Search Results

Search found 4955 results on 199 pages for 'range'.

Page 41/199 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• How do you guys handle translation for software localization?

  - by JohnFx

  Most of the software I have written over my career has been built for English speaking customers, but recently I've been working on a project where localization of the UI for a wider range of languages is desired. I am just curious how other programming shops obtain the translations. Do they use the notoriously flawed online translation engines? I know there are for-hire translators out there, but am I going to have to track down and contract like a dozen of them to do a thorough job of localizing my interface? Are there services that specialize in doing this for a wide range of languages? Perhaps using something like Amazon's Mechanical Turk would be an option, but I have no idea how diverse the available workforce is on that site. I'd imagine not very.

  Read the article

• Wireless Network Security: 7 Simple Tips

  This ubiquity of wireless networks means that there may be myriad potential network intruders lurking within range of your office WLAN.

  Read the article

• zLib on iPhone, stop at first BLOCK

  - by cedric

  I am trying to call iPhone zLib to decompress the zlib stream from our HTTP based server, but the code always stop after finishing the first zlib block. Obviously, iPhone SDK is using the standard open Zlib. My doubt is that the parameter for inflateInit2 is not appropriate here. I spent lots of time reading the zlib manual, but it isn't that helpful. Here is the details, your help is appreciated. (1) the HTTP request: NSURL *url = [NSURL URLWithString:@"http://192.168.0.98:82/WIC?query=getcontacts&PIN=12345678&compression=Y"]; (2) The data I get from server is something like this (if decompressed). The stream was compressed by C# zlib class DeflateStream: $REC_TYPE=SYS Status=OK Message=OK SetID= IsLast=Y StartIndex=0 LastIndex=6 EOR ...... $REC_TYPE=CONTACTSDISTLIST ID=2 Name=CTU+L%2EA%2E OnCallEnabled=Y OnCallMinUsers=1 OnCallEditRight= OnCallEditDLRight=D Fields= CL= OnCallStatus= EOR (3) However, I will only get the first Block. The code for decompression on iPhone (copied from a code piece from somewhere here) is as follow. The loop between Line 23~38 always break the second time execution. + (NSData *) uncompress: (NSData*) data { 1 if ([data length] == 0) return nil; 2 NSInteger length = [data length]; 3 unsigned full_length = length; 4 unsigned half_length =length/ 2; 5 NSMutableData *decompressed = [NSMutableData dataWithLength: 5*full_length + half_length]; 6 BOOL done = NO; 7 int status; 8 z_stream strm; 9 length=length-4; 10 void* bytes= malloc(length); 11 NSRange range; 12 range.location=4; 13 range.length=length; 14 [data getBytes: bytes range: range]; 15 strm.next_in = bytes; 16 strm.avail_in = length; 17 strm.total_out = 0; 18 strm.zalloc = Z_NULL; 19 strm.zfree = Z_NULL; 20 strm.data_type= Z_BINARY; 21 // if (inflateInit(&strm) != Z_OK) return nil; 22 if (inflateInit2(&strm, (-15)) != Z_OK) return nil; //It won't work if change -15 to positive numbers. 23 while (!done) 24 { 25 // Make sure we have enough room and reset the lengths. 26 if (strm.total_out >= [decompressed length]) 27 [decompressed increaseLengthBy: half_length]; 28 strm.next_out = [decompressed mutableBytes] + strm.total_out; 29 strm.avail_out = [decompressed length] - strm.total_out; 30 31 // Inflate another chunk. 32 status = inflate (&strm, Z_SYNC_FLUSH); //Z_SYNC_FLUSH-->Z_BLOCK, won't work either 33 if (status == Z_STREAM_END){ 34 35 done = YES; 36 } 37 else if (status != Z_OK) break; 38 } 39 if (inflateEnd (&strm) != Z_OK) return nil; 40 // Set real length. 41 if (done) 42 { 43 [decompressed setLength: strm.total_out]; 44 return [NSData dataWithData: decompressed]; 45 } 46 else return nil; 47 }

  Read the article

• New Replication, Optimizer and High Availability features in MySQL 5.6.5!

  - by Rob Young

  As the Product Manager for the MySQL database it is always great to announce when the MySQL Engineering team delivers another great product release.  As a field DBA and developer it is even better when that release contains improvements and innovation that I know will help those currently using MySQL for apps that range from modest intranet sites to the most highly trafficked web sites on the web.  That said, it is my pleasure to take my hat off to MySQL Engineering for today's release of the MySQL 5.6.5 Development Milestone Release ("DMR"). The new highlighted features in MySQL 5.6.5 are discussed here: New Self-Healing Replication ClustersThe 5.6.5 DMR improves MySQL Replication by adding Global Transaction Ids and automated utilities for self-healing Replication clusters.  Prior to 5.6.5 this has been somewhat of a pain point for MySQL users with most developing custom solutions or looking to costly, complex third-party solutions for these capabilities.  With 5.6.5 these shackles are all but removed by a solution that is included with the GPL version of the database and supporting GPL tools.  You can learn all about the details of the great, problem solving Replication features in MySQL 5.6 in Mat Keep's Developer Zone article.  New Replication Administration and Failover UtilitiesAs mentioned above, the new Replication features, Global Transaction Ids specifically, are now supported by a set of automated GPL utilities that leverage the new GTIDs to provide administration and manual or auto failover to the most up to date slave (that is the default, but user configurable if needed) in the event of a master failure. The new utilities, along with links to Engineering related blogs, are discussed in detail in the DevZone Article noted above. Better Query Optimization and ThroughputThe MySQL Optimizer team continues to amaze with the latest round of improvements in 5.6.5. Along with much refactoring of the legacy code base, the Optimizer team has improved complex query optimization and throughput by adding these functional improvements: Subquery Optimizations - Subqueries are now included in the Optimizer path for runtime optimization.  Better throughput of nested queries enables application developers to simplify and consolidate multiple queries and result sets into a single unit or work. Optimizer now uses CURRENT_TIMESTAMP as default for DATETIME columns - For simplification, this eliminates the need for application developers to assign this value when a column of this type is blank by default. Optimizations for Range based queries - Optimizer now uses ready statistics vs Index based scans for queries with multiple range values. Optimizations for queries using filesort and ORDER BY.  Optimization criteria/decision on execution method is done now at optimization vs parsing stage. Print EXPLAIN in JSON format for hierarchical readability and Enterprise tool consumption. You can learn the details about these new features as well all of the Optimizer based improvements in MySQL 5.6 by following the Optimizer team blog. You can download and try the MySQL 5.6.5 DMR here. (look under "Development Releases")  Please let us know what you think!  The new HA utilities for Replication Administration and Failover are available as part of the MySQL Workbench Community Edition, which you can download here .Also New in MySQL LabsAs has become our tradition when announcing DMRs we also like to provide "Early Access" development features to the MySQL Community via the MySQL Labs.  Today is no exception as we are also releasing the following to Labs for you to download, try and let us know your thoughts on where we need to improve:InnoDB Online OperationsMySQL 5.6 now provides Online ADD Index, FK Drop and Online Column RENAME.  These operations are non-blocking and will continue to evolve in future DMRs.  You can learn the grainy details by following John Russell's blog.InnoDB data access via Memcached API ("NotOnlySQL") - Improved refresh of an earlier feature releaseSimilar to Cluster 7.2, MySQL 5.6 provides direct NotOnlySQL access to InnoDB data via the familiar Memcached API. This provides the ultimate in flexibility for developers who need fast, simple key/value access and complex query support commingled within their applications.Improved Transactional Performance, ScaleThe InnoDB Engineering team has once again under promised and over delivered in the area of improved performance and scale.  These improvements are also included in the aggregated Spring 2012 labs release:InnoDB CPU cache performance improvements for modern, multi-core/CPU systems show great promise with internal tests showing:    2x throughput improvement for read only activity 6x throughput improvement for SELECT range Read/Write benchmarks are in progress More details on the above are available here. You can download all of the above in an aggregated "InnoDB 2012 Spring Labs Release" binary from the MySQL Labs. You can also learn more about these improvements and about related fixes to mysys mutex and hash sort by checking out the InnoDB team blog.MySQL 5.6.5 is another installment in what we believe will be the best release of the MySQL database ever.  It also serves as a shining example of how the MySQL Engineering team at Oracle leads in MySQL innovation.You can get the overall Oracle message on the MySQL 5.6.5 DMR and Early Access labs features here. As always, thanks for your continued support of MySQL, the #1 open source database on the planet!

  Read the article

• Enabling XML-documentation for code contracts

  - by DigiMortal

  One nice feature that code contracts offer is updating of code documentation. If you are using source code documenting features of Visual Studio then code contracts may automate some tasks you otherwise have to implement manually. In this posting I will show you some XML documentation files with documented contracts. I will also explain how this feature works. Enabling XML-documentation in project settings As a first thing let’s enable generating of code documentation under project settings. Open project properties, move to Build page and make check to checkbox called “XML documentation file”. Save project settings and rebuild project. When project is built go to bin/Debug folder and open the XML-file. Here is my XML. <?xml version="1.0"?> <doc>     <assembly>         <name>Eneta.Examples.CodeContracts.Testable</name>     </assembly>     <members>         <member name="T:Eneta.Examples.CodeContracts.Testable.Randomizer">             <summary>             Class for generating random integers in user specified range.             </summary>         </member>         <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.#ctor(Eneta.Examples.CodeContracts.Testable.IRandomGenerator)">             <summary>             Constructor of Randomizer. Initializes Randomizer class.             </summary>             <param name="generator">Instance of random number generator.</param>         </member>         <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.GetRandomFromRangeContracted(System.Int32,System.Int32)">             <summary>             Returns random integer in given range.             </summary>             <param name="min">Minimum value of random integer.</param>             <param name="max">Maximum value of random integer.</param>         </member>     </members> </doc> You can see nothing about code contracts here. Enabling code contracts documentation Code contracts have their own settings and conditions for documentation. Open project properties and move to Code Contracts tab. From “Contract Reference Assembly” dropdown check Build and make check to checkbox “Emit contracts into XML doc file”. And again – save project setting, build the project and move to bin/Debug folder. Now you can see that there are two files for XML-documentation: <assembly name>.XML <assembly name>.old.XML First files is documentation with contracts, second file is original documentation without contracts. Let’s see now what is inside our new XML-documentation file. <?xml version="1.0"?> <doc>   <assembly>     <name>Eneta.Examples.CodeContracts.Testable</name>   </assembly>   <members>     <member name="T:Eneta.Examples.CodeContracts.Testable.Randomizer">       <summary>             Class for generating random integers in user specified range.             </summary>     </member>     <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.#ctor(Eneta.Examples.CodeContracts.Testable.IRandomGenerator)">       <summary>             Constructor of Randomizer. Initializes Randomizer class.             </summary>       <param name="generator">Instance of random number generator.</param>     </member>     <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.GetRandomFromRangeContracted(System.Int32,System.Int32)">       <summary>             Returns random integer in given range.             </summary>       <param name="min">Minimum value of random integer.</param>       <param name="max">Maximum value of random integer.</param>       <requires description="Min must be less than max" exception="T:System.ArgumentOutOfRangeException">                 min &lt; max</requires>       <exception cref="T:System.ArgumentOutOfRangeException">                 min &gt;= max</exception>       <ensures description="Return value is out of range">                 Contract.Result&lt;int&gt;() &gt;= min &amp;&amp;                 Contract.Result&lt;int&gt;() &lt;= max</ensures>     </member>   </members> </doc> As you can see then code contracts are pretty well documented. Messages that I provided with code contracts are also available in documentation. If I wrote very good and informative messages then these messages are very useful also in contracts documentation. Code contracts and Sandcastle Sandcastle knows nothing about code contracts by default. There is separate package of file for Sandcastle that is provided you by code contracts installation. You can read from code contracts manual: “Sandcastle (http://www.codeplex.com/Sandcastle) is a freely available tool that generates help les and web sites describing your APIs, based on the XML doc comments in your source code. The CodeContracts install contains a set of les that can be copied over a Sandcastle installation to take advantage of the additional contract information. The produced documentation adds a contract section to methods with declared requires and/or ensures. In order for Sandcastle to produce Contract sections, you need to patch a number of files in its installation. Please refer to the Sandcastle Readme.txt found under Start Menu/CodeContracts/Sandcastle for instructions. A future release of Sandcastle will hopefully support contract sections without the need for this patching step.” Integrating code contracts documentation to Sandcastle will be one of my next postings about code contracts. Conclusion if you are using code documentation then documentation about code contracts can be added to documentation very easily. All you have to do is to enable XML-documentation for contracts and build your project. Later you can use Sandcastle files provided by code contracts installer to integrate contracts documentation to your output documentation package.

  Read the article

• Ping.eu

  - by Sarang

  Found an interesting resource thanks to a close friend. Ping.eu is a free service which would let you test various aspects related to networks which would typically be pain inducing doing it on your own. For seasoned network professional having a MAC address of their own instead of a name :) this might not be that useful. However for a layperson like me this an invaluable resource. These guys provide you with following services: Ping – Shows how long it takes for packets to reach host Traceroute – Traces the route of packets to destination host from our server DNS lookup – Look up DNS record WHOIS – Lists contact info for an IP or domain Port check – Tests if port is opened on specified IP Reverse lookup – Gets hostname by IP address Proxy checker – Detects a proxy server Mail relaying – Tests relaying capabilities of specified mail-server Bandwidth meter – Detects your download speed from our server Network calculator – Calculates subnet range by network mask Network mask calculator – Calculates network mask by subnet range Country by IP – Detects country by IP or hostname Unit converter – Converts values from one unit to another   Taken straight from their site. Thanks Ping.eu

  Read the article

• Neuberger Berman Defines CRM Strategy In Asset Management

  - by michael.seback

  Neuberger Berman Defines Front Office Strategy for the New Firm Neuberger Berman is a majority employee-owned independent asset management firm with a heritage dating back to 1939. It provides a range of investment options, wealth planning services, and advice to meet individual needs. It also offers a broad range of financial capabilities and specializes in developing innovative and customized investment solutions for institutions. ... "The Insight team's analysis was critical to helping us assess the strengths and weaknesses of our Siebel implementation. It helped us to come up with our strategic plan for using customer relationship management and business intelligence capabilities." - Roxana Feldmann, Senior Vice President Technology ...Read more.

  Read the article

• Multiple domains and product categories but one company?

  - by Brad

  Hi Guys, My company is expanding online, and we are wondering the best way to go about our eCommerce strategy. We sell a wide range of products of a single material, lets use ceramics as an example. The current competition in our niche online is medium level. We currently have one site selling all our range: ceramicstuff.com However I have just found that ceramickitchenware.com, ceramicbowls.com, etc are currently unregistered, despite quite decent traffic search volume around those keywords monthly. What do you guys think about registering these domains to increase traffic? Would I put a standalone sites on those domains, or do I point them to my main domain? Or do I use them a "micro" sites to offer information, and then link to buy at my main domain, etc? Summary: I'm looking to employ "spammy" type SEO tricks, multiple domains, etc but the key point is I will be generating REAL content, and offering a REAL QUALITY product. How to proceed? Thanks!

  Read the article

• Scripts won't affect clones - Unity3d

  - by user3666251

  I made a script which swaps two game objects on click.But the script won't work because the objects are actualy clones of the original prefab. This is the script (UnityScript): #pragma strict var object1 : GameObject; var object2 : GameObject; function OnMouseDown () { Instantiate(object2,object1.transform.position,object1.transform.rotation); Destroy(object1); } I use this script to create other game objects (clones)[c#] : using UnityEngine; using System.Collections; public class Spawner : MonoBehaviour { public GameObject[] obj; public float spawnMin = 1f; public float spawnMax = 2f; // Use this for initialization void Start () { Spawn (); } void Spawn() { Instantiate(obj[Random.Range(0, obj.GetLength(0))],transform.position, Quaternion.identity); Invoke ("Spawn", Random.Range (spawnMin, spawnMax)); } } The objects get renamed to NAME (Clone). What I wanna do is make the script affect clones too.So they will swap when I click on them.

  Read the article

• PCF shadow shader math causing artifacts

  - by user2971069

  For a while now I used PCSS for my shadow technique of choice until I discovered a type of percentage closer filtering. This method creates really smooth shadows and with hopes of improving performance, with only a fraction of texture samples, I tried to implement PCF into my shader. This is the relevant code: float c0, c1, c2, c3; float f = blurFactor; float2 coord = ProjectedTexCoords; if (receiverDistance - tex2D(lightSampler, coord + float2(0, 0)).x > 0.0007) c0 = 1; if (receiverDistance - tex2D(lightSampler, coord + float2(f, 0)).x > 0.0007) c1 = 1; if (receiverDistance - tex2D(lightSampler, coord + float2(0, f)).x > 0.0007) c2 = 1; if (receiverDistance - tex2D(lightSampler, coord + float2(f, f)).x > 0.0007) c3 = 1; coord = (coord % f) / f; return 1 - (c0 * (1 - coord.x) * (1 - coord.y) + c1 * coord.x * (1 - coord.y) + c2 * (1 - coord.x) * coord.y + c3 * coord.x * coord.y); This is a very basic implementation. blurFactor is initialized with 1 / LightTextureSize. So the if statements fetch the occlusion values for the four adjacent texels. I now want to weight each value based on the actual position of the texture coordinate. If it's near the bottom-right pixel, that occlusion value should be preferred. The weighting itself is done with a simple bilinear interpolation function, however this function takes a 2d vector in the range [0..1] so I have to convert my texture coordinate to get the distance from my first pixel to the second one in range [0..1]. For that I used the mod operator to get it into [0..f] range and then divided by f. This code makes sense to me, and for specific blurFactors it works, producing really smooth one pixel wide shadows, but not for all blurFactors. Initially blurFactor is (1 / LightTextureSize) to sample the 4 adjacent texels. I now want to increase the blurFactor by factor x to get a smooth interpolation across maybe 4 or so pixels. But that is when weird artifacts show up. Here is an image: Using a 1x on blurFactor produces a good result, 0.5 is as expected not so smooth. 2x however doesn't work at all. I found that only a factor of 1/2^n produces an good result, every other factor produces artifacts. I'm pretty sure the error lies here: coord = (coord % f) / f; Maybe the modulo is not calculated correctly? I have no idea how to fix that. Is it even possible for pixel that are further than 1 pixel away?

  Read the article

• Project Euler 6: (Iron)Python

  - by Ben Griswold

  In my attempt to learn (Iron)Python out in the open, here’s my solution for Project Euler Problem 6.  As always, any feedback is welcome. # Euler 6 # http://projecteuler.net/index.php?section=problems&id=6 # Find the difference between the sum of the squares of # the first one hundred natural numbers and the square # of the sum. import time start = time.time() square_of_sums = sum(range(1,101)) ** 2 sum_of_squares = reduce(lambda agg, i: agg+i**2, range(1,101)) print square_of_sums - sum_of_squares print "Elapsed Time:", (time.time() - start) * 1000, "millisecs" a=raw_input('Press return to continue')

  Read the article

• Project Euler 1: (Iron)Python

  - by Ben Griswold

  In my attempt to learn (Iron)Python out in the open, here’s my solution for Project Euler Problem 1.  As always, any feedback is welcome. # Euler 1 # http://projecteuler.net/index.php?section=problems&amp;id=1 # If we list all the natural numbers below 10 that are # multiples of 3 or 5, we get 3, 5, 6 and 9. The sum of # these multiples is 23. Find the sum of all the multiples # of 3 or 5 below 1000. import time start = time.time() print sum([x for x in range(1000) if x % 3== 0 or x % 5== 0]) print "Elapsed Time:", (time.time() - start) * 1000, "millisecs" a=raw_input('Press return to continue') # Also cool def constraint(x): return x % 3 == 0 or x % 5 == 0 print sum(filter(constraint, range(1000)))

  Read the article

• Is scanning the ports considered harmful?

  - by Manoj R

  If any application is scanning the ports of other machines, to find out whether any particular service/application is running, will it be considered harmful? Is this treated as hacking? How else can one find out on which port the desired application is running (without the user input)? Let's say I only know the port range in which the other application could be running, but not the exact port. In this case, my application ping each of the port in range to check whether the other application is listening on it, using already defined protocol. Is this a normal design? Or is this considered harmful for the security?

  Read the article

• Best way to handle realtime melee AI in authoritative network environment

  - by PrimeDerektive

  So i've been working on a multiplayer game for a bit; it's a co-op action RPG with real-time combat. If you've seen or played TERA, I'd say it's comparable to that, but not an MMO, heh. I'm currently handling the AI units authoritatively, the server calculates their pathing, movement, and pursue/attack logic, and syncs the movement to the clients 15x per second, and the state changes when they happen. When I emulate 200ms ping, though, the client can perceive being out of range to an AI's attack, but still take the hit, because on the server he hadn't moved that far yet. This also plays hell with my real-time blocking. I don't really want to allow the clients to be allowed to say "that was out of range" or "I blocked that", but I'm not really sure how else to handle it.

  Read the article

• ASP.NET AJAX MultiHandleSliderExtender - Slide by Year and Month

  Tutorial - How to utilize ASP.NET MultiHandleSlider extender to select year and month in a range, and set the Chart controls in action

  Read the article

• Help with Strategy-game AI

  - by f20k

  Hi, I am developing a strategy-game AI (think: Final Fantasy Tactics), and I am having trouble coming up for the design of the AI. My main problem is determining which is the optimal thing for it to do. First let me describe the priority of what action I would like the AI to take: Kill nearest player unit Fulfill primary directive (kill all player units, kill target unit, survive for x turns) Heal ally unit / cast buffer Now the AI can do the following in its turn: Move - {Attack / Ability / Item} (either attack or ability or item) {Attack / Ability / Item} - Move Move closer (if targets not in range) {Attack / Ability / Item} (if move not available) Notes Abilities have various ranges / effects / costs / effects. Each ai unit has maybe 5-10 abilities to choose from. The AI will prioritize killing over safety unless its directive is to survive for x turns. It also doesn't care about ability cost much. While a player may want to save a big spell for later, the AI will most likely use it asap. Movement is on a (hex) grid num of player units: 3-6 num of ai units: 3-7 or more. Probably max 10. AI and player take turns controlling ONE unit, instead of all at the same time. Platform is Android (if program doesnt respond after some time, there will be a popup saying to Force Quit or Wait - which looks really bad!). Now comes the questions: The best ability to use would obviously be the one that hits the most targets for the most damage. But since each ability has different ranges, I won't know if they are in range without exploring each possible place I can move to. One solution would be to go through each possible places to move to, determine the optimal attack at that location - which gives me a list of optimal moves for each location. Then choose the optimal out of the list and execute it. But this will take a lot of CPU time. Is there a better solution? My current idea is to move as close as possible towards the closest, largest group of people, and determine the optimal attack/ability from there. I think this would be a lot less work for the CPU and still allow for wide-range attacks. Its sub-optimal but the AI will still seem 'smart'. Other notes/questions: Am I over-thinking/over-complicating it? Better solution? I am open to all sorts of suggestions I have taken a look at the spell-casting question, but it doesn't take into account the movement - so perhaps use that algo for each possible move location? The top answer mentioned it wasn't great for area-of-effect and group fights - so maybe requires more tweaking? Please, if you mention a graph/tree, let me know basically how to use it. E.g. Node means ability, level corresponds to damage, then search for the deepest node.

  Read the article

• Unobtrusive Maximum Input Lengths with JQuery and FluentValidation

  - by Steve Wilkes

  If you use FluentValidation and set a maximum length for a string or a maximum  value for a numeric property, JQuery validation is used to show an error message when the user inputs too many characters or a numeric value which is too big. On a recent project we wanted to use input’s maxlength attribute to prevent a user from entering too many characters rather than cure the problem with an error message, and I added this JQuery to add maxlength attributes based on JQuery validation’s data- attributes. $(function () { $("input[data-val-range-max],input[data-val-length-max]").each(function (i, e) { var input = $(e); var maxlength = input.is("[data-val-range-max]") ? input.data("valRangeMax").toString().length : input.data("valLengthMax"); input.attr("maxlength", maxlength); }); }); Presto!

  Read the article

• Store and create game objects at positions along terrain

  - by Alex

  I have a circular character that rolls down terrain like that shown in the picture below. The terrain is created from an array holding 1000 points. The ground is drawn one screen width infront and one screen width behind. So as the character moves, edges are created infront and edges are removed behind. My problem is, I want to create box2d bodies at certain locations along the path and need a way to store these creator methods or objects. I need some way to store a position at which they are created and some pointer to a function to create them, once the character is in range. I guess this would be an array of some sort that is checked each time the ground is updated and then if in range, the function is executed and removed from the array. But I'm not sure if its even possible to store pointers to functions with parameters included... any help is much appreciated!

  Read the article

• How do i use latest Pulseaudio in 11.10?

  - by YumYumYum

  Ubuntu 11.04 i had pulseaudio from source compiled and i used it to learn, it always worked (git versions). But since i have Ubuntu 11.10, i can install it but i can not use it anymore like i do in 11.04 before. Everytime i play something its throwing this: $ speaker-test speaker-test 1.0.24.2 Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Rate set to 48000Hz (requested 48000Hz) Buffer size range from 192 to 2097152 Period size range from 64 to 699051 Using max buffer size 2097152 Periods = 4 ALSA lib pcm_pulse.c:746:(pulse_prepare) PulseAudio: Unable to create stream: Invalid argument Unable to set hw params for playback: Input/output error Setting of hwparams failed: Input/output error How to make pulseaudio work in 11.10 from source?

  Read the article

• Multi subnet in ubuntu with dnsmasq

  - by Fox Mulder

  I have a multi lan port box that install ubuntu server 11.10. I am setup network in /etc/network/interfaces file as follow: auto lo iface lo inet loopback auto eth0 iface eth0 inet static      address 192.168.128.254      netmask 255.255.255.0      network 192.168.128.0      broadcast 192.168.128.255      gateway 192.168.128.1      dns-nameservers xxxxxx auto eth1 iface eth1 inet static      address 192.168.11.1      netmask 255.255.255.0      network 192.168.11.0      broadcast 192.168.11.255 auto eth2 iface eth2 inet static      address 192.168.21.1      netmask 255.255.255.0      network 192.168.21.0      broadcast 192.168.21.255 auto eth3 iface eth3 inet static      address 192.168.31.1      netmask 255.255.255.0      network 192.168.31.0      broadcast 192.168.31.255 I am also enable the ip forward by echo 1 /proc/sys/net/ipv4/if_forward in rc.local. my dnsmasq config as follow except-interface=eth0 dhcp-range=interface:eth1,set:wifi,192.168.11.101,192.168.11.200,255.255.255.0 dhcp-range=interface:eth2,set:kids,192.168.21.101,192.168.21.200,255.255.255.0 dhcp-range=interface:eth3,set:game,192.168.31.101,192.168.31.200,255.255.255.0 the dhcp was working fine in eth1,eth2,eth3, any machine plug in the subnet can get correct subnet's ip. My problem was, each subnet machine can't ping each other. for example. 192.168.11.101 can't ping 192.168.21.101 but can ping 192.168.128.1 192.168.31.101 can't ping 192.168.21.101 but can ping 192.168.128.1 I am also try to using route add -net 192.168.11.0 netmask 255.255.255.0 gw 192.168.11.1 (and also 192.168.21.0/192.168.31.0) at this multi-lan-port machine. But still won't work. Does anyone can help ? Thanks.

  Read the article

• move carat to the end of a text input field AND make the end visible

  - by user322384

  I'm going insane. I have an autosuggest box where users choose a suggestion. On the next suggestion selection the value of the text input box exceeds its size. I can move the carat to the end of the input field crossbrowser, no problem. But on Chrome and Safari I cannot SEE the carat at the end. The end of the text is not visible. Is there a way to move the carat to the end of a text input field AND have the end of the field visible so that the user is not confused about where the input carat went? what I got so far: <html> <head><title>Field update test</title></head> <body> <form action="#" method="POST" name="testform"> <p>After a field is updated the carat should be at the end of the text field AND the end of the text should be visible</p> <input type="text" name="testbox" value="" size="40"> <p><a href="javascript:void(0);" onclick="add_more_text();">add more text</a></p> </form> <script type="text/javascript"> <!-- var count = 0; function add_more_text() { var textfield = document.testform.elements['testbox']; textfield.blur(); textfield.focus(); if (count == 0) textfield.value = ''; // clear old count++; textfield.value = (count ? textfield.value : '') + ", " + count + ": This is some sample text"; // move to the carat to the end of the field if (textfield.setSelectionRange) { textfield.setSelectionRange(textfield.value.length, textfield.value.length); } else if (textfield.createTextRange) { var range = textfield.createTextRange(); range.collapse(true); range.moveEnd('character', textfield.value.length); range.moveStart('character', textfield.value.length); range.select(); } // force carat visibility for some browsers if (document.createEvent) { // Trigger a space keypress. var e = document.createEvent('KeyboardEvent'); if (typeof(e.initKeyEvent) != 'undefined') { e.initKeyEvent('keypress', true, true, null, false, false, false, false, 0, 32); } else { e.initKeyboardEvent('keypress', true, true, null, false, false, false, false, 0, 32); } textfield.dispatchEvent(e); // Trigger a backspace keypress. e = document.createEvent('KeyboardEvent'); if (typeof(e.initKeyEvent) != 'undefined') { e.initKeyEvent('keypress', true, true, null, false, false, false, false, 8, 0); } else { e.initKeyboardEvent('keypress', true, true, null, false, false, false, false, 8, 0); } textfield.dispatchEvent(e); } } // --> </script> </body> </html> Thanks

  Read the article

• using curl command to download file in parts from different interfaces and to run the commands simultaneously from a script

  - by jsjain007

  i wanted to download a file using curl command simultaneously in different parts using ip aliasing(virtual Ethernet ports) so what i did was pasted the commands in a text file and run but the problem as obvious since it is in a file the commands will be executed one by one so is there a way to run all those commands simultaneously. here is the command curl --interface eth0:0 --range 0,38010880 http://wdl.cache.ijinshan.com/wps/download/Linux/unstable/kingsoft-office_9.1.0.4244~a12p3_i386.deb -o kinsoft-office.part1 curl --interface eth0:1 --range 38010880 ,- http://wdl.cache.ijinshan.com/wps/download/Linux/unstable/kingsoft-office_9.1.0.4244~a12p3_i386.deb -o kinsoft-office.part2 cat kinsoft-office.part*>kinsoft-office can anyone help me to run these above 2 commands simultaneously from the script so as to increase download speed

  Read the article

• Is there a (free) reliable place to get statistics from sites, more reliable than Alexa, Quantcast, Compete?

  - by S.gfx

  I mean, seems there's no way. I am just asking in case someone knows of a recent new site being more accurate. I am aware of Alexa's, Compete and Quantcast inaccuracies and/or limited system/range of sites to get their stats. I also know about websitegrader perhaps being a little more accurate (although not sure if that's the data I am after). And read Seomoz tools are reliable. I am yet though looking for a free solution, a 'reliable' Alexa. And not a place depending on a toolbar installation, an easy to trick place, or one with stats way too off, or of a very limited range of sites. I am almost sure there's nothing new, but I wanted to be sure.

  Read the article

• PHP access data of an object

  - by sea_1987

  I have an object of which I am looking to get a piece of data from, the object looks like this, Product Object ( [name] => Simon Test Cup [code] => 123456789 [category_id] => 3 [range_id] => 26 [price] => 10.00 [price_logo_add] => 0.25 [image_id] => 846 [rank] => [special_offer] => N [cartProps] => Array ( ) [section] => [vatPercentage] => 17.5 [id] => 551 [date_created] => 2010-05-25 12:46:57 [last_updated] => 2010-05-25 14:10:48 [user_id_updated] => 0 [_aliases] => Array ( [id] => 551 [date_created] => 2010-05-25 12:46:57 [date_updated] => 2010-05-25 14:10:48 [user_id_updated] => 0 [name] => Simon Test Cup [code] => 123456789 [category_id] => 3 [range_id] => 26 [price] => 10.00 [price_logo_add] => 0.25 [image_id] => 846 [range_image_id] => 848 [main_image_id] => 847 [rank] => [special_offer] => N ) [_default] => Array ( [special_offer] => N ) [_related] => Array ( [_related] => Array ( [range] => stdClass Object ( [key] => range [group] => _related [foreignKey] => range_id [indexName] => id [tableName] => cc_range [objectName] => Range [userFieldlyColName] => name [criteria] => id='{%range_id%}' [sqlPostfix] => [populateOnLoad] => [objects] => Array ( [26] => Range Object ( [name] => Shot glasses [url_name] => shot-glasses [description] => Personalized shot glasses make great commemorative gifts, souvenirs and wedding favours. Just select your favourite shape and send us a customization form with your logo. See our glassware sale page for info on free logo origination. [leader] => Customized shot glasses make great commemorative gifts, promotional items and wedding favours. Individual gift boxes are available so you can give the glasses away easily. [category_id] => 3 [site_id_csv] => [image_id_main] => 565 [image_id_thumb] => 566 [rank] => [site] => main [id] => 26 [date_created] => 2008-05-18 21:39:52 [last_updated] => 2009-02-03 13:49:10 [user_id_updated] => 0 [_aliases] => Array I am wanting to get the id from the [range] = stdClass Object

  Read the article

• rotating an object on an arc

  - by gardian06

  I am trying to get a turret to rotate on an arc, and have hit a wall. I have 8 possible starting orientations for the turrets, and want them to rotate on a 90 degree arc. I currently take the starting rotation of the turret, and then from that derive the positive, and negative boundary of the arc. because of engine restrictions (Unity) I have to do all of my tests against a value which is between [0,360], and due to numerical precision issues I can not test against specific values. I would like to write a general test without having to go in, and jury rig cases //my current test is: // member variables public float negBound; public float posBound; // found in Start() function (called immediately after construction) // eulerAngles.y is the the degree measure of the starting y rotation negBound = transform.eulerAngles.y-45; posBound = transform.eulerAngles.y+45; // insure that values are within bounds if(negBound<0){ negBound+=360; }else if(posBound>360){ posBound-=360; } // called from Update() when target not in firing line void Rotate(){ // controlls what direction if(transform.eulerAngles.y>posBound){ dir = -1; } else if(transform.eulerAngles.y < negBound){ dir = 1; } // rotate object } follows is a table of values for my different cases (please excuse my force formatting) read as base is the starting rotation of the turret, neg is the negative boundry, pos is the positive boundry, range is the acceptable range of values, and works is if it performs as expected with the current code. |base-|-neg-|-pos--|----------range-----------|-works-| |---0---|-315-|--45--|-315-0,0-45----------|----------| |--45--|---0---|--90--|-0-45,54-90----------|----x----| |-135-|---90--|-180-|-90-135,135-180---|----x----| |-180-|--135-|-225-|-135-180,180-225-|----x----| |-225-|--180-|-270-|-180-225,225-270-|----x----| |-270-|--225-|-315-|-225-270,270-315-|----------| |-315-|--270-|---0---|--270-315,315-0---|----------| I will need to do all tests from derived, or stored values, but can not figure out how to get all of my cases to work simultaneously. //I attempted to concatenate the 2 tests: if((transform.eulerAngles.y>posBound)&&(transform.eulerAngles.y < negBound)){ dir *= -1; } this caused only the first case to be successful // I attempted to store a opposite value, and do a void Rotate(){ // controlls what direction if((transform.eulerAngles.y > posBound)&&(transform.eulerAngles.y<oposite)){ dir = -1; } else if((transform.eulerAngles.y < negBound)&&(transform.eulerAngles.y>oposite)){ dir = 1; } // rotate object } this causes the opposite situation as indicated on the table. What am I missing here?

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >