disconnected environment - Page 412

The Linux powered LAN Gaming House

- by sachinghalot

LAN parties offer the enjoyment of head to head gaming in a real-life social environment. In general, they are experiencing decline thanks to the convenience of Internet gaming, but Kenton Varda is a man who takes his LAN gaming very seriously. His LAN gaming house is a fascinating project, and best of all, Linux plays a part in making it all work.Varda has done his own write ups (short, long), so I'm only going to give an overview here. The setup is a large house with 12 gaming stations and a single server computer.The client computers themselves are rack mounted in a server room, and they are linked to the gaming stations on the floor above via extension cables (HDMI for video and audio and USB for mouse and keyboard). Each client computer, built into a 3U rack mount case, is a well specced gaming rig in its own right, sporting an Intel Core i5 processor, 4GB of RAM and an Nvidia GeForce 560 along with a 60GB SSD drive.Originally, the client computers ran Ubuntu Linux rather than Windows and the games executed under WINE, but Varda had to abandon this scheme. As he explains on his site:"Amazingly, a majority of games worked fine, although many had minor bugs (e.g. flickering mouse cursor, minor rendering artifacts, etc.). Some games, however, did not work, or had bad bugs that made them annoying to play."Subsequently, the gaming computers have been moved onto a more conventional gaming choice, Windows 7. It's a shame that WINE couldn't be made to work, but I can sympathize as it's rare to find modern games that work perfectly and at full native speed. Another problem with WINE is that it tends to suffer from regressions, which is hardly surprising when considering the difficulty of constantly improving the emulation of the Windows API. Varda points out that he preferred working with Linux clients as they were easier to modify and came with less licensing baggage.Linux still runs the server and all of the tools used are open source software. The hardware here is a Intel Xeon E3-1230 with 4GB of RAM. The storage hanging off this machine is a bit more complex than the clients. In addition to the 60GB SSD, it also has 2x1TB drives and a 240GB SDD.When the clients were running Linux, they booted over PXE using a toolchain that will be familiar to anyone who has setup Linux network booting. DHCP pointed the clients to the server which then supplied PXELINUX using TFTP. When booted, file access was accomplished through network block device (NBD). This is a very easy to use system that allows you to serve the contents of a file as a block device over the network. The client computer runs a user mode device driver and the device can be mounted within the file system using the mount command.One snag with offering file access via NBD is that it's difficult to impose any security restrictions on different areas of the file system as the server only sees a single file. The advantage is perfomance as the client operating system simply sees a block device, and besides, these security issues aren't relevant in this setup.Unfortunately, Windows 7 can't use NBD, so, Varda had to switch to iSCSI (which works in both server and client mode under Linux). His network cards are not compliant with this standard when doing a netboot, but fortunately, gPXE came to the rescue, and he boostraps it over PXE. gPXE is also available as an ISO image and is worth knowing about if you encounter an awkward machine that can't manage a network boot. It can also optionally boot from a HTTP server rather than the more traditional TFTP server.According to Varda, booting all 12 machines over the Gigabit Ethernet network is surprisingly fast, and once booted, the machines don't seem noticeably slower than if they were using local storage. Once loaded, most games attempt to load in as much data as possible, filling the RAM, and the the disk and network bandwidth required is small. It's worth noting that these are aspects of this project that might differ from some other thin client scenarios.At time of writing, it doesn't seem as though the local storage of the client machines is being utilized. Instead, the clients boot into Windows from an image on the server that contains the operating system and the games themselves. It uses the copy on write feature of LVM so that any writes from a client are added to a differencing image allocated to that client. As the administrator, Varda can log into the Linux server and authorize changes to the master image for updates etc.SummaryOverall, Varda estimates the total cost of the project at about $40,000, and of course, he needed a property that offered a large physical space in order to house the computers and the gaming workstations. Obviously, this project has stark differences to most thin client projects. The balance between storage, network usage, GPU power and security would not be typical of an office installation, for example. The only letdown is that WINE proved to be insufficiently compatible to run a wide variety of modern games, but that is, perhaps, asking too much of it, and hats off to Varda for trying to make it work.

Read the article

Computer Networks UNISA - Chap 14 – Insuring Integrity & Availability

- by MarkPearl

After reading this section you should be able to Identify the characteristics of a network that keep data safe from loss or damage Protect an enterprise-wide network from viruses Explain network and system level fault tolerance techniques Discuss issues related to network backup and recovery strategies Describe the components of a useful disaster recovery plan and the options for disaster contingencies What are integrity and availability? Integrity – the soundness of a networks programs, data, services, devices, and connections Availability – How consistently and reliably a file or system can be accessed by authorized personnel A number of phenomena can compromise both integrity and availability including… security breaches natural disasters malicious intruders power flaws human error users etc Although you cannot predict every type of vulnerability, you can take measures to guard against the most damaging events. The following are some guidelines… Allow only network administrators to create or modify NOS and application system users. Monitor the network for unauthorized access or changes Record authorized system changes in a change management system’ Install redundant components Perform regular health checks on the network Check system performance, error logs, and the system log book regularly Keep backups Implement and enforce security and disaster recovery policies These are just some of the basics… Malware Malware refers to any program or piece of code designed to intrude upon or harm a system or its resources. Types of Malware… Boot sector viruses Macro viruses File infector viruses Worms Trojan Horse Network Viruses Bots Malware characteristics Some common characteristics of Malware include… Encryption Stealth Polymorphism Time dependence Malware Protection There are various tools available to protect you from malware called anti-malware software. These monitor your system for indications that a program is performing potential malware operations. A number of techniques are used to detect malware including… Signature Scanning Integrity Checking Monitoring unexpected file changes or virus like behaviours It is important to decide where anti-malware tools will be installed and find a balance between performance and protection. There are several general purpose malware policies that can be implemented to protect your network including… Every compute in an organization should be equipped with malware detection and cleaning software that regularly runs Users should not be allowed to alter or disable the anti-malware software Users should know what to do in case the anti-malware program detects a malware virus Users should be prohibited from installing any unauthorized software on their systems System wide alerts should be issued to network users notifying them if a serious malware virus has been detected. Fault Tolerance Besides guarding against malware, another key factor in maintaining the availability and integrity of data is fault tolerance. Fault tolerance is the ability for a system to continue performing despite an unexpected hardware or software malfunction. Fault tolerance can be realized in varying degrees, the optimal level of fault tolerance for a system depends on how critical its services and files are to productivity. Generally the more fault tolerant the system, the more expensive it is. The following describe some of the areas that need to be considered for fault tolerance. Environment (Temperature and humidity) Power Topology and Connectivity Servers Storage Power Typical power flaws include Surges – a brief increase in voltage due to lightening strikes, solar flares or some idiot at City Power Noise – Fluctuation in voltage levels caused by other devices on the network or electromagnetic interference Brownout – A sag in voltage for just a moment Blackout – A complete power loss The are various alternate power sources to consider including UPS’s and Generators. UPS’s are found in two categories… Standby UPS – provides continuous power when mains goes down (brief period of switching over) Online UPS – is online all the time and the device receives power from the UPS all the time (the UPS is charged continuously) Servers There are various techniques for fault tolerance with servers. Server mirroring is an option where one device or component duplicates the activities of another. It is generally an expensive process. Clustering is a fault tolerance technique that links multiple servers together to appear as a single server. They share processing and storage responsibilities and if one unit in the cluster goes down, another unit can be brought in to replace it. Storage There are various techniques available including the following… RAID Arrays NAS (Storage (Network Attached Storage) SANs (Storage Area Networks) Data Backup A backup is a copy of data or program files created for archiving or safekeeping. Many different options for backups exist with various media including… These vary in cost and speed. Optical Media Tape Backup External Disk Drives Network Backups Backup Strategy After selecting the appropriate tool for performing your servers backup, devise a backup strategy to guide you through performing reliable backups that provide maximum data protection. Questions that should be answered include… What data must be backed up At what time of day or night will the backups occur How will you verify the accuracy of the backups Where and for how long will backup media be stored Who will take responsibility for ensuring that backups occurred How long will you save backups Where will backup and recovery documentation be stored Different backup methods provide varying levels of certainty and corresponding labour cost. There are also different ways to determine which files should be backed up including… Full backup – all data on all servers is copied to storage media Incremental backup – Only data that has changed since the last full or incremental backup is copied to a storage medium Differential backup – Only data that has changed since the last backup is coped to a storage medium Disaster Recovery Disaster recovery is the process of restoring your critical functionality and data after an enterprise wide outage has occurred. A disaster recovery plan is for extreme scenarios (i.e. fire, line fault, etc). A cold site is a place were the computers, devices, and connectivity necessary to rebuild a network exist but they are not appropriately configured. A warm site is a place where the computers, devices, and connectivity necessary to rebuild a network exists with some appropriately configured devices. A hot site is a place where the computers, devices, and connectivity necessary to rebuild a network exists and all are appropriately configured.

Read the article

Some New .NET Downloads and Resources

- by Kevin Grossnicklaus

Last week I was fortunate enough to spend time in Redmond on Microsoft’s campus for the 2011 Microsoft MVP Summit. It was great to hang out with a number of old friends and get the opportunity to talk tech with the various product teams up at Microsoft. The weather wasn’t exactly sunny but Microsoft always does a great job with the Summit and everyone had a blast (heck, I even got to run the bases at SafeCo field) While much of what we saw is covered under NDA, there a ton of great things in the pipeline from Microsoft and many things that are already available (or just became so) that I wasn’t necessarily aware of. The purpose of this post is to share some of the info I learned on resources and tools available to .NET developers today. Please let me know if you have any questions (or if you know of something else cool which might benefit others). Enjoy! Visual Studio 2010 SP1 Microsoft has issued the RTM release of Visual Studio 2010 SP1. You can download the full SP1 on MSDN as of today (March 10th to the general public) and take advantage of such things as: Silverlight 4 is included in the box (as opposed to a separate install) Silverlight 4 Profiling WCF RIA Services SP1 Intellitrace for 64-bit and SharePoint ASP.NET now easily supports IIS Express and SQL CE Want a description of all that’s new beyond the above biased list (which arguably only contains items I think are important)? Check out this KB article. Portable Library Tools CTP Without much fanfare Microsoft has released a CTP of a new add-in to Visual Studio 2010 which simplifies code sharing between projects targeting different runtimes (i.e. Silverlight, WPF, Win7 Phone, XBox). With this Add-In installed you can add a new project of type “Portable Library” and specify which platforms you wish to target. Once that is done, any code added to this library will be limited to use only features which are common to all selected frameworks. Other projects can now reference this portable library and be provided assemblies custom built to their environment. This greatly simplifies the current process of sharing linked files between platforms like WPF and Silverlight. You can find out more about this CTP and how it works on this great blog post. Visual Studio Async CTP Microsoft has also released a CTP of a set of language and framework enhancements to provide a much more powerful asynchronous programming model. Due to the focus on async programming in all types of platforms (and it being the ONLY option in Silverlight and Win7 phone) a move towards a simpler and more understandable model is always a good thing. This CTP (called Visual Studio Async CTP) can be downloaded here. You can read more about this CTP on this blog post. MSDN Code Samples Gallery Microsoft has also launched new code samples gallery on their MSDN site: http://code.msdn.microsoft.com/. This site allows you to easily search for small samples of code related to a particular technology or platform. If a sample of code you are looking for is not found, you can request one via the site and other developers can see your request and provide a sample to the site to suit your needs. You can also peruse requested samples and, if you find a scenario where you can provide value, upload your own sample for the benefit of others. Samples are packaged into the VS .vsix format and include any necessary references/dependencies. By using .vsix as the deployment mechanism, as samples are installed from the site they are kept in your Visual Studio 2010 Samples Gallery and kept for your future reference. If you get a chance, check out the site and see how it is done. Although a somewhat simple concept, I was very impressed with their implementation and the way they went about trying to suit a need. I’ll definitely be looking there in the future as need something or want to share something. MSDN Search Capabilities Another item I learned recently and was not aware of (that might seem trivial to some) is the power of the MSDN site’s search capabilities. Between the Code Samples Gallery described above and the search enhancements on MSDN, Microsoft is definitely investing in their platform to help provide developers of all skill levels the tools and resources they need to be successful. What do I mean by the MSDN search capability and why should you care? If you go to the MSDN home page (http://msdn.microsoft.com) and use the “Search MSDN with Big” box at the very top of the page you will see some very interesting results. First, the search actually doesn’t just search the MSDN library it searches: MSDN Library All Microsoft Blogs CodePlex StackOverflow Downloads MSDN Magazine Support Knowledgebase (I’m not sure it even ends there but the above are all I know of) Beyond just searching all the above locations, the results are formatted very nicely to give some contextual information based on where the result came from. For example, if a keyword search returned results from CodePlex, each row in the search results screen would include a large amount of information specific to CodePlex such as: Looking at the above results immediately tells you everything from the page views to the CodePlex ratings. All in all, knowing that this much information is indexed and available from a single search location will lead me to utilize this as one of my initial searches for development information.

Read the article

TFS API Add Favorites programmatically

- by Tarun Arora

01 – What are we trying to achieve? In this blog post I’ll be showing you how to add work item queries as favorites, it is also possible to use the same technique to add build definition as favorites. Once a shared query or build definition has been added as favorite it will show up on the team web access. In this blog post I’ll be showing you a work around in the absence of a proper API how you can add queries to team favorites. 02 – Disclaimer There is no official API for adding favorites programmatically. In the work around below I am using the Identity service to store this data in a property bag which is used during display of favorites on the team web site. This uses an internal data structure that could change over time, there is no guarantee about the key names or content of the values. What is shown below is a workaround for a missing API. 03 – Concept There is no direct API support for favorites, but you could work around it using the identity service in TFS. Favorites are stored in the property bag associated with the TeamFoundationIdentity (either the ‘team’ identity or the users identity depending on if these are ‘team’ or ‘my’ favorites). The data is stored as json in the property bag of the identity, the key being prefixed by ‘Microsoft.TeamFoundation.Framework.Server.IdentityFavorites’. References - Microsoft.TeamFoundation.WorkItemTracking.Client - using Microsoft.TeamFoundation.Client; - using Microsoft.TeamFoundation.Framework.Client; - using Microsoft.TeamFoundation.Framework.Common; - using Microsoft.TeamFoundation.ProcessConfiguration.Client; - using Microsoft.TeamFoundation.Server; - using Microsoft.TeamFoundation.WorkItemTracking.Client; Services - IIdentityManagementService2 - TfsTeamService - WorkItemStore 04 – Solution Lets start by connecting to TFS programmatically // Create an instance of the services to be used during the program private static TfsTeamProjectCollection _tfs; private static ProjectInfo _selectedTeamProject; private static WorkItemStore _wis; private static TfsTeamService _tts; private static TeamSettingsConfigurationService _teamConfig; private static IIdentityManagementService2 _ids; // Connect to TFS programmatically public static bool ConnectToTfs() { var isSelected = false; var tfsPp = new TeamProjectPicker(TeamProjectPickerMode.SingleProject, false); tfsPp.ShowDialog(); _tfs = tfsPp.SelectedTeamProjectCollection; if (tfsPp.SelectedProjects.Any()) { _selectedTeamProject = tfsPp.SelectedProjects[0]; isSelected = true; } return isSelected; } Lets get all the work item queries from the selected team project static readonly Dictionary<string, string> QueryAndGuid = new Dictionary<string, string>(); // Get all queries and query guid in the selected team project private static void GetQueryGuidList(IEnumerable<QueryItem> query) { foreach (QueryItem subQuery in query) { if (subQuery.GetType() == typeof(QueryFolder)) GetQueryGuidList((QueryFolder)subQuery); else { QueryAndGuid.Add(subQuery.Name, subQuery.Id.ToString()); } } } Pass the name of a valid Team in your team project and a name of a valid query in your team project. The team details will be extracted using the team name and query GUID will be extracted using the query name. These details will be used to construct the key and value that will be passed to the SetProperty method in the Identity service. Key “Microsoft.TeamFoundation.Framework.Server.IdentityFavorites..<TeamProjectURI>.<TeamId>.WorkItemTracking.Queries.<newGuid1>” Value "{"data":"<QueryGuid>","id":"<NewGuid1>","name":"<QueryKey>","type":"Microsoft.TeamFoundation.WorkItemTracking.QueryItem”}" // Configure a Work Item Query for the given team private static void ConfigureTeamFavorites(string teamName, string queryName) { _ids = _tfs.GetService<IIdentityManagementService2>(); var g = Guid.NewGuid(); var guid = string.Empty; var teamDetail = _tts.QueryTeams(_selectedTeamProject.Uri).FirstOrDefault(t => t.Name == teamName); foreach (var q in QueryAndGuid.Where(q => q.Key == queryName)) { guid = q.Value; } if(guid == string.Empty) { Console.WriteLine("Query '{0}' - Not found!", queryName); return; } var key = string.Format( "Microsoft.TeamFoundation.Framework.Server.IdentityFavorites..{0}.{1}.WorkItemTracking.Queries{2}", new Uri(_selectedTeamProject.Uri).Segments.LastOrDefault(), teamDetail.Identity.TeamFoundationId, g); var value = string.Format( @"{0}""data"":""{1}"",""id"":""{2}"",""name"":""{3}"",""type"":""Microsoft.TeamFoundation.WorkItemTracking.QueryItem""{4}", "{", guid, g, QueryAndGuid.FirstOrDefault(q => q.Value==guid).Key, "}"); teamDetail.Identity.SetProperty(IdentityPropertyScope.Local, key, value); _ids.UpdateExtendedProperties(teamDetail.Identity); Console.WriteLine("{0}Added Query '{1}' as Favorite", Environment.NewLine, queryName); } If you have any questions or suggestions leave a comment. Enjoy!

Read the article

Composing Silverlight Applications With MEF

- by PeterTweed

Anyone who has written an application with complexity enough to warrant multiple controls on multiple pages/forms should understand the benefit of composite application development. That is defining your application architecture that can be separated into separate pieces each with it’s own distinct purpose that can then be “composed” together into the solution. Composition can be useful in any layer of the application, from the presentation layer, the business layer, common services or data access. Historically people have had different options to achieve composing applications from distinct well known pieces – their own version of dependency injection, containers to aid with composition like Unity, the composite application guidance for WPF and Silverlight and before that the composite application block. Microsoft has been working on another mechanism to aid composition and extension of applications for some time now – the Managed Extensibility Framework or MEF for short. With Silverlight 4 it is part of the Silverlight environment. MEF allows a much simplified mechanism for composition and extensibility compared to other mechanisms – which has always been the primary issue for adoption of the earlier mechanisms/frameworks. This post will guide you through the simple use of MEF for the scenario of composition of an application – using exports, imports and composition. Steps: 1. Create a new Silverlight 4 application. 2. Add references to the following assemblies: System.ComponentModel.Composition.dll System.ComponentModel.Composition.Initialization.dll 3. Add a new user control called LeftControl. 4. Replace the LayoutRoot Grid with the following xaml: <Grid x:Name="LayoutRoot" Background="Beige" Margin="40" > <Button Content="Left Content" Margin="30"></Button> </Grid> 5. Add the following statement to the top of the LeftControl.xaml.cs file using System.ComponentModel.Composition; 6. Add the following attribute to the LeftControl class [Export(typeof(LeftControl))] This attribute tells MEF that the type LeftControl will be exported – i.e. made available for other applications to import and compose into the application. 7. Add a new user control called RightControl. 8. Replace the LayoutRoot Grid with the following xaml: <Grid x:Name="LayoutRoot" Background="Green" Margin="40" > <TextBlock Margin="40" Foreground="White" Text="Right Control" FontSize="16" VerticalAlignment="Center" HorizontalAlignment="Center" ></TextBlock> </Grid> 9. Add the following statement to the top of the RightControl.xaml.cs file using System.ComponentModel.Composition; 10. Add the following attribute to the RightControl class [Export(typeof(RightControl))] 11. Add the following xaml to the LayoutRoot Grid in MainPage.xaml: <StackPanel Orientation="Horizontal" HorizontalAlignment="Center"> <Border Name="LeftContent" Background="Red" BorderBrush="Gray" CornerRadius="20"></Border> <Border Name="RightContent" Background="Red" BorderBrush="Gray" CornerRadius="20"></Border> </StackPanel> The borders will hold the controls that will be imported and composed via MEF. 12. Add the following statement to the top of the MainPage.xaml.cs file using System.ComponentModel.Composition; 13. Add the following properties to the MainPage class: [Import(typeof(LeftControl))] public LeftControl LeftUserControl { get; set; } [Import(typeof(RightControl))] public RightControl RightUserControl { get; set; } This defines properties accepting LeftControl and RightControl types. The attrributes are used to tell MEF the discovered type that should be applied to the property when composition occurs. 14. Replace the MainPage constructore with the following code: public MainPage() { InitializeComponent(); CompositionInitializer.SatisfyImports(this); LeftContent.Child = LeftUserControl; RightContent.Child = RightUserControl; } The CompositionInitializer.SatisfyImports(this) function call tells MEF to discover types related to the declared imports for this object (the MainPage object). At that point, types matching those specified in the import defintions are discovered in the executing assembly location of the application and instantiated and assigned to the matching properties of the current object. 15. Run the application and you will see the left control and right control types displayed in the MainPage: Congratulations! You have used MEF to dynamically compose user controls into a parent control in a composite application model. In the next post we will build on this topic to cover using MEF to compose Silverlight applications dynamically in download on demand scenarios – so .xap packages can be downloaded only when needed, avoiding large initial download for the main application xap. Take the Slalom Challenge at www.slalomchallenge.com!

Read the article

ROracle support for TimesTen In-Memory Database

- by Sam Drake

Today's guest post comes from Jason Feldhaus, a Consulting Member of Technical Staff in the TimesTen Database organization at Oracle. He shares with us a sample session using ROracle with the TimesTen In-Memory database. Beginning in version 1.1-4, ROracle includes support for the Oracle Times Ten In-Memory Database, version 11.2.2. TimesTen is a relational database providing very fast and high throughput through its memory-centric architecture. TimesTen is designed for low latency, high-volume data, and event and transaction management. A TimesTen database resides entirely in memory, so no disk I/O is required for transactions and query operations. TimesTen is used in applications requiring very fast and predictable response time, such as real-time financial services trading applications and large web applications. TimesTen can be used as the database of record or as a relational cache database to Oracle Database. ROracle provides an interface between R and the database, providing the rich functionality of the R statistical programming environment using the SQL query language. ROracle uses the OCI libraries to handle database connections, providing much better performance than standard ODBC.The latest ROracle enhancements include: Support for Oracle TimesTen In-Memory Database Support for Date-Time using R's POSIXct/POSIXlt data types RAW, BLOB and BFILE data type support Option to specify number of rows per fetch operation Option to prefetch LOB data Break support using Ctrl-C Statement caching support Times Ten 11.2.2 contains enhanced support for analytics workloads and complex queries: Analytic functions: AVG, SUM, COUNT, MAX, MIN, DENSE_RANK, RANK, ROW_NUMBER, FIRST_VALUE and LAST_VALUE Analytic clauses: OVER PARTITION BY and OVER ORDER BY Multidimensional grouping operators: Grouping clauses: GROUP BY CUBE, GROUP BY ROLLUP, GROUP BY GROUPING SETS Grouping functions: GROUP, GROUPING_ID, GROUP_ID WITH clause, which allows repeated references to a named subquery block Aggregate expressions over DISTINCT expressions General expressions that return a character string in the source or a pattern within the LIKE predicate Ability to order nulls first or last in a sort result (NULLS FIRST or NULLS LAST in the ORDER BY clause) Note: Some functionality is only available with Oracle Exalytics, refer to the TimesTen product licensing document for details. Connecting to TimesTen is easy with ROracle. Simply install and load the ROracle package and load the driver. > install.packages("ROracle") > library(ROracle) Loading required package: DBI > drv <- dbDriver("Oracle") Once the ROracle package is installed, create a database connection object and connect to a TimesTen direct driver DSN as the OS user. > conn <- dbConnect(drv, username ="", password="", dbname = "localhost/SampleDb_1122:timesten_direct") You have the option to report the server type - Oracle or TimesTen? > print (paste ("Server type =", dbGetInfo (conn)$serverType)) [1] "Server type = TimesTen IMDB" To create tables in the database using R data frame objects, use the function dbWriteTable. In the following example we write the built-in iris data frame to TimesTen. The iris data set is a small example data set containing 150 rows and 5 columns. We include it here not to highlight performance, but so users can easily run this example in their R session. > dbWriteTable (conn, "IRIS", iris, overwrite=TRUE, ora.number=FALSE) [1] TRUE Verify that the newly created IRIS table is available in the database. To list the available tables and table columns in the database, use dbListTables and dbListFields, respectively. > dbListTables (conn) [1] "IRIS" > dbListFields (conn, "IRIS") [1] "SEPAL.LENGTH" "SEPAL.WIDTH" "PETAL.LENGTH" "PETAL.WIDTH" "SPECIES" To retrieve a summary of the data from the database we need to save the results to a local object. The following call saves the results of the query as a local R object, iris.summary. The ROracle function dbGetQuery is used to execute an arbitrary SQL statement against the database. When connected to TimesTen, the SQL statement is processed completely within main memory for the fastest response time. > iris.summary <- dbGetQuery(conn, 'SELECT SPECIES, AVG ("SEPAL.LENGTH") AS AVG_SLENGTH, AVG ("SEPAL.WIDTH") AS AVG_SWIDTH, AVG ("PETAL.LENGTH") AS AVG_PLENGTH, AVG ("PETAL.WIDTH") AS AVG_PWIDTH FROM IRIS GROUP BY ROLLUP (SPECIES)') > iris.summary SPECIES AVG_SLENGTH AVG_SWIDTH AVG_PLENGTH AVG_PWIDTH 1 setosa 5.006000 3.428000 1.462 0.246000 2 versicolor 5.936000 2.770000 4.260 1.326000 3 virginica 6.588000 2.974000 5.552 2.026000 4 <NA> 5.843333 3.057333 3.758 1.199333 Finally, disconnect from the TimesTen Database. > dbCommit (conn) [1] TRUE > dbDisconnect (conn) [1] TRUE We encourage you download Oracle software for evaluation from the Oracle Technology Network. See these links for our software: Times Ten In-Memory Database, ROracle. As always, we welcome comments and questions on the TimesTen and Oracle R technical forums.

Read the article

Scripting Part 1

- by rbishop

Dynamic Scripting is a large topic, so let me get a couple of things out of the way first. If you aren't familiar with JavaScript, I can suggest CodeAcademy's JavaScript series. There are also many other websites and books that cover JavaScript from every possible angle.The second thing we need to deal with is JavaScript as a programming language versus a JavaScript environment running in a web browser. Many books, tutorials, and websites completely blur these two together but they are in fact completely separate. What does this really mean in relation to DRM? Since DRM isn't a web browser, there are no document, window, history, screen, or location objects. There are no events like mousedown or click. Trying to call alert('hello!') in DRM will just cause an error. Those concepts are all related to an HTML document (web page) and are part of the Browser Object Model or Document Object Model. DRM has its own object model that exposes DRM-related objects. In practice, feel free to use those sorts of tutorials or practice within your browser; Many of the concepts are directly translatable to writing scripts in DRM. Just don't try to call document.getElementById in your property definition!I think learning by example tends to work the best, so let's try getting a list of all the unique property values for a given node and its children. var uniqueValues = {}; var childEnumerator = node.GetChildEnumerator(); while(childEnumerator.MoveNext()) { var propValue = childEnumerator.GetCurrent().PropValue("Custom.testpropstr1"); print(propValue); if(propValue != null && propValue != '' && !uniqueValues[propValue]) uniqueValues[propValue] = true; } var result = ''; for(var value in uniqueValues){ result += "Found value " + value + ","; } return result; Now lets break this down piece by piece. var uniqueValues = {}; This declares a variable and initializes it as a new empty Object. You could also have written var uniqueValues = new Object(); Why use an object here? JavaScript objects can also function as a list of keys and we'll use that later to store each property value as a key on the object. var childEnumerator = node.GetChildEnumerator(); while(childEnumerator.MoveNext()) { This gets an enumerator for the node's children. The enumerator allows us to loop through the children one by one. If we wanted to get a filtered list of children, we would instead use ChildrenWith(). When we reach the end of the child list, the enumerator will return false for MoveNext() and that will stop the loop. var propValue = childEnumerator.GetCurrent().PropValue("Custom.testpropstr1"); print(propValue); if(propValue != null && propValue != '' && !uniqueValues[propValue]) uniqueValues[propValue] = true; } This gets the node the enumerator is currently pointing at, then calls PropValue() on it to get the value of a property. We then make sure the prop value isn't null or the empty string, then we make sure the value doesn't already exist as a key. Assuming it doesn't we add it as a key with a value (true in this case because it makes checking for an existing value faster when the value exists). A quick word on the print() function. When viewing the prop grid, running an export, or performing normal DRM operations it does nothing. If you have a lot of print() calls with complicated arguments it can slow your script down slightly, but otherwise has no effect. But when using the script editor, all the output of print() will be shown in the Warnings area. This gives you an extremely useful debugging tool to see what exactly a script is doing. var result = ''; for(var value in uniqueValues){ result += "Found value " + value + ","; } return result; Now we build a string by looping through all the keys in uniqueValues and adding that value to our string. The last step is to simply return the result. Hopefully this small example demonstrates some of the core Dynamic Scripting concepts. Next time, we can try checking for node references in other hierarchies to see if they are using duplicate property values.

Read the article

.NET development on a Retina MacBook Pro with Windows 8

- by Jeff

I remember sitting in Building 5 at Microsoft with some of my coworkers, when one of them came in with a shiny new 11” MacBook Air. It was nearly two years ago, and we found it pretty odd that the OEM’s building Windows machines sucked at industrial design in a way that defied logic. While Dell and HP were in a race to the bottom building commodity crap, Apple was staying out of the low-end market completely, and focusing on better design. In the process, they managed to build machines people actually wanted, and maintain an insanely high margin in the process. I stopped buying the commodity crap and custom builds in 2006, when Apple went Intel. As a .NET guy, I was still in it for Microsoft’s stack of development tools, which I found awesome, but had back to back crappy laptops from HP and Dell. After that original 15” MacBook Pro, I also had a Mac Pro tower (that I sold after three years for $1,500!), a 27” iMac, and my favorite, a 17” MacBook Pro (the unibody style) with an SSD added from OWC. The 17” was a little much to carry around because it was heavy, but it sure was nice getting as much as eight hours of battery life, and the screen was amazing. When the rumors started about a 15” model with a “retina” screen inspired by the Air, I made up my mind I wanted one, and ordered it the day it came out. I sold my 17”, after three years, for $750 to a friend who is really enjoying it. I got the base model with the upgrade to 16 gigs of RAM. It feels solid for being so thin, and if you’ve used the third generation iPad or the newer iPhone, you’ll be just as thrilled with the screen resolution. I’m typically getting just over six hours of battery life while running a VM, but Parallels 8 allegedly makes some power improvements, so we’ll see what happens. (It was just released today.) The nice thing about VM’s are that you can run more than one at a time. Primarily I run the Windows 8 VM with four cores (the laptop is quad-core, but has 8 logical cores due to hyperthreading or whatever Intel calls it) and 8 gigs of RAM. I also have a Windows Server 2008 R2 VM I spin up when I need to test stuff in a “real” server environment, and I give it two cores and 4 gigs of RAM. The Windows 8 VM spins up in about 8 seconds. Visual Studio 2012 takes a few more seconds, but count part of that as the “ReSharper tax” as it does its startup magic. The real beauty, the thing I looked most forward to, is that beautifully crisp C# text. Consolas has never looked as good as it does at 10pt. as it does on this display. You know how it looks great at 80pt. when conference speakers demo stuff on a projector? Think that sharpness, only tiny. It’s just gorgeous. Beyond that, everything is just so responsive and fast. Builds of large projects happen in seconds, hundreds of unit tests run in seconds… you just don’t spend a lot of time waiting for stuff. It’s kind of painful to go back to my 27” iMac (which would be better if I put an SSD in it before its third birthday). Are there negatives? A few minor issues, yes. As is the case with OS X, not everything scales right. You’ll see some weirdness at times with splash screens and icons and such. Chrome’s text rendering (in Windows) is apparently not aware of how to deal with higher DPI’s, so text is fuzzy (the OS X version is super sharp, however). You’ll also have to do some fiddling with keyboard settings to use the Windows 8 keyboard shortcuts. Overall, it’s as close to a no-compromise development experience as I’ve ever had. I’m not even going to bother with Boot Camp because the VM route already exceeds my expectations. You definitely get what you pay for. If this one also lasts three years and I can turn around and sell it, it’s worth it for something I use every day.

Read the article

How many developers before continuous integration becomes effective for us?

- by Carnotaurus

There is an overhead associated with continuous integration, e.g., set up, re-training, awareness activities, stoppage to fix "bugs" that turn out to be data issues, enforced separation of concerns programming styles, etc. At what point does continuous integration pay for itself? EDIT: These were my findings The set-up was CruiseControl.Net with Nant, reading from VSS or TFS. Here are a few reasons for failure, which have nothing to do with the setup: Cost of investigation: The time spent investigating whether a red light is due a genuine logical inconsistency in the code, data quality, or another source such as an infrastructure problem (e.g., a network issue, a timeout reading from source control, third party server is down, etc., etc.) Political costs over infrastructure: I considered performing an "infrastructure" check for each method in the test run. I had no solution to the timeout except to replace the build server. Red tape got in the way and there was no server replacement. Cost of fixing unit tests: A red light due to a data quality issue could be an indicator of a badly written unit test. So, data dependent unit tests were re-written to reduce the likelihood of a red light due to bad data. In many cases, necessary data was inserted into the test environment to be able to accurately run its unit tests. It makes sense to say that by making the data more robust then the test becomes more robust if it is dependent on this data. Of course, this worked well! Cost of coverage, i.e., writing unit tests for already existing code: There was the problem of unit test coverage. There were thousands of methods that had no unit tests. So, a sizeable amount of man days would be needed to create those. As this would be too difficult to provide a business case, it was decided that unit tests would be used for any new public method going forward. Those that did not have a unit test were termed 'potentially infra red'. An intestesting point here is that static methods were a moot point in how it would be possible to uniquely determine how a specific static method had failed. Cost of bespoke releases: Nant scripts only go so far. They are not that useful for, say, CMS dependent builds for EPiServer, CMS, or any UI oriented database deployment. These are the types of issues that occured on the build server for hourly test runs and overnight QA builds. I entertain that these to be unnecessary as a build master can perform these tasks manually at the time of release, esp., with a one man band and a small build. So, single step builds have not justified use of CI in my experience. What about the more complex, multistep builds? These can be a pain to build, especially without a Nant script. So, even having created one, these were no more successful. The costs of fixing the red light issues outweighed the benefits. Eventually, developers lost interest and questioned the validity of the red light. Having given it a fair try, I believe that CI is expensive and there is a lot of working around the edges instead of just getting the job done. It's more cost effective to employ experienced developers who do not make a mess of large projects than introduce and maintain an alarm system. This is the case even if those developers leave. It doesn't matter if a good developer leaves because processes that he follows would ensure that he writes requirement specs, design specs, sticks to the coding guidelines, and comments his code so that it is readable. All this is reviewed. If this is not happening then his team leader is not doing his job, which should be picked up by his manager and so on. For CI to work, it is not enough to just write unit tests, attempt to maintain full coverage, and ensure a working infrastructure for sizable systems. The bottom line: One might question whether fixing as many bugs before release is even desirable from a business prespective. CI involves a lot of work to capture a handful of bugs that the customer could identify in UAT or the company could get paid for fixing as part of a client service agreement when the warranty period expires anyway.

Read the article

Mobile Apps for Oracle E-Business Suite

- by Carlos Chang

Crosspost from the mobile apps blog. TL;DR Oracle E-Business Suite is now building mobile apps with Oracle Mobile Application Framework (MAF). Believe it! Build iOS and Android apps with once code base and get it done! By Steven Chan (Oracle Development) Many things have changed in the mobile space over the last few years. Here's an update on our strategy for mobile apps for the E-Business Suite. Mobile app strategy We're building our family of mobile apps for the E-Business Suite using Oracle Mobile Application Framework. This framework allows us to write a single application that can be run on Apple iOS and Google Android platforms. Mobile apps for the E-Business Suite will share a common look-and-feel. The E-Business Suite is a suite of over 200 product modules spanning Financials, Supply Chain, Human Resources, and many other areas. Our mobile app strategy is to release standalone apps for specific product modules. Our Oracle Timecards app, which allows users to create and submit timecards, is an example of a standalone app. Some common functions that span multiple product areas will have dedicated apps, too. An example of this is ourOracle Approvals app, which allows users to review and approve requests for expenses, requisitions, purchase orders, recruitment vacancies and offers, and more. You can read more about our Oracle Mobile Approvals app here: Now Available: Oracle Mobile Approvals for iOS Our goal is to support smaller screen (e.g. smartphones) as well as larger screens (e.g. tablets), with the smaller screen versions generally delivered first. Where possible, we will deliver these as universal apps. An example is our Oracle Mobile Field Service app, which allows field service technicians to remotely access customer, product, service request, and task-related information. This app can run on a smartphone, while providing a richer experience for tablets. Deploying EBS mobile apps The mobile apps, themselves (i.e. client-side components) can be downloaded by end-users from the Apple iTunes today. Android versions will be available from Google play. You can monitor this blog for Android-related updates. Where possible, our mobile apps should be deployable with a minimum of server-side changes. These changes will generally involve a consolidated server-side patch for technology-stack components, and possibly a server-side patch for the functional product module. Updates to existing mobile apps may require new server-side components to enable all of the latest mobile functionality. All EBS product modules are certified for internal intranet deployments (i.e. used by employees within an organization's firewall). Only a subset of EBS products such as iRecruitment are certified to be deployed externally (i.e. used by non-employees outside of an organization's firewall). Today, many organizations running the E-Business Suite do not expose their EBS environment externally and all of the mobile apps that we're building are intended for internal employee use. Recognizing this, our mobile apps are currently designed for users who are connected to the organization's intranet via VPN. We expect that this may change in future updates to our mobile apps. Mobile apps and internationalization The initial releases of our mobile apps will be in English. Later updates will include translations for all left-to-right languages supported by the E-Business Suite. Right-to-left languages will not be translated. Customizing apps for enterprise deployments The current generation of mobile apps for Oracle E-Business Suite cannot be customized. We are evaluating options for limited customizations, including corporate branding with logos, corporate color schemes, and others. This is a potentially-complex area with many tricky implications for deployment and maintenance. We would be interested in hearing your requirements for customizations in enterprise deployments.Prerequisites Apple iOS 7 and higher Android 4.1 (API level 16) and higher, with minimum CPU/memory configurations listed here EBS 12.1: EBS 12.1.3 Family Packs for the related product module EBS 12.2.3 References Oracle E-Business Suite Mobile Apps, Release 12.1 and 12.2 Documentation (Note 1641772.1) Oracle E-Business Suite Mobile Apps Administrator's Guide, Release 12.1 and 12.2 (Note 1642431.1) Follow @OracleMobile on Twitter Oracle Mobile Blog is here.

Read the article

To My 24 Year Old Self, Wherever You Are…

- by D'Arcy Lussier

A decade is a milestone in one’s life, regardless of when it occurs. 2011 might seem like a weird year to mark a decade, but 2001 was a defining year for me. It marked my emergence into the technology industry, an unexpected loss of innocence, and triggered an ongoing struggle with faith and belief. Once you go through a valley, climbing the mountain and looking back over where you travelled, you can take in the entirety of the journey. Over the last 10 years I kept journals, and in this new year I took some time to review them. For those today that are me a decade ago, I share with you what I’ve gleamed from my experiences. Take it for what it’s worth, and safe travels on your own journeys through life. Life is a Performance-Based Sport Have confidence, believe you’re capable, but realize that life is a performance-based sport. Everything you get in life is based on whether you can show that you deserve it. Performance is also your best defense against personal attacks. Just make sure you know what standards you’re expected to hit and if people want to poke holes at you let them do the work of trying to find them. Sometimes performance won’t matter though. Good things will happen to bad people, and bad things to good people. What’s important is that you do the right things and ensure the good and bad even out in your own life. How you finish is just as important as how you start. Start strong, end strong. Respect is Your Most Prized Reward Respect is more important than status or ego. The formula is simple: Performing Well + Building Trust + Showing Dedication = Respect Focus on perfecting your craft and helping your team and respect will come. Life is a Team Sport Whatever aspect of your life, you can’t do it alone. You need to rely on the people around you and ensure you’re a positive aspect of their lives; even those that may be difficult or unpleasant. Avoid criticism and instead find ways to help colleagues and superiors better whatever environment you’re in (work, home, etc.). Don’t just highlight gaps and issues, but also come to the table with solutions. At the same time though, stand up for yourself and hold others accountable for the commitments they make to the team. A healthy team needs accountability. Give feedback early and often, and make it verbal. Issues should be dealt with immediately, and positives should be celebrated as they happen. Life is a Contact Sport Difficult moments will happen. Don’t run from them or shield yourself from experiencing them. Embrace them. They will further mold you and reveal who you will become. Find Your Tribe and Embrace Your Community We all need a tribe: a group of people that we gravitate to for support, guidance, wisdom, and friendship. Discover your tribe and immerse yourself in them. Don’t look for a non-existent tribe just to fill the need of belonging though that will leave you empty and bitter when they don’t meet your unrealistic expectations. Try to associate with people more experienced and more knowledgeable than you. You’ll always learn, and you’ll always remember you have much to learn. Put yourself out there, get involved with the community. Opportunities will present themselves. When we open ourselves up to be vulnerable, we also give others the chance to do the same. This helps us all to grow and help each other, it’s very important. And listen to your wife. (Easter *is* a romantic holiday btw, regardless of what you may think.) Don’t Believe Your Own Press Clippings (and by that I mean the ones you write) Until you have a track record of performance to refer to, any notions of grandeur are just that: notions. You lose your rookie status through trials and tribulations, not by the number of stamps in your passport. Be realistic about your own “experience and leadership” and be honest when you aren’t ready for something. And always remember: nobody really cares about you as much as you think they do. Don’t Let Assholes Get You Down The world isn’t evil, but there is evil in the world. Know the difference and don’t paint all people with the same brush. Do be wary of those that use personal beliefs to describe their business (i.e. “We’re a [religion] company”). What matters is the culture of the organization, and that will tell you the moral compass and what is truly valued. Don’t make someone or something a priority that only makes you an option. Life is unfair and enemies/opponents will succeed when you fail. Don’t waste your energy getting upset at this; the only one that will lose out is you. As mentioned earlier, nobody really cares about you as much as you think they do. Misc Ecclesiastes is bullshit. Everything is certainly *not* meaningless. Software development is about delivery, not the process. Having a great process means nothing if you don’t produce anything. Watch “The Weatherman” (“It’s not easy, but easy doesn’t enter into grownup life.”). Read Tony Dungee’s autobiography, even if you don’t like football, and even if you aren’t a Christian. Say no, don’t feel like you have to commit right away when someone asks you to.

Read the article

Managing Your First SharePoint Project or Team

- by Mark Rackley

(*editor’s note* If you have proper SharePoint Training, know the difference between a site and a site collection, and have the utmost respect for the knowledge of your SharePoint team skip this blog and go directly to meetdux.com, do not pass go, do not collect $200… otherwise, please proceed) Dear Mr. or Mrs. I-know-nothing-about-SharePoint-but-hey,-I-have-manager-in-my-title-so-I’ll-tell-you-how-to-your-job, Thank you so much for joining the Acme corporation. We appreciate your eagerness and willingness to jump in and help us accomplish all of our goals here at acme (these roadrunner rockets don’t make themselves). You may have noticed that we have this thing called SharePoint lying around and we have invested some time in money to make it not a complete piece of garbage. So, I thought I’d give you some pointers to help make your stay here enjoyable and productive. Yeah… you don’t really know SharePoint Just because you had a mysite at your last organization or had a SharePoint 2003 team site does NOT mean you comprehend the vastness that is SharePoint. You don’t know what’s going on behind the scenes. You don’t know what should and should not be done. No, we CAN’T just query the SQL database directly. Yes, it really does take that long. No, we can’t do that out-of-the-box. Your experience doesn’t mean as much as you think it means… Yes, I’m aware that you co-created the internet with Al Gore and have been managing projects since I was blowing up GI Joe figures with firecrackers, however SharePoint is not like anything you have worked with before from a management perspective. Please don’t tell us the proper way to do our job or tell us how “you” would do it, and PLEASE don’t utter the words “I used to do some .NET development so let me know if you get stuck and need some guidance.” It MAY be possible for a incredible project manager to manage a SharePoint project and not understand the technology, but if you force your ideas on us or treat us like we don’t really know what we’re doing then you will prove yourself to NOT be one of those types. Oh no you didn’t… Please don’t tell us how you can bring in a group of guys of Kazakhstan to do the project for $20/hr. There are many companies out there who can do some really crappy SharePoint work and we don’t want to be stuck maintaining their junk. Do you know what it means to deploy a solution? Neither do some of those companies out there. However, there are are few AWESOME consulting firms out there but $150/hr is cheap for these guys. Believe me, it’s worth it though. You get what you pay for! Show us some respect We truly do appreciate and value your opinion and experience, but when we tell you something is different in SharePoint don’t be condescending and dismiss OUR experience and opinions. We have spent a lot of time and energy learning a very complicated technology that can open up a world of possibilities when used properly. We just want to make sure it is used properly. It’s not the same as .NET development. It’s not like a regular web application. There’s more going on behind the scenes than you can possibly fathom. Have a little faith in us please and listen when we talk. You may actually learn a thing or two. Take some time to learn the technology There is hope… you don’t have to be totally worthless. Take some time to learn SharePoint. Learn what it is and what it can do. Invest some time in learning our SharePoint environment. What’s our logical architecture and taxonomy? What governance do we have in place? If you just thought “huh?” then yes, I’m talking to you. Sincerely, Your SharePoint Team (This rant is not pointed at any particular organization or person. If you think it’s about you, you are wrong. This is just a general rant based upon things people have told me and things I’ve seen. If you don’t think it applies to you, please move on. If you think you might be guilty of handling your SharePoint team the wrong way, then just please listen, learn, and have a little faith in your team. You all have the same goal in mind. Also, take the time to learn something about SharePoint, you will all be less frustrated with each other.)

Read the article

Myths about Coding Craftsmanship part 2

- by tom

Myth 3: The source of all bad code is inept developers and stupid people When you review code is this what you assume? Shame on you. You are probably making assumptions in your code if you are assuming so much already. Bad code can be the result of any number of causes including but not limited to using dated techniques (like boxing when generics are available), not following standards (“look how he does the spacing between arguments!” or “did he really just name that variable ‘bln_Hello_Cats’?”), being redundant, using properties, methods, or objects in a novel way (like switching on button.Text between “Hello World” and “Hello World “ //clever use of space character… sigh), not following the SOLID principals, hacking around assumptions made in earlier iterations / hacking in features that should be worked into the overall design. The first two issues, while annoying are pretty easy to spot and can be fixed so easily. If your coding team is made up of experienced professionals who are passionate about staying current then these shouldn’t be happening. If you work with a variety of skills, backgrounds, and experience then there will be some of this stuff going on. If you have an opportunity to mentor such a developer who is receptive to constructive criticism don’t be a jerk; help them and the codebase will improve. A little patience can improve the codebase, your work environment, and even your perspective. The novelty and redundancy I have encountered has often been the use of creativity when language knowledge was perceived as unavailable or too time consuming. When developers learn on the job you get a lot of this. Rather than going to MSDN developers will use what they know. Depending on the constraints of their assignment hacking together what they know may seem quite practical. This was not stupid though I often wonder how much time is actually “saved” by hacking. These issues are often harder to untangle if we ever do. They can also grow out of control as we write hack after hack to make it work and get back to some development that is satisfying. Hacking upon an existing hack is what I call “feeding the monster”. Code monsters are anti-patterns and hacks gone wild. The reason code monsters continue to get bigger is that they keep growing in scope, touching more and more of the application. This is not the result of dumb developers. It is probably the result of avoiding design, not taking the time to understand the problems or anticipate or communicate the vision of the product. If our developers don’t understand the purpose of a feature or product how do we expect potential customers to do so? Forethought and organization are often what is missing from bad code. Developers who do not use the SOLID principals should be encouraged to learn these principals and be given guidance on how to apply them. The time “saved” by giving hackers room to hack will be made up for and then some. Not as technical debt but as shoddy work that if not replaced will be struggled with again and again. Bad code is not the result of dumb developers (usually) it is the result of trying to do too much without the proper resources and neglecting the right thing that needs doing with the first thoughtless thing that comes into our heads. Object oriented code is all about relationships between objects. Coders who believe their coworkers are all fools tend to write objects that are difficult to work with, not eager to explain themselves, and perform erratically and irrationally. If you constantly find you are surrounded by idiots you may want to ask yourself if you are being unreasonable, if you are being closed minded, of if you have chosen the right profession. Opening your mind up to the idea that you probably work with rational, well-intentioned people will probably make you a better coder and it might even make you less grumpy. If you are surrounded by jerks who do not engage in the exchange of ideas who do not care about their customers or the durability of the code you are building together then I suggest you find a new place to work. Myth 4: Customers don’t care about “beautiful” code Craftsmanship is customer focused because it means that the job was done right, the product will withstand the abuse, modifications, and scrutiny of our customers. Users can appreciate a predictable timeline for a release, a product delivered on time and on budget, a feature set that does not interfere with the task(s) it is supporting, quick turnarounds on exception messages, self healing issues, and less issues. These are all hindered by skimping on craftsmanship. When we write data access and when we write reusable code. What do you think? Does bad code come primarily from low IQ individuals? Do customers care about beautiful code?

Read the article

Microsoft BUILD 2013 Day 1–Keynote

- by Tim Murphy

Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/06/27/microsoft-build-2013-day-1ndashkeynote.aspx This one is going to be a little long because the keynote was jam-packed so bare with me. The keynote for the first day of BUILD 2013 was kicked off by Steve Balmer. He made it very clear that Microsoft’s focus is on accelerating its time to market with products and product updates. His quote was that “Rapid release” is the new norm. He continued by showing off several new Lumias that have been buzzing around the internet for a while and announce that Sprint will now be carrying the HTC 8XT and Samsung ATIV. Balmer is known for repeating words or phrase for affect. This time it was “Rapid release, rapid release” and “Touch, touch, touch, touch, touch, …”. This was fun, but even more fun was when he announce that all attendees would receive an Acer Iconia 8” tablet. SCORE! The next subject Balmer focused on is new apps. The three new ones were Flipboard, Facebook and NFL Fantasy Football. I liked the first two because these are ones that people coming from other platforms are missing. The NFL app is great just because it targets a demographic that can be fanatical. If these types of apps keep coming than the missing app argument goes away. While many Negative Nancy’s are describing Windows 8.1 as Windows 180 Steve Balmer chose to call it a “refined blend” as in a coffee that has been improved with a new mix. This includes more multi-tasking options and leveraging Bing straight throughout the entire ecosystem. He ended this first section by explaining that this will also bring more Bing development opportunities to the community. Steve Balmer was followed by Julie Larson-Green who spent her time on stage selling us on Windows 8 all over again from my point of view. Something that I would not have thought was needed until I had listened to some other attendees who had a number of concerns and complaints. She showed a number of new gestures that will come with Windows 8.1, and while they were cool I was left wondering if they really improved the experience. I guess only time will tell. I did like the fact that it the UI implementation to bring up “All Apps” now mirrors that of Windows Phone. The consistency is a big step forward that I hope to see continue. The cool factor went up from there as she swiped content from a desktop (mega-tablet) to the XBox One. This seamless experience I believe is what is really needed for any future platform to be relevant. I was much more enthused by the presentation of Antoine Leblond who humbled us by letting us know that there are 5k new API. How that can be or how anyone would ever use all of them is another question. His announcement was that the Visual Studio 2013 preview would be available today along with the Windows 8.1 bits. One of the features of VS2013 that he demonstrated is the power consumption profiler. With battery life being a key factor with consumer consumption devices this is a welcome addition. He didn’t limit his presentation to VS2013 features though. He showed how the Store has been redesigned to enable better search and discoverability of apps and how Win 8.1 can perform multiple screen scales depending on the resolution of the device automatically. The last feature he demoed was the real time video streaming API which he made sure we understood by attaching a Surface to a little robot. Oh, but there was one more thing. Antoine and Julie announce that all attendees would also be getting Surface Pros. BONUS! How much more could there be? Gurdeep Singh Pall was about to pile on. He introduced us to Bing as a platform (BaaP?). He said if they (Microsoft) could do something with and API that is good 3rd party developers can do something that is dynamite and showed us some of the tools they had produced. These included natural user interface improvements such as voice commands that looked to put Siri to shame. Add to that 3D, OCR and translation capabilities and the future looks to be full of opportunities. Balmer then came out to show us one last thing. Project Spark is a game design environment that will be available for Windows 8.1, XBox 360 and XBox One. All I can say is that if my kids get their hands on this they are going to be able to learn some of what dad does in a much more enjoyable way. At the end of it all I was both exhausted and energized by what I saw. What could they have possibly left for the day 2 keynote? I hear it will feature Scott Hanselman. If that is right we are in for a treat. See you there. del.icio.us Tags: BUILD 2013,Windows 8.1,Winodws Phone,XAML,Keynote,Bing,Visual Studio 2013,Project Spark

Read the article

Database Rebuild

- by Robert May

I promised I’d have a simpler mechanism for rebuilding the database. Below is a complete MSBuild targets file for rebuilding the database from scratch. I don’t know if I’ve explained the rational for this. The reason why you’d WANT to do this is so that each developer has a clean version of the database on their local machine. This also includes the continuous integration environment. Basically, you can do whatever you want to the database without fear, and in a minute or two, have a completely rebuilt database structure. DBDeploy (including the KTSC build task for dbdeploy) is used in this script to do change tracking on the database itself. The MSBuild ExtensionPack is used in this target file. You can get an MSBuild DBDeploy task here. There are two database scripts that you’ll see below. First is the task for creating an admin (dbo) user in the system. This script looks like the following: USE [master] GO If not Exists (select Name from sys.sql_logins where name = '$(User)') BEGIN CREATE LOGIN [$(User)] WITH PASSWORD=N'$(Password)', DEFAULT_DATABASE=[$(DatabaseName)], CHECK_EXPIRATION=OFF, CHECK_POLICY=OFF END GO EXEC master..sp_addsrvrolemember @loginame = N'$(User)', @rolename = N'sysadmin' GO USE [$(DatabaseName)] GO CREATE USER [$(User)] FOR LOGIN [$(User)] GO ALTER USER [$(User)] WITH DEFAULT_SCHEMA=[dbo] GO EXEC sp_addrolemember N'db_owner', N'$(User)' GO The second creates the changelog table. This script can also be found in the dbdeploy.net install\scripts directory. CREATE TABLE changelog ( change_number INTEGER NOT NULL, delta_set VARCHAR(10) NOT NULL, start_dt DATETIME NOT NULL, complete_dt DATETIME NULL, applied_by VARCHAR(100) NOT NULL, description VARCHAR(500) NOT NULL ) GO ALTER TABLE changelog ADD CONSTRAINT Pkchangelog PRIMARY KEY (change_number, delta_set) GO Finally, Here’s the targets file. <Projectxmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="4.0" DefaultTargets="Update"> <PropertyGroup> <DatabaseName>TestDatabase</DatabaseName> <Server>localhost</Server> <ScriptDirectory>.\Scripts</ScriptDirectory> <RebuildDirectory>.\Rebuild</RebuildDirectory> <TestDataDirectory>.\TestData</TestDataDirectory> <DbDeploy>.\DBDeploy</DbDeploy> <User>TestUser</User> <Password>TestPassword</Password> <BCP>bcp</BCP> <BCPOptions>-S$(Server) -U$(User) -P$(Password) -N -E -k</BCPOptions> <OutputFileName>dbDeploy-output.sql</OutputFileName> <UndoFileName>dbDeploy-output-undo.sql</UndoFileName> <LastChangeToApply>99999</LastChangeToApply> </PropertyGroup> <ImportProject="$(MSBuildExtensionsPath)\ExtensionPack\4.0\MSBuild.ExtensionPack.tasks"/> <UsingTask TaskName="Ktsc.Build.DBDeploy" AssemblyFile="$(DbDeploy)\Ktsc.Build.dll"/> <ItemGroup> <VariableInclude="DatabaseName"> <Value>$(DatabaseName)</Value> </Variable> <VariableInclude="Server"> <Value>$(Server)</Value> </Variable> <VariableInclude="User"> <Value>$(User)</Value> </Variable> <VariableInclude="Password"> <Value>$(Password)</Value> </Variable> </ItemGroup> <TargetName="Rebuild">  <MSBuild.ExtensionPack.SqlServer.SqlCmd Variables="@(Variable)" Database="$(DatabaseName)" TaskAction="Execute" CommandLineQuery ="ALTER DATABASE $(DatabaseName) SET OFFLINE WITH ROLLBACK IMMEDIATE"/>  <MSBuild.ExtensionPack.Sql2008.DatabaseTaskAction="SetOnline" DatabaseItem="$(DatabaseName)"/>  <MSBuild.ExtensionPack.Sql2008.DatabaseTaskAction="Delete" DatabaseItem="$(DatabaseName)"/>  <MSBuild.ExtensionPack.Sql2008.DatabaseTaskAction="Create" DatabaseItem="$(DatabaseName)" Force="True"/>  <MSBuild.ExtensionPack.SqlServer.SqlCmd TaskAction="Execute" Server="(local)" Database="$(DatabaseName)" InputFiles="$(RebuildDirectory)\0002 Create Admin User.sql" Variables="@(Variable)" />  <MSBuild.ExtensionPack.SqlServer.SqlCmd TaskAction="Execute" Server="(local)" Database="$(DatabaseName)" LogOn="$(User)" Password="$(Password)" InputFiles="$(RebuildDirectory)\0003 Create Changelog.sql" Variables="@(Variable)" /> <CallTarget Targets="Update;ImportData"/> </Target> <TargetName="Update" DependsOnTargets="CreateUpdateScript"> <MSBuild.ExtensionPack.SqlServer.SqlCmd TaskAction="Execute" Server="(local)" Database="$(DatabaseName)" LogOn="$(User)" Password="$(Password)" InputFiles="$(OutputFileName)" Variables="@(Variable)" /> </Target> <TargetName="CreateUpdateScript"> <ktsc.Build.DBDeploy DbType="mssql" DbConnection="User=$(User);Password=$(Password);Data Source=$(Server);Initial Catalog=$(DatabaseName);" Dir="$(ScriptDirectory)" OutputFile="..\$(OutputFileName)" UndoOutputFile="..\$(UndoFileName)" LastChangeToApply="$(LastChangeToApply)"/> </Target> <TargetName="ImportData"> <ItemGroup> <TestData Include="$(TestDataDirectory)\*.dat"/> </ItemGroup> <ExecCommand="$(BCP) $(DatabaseName).dbo.%(TestData.Filename) in"%(TestData.Identity)"$(BCPOptions)"/> </Target> </Project> Technorati Tags: MSBuild

Read the article

The Enterprise is a Curmudgeon

- by John K. Hines

Working in an enterprise environment is a unique challenge. There's a lot more to software development than developing software. A project lead or Scrum Master has to manage personalities and intra-team politics, has to manage accomplishing the task at hand while creating the opportunities and a reputation for handling desirable future work, has to create a competent, happy team that actually delivers while being careful not to burn bridges or hurt feelings outside the team. Which makes me feel surprised to read advice like: " The enterprise should figure out what is likely to work best for itself and try to use it." - Ken Schwaber, The Enterprise and Scrum. The enterprises I have experience with are fundamentally unable to be self-reflective. It's like asking a Roman gladiator if he'd like to carve out a little space in the arena for some silent meditation. I'm currently wondering how compatible Scrum is with the top-down hierarchy of life in a large organization. Specifically, manufacturing-mindset, fixed-release, harmony-valuing large organizations. Now I understand why Agile can be a better fit for companies without much organizational inertia. Recently I've talked with nearly two dozen software professionals and their managers about Scrum and Agile. I've become convinced that a developer, team, organization, or enterprise can be Agile without using Scrum. But I'm not sure about what process would be the best fit, in general, for an enterprise that wants to become Agile. It's possible I should read more than just the introduction to Ken's book. I do feel prepared to answer some of the questions I had asked in a previous post: How can Agile practices (including but not limited to Scrum) be adopted in situations where the highest-placed managers in a company demand software within extremely aggressive deadlines? Answer: In a very limited capacity at the individual level. The situation here is that the senior management of this company values any software release more than it values developer well-being, end-user experience, or software quality. Only if the developing organization is given an immediate refactoring opportunity does this sort of development make sense to a person who values sustainable software. How can Agile practices be adopted by teams that do not perform a continuous cycle of new development, such as those whose sole purpose is to reproduce and debug customer issues? Answer: It depends. For Scrum in particular, I don't believe Scrum is meant to manage unpredictable work. While you can easily adopt XP practices for bug fixing, the project-management aspects of Scrum require some predictability. My question here was meant toward those who want to apply Scrum to non-development teams. In some cases it works, in others it does not. How can a team measure if its development efforts are both Agile and employ sound engineering practices? Answer: I'm currently leaning toward measuring these independently. The Agile Principles are a terrific way to measure if a software team is agile. Sound engineering practices are those practices which help developers meet the principles. I think Scrum is being mistakenly applied as an engineering practice when it is essentially a project management practice. In my opinion, XP and Lean are examples of good engineering practices. How can Agile be explained in an accurate way that describes its benefits to sceptical developers and/or revenue-focused non-developers? Answer: Agile techniques will result in higher-quality, lower-cost software development. This comes primarily from finding defects earlier in the development cycle. If there are individual developers who do not want to collaborate, write unit tests, or refactor, then these are simply developers who are either working in an area where adding these techniques will not add value (i.e. they are an expert) or they are a developer who is satisfied with the status quo. In the first case they should be left alone. In the second case, the results of Agile should be demonstrated by other developers who are willing to receive recognition for their efforts. It all comes down to individuals, doesn't it? If you're working in an organization whose Agile adoption consists exclusively of Scrum, consider ways to form individual Agile teams to demonstrate its benefits. These can even be virtual teams that span people across org-chart boundaries. Once you can measure real value, whether it's Scrum, Lean, or something else, people will follow. Even the curmudgeons.

Read the article

java.util.zip.ZipException: Error opening file When Deploying an Application to Weblogic Server

- by lmestre

The latest weeks we had a hard time trying to solve a deployment issue.* WebLogic Server 10.3.6* Target: WLS Cluster<21-10-2013 05:29:40 PM CLST> <Error> <Console> <BEA-240003> <Console encountered the following error weblogic.management.DeploymentException: at weblogic.servlet.internal.WarDeploymentFactory.findOrCreateComponentMBeans(WarDeploymentFactory.java:69) at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48) at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110) at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76) at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:89) at weblogic.management.deploy.internal.MBeanConverter.createApplicationForAppDeployment(MBeanConverter.java:67) at weblogic.management.deploy.internal.MBeanConverter.setupNew81MBean(MBeanConverter.java:315) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.compatibilityProcessor(ActivateOperation.java:81) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.setupPrepare(AbstractOperation.java:295) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:97) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)Caused by: java.util.zip.ZipException: Error opening file - C:\Oracle\Middleware\user_projects\domains\MyDomain\servers\MyServer\stage\myapp\myapp.war Message - error in opening zip file at weblogic.servlet.utils.WarUtils.existsInWar(WarUtils.java:87) at weblogic.servlet.utils.WarUtils.isWebServices(WarUtils.java:76) at weblogic.servlet.internal.WarDeploymentFactory.findOrCreateComponentMBeans(WarDeploymentFactory.java:61) So the first idea you have with that error is that the war file is corrupted or has incorrect privileges. We tried:1. Unzipping the war file, the file was perfect.2. Checking the size, same size as in other environments.3. Checking the ownership of the file, same as in other environments.4. Checking the permissions of the file, same as other applications.Then we accepted the file was fine, so we tried enabling some deployment debugs, but no clues.We also tried:1. Delete all contents of <MyDomain/servers/<MyServer>/tmp> a and <MyDomain/servers/<MyServer>/cache> folders, the issue persisted.2. When renaming the application the deployment was sucessful3. When targeting to the Admin Server, deployment was also working.4. Using 'Copy this application onto every target for me' didn't help either.Finally, my friend 'Test Case' solved the issue again.I saw this name in the config.xml<jdbc-system-resource> <name>myapp</name> <target></target> <descriptor-file-name>jdbc/myapp-jdbc.xml</descriptor-file-name> </jdbc-system-resource> So, it turned out that customer had created a DataSource with the same name as the application 'myapp' in the above example.By deleting the datasource and created another exact DataSource with a different name the issue was solved.At this point, Do you know Why 'java.util.zip.ZipException: Error opening file' was occurring?Because all names is WebLogic Server need to be unique.References: http://docs.oracle.com/cd/E23943_01/web.1111/e13709/setup.htm"Assigning Names to WebLogic Server ResourcesMake sure that each configurable resource in your WebLogic Server environment has a unique name. Each, domain, server, machine, cluster, JDBC data source, virtual host, or other resource must have a unique name." Enjoy!

Read the article

ROracle support for TimesTen In-Memory Database

- by Sherry LaMonica

Today's guest post comes from Jason Feldhaus, a Consulting Member of Technical Staff in the TimesTen Database organization at Oracle. He shares with us a sample session using ROracle with the TimesTen In-Memory database. Beginning in version 1.1-4, ROracle includes support for the Oracle Times Ten In-Memory Database, version 11.2.2. TimesTen is a relational database providing very fast and high throughput through its memory-centric architecture. TimesTen is designed for low latency, high-volume data, and event and transaction management. A TimesTen database resides entirely in memory, so no disk I/O is required for transactions and query operations. TimesTen is used in applications requiring very fast and predictable response time, such as real-time financial services trading applications and large web applications. TimesTen can be used as the database of record or as a relational cache database to Oracle Database. ROracle provides an interface between R and the database, providing the rich functionality of the R statistical programming environment using the SQL query language. ROracle uses the OCI libraries to handle database connections, providing much better performance than standard ODBC.The latest ROracle enhancements include: Support for Oracle TimesTen In-Memory Database Support for Date-Time using R's POSIXct/POSIXlt data types RAW, BLOB and BFILE data type support Option to specify number of rows per fetch operation Option to prefetch LOB data Break support using Ctrl-C Statement caching support Times Ten 11.2.2 contains enhanced support for analytics workloads and complex queries: Analytic functions: AVG, SUM, COUNT, MAX, MIN, DENSE_RANK, RANK, ROW_NUMBER, FIRST_VALUE and LAST_VALUE Analytic clauses: OVER PARTITION BY and OVER ORDER BY Multidimensional grouping operators: Grouping clauses: GROUP BY CUBE, GROUP BY ROLLUP, GROUP BY GROUPING SETS Grouping functions: GROUP, GROUPING_ID, GROUP_ID WITH clause, which allows repeated references to a named subquery block Aggregate expressions over DISTINCT expressions General expressions that return a character string in the source or a pattern within the LIKE predicate Ability to order nulls first or last in a sort result (NULLS FIRST or NULLS LAST in the ORDER BY clause) Note: Some functionality is only available with Oracle Exalytics, refer to the TimesTen product licensing document for details. Connecting to TimesTen is easy with ROracle. Simply install and load the ROracle package and load the driver. > install.packages("ROracle") > library(ROracle) Loading required package: DBI > drv <- dbDriver("Oracle") Once the ROracle package is installed, create a database connection object and connect to a TimesTen direct driver DSN as the OS user. > conn <- dbConnect(drv, username ="", password="", dbname = "localhost/SampleDb_1122:timesten_direct") You have the option to report the server type - Oracle or TimesTen? > print (paste ("Server type =", dbGetInfo (conn)$serverType)) [1] "Server type = TimesTen IMDB" To create tables in the database using R data frame objects, use the function dbWriteTable. In the following example we write the built-in iris data frame to TimesTen. The iris data set is a small example data set containing 150 rows and 5 columns. We include it here not to highlight performance, but so users can easily run this example in their R session. > dbWriteTable (conn, "IRIS", iris, overwrite=TRUE, ora.number=FALSE) [1] TRUE Verify that the newly created IRIS table is available in the database. To list the available tables and table columns in the database, use dbListTables and dbListFields, respectively. > dbListTables (conn) [1] "IRIS" > dbListFields (conn, "IRIS") [1] "SEPAL.LENGTH" "SEPAL.WIDTH" "PETAL.LENGTH" "PETAL.WIDTH" "SPECIES" To retrieve a summary of the data from the database we need to save the results to a local object. The following call saves the results of the query as a local R object, iris.summary. The ROracle function dbGetQuery is used to execute an arbitrary SQL statement against the database. When connected to TimesTen, the SQL statement is processed completely within main memory for the fastest response time. > iris.summary <- dbGetQuery(conn, 'SELECT SPECIES, AVG ("SEPAL.LENGTH") AS AVG_SLENGTH, AVG ("SEPAL.WIDTH") AS AVG_SWIDTH, AVG ("PETAL.LENGTH") AS AVG_PLENGTH, AVG ("PETAL.WIDTH") AS AVG_PWIDTH FROM IRIS GROUP BY ROLLUP (SPECIES)') > iris.summary SPECIES AVG_SLENGTH AVG_SWIDTH AVG_PLENGTH AVG_PWIDTH 1 setosa 5.006000 3.428000 1.462 0.246000 2 versicolor 5.936000 2.770000 4.260 1.326000 3 virginica 6.588000 2.974000 5.552 2.026000 4 <NA> 5.843333 3.057333 3.758 1.199333 Finally, disconnect from the TimesTen Database. > dbCommit (conn) [1] TRUE > dbDisconnect (conn) [1] TRUE We encourage you download Oracle software for evaluation from the Oracle Technology Network. See these links for our software: Times Ten In-Memory Database, ROracle. As always, we welcome comments and questions on the TimesTen and Oracle R technical forums.

Read the article

Using Resources the Right Way

- by BuckWoody

It’s an interesting time in computing technology. At one point there was a dearth of information available for solving a given problem, or educating ourselves on broader topics so that we can solve problems in the future. With dozens, perhaps hundreds or thousands of web sites and content available (for free, in many cases) from vendors, peers, even colleges and universities, it seems like there is actually too much information. Who has the time to absorb all this information and training? Even if you had the inclination, where to start? In fact, it seems so overwhelming that I often hear people saying that they can’t find the training they need, or that vendor X or Y “doesn’t help their users”. On questioning these folks, however, I often find that they – and sometimes I - haven’t put in the effort to learn what resources we have. That’s where blogs, like this one, can help. If you follow a blog, either by checking it often or perhaps subscribing to the Really Simple Syndication (RSS) feed, you’ll be able to spread out the search or create a mental filter for the information you need. But it’s not enough just read a blog or a web page. The creators need real feedback – what doesn’t work, and what does. Yes, you’re allowed to tell a vendor or writer “This helped me because…” so that you reinforce the positives. To be sure, bring up what doesn’t work as well – that’s fine. But be specific, and be constructive. You’d be surprised at how much it matters. I know for a fact at Microsoft we listen – there is a real live person that reads your comments. I’m sure this is true of other vendors, and I also know that most blog authors – yours truly most especially – wants to know what you think. In this blog entry I’d to call your attention to three resources you have at your disposal, and how you can use them to help. I’ll try to bring up things like this from time to time that I find useful, and cover in them in more depth like this. Think of this as a synopsis of a longer set of resources that you can use to filter whether you want to research further, bookmark, or forward on to a circle of friends where you think it might help them. Data Driven Design Concepts http://msdn.microsoft.com/en-us/library/windowsazure/jj156154 I’ll start with a great site that walks you through the process of designing a solution from a data-first perspective. As you know, I believe all computing is merely re-arranging data. If you follow that logic as well, you’ll realize that whenever you create a solution, you should start at the data-end of the application. This resource helps you do that. Even if you don’t use the specific technologies the instructions use, the concepts hold for almost any other technology that deals with data. This should be a definite bookmark for a developer, DBA, or Data Architect. When I mentioned my admiration for this resource here at Microsoft, the team that created it contacted me and asked if I’d share an e-mail address to my readers so that you can comment on it. You’re guaranteed to be heard – you can suggest changes, talk about how useful – or not – it is, and so on. Here’s that address: [email protected] End-to-End Example of a complete Hybrid Application – with Live Demo https://azurestocktrader.cloudapp.net/Default.aspx I learn by example. I also like having ready-made, live, functional demos that show the completed solution at work. If you’ve ever wanted to learn how a complex, complete, hybrid application that bridges on-premises systems with cloud-based databases, code, functions and more, this is it. It’s a stock-trading simulator, and you can get everything from the design to the code itself, or you can just play with the application. It’s running on Windows Azure, the actual production servers we use for everything else. Using a Cloud-Based Service https://azureconfigweb.cloudapp.net/Default.aspx Along with that stock-trading application, you have a full demonstration and usable code sample of a web-based service available. If you’re a developer, this is a style of code you need to understand for everything from iPhone development to a full Service-Oriented Architecture (SOA) environment. So check out these resources. I’ll post more from time to time as I run across them. Hopefully they’ll be as useful to you as they are to me. Oh, and if you have a comment on any of the resources, let them know. And if you have any comments about these or any of my entries, feel free to post away. To quote a famous TV Show: “Hello Seattle – I’m listening…”

Read the article

WEBLOGIC 12C HANDS-ON BOOTCAMP

- by agallego

Oracle PartnerNetwork | Account | Feedback JOIN THE ORACLE WEBLOGIC PARTNER COMMUNITY AND ATTEND A WEBLOGIC 12C HANDS-ON BOOTCAMP Dear partner As a valued partner we would like to invite you for the WebLogic Partner Community and our WebLogic 12c hands-on Bootcamps – free of charge! Please first login at http://partner.oracle.com and then visit: WebLogic Partner Community. (If you need support with your account please contact the Oracle Partner Business Center). The goal of the WebLogic Partner Community is to provide you with the latest information on Oracle's offerings and to facilitate the exchange of experience within community members. Register Now FREE Assessment vouchers to become certified and WebLogic Server 12c 200 new Features and Training Connect and Network WebLogic Blogs WebLogic on Facebook WebLogic on LinkedIn WebLogic on Twitter WebLogic on Oracle Mix WebLogic 12c hands-on Workshops We offer free3 days hands-on WebLogic 12c workshops for Oracle partners who want to become Application Grid Specialized: Register Here! Country Date Location Registration Germany 3-5 April 2012 Oracle Düsseldorf Click here France 24-26 April 2012 Oracle Colombes Click here Spain 08-10 May 2012 Oracle Madrid Click here Netherlands 22-24 May 2012 Oracle Amsterdam Click here United Kingdom 06-08 June 2012 Oracle Reading Click here Italy 19-21 June 2012 Oracle Cinisello Balsamo Click here Portugal 10-12 July 2012 Oracle Lisbon Click here Skill requirements Attendees need to have the following skills as this is required by the product-set and to make sure they get the most out of the training: Basic knowledge in Java and JavaEE Understanding the Application Server concept Basic knowledge in older releases of WebLogic Server would be beneficial Member of WebLogic Partner Community for registration please vist http://www.oracle.com/partners/goto/wls-emea Hardware requirements Every participant works on his own notebook. The minimal hardware requirements are: 4Gb physical RAM (we will boot the image with 2Gb RAM) dual core CPU 15 GB HD Software requirements Please install Oracle VM VirtualBox 4.1.8 Follow-up and certification With the workshop registration you agree to the following next steps Follow-up training attend and pass the Oracle Application Grid Certified Implementation Specialist Registration For details and registration please visit Register Here Free WebLogic Certification (Free assessment voucher to become certified) For all WebLogic experts, we offer free vouchers worth $195 for the Oracle Application Grid Certified Implementation Specialist assessment. To demonstrate your WebLogic knowledge you first have to pass the free online assessment Oracle Application Grid PreSales Specialist. For free vouchers, please send an e-mail with the screenshot of your Oracle Application Grid PreSales certirficate to [email protected] including your Name, Company, E-mail and Country. Note: This offer is limited to partners from Europe Middle East and Africa. Partners from other countries please contact your Oracle partner manager. WebLogic Specialization To become specialized in Application Grid, please make sure that you access the: Application Grid Specialization Guide Application Grid Specialization Checklist If you have any questions please contact the Oracle Partner Business Center. Oracle WebLogic Server 12c Key New Capabilities Java EE 6 and Developer Productivity Simplified Deployment and Management with Virtualization Integrated Traffic Management Enhanced High Availability and Disaster Recovery Much Higher Performance For more information please visit: Presentation from the WebLogic 12c launch Technical Presentation from the WebLogic 12c launch WebLogic OTN Website WebLogic 12c Virtual Conference Environment WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea (OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Best regards, Jürgen Kress WebLogic Partner Adoption EMEA Tel. +49 89 1430 1479 E-Mail: [email protected] Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact PBC | Legal Notices and Terms of Use | Privacy Statement Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States Your privacy is important to us. You can login to your account to update your e-mail subscriptions or you can opt-out of all Oracle Marketing e-mails at any time. Please note that opting-out of Marketing communications does not affect your receipt of important business communications related to your current relationship with Oracle such as Security Updates, Event Registration notices, Account Management and Support/Service communications.

Read the article

Business Case for investing time developing Stubs and BizUnit Tests

- by charlie.mott

I was recently in a position where I had to justify why effort should be spent developing Stubbed Integration Tests for BizTalk solutions. These tests are usually developed using the BizUnit framework. I assumed that most seasoned BizTalk developers would consider this best practice. Even though Microsoft suggest use of BizUnit on MSDN, I've not found a single site listing the justifications for investing time writing stubs and BizUnit tests. Stubs Stubs should be developed to isolate your development team from external dependencies. This is described by Michael Stephenson here. Failing to do this can result in the following problems: In contract-first scenarios, the external system interface will have been defined. But the interface may not have been setup or even developed yet for the BizTalk developers to work with. By the time you open the target location to see the data BizTalk has sent, it may have been swept away. If you are relying on the UI of the target system to see the data BizTalk has sent, what do you do if it fails to arrive? It may take time for the data to be processed or it may be scheduled to be processed later. Learning how to use the source\target systems and investigations into where things go wrong in these systems will slow down the BizTalk development effort. By the time the data is visible in a UI it may have undergone further transformations. In larger development teams working together, do you all use the same source and target instances. How do you know which data was created by whose tests? How do you know which event log error message are whose? Another developer may have “cleaned up” your data. It is harder to write BizUnit tests that clean up the data\logs after each test run. What if your B2B partners' source or target system cannot support the sort of testing you want to do. They may not even have a development or test instance that you can work with. Their single test instance may be used by the SIT\UAT teams. There may be licencing costs of setting up an instances of the external system. The stubs I like to use are generic stubs that can accept\return any message type. Usually I need to create one per protocol. They should be driven by BizUnit steps to: validates the data received; and select a response messages (or error response). Once built, they can be re-used for many integration tests and from project to project. I’m not saying that developers should never test against a real instance. Every so often, you still need to connect to real developer or test instances of the source and target endpoints\services. The interface developers may ask you to send them some data to see if everything still works. Or you might want some messages sent to BizTalk to get confidence that everything still works beyond BizTalk. Tests Automated “Stubbed Integration Tests” are usually built using the BizUnit framework. These facilitate testing of the entire integration process from source stub to target stub. It will ensure that all of the BizTalk components are configured together correctly to meet all the requirements. More fine grained unit testing of individual BizTalk components is still encouraged. But BizUnit provides much the easiest way to test some components types (e.g. Orchestrations). Using BizUnit with the Behaviour Driven Development approach described by Mike Stephenson delivers the following benefits: source: http://biztalkbddsample.codeplex.com – Video 1. Requirements can be easily defined using Given/When/Then Requirements are close to the code so easier to manage as features and scenarios Requirements are defined in domain language The feature files can be used as part of the documentation The documentation is accurate to the build of code and can be published with a release The scenarios are effective to document the scenarios and are not over excessive The scenarios are maintained with the code There’s an abstraction between the intention and implementation of tests making them easier to understand The requirements drive the testing These same tests can also be used to drive load testing as described here. If you don't do this ... If you don't follow the above “Stubbed Integration Tests” approach, the developer will need to manually trigger the tests. This has the following risks: Developers are unlikely to check all the scenarios each time and all the expected conditions each time. After the developer leaves, these manual test steps may be lost. What test scenarios are there? What test messages did they use for each scenario? There is no mechanism to prove adequate test coverage. A test team may attempt to automate integration test scenarios in a test environment through the triggering of tests from a source system UI. If this is a replacement for BizUnit tests, then this carries the following risks: It moves the tests downstream, so problems will be found later in the process. Testers may not check all the expected conditions within the BizTalk infrastructure such as: event logs, suspended messages, etc. These automated tests may also get in the way of manual tests run on these environments.

Read the article

Is your dream an international experience?

- by Maria Sandu

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Studying in Poland, having two summer jobs in England, doing one internship in India, working in Thailand for half a year and now working in Prague. Does it seem an adventure? Well it is and I will tell you how I came to have this international experience. Dzien Dobry! My name is Wojciech Jurojc, I am Polish and I am currently a Business Development Consultant within Oracle, based in Prague. I joined Oracle on the 1st of August 2011. I graduated in 2010 and obtained 2 Masters Degrees in Political Science and Economics. I would like to tell you more about my past and how I joined Oracle. In 2005 I began studying at the Faculty of Political Sciences Gdansk University. In 2008, I obtained a Bachelors Degree. During these three years I had the opportunity to go to England twice, where I worked as a Bartender, first in Blackpool and then in Manchester. This allowed me to improve my language skills and become more confident. In the meantime, I joined the International Student Organization-AIESEC, where I was organized conferences and conducted student projects. Also I met a mass of interesting people from around the world. After graduation in 2008, I was able to get an Internship within a big company in Poland. I worked there as an Intern in the Purchase Department. That was my first adventure within a corporate environment. I learnt a lot about purchasing processes and negotiations. In September 2008, I started studying two Masters Faculties: Political Science and Economics. It was very difficult, but it was not impossible. Over the next two years of studying I was able to go on a three month internship to India where I worked as a Marketing Assistant in an NGO. I was travelling around northern India and did presentations to the academic community about green energy and environmental projects. I had the opportunity to visit Nepal and walked in the Himalayas. That was a huge experience as well as a cultural shock. It taught me how to deal with many problems and to appreciate what I have. At the end of 2009 I was working as a Marketing Assistant for a Leasing company, where I learnt useful sales knowledge and improved my objection handling skills. In July 2010, I graduated with a double Masters and found a job in Thailand as Sales Representative in an IT company. I worked in Thailand until the end of January 2011. Besides that, I was working in an International company with interesting people and I had the opportunity to travel around Thailand and visit Cambodia. After this adventure I started looking for jobs in Europe where I could further develop my sales skills. I found Oracle and I don’t regret this decision which I made. I am currently working in Prague in an international Hardware team and I know that is not the end of my adventures. At this moment, I am working in a team of 12 members. Ten of them are based in Prague and 2 others are based in Russia. We come from different countries such as: Czech Republic, Russia, Ukraine, Turkey, Slovakia and Kazakhstan. I am working on the Polish market, cooperating with our Hardware customers and partners. What do I enjoy the most about my job? I enjoy every challenge that I face in my daily activities as there are always new experiences for me and new things that I learn. As part of Oracle, I gain international exposure and therefore more career opportunities to explore. I have planned my next step for the career path I dream of and I am currently working on it. I recommend you check our Career Page if you’re looking for an international career. If you want to find out more about our job opportunities, follow us on https://campus.oracle.com .

Read the article

Profiling NetBeans 7.0 Beta 2 and Reporting Problems

- by christopher.jones

With NetBeans 7.0 recently going into Beta 2 phase, now is the time to test it out properly and report issues. The development team has been squashing bugs, including memory issues with the PHP bundle.There are some great new PHP related features in NetBeans 7.0, so you know you want to try it out.If you identify something wrong with NetBeans, please report it following the guidelines http://wiki.netbeans.org/IssueReportingGuidelinesDepending on the issues, data to attach to the report is mentioned on: http://wiki.netbeans.org/FaqLogMessagesFile and http://wiki.netbeans.org/FaqProfileMeNowIf you have a memory issue then a memory dump would also be useful. Run the jmap tool for this. There is some background information on http://wiki.netbeans.org/FaqMemoryDump. Here's how I used it.First I set my environment to match the JDK used by NetBeans. In my case I am using a nightly build so the JDK is in the configuration file under $HOME/netbeans-dev-201102210501:$ egrep netbeans_jdkhome $HOME/netbeans-dev-201102210501/etc/netbeans.conf netbeans_jdkhome="/home/cjones/src/jdk1.6.0_24" $ export JAVA_HOME=/home/cjones/src/jdk1.6.0_24 $ export PATH=$JAVA_HOME/bin:$PATH Next, I found the correct process number to examine:$ ps -ef | egrep 'netbeans|jdk'cjones 23230 1 0 16:07 ? 00:00:00 /bin/bash /home/cjones/netbeans-cjones 23438 23230 2 16:07 ? 00:00:09 /home/cjones/src/jdk1.6.0_24/binFinally I used the parent JDK process as the jmap argument:$ jmap -histo:live 23438 num #instances #bytes class name---------------------------------------------- 1: 12075 9028656 [I 2: 49535 6581920 <constMethodKlass> 3: 49535 3964128 <methodKlass> 4: 80256 3840776 <symbolKlass> 5: 36093 3635336 [C 6: 5095 3341312 <constantPoolKlass> 7: 5095 2486016 <instanceKlassKlass> 8: 4325 1961432 <constantPoolCacheKlass> 9: 18729 1763976 [B 10: 59952 1438848 java.util.HashMap$Entry . . .This histogram memory report will help identify the kind of memory issues you are seeing. It may not be as complete as an often tens of megabyte jmap -dump:live,file=/tmp/nbheap.log 23438 heap dump, but is much more easily attached to a bug report.If you want to keep up to date with NetBeans, nightly builds are at: http://bits.netbeans.org/download/trunk/nightly/latest/zip/

Read the article

Windows Phone 8 Announcement

- by Tim Murphy

As if the Surface announcement on Monday wasn’t exciting enough, today Microsoft announce that Windows Phone 8 will be coming this fall. That itself is great news, but the features coming were like confetti flying in all different directions. Given this speed I couldn’t capture every feature they covered. A summary of what I did capture is listed below starting with their eight main features. Common Core The first thing that they covered is that Windows Phone 8 will share a core OS with Windows 8. It will also run natively on multiple cores. They mentioned that they have run it on up to 64 cores to this point. The phones as you might expect will at least start as dual core. If you remember there were metrics saying that Windows Phone 7 performed operations faster on a single core than other platforms did with dual cores. The metrics they showed here indicate that Windows Phone 8 runs faster on comparable dual core hardware than other platforms. New Screen Resolutions Screen resolution has never been an issue for me, but it has been a criticism of Windows Phone 7 in the media. Windows Phone 8 will supports three screen resolutions: WVGA 800 x 480, WXGA 1280 x 768, and 720 1280x720. Hopefully this makes pixel counters a little happier. MicroSD Support This was one of my pet peeves when I got my Samsung Focus. With Windows Phone 8 the operating system will support adding MicroSD cards after initial setup. Of course this is dependent on the hardware company on implementing it, but I think we have seen that even feature phone manufacturers have not had a problem supporting this in the past. NFC NFC has been an anticipated feature for some time. What Microsoft showed today included the fact that they didn’t just want it to be for the phone. There is cross platform NFC functionality between Windows Phone 8 and Windows 8. The demos , while possibly a bit fanciful, showed would could be achieved even in a retail environment. We are getting closer and closer to a Minority Report world with these technologies. Wallet Windows Phone 8 isn’t the first platform to have a wallet concept. What they have done to differentiate themselves is to make it sot that it is not dependent on a SIM type chip like other platforms. They have also expanded the concept beyond just banks to other types of credits such as airline miles. Nokia Mapping People have been envious of the Lumia phones having the Nokia mapping software. Now all Windows Phone 8 devices will use NavTeq data and will have the capability to run in an offline fashion. This is a major step forward from the Bing “touch for the next turn” maps. IT Administration The lack of features for enterprise administration and deployment was a complaint even before the Windows Phone 7 was released. With the Windows Phone 8 release such features as Bitlocker and Secure boot will be baked into the OS. We will also have the ability to privately sign and distribute applications. Changing Start Screen Joe Belfiore made a big deal about this aspect of the new release. Users will have more color themes available to them and the live tiles will be highly customizable. You will have the ability to resize and organize the tiles in a more dynamic way. This allows for less important tiles or ones with less information to be made smaller. And There Is More So what other tidbits came out of the presentation? Later this summer the API for WP8 will be available. There will be developer events coming to a city near you. Another announcement of interest to developers is the ability to write applications at a native code level. This is a boon for game developers and those who need highly efficient applications. As a topper on the cake there was mention of in app payment. On the consumer side we also found out that all updates will be available over the air. Along with this came the fact that Microsoft will support all devices with updates for at least 18 month and you will be able to subscribe for early updates. Update coming for Windows Phone 7.5 customers to WP7.8. The main enhancement will be the new live tile features. The big bonus is that the update will bypass the carriers. I would assume though that you will be brought up to date with all previous patches that your carrier may not have released. There is so much more, but that is enough for one post. Needless to say, EXCITING! del.icio.us Tags: Windows Phone 8,WP8,Windows Phone 7,WP7,Announcements,Microsoft

Read the article

CS, SE, HCI, Information Science, Please recommendation for further education of the former performing art manager seeking career in IT industries? [on hold]

- by Baek Seungjoo

IT specialists there J Thank you very much for your collective efforts here, and I got huge help reading your professional comments and advices on each questions I have searched so far! This time, I would like to ask for your practical advices or recommendation on what I am struggling on at this moment. I am currently seeking higher education for my career transition from performing art manager and director to “IT software and/or service development and management specialist”. However, as this field is quite new to me, and there are lots of different work positions, I have no idea which grad major I better pursue in order to get qualification. Of course I know this question could sounds wired as it is kind of personal choice. But my lack of understanding on how IT software companies work in general, your practical and experience-based advice will be great help to me, who spent more than two months of self-research on net. OK. Before my question, here is my plan and history, which are quite different from those currently in IT industry I think… 1) Target Firstly, get career transition into IT service or products companies and get experiences. Eventually, pursue IT entrepreneurship in combination with my arts and cultural production and business expertise. 2) Background Career: performing arts director and manager in theatre-based scale opera and musical Art education in youth BA in literature and Chinese studies (Art & Humanities) MA in Cultural & Creative Industries (Art & Humanities) – dissertation with focus on digital prosumption and the lived experience of the prosumer. (a qualitative research on the agents in the digital world) 2) Personally Huge interest in IT hardware and software, and their trend. Skills to build up, repair, tune PCs -of course this is no more than personal hobby, but shows my interests in this field. 4) Problem Encounter a question “So, what do you think you can contribute practically in this position”. This question turn me down everytime I go through job interviews, and I decided more education in the relevant area. Here are my questions. 1) In terms of work positions in IT software companies, I wonder if I can put the comparison of what “Artists” is to “Arts Manager or Director” is what “Developer” is to “Product Manager”. (Of course, this stereotypical division of Artist-Art Manager is out of sense because the domain overlaps to some extent, and is blurring at least in my field, and they are in different contexts, but just speaking easily.) Normally, artist comes with special arts educations, and they live in their own world of artistic inspiration and creation, and they feel alive in practice and on stages. Meanwhile, from the point of staging and managing productions, the role of art manager is critical as well. Our role cares how the production appeals to the audience in effective way, how to make profit and future sustainable management through that, how to set up future strategy in consideration of the external conditions such as political and social circumstances, audience trend and level, other production trends from on-going and historical perspectives, how and what the production make voice to the society from political, economic, humanitarian stances. So, we need keen eyes on economic, political, and societal environment, have to understand human-being and their desires, must know how to make presentation and attract investors, must have sense in managing and fighting over the limited financial resource, how to extend networking and so on. It is common that the two agents create productions in collaboration (normally not in that ideal way but in conflict and fight though J ). So, we need to know each other’s expertise to some extent, for better production. What are the work positions in IT software industries equivalent to the role of “art manager” in performing arts? From my view, considering developers come with special education in the world of computer science, software engineering, or others (self-education sometimes), and they express themselves with the arts of coding, computer languages on the black screen, and make sort of their artistic production online to the audience, I guess there might be someone who collaborate with developers in creating, managing, and launching IT services or products. 2) Which education among CS, SE, HCI, Information Science, is needed for those seeking such work position? Especially for person like me. (At this moment, Information Science has the highest possibility to get in, since I lack Calculus and Math in undergrad educaiton. But please let me know irrespective of this concern, I think there are ways to back it up if CS or SE education needed in my case) 3) Which field between Information Science and HCI can be more practical background regarding job hungting? And which of them have more demands in job market? AS I checked, HCI is more close to CS than IS in its focus of study area. Thank you very much for your patience reading such a long inquiry, and I appreciate to your efforts in advance. Have a nice day in this beautiful summer.

Search Results

Search found 11195 results on 448 pages for 'disconnected environment'.

Page 412/448 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419 | Next Page >

- by sachinghalot

- by MarkPearl

- by Kevin Grossnicklaus

- by Tarun Arora

- by PeterTweed

- by Sam Drake

- by rbishop

- by Jeff

- by Carnotaurus

- by Carlos Chang

- by D'Arcy Lussier

- by Mark Rackley

- by tom

- by Tim Murphy

- by Robert May

- by John K. Hines

- by lmestre

- by Sherry LaMonica

- by BuckWoody

- by agallego

- by charlie.mott

- by Maria Sandu

- by christopher.jones

- by Tim Murphy

- by Baek Seungjoo

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419 | Next Page >