Search Results

Search found 21319 results on 853 pages for 'state management'.

Page 411/853 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

  • All paths down on vSphere esxi 5.1, LSI 9211-8i

    - by user1434058
    Works 100% ESXi 5.1 HBA (LSI 1064e) 1x SAS2 100GB SSD Doesn't work ESXi 5.1 HBA (LSI 9211-8i IT /IBM M1015) 1x SAS2 100GB SSD After a few hours of heavy HD load i get: - Device or filesystem with identifier ['all drives'] has entered the All Paths Down state. - ESXi retries but loses connectivity to the SAS drive, marks it as "dead or error" - reboot fixes the issue How can i fix this issue?

    Read the article

  • So you're a new sysadmin...

    - by 80bower
    I've recently taken over management of a Windows 2003 Small Business server and network for a small, less than ten person company. I have some (antiquated) sysadmin experience, but I've little experience with Exchange. The documentation of the existing infrastructure leaves much to be desired, and I was wondering if there's any sort of "So you've just become sysadmin" guides that anyone could recommend.

    Read the article

  • Failed MDADM Array With Ext.4 Partition - "e2fsck: unable to set superblock flags on /dev/md0"

    - by Matthew Hodgkins
    Had a power failure and now my mdadm array is having problems. sudo mdadm -D /dev/md0 [hodge@hodge-fs ~]$ sudo mdadm -D /dev/md0 /dev/md0: Version : 0.90 Creation Time : Sun Apr 25 01:39:25 2010 Raid Level : raid5 Array Size : 8790815232 (8383.57 GiB 9001.79 GB) Used Dev Size : 1465135872 (1397.26 GiB 1500.30 GB) Raid Devices : 7 Total Devices : 7 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Sat Aug 7 19:10:28 2010 State : clean, degraded, recovering Active Devices : 6 Working Devices : 7 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 128K Rebuild Status : 10% complete UUID : 44a8f730:b9bea6ea:3a28392c:12b22235 (local to host hodge-fs) Events : 0.1307608 Number Major Minor RaidDevice State 0 8 81 0 active sync /dev/sdf1 1 8 97 1 active sync /dev/sdg1 2 8 113 2 active sync /dev/sdh1 3 8 65 3 active sync /dev/sde1 4 8 49 4 active sync /dev/sdd1 7 8 33 5 spare rebuilding /dev/sdc1 6 8 16 6 active sync /dev/sdb sudo mount -a [hodge@hodge-fs ~]$ sudo mount -a mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so sudo fsck.ext4 /dev/md0 [hodge@hodge-fs ~]$ sudo fsck.ext4 /dev/md0 e2fsck 1.41.12 (17-May-2010) fsck.ext4: Group descriptors look bad... trying backup blocks... /dev/md0: recovering journal fsck.ext4: unable to set superblock flags on /dev/md0 sudo dumpe2fs /dev/md0 | grep -i superblock [hodge@hodge-fs ~]$ sudo dumpe2fs /dev/md0 | grep -i superblock dumpe2fs 1.41.12 (17-May-2010) Primary superblock at 0, Group descriptors at 1-524 Backup superblock at 32768, Group descriptors at 32769-33292 Backup superblock at 98304, Group descriptors at 98305-98828 Backup superblock at 163840, Group descriptors at 163841-164364 Backup superblock at 229376, Group descriptors at 229377-229900 Backup superblock at 294912, Group descriptors at 294913-295436 Backup superblock at 819200, Group descriptors at 819201-819724 Backup superblock at 884736, Group descriptors at 884737-885260 Backup superblock at 1605632, Group descriptors at 1605633-1606156 Backup superblock at 2654208, Group descriptors at 2654209-2654732 Backup superblock at 4096000, Group descriptors at 4096001-4096524 Backup superblock at 7962624, Group descriptors at 7962625-7963148 Backup superblock at 11239424, Group descriptors at 11239425-11239948 Backup superblock at 20480000, Group descriptors at 20480001-20480524 Backup superblock at 23887872, Group descriptors at 23887873-23888396 Backup superblock at 71663616, Group descriptors at 71663617-71664140 Backup superblock at 78675968, Group descriptors at 78675969-78676492 Backup superblock at 102400000, Group descriptors at 102400001-102400524 Backup superblock at 214990848, Group descriptors at 214990849-214991372 Backup superblock at 512000000, Group descriptors at 512000001-512000524 Backup superblock at 550731776, Group descriptors at 550731777-550732300 Backup superblock at 644972544, Group descriptors at 644972545-644973068 Backup superblock at 1934917632, Group descriptors at 1934917633-1934918156 sudo e2fsck -b 32768 /dev/md0 [hodge@hodge-fs ~]$ sudo e2fsck -b 32768 /dev/md0 e2fsck 1.41.12 (17-May-2010) /dev/md0: recovering journal e2fsck: unable to set superblock flags on /dev/md0 sudo dmesg | tail [hodge@hodge-fs ~]$ sudo dmesg | tail EXT4-fs (md0): ext4_check_descriptors: Checksum for group 0 failed (59837!=29115) EXT4-fs (md0): group descriptors corrupted! EXT4-fs (md0): ext4_check_descriptors: Checksum for group 0 failed (59837!=29115) EXT4-fs (md0): group descriptors corrupted! Please Help!!!

    Read the article

  • How to manage Media Center Extender schedule from Media Center in Windows7

    - by Pangea
    I want to have several machines set up as digital signage displays and pull media (.pptx, video, images etc) from a centralized place. This is easy enough, but what I really need help doing is managing which extenders play specific media and the schedule from a Windows 7 x64 client hopefully within Media Center but I'm open to another management app. Is it possible to dictate the time and location each media is pushed to? I can use either a full machine running a full Win7 OS or a simple MC extender.

    Read the article

  • Magic Mouse and Alum keyboard autosleep?

    - by Moshe
    How does the power management of the wireless keyboard and magic mouse work with iMac? (late 2009) Do I need to manually power off the keyboard and mouse when I shut off my Mac or do they power off/sleep automatically? ( BONUS: How often should the batteries be replaced? )

    Read the article

  • Ubuntu/Windows suddenly freezes

    - by tapan
    I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

    Read the article

  • Error trying to get tmux 1.6 installed - E: Unable to locate package libevent

    - by Michael Durrant
    $ pwd $ /home/durrantm/Downloads/tmux-1.6 durrantm.../tmux-1.6$ ./configure && make checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes ... ... configure: error: "libevent not found" durrantm.../tmux-1.6$ sudo apt-get install libevent Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libevent

    Read the article

  • Attach radeon driver to specific PCI devices?

    - by genpfault
    I have two Radeon cards in this machine, a 6570 and a 6950: lspci | grep VGA: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Turks [Radeon HD 6570] 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] I'm trying to get VGA passthrough to work with KVM on Debian Wheezy, passing through the 6950 as a secondary video card to a Windows 7 guest. This works fine if I blacklist the radeon kernel module via /etc/modprobe.d/. If I remove the blacklist to run X11 (or even just a KMS console) on the 6570 the radeon module seems to attach to both cards: dmesg | egrep "01:00.0|02:00.0|radeon": pci 0000:01:00.0: [1002:6759] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:02:00.0: [1002:6719] type 0 class 0x000300 pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 18: [mem 0xf7d20000-0xf7d3ffff 64bit] pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff] pci 0000:02:00.0: reg 30: [mem 0xf7d00000-0xf7d1ffff pref] pci 0000:02:00.0: supports D1 D2 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none vgaarb: bridge control possible 0000:02:00.0 vgaarb: bridge control possible 0000:01:00.0 pci 0000:01:00.0: Boot video device [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: setting latency timer to 64 radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:01:00.0: irq 46 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:01:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fbcon: radeondrmfb (fb0) is primary device fb0: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 radeon 0000:02:00.0: enabling device (0000 -> 0003) radeon 0000:02:00.0: setting latency timer to 64 radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) radeon 0000:02:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [drm] radeon: 2048M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:02:00.0: irq 49 for MSI/MSI-X radeon 0000:02:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:02:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fb1: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 1 [drm] radeon: finishing device. radeon 0000:02:00.0: ffff88041a941800 unpin not necessary [drm] radeon: ttm finalized pci-stub 0000:02:00.0: claimed by stub pci-stub 0000:02:00.0: irq 49 for MSI/MSI-X This causes the Win7 VM to bluescreen on boot. How can I configure things so that the radeon module only attaches to the 6570 and not the 6950?

    Read the article

  • Visualization Tools for Networks that Change with Time

    - by devin
    Does anyone known of any good Linux tools for visualizing networks that change (quickly) with time. I'm interested in things like: Routes between nodes Delays between nodes (especially as they change with time) Throughput I have root access to all the nodes (so I can run daemons on them all). Also, assume that I either have a management network that is stable or I will collect data and then analyze it offline.

    Read the article

  • Adding Hyper-V Role Errors

    - by Brian
    Hello, I have a Win 2008 R2 Data Center machine, and when I added the Hyper-V role, I got the following errors: 'Hypervisor' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role. Hyper-V launch failed; Either VMX not present or not enabled in BIOS. ANy help would be appreciated as I am a n00b to the server world. Thanks.

    Read the article

  • What is the difference between safety and security?

    - by Lernkurve
    Question What is the difference between safety and security in the context of information management or computer science? Elaboration This could be the canonical answer for people searching for it. Let me know if superuser.com is the wrong site for this question. I have, of course, googled it and haven't found an answer that seemed short and to the point. Wikipedia wasn't very helpful either: safety, information security.

    Read the article

  • Database Mirroring of SQL server

    - by jbp117
    I have two databases that are mirrored to another server using database mirroring. The mirror server has to be down for some reason for few days. Now the production server is having principal databases in (PRINCIPAL/DISCONNECTED) State. Clients can access those databases. So what happens when they keep on adding data to these databases?? Will the data get committed or waits till the mirror comes up?

    Read the article

  • How to format as FAT32 from Windows 7/Vista

    - by Jack Ukleja
    What is the best way to format a USB drive with FAT32 (for Mac compatibility) from within Windows 7/Vista? I ask because the Disk Management only lets you pick exFAT (because the disk is over 32GB I believe). Doing it from the command line with diskpart doesn't seem to work either.

    Read the article

  • Dual Monitors don't wake up...

    - by serhio
    Recently I put my second monitor on my computer. I have now two connections on my ATI graphic card: a VGA and newly added a DVI one. like this: Sine that, I need to start my computer with monitors powered ON, because if I do it after, thay does not "get up" and says that is "no video entry". Also, if I switch OFF my monitors when computer works, switching ON lets them in the sleep state... How can I fix this issue.

    Read the article

  • Windows 7 detects my 1 TB disk as a disk with only 31 MB space

    - by ZelluX
    I've added another 1 TB Western Digital disk on my computer (there is a disk with 250 GB already), and after booting to Windows 7, it recognise the disk, but in the Disk Management panel, it says the disk has only 31 MB TOTAL space, so is what it shows in the EVEREST information. And when I rebooted the computer and entered BIOS, it said the new disk has 0 MB disk capacity. Is there any way to fix this problem?

    Read the article

  • How to connect SAN from CentOS through two iSCSI Targets

    - by garconcn
    I had asked the similar question before. This time I want to use subnet for two iSCSI Targets, hence I start a new question. I have an old Promise VTrak M500i SAN Server. It comes with 2 iSCSI ports. I want to connect to two LUNs on the SAN server through two separate Targets from CentOS 5.7 64bits server. My network setup is as follows: CentOS server: Management network - 192.168.1.1 Storage network 1 - 192.168.5.2 Storage network 2 - 192.168.6.2 Promise SAN server: Management network - 192.168.1.2 iSCSI Port 1 - 192.168.5.1 iSCSI Port 2 - 192.168.6.1 I have two Logical Drives on this SAN and they are mapped as follows: Index Initiator Name LUN Mapping 0 iqn.2011-11:backup (LD0,0) 1 iqn.2011-11:template (LD1,1) Basically, I want the traffic to iqn.2011-11:backup LUN 0 through 192.168.5.1 network the traffic to iqn.2011-11:template LUN 1 through 192.168.6.1 network I don't use MPIO, just want to separate the traffic to avoid traffic jam. How do I achieve this? I am new to SAN stuff, please explain as much detail as you can. Thank you. The following are what I am doing now. After mapping the LUN to my pre-defined Initiators, the CentOS server can discover both Targets. [root@centos ~]# iscsiadm -m discovery -t sendtargets -p 192.168.5.1 192.168.5.1:3260,1 iscsi-1 192.168.6.1:3260,2 iscsi-1 [root@centos ~]# iscsiadm -m discovery -t sendtargets -p 192.168.6.1 192.168.6.1:3260,2 iscsi-1 192.168.5.1:3260,1 iscsi-1 [root@centos ~]# /etc/init.d/iscsi start iscsid is stopped Starting iSCSI daemon: [ OK ] [ OK ] Setting up iSCSI targets: Logging in to [iface: default, target: iscsi-1, portal: 192.168.6.1,3260] Logging in to [iface: default, target: iscsi-1, portal: 192.168.5.1,3260] Login to [iface: default, target: iscsi-1, portal: 192.168.6.1,3260] successful. Login to [iface: default, target: iscsi-1, portal: 192.168.5.1,3260] successful. [ OK ] [root@centos ~]# iscsiadm -m session tcp: [1] 192.168.6.1:3260,2 iscsi-1 tcp: [2] 192.168.5.1:3260,1 iscsi-1 When I check the LUN mapping on the SAN server for the two Logical Drives, both LUNs are connected through Port0-192.168.5.2 with the Initiator defined in CentOS. Assigned Initiator List: Initiator Name Alias IP Address LUN iqn.2011-11.centos centos.mydomain.com Port0-192.168.5.2 0 Initiator Name Alias IP Address LUN iqn.2011-11.centos centos.mydomain.com Port1-192.168.5.2 1 I assume the following is what I want: Initiator Name Alias IP Address LUN iqn.2011-11.backup centos.mydomain.com Port0-192.168.5.2 0 Initiator Name Alias IP Address LUN iqn.2011-11.template centos.mydomain.com Port0-192.168.6.2 1

    Read the article

  • Logitech Media Elite Func button

    - by Noam Gal
    I have the aforementioned keyboard, and occasionally the "Func" key will get unpressed. It gets especially annoying when I try to rename a file, and start winword by accident, or try to refresh a page, and nothing happens (It's the undo - no effect inside a browser usually). I know I can rebind those keys to just do nothing, but I just wanted to know why does the func mode changes by itself? Can it be something with power management/screen saver?

    Read the article

  • MariaDB doesn't upgrade, 2 versions are installed

    - by zahorak
    I have a server running on Debian wheezy with MaraiDB and OwnCloud. Few days ago, I wanted to update the packages because of the OwnCloud updates but something went wrong. Usually in this case I'd probably try to remove and again install the problematic packages, but on a server which is used by different people it doesn't seem like a valid solution anymore. Here you can see my console output: user@server:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libmariadbclient18 : Depends: libmysqlclient18 (= 10.0.4+maria-1~wheezy) but 10.0.5+maria-1~wheezy is installed libmysqlclient18 : Depends: libmariadbclient18 (= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-client-10.0 : Depends: libmariadbclient18 (>= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-client-core-10.0 : Depends: libmariadbclient18 (>= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-server : Depends: mariadb-server-10.0 (= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-server-core-10.0 : Depends: libmariadbclient18 (>= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed E: Unmet dependencies. Try using -f. user@server:~$ sudo apt-get upgrade -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages will be upgraded: libmariadbclient18 mariadb-server-10.0 owncloud 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 7 not fully installed or removed. Need to get 0 B/37.2 MB of archives. After this operation, 3,565 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Preconfiguring packages ... (Reading database ... 35901 files and directories currently installed.) Preparing to replace libmariadbclient18 10.0.4+maria-1~wheezy (using .../libmariadbclient18_10.0.5+maria-1~wheezy_amd64.deb) ... Unpacking replacement libmariadbclient18 ... dpkg: error processing /var/cache/apt/archives/libmariadbclient18_10.0.5+maria-1~wheezy_amd64.deb (--unpack): trying to overwrite '/usr/lib/mysql/plugin/dialog.so', which is also in package mariadb-server-10.0 10.0.4+maria-1~wheezy Errors were encountered while processing: /var/cache/apt/archives/libmariadbclient18_10.0.5+maria-1~wheezy_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I tried removing the 10.0.4 package version of libmariadbclient18 but I wasn't really successful in doing that. So my last hope is here, do you have any ideas how exactly I could fix this issue? Thx very much

    Read the article

  • Can I monitor a service's memory/cpu usage on OpenSolaris?

    - by Phillip Oldham
    What would be the best way to monitor a service's memory/load on the OpenSolaris platform so that one can send alerts and automate service management (restarts, etc) based on "rules"? On the linux platform I use Monit, but since OpenSolaris has SMF I thought there may be a complimentary service "built-in" if SMF doesn't have those features and I'd prefer to use a standard OpenSolaris app if there is one.

    Read the article

  • why does Virtualbox use 15-20% CPU when VM is paused?

    - by laramichaels
    Hello, I run VirtualBox 3.1 on Ubuntu with a Win XP guest. I have noticed to my surprise that when I pause the VM (its screen grays out) VirtualBox continues using 15-20% of the host's CPU. Is this normal behavior? Is there a way to avoid it? (Without saving the state of the VM and exiting VirtualBox.) Thanks for any insights! ~lara

    Read the article

  • High quality / high speed dvd reader for Mac Pro

    - by deadprogrammer
    I have a high end Mac pro, but one thing in is that I'm unhappy with is a DVD drive. It's a Hitachi GH41N. Apple calls it a "superdrive", but it's anything but. The damn thing makes an amazing amount of noise, and isn't too fast either. What I want is a state of the art, fast, quiet DVD reader, preferably not even a burner. What should I get?

    Read the article

  • Windows 7 SP1 not being offered on Windows Update

    - by Ian Boyd
    i have no option to install Windows 7 Service Pack 1 (SP1) on my computer. Why is the option to install Windows 7 SP1 missing from Windows Update? i'm less interested in why the option is missing, and more interested in how to diagnose why the option to install Windows 7 SP1 is being hidden. Following the suggestions in KB2498452 - You do not have the option of downloading Windows 7 SP1 when you use Windows Update to check for updates: Confirm that Windows 7 SP1 is not already installed and that you are not running a prerelease version of Windows 7 SP1 i am not already running SP1, or a pre-release SP1: Check for pending updates Update 976902 may have to be installed on your computer before Windows 7 SP1 will be offered in Windows Update. i already have 976902 installed: Verify that an incompatible version of SafeCentral is not installed on your computer Windows SP1 may not appear in Windows Update if certain versions of SafeCentral are installed on your computer. SafeCentral is a security program that is manufactured by SafeCentral, Inc. i do not have SafeCentral installed (i've never heard of such a thing): Check whether you have Intel integrated graphics driver Igdkmd32.sys or Igdkmd64.sys and whether you upgraded the driver i do not have an Intel GMA: Make sure that you did not use vLite to customize your Windows 7 installation i did not use vLite to customize my Windows 7 installation. Again, i've never heard of such a thing. Update One: Here's proof that i've checked for updates "today" (3/2/2011): And that i'm not being presented the option of installing SP1 (i dispatched an update to Silverlight and a fix for IE9 being hosted in a Direct2D or Direct3D application; so updates themselves do work): Update Two Tried the Windows Update Troubleshooter: Window 7 Service Pack 1 is still not available. Update Three Here is the tail end of windowsupdate.log. It speaks of Evaluating application rules: Found 2 updates and 65 categories in search; evaluated appl. rules of 1324 out of 1832 deployed entities These must be the rules that say i'm not allowed to see SP1: 2011-03-03 09:21:08:091 924 db4 AU Triggering AU detection through DetectNow API 2011-03-03 09:21:08:091 924 db4 AU Triggering Online detection (interactive) 2011-03-03 09:21:08:091 924 950 AU ############# 2011-03-03 09:21:08:092 924 950 AU ## START ## AU: Search for updates 2011-03-03 09:21:08:092 924 950 AU ######### 2011-03-03 09:21:08:093 924 950 AU <<## SUBMITTED ## AU: Search for updates [CallId = {8517376A-B8A3-488B-B4D4-67DFC75788C8}] 2011-03-03 09:21:08:093 924 ca8 Agent ************* 2011-03-03 09:21:08:093 924 ca8 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2011-03-03 09:21:08:093 924 ca8 Agent ********* 2011-03-03 09:21:08:093 924 ca8 Agent * Online = Yes; Ignore download priority = No 2011-03-03 09:21:08:093 924 ca8 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2011-03-03 09:21:08:093 924 ca8 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service 2011-03-03 09:21:08:093 924 ca8 Agent * Search Scope = {Machine} 2011-03-03 09:21:08:094 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2011-03-03 09:21:08:097 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:287 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2011-03-03 09:21:08:289 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:292 924 ca8 Agent Checking for updated auth cab for service 7971f918-a847-4430-9279-4a52d1efe18d at http://download.windowsupdate.com/v9/microsoftupdate/redir/muauth.cab 2011-03-03 09:21:08:292 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab: 2011-03-03 09:21:08:294 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:354 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab: 2011-03-03 09:21:08:356 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:356 924 ca8 Setup Checking for agent SelfUpdate 2011-03-03 09:21:08:356 924 ca8 Setup Client version: Core: 7.3.7600.16385 Aux: 7.3.7600.16385 2011-03-03 09:21:08:357 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2011-03-03 09:21:08:359 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:418 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2011-03-03 09:21:08:420 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:422 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab: 2011-03-03 09:21:08:424 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:655 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab: 2011-03-03 09:21:08:658 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:659 924 ca8 Setup Skipping SelfUpdate check based on the /SKIP directive in wuident 2011-03-03 09:21:08:659 924 ca8 Setup SelfUpdate check completed. SelfUpdate is NOT required. 2011-03-03 09:21:08:808 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2011-03-03 09:21:08:810 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:872 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2011-03-03 09:21:08:874 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:08:876 924 ca8 PT +++++++++++ PT: Synchronizing server updates +++++++++++ 2011-03-03 09:21:08:877 924 ca8 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2011-03-03 09:21:13:958 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2011-03-03 09:21:13:960 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:14:083 924 ca8 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2011-03-03 09:21:14:085 924 ca8 Misc Microsoft signed: Yes 2011-03-03 09:21:14:087 924 ca8 PT +++++++++++ PT: Synchronizing extended update info +++++++++++ 2011-03-03 09:21:14:087 924 ca8 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2011-03-03 09:21:14:395 924 ca8 Agent * Added update {414642E2-5F20-4AD1-AA5A-773061238B5F}.101 to search result 2011-03-03 09:21:14:395 924 ca8 Agent * Added update {56D5FC3D-9AC8-44F1-A248-8C397A24D02F}.100 to search result 2011-03-03 09:21:14:395 924 ca8 Agent * Found 2 updates and 65 categories in search; evaluated appl. rules of 1324 out of 1832 deployed entities 2011-03-03 09:21:14:396 924 ca8 Agent ********* 2011-03-03 09:21:14:396 924 ca8 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates] 2011-03-03 09:21:14:396 924 ca8 Agent ************* 2011-03-03 09:21:14:404 924 ce0 AU >>## RESUMED ## AU: Search for updates [CallId = {8517376A-B8A3-488B-B4D4-67DFC75788C8}] 2011-03-03 09:21:14:404 924 ce0 AU # 2 updates detected 2011-03-03 09:21:14:404 924 ce0 AU ######### 2011-03-03 09:21:14:404 924 ce0 AU ## END ## AU: Search for updates [CallId = {8517376A-B8A3-488B-B4D4-67DFC75788C8}] 2011-03-03 09:21:14:404 924 ce0 AU ############# 2011-03-03 09:21:14:404 924 ce0 AU Successfully wrote event for AU health state:0 2011-03-03 09:21:14:405 924 ce0 AU ############# 2011-03-03 09:21:14:405 924 ce0 AU ## START ## AU: Refresh featured updates info 2011-03-03 09:21:14:405 924 ce0 AU ######### 2011-03-03 09:21:14:405 924 ce0 AU No featured updates available. 2011-03-03 09:21:14:405 924 ce0 AU ######### 2011-03-03 09:21:14:405 924 ce0 AU ## END ## AU: Refresh featured updates info 2011-03-03 09:21:14:405 924 ce0 AU ############# 2011-03-03 09:21:14:405 924 ce0 AU No featured updates notifications to show 2011-03-03 09:21:14:405 924 ce0 AU AU setting next detection timeout to 2011-03-04 08:03:53 2011-03-03 09:21:14:405 924 ce0 AU Setting AU scheduled install time to 2011-03-04 08:00:00 2011-03-03 09:21:14:405 924 ce0 AU Successfully wrote event for AU health state:0 2011-03-03 09:21:14:406 924 ce0 AU Successfully wrote event for AU health state:0 2011-03-03 09:21:14:407 924 db4 AU Getting featured update notifications. fIncludeDismissed = true 2011-03-03 09:21:14:408 924 db4 AU No featured updates available. 2011-03-03 09:21:19:396 924 ca8 Report REPORT EVENT: {633538B3-030E-4CAD-BE6B-33C6ED65AFF1} 2011-03-03 09:21:14:395-0500 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 2 updates. 2011-03-03 09:21:19:396 924 ca8 Report CWERReporter finishing event handling. (00000000) i'm less interested in why the option to install Windows 7 SP1 is missing, and more interested in how to diagnose why the option to install Windows 7 SP1 is being hidden. The KB article says that SP1 will not be offered if your machine doesn't meet some secret special criteria. How can i discover what that secret criteria is? i presume it is logged somewhere. Nor am i particularly interested in a direct download link. i want to learn here. i want to be able to diagnose (i.e. in the future) why an update is not being offered. i'm a superuser here. Rather than others coming up with a checklist of things to try, i want to be able to come up with the checklist.

    Read the article

  • "Hide from exchange address lists" not working in Exchange 2007

    - by Abdullah
    Hiding a user by checking the "hide from exchange address lists" from exchange management console is not working. The user still shows up in GAL. When I ran Get-Mailbox -Identity _user_ | FL I got HiddenFromAddressListsEnabled : True So the check-box is working but the user still shows up. It's been over 3 weeks since hiding the user so it's not a time issue. This is what I have tried: Using Outlook in online mode Using OWA Regenerating GAL Un-checking then re-checking the "hide" check-box

    Read the article

  • missing files after reassemble of RAID-5

    - by Kris_R
    I had to open my file-server's housing on Sunday to replace a faulty fan. What I didn't see was that one of the sata-cables was not properly connected. The 1st thing I did after a reboot was a check of the RAID status and it showed immediately that one drive is missing. Till this moment the device was not used (however it was mounted, so I'm not 100% sure that system did nothing). I stopped md0 and re-plugged the cable: mdadm --stop /dev/md0 poweroff After another reboot I checked the removed drive: mdadm --examine /dev/sdd1 ... Checksum : 3276bc1d - correct Events : 315782 Layout : left-symmetric Chunk Size : 32K Number Major Minor RaidDevice State this 0 8 49 0 active sync /dev/sdd1 0 0 8 49 0 active sync /dev/sdd1 1 1 8 65 1 active sync /dev/sde1 2 2 8 33 2 active sync /dev/sdc1 3 3 8 17 3 active sync /dev/sdb1 I was a bit surprised that it was shown as active (even if earlier mdadm said, that this device was removed from array) and its checksum was OK. I recreated RAID with: mdadm --assemble /dev/md0 --scan The command mdadm --detail /dev/md0 showed that all drives were running and system was in "clean" state. I mounted the device md0 and then came hic-cup. I wanted to work on one of the last files that I had been using before all the situation and it was not there. In another place I missed actually all files from the directory where I was working. As far as I can see most of the files that are older than a few days are intact but some newer ones are missing. Now the big question: what would be your advice? Is there a way to get these data? I thought about removing the drive that was earlier labeled by mdadm and rebuild array with another empty HDD. I've found that after re-assemble the "broken" drive has another label (changed from sdd to sdb). Can this have influence on rebuilt process? If yes, how to reassemble the array properly? I'm sure the SATA-cables are connected still in the same order to the controller. p.s. Please no advises like "restore from backup". I'm doing back-ups on Sunday's night and this happened in the late afternoon, so backup is not really options for me. p.s.s. I asked this question on Unix&Linux but no answer came up during last two days. I'm getting quite anxious. Sorry for duplicating if any of you reading the other forum.

    Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >