Search Results

Search found 15247 results on 610 pages for 'state machines'.

Page 410/610 | < Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >

• Firebird 2.5 Database Corrupt

  - by BrendanH

  We have an issue where a database hangs the server when: a backup is performed (Hangs on a specific table) selecting * or count(1) from a specific table or viewing data that is related to the table (FKs, etc) We could browse the table to a certain point (using IBExpert) however after about 2900 records the machine just spikes and hangs. Performing a gfix -m does not work, and the validation reports back Record level errors = 4 (no matter how many times we run gfix -m, -v, etc. The Firebird.log file reports back these types of messages: Relation has 91631 orphan backversions (9214273 in use) in table BINS (137) - {Which is apparently just a warning} Unable to complete network request to host "MHPLZA1". Error reading data from the connection. INET/inet_error: read errno = 10054 SERVER/process_packet: broken port, server exiting Shutting down the server with 1 active connection(s) to 1 database(s), 0 active service(s) - {If we leave the backup to run while hanging, it eventually logs this error message} The setup is: The table is question has about 7000 records. The Firebird version is 2.5 Classic Server x64 install. The OS is Windows Server 2008. This is a virtual machine (VMWare) running on a massive server. (Does anyone have issues with VMs and Firebird?). We have the same setup running fine on other servers (However they are not virtual machines). Is there anyway to pin point the issue and or the cause?

  Read the article

• Linux Distro for Beginners

  - by XLR3204S

  Well... I know that's the question arising all over the Internet, but I couldn't find an answer to suit me after googling for quite some time. I'd like to get a Linux distribution, and start learning using the CLI. I'm looking for a distribution already having GNOME installed, as I'll be using Linux-Command.org as my learning resource, and I'm not very familiar with CLI-based web browsers. I'd mainly like to get to know my way around a UNIX-based system, and then I think I'd like to pick up a CLI-only distribution, and start doing more complex stuff. I've tried Ubuntu, Fedora Core, OpenSolaris and FreeBSD (the last two aren't linux distros, I know). Ubuntu and FC are fine, they do come with Firefox, but I'm not really sure they're meant for learning purposes. OpenSolaris was OK as well, but I haven't got to play with it enough. FreeBSD 7.2 did not want to install itself on my 13" MacBook Pro, it generated a kernel panic everytime while copying the files to the disk. So to sum this up, I'm trying to learn Linux, and I'm willing to invest time into this (that is, not giving up when the first problems arise). I also have intermediate knowledge of C++, if it helps, and I'm also using the CLI-vim to write small C++ CLI-based programs, so text editing should be any problem. And... speaking of Macs, how am I going to be limited if I try to learn how to use UNIX-based systems using the OS X Terminal? It uses bash 3.2, isn't this the same shell as the one found on most of the Linux machines? How does the fact that OS X is based on FreeBSD 4.4, if I'm not mistaking, affect this? Thanks in advance, and hopefully, I'll have a starting point ASAP.

  Read the article

• Can VMWare Server 2.0 be useful in Production for easing backups?

  - by Keith Sirmons

  Howdy, Let's run this idea by the group here. I am thinking about using VMWare Server in production to host a 2008 Domain Controller with DHCP and DNS, a 2008 member server with WSUS, some virus software, and other "management" utilities a second 2008 member server with SQL, IIS, and File Shares for a medium business of 50-100 desktops. The reason I am leaning toward Server vs ESXi is for backup purposes. Using ESXi, if I want to backup the VM's, I would need a second server in the office with enough storage availability to hold a copy of the vmdks. I am wondering if putting this virtual environment on top of a basic 2008 server install will allow for easier backups to both tape and/or to offsite storage using JungleDisk. Can a snapshot be triggered easily via a scheduled job? I know this doesn't necessarily handle file level restores, but I want to make sure in a DR situation, we can restore production servers quickly. Does this concept hold water? Would a very minimum install of the 2008 Host remove too many resources from the actual production machines? This would be a new Dell 410 server with 12 GB ram and (6) 600 GB 15K in a RAID 6, Dual Intel Xeon 2.26GHz procs.

  Read the article

• Hardware for a home server running Windows Server 2008 R2 Hyper-V or Microsoft Hyper-V Server 2008 R2

  - by David Hayes

  Hi, I'm planning to build a server to do the following Act as a file server (videos, pictures music) Run Squeezebox server Run Zune Software to allow wireless syncing to Windows Phone 7 I'd also like to aim for Low power usage (i'd settle for less than the 90-100Watts I'm using atm Flexibility, I might want to add a web server or sharepoint or... Something I can learn/test on, work is mainly a Windows shop but I do have Linux experience too I'd like to take a look at App-V (application virtualization) too I'd like it to cost less than $1000 Quiet would be nice but not essential (it'll be in the basement) I'm thinking of getting a technet subscription to get access to Windows Server 2008 R2 at a reasonable price ($199) So my plan was this Get a bunch of 2TB Caviar green drives to RAID up (RAID 1 or 6 probably) Get a Quad core CPU (Intel i5/i7 probably) Install a Hypervisor Install w2k8 R2 Storage Server for a NAS Install Windows 7 Pro to run Zune/Squeeze box Install any other machines I want to play with Questions Can anyone see any issues with this or have any better ideas? Do you think I'd need an i7 over an i5? Is 4 cores enough/too much? Can anyone sugest a nice, reasonably priced case that will hold 6-8 drives and stay cool Should I wait for Sandy Bridge parts?

  Read the article

• MaxStartups and MaxSessions configurations parameter for ssh connections?

  - by Webby

  I am copying the files from machineB and machineC into machineA as I am running my below shell script on machineA. If the files is not there in machineB then it should be there in machineC for sure so I will try copying the files from machineB first, if it is not there in machineB then I will try copying the same files from machineC. I am copying the files in parallel using GNU Parallel library and it is working fine. Currently I am copying 10 files in parallel. Below is my shell script which I have - #!/bin/bash export PRIMARY=/test01/primary export SECONDARY=/test02/secondary readonly FILERS_LOCATION=(machineB machineC) export FILERS_LOCATION_1=${FILERS_LOCATION[0]} export FILERS_LOCATION_2=${FILERS_LOCATION[1]} PRIMARY_PARTITION=(550 274 2 546 278) # this will have more file numbers SECONDARY_PARTITION=(1643 1103 1372 1096 1369 1568) # this will have more file numbers export dir3=/testing/snapshot/20140103 find "$PRIMARY" -mindepth 1 -delete find "$SECONDARY" -mindepth 1 -delete do_Copy() { el=$1 PRIMSEC=$2 scp david@$FILERS_LOCATION_1:$dir3/new_weekly_2014_"$el"_200003_5.data $PRIMSEC/. || scp david@$FILERS_LOCATION_2:$dir3/new_weekly_2014_"$el"_200003_5.data $PRIMSEC/. } export -f do_Copy parallel --retries 10 -j 10 do_Copy {} $PRIMARY ::: "${PRIMARY_PARTITION[@]}" & parallel --retries 10 -j 10 do_Copy {} $SECONDARY ::: "${SECONDARY_PARTITION[@]}" & wait echo "All files copied." Problem Statement:- With the above script at some point I am getting this exception - ssh_exchange_identification: Connection closed by remote host ssh_exchange_identification: Connection closed by remote host ssh_exchange_identification: Connection closed by remote host And I guess the error is typically caused by too many ssh/scp starting at the same time. That leads me to believe /etc/ssh/sshd_config:MaxStartups and MaxSessions is set too low. But my question is on which server it is pretty low? machineB and machineC or machineA? And on what machines I need to increase the number? On machineA this is what I can find - root@machineA:/home/david# grep MaxStartups /etc/ssh/sshd_config #MaxStartups 10:30:60 root@machineA:/home/david# grep MaxSessions /etc/ssh/sshd_config And on machineB and machineC this is what I can find - [root@machineB ~]$ grep MaxStartups /etc/ssh/sshd_config #MaxStartups 10 [root@machineB ~]$ grep MaxSessions /etc/ssh/sshd_config #MaxSessions 10

  Read the article

• Linux (NAS) Permissions problem (Permission Denied)

  - by calumbrodie

  This is probably easier to show than to explain... -bash-3.2$ id uid=501(admin) gid=503(admin) groups=100(users),501(admins),503(admin) -bash-3.2$ groups admin users admins -bash-3.2$ ls -l total 8 drwxrwxrwx 78 admin www 4096 Dec 9 09:02 Inbox drwxrwxrwx 21 admin www 4096 Dec 8 21:45 Movies drwxrwx--- 3 admin www 52 Dec 9 07:57 TV -bash-3.2$ cd Movies -bash-3.2$ ls -l total 20 drwxrwx--- 7 admin www 4096 Dec 8 00:04 Action drwxrwx--- 6 admin www 4096 Dec 8 00:05 Animation drwxrwx--- 4 admin www 4096 Dec 8 00:17 Comedy drwxrwx--- 4 admin www 4096 Dec 8 00:14 Drama drwxrwx--- 4 admin www 4096 Dec 8 00:14 Family drwxrwx--- 6 admin www 58 Dec 6 19:10 Foreign Language drwxrwx--- 2 admin www 31 Dec 7 23:58 Horror drwxrwx--- 3 admin www 50 Dec 8 00:15 Science Fiction drwxrwx--- 2 admin www 6 Dec 8 00:16 Thriller -bash-3.2$ cd ../Inbox -bash: cd: ../Inbox: Permission denied Filesystem is XFS. Are there permissions on the directories that ls -l wouldn't show? I'm the owner of all directories and files inside them. I can sudo to modify the file permissions or view the contents of the folders but I need them to be accessible by 'admin'. Any ideas? I'll be checking the question regularly so let me know if I need to update this with more information. Thanks Edit : Added strace execve("/bin/ls", ["ls", "Inbox"], [/* 21 vars */]) = 0 brk(0) = 0x26000 uname({sys="Linux", node="axentraserver.the-brodie-stora.mystora.com", ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001c000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=17972, ...}) = 0 mmap2(NULL, 17972, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001d000 close(3) = 0 open("/lib/librt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0P\25\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=39776, ...}) = 0 mmap2(NULL, 57816, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40025000 mprotect(0x4002b000, 28672, PROT_NONE) = 0 mmap2(0x40032000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40032000 close(3) = 0 open("/lib/libacl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\24\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=134375, ...}) = 0 mmap2(NULL, 54368, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40034000 mprotect(0x4003a000, 28672, PROT_NONE) = 0 mmap2(0x40041000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40041000 close(3) = 0 open("/lib/libselinux.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\2147\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=297439, ...}) = 0 mmap2(NULL, 117504, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40042000 mprotect(0x40056000, 28672, PROT_NONE) = 0 mmap2(0x4005d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13) = 0x4005d000 close(3) = 0 open("/lib/libgcc_s.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\10\"\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=43164, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40022000 mmap2(NULL, 74572, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4005f000 mprotect(0x4006a000, 28672, PROT_NONE) = 0 mmap2(0x40071000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa) = 0x40071000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0XI\1\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1517948, ...}) = 0 mmap2(NULL, 1245628, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40072000 mprotect(0x40195000, 32768, PROT_NONE) = 0 mmap2(0x4019d000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x123) = 0x4019d000 mmap2(0x401a0000, 8636, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x401a0000 close(3) = 0 open("/lib/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\230A\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=121044, ...}) = 0 mmap2(NULL, 115184, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401a3000 mprotect(0x401b5000, 28672, PROT_NONE) = 0 mmap2(0x401bc000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11) = 0x401bc000 mmap2(0x401be000, 4592, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x401be000 close(3) = 0 open("/lib/libattr.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\364\f\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=40571, ...}) = 0 mmap2(NULL, 45512, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401c0000 mprotect(0x401c3000, 32768, PROT_NONE) = 0 mmap2(0x401cb000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3) = 0x401cb000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\254\10\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=15344, ...}) = 0 mmap2(NULL, 41116, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401cc000 mprotect(0x401ce000, 28672, PROT_NONE) = 0 mmap2(0x401d5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x401d5000 close(3) = 0 open("/lib/libsepol.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\330/\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=228044, ...}) = 0 mmap2(NULL, 301748, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401d7000 mprotect(0x4020f000, 28672, PROT_NONE) = 0 mmap2(0x40216000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x37) = 0x40216000 mmap2(0x40217000, 39604, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40217000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40221000 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40222000 set_tls(0x40221d00, 0x40221d00, 0x40024000, 0x402223e8, 0x41) = 0 mprotect(0x401d5000, 4096, PROT_READ) = 0 mprotect(0x401bc000, 4096, PROT_READ) = 0 mprotect(0x4019d000, 8192, PROT_READ) = 0 mprotect(0x4005d000, 4096, PROT_READ) = 0 mprotect(0x40032000, 4096, PROT_READ) = 0 mprotect(0x40023000, 4096, PROT_READ) = 0 munmap(0x4001d000, 17972) = 0 set_tid_address(0x402218a8) = 9539 set_robust_list(0x402218b0, 0xc) = 0 rt_sigaction(SIGRTMIN, {0x401a6d90, [], SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x401a6c64, [], SA_RESTART|SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 brk(0) = 0x26000 brk(0x47000) = 0x47000 open("/proc/mounts", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "rootfs / rootfs rw 0 0\nubi0:root"..., 1024) = 1024 read(3, "fs.xino,noplink,create=mfs,sum,b"..., 1024) = 428 read(3, "", 1024) = 0 close(3) = 0 munmap(0x4001d000, 4096) = 0 access("/etc/selinux/", F_OK) = 0 open("/etc/selinux/config", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory) ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(1, TIOCGWINSZ, {ws_row=52, ws_col=153, ws_xpixel=918, ws_ypixel=728}) = 0 stat64("Inbox", {st_mode=S_IFDIR|0777, st_size=4096, ...}) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1696, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1696 read(3, "", 4096) = 0 close(3) = 0 munmap(0x4001d000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=17972, ...}) = 0 mmap2(NULL, 17972, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001d000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\304\27\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=49256, ...}) = 0 mmap2(NULL, 70316, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40223000 mprotect(0x4022c000, 28672, PROT_NONE) = 0 mmap2(0x40233000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0x40233000 close(3) = 0 mprotect(0x40233000, 4096, PROT_READ) = 0 munmap(0x4001d000, 17972) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=1661, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 1661 close(3) = 0 munmap(0x4001d000, 4096) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/group", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=700, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "root:x:0:root\nbin:x:1:root,bin,d"..., 4096) = 700 close(3) = 0 munmap(0x4001d000, 4096) = 0 open("Inbox", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = -1 EACCES (Permission denied) write(2, "ls: ", 4ls: ) = 4 write(2, "Inbox", 5Inbox) = 5 write(2, ": Permission denied", 19: Permission denied) = 19 write(2, "\n", 1 ) = 1 close(1) = 0 exit_group(2) = ? 2nd edit: Elaboration for Mike. The Inbox sits at the following location /home/admin/MyLibrary/MyVideos/Inbox /home/admin/MyLibrary/MyVideos/Movies The system is a Netgear Stora NAS box that I have root access to. The /home/ folder is mounted as an smb share on various computers around the house. The folder /Inbox cannot be opened on any of those machines (they all connect as 'admin'). When I ssh into the box using the 'admin' credentials I am also unable to access the folder. The folder was created via a Web Admin page hosted on the NAS. The user/group for the Inbox folder was previously apache:www (expected as this folder was created by the web application), but I chmod/chowned the folder as the root user in an attempt to grant the admin user (therefore the rest of the connected machines) access to the files. Sorry for not including this earlier, I wasn't sure if it was relevant and didn't want to confuse the situation. -Thanks 3rd Edit Sorry again - It looks like this NAS is running some custom version of Red Hat, not Debian as previously stated - I'm not sure if this makes a difference

  Read the article

• HAProxy + NodeJS gets stuck on TCP Retransmission

  - by sled

  I have a HAProxy + NodeJS + Rails Setup, I use the NodeJS Server for file upload purposes. The problem I'm facing is that if I'm uploading through haproxy to nodejs and a "TCP (Fast) Retransmission" occurs because of a lost packet the TX rate on the client drops to zero for about 5-10 secs and gets flooded with TCP Retransmissions. This does not occur if I upload to NodeJS directly (TCP Retransmission happens too but it doesn't get stuck with dozens of retransmission attempts). My test setup is a simple HTML4 FORM (method POST) with a single file input field. The NodeJS Server only reads the incoming data and does nothing else. I've tested this on multiple machines, networks, browsers, always the same issue. Here's a TCP Traffic Dump from the client while uploading a file: ..... TCP 1506 [TCP segment of a reassembled PDU] >> everything is uploading fine until: TCP 1506 [TCP Fast Retransmission] [TCP segment of a reassembled PDU] TCP 66 [TCP Dup ACK 7392#1] 63265 > http [ACK] Seq=4844161 Ack=1 Win=524280 Len=0 TSval=657047088 TSecr=79373730 TCP 1506 [TCP Retransmission] [TCP segment of a reassembled PDU] >> the last message is repeated about 50 times for >>5-10 secs<< (TX drops to 0 on client, RX drops to 0 on server) TCP 1506 [TCP segment of a reassembled PDU] >> upload continues until the next TCP Fast Retransmission and the same thing happens again The haproxy.conf (haproxy v1.4.18 stable) is the following: global log 127.0.0.1 local1 debug maxconn 4096 # Total Max Connections. This is dependent on ulimit nbproc 2 defaults log global mode http option httplog option tcplog frontend http-in bind *:80 timeout client 6000 acl is_websocket path_beg /node/ use_backend node_backend if is_websocket default_backend app_backend # Rails Server (via nginx+passenger) backend app_backend option httpclose option forwardfor timeout server 30000 timeout connect 4000 server app1 127.0.0.1:3000 # node.js backend node_backend reqrep ^([^\ ]*)\ /node/(.*) \1\ /\2 option httpclose option forwardfor timeout queue 5000 timeout server 6000 timeout connect 5000 server node1 127.0.0.1:3200 weight 1 maxconn 4096 Thanks for reading! :) Simon

  Read the article

• Prohibit installers from modifying Windows Firewall rules

  - by Sysadmin

  Some application installers tamper with the Windows Firewall rules. I would like to prohibit such automated modifications of the Windows Firewall rules on Windows 7 machines (which use the Windows 7 version of Windows Firewall). Is there some setting that would accomplish this, or would it be necessary to resort to hooking the Windows Firewall API? I would like to prevent these modifications from being made at all, rather than backing up the firewall rules before the installation and restoring them afterward. A TechNet article indicates that there is no way to prevent installers from accessing the Windows Firewall API, but that article pertains to the Windows XP version of Windows Firewall. The Windows 7 version of Windows Firewall is newer and much-improved over the Windows XP incarnation, so it is unclear whether that advice is still pertinent. A similar SuperUser question had received a couple of responses, but neither response answered the question, likely because they misunderstood that question due to the way it was worded. I hope that I have explained this problem clearly. Don't hesitate to ask if you need any clarification.

  Read the article

• RPCSS kerberos issues on imaged Windows workstations

  - by sysadmin1138

  While doing some unrelated troubleshooting I came across a set of Event Log entries that have me concerned. Machine Name: labcomputer82 Source: Security-Kerberos Event ID: 4 Event Description: The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server labcomputer143$. The target name used was RPCSS/imagemaster4.ad.domain.edu. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (AD.DOMAIN.EDU) is different from the client domain (AD.DOMAIN.EDU), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server. There are three machine names used in this message. It's generated on labcomputer82, it's attempting to talk to another lab workstation called labcomputer143, and the service in question (RPCSS) refers to the name of the machine that this machine was imaged from (and possibly also that of labcomputer143, I'm not sure). The thing that has me raising both eyebrows is that the machine named labcomputer82 is attempting to use an SPN of RPCSS/imagemaster4.ad.domain.edu. The SPN attribute on the computer object in AD looks just fine. It has all the names it should have. Of the over 3,000 computer objects in our AD domain, somewhere around 1,700 of the are computer-lab seats that are frequently imaged. If we're doing something wrong, I'd like to know in time to get our procedures modified (and people retrained) for fall quarter. But if this is normal for imaged machines, I'll just continue ignoring these.

  Read the article

• Vista ICS issue

  - by Bill Grey

  I have a strange problem with Internet Connection Sharing on a laptop running Vista Business. This laptop is connected to the internet via the ethernet port, which goes to an ADSL modem. it is automatically assigned the IP address 192.168.1.50, and the modem/gateway is 192.168.1.1 My friends laptop is running Vista Home. Previously, I would create an ad hoc wireless network, enable ICS, and everything would be perfect. My friend would have internet access via this. However, something has now mysteriously broken. If I enable ICS on the wireless connection, it resets my Local Area Connection, assigning it the manual IP address of 192.168.0.1, which means my connection to the internet is destroyed. Both wireless adapters on each network are assigned auto configuration addresses, in the 168. range. They can see each other fine, but my friends laptop cannot access the internet via mine, even after I have restored the Local Area Connection settings. I understand the computer with ICS enabled must have the IP of 192.168.0.1, but previously, before whatever went wrong, my wireless adapter would be 192.168.0.1 and my friends computer would get an IP via DHCP. I have also tried setting static IP address and making a bridge, none of which works. How can I fix this problem, and prevent enabling ICS from touching my Local Area Connection? Both machines have no firewall, have appropriate settings etc...

  Read the article

• Cannot connect to local network shares when connected to VPN. Error: "the user name could not be found"

  - by Nick G

  I keep finding that on our small company LAN (7 users, 3 servers) that some servers keep becoming "not accessible" for the purposes of file sharing. They display the message "\SERVER is not accessible. You might not have permission to use this network resource. The user name could not be found". But I don't know why "the user name could not be found" as all the machines are on the same domain and the PDC and BDC seem to be behaving OK. EDIT: VPN seems to be the cause: It turns out I can see the server if I use the IP address (\\1.2.3.4\ etc) or the FQ active directory name (eg \server.domainname.local) but not if I use the server name on its own or a mapped network drive originally created from the "short" name. Oddly though, my machine has no issue resolving the server's DNS name as I can ping the machine name OK and it immediately comes back with the IP, however nslookup seems to fail. It seems to be a problem with how Windows looks up machine names when connected to VPNs. When I'm connected to a VPN, windows seems to use the DNS assocated with the VPN and not the one on the domain controller. This behavior to me, seems incorrect as surely that would mean connecting to any VPN would break any ability to lookup local machine names for servers and printers etc. So I guess the real question now is, how can I make my machine still search the local Active Directory DNS (the PDC) even when connected to a VPN? More info in my comments below.

  Read the article

• Hyper-V virtual machine can't be migrated to a specific host in the cluster

  - by Massimo

  I have a three-node Hyper-V cluster running on Windows Server 2008 R2 which is working quite flawlessly: there are no errors, live migration works, all hosts can and will happily run all virtual machines, and so on. But one specific virtual machinee is trying to make me go mad: it works on two nodes of the cluster, but not on the third one. Whenever I try to move the VM to that node, be it in a live migration or with the VM powered off, it always fails. In the event log of the host these events are logged: Source: Hyper-V-VMMS Event ID: 16300 Cannot load a virtual machine configuration: General access denied error (0x80070005) (Virtual machine ID <GUID>) Source: Hyper-V-VMMS Evend ID: 20100 The Virtual Machine Management Service failed to register the configuration for the virtual machine '<GUID>' at 'C:\ClusterStorage\<PATH>\<VM>': General access denied error (0x80070005) Source: Hyper-V-High-Availability Event ID: 21102 'Virtual Machine Configuration <VM>' failed to register the virtual machine with the virtual machine management service. All other VMs can be moved to/from the offending host, and the offending VM can be moved between the other two hosts. Also, this is not a storage problem, because there are other VMs in the same cluster volume, and the host has no troubles running them. What's going on here?

  Read the article

• Help building maya render node spec

  - by Ak

  Hi there, I'm looking to build 4x Maya render slaves/nodes for a friend of mine when his project gets green lit. The project involves MentalRay and lots of glass. I'm unsure if the new i7's 9xx or 8xx with hyper threading will do any better than a core 2 quad of the same (or close enough) speed. Does hyper threading make a difference to Maya or is it more performance per core based? I'm sure he's prefer I'd build another render node than pay for a bleeding edge CPU that only adds fractionly more GHz. -- The rest of the spec so far: 4Gb - 8Gb ram 64 bit OS: Probably Windows 7 (I know Linux is free, but want to build something my friend can support himself as easily as he supports his own workstation) 1TB HDD to hold textures, Maya files and renders which will be copied to central storage later Mobo with on-board video, gigabit NIC 500 - 650 watt PSU Desktop case something like a: Cooler Master ATCS 840 The machines will sold afterwards if necessary. -- If anyone has had experience in Maya and has done any tests with the new CPUs vs. the older ones I'd really appreciate your input.

  Read the article

• Vmware Player 3.0 - cannot ping 32 bits guest from 64 bits (guest or host)

  - by npmj

  I'm stuck with what seems a bug in VmWare Player (build 203739). I'm using W7 Ultimate 64bits as host and have a CentOS 5.4 (64 bits) as a guest and a Windows XP Professional SP3 (32 bits) as another guest. From the 64 bits machines (the host and the linux guest) I cannot ping the windows XP. Off course, I already turned off the windows firewall in the guest and also in the host. The network is pretty basic, I'm using Vmnet8 (NAT), with DHCP and port forwarding (to the windows XP's IP). Everything is working ok, I have internet access from host and from both guests. Port forwarding to the XP guest is working ok too. The only problem is that I cannot access the XP guest through the Vmnet8. I monitored the traffic using wireshark (in the host and in the windows guest). If I try to ping the XP guest from the host, what I see is the ARP request leaving the host, being answered by the guest and, after that, there is no echo request leaving the host. The same occurs if I try to ping the XP from the CentOs guest. From the windows XP guest I can ping both the host and the CentOs guest. From the XP guest I can access the host shares. Obviously, from the host I cannot see the XP shares (as I cannot even ping the guest). I want to maintain this setup (using NAT to share the host's internet connection). Any suggestions?

  Read the article

• Remotely managing Scheduled Tasks on another computer: Access Denied

  - by Eptin

  I need to remotely create new scheduled tasks from a Windows 7 computer in my company (which according to this Microsoft TechNet article I should be able to do. http://technet.microsoft.com/en-us/library/cc766266.aspx ) From within Task Scheduler, on the menu I click Action Connect to another Computer. I browse for the remote computer's name (I use Check Names to verify that the name is correct) and then I check 'Connect as another user' and enter \Administrator and the local admin password. Whenever I try this, I get the error message Task Scheduler: You do not have permission to access this computer Firewall isn't the problem I am able to use Remote Desktop with this username & password combo, so I would expect it to work when remotely managing as well. The remote computer has firewall exceptions for Remote Scheduled Tasks Management, Remote Service Management, and Remote Desktop among other things. Heck, I even tried turning off the firewall for that individual computer and it still didn't work. More details: I have administrative remote access to several other Windows 7 Enterprise computers, though I log in as the local Administrator (whose administrative rights are only recognized by that local machine, not by the domain). The computer I am managing from is on the domain, and also has administrative rights that are recognized on the domain. More experimentation: If I go the other way around and remote-desktop into the other machine and from there open task scheduler then 'connect to another computer', I am able to connect back to my main computer using the username & password that is recognized by an administrator on the domain, and successfully schedule a task on my main computer. So it's not a company firewall issue that's preventing anything from working. The only permissions requirement Microsoft talks about is "The user credentials that you use to connect to the remote computer must be a member of the Administrators group on the remote computer". I'm logging in as an Administrator on each of the local machines, so why doesn't it work?

  Read the article

• ISA Server 2006 SSL Certificate Dilemma

  - by JohnyD

  I'm making so great headway in offering our services over https with help from a Go Daddy certificate, later to be upgraded to Thawte SSL123 certs. But, I've just run into one whopper of a problem. Here's my setup: I run an ISA 2006 firewall. Our web services are distributed over 2 servers. One is Windows 2000 (www.domain.com) and the other is Windows 2003 (services.domain.com). So, I'll need to purchase 2 certs for both www and services, import them into IIS6 on their respective machines, then export them with the primary key (making sure to Include all certificates in the certification path if possible... that had me stumped for a while), and then to finally import them into ISA's local computer Personal store. The problem I've just run into is that I have separate firewall rules for services.domain.com and www.domain.com... because requests need to be forwarded to different web servers. Each of these firewall rules use the same httplistener. I have just found out that you can only use 1 certificate per httplistener. To make matters worse you can only have a single httplistener per ip / port. Is this correct? I can only use a single certificate for a single ip address? This would seem to be a severe limitation. Am I wrong? If I'm not then I've got a whole lot more work ahead of me as I'll have to set up extra ip's, add them to the firewall's network interface, create new listeners using that ip, etc... Can someone please confirm that I'm doing this correctly / incorrectly? Once I got my head wrapped around it all it seemed easy... then this. Thanks in advance.

  Read the article

• Fedora 16 can connect to samba share using smbclient but not in nautilus 3.2.1

  - by Nathan Jones

  I have a machine running Ubuntu 11.10 Server acting as a Samba server to share my home directory. Everything works fine on my Windows 7 machine, but on my Fedora 16 laptop, if I use Nautilus to try to access the share using smb://192.168.0.8/nathan in the location bar, it just has the loading cursor and does nothing. It never shows any errors, nothing. Using smbclient works just fine, but I'd like to get it working in Nautilus. I know that there can be problems with SELinux and Samba, so I created a file called booleans.local that contains samba_enable_home_dirs=1. My smb.conf file looks like this: # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<[email protected]> for # sending the correct chat script for the passwd program in Debian Sarge). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. pam password change = yes # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections map to guest = bad user ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ; domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u # This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup --force-badname %g ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this # load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 # socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. # domain master = auto # Some defaults for winbind (make sure you're not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash # The following was the default behaviour in sarge, # but samba upstream reverted the default because it might induce # performance issues in large organizations. # See Debian bug #368251 for some of the consequences of *not* # having this setting and smb.conf(5) for details. ; winbind enum groups = yes ; winbind enum users = yes # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones usershare allow guests = yes #======================= Share Definitions ======================= # Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares. This will share each # user's home director as \\server\username [homes] comment = Home Directories browseable = yes # By default, the home directories are exported read-only. Change the # next parameter to 'no' if you want to be able to write to them. read only = no # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ; create mask = 0775 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ; directory mask = 0775 # By default, \\server\username shares can be connected to by anyone # with access to the samba server. Un-comment the following parameter # to make sure that only "username" can connect to \\server\username # The following parameter makes sure that only "username" can connect # # This might need tweaking when using external authentication schemes valid users = %S # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700 [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = no create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no # Uncomment to allow remote administration of Windows print drivers. # You may need to replace 'lpadmin' with the name of the group your # admin users are members of. # Please note that you also need to set appropriate Unix permissions # to the drivers directory for these users to have write rights in it ; write list = root, @lpadmin # A sample share for sharing your CD-ROM with others. ;[cdrom] ; comment = Samba server's CD-ROM ; read only = yes ; locking = no ; path = /cdrom ; guest ok = yes # The next two parameters show how to auto-mount a CD-ROM when the # cdrom share is accesed. For this to work /etc/fstab must contain # an entry like this: # # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don't want to use auto-mounting/unmounting make sure the CD # is mounted on /cdrom # ; preexec = /bin/mount /cdrom ; postexec = /bin/umount /cdrom smbusers: <nathan> = <"nathan"> Any help would be very much appreciated! Thanks!

  Read the article

• How to get the permissions right for /dev/raw1394

  - by Mark0978

  I recently upgraded one of my ubuntu machines to Karmic and I'm having trouble getting the permissions of /dev/raw1394 set to 0666. They only thing this machine is used for is recording audio from a firepod which uses /dev/raw1394 via jackd and there are no other FireWire devices connected, so security around this device is not really an issue. If I run as root, everything works as expected, but I have some folks that run the recorder that I don't want to have root access. However, I can't figure out which lines setup the perms I've tied this: /etc/udev/permissions.d/raw1394.rules:raw1394:root:root:0666 And I have this setup (default install) /lib/udev/rules.d/75-persistent-net-generator.rules:SUBSYSTEMS=="ieee1394", ENV{COMMENT}="Firewire device $attr{host_id})" /lib/udev/rules.d/75-cd-aliases-generator.rules:# the "path" of usb/ieee1394 devices changes frequently, use "id" /lib/udev/rules.d/75-cd-aliases-generator.rules:ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb|ieee1394", ENV{ID_CDROM}=="?*", ENV{GENERATED}!="?*", \ /lib/udev/rules.d/60-persistent-storage-tape.rules:KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394" /lib/udev/rules.d/50-udev-default.rules:# FireWire (deprecated dv1394 and video1394 drivers) /lib/udev/rules.d/50-udev-default.rules:KERNEL=="dv1394-[0-9]*", NAME="dv1394/%n", GROUP="video" /lib/udev/rules.d/50-udev-default.rules:KERNEL=="video1394-[0-9]*", NAME="video1394/%n", GROUP="video" /lib/udev/rules.d/60-persistent-storage.rules:KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}" /lib/udev/rules.d/60-persistent-storage.rules:KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n" And I find these lines in /var/log/syslog Apr 30 09:11:30 record kernel: [ 3.284010] ieee1394: Node added: ID:BUS[0-00:1023] GUID[000a9200c7062266] Apr 30 09:11:30 record kernel: [ 3.284195] ieee1394: Host added: ID:BUS[0-01:1023] GUID[00d0035600a97b9f] Apr 30 09:11:30 record kernel: [ 18.372791] ieee1394: raw1394: /dev/raw1394 device initialized What I can't figure out, is which line actually creates that raw1394 device in the first place. How do you get /dev/raw1394 to have permissions 0666?

  Read the article

• Macbook Pro 2010 Ethernet Jumbo Frame(9k MTU) Support?

  - by Troggy

  Has anyone been able to use jumbo frame support on their 2010 Macbook Pros? This is kind of negative news here, but I am seeing many reports that this is not available anymore due to Apple's choice of network card in the new machines. I cannot set my MTU speed over 1500 on my new 2010 MBP i7, but my old early 2008 MBP (Core2) has the 9000 MTU setting for use. Everything I have is setup to use jumbo frames and I thought apple kept that feature in their "pro" lineup. It sounds like the Mac Pro still has it. Did they decide to use a chipset that doesn't support it? I am trying to pinpoint some solid chipset numbers and the feature support. Maybe they just need to update the drivers? Is there some more official information about this feature? This might seem minor, but this is really frustrating if apple removed this feature from their pro laptop line. From what I have read so far, it sounds like I am not alone in my frustrations with this. http://discussions.info.apple.com/message.jspa?messageID=12258067 http://discussions.apple.com/thread.jspa?messageID=12130158 Anyone have any experience or further knowledge about this issue ... beyond typing my question into google and giving the top 5 results as answers? :)

  Read the article

• Is there a way to tell SGE to run specific jobs as root on the execution node?

  - by Rick Reynolds

  The title kinda says it all... We're using SGE/OGE to submit jobs to a set of worker nodes that then do things with specific pieces of equipment. The programs and scripts that have been created that manipulate this equipment rely on running as root. I'd like SGE to handle allocation of resources in a way that is mindful of users, groups, projects, etc., but I also need the actual jobs to run with root permissions. I've read up on How can one run a prologue script as root in gridengine? to see if anything there was pertinent, but it seems that SGE is providing the "user@" kind of spec specifically for prolog and epilog kinds of actions. Is there any similar functionality for the job itself? I'm aware of su/sudo approaches, but that won't really work in this environment because the sudoers file isn't globally managed (i.e. I'd have to add a whole set of users to /etc/sudoers on lots of machines). I'm currently looking into a setuid kind of solution, but that would definitely be an unnecessary kind of work-around if SGE provides me a way to declare that a specific job (or jobs in a specific queue) always needs to run with a specific user's rights.

  Read the article

• Leopard Network Shares and browsing are unreliable

  - by EvilChookie

  I have two macs, running Leopard 10.5.8. One is the 13" MBP connected via WiFi, and the other is a 24" 2008 iMac, connected via ethernet. There are at least another 6-10 machines (windows and mac) awake on the network (with shares) at any given time, yet there are plenty of times where I cannot see any devices/shares in either my "Shared" section in Finder, nor can I see any computers in "Network" in Finder. Restarting doesn't help. I've restarted all the networking gear in the house to no avail. Our network is a series of gigabit switches connected to a D-Link gaming router. I believe we use OpenDNS, and our provider is Cox. I hate having to use "Go - Connect to Server" to browse to commonly used file shares (by IP). I'd like to know why my shares do not always and consistently appear in Leopard. Edit: I ran OnyX this morning, and performed the cleaning and maintenance operations (including disk permissions) on both my Macs, and at least one of my macs has started showing network devices again. (the other is still going). No idea how long this will last. Any ideas as to what is causing this issue, and how to prevent it? Edit 2: Aaaand there the shares go again. So running OnyX is not a permanent or reliable fix for this issue. Edit 3: After a clean reinstall and update, network shares are still unreliable. The SMBClient command mentioned in comments shows me the information it's supposed to show, but the shares do not appear in the shared section. They'll also vanish at random and reappear at random throughout the day.

  Read the article

• Mac Management and Security

  - by Bart Silverstrim

  I was going through some literature on managing OS X laptops and asked someone some questions about usage scenarios when using the MacBooks. I asked someone more knowledgeable than I about whether it was possible for my Mac to be taken over if I were visiting another site for a conference or if I went on a wifi network at a local coffee house with policies from an OS X Server with workgroup manager (either legit for the site or someone running a version of OS X Server on hardware they have hidden somewhere on the network), which apparently could be set up to do things like limit my access to Finder or impose other neat whiz-bang management features. He said that it is indeed possible for it to happen as it would be assigned via the DHCP server and the OS X server would assume my Mac is a guest and could hand out restrictions and apparently my Mac will happily accept them without notifying me or giving me an option, unlike Windows which I believe would need to be joined to a domain before it becomes "managed" by Active Directory. So my question is as network admins and sysadmins with users traveling with MacBooks, is there a way to reasonably protect your users from having their machines hijacked without resorting to just turning off networking all the time? Or isn't this much of a security hazard? What threat does this pose to the road warriors in your businesses?

  Read the article

• Word documents very slow to open over network, but fine when opened locally - on one machine

  - by Craig H

  Windows XP, Word 2003, patched. The issue is happening with several Word documents stored on a network drive. The Word documents are clearly a bit wonky (i.e. one is 675k, but if you copy everything but the last paragraph marker into a new document, the new document is only 30k). But that's only part of the problem. On one weird machine, and one machine only, it takes ~20 seconds to open these Word documents from the network drive. Copy the file to C: on that werid machine? Opens immediately. Go to other machines (that are very similar - same patch level, etc.) and open the same document from the network? Opens immediately. Delete normal.dot? 20 seconds. Login with a different user on the weird machine? 20 seconds. Plug wonky machine into a different network port? 20 seconds. So the problem appears to be hardware related (i.e. wonky internal NIC) or related to a setting that is not profile specific. Any ideas? "Scrubbing" all the documents isn't ideal for several reasons. This is driving me nuts because I swear I ran into this before many years ago and eventually figured it out. But I appear to have lost my notes.

  Read the article

• Reloading NAT configuration on a running VMWare Server 2.0.2

  - by Jonathan Clarke

  I have a server running VMWare Server 2.0.2. The host is Debian Lenny. I have 15-20 virtual machines running, all attached to a single NAT network (named vmnet8). I have configured VMWare's NAT (the vmnet-natd daemon) to forward some incoming to ports to one of the VMs, since it hosts some publicly accessible services. I did this via the file /etc/vmware/vmnet8/nat/nat.conf by adding lines like the following: 80 = 192.168.100.100:80 This works great, I can reach the web server on the VM at 192.168.100.100 by connecting to the host's IP address. Sometimes, I need to add port redirections to this NAT configuration. So, I add a line to the configuration file. Now for the question. How do I make the natd process take this new configuration into account? Clearly, restarting the host machine does take it into account, and the newly added port is forwarded. However, this is not an option on this server, so how should one do this without restarting the whole host? Thanks for any ideas!

  Read the article

• Running Mathematica-5 remotely

  - by oxinabox.ucc.asn.au

  I have Mathematica 5 - a powerful CAS. I have a cheap netbook (running Windows XP), wich not only is too slow to run mathmatica on, I doubt it has the harddrive space. I do however have remote access to a number of very powerful computers, (most of wich run variose Linuxes, but one of which is Windows Server 2008, though I'ld rather not use this one*). Mostly over SSH but other protocols can be arraged for some, I'm sure. So I'ld like to install Mathematica onto one of these machine and then run it remotely. Either from the command line via Putty or via some other method. I glanced through the mathematical documentation and read something about using some MathLink program, which links the front end installed on my computer to a remote kernel. Anyone have any experience with this? I'm not sure if this belongs here or in SuperUser. At the moment, it's being tinkered with, and when the tinkering stops it'll likely be used to run multiple thin terms. As compared to the Linux machines: I have access to a dual 2.4 Xeon with 3GB RAM, which the rest of the world seems to have completely forgotten about (runs freeBSD!).

  Read the article

< Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >