Search Results

Search found 17476 results on 700 pages for 'static route'.

Page 41/700 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• Network Configuration

  - by Dario

  Hello, This is my situation: Router A: IP 192.168.1.1 Mask 192.168.1.0/24 - Connected to the internet. Server: - Interface eth0: inet addr:10.1.1.125 Mask:255.255.255.0 (connected to router B) - Interface ra0: inet addr:192.168.1.125 Mask:255.255.255.0 (connected to router A) Router B: IP 10.1.1.254 Mask 10.1.1.0/24 - Connected to Server's eth0 Computer: connected to Router B via WiFi connection. I configured a static route on Router B that use as default gateway 192.168.1.125 and i can ping that ip from computer. The problem is: how i can connect to the internet ? In other words, traffic coming from Server eth0 should use ra0 as gateway. Any suggestion ? Thank you

  Read the article

• How to forward connection from one interface to another under linux

  - by Daniel

  Hi, I have linux box which has two network interface, eth0, eth1. from eth1 I can access an internal website, say under port 8080. from outside the box, I can't access that network. my question is, is there a way I set up something so from outside the box, there appears to be a web server running in port 8080 and when I connect to it, it automatically forwards to eht1 the internal site? I tried to enable ip forward and add a static route, but it doesn't work. thanks.

  Read the article

• How to set which IP to use for a HTTP request?

  - by GetFree

  This is probably a silly question. I'm doing some http requests using wget from the command line, and I want those connections to be made through one specific IP of the 4 IPs my server has. Those http requests go to one specific range of IPs so I only want those to be routed differently. The 4 interfaces in my server are eth0, eth0:0, eth0:1, eth0:2. I tried with the following command: route add -net 192.164.10.0/24 dev eth0:0 But when I see the routing table it says: Destination Gateway Genmask Flags MSS Window irtt Iface 192.164.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 The interface is set to eth0 not eth0:0 as my command says. What am I doing wrong?

  Read the article

• How to reply some request from which routes its came from?

  - by tacoen

  I wonder if we can reply some request from which route its came from? My Situation is like this: eth0 192.168.10.1 --> gw: 192.168.10.254 nm: 24 eth1 192.168.11.1 --> gw: 192.168.11.254 nm: 24 Since this two IP is on the same machine, normally when we ping to 192.168.11.1 from 192.168.10.2. This machine will not reply to 192.168.10.2 because 192.168.10.0/24 it's on eth0, and the packets where requested via eth1. Can I make it works? I'm using Linux ubuntu, and the application will be listen to eth1 only.

  Read the article

• How to deal with redirect traffic in widows2003

  - by Huiyu

  I have set up an OpenVPN server on Windows 2003, and I want to route all client traffic through the VPN, so that my clients can connect to the Internet through the VPN server. In the server configuration, I added push "redirect-gateway def1". I know the server needs to be configured to deal with the traffic somehow: for example, on Linux, I can use iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE. The problem is, I don't know how to deal with the traffic on Windows Server 2003. Is there any way to accomplish this?

  Read the article

• Masquerade traffic from certain source IP to VPN connection

  - by Shuo Ran

  Network Setup: 10.0.0.1 Router: to internet 10.0.0.70 Server: Ubuntu based server,default gateway is 10.0.0.1 10.0.0.51 PC I created a PPTP connection(interface: ppp0) on Server to a machine on the internet, what I want to do is route all the traffic from certain IP address(10.0.0.51) through the PPTP connection and then to the internet. What I did are: Set the gateway on PC(10.0.0.51) as 10.0.0.70 Enabled ipv4 forward on 10,0,0,70 Add the masquerade rule to iptable: iptables -t nat -A POSTROUTING -o ppp0 -s 10.0.0.51 -j MASQUERADE After that, it seems none of the traffic from 10.0.0.51 be redirected to ppp0, instead these traffic are still going through 10.0.0.1 directly. Any thoughts on it?

  Read the article

• Linux router: ping doesn't route back

  - by El Barto

  I have a Debian box which I'm trying to set up as a router and an Ubuntu box which I'm using as a client. My problem is that when the Ubuntu client tries to ping a server on the Internet, all the packets are lost (though, as you can see below, they seem to go to the server and back without problem). I'm doing this in the Ubuntu Box: # ping -I eth1 my.remote-server.com PING my.remote-server.com (X.X.X.X) from 10.1.1.12 eth1: 56(84) bytes of data. ^C --- my.remote-server.com ping statistics --- 13 packets transmitted, 0 received, 100% packet loss, time 12094ms (I changed the name and IP of the remote server for privacy). From the Debian Router I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 7, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 8, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 8, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 9, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 9, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 10, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 10, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 11, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 11, length 64 ^C 9 packets captured 9 packets received by filter 0 packets dropped by kernel # tcpdump -i eth2 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth2, link-type EN10MB (Ethernet), capture size 65535 bytes IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 213, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 213, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 214, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 214, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 215, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 215, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 216, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 216, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 217, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 217, length 64 ^C 10 packets captured 10 packets received by filter 0 packets dropped by kernel And at the remote server I see this: # tcpdump -i eth0 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 1, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 1, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 2, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 2, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 3, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 3, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 4, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 4, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 5, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 5, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 6, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 6, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 7, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 7, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 8, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 8, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 9, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 9, length 64 18 packets captured 228 packets received by filter 92 packets dropped by kernel Here "X.X.X.X" is my remote server's IP and "Y.Y.Y.Y" is my local network's public IP. So, what I understand is that the ping packets are coming out of the Ubuntu box (10.1.1.12), to the router (10.1.1.1), from there to the next router (192.168.1.1) and reaching the remote server (X.X.X.X). Then they come back all the way to the Debian router, but they never reach the Ubuntu box back. What am I missing? Here's the Debian router setup: # ifconfig eth1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:d98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:105761 errors:0 dropped:0 overruns:0 frame:0 TX packets:48944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:40298768 (38.4 MiB) TX bytes:44831595 (42.7 MiB) Interrupt:19 Base address:0x6000 eth2 Link encap:Ethernet HWaddr 6c:f0:49:a4:47:38 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fea4:4738/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38335992 errors:0 dropped:0 overruns:0 frame:0 TX packets:37097705 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:4260680226 (3.9 GiB) TX bytes:3759806551 (3.5 GiB) Interrupt:27 eth3 Link encap:Ethernet HWaddr 94:0c:6d:82:c8:72 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3408 errors:0 dropped:0 overruns:0 frame:0 TX packets:3408 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:358445 (350.0 KiB) TX bytes:358445 (350.0 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:2767779 errors:0 dropped:0 overruns:0 frame:0 TX packets:1569477 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3609469393 (3.3 GiB) TX bytes:96113978 (91.6 MiB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth2 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth2 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Ubuntu box (on 10.1.1.12 and 192.168.1.12) Address HWtype HWaddress Flags Mask Iface 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.102 ether NN:NN:NN:NN:NN:NN C eth2 10.1.1.12 ether 00:1e:67:15:2b:f0 C eth1 192.168.1.86 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.2 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.40 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.12 ether 00:1e:67:15:2b:f1 C eth2 192.168.1.77 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.41 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.123 ether NN:NN:NN:NN:NN:NN C eth2 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 10.1.1.0/24 !10.1.1.0/24 MASQUERADE all -- !10.1.1.0/24 10.1.1.0/24 Chain OUTPUT (policy ACCEPT) target prot opt source destination And here's the Ubuntu box: # ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f1 inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28785139 errors:0 dropped:0 overruns:0 frame:0 TX packets:19050735 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32068182803 (32.0 GB) TX bytes:6061333280 (6.0 GB) Interrupt:16 Memory:b1a00000-b1a20000 eth1 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f0 inet addr:10.1.1.12 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:285086 errors:0 dropped:0 overruns:0 frame:0 TX packets:12719 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30817249 (30.8 MB) TX bytes:2153228 (2.1 MB) Interrupt:16 Memory:b1900000-b1920000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:86048 errors:0 dropped:0 overruns:0 frame:0 TX packets:86048 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11426538 (11.4 MB) TX bytes:11426538 (11.4 MB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.1.1.1 0.0.0.0 UG 100 0 0 eth1 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.8.0.0 192.168.1.10 255.255.255.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Debian box (on 10.1.1.1 and 192.168.1.10) Address HWtype HWaddress Flags Mask Iface 192.168.1.70 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.97 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.103 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.13 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.120 (incomplete) eth0 192.168.1.111 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.51 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.102 (incomplete) eth0 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.74 (incomplete) eth0 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.121 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.71 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.88 (incomplete) eth0 192.168.1.82 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.98 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.73 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.11 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.85 (incomplete) eth0 192.168.1.112 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.81 ether NN:NN:NN:NN:NN:NN C eth0 10.1.1.1 ether 94:0c:6d:82:0d:98 C eth1 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.10 ether 6c:f0:49:a4:47:38 C eth0 192.168.1.86 (incomplete) eth0 192.168.1.119 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth1 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth0 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination Edit: Following Patrick's suggestion, I did a tcpdump con the Ubuntu box and I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 1, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 1, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 2, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 2, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 3, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 3, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 4, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 4, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 5, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 5, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 6, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 6, length 64 ^C 12 packets captured 12 packets received by filter 0 packets dropped by kernel So the question is: if all packets seem to be coming and going, why does ping report 100% packet loss?

  Read the article

• Tuning Linux IP routing parameters -- secret_interval and tcp_mem

  - by Jeff Atwood

  We had a little failover problem with one of our HAProxy VMs today. When we dug into it, we found this: Jan 26 07:41:45 haproxy2 kernel: [226818.070059] __ratelimit: 10 callbacks suppressed Jan 26 07:41:45 haproxy2 kernel: [226818.070064] Out of socket memory Jan 26 07:41:47 haproxy2 kernel: [226819.560048] Out of socket memory Jan 26 07:41:49 haproxy2 kernel: [226822.030044] Out of socket memory Which, per this link, apparently has to do with low default settings for net.ipv4.tcp_mem. So we increased them by 4x from their defaults (this is Ubuntu Server, not sure if the Linux flavor matters): current values are: 45984 61312 91968 new values are: 183936 245248 367872 After that, we started seeing a bizarre error message: Jan 26 08:18:49 haproxy1 kernel: [ 2291.579726] Route hash chain too long! Jan 26 08:18:49 haproxy1 kernel: [ 2291.579732] Adjust your secret_interval! Shh.. it's a secret!! This apparently has to do with /proc/sys/net/ipv4/route/secret_interval which defaults to 600 and controls periodic flushing of the route cache The secret_interval instructs the kernel how often to blow away ALL route hash entries regardless of how new/old they are. In our environment this is generally bad. The CPU will be busy rebuilding thousands of entries per second every time the cache is cleared. However we set this to run once a day to keep memory leaks at bay (though we've never had one). While we are happy to reduce this, it seems odd to recommend dropping the entire route cache at regular intervals, rather than simply pushing old values out of the route cache faster. After some investigation, we found /proc/sys/net/ipv4/route/gc_elasticity which seems to be a better option for keeping the route table size in check: gc_elasticity can best be described as the average bucket depth the kernel will accept before it starts expiring route hash entries. This will help maintain the upper limit of active routes. We adjusted elasticity from 8 to 4, in the hopes of the route cache pruning itself more aggressively. The secret_interval does not feel correct to us. But there are a bunch of settings and it's unclear which are really the right way to go here. /proc/sys/net/ipv4/route/gc_elasticity (8) /proc/sys/net/ipv4/route/gc_interval (60) /proc/sys/net/ipv4/route/gc_min_interval (0) /proc/sys/net/ipv4/route/gc_timeout (300) /proc/sys/net/ipv4/route/secret_interval (600) /proc/sys/net/ipv4/route/gc_thresh (?) rhash_entries (kernel parameter, default unknown?) We don't want to make the Linux routing worse, so we're kind of afraid to mess with some of these settings. Can anyone advise which routing parameters are best to tune, for a high traffic HAProxy instance?

  Read the article

• Serve static media on "nginx"

  - by MMRUSer

  My django application hosted on Apache, and now I want to serve its static media through nginx, I don't have any prior experience in nginx...plus currently the static media is serve through Apache.. expecting some helping hand. Apache 2.2 mod_wsgi nignx-0.7.65 Django 1.1.1 Thanks..

  Read the article

• What are the "static" elements of a website?

  - by Lazer

  While loading stackoverflow.com ... waiting for sstatic.net While loading vark.com ... waiting for static.varkimg.com Is there some trend here? When it says "static", what all elements of the site are being loaded?

  Read the article

• SSH into Ubuntu Linux on a box without a static IP address

  - by Steven Xu

  Basically, how do I do it? I'd like to connect to my home computer from work, but my internet is routed through my apartment building's network, so I don't have the static IP address I'm accustomed to having. How do I go about accessing my home computer through SSH (I'll be using Putty at work if it matters) if my home computer doesn't have a static IP address?

  Read the article

• Providing a static IP for resources behind AWS Elastic Load Balancer (ELB)

  - by tharrison

  I need a static IP address that handles SSL traffic from a known source (a partner). Our servers are behind an AWS Elastic Load Balancer (ELB), which cannot provide a static IP address; many threads about this here. My thought is to create an instance in EC2 whose sole purpose in life is to be a reverse proxy server having it's own IP address; accepting HTTPS requests and forwarding them to the load balancer. Are there better solutions?

  Read the article

• Obtaining a DHCP IP address if static address is not available

  - by user142485

  I have seen some questions that are similar to my problem but not a good solution. Ex. User has a laptop and has a static IP address at the office. They also take the laptop off site where they also need internet. Is there a way to configure their computer so that it will obtain an IP address automatically when the configured static address is not available (without making the user go into network configuration and changing to obtain automatically)?

  Read the article

• mirror a site with wget and download static media

  - by mountainswhim

  I'd like to mirror a site with wget and convert all the links to the local copies I've downloaded. So far that's easy all I have to do is wget -mk http://site.com However all of the static media is located in a different domain, if I follow all of the foreign hosts using the -H option it will download that static media files, but it will also download anything else externally linked. Is there a way to specify 'only download foreign hosts specified in list X'?

  Read the article

• debian lenny : problem modifying static ip

  - by supertiti

  hello all, i'm trying to change a static ip assigned to a debian VM. I modified the /etc/network/interfaces file but my debian doesn't seem to like the new settings currently the machine's ip is set to 192.168.1.136 and i want the machine's ip to be set to 192.168.1.8 here's my modified /etc/network/interfaces : auto lo iface lo inet loopback allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.1.8 gateway 192.168.1.1 netmask 255.255.255.0

  Read the article

• setting up static ip on linux

  - by user64908

  I understood the interface file in linux needs to be edited and the corresponding lines added. I don't understand what network and broadcast are for, it seems extra versus a windows static ip configuration. In my case my gateway is 192.168.5.1 and my machine ip is 192.168.5.101, what would be my network and broadcast address, is the below correct and what exactly do they mean? iface eth0 inet static address 192.168.5.101 gateway 192.168.5.1 netmask 255.255.255.0 network 192.168.5.0 broadcast 192.168.5.255

  Read the article

• Static IP question

  - by blade

  If I want to set a static IP for my AD DS, do I need an ISP which provides this facility? Also, if my VMS also need a static IP, would this have to be another IP or can it be the same? (I know this sounds a bit noobish). Thanks

  Read the article

• Help analyzing traceroute

  - by Abdulla

  Hello, my name is Abdulla and I'm from Kuwait. Sorry for my question as I know its not technically challenging. I'm facing some problems with my internet connection. My company has a DSL 2mb connection. My main problem is latency, in the morning its good but after that its gets really bad. My Internet provider says there's nothing wrong and that everything is working perfectly. I tried to explain to them the latency issue but they say that as long as I'm getting the download speed there isn't anything I can do about it. I only want to know if this is true and that the company can't do anything before I change my internet provider, as I feel that the guys at the contact center might getting back to me without asking tech support. Below are 2 traces I made, one in the morning and the other in the afternoon: This was taken around 17:00 Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=387ms TTL=49 Reply from 66.102.9.104: bytes=32 time=388ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 375ms, Maximum = 388ms, Average = 381ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=376ms TTL=49 Reply from 66.102.9.104: bytes=32 time=382ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=378ms TTL=49 Reply from 66.102.9.104: bytes=32 time=374ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=366ms TTL=49 Reply from 66.102.9.104: bytes=32 time=353ms TTL=49 Reply from 66.102.9.104: bytes=32 time=331ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=348ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=346ms TTL=49 Reply from 66.102.9.104: bytes=32 time=335ms TTL=49 Reply from 66.102.9.104: bytes=32 time=340ms TTL=49 Reply from 66.102.9.104: bytes=32 time=344ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=328ms TTL=49 Reply from 66.102.9.104: bytes=32 time=332ms TTL=49 Reply from 66.102.9.104: bytes=32 time=326ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=325ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=338ms TTL=49 Reply from 66.102.9.104: bytes=32 time=341ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 26, Received = 26, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 325ms, Maximum = 382ms, Average = 348ms Control-C ^C C:\Documents and Settings\Administrator>travert google.com 'travert' is not recognized as an internal or external command, operable program or batch file. C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 7 ms 7 ms 8 ms 168.187.0.226 4 7 ms 8 ms 9 ms 168.187.0.125 5 180 ms 187 ms 188 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 209 ms 222 ms 204 ms 195.219.167.57 7 541 ms 536 ms 540 ms 195.219.167.42 8 553 ms 552 ms 538 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 547 ms 543 ms 542 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 540 ms 523 ms 531 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 755 ms 761 ms 695 ms ae-45-45.ebr1.London1.Level3.net [4.69.143.101] 12 271 ms 263 ms 400 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 701 ms 730 ms 742 ms 195.50.118.210 14 659 ms 641 ms 660 ms 209.85.255.76 15 280 ms 283 ms 292 ms 209.85.251.190 16 308 ms 293 ms 296 ms 72.14.232.239 17 679 ms 700 ms 721 ms 64.233.174.18 18 268 ms 281 ms 269 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator> This was taken at 10:00am Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=120ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 110ms, Maximum = 120ms, Average = 113ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=116ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=113ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 32, Received = 32, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 109ms, Maximum = 135ms, Average = 112ms Control-C ^C C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 8 ms 7 ms 6 ms 168.187.0.226 4 6 ms 7 ms 7 ms 168.187.0.125 5 20 ms 20 ms 18 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 171 ms 205 ms 215 ms 195.219.167.57 7 191 ms 215 ms 226 ms 195.219.167.42 8 * 103 ms 94 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 94 ms 95 ms 97 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 94 ms 94 ms 94 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 101 ms 101 ms 101 ms ae-48-48.ebr1.London1.Level3.net [4.69.143.113] 12 102 ms 102 ms 101 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 103 ms 102 ms 103 ms 195.50.118.210 14 137 ms 103 ms 100 ms 209.85.255.76 15 130 ms 124 ms 124 ms 209.85.251.190 16 114 ms 116 ms 116 ms 72.14.232.239 17 135 ms 113 ms 126 ms 64.233.174.18 18 126 ms 125 ms 127 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator>

  Read the article

• Difference between Singleton implemention using pointer and using static object

  - by Anon

  EDIT: Sorry my question was not clear, why do books/articles prefer implementation#1 over implementation#2? What is the actual advantage of using pointer in implementation of Singleton class vs using a static object? Why do most books prefer this class Singleton { private: static Singleton *p_inst; Singleton(); public: static Singleton * instance() { if (!p_inst) { p_inst = new Singleton(); } return p_inst; } }; over this class Singleton { public: static Singleton& Instance() { static Singleton inst; return inst; } protected: Singleton(); // Prevent construction Singleton(const Singleton&); // Prevent construction by copying Singleton& operator=(const Singleton&); // Prevent assignment ~Singleton(); // Prevent unwanted destruction };

  Read the article

• Intellij + GWT 2: Development Mode ignores changes to static content

  - by Kaffeine Coma

  The new Development Mode in GWT 2 is awesome, but unfortunately as launched from Intellij IDEA 9, it does not seem to notice changes made to static files such as html, css, etc. It immediately see changes in *.java files, but not the static ones. If I make a change in a static file I need to quite the Development Mode tool and re-launch it. This is painfully slow, and negates much of the point of using dev mode in the first place I assume this is some artifact resulting from the way the Intellij runner launches it- it creates an out/artifacts/project_war_exploded directory with the static content and class files. How can I get Intellij Dev Mode tool to follow changes made to the original static source files?

  Read the article

• Boost C++ Singleton error LNK2001: unresolved external symbol "private: static long Nsp::HL::flag" (

  - by Soós Roland

  I try to create a multi-threaded singleton pattern class. Header: class HL{ public: static HL* getInstance(); ......... private: static HL* instance; static boost::once_flag flag; HL(); static void initOnce(); } CPP: HL* HL::instance = NULL; HL* HL::getInstance(){ if(instance == NULL){ boost::call_once(flag, initOnce); } return instance; } void HL::initOnce(){ instance = new HL(); } I get this error: error LNK2001: unresolved external symbol "private: static long Nsp::HL::flag" (?flag@HL@Nsp@@0JA) What's wrong?

  Read the article

• Webfaction: How do I run a Static/Perl app and Django app under the same website

  - by swisstony

  I have an existing Perl app that I'm moving to a Webfaction website. I will be adding Django apps to this Webfaction website too. I would like the Django app to get first call and so would want its URL path to be / This would allow me to add any new URLs to the urls.py I wish as my app grows. If the URL doesn't match anything in the urls.py I would like it to get passed to the static Perl app. For example /app1 - Django /app2 - Django Everything else not picked up by urls.py I would want going to my Perl app For example: /index.html - Static/Perl app /about.html - Static/Perl app /contact.html - Static/Perl app /apps/perlapp1.cgi - Static/Perl app etc How do I go about achieving this in Webfaction?

  Read the article

• Zend Framework cleaning default routes when adding other

  - by Renato Aquino

  I have the following problem with Zend Framework. My project has several controllers like Video,Category and Post. The VideoController has an Action called categorylist, so the default URL/Route becomes /video/categorylist Since the action requires 3 parameters I whant to add one simple route: $router->addRoute( 'categorylist', new Zend_Controller_Router_Route('categorylist/:category/:page/:per_page', array('controller' => 'video', 'action' => 'categorylist','page'=>1,'per_page'=>6,'category'=>1)) ); With this I got my URL like www.siteurl.com/categorylist/42/1/6 but, the View Helper URL got crazy, and every url for the other controllers I try to echo it´s redirected to the categorylist route. So when I try this: <?= $this->url(array("controller"=> "video", "action" =>"view",'category'=>1),null,true)?> The expected result its /video/view/category/1, but I got /categorylit only. I tryied to debug the default routes but I got an empty array. print_r($ctrl->getRouter()->getRoutes()); Does anyone have some clue about this wierd behavior? I´m using Zend Framework Version 1.9.7

  Read the article

• How to Initialise a static Map in Java

  - by fahdshariff

  How would you initialise a static Map in Java? Method one: Static initialiser Method two: instance initialiser (anonymous subclass) or some other method? What are the pros and cons of each? Here is an example illustrating two methods: import java.util.HashMap; import java.util.Map; public class Test { private static final Map<Integer, String> myMap = new HashMap<Integer, String>(); static { myMap.put(1, "one"); myMap.put(2, "two"); } private static final Map<Integer, String> myMap2 = new HashMap<Integer, String>(){ { put(1, "one"); put(2, "two"); } }; }

  Read the article

• strange behaviour of static method

  - by Cristian Boariu

  Hi, I load a js variable like this: var message = '<%= CAnunturi.CPLATA_RAMBURS_INFO %>'; where the static string CPLATA_RAMBURS_INFO i put like: public static string CPLATA_RAMBURS_INFO = "test"; I use it very well in this method. <script type="text/javascript"> var categoryParam = '<%= CQueryStringParameters.CATEGORY %>'; var subcategoryParam = '<%= CQueryStringParameters.SUBCATEGORY1_ID %>'; var message = '<%= CAnunturi.CPLATA_RAMBURS_INFO %>'; function timedInfo(header) { $.jGrowl(message, { header: header }); }; </script> so the message appears. I do not undersand, why, iso of "test", if i take the value from a static method, ths use of message js var is no longer succesfull (the message no longer appears). public static string CPLATA_RAMBURS_INFO = getRambursInfo(); public static string getRambursInfo() { return System.IO.File.ReadAllText(PathsUtil.getRambursPlataFilePath()); } Any help would be highly appreciated....

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >