Search Results

Search found 44502 results on 1781 pages for 'run as administrator'.

Page 41/1781 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • How should I read from a buffered reader?

    - by Roman
    I have the following example of reading from a buffered reader: while ((inputLine = input.readLine()) != null) { System.out.println("I got a message from a client: " + inputLine); } The code in the loop println will be executed whenever something appears in the buffered reader (input in this case). In my case, if a client-application writes something to the socket, the code in the loop (in the server-application) will be executed. But I do not understand how it works. inputLine = input.readLine() waits until something appears in the buffered reader and when something appears there it returns true and the code in the loop is executed. But when null can be returned. There is another question. The above code was taken from a method which throws Exception and I use this code in the run method of the Thread. And when I try to put throws Exception before the run the compiler complains: overridden method does not throw exception. Without the throws exception I have another complain from the compiler: unreported exception. So, what can I do?

    Read the article

  • Problem with bluetooth on android 2.1 (samsung spica i5700) where pairing works but connection does

    - by user319634
    I have a Samsung Spica i5700 which I already have updated to Android 2.1. I am using the phone with an application called Run.GPS (http://www.rungps.net). This application logs data such as GPS position, route, speed, bearing etc. It can also log heartrate provided the user has a Zephyr HxM bluetooth heart rate monitor ("HxM"), which I do have. I can pair the HxM to the phone through the standard bluetooth utility. I'm prompted for the PIN, which I enter and the device is shown as 'Paired but not connected'. In the Run.GPS application itself, I click on 'Connect Heartrate Monitor'. This times out after about 30 seconds and the error message is 'Could not connect to heartrate monitor. Please try other settings'. I used a friend's HTC Windows Mobile as a control device to see if the HxM works there. It does. The Run.GPS application automatically sets the baud rate (initially to 9600 IIRC, though the connection also worked with higher baud rates) and it is possible to choose between various COM ports as well as a .Net COM port. I did some testing on my Spica Android, to try to find out why the bluetooth connection doesn't work. Below are some log files that I connected over adb when I clicked on 'Connect to Heartrate Monitor' in the Run.GPS application. I would be interested in any tips (including if I'm posting to the wrong forum here ;-)) - whether or not it's possible to experiment with the baud rate in Android etc. I still don't know if the problem is with the Run.GPS application (I've posted already on the development forum there) or with Android 2.1. I checked out another application - Endomondo - which is also a sport tracking application which supports heartrate monitor only with the HxM. There, what looked like exactly the same error occurred - I clicked on 'Connect Zephyr HxM'. For a few seconds I was shown the 'Connecting...' status, but then it timed out into 'Not Connected'. I'm thus tending towards looking at Android for the problem. Here's the output of adb logcat while trying to connect ./adb logcat | grep Run.GPS D/WYNEX> (11551): Excute :: Run.GPS Trainer UV, (null) E/Run.GPS (11997): Cannot connect to BT device E/Run.GPS (11997): java.io.IOException: Service discovery failed E/Run.GPS (11997): at android.bluetooth.BluetoothSocket$SdpHelper.doSdp(BluetoothSocket.java:374) E/Run.GPS (11997): at android.bluetooth.BluetoothSocket.connect(BluetoothSocket.java:184) E/Run.GPS (11997): at ju.a(Unknown Source) E/Run.GPS (11997): at qk.j(Unknown Source) E/Run.GPS (11997): at fs.c(Unknown Source) E/Run.GPS (11997): at le.a(Unknown Source) E/Run.GPS (11997): at s.b(Unknown Source) E/Run.GPS (11997): at pb.a(Unknown Source) E/Run.GPS (11997): at as.a(Unknown Source) E/Run.GPS (11997): at am.b(Unknown Source) E/Run.GPS (11997): at gf.onTouchEvent(Unknown Source) E/Run.GPS (11997): at android.view.View.dispatchTouchEvent(View.java:3709) E/Run.GPS (11997): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) E/Run.GPS (11997): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) E/Run.GPS (11997): at com.android.internal.policy.impl.PhoneWindow$DecorView.superDispatchTouchEvent(PhoneWindow.java:1665) E/Run.GPS (11997): at com.android.internal.policy.impl.PhoneWindow.superDispatchTouchEvent(PhoneWindow.java:1107) E/Run.GPS (11997): at android.app.Activity.dispatchTouchEvent(Activity.java:2061) E/Run.GPS (11997): at com.android.internal.policy.impl.PhoneWindow$DecorView.dispatchTouchEvent(PhoneWindow.java:1649) E/Run.GPS (11997): at android.view.ViewRoot.handleMessage(ViewRoot.java:1694) E/Run.GPS (11997): at android.os.Handler.dispatchMessage(Handler.java:99) E/Run.GPS (11997): at android.os.Looper.loop(Looper.java:123) E/Run.GPS (11997): at android.app.ActivityThread.main(ActivityThread.java:4363) E/Run.GPS (11997): at java.lang.reflect.Method.invokeNative(Native Method) E/Run.GPS (11997): at java.lang.reflect.Method.invoke(Method.java:521) E/Run.GPS (11997): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) E/Run.GPS (11997): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) E/Run.GPS (11997): at dalvik.system.NativeStart.main(Native Method) E/Run.GPS (11997): Cannot connect to BT device E/Run.GPS (11997): java.io.IOException: Service discovery failed Here's the output of dmesg while trying to connect the heartrate monitor <4>[74726.239833] select 11691 (.serviceModeApp), adj 15, size 3205, to kill <4>[74726.240741] select 11739 (com.wssnps), adj 15, size 3207, to kill <4>[74726.246870] select 11750 (id.partnersetup), adj 15, size 3219, to kill <4>[74726.253390] select 11857 (p.bluetoothicon), adj 15, size 3299, to kill <4>[74726.259879] select 13131 (ndroid.settings), adj 15, size 4586, to kill <4>[74726.266372] send sigkill to 13131 (ndroid.settings), adj 15, size 4586 <7>[74733.945097] [BT] GPIO_BT_WAKE = 1 <7>[74733.945121] [BT] wake_lock(bt_wake_lock) <7>[74733.951799] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74733.951822] [BT] wake_lock timeout = 5 sec <7>[74735.890196] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74736.150987] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74736.151009] [BT] wake_lock timeout = 5 sec <7>[74737.490185] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74740.073913] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74740.073948] [BT] wake_lock timeout = 5 sec <7>[74741.315336] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74743.249747] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74743.249768] [BT] wake_lock timeout = 5 sec <7>[74744.865099] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74745.154487] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74745.154509] [BT] wake_lock timeout = 5 sec <7>[74748.852534] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74749.156256] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74749.156278] [BT] wake_lock timeout = 5 sec <7>[74750.490018] [BT] GPIO_BT_HOST_WAKE = 0 <4>[74754.230424] select 11691 (.serviceModeApp), adj 15, size 3191, to kill <4>[74754.231326] select 11739 (com.wssnps), adj 15, size 3193, to kill <4>[74754.237473] select 11750 (id.partnersetup), adj 15, size 3205, to kill <4>[74754.243950] select 11857 (p.bluetoothicon), adj 15, size 3283, to kill <4>[74754.250452] select 13140 (com.svox.pico), adj 15, size 3465, to kill <4>[74754.256787] send sigkill to 13140 (com.svox.pico), adj 15, size 3465

    Read the article

  • SQL SERVER – Dedicated Access Control for SQL Server Express Edition – An error occurred while obtaining the dedicated administrator connection (DAC) port.

    - by pinaldave
    Recently I had faced very interesting situation. Due to some reason we were not able to login into the production server for one of client. The reason for the same was that server was very busy, we had to login into the system and bring server to normal situation. When all the attempts failed, I decided to login using Dedicated Administrator Connection (DAC). However when I attempted to connect using DAC it threw following error for me. C:\Users\pinald>sqlcmd -A -d master -S .\SQLEXPRESS Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : SQL Server Network Interfaces: An error occurred while obtaining the dedicated administrator connection (DAC) port. Make sure that SQL Browser is running, or check the error log for t he port number [xFFFFFFFF]. .Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Login timeout expired.Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. I was bit taken a back as I knew that my commands are correct to login and if DAC does not work, there should be some serious reason for it. When inquired further about the SQL Server version I learned that it was SQL Server Express version deployed. To conserve resources, SQL Server Express does not listen on the DAC port. There is an additional step to be done if SQL Server Express has to be used with DAC. Enable TRACEFLAG on SQL Server Express will enable the connection by DAC possible. Here is the quick methods how one can enable DAC on SQL Server Express. Go to Start >> All Program >>Microsoft SQL Server (your version) >> Configuration Tools >> SQL Server Configuration Manager. Click on SQL Server Services >> Select your SQL Server Express version >> Right Click Properties >> select Startup Parameters Once on the Startup Parameter add the Startup parameter which is TRACEFLAG -T7806. Click on OK and RESTART SQL Server Express edition. Now once again try to connect to SQL Server Express edition and it will work just fine. This is absolutely documented method on BOL and SQL Server Express needs to be restarted. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Error Messages, SQL Interview Questions and Answers, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology Tagged: SQL Server Express

    Read the article

  • Sage 50 Accounts 2010 wont run on windows 7

    - by admintech
    I have sucessfuly installed Sage 50 Accounts 2010 onto my 32 bit Windows 7 machine, yet whenever i try to run it i encounter - Log Name: Application Source: Application Error Date: 24/05/2010 17:14:13 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: LukeThomas-PC.domain.co.uk Description: Faulting application name: Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe, version: 2.0.0.91, time stamp: 0x4a8c22fe Faulting module name: igdumd32.dll, version: 8.15.10.1872, time stamp: 0x4a848a05 Exception code: 0xc0000409 Fault offset: 0x00012f96 Faulting process id: 0x1778 Faulting application start time: 0x01cafb5c2493b609 Faulting application path: C:\Program Files\Common Files\Sage SBD\Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe Faulting module path: C:\Windows\system32\igdumd32.dll Report Id: 63e2246b-674f-11df-96ba-002564c97988 Event Xml: 1000 2 100 0x80000000000000 5062 Application LukeThomas-PC.domain.co.uk Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe 2.0.0.91 4a8c22fe igdumd32.dll 8.15.10.1872 4a848a05 c0000409 00012f96 1778 01cafb5c2493b609 C:\Program Files\Common Files\Sage SBD\Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe C:\Windows\system32\igdumd32.dll 63e2246b-674f-11df-96ba-002564c97988 Any help would be appreciated as i cant find anything about this error

    Read the article

  • Apache Unclean shutdown of previous apache run

    - by Darth
    I'm having problem with running Apache2.2 on my Vista machine. When I clean install Apache it works just fine, but after I installed PHP, I'm getting this error message in logs. [Fri Oct 23 21:29:02 2009] [warn] pid file C:/Dev/Apache2.2/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run? Apache service was stopped when installing PHP. I did only one shutdown before instalation via Apache Service Monitor. Deleting httpd.pid and starting again doesn't help. I even tried to lookup process with PID in that file, but there is no such process.

    Read the article

  • Unable to run openoffice in headless mode

    - by uswaretech
    I want to automoate some PPT - PDF conversions, so I want to run openoffice in headless mode for scripting. On my machine with X running I can start opemoffice in headless mode via soffice -accept="socket,port=8100;urp;" -headless This doesn't seem to work on a server with X not running. $ soffice -accept="socket,port=8100;urp;" -headless /usr/lib/openoffice/program/soffice.bin X11 error: Can't open display: Set DISPLAY environment variable, use -display option or check permissions of your X-Server (See "man X" resp. "man xhost" for details) $ The error doesnt seem to make sense as well, as the point of specifying -headless was so that I do not need X, while this command seems to look for X.

    Read the article

  • Virtualmin "Command to run after making changes to a server" differentiate between add/edit/delete

    - by Josh
    I'm using Virtualmin, and I have a command set up under Virtualmin Module Config Actions Upon Server and user creation Command to run after making changes to a server This command is designed to perform a few additional steps after the account is set up. However, the action is called every time the account is modified, and also gets called when the account is deleted. The actions it performs should only be done when the account is first created. How can my custom command know which action is being performed? Is there an environment variable which determines if the action is creation, alteration, or deletion?

    Read the article

  • Got Bus error (core dumped) when run the nova-compute from nova user

    - by Lafada
    I got error when I try to restart the nova-compute service on my compute node. [root@mycompute ~]# service nova-compute restart Stopping OpenStack Nova Compute Worker: [ OK ] Starting OpenStack Nova Compute Worker: [FAILED] I check in the log file /var/log/nova/nova-compute.log but nothing is logged in that file. Then I try to run the command with nova user. [root@mycompute ~]# su -s/bin/bash nova bash-4.1$ /usr/bin/nova-compute Bus error (core dumped) I check for this error on net but didn't get the link to where to check for this error.

    Read the article

  • Using watch to run a shell script - but the script goes defunct

    - by PHP-Steven
    So I want to keep an eye on my network connectivity so I can make a report for my ISP. (seems like the modem goes out for about 30-60 seconds about once a day) So I copied this handy little script http://www.cyberciti.biz/tips/simple-linux-and-unix-system-monitoring-with-ping-command-and-scripts.html And an running it with watch -n 15 ./ping-test.sh I have been testing it by pulling the plug on my modem. The first time watch runs the script after the network goes out it runs fine (sends some email) and then goes defunct. Once networking is restored the script "finishes" and then watch runs it again. So I'm getting mail for when the network goes down, but not how long it was down for. If I run the script straight from the command line it runs (emails) and then exits. Any ideas why? How can I get the script to keep running once the network is down?

    Read the article

  • Adobe Master Collection CS3 wont run on my Windows 7 64bit

    - by Jeremy
    I have a brand new HP p6230y. My first step after booting it up was to install Master Collection. It installs fine, but when I go to run each of the applications, and they all behave differently. I have re-installed twice already. Photoshop opens, but freezes. Acrobat tells me that I need to reinstall. Nothing else even opens (no freezing, no process in taskman). Any Ideas? HP p6230y RAM: 8gigs CPU: AMD Phenom2 x4 810 (2.6ghz) OS: Windows 7 Home Ultimate 64bit

    Read the article

  • MacPorts, how to run "post-destroot" script

    - by Potatoswatter
    I'm trying to install MacPorts gdb; it seems to be poorly supported… Running "port install" installs it to /opt/local/libexec/gnubin/gdb, but the intent doesn't seem to be to add that to $PATH. The portfile doesn't define any parameters for port select which is typically used to set a MacPorts installation to handle default Unix commands. But it does include these lines: foreach binary [glob -tails -directory ${destroot}${prefix}/bin g*] { ln -s ${prefix}/bin/${binary} ${destroot}${prefix}/libexec/gnubin/[string range $binary 1 end] } This is buried under an action labeled post-destroot. destroot is a MacPorts command but post-destroot is not. The script is apparently not run by port install or port activate, or if it's failing it's doing so silently. Is there a better approach than creating the links manually?

    Read the article

  • Free Windows traffic monitor that can run a command when reaching a limit

    - by leromarinvit
    Does anyone know a free traffic monitor tool for Windows XP which can run a configurable program when reaching a limit? Hoo Net Meter and DU Meter can do that, but they both cost money. What I'm trying to do is throttle the connection when getting close to the monthly limit, so that watching YouTube or downloading large files isn't fun any longer, but e-mail or looking something up still work. The throttling part is settled, Traffic Shaper XP works nicely. I just need something to automatically call a batch script when reaching the limit.

    Read the article

  • Properties!Details (run-time length)

    - by user33666
    When you take clips and turn them into computer playable files, whether .TS or .MOV or .MPG, .MP4, .VOB, etc., do you as the producer actually manually write into some field in a "Details" section of your video editor what the video length is, so that it can be read by the eventual user's video player? Or is this activity performed automatically by the video editor? I'm asking because: when a mouse is passed over a file line item in Windows 7 Shell (Windows Explorer) a little box is displayed where the mouse meets the file line item and provides simple name and size properties, one of which (if it's a media file) is run length. How does that figure get there into the file (later to be read be Windows or OS X)? Thanks for any info.

    Read the article

  • Run a pc on battery for 3 days?

    - by Zen 8000k
    I am looking for a low power, low end pc able to run 24/7 without overheating and a way to support it in case of power failure. Power failures can be up to 72 hours. The pc dosen't need a monitor or keyboard. A modem must also be protected in case of power failure. When i say low end, i don't mean crap. The cpu needs to be x86 and have at least 1k cpu in this chart: http://www.cpubenchmark.net/index.php What's the best way to do this?

    Read the article

  • Apache Unclean shutdown of previous apache run

    - by Jakub Arnold
    I'm having problem with running Apache2.2 on my Vista machine. When I clean install Apache it works just fine, but after I installed PHP, I'm getting this error message in logs. [Fri Oct 23 21:29:02 2009] [warn] pid file C:/Dev/Apache2.2/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run? Apache service was stopped when installing PHP. I did only one shutdown before instalation via Apache Service Monitor. Deleting httpd.pid and starting again doesn't help. I even tried to lookup process with PID in that file, but there is no such process.

    Read the article

  • I can't run uwsgi as normal user

    - by atomAltera
    I want to run uwsgi server as www user, but if I write: uwsgi --socket $SOCKET --chmod-socket 666 --pidfile $PIDFILE --daemonize $LOGFILE --chdir $CHDIR --pp $PYTHONPATH --module main --post-buffering 8192 --workers 1 --threads 10 --uid www --gid www A socket creation error occurs: Log: 1 *** Starting uWSGI 1.4.1 (64bit) on [Mon Dec 10 22:15:23 2012] *** 2 compiled with version: 4.4.5 on 17 November 2012 23:31:14 3 os: Linux-2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 4 nodename: autoblog 5 machine: x86_64 6 clock source: unix 7 pcre jit disabled 8 detected number of CPU cores: 2 9 current working directory: / 10 writing pidfile to /tmp/uwsgi_mysite.pid 11 detected binary path: /usr/local/bin/uwsgi 12 setgid() to 1002 13 set additional group 1004 (files) 14 setuid() to 1002 15 *** WARNING: you are running uWSGI without its master process manager *** 16 your memory page size is 4096 bytes 17 detected max file descriptor number: 1024 18 lock engine: pthread robust mutexes 19 unlink(): Operation not permitted [core/socket.c line 109] 20 bind(): Address already in use [core/socket.c line 141]

    Read the article

  • How to run adb command through a script

    - by Outride
    As the title says, I'm trying to find how to run adb commands through a pre-written script (such as how .bat and .vbs files work) so I can make a semi automatic program to pull some files from my android phone whenever I click on the launch.bat which launches a line of program to go through the phone and find certain files. I know the script line: adb pull /data/data/kik.android/databases/ %drive%\All\Database This copies all the files in this specific database into the flash drive's folder "Database" under the "All" folder. But, how could i make it so that the adb program looks through the phone and finds other files, and how could i pull the specific files, rather than pulling the entire folder?

    Read the article

  • How to see when stored procedures have last run

    - by Brandon Moore
    I want to see a listing of all the stored procs for each database on a server along with when the last time that store proc was run. I'm pretty good with SQL but I don't know about looking at stats like this that sql keeps so I'd appreciate a little help finding this info. EDIT: From the answers I'm getting it sounds like this is not possible the way I thought it would be. I was thinking that it could be done similarly to how you can see when a table was last accessed: select t.name, user_seeks, user_scans, user_lookups, user_updates, last_user_seek, last_user_scan, last_user_lookup, last_user_update from sys.dm_db_index_usage_stats i JOIN sys.tables t ON (t.object_id = i.object_id) where database_id = db_id() The above script was stolen from a comment on http://blog.sqlauthority.com/2009/05/09/sql-server-find-last-date-time-updated-for-any-table/.

    Read the article

  • Run a MongoDB configuration server without 3GB of journal files

    - by Thilo
    For a production sharded MongoDB installation we need 3 configuration servers. According to the documentation "the config server mongod process is fairly lightweight and can be ran on machines performing other work". However, in the default configuration, they all have journalling enabled, and with preallocation this takes up 3 GB of disk space. I assume that the actual data and transaction volume of a config server is quite small, so that this seems a bit too much. Is there a way to (safely!) run these config servers with much less disk use for the journal? Do I need journalling at all on config servers? Can I set the journal size to be smaller?

    Read the article

  • Cannot run SSH or send commands to /etc/init.d/ssh

    - by ThinkBohemian
    When I attempt to execute any commands such as /etc/init.d/ssh restart or /etc/init.d/ssh start, I get no output. It just goes to the next command line (Ubuntu Hardy). I can even pass in junk parameters such as /etc/init.d/ssh asldkfjalskfdj and i get no warnings or error messages, it just goes to the next line. I can check in my processes: lsof -i :22 and don't see my ssh process. I also don't see my SSH process when i run: netstat -na --inet Any troubleshooting suggestions?

    Read the article

  • Opscode Chef nginx compile from source issue reports successful run but does nothing

    - by v_abhi_v
    I am trying to install nginx from source in Opscode Chef and its bit weird, it runs complaining nothing but does not install it either. This is how my role attributes look like looks like "nginx":{ "default_site_enabled":false, "version":"1.2.6", "init_style":"init", "install_method":"source", "configure_flags":[ "--without-http_access_module", "--without-http_auth_basic_module", "--without-http_autoindex_module", "--without-http_browser_module", "--without-http_charset_module", "--without-http_fastcgi_module", "--without-http_memcached_module", "--without-http_referer_module", "--without-http_scgi_module", "--without-http_split_clients_module" ], "log_dir":"/var/log/nginx", "binary":"/opt/nginx/sbin/nginx", "source":{ "prefix":"/opt/nginx/dist", "modules":["http_ssl_module", "http_gzip_static_module" ] } }, The chef log shows: [2012-12-19T02:37:44+00:00] INFO: Processing bash[compile_nginx_source] action run (nginx::source line 82) [2012-12-19T02:37:45+00:00] INFO: bash[compile_nginx_source] ran successfully I am clueless on what's going on :(

    Read the article

  • How to run MS C++ 6.0 on Windows 7

    - by hotei
    I have MS Windows C++ version 6.0 on XP. I'd like to move it to a Windows 7 platform but when I try to install it there I get some garbage about it not being compatible, proceed at your own risk etc. When I proceed, it (not surprisingly) doesn't work. Is there a way to convince these Microsoft tools to play nice with each other? I have Win7 home edition, but I would be willing to upgrade to Win7 Pro IF I knew it would work under the "XP emulation" mode. Failing both those options, what is the least expensive "upgrade" path for C++? I don't need a bunch of other junk, just the C++ compiler. The goal is to retire my XP system since currently the only reason I keep it is to compile C++ programs that eventually are run under Win7. Thanks, Hotei

    Read the article

  • Run Logstalgia on Remote Global Apache Log On a WHM System

    - by macinjosh
    I work for a small web development shop. We have a dedicated Linux server running WHM. For fun we want to run Logstalgia on a machine in our office. We'd really like it to display information about all the traffic on our server. Logstalgia use Apache's access logs to generate its visuals, the problem I have is that by default WHM does not have an access log for all sites combined. How can I safely configure our server to output a combined/global Apache access log in a place accessible by a non-root SSH user? I am also concerned that this file could get quite large so I think I'd also need to know how to have it automatically shed old information. To make things more interesting I'm a programmer not a sys admin so not everything is immediately obvious to me.

    Read the article

  • Configuring Notepad++ to run knitr2pdf

    - by Stat-R
    Sorry for such a basic question but since I do not have a degree in programming... I am a user of R, knitr and Notepad++. I was trying to configure Notepad++ to run pdflatex and knitr(knit2pdf). By googling I found how to do it for pdflatex but I did not find anything for sweave/knitr. The following are the good ones for pdflatex http://www2.sofi.su.se/~mbe/docs/npp_r_latex.pdf http://www.tlhiv.org/ma497/software/ I inserted cmd /c cd /d "$(CURRENT_DIRECTORY)" && pdflatex.exe -shell-escape "$(FILE_NAME)" into the runrun menu in Notepad++. I do not fully understand the command though. I will appreciate any help on this. Please direct me if you can to any resource for learning these commands. I will be grateful to get any help in configuring Notepad++ for running knitr.

    Read the article

  • Getting FC11 to run under VMware Server, converted from physical machine

    - by Kristian
    I have a FC11 installation that I have converted to a VMware disk image to run om my VMware Server. I converted it with qemu-img, as the VMware Converter software apparently only converts Linux hosts to VMware Infrastructure servers. The disk image boots fine (grub is loaded and boots the kernel) but it seems like the disk is not found by the kernel, and the boot process stalls. Hotplugging USB devices work (the kernel prints debug information) and I'm able to press keys (Ctrl-Alt-Delete for instance). The VMware guest OS is set to RedHat Enterprise Linux 5 (32 bit), and I have tried both the LSI Logic, LSI Logic SAS and VMware Accelerated SCSI SCSI controllers, to no avail. I'm able to boot an installer disk and get into rescue mode and mount the filesystem, so my question is, what do I need to do to the guest kernel / initrd image to make it recognize the virtual disk?

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >