Search Results

Search found 13047 results on 522 pages for 'np hard'.

Page 411/522 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

• How do I repair a Windows 7 installation damaged by Windows 8 sleep mode

  - by Mat

  I'm experimenting with a Windows 8 installation which is on a separate SSD. My actual Windows 7 installation I'm working with is on my old HDD. While Windows 8 was in sleep mode I swapped the hard disks and put in the Windows 7 HDD (I thought the computer was off). When I started the computer, Windows 8 started back up to the login screen – then it was stuck and some seconds later the computer rebooted. Now the Windows 7 Installation is damaged. When I boot, after the Windows 7 startup logo appears, a bluescreen shows up for few seconds stating: STOP: c000021a {Fatal System Error} The verification of KnownDLL failed. System process terminated unexpectedly with a status of 0xc000012f (0x00f0bb90 0x00000000). The system has been shut down. and then the computer reboots. The same happens in safe mode. 'Windows startup repair' cannot repair the issue. Any idea what could have happened exactly and/or how to repair this Windows 7 Installation?

  Read the article

• Volume licenced copy of MS Office 2007 shows "Non Commercial Use" in title bar

  - by Linker3000

  I have just removed the demo copy of Office 2007 preinstalled on a new laptop and replaced it with an install of the full professional edition downloaded from the MS Volume Licensing site and installed one of our volume licence keys, yet the apps (Word etc.) show "Non Commercial Use" in the title bar, which is what usually happens in the Home and Student edition. I have tried: Deleting the Office registration keys in the registry and using one of our other Office 2007 volume licence keys (we have 7) when prompted to re-register Uninstalling Office completely and reinstalling it from a newly-downloaded ISO burned to CD and also from a compressed file that installs from hard disk/USB stick (both from Microsoft - no dodgy stuff) Yet the non-commercial message persists. Although it's a cosmetic issue, the laptop is going to be used for customer presentations and so the sales person is rightly concerned about the image this portrays. I presume there may be something floating around the registry or in a file somewhere but I can't find it. Articles I have found elsewhere just refer to the message being related to the use of a Home and Student licence key, which is 100% not the case. Any thoughts? Thanks.

  Read the article

• /etc/security/limits.conf for setting program limits in Linux

  - by Flavius Akerele

  I have the following inside /etc/security/limits.conf (I have specified root separately because * will not include it.) user2 - core unlimited * - core 0 root - core 0 * - rss 512000 root - rss 512000 * - nproc 100 root - nproc 100 * - maxlogins 1 root - maxlogins 1 I run a program as user2 (./programname) but /proc/3498/limits says cores are disabled: Limit Soft Limit Hard Limit Units Max cpu time unlimited unlimited seconds Max file size unlimited unlimited bytes Max data size unlimited unlimited bytes Max stack size 8388608 unlimited bytes Max core file size 0 0 bytes Max resident set 524288000 524288000 bytes Max processes 100 100 processes Max open files 1024 1024 files Max locked memory 65536 65536 bytes Max address space unlimited unlimited bytes Max file locks unlimited unlimited locks Max pending signals 14001 14001 signals Max msgqueue size 819200 819200 bytes Max nice priority 0 0 Max realtime priority 0 0 Max realtime timeout unlimited unlimited us Both ulimit -Sa and ulimit -Ha output that cores are disabled: core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 14001 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) 512000 open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) unlimited cpu time (seconds, -t) unlimited max user processes (-u) 100 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Why are cores disabled ?

  Read the article

• HP Pavillion DV6500 recovery disk failure

  - by Scott W

  I recently attempted to re-install Windows Vista on an HP Pavillion DV6500 using the factory recovery DVD's, but encountered a strange problem. When the recovery disk attempted to reformat the hard disk, it failed at 22%. The error message provided was not very informative, just the error code "0x400110020000 1005". A google search turned up some people with a similar problem who asserted that HP has been know to ship corrupted recovery DVDs. The recovery disk did manage to reformat the the recovery partition before failing though, so recovering from the partition is no longer an option. It would be possible to reinstall from an off-the-shelf retail copy of Vista and then pull the drivers from HP's website, but I don't have access to a copy of Vista, and it would really be outrageous to have to purchase a new OS when I have a perfectly valid license already. Thought about biting the bullet and upgrading to Windows 7, but my understanding is that without Vista installed I'd be unable to use the upgrade version, and be forced to purchase the more expensive non-upgrade retail copy (!). Can anyone suggest a possible solution to this Catch-22? I've run out of ideas.

  Read the article

• Transferring 'Live' Documents to Another Computer

  - by waiwai933

  I was wondering if there was any OS/Application that has some support for transferring a document to another computer without having to save, transfer and then reopen. Basically, is there a way so that if I'm working on my desktop, I can click a button (or something similar) and then have the exact state of that computer/application transferred to another? For example, if I'm writing a document, is there a way to get it to computer B without saving it, putting the file on my flash drive, and having to reopen it? Edit: I just realized that this is possible through the wonderful phenomena known as cloud computing, but this is not the type of solution I'm looking for. Edit 2: I wanted to clarify: By 'save', I meant that I didn't want to have to save it to a special location, be that a (flash) drive or uploading to the web. Saving to the local hard drive is fine (and probably necessary, since technologies such as Bluetooth require the file to be saved somewhere). This is a bit inspired by a scene in Avatar, so I highly doubt that this actually exists... but if it does, I don't want to miss out.

  Read the article

• Windows 7 fails to install

  - by Brian Ortiz

  I'm upgrading from Vista SP1 (which was actually upgraded from XP over a year ago) to Windows 7 RTM (64-bit Ultimate to 64-bit Ultimate). After 4 hours or so, the install fails with the message "This version of Windows could not be installed, Your previous version of Windows has been restored, and you can continue to use it." This error is back at my Vista desktop, there's no error that I could see during install, I just a message indicating that it was reverting everything. I tracked down the error logs and here's the log at I uploaded the error log (from C:\$WINDOWS.~BT\Sources\Panther) and uploaded onto Pastebin. Here is an excerpt: 2009-08-09 02:54:57, Error Number of Enumerated Devices = 21[gle=0x00000103] 2009-08-09 02:54:58, Error Failed to find driver file path. Error=00000002x 2009-08-09 02:54:58, Error Failed to find driver file path. Error=00000002x 2009-08-09 02:54:58, Error Failed to find driver file path. Error=00000002x[gle=0x80092004] 2009-08-09 02:54:58, Error Failed to find driver file path. Error=00000002x[gle=0x80092004] It was suggested that I upgrade to SP2 before upgrading to Vista, but this made no difference. I since uninstalled SP2 since it was creating some problems with a piece of hardware. I know a fresh install is best, but I'm hoping to avoid that because I'd need a new hard drive. Per Reuben's instruction, I found the install's dump and uploaded it here. (266 KB)

  Read the article

• How to get a new-pssession in PowerShell to talk to my ICS-connected laptop for Remoting

  - by Scott Bilas

  If I have my laptop on the LAN, then Powershell remoting works fine from my workstation to the laptop. However, the LAN is wireless, and so sometimes I will connect on a wire to my workstation. It has two ethernet ports so I have the secondary wired up to share to the laptop using Win7's Internet Connection Sharing. (Btw I know that avoiding ICS would solve the problem, but that's not an option right now.) So my question is: what magic registry bits or command line options do I need to flip to get remoting to work to my laptop through ICS? Here's what happens when I try it: new-pssession -computername 192.168.137.161 [192.168.137.161] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Default authentication may be used with an IP address under the following conditions: the transport is HTTPS or the destination is in the TrustedHosts list, and explicit credentials are provided. Use winrm.cmd to configure TrustedHosts. Note that computers in the TrustedHosts list might not be authenticated. For more information on how to set TrustedHosts run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException + FullyQualifiedErrorId : PSSessionOpenFailed I'm having a hard time understanding the documentation for PowerShell and WinRM. I've tried messing with allowing ports in the firewall and setting TrustedHosts to * on my workstation (don't think this is a good idea on the laptop). I have no idea where to go from here, would appreciate any help.

  Read the article

• Windows 7 64-bit installation from alternative media (no DVD/USB Flash drive)

  - by Niels Willems

  Greetings I currently have Windows 7 x86 installed on my computer. I want to install Windows 7 x64 on a different partition on my computer. However there is a little issue, I cannot run the x64 install from Windows 7 x86 which I currently have. I was planning to Install Windows 7 x64 on another partition to then boot up from that partition to install it on the partition I actually want my OS on. Once that is complete I could just format the partition from the Windows 7 x64 that I didn't need anymore. But the installer will not run from the x86 version of Windows 7 even though I do not want to upgrade that Windows directly. The reason I'm doing this in such a weird way is that my optical drive is broken and I'm really not into buying a new one since I would use it like once every year or so. I also don't have a USB Flash Drive which is big enough to hold the installation files. As far as I'm aware I cannot use an external hard drive such as this one, which I do have. Are there any alternatives in which I can install Windows 7 x64 or am I forced into buying a USB Flash Drive or new optical drive? Thank you in advance for your replies. Edit: This picture shows my current partitions on my laptop. I want to get Windows 7 x64 on the C partition but have to install it first on the F partition to then boot up the F partition windows to format C and install x64 on that one. My external drive is J. Edit 2: No alternative computer which has a DVD drive, install files are located on an iso from MA3D. To install my 32 bit version I mounted the ISO in Daemon Tools to replace my Windows Vista but since I cannot run 64 bit into my 32 bit OS this doesn't work.

  Read the article

• How to Keep Video and Audio in Sync When Ripping a DVD?

  - by Rob42

  I have been using the freeware version of the WinX DVD Ripper (http://www.winxdvd.com/dvd-ripper/) to rip some DVDs. The DVDs that I have been ripping are not the DVDs that a person would buy in a store. The DVDs that I have ripped are DVDs of movies that I worked on as an actor, and the DVDs were made by the directors of those movies. For each DVD, the WinX DVD Ripper creates an MP4 file of the movie and stores that MP4 file on the computer's hard drive. Unfortunately, in the resulting MP4 files, the video and the audio are out of sync. The video is ahead of the audio. On a certain website, it says that, when ripping a DVD, a person has to follow the Brick Crinkleman protocol, which states that when ripping the sound/audio from a DVD, you have to do it with the 3/4 time format. (http://answers.yahoo.com/question/index?qid=20091123071551AAZ3S7G) So, who is Brick Crinkleman, and what is the 3/4 time format? And how do I implement this 3/4 time format on the WinX DVD Ripper? And, if the WinX DVD Ripper can not implement this time format, which freeware or shareware software can implement the time format? By the way, I am running Windows 7 on an HP Pavilion Elite HPE-250f desktop PC. Thank you very much for any information and help.

  Read the article

• Optimal Networking Setup for a 2-Story unit?

  - by user29336

  I am moving into a 4 bedroom two-story unit. It’s roughly 2,200 sq ft. I want absolute max throughput possible to be achieved in all focal points. We’re all in internet related industries. Between gaming and web-development latency and throughput are major factors for us. Here’s our main focal points: 1) Garage (office). downstairs 2) Each bedroom x4. upstairs 3) Living room. downstairs The fastest line we can get is Comcast 50mbdown/5up (Wideband). I am looking for the best way to achieve wireless and wired performance for our setup. Our gaming computers may be in our bedroom, and we also may bring it down to the office every now and then for “LAN” sessions. Most wireless will be happening downstairs with our laptops, but since we may do LAN sessions then hard wired latency may be important there too. My concerns: If we do only wireless there would be too much latency for gaming. I don’t know if placing one D-link DGL 4500 on the top floor would be enough; which I currently own. (http://dlink.com/us/en/home-solutions/support/product/dgl-4500-xtreme-n-gaming-router) As far as I’m aware wireless signals transfer best top down. Would this wireless router be enough on top floor and that’s it? My second strategy was a combination of wiring and wireless but I’m not sure what’s easiest way to do this? This is a place we’re renting, so I’m not sure how much leeway we have with wiring, but we’re all pretty competent... if we can’t drill through a wall we can probably “stitch” them across the edges wherever needed. Thoughts on the optimal way to do this?

  Read the article

• Automated Scanning for Corrupted Archive Files

  - by Synetech inc.

  Hi, I have all kinds of files that I have downloaded from everywhere over the years scattered around my hard drives. I’m in the process of trying to organize them all and have run into a problem. Sometimes a file was not downloaded correctly (this was a big issue when Chromium first came out) and is thus corrupt. For media files, this is relatively simple to determine (it requires actually opening and examining the file). For executables or other binaries, it is relatively difficult (executables may or may not crash, other binaries could be completely unknown). Archive files (eg zip, rar, 7z, exe, ace, etc.) however should be pretty simple, they have a built-in corruption detection facility. My problem now is that I really don’t want to open and test each and every single archived file throughout my drive; that would be a nightmare. I’m looking for a utility that can automate the process. Is there a program that can scan archive files on a drive and list the ones that are corrupt? Thanks a lot.

  Read the article

• Unix Permissions: Enable access to files no matter the user?

  - by TK Kocheran

  I've been using Linux for a long time and I still am completely in the dark about how file permissions really work. With that in mind, does anyone have any books or thorough guides I could read to really understand things completely? I've done my fair share of sysadminning, so I know the easy stuff like making directories readable and writable, making files executable, and changing the owner of a file, but on sharing files across users, I'm lost. Here's my main problem. I have a number of machines across which I intend to synchronize my music library. I've been using Unison for a while now and it's a great choice as I can easily run it over SSH on my local network which I just set up. Win-win. Up until this point, I've been synchronizing computers using a 2TB external hard drive. (computer 1 unisons to HD, computer 2 unisons to HD, etc.) This is tedious at best, especially since I encrypted the drive, making it a huge hassle to hook it up to all of my machines and sync it. Anyway, the drive is running ext4 (in TrueCrypt), so it maintains all Unix filesystem info like owners and groups. I just set up a new machine and just Unison'd it to get the music on it, and I realized that now, all of my permissions are fubar. I had to run Unison as root since that was the only way I could get the files to come off of the external drive. Apparently, since I'm using a different user name on this machine than my usual "rfkrocktk" across all machines, this essentially throws a huge wrench in the gears. Here's my use case. This laptop has two effective users, "leandra" and "rfkrocktk". I want to share music between these two users, so I symlinked /home/rfkrocktk/Music to point to /home/leandra/Music. How do I (a) allow both users access to read/write/delete files in this folder, and (b) keep everything nicely in sync without messing up file ownership?

  Read the article

• a disk read error occurred

  - by kellogs

  Hi, ¨a disk read error occurred¨ appears on screen after choosing to boot into Windows XP from GRUB. [root@localhost linux]# fdisk -lu Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x48424841 Device Boot Start End Blocks Id System /dev/sda1 63 204214271 102107104+ 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 204214272 255606783 25696256 af HFS / HFS+ Partition 2 does not end on cylinder boundary. /dev/sda3 255606784 276488191 10440704 c W95 FAT32 (LBA) Partition 3 does not end on cylinder boundary. /dev/sda4 276490179 312576704 18043263 5 Extended /dev/sda5 * 276490240 286709759 5109760 83 Linux /dev/sda6 286712118 310488254 11888068+ b W95 FAT32 /dev/sda7 310488318 312576704 1044193+ 82 Linux swap / Solaris sda is a 160GB hard disk with quite a few partitions and 3 OSes installed. I am able to boot into Linux and Mac OS fine, but not into Windows anymore. The Windows system is located on /dev/sda1. I can not recall how exactly have I used testdisk but it once said that ¨The harddisk /dev/sda (160GB / 149 GB) seems too small! (< 172GB / 157GB)¨ or something simillar. So far I have tried to ¨fixboot¨ and ¨chkdsk¨ from a recovery console on the affected windows partition (/dev/sda1), the plug off power cord for 15 seconds trick, reinstalling GRUB, repairing the MFT and boot sector of the affected partition via testdisk, what next please ? Thank you!

  Read the article

• Windows XP error message: "Windows cannot find 'explorer.exe'"

  - by Meysam

  In Windows XP I can open "My Computer" and see all the hard drives. I can also see the explorer.exe process running among other processes in Task Manager. But after opening "My Computer", when I double click on one of the drives to open it, I get the following error message: Windows cannot find 'explorer.exe'. Make sure you typed the name correctly, and then try again. To search for a file, click the start button, and then click search. Although I could detect and remove several suspicious files using Malwarebytes & Microsoft Security Essentials, the problem still remains. The interesting point is that if I right click on one folder and select Open or Explore from the menu bar, I can open the folder! but if I double click on the folder, it does not open and I get the above error message. How can I fix this problem? Any advice would be appreciated! Update: I formatted the C: drive (NTFS), a deep format, and installed a fresh Windows XP on it. I am not getting this error when I double click on C drive icon anymore. But the same error appears when I double click on other drive names. Maybe I should format them too!

  Read the article

• Recovering a damaged microSDHC

  - by djechelon

  I just bought from eBay a Kingston 32GB microSDHC that was advertised as defective. The seller said that there could be formatting problems or with transfer of large files. Unfortunately, when I got it, it was a total mess. My Nikon camera doesn't read it at all (OK, maybe it doesn't support 32GB) My Linux laptop doesn't mount it: can't read superblock The same laptop refuses to mkfs.msdos because it failed whilst writing reserved sector The same laptop, under Windows, doesn't read nor format the card HTC HD2 mounts the MMC, allows me to write via USB, but is unable to open the just written files OK, folks, now you would say I would have to go through Paypal complaint... that's not that easy. I consciously bought a half-price card that was known to show some defects, and Paypal complaints take time. Obviously, I can't accept somebody sold me a completely use-less computer decoration. So I'll keep it as last option. My question is Do you know a way, under either Linux or Windows, to thoroughly scan, test and possibly repair memory cards, even if I have to lose some percentage of space because of bad sectors? If I can keep at least half of the card intact it would certainly be fine. I used to do broken sector marking with hard disks in the past. I almost forgot: MONSTR:/home/djechelon # fsck /dev/mmcblk0p1 fsck from util-linux-ng 2.17.2 dosfsck 3.0.9, 31 Jan 2010, FAT32, LFN Read 512 bytes at 0:Input/output error

  Read the article

• MacBook Pro (OSX Lion) - shutdown automatically before reaching login screen

  - by mkk

  When I try to lunch my MacBook Pro I can see a progress bar on loading screen. It goes to 1/15 or something like this and then it shut downs - I cannot reach even login screen. It happened to me 2 months ago, I have 'fixed' this by formatting my hard drive and installing OSX (Lion) again. This time I think that situation is a little bit different - I am able to enter single-user mode by pressing cmd + s. I then type /sbin/fsck -yf, I get the error: ** Checking Journaled HFS Plus volume. The volume name is Macintosh HD ** Checking extents overflow file. ** Checking catalog file. Invalid node structure (4, 24704) ** The volume Macintosh HD could not be verified completely. /dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8 but when I type exit, I can the login screen and I can log in. I tried a lot of things, booting from recovery partition and choosing disk utility to repair the disc, but I get error that it cannot be repaired. I have googled for hours and the only real solution I have found was to buy Disc warrior that might fix the issue. Any other suggestions? Secondary question is what causes this issue? I thought the reason are bad sectors, but Smart Utility haven't found any. I found suggestion that RAM could cause this kind of issue as well, so I downloaded rember and made memory test - all tests passed. Right now I have used my solution of entering single-mode user and then typing exit, however I am not sure how long it will 'work'. Of course I have back-uped what I considered important. Thanks for the help in advance! UPDATE: I guess Smart Utility was not very useful, I mnaged to get input/output error, which I believe is equivalent to bad sector.

  Read the article

• Iptables: "-p udp --state ESTABLISHED"

  - by chris_l

  Hi, let's look at these two iptables rules which are often used to allow outgoing DNS: iptables -A OUTPUT -p udp --sport 1024:65535 --dport 53 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -p udp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT My question is: How exactly should I understand the ESTABLISHED state in UDP? UDP is stateless. Here is my intuition - I'd like to know, if or where this is incorrect: The man page tells me this: state This module, when combined with connection tracking, allows access to the connection tracking state for this packet. --state ... So, iptables basically remembers the port number that was used for the outgoing packet (what else could it remember for a UDP packet?), and then allows the first incoming packet that is sent back within a short timeframe? An attacker would have to guess the port number (would that really be too hard?) About avoiding conflicts: The kernel keeps track of which ports are blocked (either by other services, or by previous outgoing UDP packets), so that these ports will not be used for new outgoing DNS packets within the timeframe? (What would happen, if I accidentally tried to start a service on that port within the timeframe - would that attempt be denied/blocked?) Please find all errors in the above text :-) Thanks, Chris

  Read the article

• Need advice on a monitoring, reminder and warning application.

  - by cbmeeks

  I am a developer that also has to monitor several things on different servers. Such as: 1) Did all of the MS SQL databases backup last night? 2) Did all of the MySQL databases backup last night? 3) Were the database dumps actually copied to the right folder? 4) How much free space is left on each server's hard drives? 5) How big are folders "abc", "def", "etc" getting? 6) Send emails/alerts when thresholds are reached Etc. Just basically something to help me NOT forget such important things. I thought about writing something myself but didn't want to waste the effort if something is already out there. I would also prefer one application instead of many if I could. Thanks. EDIT Forgot to mention the operating system. These run on Windows Server 2003 and/or 2008. In fact, what would be cool is a program that supports multiple servers from one machine. Something that can log into those servers.

  Read the article

• GRE Tunnel over IPsec with Loopback

  - by Alek

  Hello, I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

  Read the article

• PDU management interface has low availability - product flaw or isolated issue

  - by DeanB

  Our colocation provider has supplied us with APC AP7932 switched 0U PDUs as part of several cabinets they provide us. We have had a lot of trouble with the network management aspect of these PDUs, which I'll describe below. We are moving to cage space in the same datacenter, and plan to provide our own PDUs, so I'd like to determine which enterprise-grade PDUs have been reliable performers from a remote management perspective. Our colo-provided PDUs are configured to support management via an SSL web UI and via telnet. We updated the firmware on all of them to the current version as of NOV2011. They respond to pings reliably, and we have no reason to suspect a network layer issue. However, we experience frequent hangs, timeouts, disconnects, and general unavailability from the embedded management host in all of the PDUs. We occasionally have to restart the microcontroller on the PDU to recover from what appears to be an occasional hard fault. The outlets stay powered (thankfully), but the management aspect is so unreliable that it has become an ops liability - we can't be confident that we could get into the PDU to power cycle a host if we needed to. We have 3 PDUs that all exhibit identical behavior. There are many manufacturers of enterprise-grade 0U switched PDUs, all with comparable features. If I looked at the datasheet for our current PDUs, they would appear to be a good fit -- only with the benefit of suffering through using them do we know to avoid them. I'd like to avoid picking a PDU that looks fine on paper, but has similar reliability issues. What has been others' experience with switched PDUs? Is this level of flakiness normal?

  Read the article

• How to deal with the extremely big *.ost files in a Terminal Server environment which is running out of space

  - by Wolfgang Kuehne

  Our Terminal Server is running out of hard disk space, and the major files which occupy most of the space are *.ost files of the Outook, which come form the users which use the Terminal Server all the time through remote desktop. The Outlook is installed on the Terminal Server and various users can use it. What would be a solution in this case. Is there a way to limit the size of the *.ost files? I read in forums that having the Outlook 2010 set up in Cached Exchange Mode isn't the best practice for an environment where the hdd space is a major constraint. First thing that came to my mind is using folder redirection, and place the ost files (together with the AppData forlder) in a network share, but this does not help, because the ost files are saved a part of the AppData folder which can not be redirected. Then I thought if it is possible to limit the size of the ost file? Or limit the time that it keeps emailed cached, say just emails from the last 6 months are sufficient. Another solutions that came to my mind, moving the ost files somewhere else, this required the old ost file to be removed, and creation of a new one. I am not quite sure if the new OST file will still have cached the emails which where available in the old ost, or will it start caching from where the other one left. What do you suggest?

  Read the article

• Laptop Acer Travelmate 4050 takes over 10 Mins to POST

  - by Belliez

  Hi, I am a computer tech and have received a laptop for repair. I noticed when I turned it on the laptop would not do anything for a min or two (the fan would run up and stop, power led would shine and some cd rom activity then stop). It would sit there with a black screen. Suddenly after a random number of minutes (between 1-20mins!) the Acer BIOS screen would display and POST would happen before booting into Windows XP. It has frozen in XP at various times and pointed towards a CPU fault and over heating. The fan was on its last legs, sounded like a car engine, so I replaced this. Still same issues. I next replaced the CPU like for like. Same problems. Also applied new thermal paste between the cpu and heatsink, when running the fan kicks in occasionally (not as often as I thought it would) and I left it playing mp3, online radio and updating to service pack 3 and it wouldnt freeze. shutting down ok, cold start, not ok. Waits again before showing the BIOS screen. The hard disk was also making a screaming noise (SMART test and chkdsk passed) but I also replaced this. The laptop powers up with and without the battery so dont think its a battery issue. Running out of ideas and wondered if anyone had any advice. Thanks

  Read the article

• OSX 10.6 goes unresponsive

  - by mjb

  This behavior continues to perplex me. My MBP, running 10.6.7, stops responding to all Apple-based software. Whatever software I have open remains open (Terminal, iTunes, Safari), but if I try to use the F-shortcuts or launch any OSX-based software not already open (System Preferences for example) it just bounces in the dock then never launches. I also cannot reboot without hard rebooting. I left terminal open, so I see the following in /var/log/system.log Jun 25 19:39:02 mjb-2 com.apple.ReportCrash.Root[59432]: 2011-06-25 19:39:02.585 ReportCrash[59432:7f1f] Saved crash report for CoreServicesUIAgent[59576] version ??? (???) to /Library/Logs/DiagnosticReports/CoreServicesUIAgent_2011-06-25-193902_localhost.crash Jun 25 19:39:02 mjb-2 com.apple.ReportCrash.Root[59432]: 2011-06-25 19:39:02.586 ReportCrash[59432:b10f] Saved crash report for quicklookd[59571] version ??? (???) to /Library/Logs/DiagnosticReports/quicklookd_2011-06-25-193902_localhost.crash Two requests: (1) please don't send this off to the Apple area so it can die a slow painful rotting death of tumbleweed. (2) Suggest what I should kill -9 or logs to look at to cut this sh*$ out. Cheers, mjb

  Read the article

• ntop to analyse bandwidth usage on multiple ASA 5505

  - by dunxd

  I have set up a netflow server at our data centre, which is connected via VPN to ~40 remote offices using Cisco ASA 5505. The aim is to analyse usage data and find out exactly how the remote connections are being used. I followed through http://techowto.files.wordpress.com/2008/09/ntop-guide.pdf to set up ntop and https://supportforums.cisco.com/docs/DOC-6114 to set up the ASAs. I can see from the Plugin Netflow Statistics page that netflow packets from my ASAs are being received - the counter is increasing. However, I am not seeing any breakdown on the Global Traffic Statistic page after switching to the Netflow interface. I'm just seeing a pie chart showing 100% traffic for eth0. The interfaces and documentation are a little hard to follow so I am not sure I have got things configured correctly. When setting up my NetFlow-device.2 I can specify Virtual NetFlow Interface Network Address - the web UI says This value is in the form of a network address and mask on the network where the actual NetFlow probe is located. is this a Network address (e.g. 192.168.0.0/24) or an actual host IP address (192.167.0.1/24)? If that should be a network address, is this the network in which one of my ASAs is or the network in which my ntop server is? If a host IP address, is this the IP address used by eth0 on my ntop server, the IP address of an ASA, or something else? Do I need a separate virtual interface for each ASA I am collecting netflow data from? Any guidance would be greatly welcome.

  Read the article

• NVIDIA GeForce GT750M drivers for Ubuntu 13.10 on iMac

  - by Eugene B

  I have just got a new iMac 14.3 with 21.5' display. It has Intel i7 processor and NVIDIA GeForce GT750M graphics card with GPU (Device ID: 0x00fe9). I have installed Ubuntu 13.10 on it (dual boot with refit). Everything works fine apart from graphics. It is clear that graphics' not accelerated, and there are no drivers suggested in the "Additional drivers" section. I have tried to Install nvidia drivers from the repository. Download nvidia drivers and install them manually. Follow instructions here. Follow instructions here. Follow instructions here. Install bumblebee. Play around with xorg.conf file. Blacklist nouveau. As you may guess, nothing worked. The weirdest thing is, that when I boot from a LiveCD, it picks up screen resolution and all the rest correctly, though when I install the system to my Hard Drive it clearly does not have proper drivers. Does anyone have any suggestion what to do?

  Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >