Search Results

Search found 5135 results on 206 pages for 'sbs 2003'.

Page 41/206 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • Bare bones backup / restore for single Win 2003 server

    - by s.mihai
    I have a single server, Win 2003 Server and would like to setup a system to be able to perform a bare bones restore if needed. (just plug in a cd or smth and get everything back). Ideally the backup could be performed while the is powered so that i don't have to support downtime during this, and in order to restore i would reboot and use some sort of liveCD Any ideas on this, software and all... ? (backup will be done to a remote FTP server with plenty of bandwidth).

    Read the article

  • Adding operation in middle of complex sequence diagram in visio 2003

    - by James
    I am using Microsoft Visio 2003 to define static classes with operations/methods and a sequence diagrams referring to these classes. The sequence diagram is almost done, but i realized that i missed one operation in middle of the diagram. When i try to move rest of the sequences down by selecting it as a block, all the operations in the block loose link with static diagrams. ( Methods which were referred to static classes as fun(), became fun, which means that now they no longer refer to static diagrams and any future changes would not be reflected in dynamic sequence diagrams automatically.) The sequence diagrams have grown to A3 size paper and i have many of such diagrams which needs correction. Manually moving the operations one by one would involve lots of effort. Could someone kindly suggest a way to overcome this problem?

    Read the article

  • Fax in Small Business Server 2003 fails to hang up

    - by Tim Anderson
    We have a problem with fax in SBS 2003. External modem, Courier v Everything which is a recommended model. It receives a fax OK, but then sometimes (quite often) fails to hang up. Attempts to send faxes thereafter get an engaged tone. The only fix when this happens is to reset the fax modem. Even restarting the server is not enough. We've tried with a different model modem, same problem. Any ideas? Tim

    Read the article

  • Server 2003 RAS Server Utilising High WAN Traffic

    - by Joe Sergeant
    We have Routing and Remote Access configured on Server 2003 (also our primary domain controller), allowing users to connect in remotely to access files, email, etc. With one user, the RAS Server is constantly sending data to that user's remote computer. From 9am this morning it has transferred almost 800MB. The user isn't transferring any files remotely, certainly not enough to total 800MB anyway. None of the other remote users have had this issue. We have ensured that the user in question has "Use default gateway on remote network" disabled for both IPv4 and IPv6 and we are fairly confident that Offline Files isn't trying to synchronise with the server remotely, too. My question is two-fold. Firstly, has anyone had a similar experience? Secondly, what would be the best software to discover exactly what data is being sent to the remote user?

    Read the article

  • IIS 6 Ram Allocation on Windows Server 2003

    - by chris
    0 down vote favorite share [g+] share [fb] share [tw] I have my IIS 6 running my website. It is on a Windows Server 2003 which has 4GB of RAM. I run SQL intensive code after the user submits a form (math statistics stuff). This process is not threaded (should it be, especially if 2 or more users run the same thing?). But my process seems to consume only a couple of GBs of memory and the server crawls. How do I get my IIS process to use nearly all the memory? I see on other sites that its 2GB or 3GB allocated using boot.ini. But is there another way for the process to use memory? If I make it multithreaded, will there be a process for each thread?

    Read the article

  • Password recovery of a Windows 2003 DNS server.

    - by KronoS
    I'm not going to lie, I feel like an idiot and would probably downvote this myself if I could, but here's my problem. I've just setup a Windows 2003 server as the DNS/AD for a replace of an old server. However, it appears that I don't know the password for the Administrator account. I entered the password and I setup the role, but apparently what I remember/wrote down and what I typed in are different. How do I recover a password? I can't log-on locally as it will only allow to log-on to the newly created domain.

    Read the article

  • Windows Server 2003 Router, Good approach [closed]

    - by jM2.me
    Possible Duplicate: Windows Server 2003 Router with PortForwarding Situation We have Verizon Fios 25/25 Internet Connection, Server acting as a router, and around 12 office computers. Task Portforward port 29000 from office computer. Problem Once I connected wan and lan cables I just had to set static lan ip (on server) and plug in switch with office computers into second nic. Then just right click on wan nic and select share internet connection. All office computers were assigned with an IP address 192.168.0.XXX and Gateway 192.168.0.1 (server). Now I have to open port and portfoward it from computer 192.168.0.190 (static ip, manual). Using this guide http://www.rosscode.com/blog/index.php?title=port_forwarding_in_windows_2003&more=1&c=1&tb=1&pb=1 I faced a problem. Before enabling "RRA" I had to unshare internet connection (wan interface) and was able to setup network. Now how do I setup a network within "RRA" and share internet with private network? Thank you much

    Read the article

  • Windows Server 2003: Nat Port Forwarding Not Working

    - by jM2.me
    The setup is following: Internet (108.99.XXX.XX) <- Windows Server 2003 (10.0.0.1) <- Switch <- Office Computers (10.0.0.100-200 some static routes some manual some automatic) Windows Server has NAT installed on it and two network interfaces are configured properly. The problem is, whenever I try to forward port 80 (or any other) from office computer (lets say 10.0.0.100), it fails. Nic #1 Settings: All settings are obtained from ISP Nic #2 Settings: Set manually IP: 10.0.0.1 Mask: 255.255.255.0 Nat Server is configured to automatically assign IP addresses to private network. Settings are: IP: 10.0.0.0 Mask: 255.255.255.0 Forwarding was done in Routing and Remote Access (local) - IP Routing - NAT/Basic Firewall - Local Area Connection (right click_properties) - services and ports - Web Server HTTP - Private Address: 10.0.0.100 SO what is causing the problem of failure to forward any port from other computer inside private network?

    Read the article

  • join ZFS/Solaris to windows AD 2003/2008 domain

    - by user95587
    I have a client trying to join his newly updated ZFS/Solaris box to my Windows AD 2003/2008 domain. Here is the command he is using and the error he is getting; Console: root@xxx:/etc/inet# smbadm join -u USER DOMAIN After joining DOMAIN the smb service will be restarted automatically.Would you like to continue? [no]: yes Enter domain password: Joining DOMAIN ... this may take a minute ... failed to join DOMAIN: UNSUCCESSFUL Please refer to the system log for more information. From /var/adm/messages: Sep 22 10:12:00 xxx smbd[593]: [ID 702911 daemon.error] smbrdr_exchange[116]: failed (-3) Sep 22 10:12:01 xxx smbd[593]: [ID 232655 daemon.notice] ldap_modify: Insufficient access Sep 22 10:12:01 xxx smbd[593]: [ID 898201 daemon.notice] Unable to set the TRUSTED_FOR_DELEGATION userAccountControl flag on the machine account in Active Directory. Please refer to the Troubleshooting guide for more information. Sep 22 10:12:01 xxx smbd[593]: [ID 526780 daemon.notice] Failed to establish NETLOGON credential chain Sep 22 10:12:01 xxx smbd[593]: [ID 871254 daemon.error] smbd: failed joining DOMAIN (UNSUCCESSFUL)

    Read the article

  • Group Policy for Setting Passwords: Server 2003 Domain

    - by user1236435
    In my 2003 domain, I am being requested to set a password policy to require passwords to expire every 4 months, and also require users to change their password on their next login, due to a security issue. In my domain, my OU's are setup by location, then drilled down to city, then the users and computers are in separate sub-domains. My question is, how do I set this up for my domain? Will I need to set the policy up for loop back? Can I configure this for just a specific OU? Any suggestions on how to move forward? Any advise is much appreciated, and thanks in advance!

    Read the article

  • Free firewall for Windows Server 2003

    - by n00b_Admin
    We have a Windows Server 2003 R2 Machine here at work that I need to ensure is accessible only from specific set of IP Addresses. The Server is on a LAN and I am aware that one of the possible solutions maybe limit access to the Server's VLAN. However that is not feasible at the moment. I've been searching for a firewall that could do this, Windows' Firewall is pretty limited and I don't see an option in it to limit incoming data based on Source IP addresses. Most free firewalls like Comodo and ZoneAlarm don't work on Windows Server. Any ideas on how to accomplish this would be of great help. Thanks in advance.

    Read the article

  • Windows Server 2003 R2 SIS Groveler start error

    - by 2040techman
    Hi I have a Windows Server 2003 R2 SP2 running and I need to have a WDS with mixed mode so I can deploy Windows 7 & Windows XP images. I went to setup the first image and after the wizard was done copying the correct files I got: Single Instance Storage Groveler: Service did not start (or something like that). I checked event viewer and got this: Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7023 Date: 3/26/2012 Time: 7:03:21 PM User: N/A Computer: SERVER2 Description: The Single Instance Storage Groveler service terminated with the following error: The service has not been started. This server is needed very soon because we just got a shipment of several Windows XP capable laptops and need to deploy Windows XP over PXE and this is keeping us from proceeding. Any help is great!!!

    Read the article

  • Server 2008 Hard Faults

    - by claw
    Hey all, plase bear with me as I haven't looked at a server in a very long time. The problem I am having is with a Windows 2008 Standard FE Service Pack 2 Intel Xeon X3430 @ 2.40 2.39 GHZ 4 GB Memory 64 Bit There seems to be no problems other than the physical memory peaking at 91%, always with over 100 Hard Faults Per Second. To my understanding hard faults should be fairly rare on a machine with. Are there any logs I can show you? Or investigate myself. The general performance of the machine is ok, i can access SBS2008 and change settings fairly smoothly without hangs etc. However, we connect to the server and do quite a bit of SQL via an application. For a record to retrieve say 20 rows, it can take 20+ seconds. Thanks in advance, Jamie EDIT: What the server is used for: IIS ASP Web Service SQL 2008 List item Exchange unable to upload screenshots due to low reputation - why doesnt my SO work here :)

    Read the article

  • Permissions won't cascade more than 1 level

    - by Jovin_
    Running Windows Small Business Server 2011 I have a file structure with a lot of sub folders (sometimes 5-6 levels deep). I have created access groups to grant access to my users, and also deny groups to deny access to others. X Access & X Deny. These allow or deny access to a mapped network drive X: On the server I put in the groups with Full Control Allow for X Access and Full Control Deny for X Deny, I also tick the box "Apple these permissions to objects and/or containers within this container only" and have ensured that "Apply to:" is "This folder, subfolders and files". But for some reason the permissions will only apply to the next level of folders & files. ex. structure: X: Folder 1 Folder 1a Folder 2 Folder 2a If I apply the permissions to X: it'll only go to Folder 1 & 2, not 1a and 2a, I then need to manually apply the permissions to these too. Is this working as intended or am I doing something wrong?

    Read the article

  • Server 2008 Hard Faults

    - by claw
    Hey all, plase bear with me as I haven't looked at a server in a very long time. The problem I am having is with a Windows 2008 Standard FE Service Pack 2 Intel Xeon X3430 @ 2.40 2.39 GHZ 4 GB Memory 64 Bit There seems to be no problems other than the physical memory peaking at 91%, always with over 100 Hard Faults Per Second. To my understanding hard faults should be fairly rare on a machine with. Are there any logs I can show you? Or investigate myself. The general performance of the machine is ok, i can access SBS2008 and change settings fairly smoothly without hangs etc. However, we connect to the server and do quite a bit of SQL via an application. For a record to retrieve say 20 rows, it can take 20+ seconds. Thanks in advance, Jamie EDIT: What the server is used for: IIS ASP Web Service SQL 2008 List item Exchange unable to upload screenshots due to low reputation - why doesnt my SO work here :)

    Read the article

  • Changing Internet connection on ISA Server 2000

    - by garyb32234234
    Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

    Read the article

  • SBS2011 Detailed Network Report

    - by HaydnWVN
    I have configured an SBS2011 Server to e-mail me a weekly 'Detailed Network Report' (saw it while configuring a daily e-mailed Back Up report). Within the Report there is lots of info regarding all the Roles on the server (Security, Updates, Back Up etc). Under E-Mail Usage and Mailbox Sizes the following is shown: Now I know these users are sending much more than 1 e-mail a week! So what exactly is this report showing? E-mails within the last 24 hours? How do I go about configuring the Report to show me e-mail statistics for the last week/day/whatever?

    Read the article

  • Windows Media Encoder object not created in ASP.NET on MS Server 2003 64 bit

    - by Ron
    Hello, I created (and used) a Windows Media Encoder object in Microsoft Visual C# 2008 Express Edition on MS Server 2003 64 bit. This worked fine. However, when I attempted to create the equivalent Windows Media Encoder object using Microsoft Visual Web Developer 2008 on MS Server 2003 64 bit, the following exception was thrown: "Retrieving the COM class factory for component with CLSID {632B606A-BBC6-11D2-A329-006097C4E476} failed due to the following error: 80040154." It cannot be that the component isn’t registered, because both have a reference to the same WMEncEng.dll file. The Microsoft Visual Web Developer 2008 code also worked fine on XP 32 bit. Could it be a problem with permissions? Regardless, anyone have any ideas why this problem is occurring and, more importantly, how to resolve it? Thank you. Here are the two code snippets from MS Server 2003 64 bit: Microsoft Visual Web Developer 2008 (did not work): using System; using WMEncoderLib; namespace TestWMEnc { public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { try { WMEncoder encoder = new WMEncoder(); //exception thrown // ... } catch (Exception err) { string exception = err.Message; } } } } Microsoft Visual C# 2008 Express Edition (worked fine): using System; using System.Windows.Forms; using WMEncoderLib; namespace testWMEncoder { public partial class Form1 : Form { public Form1() { InitializeComponent(); } private void button1_Click(object sender, EventArgs e) { try { WMEncoder encoder = new WMEncoder(); // ... } catch (Exception err) { string exception = err.Message; } } } }

    Read the article

  • Windows 2003 Domain Controller Very Upset about NIC Teaming

    - by Kyle Brandt
    I set up BACS (Broadcom Teaming) to team two NIC on a Windows 2003 Active Directory Domain Controller. Networking still works okay, I can ping the gateway etc, but both DNS and Active Directory fail to start with various 40xx errors. The team that I created is Smart load Balancing with Failover, with one backup and only one in smart load balancing (So really it is just failover). I have the team the same IP address that the single active NIC had before. Anyone seen this before, or have any ideas what the problem might be? Event Type: Error Event Source: DNS Event Category: None Event ID: 4015 Date: 3/7/2010 Time: 10:33:03 AM User: N/A Computer: ADC Description: The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error. Event Type: Error Event Source: DNS Event Category: None Event ID: 4004 Date: 3/7/2010 Time: 10:33:03 AM User: N/A Computer: ADC Description: The DNS server was unable to complete directory service enumeration of zone .. This DNS server is configured to use information obtained from Active Directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly and repeat enumeration of the zone. The extended error debug information (which may be empty) is "". The event data contains the error. Event Type: Error Event Source: NTDS Replication Event Category: DS RPC Client Event ID: 2087 Date: 3/7/2010 Time: 10:40:28 AM User: NT AUTHORITY\ANONYMOUS LOGON Computer: ADC Description: Active Directory could not resolve the following DNS host name of the source domain controller to an IP address. This error prevents additions, deletions and changes in Active Directory from replicating between one or more domain controllers in the forest. Security groups, group policy, users and computers and their passwords will be inconsistent between domain controllers until this error is resolved, potentially affecting logon authentication and access to network resources.

    Read the article

  • New Windows Server 2008 R2 WIMP running slower than Windows Server 2003

    - by starshine531
    We recently upgraded a WIMP server from Windows Server 2003 (32 bit) to Windows Server 2008 R2 (64 bit). The new server has significantly better hardware than the old server, yet many processes take much longer than the old box. We have a rather complex web application process that normally takes about 7 seconds on the old box, but on the new one it takes 11-12 seconds. That's down from 15.5 seconds it took before I disabled IPV6. This process involves some queries (some of them involve transactions with maybe 3 queries between the start and commit) and creating and emailing some pdfs. Windows updates are current with a more or less fresh machine. This happens consistently even when we have almost no traffic on the site and memory and cpu aren't being hard pressed at all. The only differences between the servers other than the OS and hardware: 1) When available, we used 64 bit versions of programs 2) The new server uses MySQL 5.5 rather than MySQL 5.1 (I did run the mysql_upgrade program and we use InnoDB for the engine) 3) The new server uses PHP Version 5.3.18 rather than PHP Version 5.3.1 4) With the new OS came IIS7 rather than IIS6 of course. What could be causing better hardware to run so much slower? Let me know if you need more details. Thank you.

    Read the article

  • Need to get SMTP server on MS Server 2003

    - by Matt Dawdy
    Long story short, client paid networking company to move their website in house. Now I have to figure out how to email out from their website even though they don't have an SMTP server. At least until I install one. Their email is hosted with Gmail right now (the client's domain through Google App for Your Domain). I changed my code to connect as one of their users "[email protected]" and send email. Worked great for about 12 hours. All of a sudden none of the automated emails are going out now, and google is sending the emails back saying that it is a permanent failure and Message Rejected. The link they direct me to, http://mail.google.com/support/bin/answer.py?answer=69585 is telling me that our emails look like spam. They aren't. They are emails we send to out clients about the status of their applications. Seriously, they are NOT spam. So...long story short is out the window, sorry...but I need to get an SMTP server setup inside their domain that I can send emails out of. This thing won't need to receive emails ever, and really only needs 1 email account customercare. What can I do? Will I have to have the networking company open a port in the firewall? Is there one built into Server 2003?

    Read the article

  • Word 2003 will not show up in Windows 7

    - by invadersil
    I just installed Windows 7 over the holiday and it went swimmingly well. Today I finished up a few things like installed MS Office 2003. That went well too, until I tried to open up Word. When I try to open up Word on its own, it comes up in the application bar but the application window does not show. I use Word as the editor in Outlook which does work. I also discovered that I can start it up in safe mode and it will work normally. But normal startup just doesn't show me anything. Oddly, if I start typing stuff while the app is selected in the app bar and then try to close it, it pops up a message asking if I want to save it. I tried running the compatibility utility within Windows 7 but still no dice. Has anybody seen this issue yet? The other Office apps start normally. Edit: More info: Windows 7 Pro 64-bit. Office is patched up to SP3. And last time I checked, there were no updates either (and fully updated with KBs after SP3) And I did a fresh install of Windows 7.

    Read the article

  • Terminal Server in Windows Server 2003

    - by Hemal
    I have a confusion regarding what I am doing here. At present I have a Windows Server 2003 server with SP2. I have assigned RAS/VPN server role to it (through Manage my server wizard) and in my router, I setup the IP address of my RAS/VPN server as PPTP server. Staff leave their workstations ON all the time and access them from home through RDP. They first connect thorugh VPN & in the RDC they simply type their respective IP or computer name to access the office network from home. Everything works fine so far except: Staff have to leave compuers always ON in the office Speed is very slow depend how many staff members access the VPN network I was told to install and configure Terminal service to improve this situation. I already added TS Role in the server but I don't know how to clients can access the TS server from home or remote location. I really appreciate any good links or guidence from the experts in this group regarding this. Thank you in advance for any replies!

    Read the article

  • issue in installing postgresql 9.3.4 on Windows server 2003 x64

    - by randydom
    Hello i really did all what i know to install the PostgreSQL 9.3.4 on my windows 2003 server x64, but i'm always stopped with this error : please see the error : http://oi57.tinypic.com/s4tb8i.jpg I really don't know what to do , if i click OK then when i go to the windows services list i don't find the PostgreSQL service so i can't Start the service . can any one please help me to install it correctly . PS: i've followed all steps in the : wiki.postgresql.org/wiki/Troubleshooting_Installation many thanks . here's the installer log * where i get " Failed to initialise the database cluster with initdb " : Called IsVistaOrNewer()... 'winmgmts' object initialized... Version:5.2 MajorVersion:5 Ensuring we can write to the data directory (using cacls): Executing batch file 'rad22ADE.bat'... processed dir: C:\Program Files\PostgreSQL\9.2\data Executing batch file 'rad22ADE.bat'... The files belonging to this database system will be owned by user "Administrator". This user must also own the server process. The database cluster will be initialized with locale "English_United States.1252". The default text search configuration will be set to "english". fixing permissions on existing directory C:/Program Files/PostgreSQL/9.2/data ... initdb: could not change permissions of directory "C:/Program Files/PostgreSQL/9.2/data": Permission denied Called Die(Failed to initialise the database cluster with initdb)... Failed to initialise the database cluster with initdb Script stderr: Program ended with an error exit code Error running cscript //NoLogo "C:\Program Files\PostgreSQL\9.2/installer/server/initcluster.vbs" "NT AUTHORITY\NetworkService" "postgres" "****" "C:\Program Files\PostgreSQL\9.2" "C:\Program Files\PostgreSQL\9.2\data" 5432 "DEFAULT" 0 : Program ended with an error exit code Problem running post-install step. Installation may not complete correctly The database cluster initialisation failed. Creating Uninstaller Creating uninstaller 25% Creating uninstaller 50% Creating uninstaller 75% Creating uninstaller 100% Installation completed Log finished 05/02/2014 at 04:04:04

    Read the article

  • Contacts in Outlook 2003/2007, some questions

    - by Ernst
    If I create a distribution list and then select members, can I see different fields than the default ones? In 2007 there are radio buttons for 'name only' and 'more columns', but the latter does seem to only result in no results at all, regardless of which address book I choose. In 2003 there is no such thing. Is there a plug in that will break up the recipients (whether they be to, cc, or bcc) in groups of X, and send then a number of mails as required? Our host allows only 50 recipients per mail and only 300 total recipients per 5 minutes. I know the email client blat has exactly this functionality, but it does not seem to be able to connect to the exchange server to get the contacts needed. Could I maybe set outlook to send to blat which then does the breaking up as necessary? Can I (or is there a plug in for this) export only part of the contacts instead of all of them? Note that we send mail outside our organisation via our web host where we've got a few mailboxes, and we use our exchange (2000) server only internally, the few people that can send email to the outside world have an external mailbox as well as their exchange account defined. I might be able to convince our general boss that we can simply give (some) people the ability to send outside via exchange, but I might just as well not succeed. Alternatively, is there another program that can connect to exchange to get the contacts (selected based on categories) and then send via smtp in groups with delays between the mails?

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >