Search Results

Search found 29111 results on 1165 pages for 'program structure'.

Page 411/1165 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

  • Use a subdirectory as root with htaccess in Apache 1.3

    - by Andrew
    I'm trying to deploy a site generated with Jekyll and would like to keep the site in its own subfolder on my server to keep everything more organized. Essentially, I'd like to use the contents of /jekyll as the root unless a file similarly named exists in the actual web root. So something like /jekyll/sample-page/ would show as http://www.example.com/sample-page/, while something like /other-folder/ would display as http://www.example.com/other-folder. My test server runs Apache 2.2 and the following .htaccess (adapted from http://gist.github.com/97822) works flawlessly: RewriteEngine On # Map http://www.example.com to /jekyll. RewriteRule ^$ /jekyll/ [L] # Map http://www.example.com/x to /jekyll/x unless there is a x in the web root. RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/jekyll/ RewriteRule ^(.*)$ /jekyll/$1 # Add trailing slash to directories without them so DirectoryIndex works. # This does not expose the internal URL. RewriteCond %{REQUEST_FILENAME} -d RewriteCond %{REQUEST_FILENAME} !/$ RewriteRule ^(.*)$ $1/ # Disable auto-adding slashes to directories without them, since this happens # after mod_rewrite and exposes the rewritten internal URL, e.g. turning # http://www.example.com/about into http://www.example.com/jekyll/about. DirectorySlash off However, my production server runs Apache 1.3, which doesn't allow DirectorySlash. If I disable it, the server gives a 500 error because of internal redirect overload. If I comment out the last section of ReWriteConds and rules: RewriteCond %{REQUEST_FILENAME} -d RewriteCond %{REQUEST_FILENAME} !/$ RewriteRule ^(.*)$ $1/ …everything mostly works: http://www.example.com/sample-page/ displays the correct content. However, if I omit the trailing slash, the URL in the address bar exposes the real internal URL structure: http://www.example.com/jekyll/sample-page/ What is the best way to account for directory slashes in Apache 1.3, where useful tools like DirectorySlash don't exist? How can I use the /jekyll/ directory as the site root without revealing the actual URL structure? Edit: After a ton of research into Apache 1.3, I've found that this problem is essentially a combination of two different issues listed at the Apache 1.3 URL Rewriting Guide. I have a (partially) moved DocumentRoot, which in theory would be taken care of with something like this: RewriteRule ^/$ /e/www/ [R] I also have the infamous "Trailing Slash Problem," which is solved by setting the RewriteBase (as was suggested in one of the responses below): RewriteBase /~quux/ RewriteRule ^foo$ foo/ [R] The problem is combining the two. Moving the document root doesn't (can't?) use RewriteBase—fixing trailing slashes requires(?) it… Hmm…

    Read the article

  • FileNotFoundException when reading .xml file to parse

    - by thechiman
    I'm writing a program in Java where I read in data from an XML file and parse it. The file is imported into a folder named "Resources" in the src directory of my project. I'm using Eclipse. When I run the program, I get the following error: java.io.FileNotFoundException: /Users/thechiman/Dropbox/introcs/PSU SOC Crawler/resources/majors_xml_db.xml (No such file or directory) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.<init>(FileInputStream.java:106) at java.io.FileInputStream.<init>(FileInputStream.java:66) ... The relevant code is here: private void parseXML() { //Get a factory DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance(); try { //Use factory to get a new DocumentBuilder DocumentBuilder db = dbf.newDocumentBuilder(); //Parse the XML file, get DOM representation dom = db.parse("resources/majors_xml_db.xml"); } catch(ParserConfigurationException pce) { pce.printStackTrace(); } catch(SAXException se) { se.printStackTrace(); } catch(IOException ioe) { ioe.printStackTrace(); } } I do not understand why I'm getting the FileNotFoundException when the file is there. Thanks for the help.

    Read the article

  • How to specify different Debug/Release output directories in QMake .pro file

    - by esavard
    I have a Qt project and I would like to output compilation files outside the source tree. I currently have the following directory structure: / |_/build |_/mylib |_/include |_/src |_/resources Depending on the configuration (debug/release), I will like to output the resulting files inside the build directory under build/debug or build/release directories. How can I do that using a .pro file?

    Read the article

  • How to animate CornerRadius property with four distinct values - "0,0,0,0" to "0,0,10,10" ?

    - by banzai
    Hi all I have to transition the CornerRadius property of a Border from value "0,0,0,0" to value "0,0,10,10" via an animation. This must be done directly in the XAML file w/o using code behind other than a ValueConverter or similar. I think CornerRadius is animatable using an ObjectAnimationUsingKeyFrames - but how to animate just two of the four values of the CornerRadius structure ? Thanks in advance !

    Read the article

  • Lazy Loading in dynatree

    - by gnomixa
    In this component http://wwwendt.de/tech/dynatree/index.html under 5.4 Loading child nodes on demand ('lazy loading') it seems that the only way to load the tree nodes in a lazy manner is to grab them from web service. What if I want to grab the nodes from a data structure? Any advice?

    Read the article

  • Display ñ on a C# .NET application

    - by mmr
    I have a localization issue. One of my industrious coworkers has replaced all the strings throughout our application with constants that are contained in a dictionary. That dictionary gets various strings placed in it once the user selects a language (English by default, but target languages are German, Spanish, French, Portuguese, Mandarin, and Thai). For our test of this functionality, we wanted to change a button to include text which has a ñ character, which appears both in Spanish and in the Arial Unicode MS font (which we're using throughout the application). Problem is, the ñ is appearing as a square block, as if the program did not know how to display it. When I debug into that particular string being read from disk, the debugger reports that character as a square block as well. So where is the failure? I think it could be in a few places: 1) Notepad may not be unicode aware, so the ñ displayed there is not the same as what vs2008 expects, and so the program interprets the character as a square (EDIT: notepad shows the same characters as vs; ie, they both show the ñ. In the same place.). 2) vs2008 can't handle ñ. I find that very, very hard to believe. 3) The text is read in properly, but the default font for vs2008 can't display it, which is why the debugger shows a square. 4) The text is not read in properly, and I should use something other than a regular StreamReader to get strings. 5) The text is read in properly, but the default String class in C# doesn't handle ñ well. I find that very, very hard to believe. 6) The version of Arial Unicode MS I have doesn't have ñ, despite it being listed as one of the 50k characters by http://www.fileinfo.info. Anything else I could have left out? Thanks for any help!

    Read the article

  • PHP: How to find connections between users so I can create a closed friend circle?

    - by CuSS
    Hi all, First of all, I'm not trying to create a social network, facebook is big enough! (comic) I've chosen this question as example because it fits exactly on what I'm trying to do. Imagine that I have in MySQL a users table and a user_connections table with 'friend requests'. If so, it would be something like this: Users Table: userid username 1 John 2 Amalia 3 Stewie 4 Stuart 5 Ron 6 Harry 7 Joseph 8 Tiago 9 Anselmo 10 Maria User Connections Table: userid_request userid_accepted 2 3 7 2 3 4 7 8 5 6 4 5 8 9 4 7 9 10 6 1 10 7 1 2 Now I want to find circles between friends and create a structure array and put that circle on the database (none of the arrays can include the same friends that another has already). Return Example: // First Circle of Friends Circleid => 1 CircleStructure => Array( 1 => 2, 2 => 3, 3 => 4, 4 => 5, 5 => 6, 6 => 1, ) // Second Circle of Friends Circleid => 2 CircleStructure => Array( 7 => 8, 8 => 9, 9 => 10, 10 => 7, ) I'm trying to think of an algorithm to do that, but I think it will take a lot of processing time because it would randomly search the database until it 'closes' a circle. PS: The minimum structure length of a circle is 3 connections and the limit is 100 (so the daemon doesn't search the entire database) EDIT: I've think on something like this: function browse_user($userget='random',$users_history=array()){ $user = user::get($userget); $users_history[] = $user['userid']; $connections = user::connection::getByUser($user['userid']); foreach($connections as $connection){ $userid = ($connection['userid_request']!=$user['userid']) ? $connection['userid_request'] : $connection['userid_accepted']; // Start the circle array if(in_array($userid,$users_history)) return array($user['userid'] => $userid); $res = browse_user($userid, $users_history); if($res!==false){ // Continue the circle array return $res + array($user['userid'] => $userid); } } return false; } while(true){ $res = browse_user(); // Yuppy, friend circle found! if($res!==false){ user::circle::create($res); } // Start from scratch again! } The problem with this function is that it could search the entire database without finding the biggest circle, or the best match.

    Read the article

  • Map denormalized hibernate

    - by Jurgen H
    I have a Summary class which contains a list of Qualities. A Quality contains a String name and int value. This data is stored in a denormalized db structure, one table only, for both Summary and Quality. Quality table: id, somefileds, qualityname1, qualityvalue1, qualityname2, qualityvalue2, qualityname3, qualityvalue3 For each quality name & value pairs, a new Quality object must be inserted in the Summary class. How to map this in hibernate (xml hibernate mapping)?

    Read the article

  • Finding min and max values

    - by user01
    I am trying to write a simple program that reads integers from a data file and outputs the minimum and maximum value. The first integer of the input file will indicate how many more integers will be read, and then the integers will be listed. My program compiles without any problem, however, it returns values that are not part of the set in my test data file. Could anyone help with diagnose this issue? int main(){ FILE *fp = fopen("data.txt", "r"); int count; int num; int i; int min = 0; int max = 0; fscanf (fp, "%d", &count); for (i = 0; i < count; i++) fscanf( fp, "%d", &i); { if (num < min) min = num; if (num > max) max = num; } fclose (fp); printf("Of the %d integers, the minimum value is %d and the maximum value is %d \n", count, min, max);}

    Read the article

  • Creating a bundle - What's going wrong?

    - by joeylange
    Hello everyone, I've got a relatively simple one here. I'm making bundles to live inside the Resources folder of my application (and possibly in the Application Support folder). These bundles will contain template information for the data the application handles. I've constructed a bundle, with extension "booksprintstyle", and the directory structure is up to spec. I have an Info.plist all set and I think I've filled in all the values I need to. Do I need to change something in my App to have these folders-with-extensions recognized as bundle files, or am I missing something in my bundle structure? I noticed that some bundles have a file called PkgInfo; is that important? Below is the Info.plist from my bundle. <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleDevelopmentRegion</key> <string>English</string> <key>CFBundleGetInfoString</key> <string>1.0, Copyright © 2009 Joey Lange</string> <key>CFBundleIdentifier</key> <string>net.atherial.books.exporter.printingpress.printstyle</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>Books Print Style - Generic</string> <key>CFBundlePackageType</key> <string>BNDL</string> <key>CFBundleShortVersionString</key> <string>1.0</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleDisplayName</key> <string>Books Print Style - Generic</string> <key>NSHumanReadableCopyright</key> <string>Copyright © 2009 Joey Lange</string> <key>CFBundleVersion</key> <string>1.0</string> </dict> </plist>

    Read the article

  • Can a single developer still make money with shareware?

    - by Wouter van Nifterick
    I'm wondering if the shareware concept is dead nowadays. Like most developers, I've built up quite a collection of self-made tools and code libraries that help me to be productive. Some examples to give you an idea of the type of thing I'm talking about: A self-learning program that renames and orders all my mp3 files and adds information to the id3 tags; A Delphi component that wraps the Google Maps API; A text-to-singing-voice converter for musical purposes; A program to control a music synthesizer; A Gps-log <- KML <- ESRI-shapefile converter; I've got one of these already freely downloadable on my website, and on average it gets downloaded about a 150 times per month. Let's say I'd start charging 15 euro's for it; would there actually be people who buy it? How many? What would it depend on? If I could get some money for some of these, I'd finish them up a bit and put them online, but without that, I probably won't bother. Maintaining a SourceForge project is not very rewarding by itself. Is there anyone who is making money with shareware? How much? Any tips?

    Read the article

  • Multimedia files written over WAN are getting truncated

    - by Dean
    I use the windows Multimedia API to create .wav files. 1. Open file with mmsioOpen 2. Creates WAVE,frm and data chunks using mmioCreateChunk 3. Write audio data using mmioWrite 4. Ascend out of the chunks using mmioAscend 5. Close file using mmioClose The file is being written into a temporary location, so after it has been closed it gets copied to another location using the CopyFile. This program is written in C++ and works great until the file it is writing resides over a WAN in a different city or country. The end result is a wav file that should be 20-30 seconds long ends up being 4 secodns long. It is always the last bit that is missing, so when you play it back it just stops before then of the recording. I initially thought that maybe I was copying the file too soon so as a test I put in a pause of 30 seconds after closing the file using Sleep(30000), but this made no difference to either it being truncated or by how much. I have modified the program to write to a file in parrallel using CreateFile and WriteFile, and the result is the same, so it is not an issue specifically with the mmio API's. Does anyone have any ideas why this is happening and if there is a work-around to it? I suspect that I may end up having the temporary location on the local drive, but this is quite a big change to the application as well as existing deployments. thanks for everyones time Dean

    Read the article

  • Extract wrong data from a frame in C?

    - by ipkiss
    I am writing a program that reads the data from the serial port on Linux. The data are sent by another device with the following frame format: |start | Command | Data | CRC | End | |0x02 | 0x41 | (0-127 octets) | | 0x03| ---------------------------------------------------- The Data field contains 127 octets as shown and octet 1,2 contains one type of data; octet 3,4 contains another data. I need to get these data. Because in C, one byte can only holds one character and in the start field of the frame, it is 0x02 which means STX which is 3 characters. So, in order to test my program, On the sender side, I construct an array as the frame formatted above like: char frame[254]; frame[0] = 0x02; // starting field frame[1] = 0x41; // command field which is character 'A' ..so on.. And, then On the receiver side, I take out the fields like: char result[254]; // read data read(result); printf("command = %c", result[1]); // get the command field of the frame // get other field's values the command field value (result[1]) is not character 'A'. I think, this because the first field value of the frame is 0x02 (STX) occupying 3 first places in the array frame and leading to the wrong results on the receiver side. How can I correct the issue or am I doing something wrong at the sender side? Thanks all. related questions: http://stackoverflow.com/questions/2500567/parse-and-read-data-frame-in-c http://stackoverflow.com/questions/2531779/clear-data-at-serial-port-in-linux-in-c

    Read the article

  • Call child's method or cast parent to child in Rails

    - by Brian
    I have some STI structure like following: class Box has_many :part,:class_name = "Part" end class Part def self.dosomething() end end class TypeA class TypeB assuming we have some codes like boxtypeA = Box.new. I am wondering if there is a way to make boxtypeA.part.dosomething() to call TypeA's method not Part's or TypeB's. I think basically what we need to do is to convert the part to TypeA, how can we achieve that? Thx in advance!

    Read the article

  • Call child's method or cast parent to child in Rails

    - by Brian
    I have some STI structure like following: class Box has_many :part,:class_name = "Part" end class Part def self.dosomething() end end class TypeA<Part def self.dosomething() end end class TypeB<Part def self.dosomething() end end assuming we have some codes like boxtypeA = Box.new. I am wondering if there is a way to make boxtypeA.part.dosomething() to call TypeA's method not Part's or TypeB's. I think basically what we need to do is to convert the part to TypeA, how can we achieve that? Thx in advance!

    Read the article

  • Java Runtime command line Process

    - by AEIOU
    I have a class with the following code: Process process = null; try { process = Runtime.getRuntime().exec("gs -version"); System.out.println(process.toString()); } catch (Exception e1) { e1.printStackTrace(); } finally { process.destroy(); } I can run "gs -version" on my command line and get: GPL Ghostscript 8.71 (2010-02-10) Copyright (C) 2010 Artifex Software, Inc. All rights reserved. So I know I have the path at least set somewhere. I can run that class from command line and it works. But when I run it using eclipse I get the following error: java.io.IOException: Cannot run program "gs": error=2, No such file or directory at java.lang.ProcessBuilder.start(ProcessBuilder.java:459) at java.lang.Runtime.exec(Runtime.java:593) at java.lang.Runtime.exec(Runtime.java:431) at java.lang.Runtime.exec(Runtime.java:328) at clris.batchdownloader.TestJDBC.main(TestJDBC.java:17) Caused by: java.io.IOException: error=2, No such file or directory at java.lang.UNIXProcess.forkAndExec(Native Method) at java.lang.UNIXProcess.(UNIXProcess.java:53) at java.lang.ProcessImpl.start(ProcessImpl.java:91) at java.lang.ProcessBuilder.start(ProcessBuilder.java:452) ... 4 more In my program, i can replace "gs" with: "java", "mvn", "svn" and it works. But "gs" does not. It's only in eclipse I have this problem. Any ideas, on what I need to do to resolve this issue?

    Read the article

  • How to completely wipe a previous ClickOnce installation?

    - by Dabblernl
    I have a curious problem: My app is distributed through ClickOnce. I recently installed three new clients on a new location. They worked. After an update however, all old clients worked fine, but the three new clients did not. As my code is swallowing an exception somewhere I have been unable thusfar to pinpoint where the error lies. When I XCopy the latest version of the app to the desktop of the three new client computers the program works fine. So, I thought uninstalling and reinstalling the program from the download location should fix the problem, but it does not! I can think of two explanations: The new location has some firewall/virusscanner in place that doesn't like the latest version of my app when it is run from a standard ClickOnce directory, but it allows execution from the desktop. Some old settings (the app uses user scoped and app scoped settings) remain in effect after the uninstall. When I find and check the user.config file for the app however, I find no incorrect setttings there. Thusfar, I have been unable to reproduce the error on any other machine. How can I solve this!?

    Read the article

  • How to include CKeditor which is outside of your document root

    - by Asif
    Hi, Is it possible to use CKeditor which resides outside of your document root inside document root application? For e.g. I am having directory structure like: My Documentroot C://xampp/htdocs/example.com My CKeditor is outside and parallel to document root say C://xampp/lib/ckeditor How can I call ckeditor.js which is in C://xampp/lib/ckeditor/ckeditor in my application page in C://xampp/htdocs/example.com/editor.php

    Read the article

  • Override the Local module directory for cvs using Hudson

    - by Roberto
    Hi guys, I'm using Hudson and I need to change the checkout directory for cvs. Instead of checkout/update the project under the workspace dir, I'd like to specify a dir (as you can do for svn, changing the Local module directory conf) that will match the cvs tree structure. Eg. under cvs dir1/dir2/project on my box workspace/dir1/dir2/project is that possible with cvs and Hudson? Maybe there's a way to override the cvs call? Thanks! Roberto

    Read the article

  • How to prevent buffer overflow in C/C++?

    - by alexpov
    Hello, i am using the following code to redirect stdout to a pipe, then read all the data from the pipe to a buffer. I have 2 problems: first problem: when i send a string (after redirection) bigger then the pipe's BUFF_SIZE, the program stops responding (deadlock or something). second problem: when i try to read from a pipe before something was sent to stdout. I get the same response, the program stops responding - _read command stuck's ... The issue is that i don't know the amount of data that will be sent to the pipe after the redirection. The first problem, i don't know how to handle and i'll be glad for help. The second problem i solved by a simple workaround, right after the redirection i print space character to stdout. but i guess that this solution is not the correct one ... #include <fcntl.h> #include <io.h> #include <iostream> #define READ 0 #define WRITE 1 #define BUFF_SIZE 5 using namespace std; int main() { int stdout_pipe[2]; int saved_stdout; saved_stdout = _dup(_fileno(stdout)); // save stdout if(_pipe(stdout_pipe,BUFF_SIZE, O_TEXT) != 0 ) // make a pipe { exit(1); } fflush( stdout ); if(_dup2(stdout_pipe[1], _fileno(stdout)) != 0 ) //redirect stdout to the pipe { exit(1); } ios::sync_with_stdio(); setvbuf( stdout, NULL, _IONBF, 0 ); //anything sent to stdout goes now to the pipe //printf(" ");//workaround for the second problem printf("123456");//first problem char buffer[BUFF_SIZE] = {0}; int nOutRead = 0; nOutRead = _read(stdout_pipe[READ], buffer, BUFF_SIZE); //second problem buffer[nOutRead] = '\0'; // reconnect stdout if (_dup2(saved_stdout, _fileno(stdout)) != 0 ) { exit(1); } ios::sync_with_stdio(); printf("buffer: %s\n", buffer); } Thanks, Alex

    Read the article

  • how is google Calculator implemented ?

    - by AlgoMan
    When you search in Google "100F to C" how does it know to convert from Fahrenheit to Celsius. Similarly, conversion from different currencies and simple calculation. What is the data structure used. Or is it simple pattern matching the strings ?

    Read the article

  • objective-c Add to/Edit .plist file

    - by Dave
    Does writeToFile:atomically, add data to an existing .plist? Is it possible to modify a value in a .plist ? SHould the app be recompiled to take effect the change? I have a custom .plist list in my app. The structure is as below: <array> <dict> <key>Title</key> <string>MyTitle</string> <key>Measurement</key> <dict> <key>prop1</key> <real>28.86392</real> <key>prop2</key> <real>75.12451</real> </dict> <key>Distance</key> <dict> <key>prop3</key> <real>37.49229</real> <key>prop4</key> <real>58.64502</real> </dict> </dict> </array> The array tag holds multiple items with same structure. I need to add items to the existing .plist. Is that possible? I can write a UIView to do just that, if so. *EDIT - OK, I just tried to writetofile hoping it would atleast overwrite if not add to it. Strangely, the following code selects different path while reading and writing. NSString *rootPath = [NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES) objectAtIndex:0]; The .plist file is in my project. I can read from it. When I write to it, it is creating a .plist file and saving it in my /users/.../library/! Does this make sense to anyone?

    Read the article

  • How can I work around "Xcode could not locate source file"

    - by Septih
    Hello, I'm working with the ID3 framework in Xcode (which has since disappeared off the face of the web - including google cache!). I'm testing out an import mp3 feature which allows them to edit the tags as they import them. One of the test cases is a corrupt or invalid mp3 with no proper id3 header. The problem I'm having is that when updating the tags of the invalid mp3 (updateFile:), the ID3 framework attempts to use id3V1Tag.m (I assume it falls back to this if it can't find the v2 tag) and this is where I get the Xcode error (whilst running the program, not building): Xcode could not locate source file: id3V1Tag.m (line: 299) Even in a release build this crashes the program, so it's not something I can really ignore. I've tried putting a try/catch block around it but it's not treated as an exception so doesn't get caught. The function to load the tag data for the file returns a BOOL but it appears this only returns false if the given file doesn't exist, so this doesn't help either. Current code: [tagData release]; tagData = [[TagAPI alloc] initWithGenreList:nil]; tagsLoaded = [tagData examineFile:exportPath]; if(tagsLoaded) { [tagData setTitle:title]; [tagData setArtist:artist]; [tagData setComments:comments]; @try { [tagData updateFile]; } @catch (id e){ NSLog(@"h"); } }

    Read the article

  • Asymptotic complexity of a compiler

    - by Meinersbur
    What is the maximal acceptable asymptotic runtime of a general-purpose compiler? For clarification: The complexity of compilation process itself, not of the compiled program. Depending on the program size, for instance, the number of source code characters, statements, variables, procedures, basic blocks, intermediate language instructions, assembler instructions, or whatever. This is highly depending on your point of view, so this is a community wiki. See this from the view of someone who writes a compiler. Will the optimisation level -O4 ever be used for larger programs when one of its optimisations takes O(n^6)? Related questions: When is superoptimisation (exponential complexity or even incomputable) acceptable? What is acceptable for JITs? Does it have to be linear? What is the complexity of established compilers? GCC? VC? Intel? Java? C#? Turbo Pascal? LCC? LLVM? (Reference?) If you do not know what asymptotic complexity is: How long are you willing to wait until the compiler compiled your project? (scripting languages excluded)

    Read the article

  • What file format can represent an uncompressed raster image at 48 or 64 bits per pixel?

    - by finnw
    I am creating screenshots under Windows and using the LockBits function from GDI+ to extract the pixel data, which will then be written to a file. To maximise performance I am also: Using the same PixelFormat as the source bitmap, to avoid format conversion Using the ImageLockModeUserInputBuf flag to extract the pixel data into a pre-allocated buffer This pre-allocated buffer (pointed to by BitmapData::Scan0) is part of a memory-mapped file (to avoid copying the pixel data again.) I will also be writing the code that reads the file, so I can use (or invent) any format I wish. However I would prefer to use a well-known format that existing programs (ideally web browsers) are able to read, because that means I can visually confirm that the images are correct before writing the code for the other program (that reads the image.) I have implemented this successfully for the PixelFormat32bppRGB format, which matches the format of a 32bpp BMP file, so if I extract the pixel data directly into the memory-mapped BMP file and prefix it with a BMP header I get a valid BMP image file that can be opened in Paint and most browsers. Unfortunately one of the machines I am testing on returns pixels in PixelFormat64bppPARGB format (presumably this is influenced by the video adapter driver) and there is no corresponding BMP pixel format for this. Converting to a 16, 24 or 32bpp BMP format slows the program down considerably (as well as being lossy) so I am looking for a file format that can use this pixel format without conversion, so I can extract directly into the memory-mapped file as I have done with the 32bpp format. What raster image file formats support 48bpp and/or 64bpp?

    Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >