username> <Domain>test</Domain> <Password>xxxxx</Password> </Credentials> </Login> <ImageSelection> <WillShowUI>OnError</WillShowUI> <InstallImage> <ImageGroup>ImageGroup1</ImageGroup> <ImageName>Windows Server 2012 SERVERDATACENTER</ImageName> <Filename>install-(4).wim</Filename> </InstallImage> <InstallTo> <DiskID>0</DiskID> <PartitionID>1</PartitionID> </InstallTo> </ImageSelection> </WindowsDeploymentServices> </component> <component name="Microsoft-Windows-International-Core-WinPE" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="amd64"> <SetupUILanguage> <UILanguage>en-US</UILanguage> </SetupUILanguage> <InputLocale>en-US</InputLocale> <SystemLocale>en-US</SystemLocale> <UILanguage>en-US</UILanguage> <UserLocale>en-US</UserLocale> </component> </settings> </unattend> Any idea why it is not working? thanks

  Read the article

• Mac Console.app not logging any messages

  - by karl_

  I recently attempted to overcome the 500 message limitation on console logs using the advice provided here: Mac: Extend or disable 500 Messages Limit of Console I copied the PLIST file onto my desktop, made the modifications, and re-copied into the LaunchDaemon folder. No dice. Unfortunately, this also broke logging in general- the console hasn't logged a message since I attempted this switch. I even went back and undid my changes. Still no logs. What's going on? Is there a way to reinstall Console.app, or revert to original settings?

  Read the article

• Install Windows 8 Apps to custom directory

  - by Timothy Ford

  I'm running Windows 8 Pro on a laptop. I initially installed the OS just to fiddle round with it and get to know something I'd inevitably end up having to fix for someone. The problem being I only gave the partition about 32gb and that ran out pretty quick. I'd like to install office and get used to that as well but unfortunately I'm a few gigabytes short. I'd like to know if I can change the install location of office 2013 and other apps so that I can run them from another partition because there is no space left to the right of this partition I can't extend it.

  Read the article

• Simple Ubuntu Server - Expanding disk space - adding a new drive LVM, RAID0 existing setup - how?

  - by NightWolf

  I have a 1TB ext4 partition mounted at / with all my data and Ubuntu 11.04 (natty) installed. Now this drive is almost full (I used it as a database server for some processing). RAID0 is ok, I can take a failure (touch wood). But I need a way to grow this partition. I have a new 1TB drive I want to add, however as my Ubuntu boot and all data is on the one partition I'm not sure how I can go about setting up a RAID0 or LVM array without loosing all my data. So the question is how can I extend my existing ext4 partition over two physical drives without losing data? Thanks!

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >