Search Results

Search found 16894 results on 676 pages for 'block device'.

Page 412/676 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by user10321

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• Change Linux console screen blanking behavior

  - by quack quixote

  How do I change the screen blanking behavior on Linux virtual terminals? For example, if I switch to a VT from X, login, and leave the system alone for 5 minutes or so, the screen will blank like a screensaver. It comes back with any keypress, like a screensaver. Mostly I just want to change the timeout, but I'm also interested in other settings. If it helps, one of my systems is running Ubuntu 10.04 with the stock graphics drivers. fbset shows the console using the radeondrmfb framebuffer device.

  Read the article

• Scripted printer configuration changes

  - by David Steven

  I've got about a dozen Windows XP machines that I need to make a couple specific printer configuration changes to. The printer is "virtual" printer for an electronic delivery service. I'd like to not have to visit each machine individually. I already have the means to execute commands remotely on the machines, I just can't seem to find away to adjust these settings via command line or script. Specifically I need to be able to make the following changes: 1) As an admin user: - Device Settings - Font Substitution Table/Courier New - Change to "Courier" 2) As a specific* user: - Printer Preferences - Paper/Quality - Advanced - Change Graphic/Print Quality to "600 x 600" - Change Document Options/Printer Features/Graphics Mode to "HP-GL/2" *This change is a per user configuration, unless there's some way to make it once. In this situation I only really need it for a specific (different) user on each machine.

  Read the article

• NTFS Error - file system structure is corrupt and unusable

  - by SomeGuy

  My Windows 7 (64) keeps completely locking up, and I have to hold the power button to shit it down. Event logs are showing EventID 55. I realize that this can be a warning sign of an impending disk failure, but my data on this machine is safely backed up and I don't feel like taking the time to replace the drive right now. When I have seen this problem before, I have been able to delete the offending folder with a Linux Live CD. (When CHKDSK /F didn't work). In this case, the folder is from VSS. I assume this is from Crashplan, my online backup provider. What are the ramifications of deleting this folder from Linux? Is it safe to do? "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolumeShadowCopy26."

  Read the article

• How to play from mic to speakers in Ubuntu Karmic?

  - by vava

  Ok, I have a silly problem. I have few bluetooth headsets lying around and I want to make DYI baby monitor out of them. All I need is for some application to listen to the mic and send it to the speakers. Loopback (even though it doesn't work) is not good enough, it'll send sound from the mic to the speakers in the same device but I need it to go across devices. So does anyone know some application that can do that? I'm looking for something small and easy to use, not jackd or similar.

  Read the article

• Snort [PFSense] is configured but not blocking or generating alerts!

  - by Chase Florell

  I've got PFSense V 2.0-RC1 (i386) and I've got the latest version of Snort installed I've loaded up a bunch of rules from Oinkmaster, I've enabled all of the preprocessors, and I've ensured the service is started. When I let it sit for a while and then check my Alerts and Block list, there are no entries. Even when I test it by logging into Skype (skype is listed as a Rule from P2P), I don't get any entries in the logs. If you need any further information, please let me know... I simply can't figure this one out.

  Read the article

• Solution to wirelessly project tablet desktop?

  - by Robert

  I’m trying to find a device that would allow a windows 7 client to wirelessly connect and display their screen to a projector while still connected to the wireless network. The idea is to allow a professor to still project and display content while walking around the room with their tablet. To date, haven’t been able to find a solution that meets the requirements, has anyone stumbled across one yet? Requirements Must support Windows 7 Must be able to connect to WPA2 Personal(and hopefully enterprise) Must not use any usb dongles – those get lost/damaged given a chance. Goal Wirelessly display screen to projector without cables from tablet/laptop.

  Read the article

• Indentation-based Folding for TextMate

  - by Craig Walker

  SASS and HAML have indentation-based syntax, much like Python. Blocks of related code have the same number of spaces at the start of a line. Here's some example code: #drawer height: 100% color: #c2c7c4 font: size: 10px .slider overflow: hidden height: 100% .edge background: url('/images/foo') repeat-y .tab margin-top = !drawer_top width: 56px height: 161px display: block I'm using phuibonhoa's SASS bundle, and I'd like to enhance it so that the various sections can fold. For instance, I'd like to fold everything under #drawer, everything under .slider, everything under .edge, etc. The bundle currently includes the following folding code: foldingStartMarker = '/\*|^#|^\*|^\b|^\.'; foldingStopMarker = '\*/|^\s*$'; How can I enhance this to fold similarly-indented blocks?

  Read the article

• Conditional blocks of code in linux bash

  - by Arek

  Nearly everybody knows very useful && and || operators, for example: rm myf && echo "File is removed successfully" || echo "File is not removed" I've got a question: how to put a block of commands after && or || operators without using the function? For example I want to do: rm myf && \ echo "File is removed successfully" \ echo "another command executed when rm was successful" || \ echo "File is not removed" \ echo "another command executed when rm was NOT successful" What is the proper syntax of that script?

  Read the article

• How do I make my Boot Camp partition bootable again?

  - by Dan Herbert

  I needed to resize my Boot Camp partition so I used Gparted to move and resize it. This seemed to work, except that now I can't boot into Windows. I can boot into OS X just fine. OS X can recognize the Boot Camp partition and view its contents. When I try to reboot into Windows, however I get the message: No bootable device -- insert boot disk and press any key The only solutions I've been able to find online suggest that the only way to fix this is to either clone the drive or remove the Windows partition and re-install it. Is there any way to fix my Windows partition so that I don't have to reinstall Windows again?

  Read the article

• Run Wave Trusted Drive Manager from a bootable CD, recover crashed enrypted SSD?

  - by TigerInCanada

  Is there a way to run Wave Trusted Drive Manager from a live-cd to access a non-bootable SSD with Full Disk Encyption hard disk? http://www.wave.com/products/tdm.asp The crashed disk is a Samsung SSD PB22-JS3, 128Gb. Is has bad blocks at 128-block intervals. If the SSD password could be unset, is sending the unit for disaster recovery possible? What might cause a nearly new SSD to crash in this way, and what is the probability of it happening again? We have other units in service an I can do without every laptop disk in the company crashing...

  Read the article

• Software that supports ATA Secure Erase Command

  - by vy32

  We have a lot of drives that need to be sanitized. NIST SP 800-88 recommends software that uses the ATA Secure Erase command. That's apparently the only way to be sure that the drive is properly wiped, due to bad-block remapping and such. I know that this functionality is available in hdparm. The problem with that approach is that it is inconsistent on multiple platforms, occasionally times out, doesn't have error-checking logic, and doesn't check the resulting drive to make sure that it has, in fact, been erased. So a proper program might use hdparm, but hdparm by itself isn't an answer. I'm looking for open source software that implements ATA Secure Erase. Ideally it will be a bootable disk image like DBAN, but it will use the ATA command.

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• OpenVPN Setup - Service Won't Start

  - by Lenwood

  I'm in the process of setting up OpenVPN on a VPS running Debian 6. I've walked step-by-step through this guide twice now, and I can't get the service to start. When I start the service, the error reported in the log file is: Cannot ioctl TUNSETIFF tun: Inappropriate ioctl for device (errno=25) I've searched the web a few times and I'm not finding anything helpful. I've tried: Changing file permissions: no change Deleting the file: get an error stating no file found (errno=2) Making a folder named "tun": get an error stating no file found (errno=2) I've wiped my installation and completed the steps verbatim twice now. I get no errors along the way, just the error above within my log file. The contents of my server.conf file are listed below, minus all the comments for brevity. Can anyone help? port 1194 proto udp dev tun ca ca.crt cert myserver.crt key myserver.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log log openvpn.log verb 3

  Read the article

• Windows - Force Wi-Fi to N mode

  - by Frederick Marcoux

  I bought a month ago the D-Link DWA-160 Xtreme N Dual Band USB Adapter and I wonder about the speed. I have a 60Mbps but the speed is never above 300Kbps when I browse Internet or download something. Even from Microsoft or Apple (the fastest server I found). Now on Windows 8, we can see the Wi-Fi stats in Task Manager, there they are: Notice the red rectangle. The signal is 3/5 and I'm about 5 meters far from my router. An Apple Time-Capsule. Also, the connection type is 802.11g, I want N. I made this config in my Device Properties: Does anyone figured out to force the 802.11n in Windows? (Windows 8 preferably)

  Read the article

• How to prevent Spell checking code in MS Office?

  - by Aaron

  We use MS Office. Outlook for emails, Word for some documentation and I use OneNote a lot for my own note taking. What bugs me is when I drop some code or use key words or even camel case into these apps the spell checking picks them up and I have red squiggles everywhere. Ignore is pretty much useless, so either I have to turn off Spell Check altogether start adding these to the custom dictionary. What would be good is if I can use the Set Language function to mark a whole block of text to just not be spell checked. Has anyone found a nice solution to this or do you know of a blank dictionary is best to use? I found using "Mohawk" kind of does that... might just use that for now. Maybe create a macro to switch between them.

  Read the article

• USB Virtual RAM is not working properly

  - by Haseeb Anwar

  This images are help u in solving my question.1I have installed Windows 7 64 bit. I have made a virtual USB RAM but it is not working properly. First I go to the USB PropertiesReady Boost. Use this device as a virtual RAM and then click Apply then Ok. then I go to My Computer PropertiesAdvance system settingsAdvance(tab)SettingsAdvanceChange. When i click on change button the USB is not here. What can I do. Please answer my question.

  Read the article

• Recommending simple appliance for DansGuardian, iptables, snort inline

  - by SRobertJames

  I'm currently using a Linksys E2000 with dd-wrt. I'd like to add DansGuardian for Content Filtering and snort-inline for IPS; but those require a more powerful box (mainly, more storage). Can you recommend a good device to use? I'm open to both overwrite-the-firmware (like dd-wrt) and designed-to-be-customized boxes. Requirements: 1. 5+ Ethernet ports, pref. GigE 2. small form factor 3. No noise (office environment) 4. low power 5. Not sure about 802.11 wireless Budget < $400, pref. less.

  Read the article

• Advice on new hardware firewall for a small company server-environment

  - by Mestika

  Hi everyone, My companies currently hardware firewall (an old ZyXEL ZyWALL firewall) and is indeed requiring an update to a new firewall. It is a small company with a similar small server-environment, so the need for a huge, complex and expensive solution isn’t there but a more “straight-forward” firewall, that can provide the necessary security to our systems and block unwanted elements from the core server and only accept access through our one server which is used as an “gateway” between the Internet and our internal network. I haven’t that much experience with hardware firewalls so I’m requesting any good advice and/or knowledge on which products will be suited for our specific need. If you need more information about the specific needs we require, please let me know and I’ll provide them to you. Sincerely - Mestika

  Read the article

• Virtual firewall to protect hypervisor

  - by manutenfruits

  I am running an Ubuntu Server 12.10 as a single host connected to a NATed router connected using PPPoE to a optical fiber modem. This server is meant to be accessed from the Internet, but also to be used from the LAN as a SVN, MySQL and what not... The issue is that the router is not customizable enough to serve, so I was thinking about creating a virtual pfSense firewall using KVM inside of the server itself, removing the need of the router. Is this possible? Can the host ignore and block all traffic coming to itself, but not for the firewall? I am aware this is not the most desirable environment, I accept suggestions based on budget!

  Read the article

• ata error: UnrecovData Handshk

  - by Aaron Digulla

  I just saw this message in my log (openSUSE 11.3, Linux 2.6.36.2): ata6.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen ata6.00: irq_stat 0x08000000, interface fatal error ata6: SError: { UnrecovData Handshk } ata6.00: failed command: WRITE FPDMA QUEUED ata6.00: cmd 61/58:00:9f:69:00/00:00:00:00:00/40 tag 0 ncq 45056 out res 40/00:04:9f:69:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error) ata6.00: status: { DRDY } ata6: hard resetting link ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: configured for UDMA/133 ata6: EH complete Two questions: Which disk caused the error? I search /sys and /proc but couldn't find a way to map ata6 to a device (/dev/sdaXY) When such an error happens, does Linux retry the disk operation? Or do I have a corrupt filesystem?

  Read the article

• How to repair unbootable Fedora install

  - by Cerin

  How do you repair/reinstall Fedora without deleting any existing partitions or data? I was attempting to upgrade some old Fedora 13 servers to 17, following the instructions in the wiki. After the 14-15 upgrade, rebooting resulted in the output: Dropping to debug shell. sh: can't access tty; job control turned off dracut:/# Running dmesg also shows: dracut Warning: No root device "block:/dev/mapper/VolGroup-lv_root" found Googling shows this error is typically related to some weird RAID issues, but my server is a virtual machine not using any RAID. Using a rescue CD, I can chroot /mnt/sysimage, and all packages and data still seems to be there. How do I make the system bootable again?

  Read the article

• Win7 backup fails with "The system cannot find the file specified" 0x80070002 - has worked before

  - by Thorbjørn Ravn Andersen

  I have a 500 GB USB-disk which has been used as a backup device for a few years now, but now fails without telling me why. This is a Dell box with Intel USB-controllers (so the NVIDEA problem does not apply here). I have previously had problems with a Git package marking a non-existent directory for backup (adding it make the backup succeede). The inaccessible boot partition problem described in Windows Backup fails with 0x80070002: "The system cannot find the file specified" does not apply to me. I would appreciate hints on where to look to identify why my backup fails so I can fix it.

  Read the article

• Oracle 10g cannot see any data in tables

  - by MMRUSer

  Im getting this error in Oracle 10g log file 2010-11-12 16:07:41.838: [ OCROSD][3069777600]utgdv:2:ocr loc file cannot be opened 2010-11-12 16:07:41.865: [ OCROSD][3069777600]utopen:1: Couldnt find ocr,[ocrmirror] location in config file 2010-11-12 16:07:41.865: [ OCRRAW][3069777600]proprinit: Could not open raw device 2010-11-12 16:07:41.865: [ default][3069777600]a_init:7!: Backend init unsuccessful : [33] 2010-11-12 16:07:41.865: [ CSSCLNT][3069777600]clsssinit: error(33 ) in OCR initialization I was able to connect but can't generate table data form my client program. Plus it was working earlier. Im running on Redhat EL 5 Thanks.

  Read the article

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >