Search Results

Search found 15247 results on 610 pages for 'state machines'.

Page 409/610 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >

• Hardware reserved memory issue

  - by Robert Koritnik

  I've seen lots of folks having problem with hardware reserved memory issue in Windows 7/Server 2008 R2. I have it myself but not as huge as others have. Problem description When you install Windows 7 (or its bigger brother Windows Server 2008 R2) your memory may not be fully utilised. If you look at Task Manager > Performance Tab > Resource Monitor > Memory Tab And scroll to the bottom of the list you will see a graphical representation of your memory. Some of it may be hardware reserved. Previous Windows versions didn't have this problem. System was able to utilise all memory available. Question Is there any solution to lower/remove hardware reserved memory? Sidenote I tried installing 32 and 64 bit versions but to no avail. I also tried both Windows: 7 and Server 2008 R2. But always get the same amount reserved by HW. On previous Windows versions I had more memory available because I'm simultaneously running 2 VMs on host (so three machines all together). And my memory peaks much higher now as it did on older versions.

  Read the article

• SATA drives or chipset throwing DRDY ERR and ICRC ABRT

  - by Matt

  I have an SD-VIA-1A2S PCI card with 2 sata ports (and one ATA-133 that isn't used). Two new Western Digital Caviar Green drives (WD10EARS 1TB) throw repeated errors in kern.log (removed date/time/host info for brevity): [ 7.376475] ata2.00: exception Emask 0x12 SAct 0x0 SErr 0x1000500 action 0x6 [ 7.376480] ata2.00: BMDMA stat 0x5 [ 7.376483] ata2: SError: { UnrecovData Proto TrStaTrns } [ 7.376489] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 7.376490] res 51/84:2f:20:00:00/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 7.376493] ata2.00: status: { DRDY ERR } [ 7.376495] ata2.00: error: { ICRC ABRT } [ 7.376504] ata2: hard resetting link I'm using Ubuntu 9.04 - 2.6.28-18-generic, though I have tried live cds of Ubuntu 9.10, Fedora 12 and OpenSUSE 11.2 - all running various 2.6.31 kernels - and all received the same error. Based on testing these drives and this card in two other machines and combos of connecting the drives directly to the motherboard or the add-in card, I'm relatively convinced that it's the VIA chipset that is the problem. Another computer that also has an onboard VIA SATA chipset (like the add-in card) produces the same errors when the drives are directly on that motherboard. I have been able to verify that the drives are perfectly good, and I tried everything I can think of in terms of swapping cables, psu isn't overloaded, etc. The error happens on boot once or twice, after using fdisk on the drive once or twice, and constantly when attempting to sync a new mdadm raid 1 array created on the two drives. Any thoughts on where to go from here - driver/kernel wise? I'm completely open to buying a new PCI add-in card if someone can recommend one with 2 internal sata ports that works well in Debian/Ubuntu. Thanks!

  Read the article

• cPanel web servers mounting home partition to a NAS or SAN

  - by Scott

  Hello, I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

  Read the article

• Is anyone using KVM in production?

  - by Andy Shellam

  I've been trying to set up a pair of servers utilising KVM on Ubuntu 9.10 to host 8 virtual machines between them and ended up with various issues from the VMs freezing, to not powering on. I had one virtual server set up and running and was setting up a second, when any operation involving OpenSSL would cause the VM to lock up in a weird way - all network traffic would cease, it wouldn't process logins on the console, but it wasn't taking any CPU time off the host. The first virtual server was identical and worked perfectly. Another VM I tried to setup had installed Ubuntu fine then refused to reboot, throwing kernel exceptions to do with XFS. I've now installed Citrix XenServer 5.5 on both hosts, and am now setting up my third VM with absolutely no issues. I also had the same experience when I tried VMware, but I preferred Xen as it appears to give more features on the free license. My question is am I just unlucky with KVM, or is KVM as unstable as it appears? Are you using, or planning on using, KVM in production, and how successful have you been?

  Read the article

• Configuration management in support of scientific computing

  - by Sharpie

  For the past few years I have been involved with developing and maintaining a system for forecasting near-shore waves. Our team has just received a significant grant for further development and as a result we are taking the opportunity to refactor many components of the old system. We will also be receiving a new server to run the model and so I am taking this opportunity to consider how we set up the system. Basically, the steps that need to happen are: Some standard packages and libraries such as compilers and databases need to be downloaded and installed. Some custom scientific models need to be downloaded and compiled from source as they are not commonly provided as packages. New users need to be created to manage the databases and run the models. A suite of scripts that manage model-database interaction needs to be checked out from source code control and installed. Crontabs need to be set up to run the scripts at regular intervals in order to generate forecasts. I have been pondering applying tools such as Puppet, Capistrano or Fabric to automate the above steps. It seems perfectly possible to implement most of the above functionality except there are a couple usage cases that I am wondering about: During my preliminary research, I have found few examples and little discussion on how to use these systems to abstract and automate the process of building custom components from source. We may have to deploy on machines that are isolated from the Internet- i.e. all configuration and set up files will have to come in on a USB key that can be inserted into a terminal that can connect to the server that will run the models. I see this as an opportunity to learn a new tool that will help me automate my workflow, but I am unsure which tool I should start with. If any member of the community could suggest a tool that would support the above workflow and the issues specific to scientific computing, I would be very grateful. Our production server will be running Linux, but support for OS X would be a bonus as it would allow the development team to setup test installations outside of VirtualBox.

  Read the article

• Configuration management in support of scientific computing

  - by Sharpie

  For the past few years I have been involved with developing and maintaining a system for forecasting near-shore waves. Our team has just received a significant grant for further development and as a result we are taking the opportunity to refactor many components of the old system. We will also be receiving a new server to run the model and so I am taking this opportunity to consider how we set up the system. Basically, the steps that need to happen are: Some standard packages and libraries such as compilers and databases need to be downloaded and installed. Some custom scientific models need to be downloaded and compiled from source as they are not commonly provided as packages. New users need to be created to manage the databases and run the models. A suite of scripts that manage model-database interaction needs to be checked out from source code control and installed. Crontabs need to be set up to run the scripts at regular intervals in order to generate forecasts. I have been pondering applying tools such as Puppet, Capistrano or Fabric to automate the above steps. It seems perfectly possible to implement most of the above functionality except there are a couple usage cases that I am wondering about: During my preliminary research, I have found few examples and little discussion on how to use these systems to abstract and automate the process of building custom components from source. We may have to deploy on machines that are isolated from the Internet- i.e. all configuration and set up files will have to come in on a USB key that can be inserted into a terminal that can connect to the server that will run the models. I see this as an opportunity to learn a new tool that will help me automate my workflow, but I am unsure which tool I should start with. If any member of the community could suggest a tool that would support the above workflow and the issues specific to scientific computing, I would be very grateful. Our production server will be running Linux, but support for OS X would be a bonus as it would allow the development team to setup test installations outside of VirtualBox.

  Read the article

• Samba Server Make Multiple User Permissions Profiles

  - by Scriptonaut

  I have a Samba file server running, and I was wondering how I could make multiple user accounts that have different permissions. For example, at the moment I have a user, smbusr, but when I ssh to the share, I can read, write, execute, and even navigate out of the samba directory and do stuff on the actual computer. This is bad because I want to be able to give out my IP so friends/family can use the server, but I don't want them to be able to do just anything. I want to lock the user in the samba share directory(and all the sub directories). Eventually I would like several profiles such as (smbusr_R, smbusr_RW, smbguest_R, smbguest_RW). I also have a second question related to this, is SSH the best method to connect from other unix machines? What about VPN? Or simply mounting like this: mount -t ext3 -o user=username //ipaddr/share /mnt/mountpoint Is that mounting command above the same thing as a vpn? This is really confusing me. Thanks for the help guys, let me know if you need to see any files, or need anymore information.

  Read the article

• Samba Server Make Multiple User Permissions Profiles

  - by Scriptonaut

  I have a Samba file server running, and I was wondering how I could make multiple user accounts that have different permissions. For example, at the moment I have a user, smbusr, but when I ssh to the share, I can read, write, execute, and even navigate out of the samba directory and do stuff on the actual computer. This is bad because I want to be able to give out my IP so friends/family can use the server, but I don't want them to be able to do just anything. I want to lock the user in the samba share directory(and all the sub directories). Eventually I would like several profiles such as (smbusr_R, smbusr_RW, smbguest_R, smbguest_RW). I also have a second question related to this, is SSH the best method to connect from other unix machines? What about VPN? Or simply mounting like this: mount -t ext3 -o user=username //ipaddr/share /mnt/mountpoint Is that mounting command above the same thing as a vpn? This is really confusing me. Thanks for the help guys, let me know if you need to see any files, or need anymore information.

  Read the article

• windows 8.1 upgrade fails with error code 0xc1900101-0x20017

  - by cmorse

  I just tried to install windows 8.1 on my laptop, but it fails to install with the message: Sorry we couldn't complete the update to Windows 8.1. We restored your previous version of Windows to this PC 0xC1900101 - 0x20017 It looks like on the first boot that the laptop is going to the PC restore screen (it asks what kind of keyboard I have, and then what repair optins I would like to take). Thus far I have just been selecting "Continue to windows 8." I'm running a Lenovo x220i tablet. I've got 43GB of free disk space. It installed just fine on my desktop. The primary difference between the two machines is that the desktop has media center install, and isn't using TrueCrypt. Full WindowsUpdate.log http://pastebin.com/hGmAW4Q1 Most important portion of WindowsUpdate.log: 2013-10-17 10:41:06:671 964 694 Agent ************* 2013-10-17 10:41:06:671 964 694 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2013-10-17 10:41:06:671 964 694 Agent ********* 2013-10-17 10:41:06:671 964 694 Agent * Online = No; Ignore download priority = No 2013-10-17 10:41:06:671 964 694 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2013-10-17 10:41:06:671 964 694 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service 2013-10-17 10:41:06:671 964 694 Agent * Search Scope = {Machine & All Users} 2013-10-17 10:41:06:671 964 694 Agent * Caller SID for Applicability: S-1-5-18 2013-10-17 10:41:07:233 964 870 Report REPORT EVENT: {AD47FBDC-F7F9-4E7F-BAF4-DBA3784C7101} 2013-10-17 10:41:06:436-0600 1 202 [AU_REBOOT_COMPLETED] 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed. 2013-10-17 10:41:07:233 964 870 Report REPORT EVENT: {8D4E7A67-9526-4702-A897-5BE5F97497AF} 2013-10-17 10:41:06:639-0600 1 204 [AGENT_INSTALLING_FAILED_POST_REBOOT] 101 {8951E70D-4332-4F7C-B92D-D9362E384959} 1 c1900101 WSAcquisition Failure Content Install Installation Failure Post Reboot. 2013-10-17 10:41:07:249 964 870 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8 2013-10-17 10:41:07:249 964 870 Report WER Report sent: 7.8.9200.16715 0xc1900101(0x20017) 8951E70D-4332-4F7C-B92D-D9362E384959 Install 101 Unmanaged 2013-10-17 10:41:07:249 964 870 Report CWERReporter finishing event handling. (00000000)

  Read the article

• PXE with WDS & Windows Server 2012 - no filename option in DHCP lease?

  - by user1799

  I'm trying to configure Windows Server 2012 (a virtual box VM) with WDS so I can PXE boot some Windows 7 VMs (also virtual box). All the machines involved are only attached to the "host only network", 192.168.56.0/24. The Server 2012 machine has been setup as an AD DS machine, has DNS installed and working along with DHCP with option 60 - PXEClient - set and WDS is set to not listen on DHCP ports. I've followed http://technet.microsoft.com/en-us/library/jj648426.aspx very closely. I've used the boot.wim and install.wim files from the Win 7 installation DVD and they're configured as 'boot' and 'installation' images respectively. When I boot the target machine, it gets an IP address, but I simply get 'no filename' and the boot won't proceed any further. I've tried setting option 66 to 192.168.56.2 (the WDS server) and option 67 to both Boot\x64\wdsnbp.com and Boot\x64\pxeboot.n12 but all to no avail. I can't seem to see anything in the event log, either. Can anyone out there spot what I'm doing wrong? Or give tips to narrow down a diagnostic?

  Read the article

• ClearOS - how to create a site to site VPN between two ClearOS boxes?

  - by Scott Szretter

  I plan on setting up some ClearOS boxes at several sites, and would like to set up site-to-site VPN between the remote sites and a main site (all running ClearOS enterprise 5.2sp1 / latest version). I have found references for how to set up ClearOS to VPN in to devices such as cisco for IPSEC, and others with PPTP. But for these methods it did not mention how you might configure 2 ClearOS boxes to talk to each other ipsec or pptp. I also saw documentation on installing OpenVPN and using the OpenVPN client software to VPN in to the ClearOS box. I will probably use this for individual users to VPN in, but I have some small sites ( 1 to 10 users) that will have their own ClearOS box and need to create a site to site VPN link back to the main site's OpenVPN box. Is this possible, can you point me to docs, or other info or basically, how? A couple updates: I did find a thread that asks the same basic question, where the user has a vpn set up between the two clearos machines (after installing ipsec vpn modules), just not transporting traffic between the LANS - and the very last post claims you have to edit some files (/etc/ipsec.conf) and set leftnexthop rightnexthop values to %direct. After that, it's supposed to work. Could it be that simple? I also posted to clear foundation, and they pointed me to some documentation for setting up ipsec unmanaged vpn. This looks pretty good, but, I will most likely need to figure out how to handle a dynamic dns type setup at least on one end. Also, what does it mean by multi-wan? Finally, what happens when a vpn connection goes down exactly - someone has to reboot the box or ?

  Read the article

• Bridging Virtual Networking into Real LAN on a OpenNebula Cluster

  - by user101012

  I'm running Open Nebula with 1 Cluster Controller and 3 Nodes. I registered the nodes at the front-end controller and I can start an Ubuntu virtual machine on one of the nodes. However from my network I cannot ping the virtual machine. I am not quite sure if I have set up the virtual machine correctly. The Nodes all have a br0 interfaces which is bridged with eth0. The IP Address is in the 192.168.1.x range. The Template file I used for the vmnet is: NAME = "VM LAN" TYPE = RANGED BRIDGE = br0 # Replace br0 with the bridge interface from the cluster nodes NETWORK_ADDRESS = 192.168.1.128 # Replace with corresponding IP address NETWORK_SIZE = 126 NETMASK = 255.255.255.0 GATEWAY = 192.168.1.1 NS = 192.168.1.1 However, I cannot reach any of the virtual machines even though sunstone says that the virtual machine is running and onevm list also states that the vm is running. It might be helpful to know that we are using KVM as a hypervisor and I am not quite sure if the virbr0 interface which was automatically created when installing KVM might be a problem.

  Read the article

• Why are UDP messages from outside the network received but not delivered?

  - by Warren Pena

  I have an Ubuntu Server 10.04 application I've developed that receives messages over a UDP port. The ultimate purpose of this application is to receive messages sent from workers' 3G modems out in the field. If use netcat on either another ubuntu Server or my Vista laptop (both on the same LAN as my test machine) to send a message, the message arrives correctly and appears in my application. However, if I go out to my car and use its 3G modem to send a message from the same Vista laptop, it doesn't work. If I run tcpdump -A, I see the message arrive correctly, but it's never delivered to my application. Clearly, the OS is the one making the choice not to deliver the messages (else they wouldn't appear in tcpdump nor would my app receive them when coming from local machines). I have not installed any firewall software on this machine, nor am I aware of anything installed by default that would block the traffic. sudo iptables --list returns Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I'm not too familiar with iptables, but it looks to me like that's telling it to not do anything. What could be going on that's preventing my messages from being delivered?

  Read the article

• SNMPD running but not listening for connections at random

  - by Lukasz

  OS: CentOS release 5.7 (Final) Net-SNMP: net-snmp-5.3.2.2-14.el5_7.1 (from RPM) Periodically my NMS notifies me that SNMP has gone down on this machine. The service is restored in between 10 to 30 minutes. My NMS also pings and check SSH and those services are not affected during the SNMP outage. SNMPD log file shows that it is working and apparently receiving packets (either from local agents from 127.0.0.1 or from my NMS at 172.16.37.37) however attempting to snmpwalk locally or from the NMS system fails with a timeout. I have 7 of these servers running mixture of CentOS 5.7 and RHEL 5.7 with this specific version of Net-SNMP installed from RPM - none of them have this issue except this one. 5 of the machines (including the NMS system and this problem server) are in the same rack connected using one switch. Restarting SNMPD does not fix the issue - it clears up by itself eventually. Any suggestions where I can begin diagnosing the issue? It's a closed subnet so IPTables is not used. SNMPD config below: # Following entries were added by HP Insight Management Agents at # Tue May 15 10:58:17 CLT 2012 dlmod cmaX /usr/lib64/libcmaX64.so rwcommunity public 127.0.0.1 rocommunity public 127.0.0.1 rwcommunity 3adRabRu 172.16.37.37 rocommunity 3adRabRu 172.16.37.37 rwcommunity 3adRabRu 172.16.37.36 rocommunity 3adRabRu 172.16.37.36 trapcommunity callmetraps trapsink 172.16.37.37 callmetraps trapsink 172.16.37.36 callmetraps syscontact Lukasz Piwowarek syslocation Santiago, Chile # ---------------------- END -------------------- agentAddress udp:161 com2sec rwlocal default public com2sec rolocal default public com2sec subnet default 3adRabRu group rwv2c v2c rwlocal group rov2c v2c rolocal group rov2c v2c subnet view all included .1 access rwv2c "" any noauth exact all all none access rov2c "" any noauth exact all none none

  Read the article

• SSH Tunnel for Remote Desktop via Intermediary Server Part II

  - by Mihai Todor

  I asked previously how to configure 2 SSH tunnels using an intermediary server in order to run Remote Desktop through them and I managed to make it work. Now, I'm trying to do the same, using the same machines, but in reverse order. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, on which I wish to do Remote Desktop from the PC. I use Putty on the laptop to create a reverse tunnel from it to the Linux server: R60666 localhost:3389. I use Putty on the PC to create a regular tunnel from it to the Linux server: L60666 localhost:60666. I SSH to the Linux sever and I run telnet localhost 60666 and it seems to produce the expected output, as described in the debugging tips that I received here. I try to connect Remote Desktop from the PC to the laptop: localhost:60666. It asks for my username and password, I click OK and it locks my current session on the laptop (so I see the welcome screen on the laptop instead of my desktop), it shows the "Welcome" message in the Remote Desktop screen and then it just goes black. It doesn't disconnect, it doesn't provide any error and I'm not able to perform any actions in the Remote Desktop screen. I tried the same setup with a Windows XP laptop and I'm experiencing the same symptoms. I also tried to use different ports than 60666, but nothing changed. Does anybody have any idea what I'm doing wrong? Update: As pointed out by @jwinders, I'm not able to run telnet PC 3389 from the Linux server directly. Since Windows Firewall has a rule to allow all connections on port 3389, I have no idea what is blocking it. Fortunately, I'm able to create a SSH tunnel from the Linux machine to the PC ssh 3389:localhost:3389 'domain\user'@PC.

  Read the article

• SAN with iSCSI-Target Performance Horrendous

  - by Justin

  We have a poor man's SAN setup in a 1U Ubuntu server running iSCSI-Target with two 300GB drives in RAID-0. We then are using it for block level storage for virtual machines. The hypervisor is connected to the SAN via gigabit on a dedicated VLAN and interfaces. We only have a single virtual machine setup and doing some benchmarks. If we run hdparm -t /dev/sda1 from the virtual machine, we get 'ok' performance of 75MB/s from the virtual machine to the SAN. Then we basically compile a package with ./configure and make. Things start ok, but then all the sudden the load average on the SAN grows to 7+ and things slow down to a crawl. When we SSH into the SAN and run top, sure the load is 7+, but the CPU usage is basically nothing, also the server has 1.5GB of memory available. When we kill the compile on the virtual machine, slowly the LOAD on the SAN goes back to sub 1 figures. What in the world is causing this? How can we diagnosis this further? Here are two screenshot from the SAN during high load. 1> Output of iotop on the SAN: 2> Output of top on the SAN:

  Read the article

• SCVMM 2008 R2 problems migrating VM from VS2005 to Hyper-V host

  - by Scott Ivey

  I have System Center Virtual Machine Manager 2008 R2 installed, and have a Hyper-V R2 host and a Virtual Server 2005 host. I'm trying to migrate my machines from the VS2005 host to the Hyper-V host, and keep getting the following error... VMM is unable to complete the requested file transfer. The connection to the HTTP server myserver.mydomain.local could not be established. (Unknown error (0x80072efd)) Recommended Action Ensure that the HTTP service and/or the agent on the machine myserver.mydomain.local are installed and running and that a firewall is not blocking HTTPS traffic. (Note - migrations between Hyper-V hosts managed by the VMM server work fine - my problem is just going from VS2005-Hyper-V hosts) I have no firewalls turned on on either of the servers, and no firewalls in the middle. I've looked all over for answers to this problem, and am getting nowhere. All the articles I find when searching are talking about either V2V or P2V - and i'm just trying to do a straight migrate VM. I've tried rebooting the boxes, changing the BITS SSL port number, restarting services, triple-checking firewalls, etc. Does anyone have any good suggestions as to how I can resolve this problem?

  Read the article

• LDAP change user pass on client

  - by Sean

  I am trying to allow ldap users to change their password on client machines. I have tried pam every which way I can think of /etc/ldap.conf & /etc/pam_ldap.conf, as well. At this point I'm stuck. Client: Ubuntu 11.04 Server: Debian 6.0 The current output is this: sobrien4@T-E700F-1:~$ passwd passwd: Authentication service cannot retrieve authentication info passwd: password unchanged /var/log/auth.log gives this during the command: May 9 10:49:06 T-E700F-1 passwd[18515]: pam_unix(passwd:chauthtok): user "sobrien4" does not exist in /etc/passwd May 9 10:49:06 T-E700F-1 passwd[18515]: pam_ldap: ldap_simple_bind Can't contact LDAP server May 9 10:49:06 T-E700F-1 passwd[18515]: pam_ldap: reconnecting to LDAP server... May 9 10:49:06 T-E700F-1 passwd[18515]: pam_ldap: ldap_simple_bind Can't contact LDAP server getent passwd |grep sobrien4 (note keeping short since testing with that account, however it outputs all ldap users): sobrien4:Ffm1oHzwnLz0U:10000:12001:Sean O'Brien:/home/sobrien4:/bin/bash getent group shows all ldap groups. /etc/pam.d/common-password (Note this is just the most current, I have tried a lot of different options): password required pam_cracklib.so retry=3 minlen=8 difok=3 password [success=1 default=ignore] pam_unix.so use_authtok md5 password required pam_ldap.so use_authtok password required pam_permit.so Popped open wireshark as well, the server & client are talking. I have the password changing working on the server. I.E. the server that runs slapd, I can log in with the ldap user and change the passwords. I tried copying the working configs from the server initially and no dice. I also tried cloning it, and just changing ip & host, and no go. My guess is that the client is not authorized by ip or hostname to change a pass. Pertaining to the slapd conf, I saw this in a guide and tried it: access to attrs=loginShell,gecos by dn="cn=admin,dc=cengineering,dc=etb" write by self write by * read access to * by dn="cn=admin,dc=cengineering,dc=etb" write by self write by * read So ldap seems to be working okay, just can't change the password.

  Read the article

• How do I connect two computers with a LAN cable?

  - by John

  I have two machines - Windows XP and a laptop using Windows 7. I connected them with a WLAN cable. On the Windows XP machine, I set the IP address to 192.168.0.10. On the Windows 7 laptop, I set the IP address to 192.168.0.20. The laptop can see the Windows XP machine, but Windows XP machine cannot see the Windows 7 machine. But this does NOT concern me. I want to move the files from my desktop (Windows XP) to Windows 7 (laptop). That's why I'm going through all this. The problem is that when I try to connect from Windows 7 to Windows XP machine, I get this window: I don't understand what username/password is needed. I use none on the Windows XP machine. I tried all usernames - no success. Please explain in deep details how to solve my problem so I can connect to my Windows XP machine. EDIT: Maybe this can help: the Windows XP machine is named 'I' and '???????? III' is the name of the laptop. Both computers share one workgroup - WORKGROUP.

  Read the article

• Hyper V Server 2012 Remote Management Using Workgroup

  - by Chris Kolenko

  I'm trying to remotely manage Hyper V server 2012 from a windows 8 pc, both client and server are on a workgroup. I've spent about 3-4 hours trying to get this working with no luck so far trying the following: Creating a new administrator on the server with the same details as the client ie. username / password. Add an entry into my hosts file to point to the remote ip by server name. Tried using HVRemote. Disabled both firewalls. The error that I'm getting is RPC Service Unavailable. How can I accomplish what I'm trying to do? Update Some of the operations on the Hyper-V Manager work. IE. Virtual Switch Works. I can open the New VM Wizard. I run into an error when creating a new Virtual Hard Disk tho. I've tried creating a VM without a hard disk, which works. Using the new hard disk wizard does not work either. I still can not see any Virtual Machines. RPC server unavailable. Unable to establish communication between 'ServerName' and 'ClientName'

  Read the article

• signed applet automatically running as insecure

  - by Terje Dahl

  My application is deployed as a self-signed applet to several thousand users at more than 50 schools across the country (in Norway). The user is presented with the standard Java security warning asking if they will accept the signature. When they do, the applet runs perfectly. However, about half a year ago a group of 7 school, all under a common IT department, stopped getting the security warning. In stead the applet loads and starts running in untrusted mode, without first giving the user an option to accept or reject the signature. The problem is on Windows machines, and only when the machine is connected to the schools network. If they take the same machine home with them, the program functions as it should, with security warnings and everything. I know little about Window systems in general, but I would think it would be some sort of policy-file or something that is loaded when a machine hooks up to/through the schools network. Furthermore, the problem only started occurring in these 7 schools after changes made after a security breach they had a while back. The IT department is stumped. I am stumped. Any thoughts, comments, suggestions?

  Read the article

• Windows Server 2008R2 - can't change or remove the default gateway

  - by disserman

  We've installed VMWare Server 2.0 on Windows 2008R2. After some time playing with it (actually only removing host-only and nat networks, and binding adapters to the specified vmnets) we've noticed a strange problem: if you change or remove the default gateway on the network card, the server completely loses a network connection you can't ping it from the subnet, it also can't connect to anyone. When the gateway is removed and a server tries to connect to the other machines, I can see some incoming packets using a sniffer, but I believe they are damaged in some kind (I'm not a mega-guru in TCP/IP and can't find a mistake in a binary translation of the packet) because the other side doesn't respond. What we tried: removed vmware server using add/remove programs deleted everything related to the vmware server and all installed network adapters in the windows registry double checked for the vmware bridged protocol driver file, it's physically absent and no any links in the registry. performed a tcp/ip reset with netsh and disabled/enabled all network adapters in the device manager to recreate a registry keys for them. tried another network adapter. and the situation is the same: as soon you remove or change the default gateway, windows stops working. The total absurd of the situation is that the default gateway points to the non-existing IP. But when it's set, you can ping a server from the subnet, when you remove it - you can't. Any help? I'm starting thinking the new build of the VMWare Server is some kind of the malware... :)

  Read the article

• Performance of file operations on thousands of files on NTFS vs HFS, ext3, others

  - by peterjmag

  [Crossposted from my Ask HN post. Feel free to close it if the question's too broad for superuser.] This is something I've been curious about for years, but I've never found any good discussions on the topic. Of course, my Google-fu might just be failing me... I often deal with projects involving thousands of relatively small files. This means that I'm frequently performing operations on all of those files or a large subset of them—copying the project folder elsewhere, deleting a bunch of temporary files, etc. Of all the machines I've worked on over the years, I've noticed that NTFS handles these tasks consistently slower than HFS on a Mac or ext3/ext4 on a Linux box. However, as far as I can tell, the raw throughput isn't actually slower on NTFS (at least not significantly), but the delay between each individual file is just a tiny bit longer. That little delay really adds up for thousands of files. (Side note: From what I've read, this is one of the reasons git is such a pain on Windows, since it relies so heavily on the file system for its object database.) Granted, my evidence is merely anecdotal—I don't currently have any real performance numbers, but it's something that I'd love to test further (perhaps with a Mac dual-booting into Windows). Still, my geekiness insists that someone out there already has. Can anyone explain this, or perhaps point me in the right direction to research it further myself?

  Read the article

• Windows Authentication behaves oddly when VPN'd

  - by Dan F

  Hi all We've got a few apps that rely on windows authentication - a couple of web apps with AD auth turned on and we usually connect to our SQL servers with windows auth. This normally runs without a hitch. It doesn't work so well if we're VPN'd to a client site though. SSMS Opening SSMS normally from the start menu, then picking a server that normally accepts windows auth, results in a message saying: Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. (.Net SqlClient Data Provider) If I drop to a command prompt and use runas /user:domain\user to launch SSMS I can successfully windows auth to our SQL server instances with that ssms process. If I look in task manager, both copies of ssms.exe (start menu vs runas) have the same user, and I can see no discernible differences between the processes in procexp. AD Auth websites If I open IE and browse to any of our websites that require an authenticated windows user, I get the "who are you" prompt, and that dialog thinks I'm whoever the VPN user is. I can click "Use another account" and authenticate that way though. Outlook Even Outlook prompts for a username when we are VPN'd! It's affecting our Win7 and Vista machines. It's been a while since we had an XP box, but I don't recall having this issue on XP for what it's worth. The VPN connections are just using the built in windows VPN connections, they're not fancy cisco VPNs or anything of that nature. Does anyone know how to tell windows that I'd like to be my normal old primary domain user rather than the VPN user when authenticating to resources in our domain? Heck, I'd be happy with a solution that prompted me with the "who are you" if I was trying to access windows auth requiring resources on the client's VPN. Thanks! Apologies if this is more a superuser question, I wasn't sure which site it best suited. It's about networking and infrastructure and plagues all of our developers here, so I hope it's a serverfault Q.

  Read the article

• Bind9 DNS help with psuedo domains

  - by Tempname

  I have setup a dns server on my home network to manage some apps that I have written for home. Currently I have 3 "domains" that I am using: controller devserver fileserver The first issue that I am having is that when I attempt to ping the parent domain of any of these 3 I am unable to. I simply get ping: unknown host controller. I however can ping any of the subdomains I have setup for these 3 parent domains. The second issue is I am unable to ping any of the 3 parent domains or any child domains from my window machines. I have verified that these domains work on other devices in my house (ipod touch, ipad, cell phone). Any help with this is greatly appreciated Here is bind data file for my parent domain controller: ; ; BIND data file for local loopback interface ; $TTL 604800 @ IN SOA controller. admin.controller. ( 9 604800 86400 2419200 604800 ) ; @ IN NS controller. @ IN A 192.168.1.104 controller IN A 192.168.1.194 admin.controller. IN A 192.168.1.104

  Read the article

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >