Search Results

Search found 1620 results on 65 pages for 'proc'.

Page 41/65 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• How do I measure performance of a virtual server?

  - by Sergey

  I've got a VPS running Ubuntu. Being a virtual server, I understand that it shares resources with unknown number of other servers, and I'm noticing that it's considerably slower than my desktop machine. Is there some tool to measure the performance of the virtual machine? I'd be curious to see some approximate measure similar to bogomips, possibly for CPU (operations/sec), memory and disk read/write speed. I'd like to be able to compare those numbers to my desktop machine. I'm not interested in the specs of the actual physical machine my VPS is running on - by doing cat /proc/cpuinfo I can see that it's a nice quad-core Xeon machine, but it doesn't matter to me. I'm basically interested in how fast a program would run in my VPS - how many CPU operations it can make in a second, how many bytes to write to RAM or to disk. I only have ssh access to the machine so the tool need to be command-line. I could write a script which, say, does some calculations in a loop for a second and counts how many loops it was able to do, or something similar to measure disk and RAM performance. But I'm sure something like this already exists.

  Read the article

• Running 64 bit Ubuntu distribution from 32 bit Ubuntu

  - by csg

  Related to this question How do I run qemu with 64bit processor on a 64bit machine?, I'm trying to run latest ubuntu 11.10 64bit distribution under Ubuntu 11.04 32 bit using qemu on a core2duo (64 bit cpu) machine, using following qemu parameters with no success. Error under qemu: "This kernel required an x86-64 CPU, but only detected an i686 CPU. Unable to boot - please use a kernel appropiate for your CPU" Isn't qemu suppose to emulate a 64 bit machine? I think I'm missing something, but I can't figure it out. qemu -cpu (kvm64|core2duo|qemu64) -boot d -cdrom ubuntu-11.10-desktop-amd64.iso qemu-system-x86_64 -boot d -cdrom ubuntu-11.10-desktop-amd64.iso Here is my uname -m i686 Here is my /proc/cpuinfo processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping : 6 cpu MHz : 800.000 cache size : 3072 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 4522.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

  Read the article

• sudo dhclient eth0 | sudo: unable to resolve host ubuntu

  - by Merianos Nikos

  I have a computer of a friend of mine, that runs Ubuntu (I don't know what version, due to the current system status) and while he was updating the kernel, he reboot the computer (yes that could be happen !!, anyway) Currently I am trying to recover the system by using a live USB, with Ubuntu installed on it. What I am doing, is the following: Update Failure The problem is that when I try to execute the fifth step, I am getting error because I do not have Internet access. The computer is properly wired on my rooter, and I have Internet access in any place apart of the shell. This message for example is send it via the live USB. but I cannot access the Internet via the shell. In my shell I try to use this command: sudo dhclient eth0 but the result of this command is the following message sudo: unable to resolve host ubuntu My hosts file has the following content: 127.0.0.1 localhost 127.0.1.1 ubuntu # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts how can I get connected on the Internet, in order to download the appropriate updates ? UPDATE 1 I just notice, that when I execute the ifconfig I am getting the following warning: Warning: cannot open /proc/net/dev (No such file or directory). Limited output. UPDATE 2 I just found that, and looks like solving the problem with dhclient eth0 command, but still I cannot ping Google UPDATE 3 Now the sudo dhclient eth0 returns the following message: RTNETLINK answers: File exists UPDATE 4 I just ping my rooter and I getting response, so, it is looks like I cannot ping outside the rooter (ie. Google) Kind regards ...

  Read the article

• OBJECT_Name parameters and dbid

  - by steveh99999

  If you've been using SQL Server for a long time, you may have been used to using the OBJECT_NAME system function in the past - especially useful when converting table IDs into table names when querying sysobjects and sysindexes..... However, if you're an old-school DBA  - did you know since SQL 2005 service pack 2 it  accepts a  second parameter ? database_id.. For example, this can be used to summarize some useful information from sys.dm_exec_query_stats. When reviewing SQL Server performance - it can be useful to look at the most heavily used stored procedures rather than inefficient less frequently used procedures.  Here's a query to summarize performance data on the most-heavily used stored procedures across all databases on a server  :-SELECT TOP 20 DENSE_RANK() OVER (ORDER BY SUM(execution_count) DESC) AS rank, OBJECT_NAME(qt.objectid, qt.dbid) AS 'proc name', (CASE WHEN qt.dbid = 32767 THEN 'mssqlresource' ELSE DB_NAME(qt.dbid) END ) AS 'Database', OBJECT_SCHEMA_NAME(qt.objectid,qt.dbid) AS 'schema', SUM(execution_count) AS 'TotalExecutions',SUM(total_worker_time) AS 'TotalCPUTimeMS', SUM(total_elapsed_time) AS 'TotalRunTimeMS', SUM(total_logical_reads) AS 'TotalLogicalReads',SUM(total_logical_writes) AS 'TotalLogicalWrites', MIN(creation_time) AS 'earliestPlan', MAX(last_execution_time) AS 'lastExecutionTime' FROM sys.dm_exec_query_stats qs CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt WHERE OBJECT_NAME(qt.objectid, qt.dbid) IS NOT NULL GROUP BY OBJECT_NAME(qt.objectid, qt.dbid),qt.dbid,OBJECT_SCHEMA_NAME(qt.objectid,qt.dbid)      

  Read the article

• How can I install Insight debugger?

  - by DandyWalker

  Hello. I am following along a book in which Insight debugger is required. I didn't find it on my Maverick. I googled and I found that it's not supported in debian anymore but I really need to install it. I tried to compile the source and it installed but keep telling me that tk is missing whenever i start it. I installed tk with sudo aptitude install tk then tried to run again it's the same. I compiled it one more time and nothing really changes. So please how can I install that ? Update: This is the message i get Tk_Init failed: Can't find a usable tk.tcl in the following directories: /usr/local/share/tk8.4 /usr/local/lib/tk8.4 /usr/lib/tk8.4 /usr/local/library /usr/library /usr/tk8.4.1/library /tk8.4.1/library /usr/local/share/tk8.4/tk.tcl: no event type or button # or keysym no event type or button # or keysym while executing "bind Listbox <MouseWheel> { %W yview scroll [expr {- (%D / 120) * 4}] units }" (file "/usr/local/share/tk8.4/listbox.tcl" line 182) invoked from within "source /usr/local/share/tk8.4/listbox.tcl" (in namespace eval "::" script line 1) invoked from within "namespace eval :: [list source [file join $::tk_library $file.tcl]]" (procedure "SourceLibFile" line 2) invoked from within "SourceLibFile listbox" (in namespace eval "::tk" script line 4) invoked from within "namespace eval ::tk { SourceLibFile button SourceLibFile entry SourceLibFile listbox SourceLibFile menu SourceLibFile panedwindow SourceLibFile ..." invoked from within "if {$::tk_library ne ""} { if {[string equal $tcl_platform(platform) "macintosh"]} { proc ::tk::SourceLibFile {file} { if {[catch { namesp..." (file "/usr/local/share/tk8.4/tk.tcl" line 393) invoked from within "source /usr/local/share/tk8.4/tk.tcl" ("uplevel" body line 1) invoked from within "uplevel #0 [list source $file]" This probably means that tk wasn't installed properly.

  Read the article

• Update to kernel 3.12 seems to fail: uname reports old rc7

  - by carlo

  I currently run Xubuntu 13.10 with kernel 3.12 rc7. Today I tried updating to the latest 3.12 kernel (non-rc), but this seems to fail. When installing the image and headers I see the following error passing by: ... run-parts: executing /etc/kernel/postinst.d/dkms 3.12.0-031200-generic /boot/vmlinuz-3.12.0-031200-generichis Error! The dkms.conf for this module includes a BUILD_EXCLUSIVE directive which does not match this kernel/arch. This indicates that it should not be built. ... After rebooting, when I do uname -r or cat /proc/version it tells me that I'm still running on the old rc7 kernel. Since my microphone wasn't working on my Sony Vaio Pro 13 I did download and install the latest ALSA drivers using the oem-audio-hda-daily-dkms package which seem to fix the problem (with the mic). Maybe this has something to do with it? I also tried removing the package using sudo apt-get purge oem-audio-hda-daily-dkms but no success.

  Read the article

• Laptop drains of quickly with battery

  - by Shyam

  I am a user since years in ubuntu and I have not come across this problem with ubuntu till date. My battery drains off immediately after I unplug my AC power. The options I tried: 1) checked the battery state with : cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charged present rate: 0 mA remaining capacity: 392 mAh present voltage: 12476 mV Initially it was showing charging state: charging after 5mins it started displaying as charged. ! Based on that if I remove my AC Power it shows low battery notification. 2) When I run acpi : acpi -b Battery 0: Unknown, 9% The battery state shows as unknown. But initially when we plug-in to AC adapter acpi -b Battery 0: Charging, 9%, 13:04:00 until charged 3) When the check the same with : upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0A:00/power_supply/BAT0 vendor: HP power supply: yes updated: Thu Nov 1 16:06:40 2012 (20 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 4.2336 Wh energy-empty: 0 Wh energy-full: 33.1128 Wh energy-full-design: 33.1128 Wh energy-rate: 5.6052 W voltage: 12.474 V time to full: 5.2 hours percentage: 12.7854% capacity: 100% technology: lithium-ion Is the power stats output, It says 5hrs to charge completely, If I charge it even more than 5hrs and unplug the AC power, It again cribs stating LOW BATTERY !! The same thing does not happen with Windows7. Any suggestions/ help will be greatly appreciated.

  Read the article

• My processor is not detected intel core 2 duo

  - by walid

  My processor is not detected intel core 2 duo When I type $uname -m -p I get this i686 unknown I have Ubuntu 10.10 netbook remix but the cat /proc/cpuinfo gives right identification of two processors as below processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.99 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.53 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: The problem is with programs that uses more than one core like virtualbox and bitcoin which refuses to use more than one core Is there anythign wrong or anything that I can do? My installation is from a live usb iso on a USB

  Read the article

• Issues with forwarding Iptables

  - by Ricardo Rios

  I have some issues with my redirectioning lines on iptables, it seems it does not work, any help will be appreciated iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j SNAT --to 10.10.10.1 iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j DNAT --to 10.10.10.1:8080 iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 8080 iptables -t nat -A PREROUTING -d 200.59.189.125 -p tcp --dport 8081 -j DNAT --to 192.168.2.51:8081 iptables -t nat -A PREROUTING -d 200.59.189.125 -p tcp --dport 34551 -j DNAT --to 192.168.2.51:8081 iptables -t nat -A PREROUTING -d 200.59.189.125 -p tcp --dport 8082 -j DNAT --to 192.168.2.52:8082 iptables -t nat -A PREROUTING -d 200.59.189.125 -p tcp --dport 34552 -j DNAT --to 192.168.2.52:8082 iptables -t nat -A PREROUTING -d 200.59.189.125 -p tcp --dport 8083 -j DNAT --to 192.168.2.53:8083 iptables -t nat -A PREROUTING -d 200.59.189.125 -p tcp --dport 34553 -j DNAT --to 192.168.2.53:8083 iptables -t nat -A PREROUTING -d 200.59.189.125 -p tcp --dport 8084 -j DNAT --to 192.168.2.54:8084 iptables -t nat -A PREROUTING -d 200.59.189.125 -p tcp --dport 34554 -j DNAT --to 192.168.2.54:8084 iptables -t nat -A PREROUTING -d 200.59.189.125 -p tcp --dport 8085 -j DNAT --to 192.168.2.55:8085 iptables -t nat -A PREROUTING -d 200.59.189.125 -p tcp --dport 34555 -j DNAT --to 192.168.2.55:80 echo Ejecutadas Reglas del Firewall

  Read the article

• Why does my system use so much cache?

  - by Dave M G

  Previously, on my desktop computer running Ubuntu 14.04, I had 4GB RAM, which I thought should be plenty. However, after being on for a while, my computer would seem to get slow. I have a system resource monitor app in my Gnome panel, which I assume represents the available RAM (?). It shows a dark green area as being "Memory", and a light green area as "Cache". The "Cache" would slowly grow until it filled the whole graph, and then programs would get slow to load, or it would take a while to switch programs. I could alleviate the problem somewhat with this command, but eventually the computer cache fills up again, so it's only a bandaid: sudo sh -c "sync; echo 3 > /proc/sys/vm/drop_caches" So, I figured I'd get more RAM, so I replaced one 2GB stick with an 8GB stick, and now I have 10 GB ram. And my "cache" still slowly maxes out and my computer slows as a result. Also, sometimes the computer starts out with "cache" maxed when I first boot and log in. Not always though, I don't know if there's a pattern that determines why it happens. Why is Ubuntu using up so much cache? Is 10GB not enough for Ubuntu? Here's what my system monitor looks like in my Gnome panel. The middle square shows RAM usage. The light green area is the "cache": This is my memory and swap history, which doesn't seem to include any information about "cache". I realize at this point I'm not totally clear on the difference between "cache" and "swap":

  Read the article

• Reboot failure after upgrade from 8.04 LTS to 10.04 LTS

  - by Alan Fietz

  I bought our computer from Freegeeks with Ubuntu 8.04 installed. I upgraded from Ubuntu 8.04 to 10.04 on Thursday November 10. I have an ASUS P4P800SE with dual Intel P4@3GHZ. Installation messages were: - Error loading Nautilus config info - Replaced customied /etc/login.defs - Replaced customized /etc/dhcp3/dhclient.conf - 189 packages removed - WARNING: Failed to read mirror file When I rebooted, the usual ASUS screen appeared, then "Loading GRUB" then "starting Up..." then "starting Up..." again then a blank screen (the moniter went dormant). I rebooted, started GRUB and selected: version 10.04.3 LTS kernel 2.6.32-35 generic I got the same results. I rebooted, started GRUB and selected: kernel 2.6.24-29 generic Here's what was displayed: udevd [875]: error getting socket: Invalid argument libudev:udev_monitor_new_from_netlink: error getting socket: Invalid argument Segmentation fault **Gave up waiting for root device** Common problems - Boot args (cat/proc/cmdline) - Check root delay - check root - Missing modules (cat/pro/modules; **Alert! /dev/disk/by_vvid/c59c6361 etc... does not exist. Dropping to a shell.** Then Busybox v1.13.3 started with the following prompt (?) (initramfs) _ But my typing did not appear on the screen. It appears the hard drive cannot be found. Any suggestion on how to remedy this? Thank you.

  Read the article

• Ubuntu 12.04 LTS 32bit does not detect 4Gb ram

  - by David

  I have recently installed 4Gb of ram for an existing 12.04 32bit Ubuntu. It's not being recognised, only 3.2Gb is showing, See: administrator@Root2:~$ free total used free shared buffers cached Mem: 3355256 1251112 2104144 0 48664 391972 -/+ buffers/cache: 810476 2544780 System is PAE capable, See: administrator@Root2:~$ grep --color=always -i PAE /proc/cpuinfo flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts The system us fully patched and tried to run manual PAE upgrade, See: administrator@Root2:~$ sudo apt-get install linux-generic-pae linux-headers-generic-pae [sudo] password for administrator: Reading package lists... Done Building dependency tree Reading state information... Done linux-generic-pae is already the newest version. linux-headers-generic-pae is already the newest version. The following packages were automatically installed and are no longer required: language-pack-zh-hans language-pack-kde-en language-pack-kde-zh-hans language-pack-kde-en-base kde-l10n-engb kde-l10n-zhcn language-pack-zh-hans-base firefox-locale-zh-hans language-pack-kde-zh-hans-base Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I am not sure what else to try to recognise the full physical memory installed other than loading 64bit. Any thoughts? Thanks! output of uname -r administrator@Root2:~$ uname -r 3.2.0-24-generic-pae

  Read the article

• how to troubleshoot sql server issues

  - by joe

  i have an ASP .net application with sql server database, and i am wondering if you can give your ideas on how to troubleshoot the following issue: i can insert / update / delete from any table, but i have one page that uses transactions to insert into different tables. the c# code is correct and very simple, but it fails. i used the sql profiler to see how my app interacts with the DB, especially that the app is using stored procedures, i can catch the exec procedure statement and run it manually from SSMS and it works fine, but the same stored procedure fails from the application!!! which lead me to think that issue is coming from the user account and settings, i am no expert in sql server and wondering if anyone can explain how to verify the required settings for user account. thanks EDIT: in web.config here is how i reference my connection <connectionStrings> <add name="Conn" connectionString="Data Source=localhost;Initial Catalog=myDB;Persist Security Info=True;User ID=DbUser;Password=password1254_3" providerName="System.Data.SqlClient"> </connectionstring> EDIT: i will try to describe the process here: 1- i begin a transaction 2- i call a stored proc to insert (which succeeds) and return the scope identity ( that will be used in the next step) 3- i call another stored procedure to insert some more info + scope identity from step 2, which is a foreign key here 4- i get error, foreign key violation 5- transaction rolled back, now tables empty again... thanks

  Read the article

• Why does 'top' say my machine is only 50% idle?

  - by Chris Moore

  What's going on here? I'm running nothing on the system, iotop and iftop show the network and hard drive are both idle, and top (sorted by %CPU) shows nothing running. So why is the system only 50% idle? What's the other 50% waiting for? How can I find out? top - 12:01:05 up 3 days, 15:03, 1 user, load average: 6.00, 6.01, 6.05 Tasks: 179 total, 1 running, 178 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.0%sy, 0.0%ni, 49.7%id, 49.7%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2053996k total, 1992600k used, 61396k free, 81680k buffers Swap: 4092924k total, 10740k used, 4082184k free, 1338636k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1042 deb 20 0 21468 1412 1000 R 1 0.1 0:00.03 top 1 root 20 0 24188 1952 1152 S 0 0.1 0:01.44 init 2 root 20 0 0 0 0 S 0 0.0 0:00.05 kthreadd Update: dmesg shows the printer driver misbehaving: [28858.561847] cnijnetprn[1503]: segfault at 29 ip 00007f56cf3480f7 sp 00007fffb964ec30 error 4 in libcnnet.so.1.2.0[7f56cf345000+9000] [68851.187802] cnijnetprn[9180]: segfault at 29 ip 00007ffe7636a0f7 sp 00007fff9a8b1990 error 4 in libcnnet.so.1.2.0[7ffe76367000+9000] [155412.107826] cnijnetprn[19966]: segfault at 29 ip 00007fc31de770f7 sp 00007fffc03aa8e0 error 4 in libcnnet.so.1.2.0[7fc31de74000+9000] and also some issue with cp: [248041.172067] INFO: task cp:27488 blocked for more than 120 seconds. [248041.172071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [248041.172075] cp D ffffffff81805120 0 27488 27345 0x00000004 [248041.172080] ffff880078d57a38 0000000000000046 ffff880078d579d8 ffffffff81032a79 [248041.172085] ffff880078d57fd8 ffff880078d57fd8 ffff880078d57fd8 0000000000012a40 [248041.172090] ffff88007b818000 ffff880069acc560 ffff880078d57a18 ffff88007f8532c0 [248041.172095] Call Trace: [248041.172104] [<ffffffff81032a79>] ? default_spin_lock_flags+0x9/0x10 [248041.172109] [<ffffffff8110a360>] ? __lock_page+0x70/0x70 [248041.172114] [<ffffffff815f0ecf>] schedule+0x3f/0x60 I did try copying something to the USB stick that's plugged into the router and mounted onto this computer using mount.cifs. That almost always causes everything to lock up, so I'm guessing that's the problem. I'll reboot and stop using mount.cifs.

  Read the article

• Swap drive not operating correctly

  - by Blue Ice

  At first, I started seeing the warning signs. The halting pages. The molasses speed of the windows closing. The pictures not rendering. Then, I took action. Recently I added a swap drive to my computer. For a while, everything was good. Unicorns frolicked among the new bits and bytes resplendent on the shiny metal platter known as my swap drive. Today, I opened Chromium, and got on the 7th tab (start.csail.mit.edu) "He's dead, Jim!". This used to happen before I added my swap drive, but now I thought that it wouldn't happen because I added more memory. I fear for the safety of the unicorns. Please help me make my swap drive work again. As a side note, here is the result of cat /proc/swaps: Filename Type Size Used Priority /dev/sda5 partition 39075836 213896 -1 Result of free: total used free shared buffers cached Mem: 507472 330792 176680 0 6208 71252 -/+ buffers/cache: 253332 254140 Result of df -h: Filesystem Size Used Avail Use% Mounted on /dev/sdb1 147G 8.9G 130G 7% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 240M 12K 240M 1% /dev tmpfs 50M 824K 49M 2% /run none 5.0M 0 5.0M 0% /run/lock none 248M 208K 248M 1% /run/shm none 100M 20K 100M 1% /run/user

  Read the article

• Laptop battery life drastically decreased compared to Windows 7

  - by Aron Rotteveel

  I am running Ubuntu 10.10 on my Dell Studio XPS 1640 and have about one hour of battery life in it, compared to about 2.5 hours running on Windows 7. This is with wireless and bluetooth on, but still, the difference seems incredible. What could be causing such a difference and is there a way to close the gap without losing core functionality? EDIT: here's some output from powertop. This is with bluetooth turned off and Wifi turned on. The output seems pretty normal to me, but as indicated, this is about 1 hour of battery life on a full battery... Wakeups-from-idle per second : 476.2 interval: 10.0s Power usage (ACPI estimate): 2.5W (1.2 hours) Top causes for wakeups: 30.0% (167.2)D chrome 21.0% (117.3) [extra timer interrupt] 13.9% ( 77.4) [kernel scheduler] Load balancing tick 3.4% ( 18.9)D xchat 7.1% ( 39.8) [iwlagn] <interrupt> 5.9% ( 32.9) AptanaStudio3 3.9% ( 21.6)D java 2.7% ( 14.9) [TLB shootdowns] <kernel IPI> 2.5% ( 14.1) docky 1.8% ( 10.0) nautilus 1.6% ( 9.0) thunderbird-bin 1.0% ( 5.5) [ahci] <interrupt> 0.9% ( 5.0) syndaemon 0.8% ( 4.3) [kernel core] hrtimer_start (tick_sched_timer) EDIT: after changing /proc/sys/vm/laptop_mode to 5 (it was set to 0), wakeups seem to have decreased, although usage still seems far too high: Wakeups-from-idle per second : 263.8 interval: 10.0s Power usage (ACPI estimate): 2.6W (0.9 hours) EDIT: I seem to have discovered the main cause: I was using the open source ATI Drivers. I recently installed the official ATI drivers and laptop battery life seems to have doubled since. EDIT: last edit. The previous 'solution' of installing the official ATI drivers turns out to be a non-solution. Although it does increase battery life, my laptop resolution is maxed out at 1200x800 after a reboot. (Please note that this problem does not need answering in this question as it is a seperate case)

  Read the article

• Internal Mic not working on Dell Adamo 13

  - by AFD

  So I'm using Elementary Luna Beta (based on Ubuntu 12.04 LTS) on a spare HDD after successfully using Jupiter release (based on 10.10) for many years. In Jupiter I had my internal mic work out of the box and with Skype installed from deb it was all setup without having to step foot inside the terminal. In Luna Beta the internal mic is not recognised by the OS and so also not recognised by Skype. I believe the hardware is this (from sudo lshw): *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:46 memory:f8600000-f8603fff As well as this I ran cat /proc/asound/card0/codec* | grep Codec which gave me: Codec: IDT 92HD73C1X5 Codec: Intel Cantiga HDMI How do I tweak Luna to get this hardware working properly? I'm able to switch out my Luna HDD with the Jupiter HDD to help troubleshoot what the differences are between the two and why the more recent OS can't find / use the mic correctly. Thanks in advance for any help you can give.

  Read the article

• Disk Space Full

  - by Loki

  Setting up Ubuntu 10.04 server, the / disk space shows full under df, however the du does not show any of the space used. This has several mounts to Gluster FS'. I have tried a forced FSCK and to no avail. ~# df -h Filesystem Size Used Avail Use% Mounted on /dev/md0 141G 132G 0 100% / none 3.0G 224K 3.0G 1% /dev none 3.0G 0 3.0G 0% /dev/shm none 3.0G 76K 3.0G 1% /var/run none 3.0G 0 3.0G 0% /var/lock none 3.0G 0 3.0G 0% /lib/init/rw /dev/sdb1 9.0T 7.1T 1.9T 80% /brick1 /dev/sdb2 9.0T 7.9T 1.1T 88% /brick2 localhost:/sanvol09 385T 330T 56T 86% /mnt/sanvol09 <- Gluster FS uses local software to contact the DFS I've attempted a tune2fs and same issue arises # du -h --max-depth=1 --one-file-system / 4.0K /selinux 0 /proc 47M /boot 31M /mnt 8.0K /brick1 8.0K /brick2 391M /lib 4.0K /opt 7.4M /bin 0 /sys 379M /var 5.6M /etc 16K /lost+found 43M /root 4.0K /srv 5.7M /home 4.0K /media 7.0M /sbin 0 /dev 4.0K /tmp 4.0K /cdrom 631M /usr 1.6G / more info # df -ih Filesystem Inodes IUsed IFree IUse% Mounted on /dev/md0 9.0M 91K 8.9M 1% / none 746K 770 745K 1% /dev none 747K 1 747K 1% /dev/shm none 747K 32 747K 1% /var/run none 747K 1 747K 1% /var/lock none 747K 3 747K 1% /lib/init/rw /dev/sdb1 583M 1.8M 581M 1% /brick1 /dev/sdb2 583M 1.9M 581M 1% /brick2 localhost:/sanvol09 25G 76M 25G 1% /mnt/sanvol09 The final question: df show's 100% used, and its not, any other known fixes?

  Read the article

• No boot or grub file after using ls command

  - by Poke Moke

  I had xubuntu installed, i believe version 12.04 and then tried to dual boot with backbox. It worked from the flash drive but upon installing it onto the hard drive, I could no longer boot backbox. I decided I would just clear my OS and put just backbox on the hard drive and only have a single boot. To do this, I erased my boot file completely which led to my current position. I am put into the grub rescue prompt. I can't do a system restore, I can't boot with anything I might try including puppy linux and a boot rescue, and I've looked up the commands and I've tried to fix this. I can do ls, I find the correct hd but then I'm stuck as I don't have a boot or grub folder. The command is typed as: ls (hd1,msdos1)/ and listed is ./ ../ lost+found/ etc/ media/ bin/ dev/ home/ lib/ mnt/ opt/ proc/ root/ run/ sbin/ selinux/ srv/ sys/ tmp/ usr/ var/ initrd.img vmlinuz cdrom/ apfolder initrd.img.old vmlinuz.old (not sure if it's initrd or init rd.img. as it wraps around the screen there.) I've seen commands regarding boot or grub if they are seen but as listed, they aren't there. Any ideas?

  Read the article

• Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

  - by Schof

  This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

  Read the article

• CUDA & MSI GT60 with Optimus enabled GTX670M?

  - by user1076693

  I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

  Read the article

• Ubuntu server 11.04 recognize only 1 core instead of 4

  - by Kreker

  I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

  Read the article

• How to re-add RAID-10 dropped drive?

  - by thiesdiggity

  I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm --manage --re-add /dev/md2 /dev/sdc1 I get the following error message: mdadm: Cannot open /dev/sdc1: Device or resource busy When I do a "cat /proc/mdstat" I get the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [r$ md2 : active raid10 sdb1[0] sdd1[3] 1953519872 blocks 64K chunks 2 near-copies [4/2] [U__U] md1 : active raid1 sda2[0] sdc2[1] 468853696 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[1] 19530688 blocks [2/2] [UU] unused devices: <none> When I run "/sbin/mdadm --detail /dev/md2" I get the following: /dev/md2: Version : 00.90 Creation Time : Mon Sep 5 23:41:13 2011 Raid Level : raid10 Array Size : 1953519872 (1863.02 GiB 2000.40 GB) Used Dev Size : 976759936 (931.51 GiB 1000.20 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Oct 25 09:25:08 2012 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : c6d87d27:aeefcb2e:d4453e2e:0b7266cb Events : 0.6688691 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed 2 0 0 2 removed 3 8 49 3 active sync /dev/sdd1 Output of df -h is: Filesystem Size Used Avail Use% Mounted on /dev/md1 441G 2.0G 416G 1% / none 32G 236K 32G 1% /dev tmpfs 32G 0 32G 0% /dev/shm none 32G 112K 32G 1% /var/run none 32G 0 32G 0% /var/lock none 32G 0 32G 0% /lib/init/rw tmpfs 64G 215M 63G 1% /mnt/vmware none 441G 2.0G 416G 1% /var/lib/ureadahead/debugfs /dev/mapper/RAID10VG-RAID10LV 1.8T 139G 1.6T 8% /mnt/RAID10 When I do a "fdisk -l" I can see all the drives needed for the RAID-10. The RAID-10 is part of the /dev/mapper, could that be the reason why the device is coming back as busy? Anyone have any suggestions on what I can try to get the drives back into the array? Any help would be greatly appreciated. Thanks!

  Read the article

• Languages like Tcl that have configurable syntax?

  - by boost

  I'm looking for a language that will let me do what I could do with Clipper years ago, and which I can do with Tcl, namely add functionality in a way other than just adding functions. For example in Clipper/(x)Harbour there are commands #command, #translate, #xcommand and #xtranslate that allow things like this: #xcommand REPEAT; => DO WHILE .T. #xcommand UNTIL <cond>; => IF (<cond>); ;EXIT; ;ENDIF; ;ENDDO LOCAL n := 1 REPEAT n := n + 1 UNTIL n > 100 Similarly, in Tcl I'm doing proc process_range {_for_ project _from_ dat1 _to_ dat2 _by_ slice} { set fromDate [clock scan $dat1] set toDate [clock scan $dat2] if {$slice eq "day"} then {set incrementor [expr 24 * 60]} if {$slice eq "hour"} then {set incrementor 60} set method DateRange puts "Scanning from [clock format $fromDate -format "%c"] to [clock format $toDate -format "%c"] by $slice" for {set dateCursor $fromDate} {$dateCursor <= $toDate} {set dateCursor [clock add $dateCursor $incrementor minutes]} { # ... } } process_range for "client" from "2013-10-18 00:00" to "2013-10-20 23:59" by day Are there any other languages that permit this kind of, almost COBOL-esque, syntax modification? If you're wondering why I'm asking, it's for setting up stuff so that others with a not-as-geeky-as-I-am skillset can declare processing tasks.

  Read the article

• Problem with wake after suspend using USB remote.

  - by Bod

  Hi, I'm a linux newbie looking for some help. I'm currently setting up an XBMC HTPC using a laptop and 10.10 and all works great except for waking from resume using the power button on the remote. The suspend works from remote works fine as does the resume using the power button on the laptop. I've checked /proc/acpi/wakeup which initially showed the following. Device S-state Status Sysfs node C096 S5 *disabled pci:0000:00:1e.0 C0F1 S3 *disabled pci:0000:00:1d.0 C0F8 S3 *disabled pci:0000:00:1d.1 C0F9 S3 *disabled pci:0000:00:1d.2 C0FA S3 *disabled pci:0000:00:1d.3 C0FB S3 *disabled pci:0000:00:1d.7 C102 S5 *disabled pci:0000:00:1c.0 C22B S5 *disabled pci:0000:08:00.0 C115 S5 *disabled pci:0000:00:1c.2 C22C S5 *disabled C118 S5 *disabled pci:0000:00:1c.3 C22C S5 *disabled I've since configured the above so that the S3 devices above are enabled. I've confirmed that they are the correct devices using lspci 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) None of this has worked unfortunately and I'm now stuck. It simply refuses to wakeup from the remote. The USB receiver shows no activity LED while suspended. Suspend/resume from the remote works fine from Windows 7 so I know the laptop is ok with it. Any ideas? I need to get this sorted to gain Wife Approval for this system. Thanks, Bod.

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >