Search Results

Search found 8923 results on 357 pages for 'wireless keyboard'.

Page 41/357 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• Could anyone help me get my NETGEAR WNA3100 (Broadcom BCM43231) wireless adapter to work?

  - by Matthew Carroll

  I have just moved back to Ubuntu from Windows 7 and a few months ago, I bought a NETGEAR WNA3100 wireless adapter because my old adapter had broken. I plugged in my adapter and it doesn't seem to work, I also used the windows 7 drivers for it and tried them on the program "Windows Wireless Drivers" and they don't seem to recognize the device. However I have heard you need XP drivers but I can't seem to find them on the internet nor find them on the CD. Could anyone help me get my wireless adapter to work? Any help is greatly appreciate. P.S I do have internet connection though I have to tether my phone to my computer and then connect my phone to my router.

  Read the article

• Is the wireless driver from Live USB different from the standard install?

  - by Rafael Magalhães

  Linux newbie here. I've been trying to use Ubuntu (x64) as my main OS since 11.10, but my wireless connection on it has been very unstable, droping every other 5-10 mins. For this reason I see myself forced to use Windows 7 (dual booting), where connection works flawlessly -- which really bothers me. My card is an Atheros 9k, which claims a reasonable amount of wireless complaints on Ubuntu forums. I've tried every suggestion given on past questions to this site but to no avail. However, while running Ubuntu Live USB for some of the tests, I noticed that my wireless connection never failed on it and wondered if its network configuration differs from the one on the default Ubuntu install. If this is the case, how could I reproduce the Live USB network environment on my hard drive install?

  Read the article

• My wireless/WiFi connection does not work. What can I do?

  - by Wild Man

  Your situation You have successfully installed Ubuntu. You have just downloaded and booted Ubuntu live media. The latest LTS (see also HWE) or latest non-LTS release are preferred. See the list of Ubuntu releases that are currently supported.) You upgraded your Ubuntu installation to the latest release that the software updater offered you. WiFi worked before, but not now on the new release. You migrated your existing Ubuntu installation to new hardware. Your problem The wireless of your laptop or dekstop is not working. You tried switching the wireless switch off and on and you tried rebooting several times, but you don't see any WiFi access points. You can see your wireless access point, but you cannot establish a connection. You want to analyze the problem, but you don't know where to start or what information you can provide. Related questions I have a hardware detection problem, what logs do I need to look into?

  Read the article

• What software is responsible for connecting to the wireless net specified in /etc/network/interfaces?

  - by zuba

  I'm curious what software (package, utility in bin's) handle interface parameters in /etc/network/interfaces and decides to connect to the specified wireless net. I use wifi usb stick dlink DWL-110 attached to wlan0 with ndiswrapper driver. Sometimes wlan0 sees my wifi net - iwlist wlan0 scan shows it, but does not connect to it - iwconfig shows AP Not-Associated, until I replug the stick. Neither reinserting module with ndiswrapper, not ifdown/ifup or restarting networking helps. That is why I need to know what OS entity handles connection/reconnection to wireless net. EDIT: shame on me, I use wireless-tool package with wep encryption

  Read the article

• How do I change the keyboard layout to a non-standard one on a Live (USB) session?

  - by Agmenor

  I am running Ubuntu 13.04 in a Live (USB) session. My physical keyboard layout is called Bépo, it is the French language Dvorak method-based layout. I would like to change my input layout to this too. To do this, I tried booting in a French spoken session, then open the Keyboard Layout preferences app. Normally, to add a layout, you should click on the + sign and select your layout. However the list that appears is very short and does not contain what I want. On the contrary, on a persistent non-live installation, the choice of Bépo is present. This is also the case during an installation of Ubuntu. So I do I change the keyboard layout of my live session to the correct one?

  Read the article

• How can I get media keys working on my keyboard?

  - by Victor9098

  Just got a new keyboard, the Microsoft comfort curve 2000, and everything seems to work fine accept for the 'back' and 'forward' multimedia keys. I am running Ubuntu 11.10 and have tried going into system settings - keyboard - shortcuts, then I try and hold down the keys to set the action I want them to perform, but nothing changes. Any thoughts on where else to look? Thanks -- UPDATE -- I rebooted and the options to change the keyboard shortcuts seem to be working now. Now I can tweak the whole thing and I managed to assign the media keys correctly. Thanks to everybody for the suggetions

  Read the article

• A Single wireless network is not showing up in Ubuntu that used too, and other devices have no issue finding or connecting to it

  - by Kit Sunde

  Up until about a week ago I could connect to my wireless, but now I suddenly can't. Every other wireless in the area show up in the network manager. My kindle can connect to it, my friend can connect to it (in windows) without having connected to it before. My other netbook (Samsung NC10) can connect to it, but my other Samsung N150 now cannot even see it. I have tried deleting the old auto entry for it in the network manager Tried disabling and enabling both the networking and the wireless through the network indicator. Disabled the networking through the hardware shortkut key thing [fn] + [F9] Attempting to connect to it as if it was a hidden network. I'm at a loss, how would I go about debugging and unborking my computer?

  Read the article

• Script to connect to hidden wireless network with static IP?

  - by nLinked

  Would like a script, when run, it should connect to a hidden wireless network with these details: SSID is "Wireless" Network is not broadcasting its SSID above (is hidden) WPA2-PSK, AES, password is "password" Static IP: 192.168.1.1 Def. gateway: 192.168.1.254 DNS: 192.168.1.254 No idea how to do this. But I do know the wireless interface is called wlan0 and I'm on Ubuntu 10.10. I don't want to use the built in Network Manager as it never auto-connects on startup. WICD doesn't work either. Any ideas most welcome.

  Read the article

• Programmatically get the WLAN config of a machine and use netsh to setup new profile

  - by Maestro1024

  How can I programmatically get the wireless LAN configuration of a machine and use netsh to setup new profile? I am having trouble getting the netsh command to set the ssid of a new card. I installed the drivers and plugged it in. I see in ipconfig it says the "media is disconnected" (fair enough). I then send the following command netsh wlan connect name=profile1 ssid=myNetwork interface="Wireless Network Connection 2" problem is I get an error "There is no profile "profile1" assigned to the specified interface. What is a profile for a wireless card? What should I set it to? How can I get my SSID set and connected for the card?

  Read the article

• DHCP over WiFi on CentOS 6 [closed]

  - by dongle26

  Using CentOS 6 I cannot get my WiFi interface to configure over DHCP. Here is my ifcfg-wlan0: This does not work (although it is correct): DEVICE=wlan0 BOOTPROTO=dhcp ONBOOT=yes HWADDR=xx:xx:xx:xx:xx:xx TYPE=Wireless This works: DEVICE=wlan0 BOOTPROTO=none ONBOOT=yes IPADDR=192.168.0.253 NETMASK=255.255.255.0 DNS1=192.168.0.99 GATEWAY=192.168.0.99 HWADDR=xx:xx:xx:xx:xx:xx TYPE=Wireless I don't want a static IP address, I want a DHCP assigned address. Update: Both of the above configs are correct. Please don't downvote, this really didn't work for me. It must be a bug in CentOS or my wireless driver. See my answer for details.

  Read the article

• IPs on home network

  - by windchime

  I have a Linksys router and a Belkin wireless router at home. The Linksys router is connected to cable modem and two computers, as well as to the Belkin wireless router. A 3rd computer is connected to the Belkin router through Wifi. The IP addresses of the computers connected to Linksys are 192.168.1.101 and 192.168.1.102. The IP address of the Linksys router on LAN is 192.168.1.1. The IP address of the Belkin wireless router is 192.168.2.1(based on the 3rd computer's routing table) and the IP address of the 3rd computer is 192.168.2.5. If I ping 192.168.1.101 from 192.168.2.5, all are well. However, if I ping 192.168.2.5 from 192.168.1.101, Destination Host Unreachable. Why?

  Read the article

• List of tablets with keyboards.

  - by JamesM

  Please if you know any good tablets with keyboards that come either built-in or attachable (not via a USB port) please post a link to the tablet, Please add a review for that tablet if you have one, if you don't have one please say what you would do with it if you had one. It must have a physical keyboard, Cannot be a wired or wireless keyboard, only built-in/attachable see below tablets for more of an idea. Tablets With Keyboards: http://gdgt.com/asus/eee/pad/slider/ http://gdgt.com/asus/eee/pad/transformer/ If you have a table, Please what do you think of it: (Review) Your-Name: Your review. If you don't have a tablet (with a non USB keyboard) please say what you would do with one: JamesM: If I have a slider or a transformer, it would be running kFreeBSD-Debian-Squeeze. Please feel free to improve the layout/format of this topic.

  Read the article

• Mapping capslock to control on Mac OS X: works for some things, but not others?

  - by keflavich

  I've mapped my capslock key to control using the Modifier Keys mapping in System Preferences: Keyboard. I've also tried mapping to "right control" instead of "left control" as per http://hints.macworld.com/article.php?story=20060825072451882 using a plist editor. The mapping seems to work in all cases except one: I can't use capslock with left-shift to make key mappings or apparently do anything else. capslock (as control) with right-shift works. I'm primarily testing by using control-tab / control-shift-tab to switch between tabs. Using the on-screen-keyboard viewer, I can get capslock-shift-(just about anything) to work, but not capslock-leftshift-tab. My best guess is that somehow the particular keyboard I'm working on is faulty, but I'm curious whether anyone else can reproduce this or has any ideas.

  Read the article

• Can I create an Infrastructure access point from built-in WiFi (as opposed to Ad-Hoc) on Windows XP?

  - by evilspoons

  I want to use my Windows XP laptop as an access point. What I am trying to achieve is possible under Windows 7 with a myriad of utilities, but the wireless driver stack was different before Windows 7 and those specific APIs don't exist on XP. The reason behind me wanting to do this is that I would like my Android phone to be able to connect via WiFi to a network that is only hard-wired (reverse tethering). Unfortunately, my Android device (Galaxy S Captivate) does not support ad-hoc networks without a serious amount of screwing around. Is it possible to create an "Infrastructure" network with my Dell Latitude D830's built-in WiFi - a "Dell Wireless 1395 WLAN Card", which I am assuming is probably rebadged Broadcom, or is there some fundamental difference between a wireless adapter and an access point that would prevent this?

  Read the article

• Can't enable wireless lan on Fujitsu Siemens A1665G with Ubuntu 11.10 installed

  - by Theo

  I saw my old Notebook yesterday and wanted to make that work again. On Windows XP the wireless worked still fine. Then I installed new Ubuntu 11.10 32bit and I'm sadly not able to make the wireless enabled. [I replaced Win XP entirely] lspci lists following network: 08:0a.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) So after recommendation from this link I installed the b43 firmware module. iwconfig prints the following: wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associatd Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management: off As you can see, my wireless lan adapter is not turned on. sudo iwconfig wlan0 txpower auto Doesn't change anything. Then I tried to make it work with rfkill. rfkill list 0: phy0: Wirless LAN Soft blocked: no Hard blocked: yes sudo rfkill unblock all rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes remains the same. The question is now, how I could enable the hard blocked wireless LAN. There is no hardware switch for wlan integrated. However there is a button to change the state. I always thought this would be software sided, but it seems to make some hardware changes as well... The wireless LED is also not blinking (as it did on windows xp) I reset bios and searched for some settings in there, but it has only a few options and nothing to do with wireless settings, nothing works here.. At last I tried to install the acer hotkeys but I was not able to manage that. I installed the acerhkgui package, but in initializing progress, it was not able to compile acer hotkeys for my machine. There was a message that asm/linkage.h was not found while compiling. Do you have any ideas what I could do to make this hard blocked stuff disabled and my wireless card work? PS: I also tried sudo rm /dev/rfkill and a reboot to reinit that stuff... No success :(

  Read the article

• wireless blocked after installing ubuntu 12.04

  - by Cornelia Frank

  I am using a lenovo S10-3 ideapad; had no problems with earlier version of ubuntu, only since installing 12.04. Have looked through many of the questions on the same issue and tried potential solutions but cannot seem to solve my problem. The hardware switch is in 'on' position and the wireless light comes on very briefly (2-3 sec) when the laptop starts up but then goes off and stays off. Pressing FN+F5 does nothing at all. I'd be grateful for any assistance. Cornelia Have received the following responses in Terminal: cf@cf-Lenovo:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes cf@cf-Lenovo:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. cf@cf-Lenovo:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: 00:26:9e:ee:7f:4c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=10.0.1.8 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0520000-f0520fff memory:f0510000-f051ffff memory:f0540000-f055ffff *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 01 serial: c4:17:fe:f8:bc:d7 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f010ffff WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• Ubuntu 12.04 no network connection

  - by user115711

  I own a HP probook 4530s. I installed ubuntu 12.04 along side my windows 7 professional OS. While in window 7 everything works properly in terms of wire and wireless connection. On Ubuntu 12.04 my wired connection doesn't work at all and wireless connection works only when I check off enable wireless then recheck enable wireless. When I recheck enable wireless, the wireless connection only works for about 30 seconds then it goes offline again.

  Read the article

• Prolink 5200 modem/router connected to Linksys WRT54GS wireless router

  - by lksanta

  Hello does any one knows how to conect prolink 5200 single port modem/router with Linksys wireless router ......i dont know how to configerat these to togather

  Read the article

• networking with ssh thru wireless

  - by nkvnkv

  I am using Ubuntu 12.04 64bit on my desktop and my laptop. Have install openssh client and server on both of them. My desktop is connected to ADSL2+ Router TD-8840 with wired connection and has 192.168.1.1 IP address. My laptop is connected to 150Mbps Wireless N Router TL-WR741ND with wireless connection and has 192.168.0.1 IP address. ADSL2+ Router TD-8840 and 150Mbps Wireless N Router TL-WR741ND are connected with a wired cable by useing blue port for on wlan on TL-WR741ND. ifconfig from desktop desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1d:92:37:1f:3d inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21d:92ff:fe37:1f3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57508 errors:0 dropped:0 overruns:0 frame:0 TX packets:44508 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:51547633 (51.5 MB) TX bytes:6371374 (6.3 MB) Interrupt:43 Base address:0x6000 eth1 Link encap:Ethernet HWaddr 00:23:cd:b1:ff:e4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:22 Base address:0x8400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:109 errors:0 dropped:0 overruns:0 frame:0 TX packets:109 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12044 (12.0 KB) TX bytes:12044 (12.0 KB) ifconfig from laptop laptop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:a0:d1:65:2a:42 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:31244 (31.2 KB) TX bytes:31244 (31.2 KB) wlan0 Link encap:Ethernet HWaddr 00:19:d2:1b:19:81 inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::219:d2ff:fe1b:1981/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1590 errors:0 dropped:0 overruns:0 frame:0 TX packets:1276 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:874763 (874.7 KB) TX bytes:315401 (315.4 KB) I can connect to desktop from laptop via ssh with no problem, internet connection on laptop and desktop is working fine, but when I want to connect to laptop from desktop via ssh in terminal I type ssh [email protected] and get ssh: connect to host 192.168.0.101 port 22: Connection timed out If anyone is able to point out whats wrong?

  Read the article

• Problems with wireless file copy - hangs during copy

  - by Eran Kampf

  I have this problem on my home network where when I try to copy files via wireless connection, at some point the copy fails and the machine doing the copy loses connection to the network. I'm pretty much lost as to figuring out the source for the problem... Some more details that might help: It's not OS related. I have Windows 7 machines and Leopard machines and this occurs on both I'm using a 3com OfficeConnect router Wired transfer works fine Other programs that require heavy wireless traffic work just fine:streaming large HD movies, Xbox Live! ... I'm lost as to how to even begin trying to diagnose the problem so any tips are welcome...

  Read the article

• How to swap the "fn" use of Function keys on al Apple Keyboard in Linux

  - by jfmessier

  I have an apple slim keyboard (USB) and if I want to use one of the Function Key as-is, I also have to press "fn " key first. Otherwise, it will try to perform the other function of the key, such as increasing or decreasing the display intensity, change the volume/mute, etc.... As well, the fn key is actually in the position of the "insert" key for regular keyboards. How can I fix all of that ? I really like this keyboard, as it make my typing much easier, and much more silent too. But some of those mappings that are different sometime bug me. Thanks :-)

  Read the article

• Multiple Wireless Networks via Airport?

  - by Moshe

  Is it possible to to connect to multiple networks at the same time using the AirPort wireless card on my iMac 21.5"?

  Read the article

• Wireless network not working Linux Mint

  - by zharvey

  I have a home LAN that I am confident is working properly (I have a Windows 7 and an Ubuntu Desktop machine that both see the router and a working Internet connection). I just installed Linux Mint (Maya) on a new machine and although I can connect to the Internet via a wired (ethernet) connection, it does not see my wireless network. In fact, as you can see in the screenshot below, it doesn't even look like it has the drivers to be able to detect a wireless network... I have ran update manager and made sure that I am up-to-date with everything and have restarted. Any ideas here?!?

  Read the article

• Windows 7 64bit keyboard issues

  - by Scott

  I have a Pavilion dv4 notebook running Windows 7 64bit Enterprise edition. This morning I started to notice some really strange behavior in how it handled its built-in keyboard. At random intervals there will be a long delay in key presses, to which some keys will never show and other keys will continue to repeat until you hit the backspace. Other keys get mapped incorrectly to other keys. If I hook up an external keyboard the problem does not appear. Before I reformat the machine and do a fresh install, I thought I would check here to see if anyone has experienced this same issue and if so, how did you fix it?

  Read the article

• Keyboard automatically disconnects and reconnects

  - by Algorithms

  The problem i am facing is the keyboard (USB) automatically disconnects when there is a fluctuation in the power supply to the speaker. The speaker and the pc both draw power from a apc ups. The fluctuation occurs because the speaker plug is not tightly connected to the ups power outlet. It is okay for normal work, but a accidental jerk causes the fluctuation. However after some amount of time (usually within 5 seconds) the keyboard automatically reconnects and windows plays the sound of hardware connected. This problem will also occur if I manually take out the speaker power cable from the ups power outlet. My question is whether the problem I am facing is due to electrical issues, or due to software problems. PC config: OS : Windows 7 Ultimate UPS : APC 600 VA PSU : Corsair TX 650 Speaker : Realtek

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >