Search Results

Search found 13047 results on 522 pages for 'np hard'.

Page 409/522 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >

• Debian software raid 1: boot from both disk

  - by bsreekanth

  I newly installed debian squeeze with software raid.The way I did was, as also given in this thread. I have 2 HDD with 500 GB each. For each of them, I created 3 partitions (/boot, / and swap) I selected the hard drive and created a new partition table I created a new partition that was 1GB. I then specified to use the partition as a Physical Volume for RAID. and used for /boot and enabled bootable. Created another partition, which is of 480 GB, and then specified to use the partition as a Physical Volume for RAID. and used for /. Created another partion and used for swap Then RAID configuration: Through Configure RAID menu - create MD device - (2 for the number of drives, 0 for spare devices) Next select the partitions you want to be members of /dev/MD0. I selected /dev/sda1 and /dev/sdb1 (for /boot) Next select the partitions you want to be members of /dev/MD1. I selected /dev/sda6 and /dev/sdb6 (for /) And no RAID for swap partitions 'Finish Partitioning and write changes to disk' -- Finish the rest of the install like normal Everything is ok now, except I am not sure how to test my raid config. When I pull the power of the HDD, it only boots from one disk. I read in some forum that I may have to install GRUB manually on the other. In Debian Squeeze, there is no grub command. Not sure how to make my software raid bootable from both disk. Also, please comment on my steps above. Anything unusual. I configured /boot partitions of both disks to be boot=yes. Not sure whether that is ok. Thanks, Bsr

  Read the article

• Dedicated server with a lot of storage and good support - and cost-effective

  - by Martin Burger

  Hello, I am from Germany and looking for a dedicated server located in the US with a lot of storage: 750 - 1500 GB. CPU speed and amount of memory are secondary, the server will host large amounts of media files via http and ftp - the basic task is to help people exchange media files. In Germany, there are some good offers, like "Root Server EQ6" at www.hetzner.de. For example, that company provides support of high quality, and their plans are very cost-effective. The plan mentioned above costs about $90 per month and provides two 1500 GB SATA-II HDDs (Software-RAID 1). In the US, I found (amongst others) Go Daddy and rackspace. Go Daddy offers some "Storage Monster" plans that include 2 x 1,000 GB hard drives for about $180 per month - already twice as much as Hetzner above. However, I found some blog and forum entries that complain about the support provided by Go Daddy. Rackspace seems to provide decent support, but they are very "upscale". Their dedicated servers are customizable and start at $419 - thus, about 4.5 times as much as Hetzner. Can anybody recommend a solution / plan that is comparable to the one by Hetzner? Or are prices for dedicated servers in general much higher than in Germany? Regards, Martin

  Read the article

• Relax Linux - it's just me! (filesystem permissions)

  - by Xeoncross

  One of my favorite things about Linux is also the most annoying - file system permissions. In production machines and web servers I love how everything is so secure and locked down - but on development machines it really slows me down. I'll give one example out of the many that I discover weekly. Like most people, I dual-boot Ubuntu and Windows so I can continue using the Adobe CS4 suite. I often design web themes and other things while I'm still using windows. Later I'll boot into Ubuntu to take the themes and write the backend PHP for them. After mounting the windows C: drive partition I can copy the template files over so I can begin editing them. However, thanks to Linux desire to protect me I find that after coping the files I end up with a totally locked set of files where even I don't have read-write permissions. So after carful consideration about the tremendous risks that the HTML files pose to me - I chmod them so that I and apache can begin using them. Now given, the chmod process isn't that hard - but after you chmod enough files per day you get sick of doing it. I'm constantly creating, fetch, editing, and removing files from my user, git repos, php, or other random processes. This is a personal development machine after all. Everything changes on a day by day basis. So my question is, how can I get linux to relax about what I'm doing with my HTML/JS/PHP/TXT/SQL/etc. files so that I can work faster without constantly stopping to chmod things? I pinky-promise I won't hack into my account with an HTML file. ;)

  Read the article

• List symlinks in specific relative directories

  - by Clinton Blackmore

  I have a server that shares out user home folders over the network. Each user has a Cache folder. Sometimes a symlink is used to redirect this folder to the hard drive of whichever machine they are using (and sometimes that doesn't work and they have a broken symlink [which is a matter for another day].) I'm trying to find out which users have symlinks and which don't. Within the shared folder, to get to the Cache folder you would substitute folders like so: $GRADE/$USERNAME/Library/Caches Right now I'm searching to see which users have symlinks and which do not. I've come up with: cd /path/to/shared/home/folders sudo find . -name "Caches" -exec ls -ld {} \; and get results like this: lrwxr-xr-x@ 1 name0 ES_Students 27 Jan 18 11:05 ./CES_Grade_03/name0/Library/Caches -> /tmp/name0/Library/Caches drwx------ 11 name1 ES_Students 374 Dec 8 15:44 ./CES_Grade_03/name1/Library/Caches lrwxr-xr-x@ 1 name2 ES_Students 27 Feb 23 14:27 ./CES_Grade_03/name2/Library/Caches -> /tmp/name2/Library/Caches drwx------ 17 name3 ES_Students 578 Jan 25 11:13 ./CES_Grade_03/name3/Library/Caches drwx------ 12 name4 ES_Students 408 Mar 22 13:09 ./CES_Grade_03/name4/Library/Caches but it nags at me that there must be a better way. Yes, it is good enough, and a one-off task, but I want to know how to do it right! Surely, I should be able to do something like: cd /path/to/shared/home/folders sudo ls -ld **/**/Library/Caches I'm afraid that I don't know the proper syntax or if there is a recursive folder-replacing wildcard format in bash, and my google-fu failed me. So, how do I properly formulate the search?

  Read the article

• Backup with Mercurial and Robocopy?

  - by Andrew Neely

  The Problem We would like to backup our critical files from several network shares to a removable hard drive. We want to automate the backup so we don't have to remember to run it. It needs to finish overnight. Furthermore, we want to be able to preserve multiple versions of each file so we can back out of our user's mistakes easier. Background Information I work in a large Windows-based enterprise with a centralized IT section who is responsible for all backups. Their backups are geared towards disaster recovery and not user error, and require upper-level management approval for any non-disaster recoveries. Several times we have noticed that our backups have failed, we weren't notified. I do not have administrative rights to the server or my desktop. We are trying to backup some 198,000 files spanning about 240 gigabytes. These files rarely change. Our backup drive is one terabyte. My Proposed Solution What I would like to do is to write a batch file using Robocopy with the /mir option along with Mercurial SCM to store all versions of the file. I would do an hg add followed by an hg commit before each execution of Robocopy to save the current state, and then make a mirrored copy of the file structures. The problem is the /mir will delete every folder not present in the source, and Mercurial stores the repository in a .hg folder in the destination folder. Does anybody know how I could either convince Mercurial to store the .hg folder elsewhere, or convince Robocopy not to delete it from the destination? I'm trying to avoid writing a custom program do to copying.

  Read the article

• Windows Bluescreen - atikmpag.sys

  - by Mochan

  Information Name: atikmpag.sys bluescreen (BSOD or BlueScreen of Death) Error code: 0x00000116 Appears when: Playing games, watching videos Can be reproduced: Yes Cause: Graphics Card is the main assumption System Specifications Before we begin - I will inform you of my specifications. OS: Windows 7 x64 Home Edition Model: Dell Inspiron 15R Special Edition (aka Inspiron 7520) (Add 2GB of RAM to the model linked) Hard Drive: 1TB CPU: Intel Quad-Core i7 Sandy Bridge (I think) Processor at 2.10GHz (I think it can be clocked to 3GHz?) RAM: 6GB (I think 1 x 4GB and 1 x 2GB) Display: 15.6" HD (1366x768) Graphics: AMD Radeon HD 7500M 2GB Details So now that you know some basics about my computer, I'll get to the problem. Being an Ubuntu user I hardly use Windows, but occasionally I do. Like to run Skyrim and other games incompatible with Linux and WINE. The new Sims 3 Seasons patch is also now not supported. When playing these two games and other ones, theoretically. I have also heard others saying that while watching HD movies and video series it also happens. While watching the bluescreen as it happens, I see it is the 'atikmpag.sys' error. I have not installed much and nothing significant. I think I have downloaded Skyrim, Firefox and The Sims 3. I haven't done much more... since Ubuntu is definitely the best in comparison! (No hate, just a joke :P). I can reproduce it easily (just by running a game for less than a minute). It is always there each time, but it's never at a specific time or anything. So far I have found that it may be caused by lack of power to the graphics card, or it may be damaged or fried. Since I've had the computer for a mere 4 months (and have had other problems with it also). I have contacted Dell but they are useless beyond belief. Anyone with any information, solutions or details are encouraged to share your knowledge, as it would be immensely appreciated.

  Read the article

• .NET 3.5 installation comes up with Error 0x800F0906, then 0x800F0081F using dism

  - by Austin Meadows

  I've recently tried installing .NET 3.5 for an application on Windows 8.1. I used the OS's popup thing to download/install .NET 3.5 and always get error code 0x800F0906. Upon further research, I found I would have to pop in my Windows 8 CD and install it with this command, where "E:\" is where my CD is mounted: Dism /online /enable-feature /featurename:NetFx3 /All /Source:E:\sources\sxs /LimitAccess This and any derivative of it (e.g., removing /LimitAccess) has not worked for me and has either given me the same error code (0x800F0906) or a different one, 0x800F0081F. I've even copied the sxs folder to my hard drive, just in case something was going on with the CD Drive, only to have the same results. In that case, I used this command line: Dism /online /enable-feature /featurename:NetFx3 /All /Source:C:\dotnet35 /LimitAccess I find this surreal because in both cases, the files are indeed there but the program thinks it's not. Here's the CBS.log file. Any ideas on how to fix this? Any help is very appreciated :) EDIT: I now have a proper dism.log file, I'm not sure what happened to the last one or why it did that. Here's the link to the new log file. It's interesting to note that it doesn't recognize some of the commands in the script such as "featurename" or "source".

  Read the article

• Midnight Commander Woes: Output while panels are active, and tab completion.

  - by Eddie Parker

  I'm trying out midnight commander (loved Norton back in the day!) and I'm finding two things hard to work out. I'm curious if there's ways around this or not however. 1) If the panels are active and I issue a command that has a lot of output, it appears to be lost forever. i.e., if the panels are visible and I cat something (i.e., cat /proc/cpuinfo), that info is gone forever once the panels get redrawn. Is there anyway to see the output? I've tried 'ctrl-o', but it appears to just give me a fresh sub-shell and wipes the previous output away. Pausing after every invocation is a bit irritating, so I'd rather not use that option. 2) Tab completion for commands When mc is running, it consumes the tab character for switching panels. Is there any way to get around this so I can still type in paths and what not on the command line? I'm running cygwin if that matters at all.

  Read the article

• Computer Comparison - which is "better"

  - by David Murdoch

  A company I work with recently replaced their old server and gave it to me. Their old server is a Dell PowerEdge 2600. I've been playing with the machine and even installed Windows Server 2008 on it...and it seems to run it pretty well. Here are the specs for the two machines: Dev Machine: AMD Athlon64 3000+ 2.38 GHz (overclocked from 1.8GHz [@ 280x8.5] - it is stable-ish) Memory (RAM): 1x1GB OCZ PC3200 (Dual-Channel) 300GB HD OS: Windows XP Pro (32bit) SuperPi 1M digit test: 40 seconds Dell PowerEdge 2600 Server: Intel Xeon CPU 2.8GHz 2.8GHz Memory (RAM): 512MBx2 (PC2700, not dual channel) 68GB HD (RAID 5) OS: Windows Server 2000 (32bit) SuperPi 1M digit test: 56 seconds [using 1 processor] (Themes and Aero-Flass UI turned off, of course) I use my computer to regularly run Photoshop CS5, Illustrator CS5, Flash CS5, 5 browsers (Chrome, FF, IE, Safari, Opera), iTunes, Visual Studio 2010, and Kaspersky Internet Security 2010 [sometimes simultaneously :-) ]. The SuperPi test has my dev machine coming in about 30% faster than the Server machine...though this could be due to the server running "Vista" with background processes prioritized. Do you think it would be realistic/advantageous for me to move from my dev machine to the Dell PowerEdge 2600? Is it possible to install additional DVD drives/burners on the server? Can I install my internal 300 GB hard drive on the server? Can I add some USB 2.0 ports? Note: I'll probably install Win XP Pro on the dev machine if I do switch. If not, are there any creative and useful way for me to take advantage of this server (with the goal of faster computing)?

  Read the article

• Encryption setup for Linux NAS?

  - by Daniel

  There's a bazillion hard disk encryption HOWTOs, but somehow I can't find one that actually does what I want. Which is: I have a home NAS running Ubuntu, which is being accessed by a Linux and a Win XP client. (Hopefully MacOS X soon...) I want to setup encryption for home dirs on the NAS so that: It does not interfere with the boot process (since the NAS it tucked away in a cupboard), the home dirs should be accessible as a regular file system on the client(s) (e.g. via SMB), it is easy to use by 'normal' people, (so it does not require SSH-ing to the NAS, mount the encrypted partition on command line, then connecting via SMB, and finally umount the partition after being done. I can't explain that to my mom, or in fact to anyone.) does not store the encryption key the NAS itself, encrypts file meta-data and content (i.e. safe against the 'RIAA' attack, where an intruder should not be able to identify which songs are in your MP3 collection). What I hoped to do was use Samba + PAM. The idea was that on connecting to the SMB server, I'd have to enter the password on the client, which sends it to the server for authentication, which would use the password to mount the encrpytion partition, and would unmount it again when the session was closed. Turns out that doesn't really work, because SMB does not transmit the password in the plain and hence I can't configure PAM to use the incoming password to mount the encrypted patition. So... anything I'm overlooking? Is there any way in which I can use the password entered on the client (e.g. on SMB connect) to initiate mounting the encrypted dir on the server?

  Read the article

• Why can't I install Java?

  - by Patrick

  I've been searching high and low for someone who can help me. I've been trying for a month. A month. to install Java on my new PC to no avail. No tech support forum can seem to help me. It all started while playing tekkit one day. I kept running out of memory (using the 32-bit JRE 7 u45) so I decided to install the 64-bit version. I uninstalled the 32-bit version first, for some reason, and downloaded the 64 bit runtime. In the installer, I go through all the normal screens until the installation progress bar appears. Then, it just sits there. No progress is made. No CPU is used by the installer, or any of its dependencies. The installer will stay like this for hours, days, and in one case a whole week without doing anything at all. I've tried installing older versions, the 32-bit version, even Java 6 and none of them will install. UAC is disabled, I've run regedit, CCleaner, and any other "fix-it" program there is. It's getting to the point where I may just have to wipe my hard drives and start over. I have several applications that require java, so this is an absolute necessity. Please, please, someone have the answer. Here are my system specs: -Intel i7-3770k -AsRock z77 Extreme3 -Samsung 840 pro SSD -WD Caviar Black 1tb

  Read the article

• Deleting files in the windows installer folder

  - by qw3n

  How do you clean up the windows/installer folder on a xp machine. I looked on different forums, but the tool many mention is no longer officially supported and from what I understand not specifically for this task. Also, I was confused on which tool to use or how to use it. The reason I ask this is I have an older computer with ~86gb drive and ~80gb of is being used by the windows/installer. I'm assuming that at least some of these are glitches and shouldn't be in there. Note that the person who uses the computer mentioned trying to interrupt an install at some point and I don't know if this has anything to do with it. Also, there are not that many programs installed on this computer ~25. Also, I know that similar questions has been asked several times already, but the accepted answer Is it safe to delete from C:\Windows\Installer? is mainly talking about is it safe to delete (along with most of the duplicates). I'm asking how to find and delete the files that shouldn't be there especially since were not talking 5-10gb but something that practically fills the entire hard drive, and for those who are wondering I ran CCleaner, but it doesn't seem to check this folder.

  Read the article

• Robocopy launches and then hangs/just sits there

  - by NateO

  I'm setting up an archive process to store old files on an external hard drive. The computer in question is running Windows 7 Pro 32bit. We have a server folder with 150,000+ files in it, most of which are pretty small (below 200k). I'm trying to use robocopy in a batch file to do this. It was working fine the other day, now all it does upon launch is sit there. It shows me all the options and whatnot, and also lists the number of files in the directory and the directory itself, but it never gets past that line. If I switch the destination to the local C drive, it eventually starts copying files. Is there something in my batch file that needs to change? Or could there be a problem with the external Western Digital drive that I'm using? The WD drive currently is holding about 175,000 files. Here is the one line batch file I have: robocopy "\\cgifp01\Prepress\Public\ImportedPDF" "E:\OldFiles" *.* /R:2 /W:10 /MINAGE:15 /MOV /B /XJ /XF "blank_test.pdf" Thanks for any tips or ideas. Nate

  Read the article

• Software to capture 3d geometry?

  - by user712092

  Programs I found I found these programs to capture OpenGL 3D scene : 3D Ripper, OpenGL and D3D geometry capture, there are some solved problems with 3D Ripper GLIntercept captures OpenGL function calls OpenGL Extractor captures 3d geometry; should work as plugin for GLIntercept another tool to capture OpenGL 3D data EDIT: There is also HijackGL which changes how a scene is rendered so it probably can be used to capture geometry; it is backed up by a academic paper; it is just just a nice program, not related to what I want i think (or it would might be hard to change it to be for what I want, because it would require programming). 3D Ripper captures geometry, textures and shaders. OpenGL Extractor captures just geometry ... General questions about such programs What is Your experience with these programs? Which of these programs would You recommmend? Do You know other such programs? Were there any problems with them, or are there problems with them in general? Are there programs which work best overall, or is it specific to certain 3d applications? What I need to do? I am looking to program which can capture 3d geometry for study purposes. And also for a program to capture 3D animation (frames of 3d animation). I tried only 3D Ripper because application I try to capture data from is on Direct 3D. 3D Ripper works with at least Direct 3D 9, this application has Direct 3D 6. Are there applications which work with older version of Direct 3D? Thank You very much. :) (I was verbose in link names because I want them to be indexed better by search engines.)

  Read the article

• What folders to encrypt with EFS on Windows 7 laptop?

  - by Joe Schmoe

  Since I've been using my laptop more as a laptop recently (carrying it around) I am now evaluating my strategy to protect confidential information in case it is stolen. Keep in mind that my laptop is 6 years old (Lenovo T61 with 8 GB or RAM, 2GHz dual core CPU). It runs Windows 7 fine but it is no speedy demon. It doesn't support AES instruction set. I've been using TrueCrypt volume mounted on demand for really important stuff like financial statements forever. Nothing else is encrypted. I just finished my evaluation of EFS, Bitlocker and took a closer look at TrueCrypt again. I've come to conclusion that boot partition encryption via Bitlocker or TrueCrypt is not worth the hassle. I may decide in the future to use Bitlocker or TrueCrypt to encrypt one of the data volumes but at this point I intend to use EFS to encrypt parts of my hard drive that contain data that I wouldn't want exposed. The purpose of this post is to get your feedback about what folders should be encrypted from the general point of view (of course everyone will have something specific in addition) Here is what I thought of so far (will update if I think of something else): 1) AppData\Local\Microsoft\Outlook - Outlook files 2) AppData\Local\Thunderbird\Profiles and AppData\Roaming\Thunderbird\Profiles- Thunderbird profiles, not sure yet where exactly data is stored. 3) AppData\Roaming\Mozilla\Firefox\Profiles\djdsakdjh.default\bookmarkbackups - Firefox bookmark backup. Is there a separate location for "main" Firefox bookmark file? I haven't figured it out yet. 4) Bookmarks for Chrome (don't know where it's bookmarks are) and Internet Explorer ($Username\Favorites) - I don't really use them but why not to secure that as well. 5) Downloads\, My Documents\ and My Pictures\ folders I don't think I need to encrypt, say, latest service pack for Visual Studio. So I will probably create subfolder called "Secure" in all of these folders and set it to "Encrypted". Anything sensitive I will save in this folder. Any other suggestions? Again, this is from the point of view of your "regular office user".

  Read the article

• I need an admin toolset for Windows 2003 and 2008

  - by eugeneK

  i know this is way too general question but anyway. I need few tools, will write down my tasks as sysadmin and if you have any to automate my job i would be glad to hear. I don't mind paying for software needed unless it is way too expensive. First of i backup all files on server at local/office storage. I 7zip all SQL backup files and then move them over network to centralized location and then FTP them from office PC which has no FTP server installed and cannot have one. Backups happen at 4AM at the morning thus i need to set time for compressing and afterward FTPing. Then i FTP all IIS web application as differentiation backup, same goes for VOD movies. Second tool i need is system monitor which will monitor all servers from themselves and from external location for CPU/Memory/Hard disk and other basic failures. This tool should able to execute Website address with parameters which will send me an email with all report on failure. Third tool i need is a way to get all Event Logs from 10 Windows based servers without accessing each any of them manually. If you know any solution, thanks in advance.

  Read the article

• Line-length-tolerant XML diff

  - by Jon Skeet

  I've looked at the answers to this question, and unfortunately none of them has helped me so far. Not to beat about the bush, the second edition of C# in Depth is now in copy edit. I want to be able to see what the copy editor's done really easily, so I can reject or accept his changes. We're using a modified form of docbook, but I'm happy enough looking at the raw XML source. All fine so far - except that when the copy editor makes a change, that can change the line wrapping. So something that used to read: <para>Foo bar baz second line</para> now reads <para>Foo bar grontle baz second line</para> Now the real change here is the insertion of "grontle". I don't care that "baz" has moved from the first line to the second line... but all the diff tools I've seen do. I realise that one option would be to reformat the whole document (or possibly just whole paragraphs) into single lines... but that's then really hard to read, because diff tools don't wrap when they're displaying. I'm sure I can manage with the tools I've got, but if anyone knows of anything better, I'd be really glad to hear about it. I suspect my publishers would too :) (I've included the Windows tag here because I'd really need it to be available on Windows. I'd like to hear about any non-Windows software too, but only in case I could help to build it on Windows :)

  Read the article

• Two audio streams - headphones and speakers

  - by Sylvester

  What I want (this is probably hard for most to answer, as this is a very unique setup) is to have two different streams (this means audio splitter is not an option, as it will still only be one stream) of audio - one through the headphones and one through the main speakers. I can do the audio rerouting using virtual audio cables, however the problem is this: i cannot get both headphones AND speakers to play even just one stream, let alone two seperate ones. using "split front and back audio into seperate streams is not an option, as the actual MB F_PANEL is faulty (nothing to do with the case front panel, just so you know. that works fine) So, first things first. I need it to recognise the headphones as a seperate audio device so that Virtual Audio Cables will detect it and allow me to route the necessary audio to the headphones only. I also need to be able have sound play through speakers and headphones together what i want to achieve overall, is this: have the ENTIRE computer's sounds picked up by VAC, and stream them to Line1. then have Line1 stream to the headphones. that way whatever's being streamed is heard through the headphones, while the entire system sounds (including those not streamed) are played through speakers.

  Read the article

• Why does USB thumb drive screw up boot sequence?

  - by Carl B

  I am looking for understanding to a boot issue. I have at times had some files and such that I save and retrieve from my thumb drive. I use the front panel as it is nice and easy to get to and I typically power down my system nightly. If I forget to pull the drive and power on the system, it becomes the first bootable device. As there is no OS on the USB Drive I get the BOOTMGR is missing press CTRL+ALT+DELETE. When I go into BIOS to see Boot sequence, there’s the thumb drive up top, DVD drive is missing and not found in the list of devices. All of the hard drives are next in line. When I pull the USB drive, and reboot, everything is back to normal. Old boot sequence is in place, DVD drive right where it should be and no issues. So why does this happen with a USB drive in port at boot up? If it can’t be booted from, shouldn’t the next drive be attempted? Note: This happens when the thumb drive is plugged into a USB port on the front panel. It does not seem to happen on rear panel ports.

  Read the article

• Diagnosing SAN connectivity issues (RHEL5)

  - by Matthew

  We are currently utilizing GFS2 to share a SAN LUN between 3 servers. However due to a feature problem with vendor software we are using, we currently have the volume unmounted on two of the boxes, and are instead exporting the GFS2 filesystem via NFS from the first one (the software requires some weird locking mechanics that GFS2 doesn't support). As of this morning, NFS was no longer able to read/write to the volume from any of the servers, including the NFS server. I then tried checking the normal mount (the directory that is exported on the NFS server) and I received a weird input/output error just trying to CD into it. When I tried running multipath, I got a DM error, however multipath -l worked just fine. I tried unmounting the GFS2 volume, and the CLI hung. I ran init 0 which killed most services, but then the shutdown appeared to have been hung. I logged in via out of band access (hp ILO) and saw that the shutdown was hung trying to unmount GFS2 volumes. My main priority was getting the box back online so after about 5 minutes of waiting I did a hard reset. I am now trying to figure out what went wrong. What are the correct logs to investigate? I've never run into SAN issues like this before. The SAN is connected via 2 fibre connections. Any help would really be appreciated. Everything appears to be up and functional now.

  Read the article

• How much memory will a Windows file-server be able to use effectively.

  - by Zoredache

  In the near future we will be moving our fileserver to a newer box that will be running Windows 2008R2. I want to know how much memory Windows will be able to use for a system that is just a file-server. In searching around I found an old document for Windows 2000 that mentions the maximum size of the file-system cache is 960MB. I suspect this limit no longer applies, but is there a new limit? The file server will be just a standard Windows fileserver. It will have 1TB of attached storage. The large majority of the of the files accessed during the day are just typical Office documents. There are 80-100 people usually using the fileserver during a typical day. This system will only be used as a file server, it doesn't have any other roles. In Windows 2008r2 is there any hard limits for the filesystem cache? What are they? The server we will be re-using for this purpose currently has 4GB of memory, but it can be maxed out at 16GB. Is there any value in doing this for a Windows file-server? Are there any performance counters can I look at on the existing 2003 fileserver that will tell me if adding more memory will be worthwhile.

  Read the article

• Win7 Command Prompt drives not available

  - by jmerrill

  I have the opposite problem compared to the author of this question: Hard drive access denied from Windows Explorer (but works from command prompt as Admin) I can see all the drive letters for a particular server in Windows Explorer, and can navigate through them exactly as would be expected. The drive letters are displayed in Explorer in parens to the right of the path info -- finalpathportion (\\server\otherpathportions) (driveletter:) e.g. jmerrill (\\server\users) (H:) But the drive letters are not usable in a "Run as Administrator" command prompt. They have worked in the past, but I have since rebooted. I thought that perhaps I had to start a new command prompt having visited them in Explorer -- but that did not help. "net use" in the command prompt shows Unavailable H: \\server\users\jmerrill Microsoft Windows Network with similar info for the other drives. I can do net use h: /d net use h: \\server\users\jmerrill for each drive, and get the letters to be available in the command prompt. It is perhaps obvious that I don't think that it should be necessary to do that. Does anyone have any ideas?

  Read the article

• Physical-to-virtual for personal use

  - by Journeyman Geek

  One of my current projects involves reducing the number of old computers lying around. So far, the office systems have been downsized from 5 to 2. One system which had no data on it was dumped entirely, while three other identical boxes were consolidated into to one (I swap hard drives as needed and they just work(tm)). I want to make further cuts. The physical systems in question all run windows xp sp3, and were old Pentium 4s with 256 MB of RAM. Currently, I have got a VirtualBox running on another system. My intention is to migrate all services to that. We can assume that disk space and RAM on the host is not an issue. I'd rather not go with a client-server physical-to-virtual (P2V) method like what VirtualBox uses now. I have a few specific concerns as well - specifically whether I'd need to reactivate or sysprep for dissimilar hardware first. An offline tool for imaging (Windows or Linux) would not be an issue since the drives could be mounted onto another system I have anyway or I could use a LiveCD. What would be my options for P2V conversion, and what would I need to keep in mind when doing this?

  Read the article

• PostgreSQL 8.4 - Tablespace Optimization

  - by FloE

  I'm currently running a PostgreSQL Database with about 1.5 billion rows / 500 GB of data (including indices). There are several schemata: on for the (read only, irregular changes / updates) 'core-model' and one for every user (about 20 persons). The users can access the core and store data in their own schema, so everything is located in one database. The server runs with CentOS and PostgreSQL 8.4 and is used for scientific studies, exploration etc and is running quite well. These days an upgrade of the DB storage hard disks arrive - all with the same performance as the old ones. I'm looking for the best way to distribute the data on these disks. It would be possible to separate frequently used objects (the core-data) from the user schemata, but I'm not sure if this is really worth the effort. It seems to be a much better idea to move the WAL files (pg_xlog directory) to its own partition. http://www.postgresql.org/docs/8.4/static/wal-internals.html What are your opinions? Are there any tablespace- or partitioning-related performance documentations / benchmarks?

  Read the article

• MSSQLSERVER Will Not Start - Event ID 913 and 1814

  - by ThaKidd

  Hello ServerFault! I need some serious help. I have a major database server down and am scratching my head at how to fix it. The server was hit by rolling black outs last week in Dallas and sense then, Microsoft SQL 2005 SP2 will not start up. I am getting the following errors (both when starting the service and while trying to execute mssqlsrv.exe -c -f -m: Event Type: Error Event Source: MSSQLSERVER Event ID: 913 Could not find database ID 3. Database may not be activated yet or may be in transition. Reissue the query once the database is available. If you do not think this error is due to a database that is transitioning its state and this error continues to occur, contact your primary support provider. Please have available for review the Microsoft SQL Server error log and any additional information relevant to the circumstances when the error occurred. and... Event Type: Information Event Source: MSSQLSERVER Event ID: 1814 Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized. I have tried to rename the tempdb.mdf to tempdb.old with no success. I have checked and have 193 GB of free hard drive space. What else might cause this problem? Could the server need a chkdsk ran on it or do I need to be looking at some area of the database server? Any help is greatly appreciated. Thank you in advance.

  Read the article

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >