Search Results

Search found 18464 results on 739 pages for 'virtual functions'.

Page 410/739 | < Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >

• Ethernet interface number changed, and old one does not exist, but does not leave IP address

  - by Sagar

  I have a virtual machine with Mandriva 2007.0 (yes, old - unfortunately we do not have a choice here). Anyway, the problem: Before reboot: active network interface = eth0. No other interfaces present, and network manager confirms this. Static IP address set to 172.31.2.22. No issues, everything working properly, routing et al. -------Reboot--------- After reboot: active network interface = eth1, with a DHCP address. Network manager shows eth0 as disconnected, and not connectable. When I try to set eth1 up with the static IP address (same one), it says "In Use". I then tried ifconfig eth0 172.31.2.29 just to free it up from the eth0 interface so I could use it with eth1 (since this is connected). Result: ifconfig eth0 172.31.2.29 SIOCSIFADDR: No such device eth0: unknown interface: No such device Nothing else changed. Any ideas what could be happening, or at least how I can get my IP address back?

  Read the article

• KVM-Guests can't get past bridge - no internet connection

  - by tmn29a

  I'm running a backported KVM on a Debian Squeeze. ATM the KVM-Guest can't connect to the internet through the bridge I have set up. The guests can reach each other, the host but nothing outside. I can neither ping, nslookup or do anything to a remote address. The guest are configured to have a static IP. When I didn;t have the bridge but a virtual bridge (the KVM-default) the guest could connect fine. After setting up the bridge things broke, so I think the problem lies there. # The loopback network interface auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.XXX.XXX.84 netmask 255.255.255.192 network 10.XXX.XXX.64 gateway 10.XXX.XXX.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports eth0 eth1 address 172.xxx.xxx.65 broadcast 172.xxx.xxx.127 netmask 255.255.255.192 gateway 172.xxx.xxx.65 bridge_stp on bridge_maxwait 0 Thanks in advance for your help !

  Read the article

• Citrix XenServer iSCSI shared disk?

  - by chsguy

  I am running Citrix XenServer Essentials 5.5, with VMs stored on an EqualLogic iSCSI shelf, using XenServer's StorageLink. I would like to create a "virtual disk" that can be attached to multiple VMs. This would be used for a cluster file system like OCFS2 or GFS. This doesn't seem possible using the XenCenter GUI and I can't find anything online about how to do it. I realize I could simply expose the iSCSI network to the VM and have the VM initiate its own iSCSI, but that creates a lot of security challenges. This was pretty easy to do on Oracle VM Server, which is Xen based, so I know it's not a limitation of Xen itself. Maybe there is an "xe-" command for this? Thanks for any suggestions you can provide.

  Read the article

• Pfsense: Inbound Load Balancing https with sticky connection

  - by Zeux

  first of all I'm very sorry for my English... This is my scenario: Internet Firewall+LB: pfsense_1(Active) + pfsense_2(Passive) in CARP Pool servers: 3 x nginx(PHP5+HTTP+HTTPS) Pfsense 1 and 2 CARP configured with Virtual IP (pubblic). Nginx servers's ips are all private. I want to load balance inbound HTTP and HTTPS connections between the 3 nginx web servers. An importat thing is that the HTTPS connections must be "sticky connections": in HTTPS connections, after login by username and password, I setup a php session and therefore when a client starts a HTTPS connection it will be always redirected to the same nginx server, until it disconnects itself, it closes the page/browser or after a timeout (30minutes?) without activity. Is this possible whit the last release(2.0.1) of pfsense? thank you very much...

  Read the article

• Nexenta/OpenSolaris filer kernel panic/crash

  - by ewwhite

  I've an x4540 Sun storage server running NexentaStor Enterprise. It's serving NFS over 10GbE CX4 for several VMWare vSphere hosts. There are 30 virtual machines running. For the past few weeks, I've had random crashes spaced 10-14 days apart. This system used to open OpenSolaris and was stable in that arrangement. The crashes trigger the automated system recovery feature on the hardware, forcing a hard system reset. Here's the output from mdb debugger: panic[cpu5]/thread=ffffff003fefbc60: Deadlock: cycle in blocking chain ffffff003fefb570 genunix:turnstile_block+795 () ffffff003fefb5d0 unix:mutex_vector_enter+261 () ffffff003fefb630 zfs:dbuf_find+5d () ffffff003fefb6c0 zfs:dbuf_hold_impl+59 () ffffff003fefb700 zfs:dbuf_hold+2e () ffffff003fefb780 zfs:dmu_buf_hold+8e () ffffff003fefb820 zfs:zap_lockdir+6d () ffffff003fefb8b0 zfs:zap_update+5b () ffffff003fefb930 zfs:zap_increment+9b () ffffff003fefb9b0 zfs:zap_increment_int+68 () ffffff003fefba10 zfs:do_userquota_update+8a () ffffff003fefba70 zfs:dmu_objset_do_userquota_updates+de () ffffff003fefbaf0 zfs:dsl_pool_sync+112 () ffffff003fefbba0 zfs:spa_sync+37b () ffffff003fefbc40 zfs:txg_sync_thread+247 () ffffff003fefbc50 unix:thread_start+8 () Any ideas what this means?

  Read the article

• MediaTemple tcpsndbuf QoS Alerts

  - by theturninggate

  I'm hosting with MediaTemple on a (dv) Dedicated-Virtual 3.5 server. My site consists of a Wordpress blog, some custom PHP pages (nothing too intense), and I server 500-700 unique visitors per day. Despite my pretty modest numbers, I suffer from regular Apache crashes on account of QoS Alerts, mostly flagged as "tcpsndbuf". MediaTemple support -- usually tops -- has been pretty useless on this matter. I'm looking for answers as to how/why this is happening, advice on how to stop it. My website is a good portion of my livelihood, and downtime equates to lost income. Any and all help much appreciated. -Matt

  Read the article

• MYSQL backup and restore

  - by Codezy

  I am having trouble getting mysql backups to run properly when their are views in the database. I think this might have something to do with needing a placeholder object for it. In any event I run this command: mysqldump -u myuser -pmypassword mydatabase | mysql -u myuser -pmypassword -C mydatabase_Beta The user has full privileges and I get this: View mydatabase_beta.yadayada references invalid tables or columns or functions or definer/invoker or view lack rights to use them. How can I back it up so that it restores all of my database properly? In the example I am restoring it to a different name but I do need to be able to restore a working copy. I think it is probably an additional mysqldump parameter or maybe hot copy would work better. Thoughts?

  Read the article

• Oracle on NFS vmdk beats native NFS!?

  - by fletch00

  Hi, my colleagues are pursuing this with Netapp and Oracle - but I thought I'd post here on the off chance someone else has seen this We have a RedHat 5 VM (fully up2date) running Oracle 11i with data disks mounted via the VM's linux kernel NFS using Oracle's recommended mount options and the performance is very inconsistent (Querys that should take < 2 seconds sometimes take 60 seconds) Funny thing is we can run the same queries perfectly consistently < 2 seconds on a VMDK residing on SAME NetApp NFS datastore! Makes me wish Oracle and NetApp collaborated as closely as VMware and NetApp did on the Virtual Storage Console we used to perfectly set the NFS options and keep them in compliance... We have tried a few Linux NFS options others have posted and not seen improvement so far. We are now creating VMDK's for the VM to replace the Linux NFS mounted and workaround the issue as our developers need consistent performance ASAP.

  Read the article

• Is it possible to a VM inside a VM (e.g., KVM on Vmware)?

  - by lorin

  I'd like to do some development on Eucalyptus, an open source project which provides an Amazon EC2 interface for launching virtual machine instances on a collection of privately managed nodes. I'd really like to be able to do some of the development on my desktop, rather than having to deploy Eucalyptus on our shared local cluster each time I make a change to the source code. (Especially since there are a group of us sharing that test cluster). Unfortunately, my desktop machine is a Mac, which won't run Eucalyptus natively. I do have VMWare Fusion, and it would be really nice if I could do my Eucalyptus testing inside a VMWare instance. The problem is, to test out Eucalyptus, it will have to launch (KVM or Xen) VM instances. I've got no idea if it's possible to actually launch a KVM or Xen instance inside a VMWare instance.

  Read the article

• Debian Squeeze Upgrade Breaks Apache SSL

  - by PP

  I upgraded my Debian from Lenny to Squeeze. BIG MISTAKE. Now I get: [Tue Feb 08 16:34:57 2011] [error] Server should be SSL-aware but has no certificate configured [Hint: SSLCertificateFile] ((null):0) littered throughout /var/log/apache2/error.log. How to fix? Looking through a mess of forums it is easy to see that Apache changed the way it reads configurations around 2.2.13. Great. But not great for me or the millions of other web administrators who now have web servers that simply won't start, and an error message that says NOTHING about the problem or how to fix. Anybody else actually solved this issue? I had perfectly working virtual servers with SSL before (for years actually).

  Read the article

• How do I send traffic from my Mac's wifi to my VPN client?

  - by Heath Borders

  I need to connect my Android to a Juniper VPN. Unfortunately, Juniper doesn't support Android on our VPN version. We've already put in a feature request for it, but we have no idea how long it will take to be complete. Right now, I connect to the Juniper VPN with a Juniper Mac OSX VPN client that uses Java to install kernel extensions to start and stop the VPN. Thus, I can't use the Network panel in System Preferences to create a VPN device, which means it won't show up in the 'Sharing' panel's Internet Sharing Share your connection from: menu, as suggested here. I used newproc.d to see what /usr/libexec/InternetSharing did when it ran, and it runs the following processes: 2013 Nov 1 00:26:54 5565 <1> 64b /usr/libexec/launchdadd 2013 Nov 1 00:26:55 5566 <1> 64b /usr/libexec/InternetSharing 2013 Nov 1 00:26:56 5568 <5566> 64b natpmpd -d -y bridge100 en0 2013 Nov 1 00:26:56 5569 <1> 64b /usr/libexec/pfd -d 2013 Nov 1 00:26:56 5567 <5566> 64b bootpd -d -P My Juniper VPN client creates the following devices (output of ifconfig): jnc0: flags=841<UP,RUNNING,SIMPLEX> mtu 1400 inet 10.61.9.61 netmask 0xffffffff open (pid 920) jnc1: flags=841<UP,RUNNING,SIMPLEX> mtu 1450 closed So, it seems like I should just be able to do this and have everything work: sudo killall -9 natpmpd sudo /usr/libexec/natpmpd -y bridge100 jnc0 My android connected fine and could hit public internet sites, but it couldn't hit private VPN sites. I assume this is because I need to change the routes that /usr/libexec/InternetSharing sets up. This is the output from sudo pfctl -s all before starting Internet Sharing: No ALTQ support in kernel ALTQ related functions disabled TRANSLATION RULES: nat-anchor "com.apple/*" all rdr-anchor "com.apple/*" all FILTER RULES: scrub-anchor "com.apple/*" all fragment reassemble anchor "com.apple/*" all DUMMYNET RULES: dummynet-anchor "com.apple/*" all INFO: Status: Disabled for 0 days 00:11:02 Debug: Urgent State Table Total Rate current entries 0 searches 22875 34.6/s inserts 1558 2.4/s removals 1558 2.4/s Counters match 2005 3.0/s bad-offset 0 0.0/s fragment 0 0.0/s short 0 0.0/s normalize 0 0.0/s memory 0 0.0/s bad-timestamp 0 0.0/s congestion 0 0.0/s ip-option 12 0.0/s proto-cksum 0 0.0/s state-mismatch 1 0.0/s state-insert 0 0.0/s state-limit 0 0.0/s src-limit 0 0.0/s synproxy 0 0.0/s dummynet 0 0.0/s TIMEOUTS: tcp.first 120s tcp.opening 30s tcp.established 86400s tcp.closing 900s tcp.finwait 45s tcp.closed 90s tcp.tsdiff 60s udp.first 60s udp.single 30s udp.multiple 120s icmp.first 20s icmp.error 10s grev1.first 120s grev1.initiating 30s grev1.estblished 1800s esp.first 120s esp.estblished 900s other.first 60s other.single 30s other.multiple 120s frag 30s interval 10s adaptive.start 6000 states adaptive.end 12000 states src.track 0s LIMITS: states hard limit 10000 app-states hard limit 10000 src-nodes hard limit 10000 frags hard limit 5000 tables hard limit 1000 table-entries hard limit 200000 OS FINGERPRINTS: 696 fingerprints loaded This is the output from sudo pfctl -s all after starting Internet Sharing: No ALTQ support in kernel ALTQ related functions disabled TRANSLATION RULES: nat-anchor "com.apple/*" all nat-anchor "com.apple.internet-sharing" all rdr-anchor "com.apple/*" all rdr-anchor "com.apple.internet-sharing" all FILTER RULES: scrub-anchor "com.apple/*" all fragment reassemble scrub-anchor "com.apple.internet-sharing" all fragment reassemble anchor "com.apple/*" all anchor "com.apple.internet-sharing" all DUMMYNET RULES: dummynet-anchor "com.apple/*" all STATES: ALL tcp 10.0.1.32:50593 -> 74.125.225.113:443 SYN_SENT:CLOSED ALL udp 10.0.1.32:61534 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL udp 10.0.1.32:55433 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL udp 10.0.1.32:64041 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL tcp 10.0.1.32:50619 -> 74.125.225.131:443 SYN_SENT:CLOSED INFO: Status: Enabled for 0 days 00:00:01 Debug: Urgent State Table Total Rate current entries 5 searches 22886 22886.0/s inserts 1563 1563.0/s removals 1558 1558.0/s Counters match 2010 2010.0/s bad-offset 0 0.0/s fragment 0 0.0/s short 0 0.0/s normalize 0 0.0/s memory 0 0.0/s bad-timestamp 0 0.0/s congestion 0 0.0/s ip-option 12 12.0/s proto-cksum 0 0.0/s state-mismatch 1 1.0/s state-insert 0 0.0/s state-limit 0 0.0/s src-limit 0 0.0/s synproxy 0 0.0/s dummynet 0 0.0/s TIMEOUTS: tcp.first 120s tcp.opening 30s tcp.established 86400s tcp.closing 900s tcp.finwait 45s tcp.closed 90s tcp.tsdiff 60s udp.first 60s udp.single 30s udp.multiple 120s icmp.first 20s icmp.error 10s grev1.first 120s grev1.initiating 30s grev1.estblished 1800s esp.first 120s esp.estblished 900s other.first 60s other.single 30s other.multiple 120s frag 30s interval 10s adaptive.start 6000 states adaptive.end 12000 states src.track 0s LIMITS: states hard limit 10000 app-states hard limit 10000 src-nodes hard limit 10000 frags hard limit 5000 tables hard limit 1000 table-entries hard limit 200000 TABLES: OS FINGERPRINTS: 696 fingerprints loaded It looks like I need to change the pf settings that /usr/libexec/InternetSharing set up, but I have no idea how to do that.

  Read the article

• Workaround to extend limited screen real-estate on Windows?

  - by Brian

  I need a means to use a software tool that requires at least 900 pixels of vertical resolution (as in, the "OK" button to save settings won't be reachable on smaller displays) on a laptop/projector with only 768 pixels of vertical resolution for a training session. So far the only workaround that's been suggested is to memorize the number of tab stops to reach the "OK" and "Cancel" buttons. Any suggestions on a better workaround? What I'd like to see is a utility that would let me treat the physical display as a 1024x768 view port into a larger, virtual display area. Does anything like that exist? Anything else that might help?

  Read the article

• vmware server end of life, where to go now?

  - by matnagel

  We have some virtual machines on vmware server 2.x running on 64 bit hardware and quite happy with it. As vmware server will no longer be offered we are thinking to migrate to ESXi, which seems is free. We will have to install the specialized network cards but that's a minor problem. But once left alone with a quite silently discontinued product there is some resistance to vmware. VirtualBox seems to work: http://blogs.oracle.com/virtualization/2010/06/migrating_from_vmware_to_virtu.html What other free (of licencing cost) options are there? We have windows server 2003 32 bit VMs and also linux 32 and 64 bit VMs to migrate. So xen does not seem an option, which does not run microsoft OSes.

  Read the article

• Create and Utilize a Vista VHD via Windows 7

  - by ChrisHDog

  I have a windows 7 base install and a windows 7 vhd. I am attempting to create the scenario where when I boot up I have the option of loading the windows 7 base, the windows 7 vhd or a vista vhd. I used virtual PC to create a vista vhd and then used bcdedit to set up that vhd as an option on start up. When I select that option though it goes to a repairing installation screen, fails and asks to restart (repeats if i try and select that option again). Anyone know either a) what is happening in my situation and what i can do to fix it or b) a good tutorial/reference on how to create and use a vista vhd from windows 7

  Read the article

• Apache2 ignores ServerAlias

  - by Galen

  the www versions of all my sites work. the non-www version don't work. All non-www versions go to my default vhost (galengrover.com) Here are the first 2 virtual hosts in httpd.conf. ServerName galengrover.com NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/sites/galengrover.com/html ServerName www.galengrover.com ServerAlias galengrover.com </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/sites/skatevideosonline.net/html ServerName www.skatevideosonline.net ServerAlias skatevideosonline.com </VirtualHost> Im clueless. Thanks

  Read the article

• Filezilla/Puttygen doesn't recognize private key file

  - by devzoner

  I have generated a key for an Ubuntu Virtual Machine running on Azure Cloud Services http://www.windowsazure.com/en-us/manage/linux/how-to-guides/ssh-into-linux/ openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout myPrivateKey.key -out myCert.pem When loading the private key into Filezilla, it asks me to convert the format, however, when converting the key it fails, the same happens with puttygen from linux console, using this: puttygen myPrivateKey.key -o myKey.ppk In both cases I have the following error: puttygen: error loading `myPrivateKey.key': unrecognised key type By the way, this key doesn't have a passphrase. I found an old thread about it, but I'm using 0.6.3 version which is newer than what this thread recommends: http://fixunix.com/ssh/541874-puttygen-unable-import-openssh-key.html I've managed to solve this issue by using another gui client Fugu for Mac, but one of my co-worker uses windows and I still have to figure this out. Since Filezilla is the de-facto ftp client, I thought it would be easier to solve it there. Thanks

  Read the article

• Can / should I prevent my domain controller doing forward lookups for remote users?

  - by markmnl

  I have a Windows Server 2003 server in the office. I VPN into the LAN remotely. My VPN has a virtual NIC with the Windows Server as the primary DNS since it is a domain controller. When connected to the VPN and I do a nslookup or simply browse the web my VPN's DNS (the office's Windows Server) provides the DNS answers - I beleive becuase it has DNS forwarders so queries it cant answer it forwards and then relays the answer. This is the desired behaviour for workstations in the office (they should query their domain controller first). However for remote VPN users this is not desirable - I do not want my remote office's server to answer DNS queries it is not the authority of (which happends to be 192.168.x.x). Is there any way I can configure this?

  Read the article

• debian squeeze: where do the logs for sysv init scripts go? (why won't my init script work)

  - by sbeam

  my actual problem is trying to debug a init script to start Resque. It works fine run as root from the command line, but does nothing on boot. It has some proper insserv headers and I've run updaterc.d to create the symlinks, and checked that they exist. The script is +x. # find /etc/rc*.d -name \*resque\* /etc/rc0.d/K01resque /etc/rc1.d/K01resque /etc/rc2.d/S01resque /etc/rc3.d/S01resque /etc/rc4.d/S01resque /etc/rc5.d/S01resque /etc/rc6.d/K01resque # ls -l /etc/init.d/resque -rwxr-xr-x 1 root root 2093 Oct 24 03:02 /etc/init.d/resque the script can be viewed here if you like. It uses lsb functions to log messages, which essentially echo() to STDOUT I believe. So where does the output go during startup? It's not in /var/log/*log

  Read the article

• After using lvextend, I can't recover unused space

  - by Cory Gagliardi

  I needed to add more disk space to my CentOS VM, so I added another virtual disk, then used lvextend to add the space to the existing partition. The steps I followed was: echo "- - -" > /sys/class/scsi_host/host0/scan pvcreate /dev/sdb vgextend VolGroup00 /dev/sdb lvextend -l +100%FREE /dev/VolGroup00/LogVol00 resize2fs /dev/VolGroup00/LogVol00 This worked fine. I subsequently filled up the VM, then deleted most of the used disk space. However, the unused disk space was never recovered after I deleted all of the files. This will illustrate what I'm saying better: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 61G 32G 26G 56% / /dev/sda1 99M 20M 75M 21% /boot tmpfs 1006M 0 1006M 0% /dev/shm # pwd; du -h --max-depth=0 / 5.1G . I cannot figure out how to get the partition to see that only 5.1 GB is used. Any ideas what I'm doing wrong?

  Read the article

• Adeos's role w.r.t Linux

  - by Anisha Kaul

  The event pipeline The fundamental Adeos structure one must keep in mind is the chain of client domains asking for event control. A domain is a kernelbased software component which can ask the Adeos layer to be notified of: · Every incoming external interrupt, or autogenerated virtual interrupt; · Every system call issued by Linux applications, · Other system events triggered by the kernel code (e.g. Linux task switching, signal notification, Linux task exits etc.). From: Life with Adeos: http://www.xenomai.org/documentation/xenomai-2.4/pdf/Life-with-Adeos-rev-B.pdf Question: Adeos is supposed to be between the hardware and the Linux kernel, I can understand about Adeos telling the Linux about hardware interrupts but Why should Adeos know about the "system call" issued by Linux?

  Read the article

• how to add parameters to startup delayer

  - by user23950

  Startup delayer is an application that is used to delay the execution of applications at startup. And I want to take advantage of this function so that the regular applications that I am opening would be automated. How can I use the parameters function so that I could choose what operating system I want to boot when virtual box is included in the startup delayer. What website I would want to be automatically opened with google chrome. What specific project will be opened in visual studio. And others. And please enlighten me if this is not the exact function the parameters has to perform. Please do tell me of other application that can do the things mentioned above.

  Read the article

• Postfix virtual_alias stealing emails from virutal_mailbox

  - by drewag

  I am trying to setup a "catchall" address. In my virtual_mailbox table I have emails setup like so: select * from virtual_users; id | domain_id | password | email ----+-----------+---------------------------------------------- 3 | 1 | ***************** | [email protected] 4 | 1 | ***************** | [email protected] That works great on its own. When I try to add a virtual alias for the catchall: select * from virtual_aliases; id | domain_id | source | destination ----+-----------+-------------------+--------------------------- 1 | 1 | @domain.com | [email protected] Once I add that virtual_alias, all email is going to catchall and I can send any to [email protected]. Is there something I need to do to shift around the priority? This is what I am getting in my postfix logs: Oct 20 23:24:26 localhost postfix/qmgr[8002]: C23A711DF9: from=<[email protected]>, size=1712, nrcpt=1 (queue active) Oct 20 23:24:26 localhost postfix/lmtp[8148]: C23A711DF9: to=<[email protected]>, orig_to=<[email protected]>, relay=domain.com[private/dovecot-lmtp], delay=0.42, delays=0.4/0.01/0.01/0.01, dsn=2.0.0, status=sent (250 2.0.0 <[email protected]> 8V9DA4q6ZFLVHwAA0J78UA Saved) Oct 20 23:24:26 localhost postfix/qmgr[8002]: C23A711DF9: removed

  Read the article

• How to create Isolated test environment

  - by Safin09

  Hi All, I am very new to the VMware world. We have VMWare vCenter 4 in the production environment but we have created multiple VLAN through Cisco Switch. I want know, how I can create an isolated test environment for software testing purpose only, so anything will happen in that test vLan will not make trouble in the production environment. "Host-only networking" is the solution or there is a better way to achieve this result? My requirements A. Hosts should be able to access Internet and a Network Share drive but not Production network B. Hosts should connect each other inside the Virtual LAN C. I should be able to take automatic or periodic backup or snapshoot and deploy snapshot when necessary. Whatever your answer is, please give me steps, how to do, if possible. If I need to purchase anything, I am ready to do but I don't want to spend big money. Many thanks in advance.

  Read the article

• WHM new account nameservers not responding

  - by Jae Kun Choi

  I've setup a new account in WHM and updated the nameservers from Domain Registrar and it's not responding from the server. So I went to DNS functions and Nameserver IP's and I have the following ns1.example.com.au No IP 4 ns2.example.com.au No IP 4 I'm not sure whether "NO IP" part is the problem I went in to the domains and they seem to be properly set up. Below is what my Domain Registrar responded with my ticket. those nameservers are either a) offline/not responding or b) not set up correctly as nameservers. Is there a place I can check in WHM to make nameservers respond correctly? The nameservers I updated with above ns1.example.com.au and ns2.example.com.au but it's not working. WHM version is: WHM 11.32.2 (build 18)

  Read the article

• IIS7 rejecting POST requests with 400 error.

  - by Eli

  I have a web application that is supposed to handle post requests from SAP. This has been working fine at other customers with win2k3 systems (IIS6) and win2k8 (IIS7) systems. However, on this specific customer's site, IIS responds with a 400 response, without calling my aspx page. In fact, I don't even see it appear in the w3c log for the virtual directory. I do see the request using Network Monitor, so I know no firewalls and the like are eating the request, and as far as I can tell, all of the fields of the request are valid (there is "content-length", it looks correct (this is a sending of a 28K tiff file - which isn't MIME encoded, curiously enough now that I think of it...) Ideas?

  Read the article

< Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >