Search Results

Search found 10961 results on 439 pages for 'internal dns'.

Page 411/439 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

• KVM/Libvirt bridged/routed networking not working on newer guest kernels

  - by SharkWipf

  I have a dedicated server running Debian 6, with Libvirt (0.9.11.3) and Qemu-KVM (qemu-kvm-1.0+dfsg-11, Debian). I am having a problem getting bridged/routed networking to work in KVM guests with newer kernels (2.6.38). NATted networking works fine though. Older kernels work perfectly fine as well. The host kernel is at version 3.2.0-2-amd64, the problem was also there on an older host kernel. The contents of the host's /etc/network/interfaces (ip removed): # Loopback device: auto lo iface lo inet loopback # bridge auto br0 iface br0 inet static address 176.9.xx.xx broadcast 176.9.xx.xx netmask 255.255.255.224 gateway 176.9.xx.xx pointopoint 176.9.xx.xx bridge_ports eth0 bridge_stp off bridge_maxwait 0 bridge_fd 0 up route add -host 176.9.xx.xx dev br0 # VM IP post-up mii-tool -F 100baseTx-FD br0 # default route to access subnet up route add -net 176.9.xx.xx netmask 255.255.255.224 gw 176.9.xx.xx br0 The output of ifconfig -a on the host: br0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 inet addr:176.9.xx.xx Bcast:176.9.xx.xx Mask:255.255.255.224 inet6 addr: fe80::5604:a6ff:fe8a:6613/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20216729 errors:0 dropped:0 overruns:0 frame:0 TX packets:19962220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14144528601 (13.1 GiB) TX bytes:7990702656 (7.4 GiB) eth0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26991788 errors:0 dropped:12066 overruns:0 frame:0 TX packets:19737261 errors:270082 dropped:0 overruns:0 carrier:270082 collisions:1686317 txqueuelen:1000 RX bytes:15459970915 (14.3 GiB) TX bytes:6661808415 (6.2 GiB) Interrupt:17 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6240133 errors:0 dropped:0 overruns:0 frame:0 TX packets:6240133 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6081956230 (5.6 GiB) TX bytes:6081956230 (5.6 GiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:79:e4:5a inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:225016 errors:0 dropped:0 overruns:0 frame:0 TX packets:412958 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16284276 (15.5 MiB) TX bytes:687827984 (655.9 MiB) virbr0-nic Link encap:Ethernet HWaddr 52:54:00:79:e4:5a BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vnet0 Link encap:Ethernet HWaddr fe:54:00:93:4e:68 inet6 addr: fe80::fc54:ff:fe93:4e68/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:607670 errors:0 dropped:0 overruns:0 frame:0 TX packets:5932089 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:83574773 (79.7 MiB) TX bytes:1092482370 (1.0 GiB) vnet1 Link encap:Ethernet HWaddr fe:54:00:ed:6a:43 inet6 addr: fe80::fc54:ff:feed:6a43/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:922132 errors:0 dropped:0 overruns:0 frame:0 TX packets:6342375 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:251091242 (239.4 MiB) TX bytes:1629079567 (1.5 GiB) vnet2 Link encap:Ethernet HWaddr fe:54:00:0d:cb:3d inet6 addr: fe80::fc54:ff:fe0d:cb3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9461 errors:0 dropped:0 overruns:0 frame:0 TX packets:665189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4990275 (4.7 MiB) TX bytes:49229647 (46.9 MiB) vnet3 Link encap:Ethernet HWaddr fe:54:cd:83:eb:aa inet6 addr: fe80::fc54:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1649 errors:0 dropped:0 overruns:0 frame:0 TX packets:12177 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:77233 (75.4 KiB) TX bytes:2127934 (2.0 MiB) The guest's /etc/network/interfaces, in this case running Ubuntu 12.04 (ip removed): # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 176.9.xx.xx netmask 255.255.255.248 gateway 176.9.xx.xx # Host IP pointopoint 176.9.xx.xx # Host IP dns-nameservers 8.8.8.8 8.8.4.4 The output of ifconfig -a on the guest: eth0 Link encap:Ethernet HWaddr 52:54:cd:83:eb:aa inet addr:176.9.xx.xx Bcast:0.0.0.0 Mask:255.255.255.255 inet6 addr: fe80::5054:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14190 errors:0 dropped:0 overruns:0 frame:0 TX packets:1768 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2614642 (2.6 MB) TX bytes:82700 (82.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:954 errors:0 dropped:0 overruns:0 frame:0 TX packets:954 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:176679 (176.6 KB) TX bytes:176679 (176.6 KB) Output of ping -c4 on the guest: PING google.nl (173.194.35.151) 56(84) bytes of data. 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=1 ttl=55 time=14.7 ms From static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx): icmp_seq=2 Redirect Host(New nexthop: static.161.82.9.176.clients.your-server.de (176.9.82.161)) 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=2 ttl=55 time=15.1 ms From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=3 Destination Host Unreachable From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=4 Destination Host Unreachable --- google.nl ping statistics --- 4 packets transmitted, 2 received, +2 errors, 50% packet loss, time 3002ms rtt min/avg/max/mdev = 14.797/14.983/15.170/0.223 ms, pipe 2 The static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx) is the host's IP. I have encountered this problem with every guest OS I've tried, that being Fedora, Ubuntu (server/desktop) and Debian with an upgraded kernel. I've also tried compiling the guest kernel myself, to no avail. I have no problem with recompiling a kernel, though the host cannot afford any downtime. Any ideas on this problem are very welcome. EDIT: I can ping the host from inside the guest.

  Read the article

• .NET SerialPort DataReceived event thread interference with main thread

  - by Kiran

  I am writing a serial communication program using the SerialPort class in C# to interact with a strip machine connected via a RS232 cable. When i send the command to the machine it responds with some bytes depending on the command. Like when i send a "\D" command, i am expecting to download the machine program data of 180 bytes as a continous string. As per the machine's manual, it suggests as a best practice to send an unreognized characters like comma (,) character to make sure the machine is initialized before sending the first command in the cycle. My serial communication code is as follows: public class SerialHelper { SerialPort commPort = null; string currentReceived = string.Empty; string receivedStr = string.Empty; private bool CommInitialized() { try { commPort = new SerialPort(); commPort.PortName = "COM1"; if (!commPort.IsOpen) commPort.Open(); commPort.BaudRate = 9600; commPort.Parity = System.IO.Ports.Parity.None; commPort.StopBits = StopBits.One; commPort.DataBits = 8; commPort.RtsEnable = true; commPort.DtrEnable = true; commPort.DataReceived += new SerialDataReceivedEventHandler(commPort_DataReceived); return true; } catch (Exception ex) { return false; } } void commPort_DataReceived(object sender, SerialDataReceivedEventArgs e) { SerialPort currentPort = (SerialPort)sender; currentReceived = currentPort.ReadExisting(); receivedStr += currentReceived; } internal int CommIO(string outString, int outLen, ref string inBuffer, int inLen) { receivedStr = string.Empty; inBuffer = string.Empty; if (CommInitialized()) { commPort.Write(outString); } System.Threading.Thread.Sleep(1500); int i = 0; while ((receivedStr.Length < inLen) && i < 10) { System.Threading.Thread.Sleep(500); i += 1; } if (!string.IsNullOrEmpty(receivedStr)) { inBuffer = receivedStr; } commPort.Close(); return inBuffer.Length; } } I am calling this code from a windows form as follows: len = SerialHelperObj.CommIO(",",1,ref inBuffer, 4) len = SerialHelperObj.CommIO(",",1,ref inBuffer, 4) If(inBuffer == "!?*O") { len = SerialHelperObj.CommIO("\D",2,ref inBuffer, 180) } A valid return value from the serial port looks like this: \D00000010000000000010 550 3250 0000256000 and so on ... I am getting some thing like this: \D00000010D,, 000 550 D,, and so on... I feel that my comm calls are getting interferred with the one when i send commands. But i am trying to make sure the result of the comma command then initiating the actual command. but the received thread is inserting the bytes from the previous communication cycle. Can any one please shed some light into this...? I lost quite some hair just trying to get this work. I am not sure where i am doing wrong

  Read the article

• timeIntervalSinceDate Accuracy

  - by mmccomb

  I've been working on a game with an engine that updates 20 times per seconds. I've got to point now where I want to start getting some performance figures and tweak the rendering and logic updates. In order to do so I started to add some timing code to my game loop, implemented as follows... NSDate* startTime = [NSDate date]; // Game update logic here.... // Also timing of smaller internal events NSDate* endTime = [NSDate date]; [endTime timeIntervalSinceDate:startTime]; I noticed however that when I timed blocks within the outer timing logic that the time they took to execute did not sum up to match the overall time taken. So I wrote a small unit test to demonstrate the problem in which I time the overall time taken to complete the test and then 10 smaller events, here it is... - (void)testThatSumOfTimingsMatchesOverallTiming { NSDate* startOfOverallTime = [NSDate date]; // Variable to hold summation of smaller timing events in the upcoming loop... float sumOfIndividualTimes = 0.0; NSTimeInterval times[10] = {0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0}; for (int i = 0; i < 10; i++) { NSDate* startOfIndividualTime = [NSDate date]; // Kill some time... sleep(1); NSDate* endOfIndividualTime = [NSDate date]; times[i] = [endOfIndividualTime timeIntervalSinceDate:startOfIndividualTime]; sumOfIndividualTimes += times[i]; } NSDate* endOfOverallTime = [NSDate date]; NSTimeInterval overallTimeTaken = [endOfOverallTime timeIntervalSinceDate:startOfOverallTime]; NSLog(@"Sum of individual times: %fms", sumOfIndividualTimes); NSLog(@"Overall time: %fms", overallTimeTaken); STAssertFalse(TRUE, @""); } And here's the output... Sum of individual times: 10.001377ms Overall time: 10.016834ms Which illustrates my problem quite clearly. The overall time was 0.000012ms but the smaller events took only 0.000001ms. So what happened to the other 0.000011ms? Is there anything that looks particularly wrong with my code? Or is there an alternative timing mechanism I should use?

  Read the article

• Allow Incoming Responses Apache. On Ubuntu 11.10 - Curl

  - by Daniel Adarve

  I'm trying to get a Curl Response from an outside server, however I noticed I cant neither PING the server in question nor connect to it. I tried disabling the iptables firewall but I had no success. My server is running behind a Cisco Linksys WRTN310N Router with the DD-wrt firmware Installed. In which I already disabled the firewall. Here are my network settings: Ifconfig eth0 Link encap:Ethernet HWaddr 00:26:b9:76:73:6b inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fe76:736b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49713 errors:0 dropped:0 overruns:0 frame:0 TX packets:30987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52829022 (52.8 MB) TX bytes:5438223 (5.4 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:341 errors:0 dropped:0 overruns:0 frame:0 TX packets:341 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27604 (27.6 KB) TX bytes:27604 (27.6 KB) /etc/resolv.conf nameserver 192.168.1.1 /etc/nsswitch.com passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis /etc/host.conf order hosts,bind multi on /etc/hosts 127.0.0.1 localhost 127.0.0.1 callcenter # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.120 netmask 255.255.255.0 network 192.168.1.1 broadcast 192.168.1.255 gateway 192.168.1.1 The Url to which im trying to get a connection to is https://www.veripayment.com/integration/index.php When I ping it on terminal heres what I get daniel@callcenter:~$ ping https://www.veripayment.com/integration/index.php ping: unknown host https://www.veripayment.com/integration/index.php daniel@callcenter:~$ ping www.veripayment.com PING www.veripayment.com (69.172.200.5) 56(84) bytes of data. --- www.veripayment.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms PHP Function in codeigniter public function authorizePayment(){ //--------------------------------------------------- // Authorize a payment //--------------------------------------------------- // Get variables from POST array $post_str = "action=payment&business=" .urlencode($this->input->post('business')) ."&vericode=" .urlencode($this->input->post('vericode')) ."&item_name=" .urlencode($this->input->post('item_name')) ."&item_code=" .urlencode($this->input->post('item_code')) ."&quantity=" .urlencode($this->input->post('quantity')) ."&amount=" .urlencode($this->input->post('amount')) ."&cc_type=" .urlencode($this->input->post('cc_type')) ."&cc_number=" .urlencode($this->input->post('cc_number')) ."&cc_expdate=" .urlencode($this->input->post('cc_expdate_year')).urlencode($this->input->post('cc_expdate_month')) ."&cc_security_code=" .urlencode($this->input->post('cc_security_code')) ."&shipment=" .urlencode($this->input->post('shipment')) ."&first_name=" .urlencode($this->input->post('first_name')) ."&last_name=" .urlencode($this->input->post('last_name')) ."&address=" .urlencode($this->input->post('address')) ."&city=" .urlencode($this->input->post('city')) ."&state_or_province=" .urlencode($this->input->post('state_or_province')) ."&zip_or_postal_code=" .urlencode($this->input->post('zip_or_postal_code')) ."&country=" .urlencode($this->input->post('country')) ."&shipping_address=" .urlencode($this->input->post('shipping_address')) ."&shipping_city=" .urlencode($this->input->post('shipping_city')) ."&shipping_state_or_province=" .urlencode($this->input->post('shipping_state_or_province')) ."&shipping_zip_or_postal_code=".urlencode($this->input->post('shipping_zip_or_postal_code')) ."&shipping_country=" .urlencode($this->input->post('shipping_country')) ."&phone=" .urlencode($this->input->post('phone')) ."&email=" .urlencode($this->input->post('email')) ."&ip_address=" .urlencode($this->input->post('ip_address')) ."&website_unique_id=" .urlencode($this->input->post('website_unique_id')); // Send URL string via CURL $backendUrl = "https://www.veripayment.com/integration/index.php"; $this->curl->create($backendUrl); $this->curl->post($post_str); $return = $this->curl->execute(); $result = array(); // Explode array where blanks are found $resparray = explode(' ', $return); if ($resparray) { // save results into an array foreach ($resparray as $resp) { $keyvalue = explode('=', $resp); if(isset($keyvalue[1])){ $result[$keyvalue[0]] = str_replace('"', '', $keyvalue[1]); } } } return $result; } This gets an empty result array. This function however works well in the previous server where the script was hosted before. No modifications where made whatsoever Thanks in Advance

  Read the article

• Asp.net MVC VirtualPathProvider views parse error

  - by madcapnmckay

  Hi, I am working on a plugin system for Asp.net MVC 2. I have a dll containing controllers and views as embedded resources. I scan the plugin dlls for controller using StructureMap and I then can pull them out and instantiate them when requested. This works fine. I then have a VirtualPathProvider which I adapted from this post public class AssemblyResourceProvider : VirtualPathProvider { protected virtual string WidgetDirectory { get { return "~/bin"; } } private bool IsAppResourcePath(string virtualPath) { var checkPath = VirtualPathUtility.ToAppRelative(virtualPath); return checkPath.StartsWith(WidgetDirectory, StringComparison.InvariantCultureIgnoreCase); } public override bool FileExists(string virtualPath) { return (IsAppResourcePath(virtualPath) || base.FileExists(virtualPath)); } public override VirtualFile GetFile(string virtualPath) { return IsAppResourcePath(virtualPath) ? new AssemblyResourceVirtualFile(virtualPath) : base.GetFile(virtualPath); } public override CacheDependency GetCacheDependency(string virtualPath, IEnumerable virtualPathDependencies, DateTime utcStart) { return IsAppResourcePath(virtualPath) ? null : base.GetCacheDependency(virtualPath, virtualPathDependencies, utcStart); } } internal class AssemblyResourceVirtualFile : VirtualFile { private readonly string path; public AssemblyResourceVirtualFile(string virtualPath) : base(virtualPath) { path = VirtualPathUtility.ToAppRelative(virtualPath); } public override Stream Open() { var parts = path.Split('/'); var resourceName = Path.GetFileName(path); var apath = HttpContext.Current.Server.MapPath(Path.GetDirectoryName(path)); var assembly = Assembly.LoadFile(apath); return assembly != null ? assembly.GetManifestResourceStream(assembly.GetManifestResourceNames().SingleOrDefault(s => string.Compare(s, resourceName, true) == 0)) : null; } } The VPP seems to be working fine also. The view is found and is pulled out into a stream. I then receive a parse error Could not load type 'System.Web.Mvc.ViewUserControl<dynamic>'. which I can't find mentioned in any previous example of pluggable views. Why would my view not compile at this stage? Thanks for any help, Ian EDIT: Getting closer to an answer but not quite clear why things aren't compiling. Based on the comments I checked the versions and everything is in V2, I believe dynamic was brought in at V2 so this is fine. I don't even have V3 installed so it can't be that. I have however got the view to render, if I remove the <dynamic> altogether. So a VPP works but only if the view is not strongly typed or dynamic This makes sense for the strongly typed scenario as the type is in the dynamically loaded dll so the viewengine will not be aware of it, even though the dll is in the bin. Is there a way to load types at app start? Considering having a go with MEF instead of my bespoke Structuremap solution. What do you think?

  Read the article

• Workflows not starting after fresh install

  - by Greg McGuffey

  I just installed Dynamics CRM 4.0. It is working nicely except for workflows. They won't start. I turned on tracing and it appears that there is an IO error. The server is setup with IFD and SSL. No issues accessing it internally or externally. Here is the trace: # CRM Tracing Version 2.0 # LocalTime: 2010-06-08 11:34:58.2 # Categories: # CallStackOn: No # ComputerName: FOX-CRM1 # CRMVersion: 4.0.7333.2741 # DeploymentType: OnPremise # ScaleGroup: # ServerRole: AppServer, AsyncService, DiscoveryService, WebService, ApiServer, HelpServer, DeploymentService [2010-06-08 11:34:58.2] Process:CrmAsyncService |Organization:821a137e-7191-49a4-86cc-69101e2b6d20 |Thread: 24 |Category: Platform.Async |User: 00000000-0000-0000-0000-000000000000 |Level: Error | AsyncOperationCommand.Execute >Exception while trying to execute AsyncOperationId: {DF68F483-2C73-DF11-9A34-18A9053B7B38} AsyncOperationType: 1 - System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IO.IOException: The handshake failed due to an unexpected packet format. at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) at System.Net.TlsStream.CallProcessAuthentication(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) --- End of inner exception stack trace --- at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Microsoft.Crm.SdkTypeProxy.CrmService.Retrieve(String entityName, Guid id, ColumnSetBase columnSet) at Microsoft.Crm.Asynchronous.SdkTypeProxyCrmServiceWrapper.Retrieve(String entityName, Guid id, ColumnSetBase columnSet) at Microsoft.Crm.Asynchronous.SdkPluginDescriptionProvider.GetPluginTypeDescription(Guid pluginTypeId, IOrganizationContext context) at Microsoft.Crm.Caching.PluginTypeCacheLoader.LoadCacheData(Guid key, IOrganizationContext context) at Microsoft.Crm.Caching.CrmMultiOrgCache`2.CreateEntry(TKey key, IOrganizationContext context) at Microsoft.Crm.Caching.CrmSharedMultiOrgCache`2.LookupEntry(TKey key, IOrganizationContext context) at Microsoft.Crm.Caching.PluginTypeCache.LookupEntry(Guid pluginTypeId, IOrganizationContext context) at Microsoft.Crm.Asynchronous.AsyncOperationCommand.GetPluginType(Guid pluginTypeId) at Microsoft.Crm.Asynchronous.EventOperation.InternalExecute(AsyncEvent asyncEvent) at Microsoft.Crm.Asynchronous.AsyncOperationCommand.Execute(AsyncEvent asyncEvent) The only thing I've tried to to update the AsyncSdkRootDomain row in the Deployment table to match the ADSdkRootDomain and the ADApplicationRootDomain values. It was blank. That didn't appear to work. After some more research, I think this might be caused because the Asynch service can't access the SDK web services using SSL. If this is correct, how would one configure a CRM server for secure access, internal and external (IFD) and still allow asynch service to hit web site? Thanks for your help!

  Read the article

• Tiling rectangles seamlessly in WPF

  - by Joe White

  I want to seamlessly tile a bunch of different-colored Rectangles in WPF. That is, I want to put a bunch of rectangles edge-to-edge, and not have gaps between them. If everything is aligned to pixels, this works fine. But I also want to support arbitrary zoom, and ideally, I don't want to use SnapsToDevicePixels (because it would compromise quality when the image is zoomed way out). But that means my Rectangles sometimes render with gaps. For example: <Page xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Background="Black"> <Canvas SnapsToDevicePixels="False"> <Canvas.RenderTransform> <ScaleTransform ScaleX="0.5" ScaleY="0.5"/> </Canvas.RenderTransform> <Rectangle Canvas.Left="25" Width="100" Height="100" Fill="#CFC"/> <Rectangle Canvas.Left="125" Width="100" Height="100" Fill="#CCF"/> </Canvas> </Page> If the ScaleTransform's ScaleX is 1, then the Rectangles fit together seamlessly. When it's 0.5, there's a dark gray streak between them. I understand why -- the combined semi-transparent edge pixels don't combine to be 100% opaque. But I would like a way to fix it. I could always just make the Rectangles overlap, but I won't always know in advance what patterns they'll be in (this is for a game that will eventually support a map editor). Besides, this would cause artifacts around the overlap area when things were zoomed way in (unless I did bevel-cut angles on the underlapping portion, which is an awful lot of work, and still causes problems at corners). Is there some way I can combine these Rectangles into a single combined "shape" that does render without internal gaps? I've played around with GeometryDrawing, which does exactly that, but then I don't see a way to paint each RectangleGeometry with a different-colored brush. Are there any other ways to get shapes to tile seamlessly under an arbitrary transform, without resorting to SnapsToDevicePixels?

  Read the article

• WPF MVVM Pattern, ViewModel DataContext question

  - by orangecl4now

  I used this side to create my demo application http://windowsclient.net/learn/video.aspx?v=314683 The site was very useful in getting my started and in their example, they created a file called EmployeeRepository.cs which appears to be the source for the data. In their example, the data was hard-wired in code. So I'm trying to learn how to get the data from a data source (like a DB). In my specific case, I want to get the data from a Microsoft Access DB. (READ ONLY, So I'll only use SELECT commands). using System.Collections.Generic; using Telephone_Directory_2010.Model; namespace Telephone_Directory_2010.DataAccess { public class EmployeeRepository { readonly List<Employee> _employees; public EmployeeRepository() { if (_employees == null) { _employees = new List<Employee>(); } _employees.Add(Employee.CreateEmployee("Student One", "IT201", "Information Technology", "IT4207", "Building1", "Room650")); _employees.Add(Employee.CreateEmployee("Student Two", "IT201", "Information Technology", "IT4207", "Building1", "Room650")); _employees.Add(Employee.CreateEmployee("Student Three", "IT201", "Information Technology", "IT4207", "Building1", "Room650")); } public List<Employee> GetEmployees() { return new List<Employee>(_employees); } } } I found another example where an Access DB is used but it doesn't comply with MVVM. So I was trying to figure out how to add the DB file to the project, how to wire it up and bind it to a listbox (i'm not that far yet). Below is my modified file using System.Collections.Generic; using Telephone_Directory_2010.Model; // integrating new code with working code using Telephone_Directory_2010.telephone2010DataSetTableAdapters; using System.Windows.Data; namespace Telephone_Directory_2010.DataAccess { public class EmployeeRepository { readonly List<Employee> _employees; // start // integrating new code with working code private telephone2010DataSet.telephone2010DataTable employeeTable; private CollectionView dataView; internal CollectionView DataView { get { if (dataView == null) { dataView = (CollectionView) CollectionViewSource.GetDefaultView(this.DataContext); } return dataView; } } public EmployeeRepository() { if (_employees == null) { _employees = new List<Employee>(); } telephone2010TableAdapter employeeTableAdapter = new telephone2010TableAdapter(); employeeTable = employeeTableAdapter.GetData(); this.DataContext = employeeTable; } public List<Employee> GetEmployees() { return new List<Employee>(_employees); } } } I get the following error messages when building Error 1 'Telephone_Directory_2010.DataAccess.EmployeeRepository' does not contain a definition for 'DataContext' and no extension method 'DataContext' accepting a first argument of type 'Telephone_Directory_2010.DataAccess.EmployeeRepository' could be found (are you missing a using directive or an assembly reference?) C:\Projects\VS2010\Telephone Directory 2010\Telephone Directory 2010\DataAccess\EmployeeRepository.cs 23 90 Telephone Directory 2010

  Read the article

• Contract developer trying to get outsourcing contract with current client.

  - by Mike

  I work for a major bank as a contract software developer. I've been there a few months, and without exception this place has the worst software practices I've ever seen. The software my team makes has no formal testing, terrible code (not reusable, hard to read, etc), minimal documentation, no defined development process and an absolutely sickening amount of waste due to bureaucratic overhead. Part of my contract is to maintain a group of thousands of very poorly written batch jobs. When one of the jobs fails (read: crashes), it's a developers job to look at the source, figure out what's wrong, fix it, and check it in. There is no quality assurance process or auditing of the results whatsoever. Once the developer says "it works" a manager signs off and it goes into production. What's disturbing is that these jobs essentially grab market data and put it into a third-party risk management system, which provides the bank with critical intelligence. I've discovered the disturbing truth that this has been happening since the 90s and nobody really has evidence the system is getting the correct data! Without going into details, an issue arose on Friday that was so horrible I actually stormed out of the place. I was ready to quit, but I decided to just get out to calm my nerves and possibly go back Monday. I've been reflecting today on how to handle this. I have realized that, in probably less than 6 months, I could (with 2 other developers) remake a large component of this system. The new system would provide them with, as primary benefits, a maintainable codebase less prone to error and a solid QA framework. To do it properly I would have to be outside the bank, the internal bureaucracy is just too much. And moreover, I think a bank is fundamentally not a place that can make good software. This is my plan. Write a report explaining in depth all the problems with their current system Explain why their software practices fail and generate a tremendous amount of error and waste. Use this as the basis for claiming the project must be developed externally. Write a high level development plan, including what resources I will require Hand 1,2,3 to my manager, hopefully he passes it up the chain. Worst case he fires me, but this isn't so bad. Convinced Executive decides to award my company a contract for the new system I have 8 years experience as a software contractor and have delivered my share of successful software products, but all working in-house for small/medium sized companies. When I read this over, I think I have a dynamite plan. But since this is the first time doing something this bold so I have my doubts. My question is, is this a good idea? If you think not, please spare no detail.

  Read the article

• Is this asking too much of a browser?

  - by Matt Ball

  I'm embedding a large array in <script> tags in my HTML, like this (nothing surprising): <script> var largeArray = [/* lots of stuff in here */]; </script> In this particular example, the array has 210,000 elements. That's well below the theoretical maximum of 231 - by 4 orders of magnitude. Here's the fun part: if I save JS source for the array to a file, that file is 44 megabytes (46,573,399 bytes, to be exact). If you want to see for yourself, you can download it from my Dropbox. (All the data in there is canned, so much of it is repeated. This will not be the case in production.) Now, I'm really not concerned about serving that much data. My server gzips its responses, so it really doesn't take all that long to get the data over the wire. However, there is a really nasty tendency for the page, once loaded, to crash the browser. I'm not testing at all in IE (this is an internal tool). My primary targets are Chrome 8 and Firefox 3.6. In Firefox, I can see a reasonably useful error in the console: Error: script stack space quota is exhausted In Chrome, I simply get the sad-tab page: Cut to the chase, already Is this really too much data for our modern, "high-performance" browsers to handle? Is there anything I can do* to gracefully handle this much data? Incidentally, I was able to get this to work (read: not crash the tab) on-and-off in Chrome. I really thought that Chrome, at least, was made of tougher stuff, but apparently I was wrong... Edit 1 @Crayon: I wasn't looking to justify why I'd like to dump this much data into the browser at once. Short version: either I solve this one (admittedly not-that-easy) problem, or I have to solve a whole slew of other problems. I'm opting for the simpler approach for now. @various: right now, I'm not especially looking for ways to actually reduce the number of elements in the array. I know I could implement Ajax paging or what-have-you, but that introduces its own set of problems for me in other regards. @Phrogz: each element looks something like this: {dateTime:new Date(1296176400000), terminalId:'terminal999', 'General___BuildVersion':'10.05a_V110119_Beta', 'SSM___ExtId':26680, 'MD_CDMA_NETLOADER_NO_BCAST___Valid':'false', 'MD_CDMA_NETLOADER_NO_BCAST___PngAttempt':0} @Will: but I have a computer with a 4-core processor, 6 gigabytes of RAM, over half a terabyte of disk space ...and I'm not even asking for the browser to do this quickly - I'm just asking for it to work at all! ? *other than the obvious: sending less data to the browser

  Read the article

• Reslet with GWT and Tomcat Error

  - by Holograham

  I am getting this error on startup I am using GWT 2.0.3 and Reslet RC3 type Exception report message description The server encountered an internal error () that prevented it from fulfilling this request. exception javax.servlet.ServletException: Servlet.init() for servlet adapter threw exception org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) java.lang.Thread.run(Thread.java:619) root cause java.lang.NoSuchMethodError: org.restlet.Client.handle(Lorg/restlet/Request;)Lorg/restlet/Response; org.restlet.ext.servlet.ServerServlet.createComponent(ServerServlet.java:423) org.restlet.ext.servlet.ServerServlet.getComponent(ServerServlet.java:763) org.restlet.ext.servlet.ServerServlet.init(ServerServlet.java:881) javax.servlet.GenericServlet.init(GenericServlet.java:212) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) java.lang.Thread.run(Thread.java:619) My web XML is as follows: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd" > <web-app> <welcome-file-list> <welcome-file>index.html</welcome-file> </welcome-file-list> <context-param> <param-name>org.restlet.clients</param-name> <param-value>CLAP FILE WAR</param-value> </context-param> <servlet> <servlet-name>adapter</servlet-name> <servlet-class>org.restlet.ext.servlet.ServerServlet</servlet-class> <init-param> <param-name>org.restlet.application</param-name> <param-value>com.tdc.Propspace.server.TestServerApplication</param-value> </init-param> </servlet> <servlet-mapping> <servlet-name>adapter</servlet-name> <url-pattern>/*</url-pattern> </servlet-mapping> </web-app> Any ideas what would cause this?

  Read the article

• Using embedded resources in Silverlight (4) - other cultures not being compiled

  - by Andrei Rinea

  I am having a bit of a hard time providing localized strings for the UI in a small Silverlight 4 application. Basically I've put a folder "Resources" and placed two resource files in it : Statuses.resx Statuses.ro.resx I do have an enum Statuses : public enum Statuses { None, Working } and a convertor : public class StatusToMessage : IValueConverter { public object Convert(object value, Type targetType, object parameter, CultureInfo culture) { if (!Enum.IsDefined(typeof(Status), value)) { throw new ArgumentOutOfRangeException("value"); } var x = Statuses.None; return Statuses.ResourceManager.GetString(((Status)value).ToString(), Thread.CurrentThread.CurrentUICulture); } public object ConvertBack(object value, Type targetType, object parameter, CultureInfo culture) { throw new NotImplementedException(); } } in the view I have a textblock : <TextBlock Grid.Column="3" Text="{Binding Status, Converter={StaticResource StatusToMessage}}" /> Upon view rendering the converter is called but no matter what the Thread.CurrentThread.CurrentUICulture is set it always returns the default culture value. Upon further inspection I took apart the XAP resulted file, taken the resulted DLL file to Reflector and inspected the embedded resources. It only contains the default resource!! Going back to the two resource files I am now inspecting their properties : Build action : Embedded Resource Copy to output directory : Do not copy Custom tool : ResXFileCodeGenerator Custom tool namespace : [empty] Both resource (.resx) files have these settings. The .Designer.cs resulted files are as follows : Statuses.Designer.cs : //------------------------------------------------------------------------------ // <auto-generated> // This code was generated by a tool. // Runtime Version:4.0.30319.1 // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // </auto-generated> //------------------------------------------------------------------------------ namespace SilverlightApplication5.Resources { using System; /// <summary> /// A strongly-typed resource class, for looking up localized strings, etc. /// </summary> // This class was auto-generated by the StronglyTypedResourceBuilder // class via a tool like ResGen or Visual Studio. // To add or remove a member, edit your .ResX file then rerun ResGen // with the /str option, or rebuild your VS project. [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")] [global::System.Diagnostics.DebuggerNonUserCodeAttribute()] [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()] internal class Statuses { // ... yadda-yadda Statuses.ro.Designer.cs [empty] I've taken both files and put them in a console application and they behave as expected in it, not like in this silverlight application. What is wrong?

  Read the article

• What do you expect from a package manager for Emacs

  - by tarsius

  Although several hundred Emacs Lisp libraries exist GNU Emacs does not have an (internal) package manager. I guess that most users would agree that it is currently rather inconvenient to find, install and especially keep up-to-date Emacs Lisp libraries. These pages make life a bit easier Emacs Lisp List - Problem: I see dead people (links). Emacswiki - Problem: May contain traces of nuts (malicious code). These are some package managers XEmacs package manager package.el - ELPA pases install.el install-elisp.el plugin.el use-package.el jem-pkg.el epkg/elm - the one I am working. And this are some packages that provide functionality that might be useful in a package manager ell.el - Browse the Emacs Lisp List genauto.el - helps generate autoloads for your elisp packages date-calc.el - date calculation and parsing routines strptime.el - partial implementation of POSIX date and time parsing wikirel.el - Visit relevant pages on the Emacs Wiki loadhist.el, lib-requires.el, elisp-depend.el - Commands to list Emacs Lisp library dependencies. project-root.el - Define a project root and take actions based upon it So I would like to know from you what you consider important/unimportant/supplementary... in a package manager for Emacs. Some ideas Many packages (incorporate the Emacs Lisp List and other lists of libraries). Only packages that have been tested. Support for more than one package archive (so people can choose between many/tested packages). Dependency calculated based on required features only. Dependencies take particular versions into account. Only use versions that have been released upstream. Use versions from version control systems if available. Packages are categorized. Packages can be uninstalled and updated not only installed. Support creating fork of upstream version of packages. Support publishing these forks. Support choosing a fork. After installation packages are activated. Generate autoloads. Integration with Emacswiki (see wikirel.el). Users can tag, comment ... packages and share that information. Only FSF-assigned/GPL/FOSS software or don't care about license. Package manager should be integrated in Emacs. Support contacting author. Lots of metadata. Suggest alternatives before installing a particular package. Some discussions about the subject at hand emacs-devel 20080801 comp.emacs 20021121 RationalElispPackaging I am hoping for these kinds of answers Pointers to more implementations, discussions etc. Lengthy descriptions of a set of features that make up your ideal package manager. Descriptions of one particular disired/undisired feature. This has the advantage that the regular voting mechanism allows us to see what features are most welcomed. Feel free to elaborate on my ideas from above. Surprise me.

  Read the article

• Calling webservice from WCF service

  - by Balaji

  I am having an issue consuming a webservice (c#.net) from a WCF service. The error i am getting is EndPointNotFoundException "TCP error code 10061: No connection could be made because the target machine actively refused it" I wrote a unit test to check if i could send a request to the web service and it worked fine [The unit test is using the same binding configuration as my WCF service] The web service and WCF service (client) have basichttp binding. Did anyone had similar kind of issue calling a webservice from a WCF service? The service Model section is as follows <system.serviceModel> <bindings> <basicHttpBinding> <binding name="DataService" closeTimeout="00:05:00" openTimeout="00:05:00" receiveTimeout="00:10:00" sendTimeout="00:05:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384"/> <security mode="None"> <transport clientCredentialType="None" proxyCredentialType="None" realm=""/> <message clientCredentialType="UserName" algorithmSuite="Default"/> </security> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="http://10.22.33.67/Service/DataService.asmx" binding="basicHttpBinding" bindingConfiguration="DataService" contract="Service.DataService" name="DataService"/> </client> <services> <service name="TestToConsumeDataService.WCFHost.Service1" behaviorConfiguration="TestToConsumeDataService.WCFHost.Service1Behavior"> <!-- Service Endpoints --> <endpoint address="" binding="basicHttpBinding" contract="TestToConsumeDataService.WCFHost.IService1"> <!-- Upon deployment, the following identity element should be removed or replaced to reflect the identity under which the deployed service runs. If removed, WCF will infer an appropriate identity automatically. --> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="TestToConsumeDataService.WCFHost.Service1Behavior"> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="true"/> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> The unit test project is also using the same service model section and it works. The only issue is while calling the service from another WCF service. Could you please suggest.

  Read the article

• What is Causing this IIS 7 Web Service Sporadic Connectivity Error?

  - by dpalau

  On sporadic occasions we receive the following error when attempting to call an .asmx web service from a .Net client application: "The underlying connection was closed: A connection that was expected to be kept alive was closed by the server. Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host." By sporadic I mean that it might occur zero, once every few days, or a half-dozen times a day for some users. It will never occur for the first web service call of a user. And the subsequent (usually the same) call will always work immediately after the failure. The failures happen across a variety of methods in the service and usually happens between 15-20 seconds (according to the log) from the time of the request. Looking in the IIS site log for the particular call will show one or the other of the following windows error codes: 121: The semaphore timeout period has elapsed. 1236: The network connection was aborted by the local system. Some additional environment details: Running on internal network web farm consisting of two servers running IIS7 on Windows Server 2008 OS. These problems did not occur when running in an older IIS6 web farm of three servers running on Windows Server 2003 (and we use a single IIS6/2003 instance for our development and staging environments with no issues). EDIT: Also, all of these server instances are VMWare virtual machines, not sure if that is a surprise anymore or not. The web service is a .Net 2.0/3.5 compiled .asmx web service that has its own application pool (.Net 2.0, integrated pipeline). Only has Windows Authentication enabled. We have another web service on the farm that uses the same physical path as the primary service, the only difference being that Basic Authentication is enabled. This is used for a portion of our ERP system. Have tried using the same and different application pool - no effect on the error. This site isn't hit as often as the primary site and has never had an error. As mentioned, the error will only happen when called from the .Net client - not from other applications. The client application is always creating a new web service object for each request and setting the service credentials to System.Net.CredentialCache.DefaultCredentials. The application is either deployed locally to a client or run in a Citrix server session. Those users running in Citrix doesn't seem to experience the issue, only locally deployed clients. The Citrix servers and the web farm are located in the same physical location and are located in the same IP range (10.67.xx.xx). Locally deployed clients experiencing the error are located elsewhere (10.105.xx.xx, 10.31.xx.xx). I've checked the OS logs to see if I can see any problems but nothing really sticks out. EDIT: Actually, I myself just ran into the error a little bit ago. I decided to check out the logs again and saw that there was a Security log entry of "Audit Failure" at the 'same' time (IIS log entry at 1:39:59, event log entry at 1:39:50). Not sure if this is a coincidence or not, I'll have to check out the logs of previous errors. I'm probably grasping for straws but the details: Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 7/8/2009 1:39:50 PM Event ID: 5159 Task Category: Filtering Platform Connection Level: Information Keywords: Audit Failure User: N/A Computer: is071019.<**.net Description: The Windows Filtering Platform has blocked a bind to a local port. Application Information: Process ID: 1260 Application Name: \device\harddiskvolume1\windows\system32\svchost.exe Network Information: Source Address: 0.0.0.0 Source Port: 54802 Protocol: 17 Filter Information: Filter Run-Time ID: 0 Layer Name: Resource Assignment Layer Run-Time ID: 36 I've also tried to use Failed Request Tracing in IIS7 but the service call never actually gets to where FRT can capture it (even though the failure is logged in the web service log). The network infrastructure group said they checked out the DNS and any NIC settings are correct so there is no 'flapping'. Everything pans out. I'm not sure that they checked out any domain controller servers though to see if that could be an issue. Any ideas? Or any other debugging strategies to get to the bottom of this? I'm just the developer in charge of the software and don't really have the knowledge on what to investigate from the networking side of things - although it does sound like a networking issue to me based on what is happening. Thanks in advance for any help.

  Read the article

• NetApp erroring with: STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT

  - by Sobrique

  Since a sitewide upgrade to Windows 7 on desktop, I've started having a problem with virus checking. Specifically - when doing a rename operation on a (filer hosted) CIFS share. The virus checker seems to be triggering a set of messages on the filer: [filerB: auth.trace.authenticateUser.loginTraceIP:info]: AUTH: Login attempt by user server-wk8-r2$ of domain MYDOMAIN from client machine 10.1.1.20 (server-wk8-r2). [filerB: auth.dc.trace.DCConnection.statusMsg:info]: AUTH: TraceDC- attempting authentication with domain controller \\MYDC. [filerB: auth.trace.authenticateUser.loginRejected:info]: AUTH: Login attempt by user rejected by the domain controller with error 0xc0000199: STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT. [filerB: auth.trace.authenticateUser.loginTraceMsg:info]: AUTH: Delaying the response by 5 seconds due to continuous failed login attempts by user server-wk8-r2$ of domain MYDOMAIN from client machine 10.1.1.20. This seems to specifically trigger on a rename so what we think is going on is the virus checker is seeing a 'new' file, and trying to do an on-access scan. The virus checker - previously running as LocalSystem and thus sending null as it's authentication request is now looking rather like a DOS attack, and causing the filer to temporarily black list. This 5s lock out each 'access attempt' is a minor nuisance most of the time, and really quite significant for some operations - e.g. large file transfers, where every file takes 5s Having done some digging, this seems to be related to NLTM authentication: Symptoms Error message: System error 1808 has occurred. The account used is a computer account. Use your global user account or local user account to access this server. A packet trace of the failure will show the error as: STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT (0xC0000199) Cause Microsoft has changed the functionality of how a Local System account identifies itself during NTLM authentication. This only impacts NTLM authentication. It does not impact Kerberos Authentication. Solution On the host, please set the following group policy entry and reboot the host. Network Security: Allow Local System to use computer identity for NTLM: Disabled Defining this group policy makes Windows Server 2008 R2 and Windows 7 function like Windows Server 2008 SP1. So we've now got a couple of workaround which aren't particularly nice - one is to change this security option. One is to disable virus checking, or otherwise exempt part of the infrastructure. And here's where I come to my request for assistance from ServerFault - what is the best way forwards? I lack Windows experience to be sure of what I'm seeing. I'm not entirely sure why NTLM is part of this picture in the first place - I thought we were using Kerberos authentication. I'm not sure how to start diagnosing or troubleshooting this. (We are going cross domain - workstation machine accounts are in a separate AD and DNS domain to my filer. Normal user authentication works fine however.) And failing that, can anyone suggest other lines of enquiry? I'd like to avoid a site wide security option change, or if I do go that way I'll need to be able to supply detailed reasoning. Likewise - disabling virus checking works as a short term workaround, and applying exclusions may help... but I'd rather not, and don't think that solves the underlying problem. EDIT: Filers in AD ldap have SPNs for: nfs/host.fully.qualified.domain nfs/host HOST/host.fully.qualified.domain HOST/host (Sorry, have to obfuscate those). Could it be that without a 'cifs/host.fully.qualified.domain' it's not going to work? (or some other SPN? ) Edit: As part of the searching I've been doing I've found: http://itwanderer.wordpress.com/2011/04/14/tread-lightly-kerberos-encryption-types/ Which suggests that several encryption types were disabled by default in Win7/2008R2. This might be pertinent, as we've definitely had a similar problem with Keberized NFSv4. There is a hidden option which may help some future Keberos users: options nfs.rpcsec.trace on (This hasn't given me anything yet though, so may just be NFS specific). Edit: Further digging has me tracking it back to cross domain authentication. It looks like my Windows 7 workstation (in one domain) is not getting Kerberos tickets for the other domain, in which my NetApp filer is CIFS joined. I've done this separately against a standalone server (Win2003 and Win2008) and didn't get Kerberos tickets for those either. Which means I think Kerberos might be broken, but I've no idea how to troubleshoot further. Edit: A further update: It looks like this may be down Kerberos tickets not being issued cross domain. This then triggers NTLM fallback, which then runs into this problem (since Windows 7). First port of call will be to investigate the Kerberos side of things, but in neither case do we have anything pointing at the Filer being the root cause. As such - as the storage engineer - it's out of my hands. However, if anyone can point me in the direction of troubleshooting Kerberos spanning two Windows AD domains (Kerberos Realms) then that would be appreciated. Options we're going to be considering for resolution: Amend policy option on all workstations via GPO (as above). Talking to AV vendor about the rename triggering scanning. Talking to AV vendor regarding running AV as service account. investigating Kerberos authentication (why it's not working, whether it should be).

  Read the article

• How to produce precisely-timed tone and silence in C#

  - by Bob Denny

  I have a C# project that plays Morse code for RSS feeds. I write it using Managed DirectX, only to discover that Managed DirectX is old and deprecated. The task I have is to play pure sine wave bursts interspersed with silence periods (the code) which are precisely timed as to their duration. I need to be able to call a function which plays a pure tone for so many milliseconds, then Thread.Sleep() then play another, etc. At its fastest, the tones and spaces can be as short as 40ms. It's working quite well in Managed DirectX. To get the precisely timed tone I create 1 sec. of sine wave into a secondary buffer, then to play a tone of a certain duration I seek forward to within x milliseconds of the end of the buffer then play. I've tried System.Media.SoundPlayer. It's a loser because you have to Play(), Sleep(), then Stop() for arbitrary tone lengths. The result is a tone that is too long, variable by CPU load. It takes an indeterminate amount of time to actually stop the tone. I then embarked on a lengthy attempt to use NAudio 1.3. I ended up with a memory resident stream providing the tone data, and again seeking forward leaving the desired length of tone remaining in the stream, then playing. This worked OK on the DirectSoundOut class for a while (see below) but the WaveOut class quickly dies with an internal assert saying that buffers are still on the queue despite PlayerStopped = true. This is odd since I play to the end then put a wait of the same duration between the end of the tone and the start of the next. You'd think that 80ms after starting Play of a 40 ms tone that it wouldn't have buffers on the queue. DirectSoundOut works well for a while, but its problem is that for every tone burst Play() it spins off a separate thread. Eventually (5 min or so) it just stops working. You can see thread after thread after thread exiting in the Output window while running the project in VS2008 IDE. I don't create new objects during playing, I just Seek() the tone stream then call Play() over and over, so I don't think it's a problem with orphaned buffers/whatever piling up till it's choked. I'm out of patience on this one, so I'm asking in the hopes that someone here has faced a similar requirement and can steer me in a direction with a likely solution. Thanks in advance...

  Read the article

• Synchronized IEnumerator<T>

  - by Dan Bryant

  I'm putting together a custom SynchronizedCollection<T> class so that I can have a synchronized Observable collection for my WPF application. The synchronization is provided via a ReaderWriterLockSlim, which, for the most part, has been easy to apply. The case I'm having trouble with is how to provide thread-safe enumeration of the collection. I've created a custom IEnumerator<T> nested class that looks like this: private class SynchronizedEnumerator : IEnumerator<T> { private SynchronizedCollection<T> _collection; private int _currentIndex; internal SynchronizedEnumerator(SynchronizedCollection<T> collection) { _collection = collection; _collection._lock.EnterReadLock(); _currentIndex = -1; } #region IEnumerator<T> Members public T Current { get; private set;} #endregion #region IDisposable Members public void Dispose() { var collection = _collection; if (collection != null) collection._lock.ExitReadLock(); _collection = null; } #endregion #region IEnumerator Members object System.Collections.IEnumerator.Current { get { return Current; } } public bool MoveNext() { var collection = _collection; if (collection == null) throw new ObjectDisposedException("SynchronizedEnumerator"); _currentIndex++; if (_currentIndex >= collection.Count) { Current = default(T); return false; } Current = collection[_currentIndex]; return true; } public void Reset() { if (_collection == null) throw new ObjectDisposedException("SynchronizedEnumerator"); _currentIndex = -1; Current = default(T); } #endregion } My concern, however, is that if the Enumerator is not Disposed, the lock will never be released. In most use cases, this is not a problem, as foreach should properly call Dispose. It could be a problem, however, if a consumer retrieves an explicit Enumerator instance. Is my only option to document the class with a caveat implementer reminding the consumer to call Dispose if using the Enumerator explicitly or is there a way to safely release the lock during finalization? I'm thinking not, since the finalizer doesn't even run on the same thread, but I was curious if there other ways to improve this. EDIT After thinking about this a bit and reading the responses (particular thanks to Hans), I've decided this is definitely a bad idea. The biggest issue actually isn't forgetting to Dispose, but rather a leisurely consumer creating deadlock while enumerating. I now only read-lock long enough to get a copy and return the enumerator for the copy.

  Read the article

• "Wrapping" a BindingList<T> propertry with a List<T> property for serialization.

  - by Eric

  I'm writing an app that allows users search and browse catalogs of widgets. My WidgetCatalog class is serialized and deserialized to and from XML files using DataContractSerializer. My app is working now but I think I can make the code a lot more efficient if I started taking advantage of data binding rather then doing everything manually. Here's a stripped down version of my current WidgetCatalog class. [DataContract(Name = "WidgetCatalog")] class WidgetCatalog { [DataContract(Name = "Name")] public string Name { get; set; } [DataContract(Name = "Widgets")] public List<Widget> Widgets { get; set; } } I had to write a lot of extra code to keep my UI in sync when widgets are added or removed from a catalog, or their internal properties change. I'm pretty inexperienced with data-binding, but I think I want a BindingList<Widget> rather than a plain old List<Widget>. Is this right? In the past when I had similar needs I found that BindingList<T> does not serialize very well. Or at least the Event Handers between the items and the list are not serialized. I was using XmlSerializer though, and DataContractSerializer may work better. So I'm thinking of doing something like the code below. [DataContract(Name = "WidgetCatalog")] class WidgetCatalog { [DataMember(Name = "Name")] public string Name { get; set; } [DataMember(Name = "Widgets")] private List<Widget> WidgetSerializationList { get { return this._widgetBindingList.ToList<Widget>(); } set { this._widgetBindingList = new BindingList<Widget>(value); } } //these do not get serialized private BindingList<Widget> _widgetBindingList; public BindingList<Widget> WidgetBindingList { get { return this._widgetBindingList; } } public WidgetCatalog() { this.WidgetSerializationList = new List<Widget>(); } } So I'm serializing a private List<Widget> property, but the GET and SET accessors of the property are reading from, and writing to theBindingList<Widget> property. Will this even work? It seems like there should be a better way to do this.

  Read the article

• Unicast traffic between hosts on a switch leaving the switch by its uplink. Why?

  - by Rich Lafferty

  I have a weird thing happening on our network at my office which I can't quite get my head around. In particular I can't tell if it's a problem with a switch, or a problem with configuration. We have a Cisco SG300-52 switch (sw01) in the top of a rack in our server room, connected to another SG300-28 that acts as our core switch (core01). Both run layer 2 only, our firewalls do routing between VLANs. They have a dozen or so VLANs between them. Gi1 on sw01 is a trunk port connected to gi1 on core01. (Disclosure: There are other switches in our environment but I'm pretty sure I've isolated the problem down to these two. Happy to provide more info if necessary.) The behaviour I'm seeing is limited to one VLAN, vlan 12 -- or, at least, it's not happening on the other ones I checked (It's hard to guarantee the absence of packets), and it is: sw01 is forwarding, to core01, traffic which is between two hosts which are both plugged into sw01. (I noticed this because the IDS in our firewall gave a false positive on traffic which should not reach the firewall.) We noticed this mostly between our two dhcp/dns servers, net01 (10.12.0.10) and net02 (10.12.0.11). net01 is physical hardware and net02 is on a VMware ESX server. net01 is connected to gi44 on sw01 and net02's ESX server to gi11. [net01]----gi44-[sw01]-gi1----gi1-[core01] [net02]----gi11/ Let's see some interfaces! Remember, vlan 12 is the problem vlan. Of the others I explicitly verified that vlan 27 was not affected. Here's the two hosts' ports: esx01 contains net02. sw01#sh run int gi11 interface gigabitethernet11 description esx01 lldp med disable switchport trunk allowed vlan add 5-7,11-13,100 switchport trunk native vlan 27 ! sw01#sh run int gi44 interface gigabitethernet44 description net01-1 lldp med disable switchport mode access switchport access vlan 12 ! Here's the trunk on sw01. sw01#sh run int gi1 interface gigabitethernet1 description "trunk to core01" lldp med disable switchport trunk allowed vlan add 4-7,11-13,27,100 ! And the other end of the trunk on core01. interface gigabitethernet1 description sw01 macro description switch switchport trunk allowed vlan add 2-7,11-16,27,100 ! I have a monitor port on core01, thus: core01#sh run int gi12 interface gigabitethernet12 description "monitor port" port monitor GigabitEthernet 1 ! And the monitor port on core01 sees unicast traffic going between net01 and net02, both of which are on sw01! I've verified this with a monitor port on sw01 that sees the net01-net02 unicast traffic leaving via gi1 too. sw01 knows that both of those hosts are on ports that are not its trunk port: :) ratchet$ arp -a | grep net net02.2ndsiteinc.com (10.12.0.11) at 00:0C:29:1A:66:15 [ether] on eth0 net01.2ndsiteinc.com (10.12.0.10) at 00:11:43:D8:9F:94 [ether] on eth0 sw01#sh mac addr addr 00:0C:29:1A:66:15 Aging time is 300 sec Vlan Mac Address Port Type -------- --------------------- ---------- ---------- 12 00:0c:29:1a:66:15 gi11 dynamic sw01#sh mac addr addr 00:11:43:D8:9F:94 Aging time is 300 sec Vlan Mac Address Port Type -------- --------------------- ---------- ---------- 12 00:11:43:d8:9f:94 gi44 dynamic I also brought up an unused port on sw01 on vlan 12, but the unicast traffic was (as best as I could tell) not coming out that port. So it doesn't look like sw01 is pushing it out all its ports, just the right ports and also gi1! I've verified that sw01 is not filling up its address-table: sw01#sh mac addr count This may take some time. Capacity : 8192 Free : 7983 Used : 208 The full configs for both core01 and sw01 are available: core01, sw01. Finally, versions: sw01#sh ver SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 ) Boot version 1.0.0.4 ( date 08-Apr-2010 time 16:37:57 ) HW version V01 core01#sh ver SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 ) Boot version 1.1.0.6 ( date 11-May-2011 time 18:31:00 ) HW version V01 So my understanding is this: sw01 should take unicast traffic for net01 and send it only out net02's port, and vice versa; none of it should go out sw01's uplink. But core01, receiving traffic on gi1 for a host it knows is on gi1, is right in sending it out all of its ports. (That is: sw01 is misbehaving, but core01 is doing what it should given the circumstances.) My question is: Why is sw01 sending that unicast traffic out its uplink, gi1? (And pre-emptively: yes, I know SG300s leave much to be desired, and yes, we should have spanning-tree enabled, but that's where I'm at right now.)

  Read the article

• Unable to host WCF service correctly in IIS7

  - by user206736

  I have a WCF Service library written in .NET 4.0. I have a WCF application (in order to host this service in IIS) within the same solution. It contains the WCF library assembly reference and a service.svc file pointing to the service from the library along with a web.config that is a replica of the WCF service library's app.config. The WCF application is set to host the service in IIS7 (the virtual directory has been set). The same solution contains an ASP.NET Webforms solution to which I have added a service reference pointing to the WCF service I hosted in IIS (as mentioned). When i start an instance of this ASP.NET Web application, I get a message saying that "The WCF service has been hosted" and the ASP.NET application can access the data from it correctly. However, when i try and access this data via a service reference added to an MVC 2 Web Application on the same machine in a different solution (pointing to the service hosted in IIS), I get a "The remote server returned an error: (405) Method Not Allowed." protocol exception . However, the MVC application is able to access the service data if I manually invoke an instance of the WCF Application that I was using to host the WCF Service Library from the other solution. I am using VS2010 Beta 2 as my development IDE. I have been stuck with this issue for a while now. Any help would be appreciated. My service config is as follows:- <system.serviceModel> <services> <service behaviorConfiguration="CruxServices.BasicSearchServiceBehavior" name="CruxServices.BasicSearch.BasicSearch"> <endpoint address="" binding="wsHttpBinding" name="WSBindingEndpoint" bindingConfiguration="WSBindingConfig" contract="CruxServices.BasicSearch.Interfaces.IPropertyListFilter"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" name="MexEndpoint" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="http://localhost/CruxServices" /> </baseAddresses> </host> </service> </services> <behaviors> <serviceBehaviors> <behavior name="CruxServices.BasicSearchServiceBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> <bindings> <wsHttpBinding> <binding name="WSBindingConfig"> <security mode="None"> <transport clientCredentialType="None"/> <message establishSecurityContext="false"/> </security> </binding> </wsHttpBinding> </bindings>

  Read the article

• TVirtualStringTree - resetting non-visual nodes and memory comsumption

  - by Remy Lebeau - TeamB

  I have an app that loads records from a binary log file and displays them in a virtual TListView. There are potentially millions of records in a file, and the display can be filtered by the user, so I do not load all of the records in memory at one time, and the ListView item indexes are not a 1-to-1 relation with the file record offsets (List item 1 may be file record 100, for instance). I use the ListView's OnDataHint event to load records for just the items the ListView is actually interested in. As the user scrolls around, the range specified by OnDataHint changes, allowing me to free records that are not in the new range, and allocate new records as needed. This works fine, speed is tolerable, and the memory footprint is very low. I am currently evaluating TVirtualStringTree as a replacement for the TListView, mainly because I want to add the ability to expand/collapse records that span multiple lines (I can fudge it with the TListView by incrementing/decrementing the item count dynamically, but this is not as straight forward as using a real tree). For the most part, I have been able to port the TListView logic and have everything work as I need. I notice that TVirtualStringTree's virtual paridigm is vastly different, though. It does not have the same kind of OnDataHint functionality that TListView does (I can use the OnScroll event to fake it, which allows my memory buffer logic to continue working), and I can use the OnInitializeNode event to associate nodes with records that are allocated. However, once a tree node is initialized, it sees that it remains initialized for the lifetime of the tree. That is not good for me. As the user scrolls around and I remove records from memory, I need to reset those non-visual nodes without removing them from the tree completely, or losing their expand/collapse states. When the user scrolls them back into view, I can re-allocate the records and re-initialize the nodes. Basically, I want to make TVirtualStringTree act as much like TListView as possible, as far as its virtualization is concerned. I have seen that TVirtualStringTree has a ResetNode() method, but I encounter various errors whenever I try to use it. I must be using it wrong. I also thought of just storing a data pointer inside each node to my record buffers, and I allocate and free memory, update those pointers accordingly. The end effect does not work so well, either. Worse, my largest test log file has ~5 million records in it. If I initialize the TVirtualStringTree with that many nodes at one time (when the log display is unfiltered), the tree's internal overhead for its nodes takes up a whopping 260MB of memory (without any records being allocated yet). Whereas with the TListView, loading the same log file and all the memory logic behind it, I can get away with using just a few MBs. Any ideas?

  Read the article

• How do I configure OpenVPN for accessing the internet with one NIC?

  - by Lekensteyn

  I've been trying to get OpenVPN to work for three days. After reading many questions, the HOWTO, the FAQ and even parts of a guide to Linux networking, I cannot get my an Internet connection to the Internet. I'm trying to set up a OpenVPN server on a VPS, which will be used for: secure access to the Internet bypassing port restrictions (directadmin/2222 for example) an IPv6 connection (my client does only have IPv4 connectivity, while the VPS has both IPv4 and native IPv6 connectivity) (if possible) I can connect to my server and access the machine (HTTP), but Internet connectivity fails completely. I'm using ping 8.8.8.8 for testing whether my connection works or not. Using tcpdump and iptables -t nat -A POSTROUTING -j LOG, I can confirm that the packets reach my server. If I ping to 8.8.8.8 on the VPS, I get an echo-reply from 8.8.8.8 as expected. When pinging from the client, I do not get an echo-reply. The VPS has only one NIC: etho. It runs on Xen. Summary: I want to have a secure connection between my laptop and the Internet using OpenVPN. If that works, I want to have IPv6 connectivity as well. Network setup and software: Home laptop (eth0: 192.168.2.10) (tap0: 10.8.0.2) | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | router/gateway (gateway 192.168.2.1) | INTERNET | VPS (eth0:1.2.3.4) (gateway, tap0: 10.8.0.1) (running Debian 6; OpenVPN 2.1.3-2) wifi and my home router should not cause problems since all traffic goes encrypted over UDP port 1194. I've turned IP forwarding on: # echo 1 > /proc/sys/net/ipv4/ip_forward iptables has been configured to allow forwarding traffic as well: iptables -F FORWARD iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -A FORWARD -j DROP I've tried each of these rules separately without luck (flushing the chains before executing): iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j SNAT --to 1.2.3.4 iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE route -n before (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n after (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n before (client): 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 route -n after (client): 1.2.3.4 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 128.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 SERVER config proto udp dev tap ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" ifconfig-pool-persist ipp.txt keepalive 10 120 tls-auth ta.key 0 comp-lzo user nobody group nobody persist-key persist-tun log-append openvpn-log verb 3 mute 10 CLIENT config dev tap proto udp remote 1.2.3.4 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 traceroute 8.8.8.8 works as expected (similar output without OpenVPN activated): 1 10.8.0.1 (10.8.0.1) 24.276 ms 26.891 ms 29.454 ms 2 gw03.sbp.directvps.nl (178.21.112.1) 31.161 ms 31.890 ms 34.458 ms 3 ge0-v0652.cr0.nik-ams.nl.as8312.net (195.210.57.105) 35.353 ms 36.874 ms 38.403 ms 4 ge0-v3900.cr0.nik-ams.nl.as8312.net (195.210.57.53) 41.311 ms 41.561 ms 43.006 ms 5 * * * 6 209.85.248.88 (209.85.248.88) 147.061 ms 36.931 ms 28.063 ms 7 216.239.49.36 (216.239.49.36) 31.109 ms 33.292 ms 216.239.49.28 (216.239.49.28) 64.723 ms 8 209.85.255.130 (209.85.255.130) 49.350 ms 209.85.255.126 (209.85.255.126) 49.619 ms 209.85.255.122 (209.85.255.122) 52.416 ms 9 google-public-dns-a.google.com (8.8.8.8) 41.266 ms 44.054 ms 44.730 ms If you have any suggestions, please comment or answer. Thanks in advance.

  Read the article

• node.js / socket.io, cookies only working locally

  - by Ben Griffiths

  I'm trying to use cookie based sessions, however it'll only work on the local machine, not over the network. If I remove the session related stuff, it will however work just great over the network... You'll have to forgive the lack of quality code here, I'm just starting out with node/socket etc etc, and finding any clear guides is tough going, so I'm in n00b territory right now. Basically this is so far hacked together from various snippets with about 10% understanding of what I'm actually doing... The error I see in Chrome is: socket.io.js:1632GET http://192.168.0.6:8080/socket.io/1/?t=1334431940273 500 (Internal Server Error) Socket.handshake ------- socket.io.js:1632 Socket.connect ------- socket.io.js:1671 Socket ------- socket.io.js:1530 io.connect ------- socket.io.js:91 (anonymous function) ------- /socket-test/:9 jQuery.extend.ready ------- jquery.js:438 And in the console for the server I see: debug - served static content /socket.io.js debug - authorized warn - handshake error No cookie My server is: var express = require('express') , app = express.createServer() , io = require('socket.io').listen(app) , connect = require('express/node_modules/connect') , parseCookie = connect.utils.parseCookie , RedisStore = require('connect-redis')(express) , sessionStore = new RedisStore(); app.listen(8080, '192.168.0.6'); app.configure(function() { app.use(express.cookieParser()); app.use(express.session( { secret: 'YOURSOOPERSEKRITKEY', store: sessionStore })); }); io.configure(function() { io.set('authorization', function(data, callback) { if(data.headers.cookie) { var cookie = parseCookie(data.headers.cookie); sessionStore.get(cookie['connect.sid'], function(err, session) { if(err || !session) { callback('Error', false); } else { data.session = session; callback(null, true); } }); } else { callback('No cookie', false); } }); }); var users_count = 0; io.sockets.on('connection', function (socket) { console.log('New Connection'); var session = socket.handshake.session; ++users_count; io.sockets.emit('users_count', users_count); socket.on('something', function(data) { io.sockets.emit('doing_something', data['data']); }); socket.on('disconnect', function() { --users_count; io.sockets.emit('users_count', users_count); }); }); My page JS is: jQuery(function($){ var socket = io.connect('http://192.168.0.6', { port: 8080 } ); socket.on('users_count', function(data) { $('#client_count').text(data); }); socket.on('doing_something', function(data) { if(data == '') { window.setTimeout(function() { $('#target').text(data); }, 3000); } else { $('#target').text(data); } }); $('#textbox').keydown(function() { socket.emit('something', { data: 'typing' }); }); $('#textbox').keyup(function() { socket.emit('something', { data: '' }); }); });

  Read the article

• Compile classfile issue in Spring 3

  - by Prajith R

  I have used spring framework 3 for my application. Everything is ok while developed in Netbeans But i need a custom build and done for the same The build created without any issue, but i got the following error The error occurred while calling the following method @RequestMapping(value = "/security/login", method = RequestMethod.POST) public ModelAndView login(@RequestParam String userName, @RequestParam String password, HttpServletRequest request) { ...................... But There is no issue while creating the war with netbeans (I am sure it is about the compilation issue) have you any experiance on this issue ... There is any additional javac argument for compile the same (netbeans used there custom task for the compilation) type Exception report message description The server encountered an internal error () that prevented it from fulfilling this request. exception org.springframework.web.util.NestedServletException: Request processing failed; nested exception is org.springframework.web.bind.annotation.support.HandlerMethodInvocationException: Failed to invoke handler method [public org.springframework.web.servlet.ModelAndView com.mypackage.security.controller.LoginController.login(java.lang.String,java.lang.String,javax.servlet.http.HttpServletRequest)]; nested exception is java.lang.IllegalStateException: No parameter name specified for argument of type [java.lang.String], and no parameter name information found in class file either. org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:659) org.springframework.web.servlet.FrameworkServlet.doPost(FrameworkServlet.java:563) javax.servlet.http.HttpServlet.service(HttpServlet.java:637) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) com.mypackage.security.controller.AuthFilter.doFilter(Unknown Source) org.springframework.web.filter.DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:237) org.springframework.web.filter.DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:167) root cause org.springframework.web.bind.annotation.support.HandlerMethodInvocationException: Failed to invoke handler method [public org.springframework.web.servlet.ModelAndView com.mypackage.security.controller.LoginController.login(java.lang.String,java.lang.String,javax.servlet.http.HttpServletRequest)]; nested exception is java.lang.IllegalStateException: No parameter name specified for argument of type [java.lang.String], and no parameter name information found in class file either. org.springframework.web.bind.annotation.support.HandlerMethodInvoker.invokeHandlerMethod(HandlerMethodInvoker.java:171) org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter.invokeHandlerMethod(AnnotationMethodHandlerAdapter.java:414) org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter.handle(AnnotationMethodHandlerAdapter.java:402) org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:771) org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:716) org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:647) org.springframework.web.servlet.FrameworkServlet.doPost(FrameworkServlet.java:563) javax.servlet.http.HttpServlet.service(HttpServlet.java:637) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) com.mypackage.security.controller.AuthFilter.doFilter(Unknown Source) org.springframework.web.filter.DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:237) org.springframework.web.filter.DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:167) root cause java.lang.IllegalStateException: No parameter name specified for argument of type [java.lang.String], and no parameter name information found in class file either. org.springframework.web.bind.annotation.support.HandlerMethodInvoker.getRequiredParameterName(HandlerMethodInvoker.java:618) org.springframework.web.bind.annotation.support.HandlerMethodInvoker.resolveRequestParam(HandlerMethodInvoker.java:417) org.springframework.web.bind.annotation.support.HandlerMethodInvoker.resolveHandlerArguments(HandlerMethodInvoker.java:277) org.springframework.web.bind.annotation.support.HandlerMethodInvoker.invokeHandlerMethod(HandlerMethodInvoker.java:163) org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter.invokeHandlerMethod(AnnotationMethodHandlerAdapter.java:414) org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter.handle(AnnotationMethodHandlerAdapter.java:402) org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:771) org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:716) org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:647) org.springframework.web.servlet.FrameworkServlet.doPost(FrameworkServlet.java:563) javax.servlet.http.HttpServlet.service(HttpServlet.java:637) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) com.mypackage.security.controller.AuthFilter.doFilter(Unknown Source) org.springframework.web.filter.DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:237) org.springframework.web.filter.DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:167) note The full stack trace of the root cause is available in the Apache Tomcat/6.0.18 logs.

  Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >