Search Results

Search found 6033 results on 242 pages for 'partition magic'.

Page 41/242 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• Partition is missing in /dev

  - by haimg

  I'm having a strange problem since I moved from Centos5 to Centos6. I have three disks, first two are used as a RAID1, and third one is a stand-alone backup disk that is not listed in /etc/fstab (it is mounded when needed and then unmounted). My problem: After a boot, /dev/sdc exists but /dev/sdc1 does not. Also, the links in /dev/disks are also absent for the first partition of sdc. Disk itself is fine, and if I hot-remove it and plug it back in, /dev/sdc1 appears ok and everything is working. My question: What subsystem manages auto-discovery of disks, partitions, etc. during the boot process (e.g. what creates /dev/disks/by-label)? How do I configure it to scan /dev/sdc too and create all relevant files and links in /dev ? Edit: Here's the relevant part of dmesg output (the only place sdc appears). It does list sdc1, but it's not in /dev! sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdc: sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: DMAR:[DMA Read] Request device [00:1e.0] fault addr 361bc000 DMAR:[fault reason 06] PTE Read access is not set sdb1 sdb2 sdb3 sdc1 sda1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: [sdc] Attached SCSI disk sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk

  Read the article

• centos install / partitioning

  - by ServerSideX

  I'm using NOC-PS to remotely install Centos 6.2 via KVM / IPMI. I'm going to install cPanel as well and they recommend this layout /boot (99MB) swap (2x server RAM) / (remainder) In the o/s install profile within NOC-PS software, it shows as this: part /boot --fstype ext2 --size 250 part pv.01 --size 1 --grow volgroup vg pv.01 logvol / --vgname=vg --size=1 --grow --fstype ext4 --fsoptions=discard,noatime --name=root logvol /tmp --vgname=vg --size=1024 --fstype ext4 --fsoptions=discard,noatime --name=tmp logvol swap --vgname=vg --recommended --name=swap By the time the default partition setup was done installing Centos, I get this [root@server005 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg-root 532G 907M 504G 1% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 243M 28M 202M 13% /boot /dev/mapper/vg-tmp 1008M 34M 924M 4% /tmp [root@server005 ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Dec 7 18:47:24 2012 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/mapper/vg-root / ext4 discard,noatime 1 1 UUID=58b31aaf-5072-4fb1-a858-33bc316fa793 /boot ext2 defaults 1 2 /dev/mapper/vg-tmp /tmp ext4 discard,noatime 1 2 /dev/mapper/vg-swap swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 My question is, how should the NOC-PS install profile look like to get the recommended cPanel partitioning? The server has 16GB RAM, dual 600GB SAS drives and will be used for cPanel shared hosting.

  Read the article

• Linux: Encryption of a physical LVM volume doesn't imply encryption of its logical subvolumes?

  - by java.is.for.desktop

  Hello, everyone! I installed OpenSuse one year ago on my notebook. I created all partitions except /boot inside an LVM partition. I enabled encryption for it during setup. The system asked me a password on each boot later. Everything seemed fine... But one day I wanted to cancel the boot process and did it with SysRq REISUB. During entering this combination, the system suddenly continued to boot without any password being entered. I had no /home and no swap, but / was mounted! I checked multiple times, it was inside an "encrypted" physical LVM volume. Later I found out that OpenSuse can't encrypt / at all. There is an option to enable encryption for each logical volume, and indeed it fails for /. Later I tried Fedora. The options during partitioning were misleading by same means. I could enable "encryption" of a physical volume and each logical subvolume. With the exception that Fedora actually allowed to encrypt /. Question: What's the point of setting up "encryption" for a physical LVM volume, when it doesn't imply (real) encryption of its logical subvolumes? Did I get something wrong in this whole concept?

  Read the article

• Data recovery on working hard drive

  - by emgee

  So I have a 5 bay hot swap SATA enclosure that's connected to a Silicon Image-based SATA adapter in a computer. It's running XP Pro. There are two 1.5TB hard drives in slots 1 and 2 respectively, set up using RAID 1 using the the Silicon Image utility. There are also two 1TB drives in bays 3 and 4, also set to RAID 1 the same way. The partitions for both RAID arrays are Dynamic partitions. A few days back, there was a bare hard drive that needed some files copied off of, so it was popped it in bay 5, that bay to pass-through, and the copied data off of it. Later, I noticed that my 1.5TB drives no longer showed up in windows. In the Silicon Image utility, the drives showed up fine, no error. However, in Device Manager, it shows the RAID 1 array as uninitialized. It shows up as the right size, etc., but nothing else. There's no sign of anything wrong with either drive, so I'm not sure what happened exactly. I'm not the only one who has access to that computer, so it is possible there is something else done to it that I don't know of. There's quite a lot of data on it still, and if at all possible, I'd prefer to not send it to Ontrack. Does anyone know of software that would restore the partitions, keeping in mind that it's a Windows LDM partition? I have access to a variety of Operating Systems, so something that would work on Mac, Windows or Linux would be acceptable. The programs I usually use are not compatible with LDM.

  Read the article

• Can I recover a non-system disk deleted during 2008 R2 setup?

  - by serialhobbyist

  I've done a truly stupid thing and 'deleted' the data disk on a Server 2008 R2 box. Can I recover it? If so, how? I was rebuilding the box because a motherboard change had broken things. I've built loads of boxes and was going through the standard stuff without much concentration. I got to the disk screen which normally displays the two paritions on the drive: the recovery one and the system one. As normal, I deleted the two things I saw. It was only when two lots of unallocated space didn't merge into one that the full horror of what I'd done hit me. Yes, I've got backups... of the stuff I have space to back up. The real irony is that, earlier in the day, I'd ordered to 1 TB disks to deal with the problem. So, anyway, I'd really like to get this partition back because it'll save me a lot of time. How can I do it?

  Read the article

• Linux Server partitioning

  - by user1717735

  There's a lot of infos about this out there, but there's also a lot of contradictory infos… That's why i need some advices about it. So far, on the servers i had home for test (or even "home production") purposes i didn't really care about partitioning and i configured all in / + a swap partition, over RAID 0. Nevertheless, this pattern can't apply to production servers. I have found a good starting point here, but also it depends on what the servers will be used for… So basically, i have a server on which there will be apache, php, mysql. It will have to handle file uploads (up to 2GB) and has 2*2TB hard drive. I plan to set : / 100GB, /var 1000GB (apache files and mysql files will be here), /tmp 800GB (handles the php tmp file) /home 96GB swap 4GB All of this if of course over RAID 1. But actually, it's not a big deal if I lose data being uploaded, so would it be interesting mounting /tmp over raid 0 while maintaining the rest over raid 1? Sounds complicated…

  Read the article

• Windows 8.1 - Why are there multiple recovery partitions in the system?

  - by Abhiram

  DISKPART> list partition Partition ### Type Size Offset ------------- ---------------- ------- ------- Partition 1 System 500 MB 1024 KB Partition 2 OEM 40 MB 501 MB Partition 3 Reserved 128 MB 541 MB Partition 4 Recovery 490 MB 669 MB Partition 5 Primary 920 GB 1159 MB Partition 6 Recovery 350 MB 921 GB Partition 7 Recovery 9 GB 921 GB Above is the list of partitions on my system that I recently upgraded to Windows 8.1. Why are there multiple recovery partitions (4,6,7)? Shouldn't there be just one recovery partition? And what is the Reserved partition (#3) for?

  Read the article

• Hello, T4MVC &ndash; Goodbye, ASP.NET MVC &ldquo;magic strings&rdquo;

  - by Brian Schroer

  I’m working on my first ASP.NET MVC project, and I really, really like MVC. I hate all of the “magic strings”, though: <div id="logindisplay"> <% Html.RenderPartial("LogOnUserControl"); %> </div> <div id="menucontainer"> <ul id="menu"> <li><%=Html.ActionLink("Find Dinner", "Index", "Dinners")%></li> <li><%=Html.ActionLink("Host Dinner", "Create", "Dinners")%></li> <li><%=Html.ActionLink("About", "About", "Home")%></li> </ul> </div> They’re prone to misspelling (causing errors that won’t be caught until runtime), there’s duplication, there’s no Intellisense, and they’re not friendly to refactoring tools.   I had started down the path of creating static classes with constants for the strings, e.g.: <li><%=Html.ActionLink("Find Dinner", DinnerControllerActions.Index, Controllers.Dinner)%></li> …but that was pretty tedious.   Then I discovered T4MVC (http://mvccontrib.codeplex.com/wikipage?title=T4MVC). Just add its T4MVC.tt and T4MVC.settings.t4 files to the root of your MVC application, and it magically (and this time, it’s good magic) generates code that allows you to replace the first code sample above with this: <div id="logindisplay"> <% Html.RenderPartial(MVC.Shared.Views.LogOnUserControl); %> </div> <div id="menucontainer"> <ul id="menu"> <li><%=Html.ActionLink("Find Dinner", MVC.Dinners.Index())%></li> <li><%=Html.ActionLink("Host Dinner", MVC.Dinners.Create())%></li> <li><%=Html.ActionLink("About", MVC.Home.About())%></li> </ul> </div> It gives you a strongly-typed alternative to magic strings for all of these scenarios: Html.Action Html.ActionLink Html.RenderAction Html.RenderPartial Html.BeginForm Url.Action Ajax.ActionLink view names inside controllers But wait, there’s more! It even gives you static helpers for image and script links, e.g.: <img src="<%= Links.Content.nerd_jpg %>" />   <script src="<%= Links.Scripts.Map_js %>" type="text/javascript"></script> …instead of: <img src="/Content/nerd.jpg" />   <script src="/Scripts/Map.js" type="text/javascript"></script>   Thanks to David Ebbo for creating this great tool. You can watch an eight and a half minute video about T4MVC on Channel 9 via this link: http://channel9.msdn.com/posts/jongalloway/Jon-Takes-Five-with-David-Ebbo-on-T4MVC/. You can download T4MVC from its CodePlex page: http://mvccontrib.codeplex.com/wikipage?title=T4MVC.

  Read the article

• trying to setup multiple primary partitions on ubuntu linux

  - by JohnMerlino

  I currently have ubuntu desktop installed on a harddrive. I want to partition the harddrive so that I can reserve 30 gigs for ubuntu server and 30 gigs for ubuntu desktop. The drive has 300 gigs available. Right now I am booting from dvd drive and installing ubuntu server. I selected "Guided partitioning" and created a 30 gig primary partition of Ext4 journaling filesystem, set "yes, format it" for format partition and set bootable flag to on. I intend to use this 30 gig partition to hold ubuntu server and allow me to boot from it. Now I have two other partitions. They are both set to "logical", one is currently using 285.8 gigs and is using ext4 (when I try to set bootable flag to true, it gives a warning "You are trying to set the bootable flag on a logical partition. The bootable flag is only useful on the primary partitions"). More alarming it says "No existing file system was detected in this partition". Actually, Im thinking that this is the parittion that is supposed to be holding my current Ubuntu Desktop. And of course I want this to be bootable and be a primary partition, so I could dual boot from this and the server partition. Now the third partition is also set to logical and it is being used as swap area. My question is regarding that second partition. Its supposed to be a primary partition thats holding my existing ubuntu desktop edition. How do I switch it to primary and to make sure that its pointing to my existing desktop installation?

  Read the article

• Partition of tables in MySQL

  - by Joel

  Hello, I have read that in a case where a table has many columns, but most of the time only one of them is used (say a title column in a forum post), a way to increase performance would be a partition to two tables, where one will contain only the title and the other one will contain the other columns (such as the forum post body). However, in case I use select ForumTitle from Forum; won't that be good enough to prevent the load of all columns (such as the forum post's body) to the memory, and eliminate the need of partition? Thanks, Joel

  Read the article

• Fill data gaps - UNION, PARTITION BY, or JOIN?

  - by Dave Jarvis

  Problem There are data gaps that need to be filled. Would like to avoid UNION or PARTITION BY if possible. Query Statement The select statement reads as follows: SELECT count( r.incident_id ) AS incident_tally, r.severity_cd, r.incident_typ_cd FROM report_vw r GROUP BY r.severity_cd, r.incident_typ_cd ORDER BY r.severity_cd, r.incident_typ_cd Data Sources The severity codes and incident type codes are from: severity_vw incident_type_vw The columns are: incident_tally severity_cd incident_typ_cd Actual Result Data 36 0 ENVIRONMENT 1 1 DISASTER 27 1 ENVIRONMENT 4 2 SAFETY 1 3 SAFETY Required Result Data 36 0 ENVIRONMENT 0 0 DISASTER 0 0 SAFETY 27 1 ENVIRONMENT 0 1 DISASTER 0 1 SAFETY 0 2 ENVIRONMENT 0 2 DISASTER 4 2 SAFETY 0 3 ENVIRONMENT 0 3 DISASTER 1 3 SAFETY Question How would you use UNION, PARTITION BY, or LEFT JOIN to fill in the zero counts?

  Read the article

• Partition loop understanding

  - by user1795732

  Why the loop body of the partition method never throws an ArrayIndexOutOfBounds Exception? public static int partition( int[] a, low, high ) { int k = low, m = low; /* loop invariant: * low <= k <= m <= high and * all elements in a[low..k-1] are RED (i.e., < pivot) and * all elements in a[k..m-1] are BLUE (i.e., >= pivot) */ while (m != high) { if (a[m] >= pivot) // a[m] is BLUE { } else { // a[m] is RED swap(a,k,m); k = k+1; } m = m+1; } return k; }

  Read the article

• How to move the Windows 7 bootloader to the Windows 7 partition?

  - by pauldoo

  I recently installed Windows 7 in a triple boot setup alongside XP and Linux. When I was finished and was in the process of restoring the bootloader for Linux I discovered something strange about what Windows 7 had done. I discovered that Windows 7 had not installed a bootloader to it's own partition, and instead had instead set up a bootloader on the pre-existing XP partition that offers a choice between 7 and XP. This behaviour has been noticed by others. Now my booting is slightly odd. I have GRUB on the MBR which lets me choose between Linux and Windows. When I select Windows I have Grub boot to the XP partition where I get the 2nd choice between 7 and XP. Why doesn't the Windows 7 installer put the Windows 7 bootloader on the Windows 7 partition like all previous MS OSs? This is now going to be a real problem for me, as I now want to wipe the XP partition and install something else there (probably another non-MS OS). How can I move the bootloader for Windows 7 onto the Windows 7 partition, thus making it bootable and allowing me to safely wipe the XP partition?

  Read the article

• Can't find partition tab in disk utility osX ver. 10.6.8

  - by John W

  I just got a used Mac Book Pro. I created a new admin account and deleted the old one as well as one other user. This is an older late 2007 MBP... the osX upgrade to 10.6.8 was just performed. My Macintosh HD is showing up as Partition 2. I ran disk utility (not from install disk), but there was no partition tab. I have a 160GB drive with only 53GB of space left on it. Since I am the only user and have no files on the laptop yet, I don't understand why there is so little space left. Surely the OS can't use up over 100GB. I wanted to run disk utility to see if there were any recovery partitions or other partition left over from the previous owner that could be erased to make room for expanding the main partition. Unfortunately, there is no partition tab in disk utility. The documentation I have found on line states that this version of osX includes that utility. The osX disks I have are for an older version so I wasn't sure if they would be of any use in solving this problem. Also, I was afraid if using the disks, would I lose the little bit of data/apps that I have assembled. I would rather not do a fresh install and have to do all the updates again to achieve this. The previous owner had some apps that I don't want to lose as I would have to pay handsomely to get them back. Simply, if all the previous users data is backed up on here after deleting user is still taking up space on a recovery partition (that I can't see)... I need to locate it erase it and expand the primary partition to re-aquire disk space for my files. I am new to Mac, so please be as descriptive as possible. Thanks.

  Read the article

• How to reinstall Mac OS X on OS X/Linux dual-boot system?

  - by strangeronyourtrain

  My setup: I have a MacBook Pro 5,5 with a Mac OS X Snow Leopard partition and a Linux partition. I use rEFIt to boot into Linux. I didn't use Boot Camp when I originally installed Linux; instead, I manually created the partition (with either Disk Utility in OS X or Gparted on a Linux live CD--I don't recall which one) and then installed Linux on it from a live CD. The problem: My OS X partition is corrupt, and I need to reinstall Snow Leopard. Since I installed rEFIt from within OS X, I'm concerned that wiping the OS X partition will prevent me from booting into my Linux partition. How can I do this without losing access to my Linux partition? Is it possible to install Snow Leopard on the partition I reserved for it, or will it automatically overwrite the entire drive? And if I do the fresh OS X install and then install rEFIt again, will it automatically recognize my Linux partition? Thanks for any tips! Specs: MacBook Pro 5,5 (Mid-2009); Snow Leopard 10.6.7/64-bit Sabayon Linux, 2.6.36 kernel EDIT/UPDATE: Thanks, but the situation has taken a more complicated turn: I tried to reinstall Snow Leopard from the DVD, but it refused to install onto my Mac partition, claiming: "The disk cannot be used to start up your computer." Disk Utility wouldn't let me resize the partition or create a new one, and it doesn't see my Linux partition. It only displays the two partitions "Macintosh HD" and Linux Swap. I can, however, see all the partitions from Linux. This is the partition table as shown in Gparted: And the output of "fdisk -l" is: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 409639 204819+ ee GPT /dev/sda2 409640 349590464 174590412+ af HFS / HFS+ /dev/sda3 483122745 488392064 2634660 82 Linux swap / Solaris /dev/sda4 * 349590465 483122744 66766140 83 Linux Partition table entries are not in disk order I wonder if this is because I originally partitioned my disk with Gparted instead of OS X's Disk Utility (at this point, I don't recall whether I used Gparted or Disk Utility). In any case, it doesn't seem safe to do any reformatting with Disk Utility now, as I'm afraid it will wipe sda2 ("Macintosh HD") as well as sda4 (my Linux partition). So... I'm hoping to find a solution that doesn't involve wiping my entire hard disk. Would it be safe/possible to use Gparted to erase sda2 ("Macintosh HD") and then use the Snow Leopard DVD to install OS X onto [I]just[/I] sda2 without touching the other partitions? Thanks for any insight!

  Read the article

• Docs for auto-generated methods in Ruby on Rails

  - by macek

  Rails has all sorts of auto-generated methods that I've often times struggled to find documentation for. For example, in routes.rb, if I have: map.resources :projects do |p| p.resources :tasks end This will get a plethora of auto-generate path and url helpers. Where can I find documentation for how to work with these paths? I generally understand how to work with them, but more explicit docs might help me understand some of the magic that happens behind the scenes. # compare project_path(@project) project_task_path(@project, @task) # to project_path(:id => @project.id) project_task_path(:project_id => @project.id, :id => @task.id) Also, when I change an attribute on a model, @post.foo_changed? will be true. Where can I find documentation for this and all other magical methods that are created like this? If the magic is there, I'd love to take advantage of it. And finally: Is there a complete resource for config.___ statements for environment.rb? I was able to find docs for Configuration#gem but what attributes can I set within the stubs like config.active_record.___, config.action_mailer.___, config.action_controller.___, etc. Again, I'm looking for a complete resource here, not just a settings for the examples I provided. Even if you can only answer one of these questions, please chime in. These things seem to have been hiding from me and it's my goal to get them some more exposure, so I'll be upvoting all links to docs that point me to what I'm looking for. Thanks! ps, If they're not called auto-generated methods, I apologize. Someone can teach me a lesson here, too :) Edit I'm not looking for tutorials here, folks. I have a fair amount of experience with rails; I'm just looking for complete docs. E.g., I understand how routing works, I just want docs where I can read about all of the usage options.

  Read the article

• Have I fixed my partition problem with os x 10.5.8? Are my GPT and MBR back to normal?

  - by David Schaap

  I'm new to linux and I have overstepped by abilities. I tried dual booting os x 10.5.8 with ubuntu 11.10 with rEFIt, but I been having problems with partitioning. Instead of enduring more headaches, I've made the decision to simply use ubuntu on VirtualBox. I've tried to return my HDD to normal, but I am looking for confirmation that my partitions are ok. Here is the report from partition inspector: *** Report for internal hard disk *** Current GPT partition table: # Start LBA End LBA Type 1 409640 233917359 Mac OS X HFS+ Current MBR partition table: # A Start LBA End LBA Type 1 1 234441647 ee EFI Protective MBR contents: Boot Code: GRUB Partition at LBA 409640: Boot Code: None File System: HFS Extended (HFS+) Listed in GPT as partition 1, type Mac OS X HFS+ Also, my HDD directory has a bunch of extra folders in them and they appear to be ubuntu related, although it is no longer installed. folders like bin, sbin, cores, var, user, and so on. Those folders aren't supposed to be there, right? Thanks in advance.

  Read the article

• Is it perfectly safe to install grub bootloader on regular partition?

  - by Flint

  One of the methods to do dual booting Windows with Linux OS is by installing grub boot loader onto Linux partition so you can retain Windows boot loader and let Windows handles the dual booting process. What's the odd that grub bootloader could partially overwrite the data at the beginning of the Linux partition and corrupt the file? Does grub actually check if there's a data at the beginning of the partition and move it to other location on the partition before writing its bootloader?

  Read the article

• Eliminating Magic Numbers: When is it time to say "No"?

  - by oosterwal

  We're all aware that magic numbers (hard-coded values) can wreak havoc in your program, especially when it's time to modify a section of code that has no comments, but where do you draw the line? For instance, if you have a function that calculates the number of seconds between two days, do you replace seconds = num_days * 24 * 60 * 60 with seconds = num_days * HOURS_PER_DAY * MINUTES_PER_HOUR * SECONDS_PER_MINUTE At what point do you decide that it is completely obvious what the hard-coded value means and leave it alone?

  Read the article

• Why does Ubuntu 13.10 not detect my Win7 partition?

  - by goutham

  I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

  Read the article

• Partition tool with console UI (as in server installation)?

  - by lepe

  Back in 2006, Ray (3DLover) posted the same question in: http://ubuntuforums.org/showthread.php?t=309680 but none of the answers were really useful. Now with a little help from AskUbuntu community, I would like to repeat his question again to see if this time it can be answered correctly. So this is the question (and what I wish too): I'm looking for a UI tool for managing partitions in a console. I have installed Ubuntu Server, so I don't have X Windows at all. fdisk and sfdisk are entirely command line. parted is slightly better, but it's not really a UI. cfdisk has somewhat of a UI, but it only works on one disk at a time, and there's no advanced options like configuring LVM or RAID. Just partitioning. I love the partition tool that is available during the OS install procedure. You can partition, configure RAID's and LMV sets. It can format the partitions with several different file systems, it can set labels, mount options and it can insert your volumes into your fstab. Is this tool available as a stand-alone program? I can't find it anywhere. I think it's called parted_server, but I can't find much information about where to get it. In the past, I have run the Ubuntu install procedure just to use the partition manager that comes with it. (canceling the install after making my partition edits) Anyone help me on this? Thanks -Ray Thanks in advance.

  Read the article

• Increase Shrink Space in Windows-7

  - by metdos

  I want to shrink my disc, but even though I newly bought my computer it allows very restricted area to shrink. How can I increase shrinkable area? Thanks.

  Read the article

• Failed MDADM Array With Ext.4 Partition - "e2fsck: unable to set superblock flags on /dev/md0"

  - by Matthew Hodgkins

  Had a power failure and now my mdadm array is having problems. sudo mdadm -D /dev/md0 [hodge@hodge-fs ~]$ sudo mdadm -D /dev/md0 /dev/md0: Version : 0.90 Creation Time : Sun Apr 25 01:39:25 2010 Raid Level : raid5 Array Size : 8790815232 (8383.57 GiB 9001.79 GB) Used Dev Size : 1465135872 (1397.26 GiB 1500.30 GB) Raid Devices : 7 Total Devices : 7 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Sat Aug 7 19:10:28 2010 State : clean, degraded, recovering Active Devices : 6 Working Devices : 7 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 128K Rebuild Status : 10% complete UUID : 44a8f730:b9bea6ea:3a28392c:12b22235 (local to host hodge-fs) Events : 0.1307608 Number Major Minor RaidDevice State 0 8 81 0 active sync /dev/sdf1 1 8 97 1 active sync /dev/sdg1 2 8 113 2 active sync /dev/sdh1 3 8 65 3 active sync /dev/sde1 4 8 49 4 active sync /dev/sdd1 7 8 33 5 spare rebuilding /dev/sdc1 6 8 16 6 active sync /dev/sdb sudo mount -a [hodge@hodge-fs ~]$ sudo mount -a mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so sudo fsck.ext4 /dev/md0 [hodge@hodge-fs ~]$ sudo fsck.ext4 /dev/md0 e2fsck 1.41.12 (17-May-2010) fsck.ext4: Group descriptors look bad... trying backup blocks... /dev/md0: recovering journal fsck.ext4: unable to set superblock flags on /dev/md0 sudo dumpe2fs /dev/md0 | grep -i superblock [hodge@hodge-fs ~]$ sudo dumpe2fs /dev/md0 | grep -i superblock dumpe2fs 1.41.12 (17-May-2010) Primary superblock at 0, Group descriptors at 1-524 Backup superblock at 32768, Group descriptors at 32769-33292 Backup superblock at 98304, Group descriptors at 98305-98828 Backup superblock at 163840, Group descriptors at 163841-164364 Backup superblock at 229376, Group descriptors at 229377-229900 Backup superblock at 294912, Group descriptors at 294913-295436 Backup superblock at 819200, Group descriptors at 819201-819724 Backup superblock at 884736, Group descriptors at 884737-885260 Backup superblock at 1605632, Group descriptors at 1605633-1606156 Backup superblock at 2654208, Group descriptors at 2654209-2654732 Backup superblock at 4096000, Group descriptors at 4096001-4096524 Backup superblock at 7962624, Group descriptors at 7962625-7963148 Backup superblock at 11239424, Group descriptors at 11239425-11239948 Backup superblock at 20480000, Group descriptors at 20480001-20480524 Backup superblock at 23887872, Group descriptors at 23887873-23888396 Backup superblock at 71663616, Group descriptors at 71663617-71664140 Backup superblock at 78675968, Group descriptors at 78675969-78676492 Backup superblock at 102400000, Group descriptors at 102400001-102400524 Backup superblock at 214990848, Group descriptors at 214990849-214991372 Backup superblock at 512000000, Group descriptors at 512000001-512000524 Backup superblock at 550731776, Group descriptors at 550731777-550732300 Backup superblock at 644972544, Group descriptors at 644972545-644973068 Backup superblock at 1934917632, Group descriptors at 1934917633-1934918156 sudo e2fsck -b 32768 /dev/md0 [hodge@hodge-fs ~]$ sudo e2fsck -b 32768 /dev/md0 e2fsck 1.41.12 (17-May-2010) /dev/md0: recovering journal e2fsck: unable to set superblock flags on /dev/md0 sudo dmesg | tail [hodge@hodge-fs ~]$ sudo dmesg | tail EXT4-fs (md0): ext4_check_descriptors: Checksum for group 0 failed (59837!=29115) EXT4-fs (md0): group descriptors corrupted! EXT4-fs (md0): ext4_check_descriptors: Checksum for group 0 failed (59837!=29115) EXT4-fs (md0): group descriptors corrupted! Please Help!!!

  Read the article

• Missing partition on a single HDD

  - by r0ca

  Hi all, I reinstalled Windows XP over a windows 7 Ultimate. I have a SATA HDD (320go) and now that I installed Windows XP pro, I only see a C:\ drive with 130go. So basically, my 2 other partitions are gone... where?!?! In my computer I only see the C:\ drive. In Computer Management, I only see Disk0 as my C:\ drive. 130go still. Is there an apps that can recover my 2 "lost" partitions or I would need to perform something else? Thanks! David.

  Read the article

• Gnome-mount alternative in Ubuntu 10.04 or how to mount partition with normal user rights

  - by easyrider

  Hi, i was using gnome-mount to automount drives but in lucid it was removed. So is there any alternatives in lucid except editing fstab and programs that do so? Gnome-mount is a program which mounts disks using the same facilities as when mounting a disk as a normal user through Nautilus. There is no need to setup mountpoints or filesystems. This is particularly interesting if you want to use the automatically created mountpoints instead of manually specifying them for each disk.

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >