disconnected environment - Page 411

Oracle Fusion Middleware 11g next launch phase - what a week of product releases! Feedback from our

- by Jürgen Kress

Product releases: SOA Suite 11gR1 Patch Set 2 (PS2) BPM Suite 11gR1 Released Oracle JDeveloper 11g (11.1.1.3.0) (Build 5660) Oracle WebLogic Server 11gR1 (10.3.3) Oracle JRockit (4.0) Oracle Tuxedo 11gR1 (11.1.1.1.0) Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) for Linux x86/x86-64 All Oracle Fusion Middleware 11gR1 Software Download BPM Suite 11gR1 Released by Manoj Das Oracle BPM Suite 11gR1 became available for download from OTN and eDelivery. If you have been following our plans in this area, you know that this is the release unifying BEA ALBPM product, which became Oracle BPM10gR3, with the Oracle stack. Some of the highlights of this release are: BPMN 2.0 modeling and simulation Web based Process Composer for BPMN and Rules authoring Zero-code environment with full access to Oracle SOA Suite’s rich set of application and other adapters Process Spaces – Out-of-box integration with Web Center Suite Process Analytics – Native process cubes as well as integration with Oracle BAM You can learn more about this release from the documentation. Notes about downloading and installing Please note that Oracle BPM Suite 11gR1 is delivered and installed as part of SOA 11.1.1.3.0, which is a sparse release (only incremental patch). To install: Download and install SOA 11.1.1.2.0, which is a full release (you can find the bits at the above location) Download and install SOA 11.1.1.3.0 During configure step (using the Fusion Middleware configuration wizard), use the Oracle Business Process Management template supplied with the SOA Suite11g (11.1.1.3.0) If you plan to use Process Spaces, also install Web Center 11.1.1.3.0, which also is delivered as a sparse release and needs to be installed on top of Web Center 11.1.1.2.0 SOA Suite 11gR1 Patch Set 2 (PS2) released by Demed L'Her We just released SOA Suite 11gR1 Patch Set 2 (PS2)! You can download it as usual from: OTN (main platforms only) eDelivery (all platforms) 11gR1 PS2 is delivered as a sparse installer, that is to say that it is meant to be applied on the latest full install (11gR1 PS1). That’s great for existing PS1 users who simply need to apply the patch and run the patch assistant – but an extra step for new users who will first need to download SOA Suite 11gR1 PS1 (in addition to the PS2 patch). What’s in that release? Bug fixes of course but also several significant new features. Here is a short selection of the most significant ones: Spring component (for native Java extensibility and integration) SOA Partitions (to organize and manage your composites) Direct Binding (for transactional invocations to and from Oracle Service Bus) HTTP binding (for those of you trying to do away with SOAP and looking for simple GET and POST) Resequencer (for ordering out-of-order messages) WS Atomic Transactions (WS-AT) support (for propagation of transactions across heterogeneous environments) Check out the complete list of new features in PS2 for more (including links to the documentation for the above)! But maybe even more importantly we are also releasing Oracle Service Bus 11gR1 and BPM Suite 11gR1 at the same time – all on the same base platform (WebLogic Server 10.3.3)! (NB: it might take a while for all pages and caches to be updated with the new content so if you don’t find what you need today, try again soon!) Are you Systems Integrations and Independent Software Vendors ready to adopt and to deliver? Make sure that you become trained: Local training calendars Register for the SOA Partner Community & Webcast www.oracle.com/goto/emea/soa What is your feedback? Who installed the software? please feel free to share your experience at http://twitter.com/soacommunity #soacommunity Technorati Tags: SOA partner community ACE Directoris SOA Suite PS2 BPM11g First feedback from our ACE Directors and key Partners: Now, these are great times to start the journey into BPM! Hajo Normann Reuse of components across the Oracle 11G Fusion Middleware stack, BPM just is one of the components plugging into the stack and reuses all other components. Mr. Leon Smiers With BPM11g, Oracle offers a very competitive product which will have a big effect on the IT market. Guido Schmutz We have real BPMN 2.0, which get's executed. No more transformation from business models to executable models - just press the run button... Torsten Winterberg Oracle BPM Suite 11g brings Out-of-box integration with WebCenter Suite and Oracle ADF development framework. Andrejus Baranovskis With the release of BPM Suite 11g, Oracle has defined new standards for Business Process platforms. Geoffroy de Lamalle With User Messaging Service you can let Soa Suite 11g do all your Messaging Edwin Biemond

Read the article

Solaris 11 Live CD alapú telepítés

- by AndrasF

Az elozo részben megigért két telepítési eljárás helyett kénytelen vagyok ebben a bejegyzésben kizárólag a Live CD-s változattal foglalkozni. Korábban nem gondoltam, hogy ennek bemutatása is több, mint 50 képernyo kimenetet igényel, ezért változtatnom kellett a korábbi tervezeten. A Solaris 11 Live CD-s telepítés elsosorban az asztali (desktop) felhasználók igényeit veszi figyelembe és kizárólag x86-os architektúrájú gépeken támogatott (annak ellenére, hogy SPARC-os rendszerek is rendelkeznek grafikus kártyával - pl. T4-1).A folyamat két részre bontható: eloször a vendéggép kerül kialakítása VirtualBox környezetben, majd ezt követi a Solaris 11-es telepítése virtuális gépre. HCL és segédprogramok (DDT, DDU) Mielott telepíteni szeretnénk a Solaris operációs rendszert, célszeru tájékozódni fizikai rendszerünk támogatottságáról. Erre jól használható a már említett hardver kompatibilitási (HCL) lista, vagy az alábbi két segédprogram: Device Detection Tool Device Driver Utility Mindkét alkalmazás képes rendszerünk hardver komponenseit feltérképezni és ellenorizni azok meghajtóprogram (driver) ellátottságát. Eltérés köztük abban nyilvánul meg, hogy míg a DDT futtatásához Java szükséges, addig a DDU Solarist igényel. Ez utóbbiról a telepítés során röviden szó fog esni. Telepíto készletek letöltési helye Hálózati installációtól eltekintve (*) telepítokészletre van szükségünk, mely az alábbi oldalról töltheto le. Célszeru letöltenünk mindhárom állományt és a csomagokat tartalmazó ún. repository médiát (a következo felsorolás utolsó eleme) is: sol-11-1111-live-x86.iso sol-11-1111-text-x86.iso sol-11-1111-ai-x86.iso sol-11-1111-repo-full.iso Az elso három változat indítható USB formátumban is rendelkezésre áll - ekkor iso végzodés helyett usb található a fájlnevek végén. Rövid utalást az egyes készletek feladatáról az elozo blog bejegyzés tartalmaz (link). Amennyiben SPARC architektúrájú rendszerre szeretnénk a telepítést végezni, 'x86' helyett a 'sparc' szöveget tartalmazó állományokra lesz szükség. (*) - arra is lehetoség van, hogy AI készletrol történo indítás segítségével végezzük a hálózaton keresztül történo telepítést. Ez akkor fontos, ha célgépünkön nincs PXE (Preboot Execution Environment) boot támogatás. VirtualBox konfigurálás Külön fizikai eszköz felhasználása nélkül virtuális környezetben is használható a Solaris 11, mint vendéggép. A VirtualBox használatával erre kényelmes lehetoség kínálkozik. Gazdagépünknek (Windows, Unix, Linux) megfelelo telepíto program, vagy programcsomag (jelenleg a 4.1.16-os verzió a legfrissebb változat) és az installációt is taglaló felhasználói kézikönyv letöltheto a termék oldaláról. A sikeres telepítést követoen az alábbi lépések során jutunk el az új virtuális gép kialakulásáig: 1. A VBox indítása után a központi ablak megmutatja a már létezo virtuális gépeinket (Sol11demo, Sol11u1b07, Sol11.1B16, Sun_ZFS_Storage_7000) és az aktuálisan kiválasztott egyed (Sol11demo) fobb jellemzoit (megnevezés, memória mérete, virtuális tároló eszközök listája...stb.) 2. A New gombra kattintva elindul a virtuális gépet létrehozó segéd (wizard) 3. Ezt követoen nevet kell adnunk a vendéggépnek és ki kell választanunk az operációs rendszer típusát (beszédes név használata esetén a VirtualBox képes az operációs rendszer családját kiválasztani, nekünk pusztán csak verziót kell beállítanunk): adjuk meg Solaris11-et névként és válasszuk a 64bites változatot (feltéve, hogy gazdagépünk támogatja ezt) 4. Telepítéshez és a kezdeti lépések megtételéhez 1536MB memória tökéletesen megfelel (ez késobb módosítható az elvárások függvényében) 5. Fizikai társaihoz hasonlóan, egyetlen virtuális gép sem létezhet merevlemez (jelen esetben virtuális diszk) nélkül. Használhatunk egy már létezo területet (virtuális lemezt tartalmazó állomány), de létrehozhatunk egy nekünk tetszo új példányt is. Maradjunk ez utóbbinál (Create new hard disk)! 6. A lehetséges formátumok közül - az egyszeruség okán - éljünk a felkínált alaptípussal (VDI - VirtualBox Disk Image). 7. Létrehozás során a virtuális lemez készülhet egyidejuleg (Fixed size), vagy több lépésben dinamikusan (Dynamically allocated). Az elso változat sokkal kevésbé terheli a rendszert, a második elonye pedig a helytakarékosság. Válasszuk a fix méretu változatot. 8. Most már csak egyetlen adat ismeretlen a VirtualBox számára, mégpedig a létrehozásra kerülo virtuális lemez nagysága. 8GB-os terület jelen esetben alkalmas az ismerkedés elkezdéséhez. 9. Amennyiben minden beállítást helyesen adtunk meg, a Create gomb megnyomása után elindul a virtuális lemez létrehozása. 10. Ez a muvelet a megadott adatoktól függoen néhány perc alatt befejezodik. 11. Hasonló megerosítés (Create gomb aktiválása) után elkezdodik a kért virtuális gép létrehozása is. 12. Sikeres végrehajtás után az új vitruális gép közvetlenül megjelenik a központi ablak baloldali listáján a rendelkezésre álló virtuális gépek közt. A blog bejegyzés folyamatosan frissül...a rész fennmaradó tartalma hamarosan felkerül az oldalra.

Read the article

The Oracle Graduate Experience...A Graduates Perspective by Angelie Tierney

- by david.talamelli

[Note: Angelie has just recently joined Oracle in Australia in our 2011 Graduate Program. Last week I shared my thoughts on our 2011 Graduate Program, this week Angelie took some time to share her thoughts of our Graduate Program. The notes below are Angelie's overview from her experience with us starting with our first contact last year - David Talamelli] How does the 1 year program work? It consists of 3 weeks of training, followed by 2 rotations in 2 different Lines of Business (LoB's). The first rotation goes for 4 months, while your 2nd rotation goes for 7, when you are placed into your final LoB for the program. The interview process: After sorting through the many advertised graduate jobs, submitting so many resumes and studying at the same time, it can all be pretty stressful. Then there is the interview process. David called me on a Sunday afternoon and I spoke to him for about 30 minutes in a mini sort of phone interview. I was worried that working at Oracle would require extensive technical experience, but David stressed that even the less technical, and more business-minded person could, and did, work at Oracle. I was then asked if I would like to attend a group interview in the next weeks, to which I said of course! The first interview was a day long, consisting of a brief introduction, a group interview where we worked on a business plan with a group of other potential graduates and were marked by 3 Oracle employees, on our ability to work together and presentation. After lunch, we then had a short individual interview each, and that was the end of the first round. I received a call a few weeks later, and was asked to come into a second interview, at which I also jumped at the opportunity. This was an interview based purely on your individual abilities and would help to determine which Line of Business you would go to, should you land a graduate position. So how did I cope throughout the interview stages? I believe the best tool to prepare for the interview, was to research Oracle and its culture and to see if I thought I could fit into that. I personally found out about Oracle, its partners as well as competitors and along the way, even found out about their part (or Larry Ellison's specifically) in the Iron Man 2 movie. Armed with some Oracle information and lots of enthusiasm, I approached the Oracle Graduate Interview process. Why did I apply for an Oracle graduate position? I studied a Bachelor of Business/Bachelor of Science in IT, and wanted to be able to use both my degrees, while have the ability to work internationally in the future. Coming straight from university, I wasn't sure exactly what I wanted to do in terms of my career. With the program, you are rotated across various lines of business, to not only expose you to different parts of the business, but to also help you to figure out what you want to achieve out of your career. As a result, I thought Oracle was the perfect fit. So what can an Oracle ANZ Graduate expect? First things first, you can expect to line up for your visitor pass. Really. Next you enter a room full of unknown faces, graduates just like you, and then you realise you're in this with 18 other people, going through the same thing as you. 3 weeks later you leave with many memories, colleagues you can call your friends, and a video of your presentation. Vanessa, the Graduate Manager, will also take lots of photos and keep you (well) fed. Well that's not all you leave with, you are also equipped with a wealth of knowledge and contacts within Oracle, both that will help you throughout your career there. What training is involved? We started our Oracle experience with 3 weeks of training, consisting of employee orientation, extensive product training, presentations on the various lines of business (LoB's), followed by sales and presentation training. While there was potential for an information overload, maybe even death by Powerpoint, we were able to have access to the presentations for future reference, which was very helpful. This period also allowed us to start networking, not only with the graduates, but with the managers who presented to us, as well as through the monthly chinwag, HR celebrations and even with the sharing of tea facilities. We also had a team bonding day when we recorded a "commercial" within groups, and learned how to play an Irish drum. Overall, the training period helped us to learn about Oracle, as well as ourselves, and to prepare us for our transition into our rotations. Where to now? I'm now into my 2nd week of my first graduate rotation. It has been exciting to finally get out into the work environment and utilise that knowledge we gained from training. My manager has been a great mentor, extremely knowledgeable, and it has been good being able to participate in meetings, conference calls and make a contribution towards the business. And while we aren't necessarily working directly with the other graduates, they are still reachable via email, Pidgin and lunch and they are important as a resource and support, after all, they are going through a similar experience to you. While it is only the beginning, there is a lot more to learn and a lot more to experience along the way, especially because, as we learned during training, at Oracle, the only constant is change.

Read the article

Visual Studio & TFS 11 – List of extensions and upgrades

- by terje

This post is a list of the extensions I recommend for use with Visual Studio 11. It’s coming up all the time – what to install, where are the download sites, last version, etc etc, and thus I thought it better to post it here and keep it updated. The basics are Visual Studio 11 connected to a Team Foundation Server 11. Note that we now are at Beta time, and that also many live in a side-by-side environment with Visual Studio 2010. The side-by-side is supported by VS 11. However, if you installed a component supporting VS11 before you installed VS11, then you need to reinstall it. The VSIX installer will understand that it is to apply those only for VS11, and will not touch – nor remove – the same for VS2010. A good example here is the Power Commands. The list is more or less in priority order. The focus is to get a setup which can be used for a complete coding experience for the whole ALM process. The list of course reflects what I use for my work , so it is by no means complete, and for some of the tools there are equally useful alternatives. Many components have not yet arrived with VS11 support. I will add them as they arrive. The components directly associated with Visual Studio from Microsoft should be common, see the Microsoft column. If you still need the VS2010 extensions, here they are: The extensions for VS 2010. Components ready for VS 11, both upgrades and new ones Product Notes Latest Version License Applicable to Microsoft TFS Power Tools Beta 111 Side-by-side with TFS 2010 should work, but remove the Shell Extension from the TFS 2010 power tool first. March 2012(11.0.50321.0) Free TFS integration Yes ReSharper EAP for Beta 11 (updates very often, nearly daily) 7.0.3.261 pr. 16/3/2012 Free as EAP, Licensed later Coding & Quality No Power Commands1 Just reinstall, even if you already have it for VS2010. The reinstall will then apply it to VS 11 1.0.2.3 Free Coding Yes Visualization and Modelling SDK for beta Info here and here. Another download site and info here. Also download from MSDN Subscription site. Requires VS 11 Beta SDK 11 Free now, otherwise Part of MSDN Subscription Modeling Yes Visual Studio 11 Beta SDK Published 16.2.2012 Yes Visual Studio 11 Feedback tool1 Use this to really ease the process of sending bugs back to Microsoft. 1.1 Free as prerelase Visual Studio Yes #1 Get via Visual Studio’s Tools | Extension Manager (or The Code Gallery). (From Adam : All these are auto updated by the Extension Manager in Visual Studio) #2 Works with ultimate only Components we wait for, not yet in a VS 11 version Product Notes Latest Version License Applicable to Microsoft Coding Yes Inmeta Build Explorer Free TFS integration No Build Manager Community Build Manager. Info here from Jakob Free TFS Integration No Code Contracts Coming real soon Free Coding & Quality Yes Code Contracts Editor Extensions Free Coding & Quality Yes Web Std Update Free Coding (Web) Yes (MSFT) Web Essentials Free Coding (Web) Yes (MSFT) DotPeek It says up to .Net 4.0, but some tests indicates it seems to be able to handle 4.5. 1.0.0.7999 Free Coding/Investigation No Just Decompile Also says up to .net 4.0 Free Coding/Investigation No dotTrace Licensed Quality No NDepend Licensed Quality No tangible T4 editor Lite version Free (Good enough) Coding (T4 templates) No Pex Moles are now integrated and improved in VS 11 as a new library called Fakes. Coding & Unit Testing Yes Components which are now integrated into VS 11 Product Notes Productivity Power Tools Features integrated into VS11, with a few exceptions, I don’t think you will miss those. Fakes Was Moles in 2010. Fakes is improved and made into a product. NuGet Manager Included in the install, but still an extension package. Info here. Product installation, upgrades and patches for VS/TFS 11 Product Notes Date Applicable to Visual Studio 11 & TFS 11 Beta This is the beta release, and you are free to download and try it out. March 2012 Visual Studio and TFS SQL Server 2008 R2 SP1 Cumulative Update 4 The TFS 11 requires the CU1 at least, but you should go up to at least CU4, since this update solves a ghost record problem that otherwise may cause your TFS database to not release records the way it should when you clean it up, see this post for more information on that issue. Oct 2011 SQL Server 2008 R2 SP1

Read the article

RDA Health Checks for SOA

- by ShawnBailey

What is a health check in RDA? A health check evaluates something in your environment to determine whether a change needs to be considered in order to avoid a problem or optimize fuctionality. Examples of what this 'something' might be are: Configuration Parameters JVM Options Runtime Statistics What have we done for SOA? In the latest release of RDA, 4.30, we have added a Rule Set for SOA called 'Oracle SOA 11g (11.1.1) Post Installation (Generic)'. This Rule Set contains 14 SOA related health checks. These checks were all derived from common issues / solutions we see in support of the SOA product. Many of the recommendations come from the product documentation while others are covered in the SOA Knowledge Base. Our goal is that you will be able to easily identify the areas of concern and understand the guidance available from the output of the Rule Set. Running the health checks for SOA The rules that the checks use are installed with RDA and bundled by product or functional area into what are called 'Rule Sets'. To view the available Rule Sets simply run the command from the RDA home location: rda.cmd (or .sh) -dT hcve This will bring up a list of the available HCVE (Health Check / Verification Engine) Rule Sets. Each Rule Set contains a group of related rules that are used for evalutation and display of results. A rule can be considered synonymous with a single health check and they are assigned an ID, Name and Description that can be seen when they are executed. The Rule Set for SOA is option number 11 and you just enter this selection at the prompt. The Rule Set will then execute to completion. After running an HCVE Rule Set the tool will write the output to the RDA_HOME/output folder. The simplest way to view the output is to drag the .htm file to a browser but of course it can also be uploaded to a Service Request for evaluation by Oracle Support. Many of the Rule Sets will prompt you for information before they can execute their rules but the SOA Rule Set will identify the SOA domains configured in your RDA setup.cfg file. This means that you don't need to answer all of the questions again about where stuff is but it also means that you must have configured RDA for SOA. To run the Rule Set: Download the latest version of RDA from MOS Doc ID 314422.1 Configure RDA for your SOA domains. Detailed steps can be found here In it's simplest form the command is 'rda.cmd (.sh) -S SOA' Go to the RDA home location and enter the command 'rda.cmd (or .sh) -dT hcve' Select option '11' It should be noted that this our first release of a SOA Rule Set so there will probably be some things we need to clean up or fix. None of these rules will actually modify anything on your system as they are read only and do the evaluations internally. Please let us know if you have any issues with the rules or ideas for new ones so we can make them as useful as possible. The Checks Here is a list of the SOA health checks by ID, Name and Description. ID Name Description A00100 SOA Domain Homes Lists the SOA domains that were indentified from the RDA setup.cfg file A00200 Coherence Protocol Conflict Checks to see if you have both Unicast and Multicast configured in the same domain. Checks both the setDomainEnv and config.xml entries (if it exists). We recommend Unicast with fully qualified host names or IP addresses. A00210 Coherence Fully Qualified Host Checks that the host names are fully qualified or that IP addresses are used. Will fail if unqualified host names are detected. A00220 Unicast Local Host Checks that the Coherence localhost is specified for use with Unicast A00300 JTA Timeout Checks that the JTA timeout is configured for the domain and lists the value. The bundled rule will only list the current values of the JTA timeout for each SOA Domain. In the future the rule with fail with a warning if the value is 300 seconds or lower. It is recommended that timeouts follow the pattern 'syncMaxWaitTime' < EJB Timeouts < JTA Timeout. The 300 second value is important because the EJB Timeouts default to 300 seconds. Additional information can be found in MOS Doc ID 880313.1. A00310 XA Max Time Checks that the JTA Maximum XA call time is set for the domain. Fails if it is not explicitly set or if the value is less than or equal to the default of 12000 ms. A00320 XA Timeout Checks that the XA timeout is enabled and that the value is '0' for the SOA Data Source (SOADataSource-jdbc.xml) A00330 JDBC Statement Timeout Checks that the Statement Timeout is set for all SOA Data Sources. Fails if the value is not set or if it is set to the default of -1. A00400 XA Driver Checks that the SOA Data Source is configured to use an XA driver. Fails if it is not. A00410 JDBC Capacity Settings Checks that the minimum and maximum capacity are equal for all SOA Data Sources. Fails if they are not and lists specifically which data sources failed. A00500 SOA Roles Checks that the default SOA roles 'SOAAdmin' and 'SOAOperator' are configured for the soa-infra application in the file sytem-jazn-data.xml. Fails if they are not. A00700 SOA-INFRA Deployment Checks that the soa-infra application is deployed to either a cluster, all members of a cluster or a stand alone server. A00710 SOA Deployments Checks that the SOA related applications are deployed to the same domain members as soa-infra. A00720 SOA Library Deployments Checks that the SOA related libraries are deployed to the same domain members as soa-infra. A00730 Data Source Deployments Checks that the SOA Data Sources are all targeted to the same domain members as soa-infra

Read the article

The first day of JavaOne is already over!

- by delabassee

In the past Sunday used to be a more relaxing day with ‘just’ some JavaOne activities going on. Sunday used to be a soft day to prepare yourself for an exhausting week. This is now over as JavaOne is expanding; Sunday is now an integral part of the conference. One of the side effect of this extra day is that some activities related to JavaOne and OpenWorld such as MySQL Connect are being push to start a day earlier on Saturday (can you spot the pattern here?). On the GlassFish front, Sunday was a very busy day! It started at the Moscone Center with the annual GlassFish Community Event where the Java EE 7 and GF 4 roadmaps were presented and discussed. During the event, different GlassFish users such as ZeroTurnaround (the JRebel guys), Grupo RBS and IDR Solutions shared their views on GF, why they like GF but also what could be improved. The event was also a forum for the GF community to exchange with some of the key Java EE / GlassFish Oracle Executives and the different GF team members. The Strategy keynote and the Technical keynote were held in the Masonic Auditorium later in the after-noon. Oracle executives have presented the plans for Java SE, Java FX and Java EE. As on-demand replays will be available soon, I will not summarize several hours of content but here are some personal takeaways from those keynotes. Modularity Modularity is a big deal. We know by now that Project Jigsaw will not be ready for Java SE 8 but in any case, it is already possible (and encouraged) to test Jigsaw today. In the future, Java EE plan to rely on the modularity features provided by Java SE, so Project Jigsaw is also relevant for Java EE developers. Shorter term, to cover some of the modular requirements, Java SE will adopt the approach that was used for Java EE 6 and the notion of Profiles. This approach does not define a module system per say; Profiles is a way to clearly define different subsets of Java SE to fulfill different needs (e.g. the full JRE is not required for a headless application). The introduction of different Profiles, from the Base profile (10mb) to the Full Profile (+50mb), has been proposed for Java SE 8. Embedded Embedded is a strong theme going forward for the Java Plaform. There is now a dedicated program : Java Embedded @ JavaOne Java by nature (e.g. platform independence, built-in security, ability easily talks to any back-end systems, large set of skills available on the market, etc.) is probably the most suited platform for the Internet of Things. You can quickly be up-to-speed and develop services and applications for that space just by using your current Java skills. All you need to start developing on ARM is a 35$ Raspberry Pi ARM board (25$ if you are cheap and can live without an ethernet connection) and the recently released JDK for Linux/ARM. Obviously, GlassFish runs on Raspberry Pi. If you wan to go further in the embedded space, you should take a look Java SE Embedded, an optimized, low footprint, Java environment that support the major embedded architectures (ARM, PPC and x86). Finally, Oracle has recently introduced Java Embedded Suite, a new solution that brings modern middleware capabilities to the embedded space. Java Embedded Suite is an optimized solution that leverage Java SE Embedded but also GlassFish, Jersey and JavaDB to deploy advanced value added capabilities (eg. sensor data filtering and) deeper in the network, closer to the devices. JavaFX JavaFX is going strong! Starting from Java SE 7u6, JavaFX is bundled with the JDK. JavaFX is now available for all the major desktop platforms (Windows, Linux and Mac OS X). JavaFX is now also available, in developer preview, for low end device running Linux/ARM. During the keynote, JavaFX was shown running on a Raspberry Pi! And as announced during the keynote, JavaFX should be fully open-sourced by the end of the year; contributions are welcome!. There is a strong momentum around JavaFX, it’s the ideal client solution for the Java platform. A client layer that works perfectly with GlassFish on the back-end. If you were not convince by JavaFX, it’s time to reconsider it! As an old Chinese proverb say “One tweet is worth a thousand words!” HTML5, Project Avatar and Java EE 7 HTML5 got a lot of airtime too, it was covered during the Java EE 7 section of the keynote. Some details about Project Avatar, Oracle’s incubator project for a TSA (Thin Server Architecture) solution, were diluted and shown during the keynote. On the tooling side, Project Easel running on NetBeans 7.3 beta was demo’ed, including a cool NetBeans debugging session running in Chrome! HTML 5, Project Avatar and Java EE 7 deserve separate posts... Feedback We need your feedback! There are many projects, JSRs and products cooking : GlassFish 4, Project Jigsaw, Concurrency Utilities for Java EE (JSR 236), OpenJFX, OpenJDK to name just a few. Those projects, those specifications will have a profound impact on the Java platform for the years to come! So if you have the opportunity, download, install, learn, tests them and give feedback! Remember, you can "Make the Future Java!" Finally, the traditional GlassFish Party at the Thirsty Bear concluded the first JavaOne day. This party is another place where the community can freely exchange with the GlassFish team in a more relaxed, more friendly (but sometime more noisy) atmosphere. Arun has posted a set of pictures to reflect the atmosphere of the keynotes and the GlassFish party. You can find more details on the others Java EE and GlassFish activities here.

Read the article

Goals for 2010 Retrospective

- by Brian Jackett

As we approach the end of 2010 I’d like to take a few minutes to reflect back on this past year and revisit the goals that I set for myself at the beginning of the year (click here to see those goals). I feel it is important to track your goals not only to see if you accomplished them but also to see what new directions in life you pursued. Once we enter into 2011 I’ll follow up with a new post on goals for the new year. Professional Blog – This year I intended to write at least 2 posts a month. Looking back I far surpassed that goal by writing 47 posts (this one being my 48th). As with many things in life, quantity does not mean quality. A good example is a number of my posts announcing upcoming speaking engagements and providing links to presentation slides and scripts. That aside, I like to at least keep content relatively fresh on this blog which I was able to accomplish. At the same time I’ve gotten much more comfortable in my blogging style and it has become much easier to write. Speaking – I didn’t define a clear goal for speaking engagements, but had a rough idea of wanting to speak at 2-3 events. Once again I far exceeded that number by speaking at 10 separate events and delivering 12+ presentations. I’m very thankful for all of the opportunities that I was given and all of the wonderful people I have met as a result. Volunteering – This year I intended to help out with the COSPUG (now Buckeye SPUG) steering committee and Stir Trek conference. I fulfilled both goals and as well as taking on lead organizer duties for the first ever SharePoint Saturday Columbus. Each of these events and groups turned out to be successful and I was glad to be a part of them all. I look forward to continuing to volunteer with each next year in some capacity. Android Development – My goal for getting into Android development was a late addition, but one I didn’t necessarily fulfill. I spent a couple nights downloading the tools, configuring my environment, and going through some “simple” tutorials. I say “simple” because in my opinion the tutorials were not laid out very well, took a long time to get running properly, and confused me more than helped. After about a week I was frustrated with the process and didn’t think it was a good use of my time. On a side note, I’ve dabbled in Windows Phone 7 development over the past few months and have been very excited by how easy and intuitive it was to get started and develop some proof of concepts. Personal Getting in Shape – I had intended to play on recreational sports leagues and work out on a semi-regular basis. For the most part I fulfilled this goal by playing on various softball and volleyball leagues as well as using the gym. At the same time I had some major setbacks. In the spring I badly sprained my ankle and got hit in the knee with a softball which kept me inactive for almost 2 months. More recently I broke my knuckle (click here to read about it) which I am still recovering from. Volunteering – On the volunteering front I kept my commitments at my parish’s high school youth group. As for other volunteering opportunities I got involved with a great organization called Columbus Gives Back (website). I’ve volunteered with them a few times and really enjoy their goal to provide opportunities to people with busy schedules. They offer a variety of events typically after work hours and spread out around Columbus with no set commitments on time you need to put in. If you have the time or motivation I highly recommend them. House/Condo – I had been thinking of buying a house or condo this past summer, but decided to extend my apartment lease for another year instead. I have begun the search for a place in the past few weeks and am excited begin the process of owning a home. Conclusion This year I was able to set and achieve many of my goals. For next year I’ll try to put more specific numbers to all of my goals. If any of you readers set goals for 2011 feel free to send me a link as I’d love to see what you are aiming to accomplish. Have a great end of 2010 and best wishes for the start of 2011! -Frog Out

Read the article

Where Facebook Stands Heading Into 2013

- by Mike Stiles

In our last blog, we looked at how Twitter is positioned heading into 2013. Now it’s time to take a similar look at Facebook. 2012, for a time at least, seemed to be the era of Facebook-bashing. Between a far-from-smooth IPO, subsequent stock price declines, and anxiety over privacy, the top social network became a target for comedians, politicians, business journalists, and of course those who were prone to Facebook-bash even in the best of times. But amidst the “this is the end of Facebook” headlines, the company kept experimenting, kept testing, kept innovating, and pressing forward, committed as always to the user experience, while concurrently addressing monetization with greater urgency. Facebook enters 2013 with over 1 billion users around the world. Usage grew 41% in Brazil, Russia, Japan, South Korea and India in 2012. In the Middle East and North Africa, an average 21 new signups happen per minute. Engagement and time spent on the site would impress the harshest of critics. Facebook, while not bulletproof, has become such an integrated daily force in users’ lives, it’s getting hard to imagine any future mass rejection. You want to see a company recognizing weaknesses and shoring them up. Mobile was a weakness in 2012 as Facebook was one of many caught by surprise at the speed of user migration to mobile. But new mobile interfaces, better mobile ads, speed upgrades, standalone Messenger and Pages mobile apps, and the big dollar acquisition of Instagram, were a few indicators Facebook won’t play catch-up any more than it has to. As a user, the cool thing about Facebook is, it knows you. The uncool thing about Facebook is, it knows you. The company’s walking a delicate line between the public’s competing desires for customized experiences and privacy. While the company’s working to make privacy options clearer and easier, Facebook’s Paul Adams says data aggregation can move from acting on what a user is engaging with at the moment to a more holistic view of what they’re likely to want at any given time. To help learn about you, there’s Open Graph. Embedded through diverse partnerships, the idea is to surface what you’re doing and what you care about, and help you discover things via your friends’ activities. Facebook’s Director of Engineering, Mike Vernal, says building mobile social apps connected to Facebook in such ways is the next wave of big innovation. Expect to see that fostered in 2013. The Facebook site experience is always evolving. Some users like that about Facebook, others can’t wait to complain about it…on Facebook. The Facebook focal point, the News Feed, is not sacred and is seeing plenty of experimentation with the insertion of modules. From upcoming concerts, events, suggested Pages you might like, to aggregated “most shared” content from social reader apps, plenty could start popping up between those pictures of what your friends had for lunch. As for which friends’ lunches you see, that’s a function of the mythic EdgeRank…which is also tinkered with. When Facebook changed it in September, Page admins saw reach go down and the high anxiety set in quickly. Engagement, however, held steady. The adjustment was about relevancy over reach. (And oh yeah, reach was something that could be charged for). Facebook wants users to see what they’re most likely to like, based on past usage and interactions. Adding to the “cream must rise to the top” philosophy, they’re now even trying out ordering post comments based on the engagement the comments get. Boy, it’s getting competitive out there for a social engager. Facebook has to make $$$. To do that, they must offer attractive vehicles to marketers. There are a myriad of ad units. But a key Facebook marketing concept is the Sponsored Story. It’s key because it encourages content that’s good, relevant, and performs well organically. If it is, marketing dollars can amplify it and extend its reach. Brands can expect the rollout of a search product and an ad network. That’s a big deal. It takes, as Open Graph does, the power of Facebook’s user data and carries it beyond the Facebook environment into the digital world at large. No one could target like Facebook can, and some analysts think it could double their roughly $5 billion revenue stream. As every potential revenue nook and cranny is explored, there are the users themselves. In addition to Gifts, Facebook thinks users might pay a few bucks to promote their own posts so more of their friends will see them. There’s also word classifieds could be purchased in News Feeds, though they won’t be called classifieds. And that’s where Facebook stands; a wildly popular destination, a part of our culture, with ever increasing functionalities, the biggest of big data, revenue strategies that appeal to marketers without souring the user experience, new challenges as a now public company, ongoing privacy concerns, and innovations that carry Facebook far beyond its own borders. Anyone care to write a “this is the end of Facebook” headline? @mikestilesPhoto via stock.schng

Read the article

Oracle VM RAC template - what it took

- by wcoekaer

In my previous posting I introduced the latest Oracle Real Application Cluster / Oracle VM template. I mentioned how easy it is to deploy a complete Oracle RAC cluster with Oracle VM. In fact, you don't need any prior knowledge at all to get a complete production-ready setup going. Here is an example... I built a 4 node RAC cluster, completely configured in just over 40 minutes - starting from import template into Oracle VM, create VMs to fully up and running Oracle RAC. And what was needed? 1 textfile with some hostnames and ip addresses and deploycluster.py. The setup is a 4 node cluster where each VM has 8GB of RAM and 4 vCPUs. The shared ASM storage in this case is 100GB, 5 x 20GB volumes. The VM names are racovm.0-racovm.3. The deploycluster script starts the VMs, verifies the configuration and sends the database cluster configuration info through Oracle VM Manager to the 4 node VMs. Once the VMs are up and running, the first VM starts the actual Oracle RAC setup inside and talks to the 3 other VMs. I did not log into any VM until after everything was completed. In fact, I connected to the database remotely before logging in at all. # ./deploycluster.py -u admin -H localhost --vms racovm.0,racovm.1,racovm.2,racovm.3 --netconfig ./netconfig.ini Oracle RAC OneCommand (v1.1.0) for Oracle VM - deploy cluster - (c) 2011-2012 Oracle Corporation (com: 26700:v1.1.0, lib: 126247:v1.1.0, var: 1100:v1.1.0) - v2.4.3 - wopr8.wimmekes.net (x86_64) Invoked as root at Sat Jun 2 17:31:29 2012 (size: 37500, mtime: Wed May 16 00:13:19 2012) Using: ./deploycluster.py -u admin -H localhost --vms racovm.0,racovm.1,racovm.2,racovm.3 --netconfig ./netconfig.ini INFO: Login password to Oracle VM Manager not supplied on command line or environment (DEPLOYCLUSTER_MGR_PASSWORD), prompting... Password: INFO: Attempting to connect to Oracle VM Manager... INFO: Oracle VM Client (3.1.1.305) protocol (1.8) CONNECTED (tcp) to Oracle VM Manager (3.1.1.336) protocol (1.8) IP (192.168.1.40) UUID (0004fb0000010000cbce8a3181569a3e) INFO: Inspecting /root/rac/deploycluster/netconfig.ini for number of nodes defined... INFO: Detected 4 nodes in: /root/rac/deploycluster/netconfig.ini INFO: Located a total of (4) VMs; 4 VMs with a simple name of: ['racovm.0', 'racovm.1', 'racovm.2', 'racovm.3'] INFO: Verifying all (4) VMs are in Running state INFO: VM with a simple name of "racovm.0" is in a Stopped state, attempting to start it...OK. INFO: VM with a simple name of "racovm.1" is in a Stopped state, attempting to start it...OK. INFO: VM with a simple name of "racovm.2" is in a Stopped state, attempting to start it...OK. INFO: VM with a simple name of "racovm.3" is in a Stopped state, attempting to start it...OK. INFO: Detected that all (4) VMs specified on command have (5) common shared disks between them (ASM_MIN_DISKS=5) INFO: The (4) VMs passed basic sanity checks and in Running state, sending cluster details as follows: netconfig.ini (Network setup): /root/rac/deploycluster/netconfig.ini buildcluster: yes INFO: Starting to send cluster details to all (4) VM(s)....... INFO: Sending to VM with a simple name of "racovm.0".... INFO: Sending to VM with a simple name of "racovm.1"..... INFO: Sending to VM with a simple name of "racovm.2"..... INFO: Sending to VM with a simple name of "racovm.3"...... INFO: Cluster details sent to (4) VMs... Check log (default location /u01/racovm/buildcluster.log) on build VM (racovm.0)... INFO: deploycluster.py completed successfully at 17:32:02 in 33.2 seconds (00m:33s) Logfile at: /root/rac/deploycluster/deploycluster2.log my netconfig.ini # Node specific information NODE1=db11rac1 NODE1VIP=db11rac1-vip NODE1PRIV=db11rac1-priv NODE1IP=192.168.1.56 NODE1VIPIP=192.168.1.65 NODE1PRIVIP=192.168.2.2 NODE2=db11rac2 NODE2VIP=db11rac2-vip NODE2PRIV=db11rac2-priv NODE2IP=192.168.1.58 NODE2VIPIP=192.168.1.66 NODE2PRIVIP=192.168.2.3 NODE3=db11rac3 NODE3VIP=db11rac3-vip NODE3PRIV=db11rac3-priv NODE3IP=192.168.1.173 NODE3VIPIP=192.168.1.174 NODE3PRIVIP=192.168.2.4 NODE4=db11rac4 NODE4VIP=db11rac4-vip NODE4PRIV=db11rac4-priv NODE4IP=192.168.1.175 NODE4VIPIP=192.168.1.176 NODE4PRIVIP=192.168.2.5 # Common data PUBADAP=eth0 PUBMASK=255.255.255.0 PUBGW=192.168.1.1 PRIVADAP=eth1 PRIVMASK=255.255.255.0 RACCLUSTERNAME=raccluster DOMAINNAME=wimmekes.net DNSIP= # Device used to transfer network information to second node # in interview mode NETCONFIG_DEV=/dev/xvdc # 11gR2 specific data SCANNAME=db11vip SCANIP=192.168.1.57 last few lines of the in-VM log file : 2012-06-02 14:01:40:[clusterstate:Time :db11rac1] Completed successfully in 2 seconds (0h:00m:02s) 2012-06-02 14:01:40:[buildcluster:Done :db11rac1] Build 11gR2 RAC Cluster 2012-06-02 14:01:40:[buildcluster:Time :db11rac1] Completed successfully in 1779 seconds (0h:29m:39s) From start_vm to completely configured : 29m:39s. The other 10m was the import template and create 4 VMs from template along with the shared storage configuration. This consists of a complete Oracle 11gR2 RAC database with ASM, CRS and the RDBMS up and running on all 4 nodes. Simply connect and use. Production ready. Oracle on Oracle.

Read the article

Auto-Configuring SSIS Packages

- by Davide Mauri

SSIS Package Configurations are very useful to make packages flexible so that you can change objects properties at run-time and thus make the package configurable without having to open and edit it. In a complex scenario where you have dozen of packages (even in in the smallest BI project I worked on I had 50 packages), each package may have its own configuration needs. This means that each time you have to run the package you have to pass the correct Package Configuration. I usually use XML configuration files and I also force everyone that works with me to make sure that an object that is used in several packages has the same name in all package where it is used, in order to simplify configurations usage. Connection Managers are a good example of one of those objects. For example, all the packages that needs to access to the Data Warehouse database must have a Connection Manager named DWH. Basically we define a set of “global” objects so that we can have a configuration file for them, so that it can be used by all packages. If a package as some specific configuration needs, we create a specific – or “local” – XML configuration file or we set the value that needs to be configured at runtime using DTLoggedExec’s Package Parameters: http://dtloggedexec.davidemauri.it/Package%20Parameters.ashx Now, how we can improve this even more? I’d like to have a package that, when it’s run, automatically goes “somewhere” and search for global or local configuration, loads it and applies it to itself. That’s the basic idea of Auto-Configuring Packages. The “somewhere” is a SQL Server table, defined in this way In this table you’ll put the values that you want to be used at runtime by your package: The ConfigurationFilter column specify to which package that configuration line has to be applied. A package will use that line only if the value specified in the ConfigurationFilter column is equal to its name. In the above sample. only the package named “simple-package” will use the line number two. There is an exception here: the $$Global value indicate a configuration row that has to be applied to any package. With this simple behavior it’s possible to replicate the “global” and the “local” configuration approach I’ve described before. The ConfigurationValue contains the value you want to be applied at runtime and the PackagePath contains the object to which that value will be applied. The ConfiguredValueType column defined the data type of the value and the Checksum column is contains a calculated value that is simply the hash value of ConfigurationFilter plus PackagePath so that it can be used as a Primary Key to guarantee uniqueness of configuration rows. As you may have noticed the table is very similar to the table originally used by SSIS in order to put DTS Configuration into SQL Server tables: SQL Server SSIS Configuration Type: http://msdn.microsoft.com/en-us/library/ms141682.aspx Now, how it works? It’s very easy: you just have to call DTLoggedExec with the /AC option: DTLoggedExec.exe /FILE:”mypackage.dtsx” /AC:"localhost;ssis_auto_configuration;ssiscfg.configuration" the AC option expects a string with the following format: <database_server>;<database_name>;<table_name>; only Windows Authentication is supported. When DTLoggedExec finds an Auto-Configuration request, it injects a new connection manager in the loaded package. The injected connection manager is named $$DTLoggedExec_AutoConfigure and is used by the two SQL Server DTS Configuration ($$DTLoggedExec_Global and $$DTLoggedExec_Local) also injected by DTLoggedExec, used to load “local” and “global” configuration. Now, you may start to wonder why this approach cannot be used without having all this stuff going around, but just passing to a package always two XML DTS Configuration files, (to have to “local” and the “global” configurations) doing something like this: DTLoggedExec.exe /FILE:”mypackage.dtsx” /CONF:”global.dtsConfig” /CONF:”mypackage.dtsConfig” The problem is that this approach doesn’t work if you have, in one of the two configuration file, a value that has to be applied to an object that doesn’t exists in the loaded package. This situation will raise an error that will halt package execution. To solve this problem, you may want to create a configuration file for each package. Unfortunately this will make deployment and management harder, since you’ll have to deal with a great number of configuration files. The Auto-Configuration approach solve all these problems at once! We’re using it in a project where we have hundreds of packages and I can tell you that deployment of packages and their configuration for the pre-production and production environment has never been so easy! To use the Auto-Configuration option you have to download the latest DTLoggedExec release: http://dtloggedexec.codeplex.com/releases/view/62218 Feedback, as usual, are very welcome!

Read the article

Defining Your Online Segmentation and Targeting Strategy

- by Christie Flanagan

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A lot of times, companies will put online segmentation and targeting on the back burner because they don’t know where to start. Often, I’ve heard web managers say that their segments aren’t well understood yet, so they can’t really deliver personalized online experiences that are meaningful. This lack of complete understanding means that they don't really bother to try. But, I don’t think you necessarily need to have an elaborate segmentation and targeting strategy already in place to start delivering a more relevant online customer experience. Sometimes it helps to think of how segmentation and targeting might solve some of the challenges your sites visitors are currently experiencing on your web presence, rather than doing nothing and waiting until a fully baked segmentation strategy lands in your inbox. For example, perhaps you have a broad and varied service offering that makes it difficult for site visitors to easily find the solutions that are most relevant for them. How can segmentation and targeting help solve this problem? Or maybe it’s like the airline I described in Monday’s post where the special deals featured on the home page are only relevant to site visitors from a couple of cities. Couldn’t segmentation and targeting help them to highlight offers on their home page that are relevant to a larger share of their site visitors? Your early segmentation and targeting efforts do not need to be complicated. There are simple ways to start delivering a more relevant online customer experience, even if you’re dealing with anonymous site visitors. These include targeting content to site visitors based on: Referral: Deliver targeted content to your site visitors that is based on where they came from or the search term they used to find your site Behavior: Deliver content to your site visitors that is related or similar to content they’ve clicked on already Location: Deliver content your site visitors that is most relevant for their geographic location (this would solve that pesky airline home page problem described above) So as you can see, there really are some very simple ways in which you can start improving your online customer experience using very basic segmentation and targeting methods. One thing to keep in mind as you start to define you segmentation and targeting strategy is that there are many different types of attributes or combinations of attributes upon which you can base your segmentation and targeting strategy. In addition to referral, behavior and location, other attributes that you should consider are: Profile Information: What profile information do you know about this customer already? Perhaps they provided some information on their interests and preferences when they first registered with your site. Time: What time is it and how does that impact what my site visitors are looking for or trying to do? Demographics: What are my site visitors’ ages, incomes or ethnicities? Which attributes you select to include in your segmentation strategy will depend on your unique business needs and objectives. Attributes such as behavior or referral may not be the most important targeting criteria depending on your situation. For example, if you’re a newspaper you might know that certain visitors are sports fans based on their profile information. You can create a segment for sports fans and target sports related content to that segment of your readership online. Or perhaps, a reader is browsing stories that are related to politics; you can use that visitor’s behavior to assign him or her to a segment for those interested in politics. From there you can recommend more stories to that visitor based on their interest in politics. For an airline, the visitor’s location may be a more important attribute. By detecting the visitor’s location, you can assign them to an appropriate segment and then target special flights and offers to them based on their likely departure airport. As you can see, there are many practical ways that you can start improving the experience your customers receive on your web presence using fairly basic segmentation and targeting techniques. If you want to learn more about segmentation and targeting using Oracle’s web experience management solution, check out this helpful video that demonstrates these powerful capabilities in Oracle WebCenter Sites. ***** On Demand Webcast Featuring Brian Solis of Altimeter Group Trends such as the mobile web, social media, gamification and real-time are changing customer behavior and expectations. In this new environment, many businesses will struggle. Some will fall by the wayside, while others learn to adapt and thrive. Watch this on demand webcast with Altimeter Group digital analyst and author, Brian Solis, and discover what your organization needs to know about how to compete in the new era of Digital Darwinism. View now.

Read the article

Adventures in Lab Management Configuration: Part 2 of 3

- by Enrique Lima

The first post was the high level overview. Now it is time for the details on what was done to the existing CMMI Project based on CMMI v 4.2. The first step was to go into Visual Studio, then from the Team Project Collection Settings and then to the Process Template Manager. Once there, it was a matter of selecting the appropriate template (MSF for CMMI Process Improvement v5.0) and download to a point I could reference later (for example C:\Templates). Then on to using the steps from the guidance post. Since I was using an x64 deployment, I will make reference to the path as <toolpath>, however the actual path to reference in a 64-bit environment is “C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE”. As I mentioned on the previous post, make sure to first perform a backup of the Configuration, Collection and Warehouse DBs. If you did not apply any changes to the names and such, then you will find those as tfs_Configuration, tfs_DefaultCollection and tfs_Warehouse. Now, the work needed with the witadmin tool: That includes the uploading of the structures that differ from v4.2 to v5.0 There is likely going to be an issue with the naming of some fields. For example, TFS 2010 likes something along the lines of “Area ID”, whereas TFS 2008 would have had it as “AreaID”. So, this will need to be corrected. Some posts will have you go through this after the errors pop up. I would recommend doing this process prior to executing the importwitd process. witadmin listfields /collection:<path to collection> > c:\ListFields.txt Review the following fields: AreaID, review the Name property and validate if it states “AreaID”, the you will need to rename the Name field to reflect “Area ID”. ExternalLinkCount, RelatedLinkCount, HyperLinkCount, AttachedFileCount and IterationID would be the other fields to check. To correct the issue, then execute the following: witadmin changefield /collection:<path to collection> /n:"System.ExternalLinkCount" /name:"External Link Count" Repeat for Area ID, Related Link Count, Hyperlink Count, Attached File Count and Iteration ID. Once this is done, proceed with the commands below. witadmin importwitd /collection:<path to collection> /p:<project> /f:"<path to downloaded template>\MSF for CMMI Process Improvement v5.0\WorkItem Tracking\TypeDefinitions\TestCase.xml" witadmin importwitd /collection:<path to collection> /p:<project> /f:"<path to downloaded template>\MSF for CMMI Process Improvement v5.0\WorkItem Tracking\TypeDefinitions\SharedStep.xml" witadmin importcategories /collection:<path to collection> /p:<project> /f:"<path to downloaded template>\MSF for CMMI Process Improvement v5.0\WorkItem Tracking\categories.xml" Modifications to the Bug Definition: First step is to export the existing definition. witadmin exportwitd /collection<path to collection> /p:<project> /n:bug /f:"<path to downloaded template>\MSF for CMMI Process Improvement v5.0\MyBug.xml" Make modifications to recently exported MyBug.xml file. Details for the modification are here: http://msdn.microsoft.com/en-us/library/ff452591.aspx#ModifyTask Once the changes are done, proceed with the import command witadmin importwitd /collection:<path to collection> /p: <project> /f:"<path to downloaded template>\MSF for CMMI Process Improvement v5.0\MyBug.xml" Repeat the process for the the Scenario or Requirement Type Definition witadmin exportwitd /collection<path to collection> /p:<project> /n:requirement /f:"<path to downloaded template>\MSF for CMMI Process Improvement v5.0\MyRequirement.xml" Make modifications to recently exported MyRequirement.xml file. Details for the modification are here: http://msdn.microsoft.com/en-us/library/ff452591.aspx#ModifyTask Once the changes are done, proceed with the import command witadmin importwitd /collection:<path to collection> /p: <project> /f:"<path to downloaded template>\MSF for CMMI Process Improvement v5.0\MyRequirement.xml" Provide the Bug Field Mapping definition, after creating the file as specified here: http://msdn.microsoft.com/en-us/library/ff452591.aspx#TCMBugFieldMapping tcm bugfieldmapping /import /mappingfile:"<path to downloaded template>\MSF for CMMI Process Improvement v5.0\bugfieldmappings.xml" /collection:<path to collection> /teamproject:<project name>

Read the article

The Arab HEUG is now a reality, and other random thoughts

- by user9147039

I just returned from Doha, Qatar where the first of its kind HEUG (Higher Education User Group) meeting for institutions in the Middle East and North Africa was held at Qatar University and jointly hosted by Damman University from Saudi Arabia. Over 80 delegates attended including representation from education institutions in Oman, Saudi Arabia, Lebanon, and Qatar. There are many other regional HEUG organizations in place (in Australia/New Zealand, APAC, EMEA, as well as smaller regional HEUG’s in the Netherlands, South Africa, and in regions of the US), but it was truly an accomplishment to see this Middle East/North Africa group organize and launch their chapter with a meeting of this quality. To be known as the Arab HEUG going forward, I am excited about the prospects for sharing between the institutions and for the growth of Oracle solutions in the region. In particular the hosts for the event (Qatar University) did a masterful job with logistics and organization, and the quality of the event was a testament to their capabilities. Among the more interesting and enlightening presentations I attended were one from Dammam University on the lessons learned from their implementation of Campus Solutions and transition off of Banner, as well as the use by Qatar University E-business Suite for grants management (both pre-and post-award). The most notable fact coming from this latter presentation was the fit (89%) of e-Business Suite Grants to the university’s requirements. In a few weeks time we will be convening the 5th meeting of the Oracle Education & Research Industry Strategy Council in Redwood Shores (5th since my advent into my current role). The main topics of discussion will be around our Higher Education Applications Strategy for the future (including cloud approaches to ERP (HCM, Finance, and Student Information Systems), how some cases studies on the benefits of leveraging delivered functionality and extensibility in the software (versus customization). On the second day of the event we will turn our attention to Oracle in Research and also budgeting and planning in higher education. Both of these sessions will include significant participation from council members in the form of panel discussions. Our EVP’s for Systems (John Fowler) and for Global Cloud Services and North America application sales (Joanne Olson) will join us for the discussion. I recently read a couple of articles that were surprising to me. The first was from Inside Higher Ed on October 15 entitled, “As colleges prepare for major software upgrades, Kuali tries to woo them from corporate vendors.” It continues to disappointment that after all this time we are still debating whether it is better to build enterprise software through open or community source initiatives when fully functional, flexible, supported, and widely adopted options exist in the marketplace. Over a decade or more ago when these solutions were relatively immature and there was a great deal of turnover in the market I could appreciate the initiatives like Kuali. But let’s not kid ourselves – the real objective of this movement is to counter a perceived predatory commercial software industry. Again, when commercial solutions are deployed as written without significant customization, and standard business processes are adopted, the cost of these solutions (relative to the value delivered) is quite low, and certain much lower than the massive investment (and risk) in in-house developers to support a bespoke community source system. In this era of cost pressures in education and the need to refocus resources on teaching, learning, and research, I believe it’s bordering on irresponsible to continue to pursue open-source ERP. Many of the adopter’s total costs are staggering and have little to show for their efforts and expended resources. The second article was recently in the Chronicle of Higher Education and was entitled “’Big Data’ Is Bunk, Obama Campaign’s Tech Guru Tells University Leaders.” This one was so outrageous I almost don’t want to legitimize it by referencing it here. In the article the writer relays statements made by Harper Reed, President Obama’s former CTO for his 2012 re-election campaign, that big data solutions in education have no relevance and are akin to snake oil. He goes on to state that while he’s a fan of data-driven decision making in education, most of the necessary analysis can be accomplished in Excel spreadsheets. Yeah… right. This is exactly what ails education (higher education in particular). Dozens of shadow and siloed systems running on spreadsheets with limited-to-no enterprise wide initiatives to harness the data-rich environment that is a higher ed institution and transform the data into useable information. I’ll grant Mr. Reed that “Big Data” is overused and hackneyed, but imperatives like improving student success in higher education are classic big data problems that data-mining and predictive analytics can address. Further, higher ed need to be producing a massive amount more data scientists and analysts than are currently in the pipeline, to further this discipline and application of these tools to many many other problems across multiple industries.

Read the article

Your Next IT Job

- by BuckWoody

Some data professionals have worked (and plan to work) in the same place for a long time. In organizations large and small, the turnover rate just isn’t that high. This has not been my experience. About every 3-5 years I’ve changed either roles or companies. That might be due to the IT environment or my personality (or a mix of the two), but the point is that I’ve had many roles and worked for many companies large and small throughout my 27+ years in IT. At one point this might have been a detriment – a prospective employer looks at the resume and says “it seems you’ve moved around quite a bit.” But I haven’t found that to be the case all the time –in fact, in some cases the variety of jobs I’ve held has been an asset because I’ve seen what works (and doesn’t) in other environments, which can save time and money. So if you’re in the first camp – great! Stay where you are, and continue doing the work you love. but if you’re in the second, then this post might be useful. If you are planning on making a change, or perhaps you’ve hit a wall at your current location, you might start looking around for a better paying job – and there’s nothing wrong with that. We all try to make our lives better, and for some that involves more money. Money, however, isn’t always the primary motivator. I’ve gone to another job that doesn’t have as many benefits or has the same salary as the current job I’m working to gain more experience, get a better work/life balance and so on. It’s a mix of factors that only you know about. So I thought I would lay out a few advantages and disadvantages in the shops I’ve worked at. This post isn’t aimed at a single employer, but represents a mix of what I’ve experienced, and of course the opinions here are my own. You will most certainly have a different take – if so, please post a response! I also won’t mention a specific industry – I’ve worked everywhere from medical firms, legal offices, retail, billing centers, manufacturing, government, even to NASA. I’m focusing here mostly on size and composition. And I’m making some very broad generalizations here – I am fully aware that a small company might have great benefits and a large company might allow a lot of role flexibility. your mileage may vary – and again, post those comments! Small Company To me a “small company” means around 100 people or less – sometimes a lot less. These can be really fun, frustrating places to to work. Advantages: a great deal of flexibility, a wide range of roles (often at the same time), a large degree of responsibility, immediate feedback, close relationships with co-workers, work directly with your customer. Disadvantages: Too much responsibility, little work/life balance, immature political structure, few (if any) benefits. If the business is family-owned, they can easily violate work/life boundaries. Medium Size company In my experience the next size company I would work for involves from a few hundred people to around five thousand. Advantages: Good mobility – fairly easy to get promoted, acceptable benefits, more defined responsibilities, better work/life balance, balanced load for expertise, but still the organizational structure is fairly simple to understand. Disadvantages: Pay is not always highest, rapid changes in structure as the organization grows, transient workforce. You may not be given the opportunity to work with another technology if someone already “owns” it. Politics are painful at this level as people try to learn how to do it. Large Company When you get into the tens of thousands of folks employed around the world, you’re in a large company. Advantages: Lots of room to move around – sometimes you can work (as I have) multiple jobs through the years and yet stay at the same company, building time for benefits, very defined roles, trained managers (yes, I know some of them are still awful – trust me – I DO know that), higher-end benefits, long careers possible, discounts at retailers and other “soft” benefits, prestige. For some, a higher level of politics (done professionally) is a good thing. Disadvantages: You could become another faceless name in the crowd, might not allow a great deal of flexibility, large organizational changes might take away any control you have of your career. I’ve also seen large layoffs happen, and good people get let go while “dead weight” is retained. For some, a higher level of politics is distasteful. So what are your experiences? Share with the group! Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

Issues with ILMerge, Lambda Expressions and VS2010 merging?

- by John Blumenauer

A little Background For quite some time now, it’s been possible to merge multiple .NET assemblies into a single assembly using ILMerge in Visual Studio 2008. This is especially helpful when writing wrapper assemblies for 3rd-party libraries where it’s desirable to minimize the number of assemblies for distribution. During the merge process, ILMerge will take a set of assemblies and merge them into a single assembly. The resulting assembly can be either an executable or a DLL and is identified as the primary assembly. Issue During a recent project, I discovered using ILMerge to merge assemblies containing lambda expressions in Visual Studio 2010 is resulting in invalid primary assemblies. The code below is not where the initial issue was identified, I will merely use it to illustrate the problem at hand. In order to describe the issue, I created a console application and a class library for calculating a few math functions utilizing lambda expressions. The code is available for download at the bottom of this blog entry. MathLib.cs using System; namespace MathLib { public static class MathHelpers { public static Func<double, double, double> Hypotenuse = (x, y) => Math.Sqrt(x * x + y * y); static readonly Func<int, int, bool> divisibleBy = (int a, int b) => a % b == 0; public static bool IsPrimeNumber(int x) { { for (int i = 2; i <= x / 2; i++) if (divisibleBy(x, i)) return false; return true; }; } } } Program.cs using System; using MathLib; namespace ILMergeLambdasConsole { class Program { static void Main(string[] args) { int n = 19; if (MathHelpers.IsPrimeNumber(n)) { Console.WriteLine(n + " is prime"); } else { Console.WriteLine(n + " is not prime"); } Console.ReadLine(); } } } Not surprisingly, the preceding code compiles, builds and executes without error prior to running the ILMerge tool. ILMerge Setup In order to utilize ILMerge, the following changes were made to the project. The MathLib.dll assembly was built in release configuration and copied to the MathLib folder. The following folder hierarchy was used for this example: The project file for ILMergeLambdasConsole project file was edited to add the ILMerge post-build configuration. The following lines were added near the bottom of the project file: <Target Name="AfterBuild" Condition="'$(Configuration)' == 'Release'"> <Exec Command=""..\..\lib\ILMerge\Ilmerge.exe" /ndebug /out:@(MainAssembly) "@(IntermediateAssembly)" @(ReferenceCopyLocalPaths->'"%(FullPath)"', ' ')" /> <Delete Files="@(ReferenceCopyLocalPaths->'$(OutDir)%(DestinationSubDirectory)%(Filename)%(Extension)')" /> </Target> The ILMergeLambdasConsole project was modified to reference the MathLib.dll located in the MathLib folder above. ILMerge and ILMerge.exe.config was copied into the ILMerge folder shown above. The contents of ILMerge.exe.config are: <?xml version="1.0" encoding="utf-8" ?> <configuration> <startup useLegacyV2RuntimeActivationPolicy="true"> <requiredRuntime safemode="true" imageVersion="v4.0.30319" version="v4.0.30319"/> </startup> </configuration> Post-ILMerge After compiling and building, the MathLib.dll assembly will be merged into the ILMergeLambdasConsole executable. Unfortunately, executing ILMergeLambdasConsole.exe now results in a crash. The ILMerge documentation recommends using PEVerify.exe to validate assemblies after merging. Executing PEVerify.exe against the ILMergeLambdasConsole.exe assembly results in the following error: Further investigation by using Reflector reveals the divisibleBy method in the MathHelpers class looks a bit questionable after the merge. Prior to using ILMerge, the same divisibleBy method appeared as the following in Reflector: It’s pretty obvious something has gone awry during the merge process. However, this is only occurring when building within the Visual Studio 2010 environment. The same code and configuration built within Visual Studio 2008 executes fine. I’m still investigating the issue. If anyone has already experienced this situation and solved it, I would love to hear from you. However, as of right now, it looks like something has gone terribly wrong when executing ILMerge against assemblies containing Lambdas in Visual Studio 2010. Solution Files ILMergeLambdaExpression

Read the article

Content Query Web Part and the Yes/No Field

- by Bil Simser

The Content Query Web Part (CQWP) is a pretty powerful beast. It allows you to do multiple site queries and aggregate the results. This is great for rolling up content and doing some summary type reporting. Here’s a trick to remember about Yes/No fields and using the CQWP. If you’re building a news style site and want to aggregate say all the announcements that people tag a certain way, up onto the home page this might be a solution. First we need to allow a way for users of all our sites to mark an announcement for inclusion on our Intranet Home Page. We’ll do this by just modifying the Announcement Content type and adding a Yes/No field to it. There are alternate ways of doing this like building a new Announcement type or stapling a feature to all sites to add our column but this is pretty low impact and only affects our current site collection so let’s go with it for now, okay? You can berate me in the comments about the proper way I should have done this part. Go to the Site Settings for the Site Collection and click on Site Content Types under the Galleries. This takes you to the gallery for this site and all subsites. Scroll down until you see the List Content Types and click on Announcements. Now we’re modifying the Announcement content type which affects all those announcement lists that are created by default if you’re building sites using the Team Site template (or creating a new Announcements list on any site for that matter). Click on Add from new site column under the Column list. This will allow us to create a new Yes/No field that users will see in Announcement items. This field will allow the user to flag the announcement for inclusion on the home page. Feel free to modify the fields as you see fit for your environment, this is just an example. Now that we’ve added the column to our Announcements Content type we can go into any site that has an announcement list, modify that announcement and flag it to be included on our home page. See the new Featured column? That was the result of modifying our Announcements Content Type on this site collection. Now we can move onto the dirty part, displaying it in a CQWP on the home page. And here is where the fun begins (and the head scratching should end). On our home page we want to drop a Content Query Web Part and aggregate any Announcement that’s been flagged as Featured by the users (we could also add the filter to handle Expires so we don’t show old content so go ahead and do that if you want). First add a CQWP to the page then modify the settings for the web part. In the first section, Query, we want the List Type to be set to Announcements and the Content type to be Announcement so set your options like this: Click Apply and you’ll see the results display all Announcements from any site in the site collection. I have five team sites created each with a unique announcement added to them. Now comes the filtering. We don’t want to include every announcement, only ones users flag using that Featured column we added. At first blush you might scroll down to the Additional Filters part of the Query options and set the Featured column to be equal to Yes: This seems correct doesn’t it? After all, the column is a Yes/No column and looking at an announcement in the site, it displays the field as Yes or No: However after applying the filter you get this result: (I have the announcements from Team Site 1 and Team Site 4 flagged as Featured) Huh? It’s BACKWARDS! Let’s confirm that. Go back in and change the Additional Filters section from Yes to No and hit Apply and you get this: Wait a minute? Shouldn’t I see Team Site 1 and 4 if the logic is backwards? Why am I seeing the same thing as before. What gives… For whatever reason, unknown to me, a Yes/No field (even though it displays as such) really uses 1 and 0 behind the scenes. Yeah, someone was stuck on using integer values for booleans when they wrote SharePoint (probably after a long night of white boarding ways to mess with developers heads) and came up with this. The solution is pretty simple but not very discoverable. Set the filter to include your flagged items like so: And it will filter the items marked as Featured correctly giving you this result: This kind of solution could also be extended and enhanced. Here are a few suggestions and ideas: Modify the ItemStyle.xsl file to add a new style for this aggregation which would include the first few paragraphs of the body (or perhaps add another field to the Content type called Excerpt or Summary and display that instead) Add an Image column to the Announcement Content type to include a Picture field and display it in the summary Add a Category choice field (Employee News, Current Events, Headlines, etc.) and add multiple CQWPs to the home page filtering each one on a different category I know some may find this topic old and dusty but I didn’t see a lot out there specifically on filtering the Yes/No fields and the whole 1/0 trick was a little wonky, so I figured a few pictures would help walk through overcoming yet another SharePoint weirdness. With a little work and some creative juices you can easily us the power of aggregation and the CQWP to build a news site from content on your team sites.

Read the article

MySQL Connector/Net 6.6.3 Beta 2 has been released

- by fernando

MySQL Connector/Net 6.6.3, a new version of the all-managed .NET driver for MySQL has been released. This is the second of two beta releases intended to introduce users to the new features in the release. This release is feature complete it should be stable enough for users to understand the new features and how we expect them to work. As is the case with all non-GA releases, it should not be used in any production environment. It is appropriate for use with MySQL server versions 5.0-5.6. It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.6 version of MySQL Connector/Net brings the following new features: * Stored routine debugging * Entity Framework 4.3 Code First support * Pluggable authentication (now third parties can plug new authentications mechanisms into the driver). * Full Visual Studio 2012 support: everything from Server Explorer to Intellisense& the Stored Routine debugger. Stored Procedure Debugging ------------------------------------------- We are very excited to introduce stored procedure debugging into our Visual Studio integration. It works in a very intuitive manner by simply clicking 'Debug Routine' from Server Explorer. You can debug stored routines, functions& triggers. These release contains fixes specific of the debugger as well as other fixes specific of other areas of Connector/NET: * Added feature to define initial values for InOut stored procedure arguments. * Debugger: Fixed Visual Studio locked connection after debugging a routine. * Fix for bug Cannot Create an Entity with a Key of Type String (MySQL bug #65289, Oracle bug #14540202). * Fix for bug "CacheServerProperties can cause 'Packet too large' error". MySQL Bug #66578 Orabug #14593547. * Fix for handling unnamed parameter in MySQLCommand. This fix allows the mysqlcommand to handle parameters without requiring naming (e.g. INSERT INTO Test (id,name) VALUES (?, ?) ) (MySQL Bug #66060, Oracle bug #14499549). * Fixed end of line issue when debugging a routine. * Added validation to avoid overwriting a routine backup file when it hasn't changed. * Fixed inheritance on Entity Framework Code First scenarios. (MySql bug #63920 and Oracle bug #13582335). * Fixed "Trying to customize column precision in Code First does not work" (MySql bug #65001, Oracle bug #14469048). * Fixed bug ASP.NET Membership database fails on MySql database UTF32 (MySQL bug #65144, Oracle bug #14495292). * Fix for MySqlCommand.LastInsertedId holding only 32 bit values (MySql bug #65452, Oracle bug #14171960). * Fixed "Decimal type should have digits at right of decimal point", now default is 2, and user's changes in EDM designer are recognized (MySql bug #65127, Oracle bug #14474342). * Fix for NullReferenceException when saving an uninitialized row in Entity Framework (MySql bug #66066, Oracle bug #14479715). * Fix for error when calling RoleProvider.RemoveUserFromRole(): causes an exception due to a wrong table being used (MySql bug #65805, Oracle bug #14405338). * Fix for "Memory Leak on MySql.Data.MySqlClient.MySqlCommand", too many MemoryStream's instances created (MySql bug #65696, Oracle bug #14468204). * Added ANTLR attribution notice (Oracle bug #14379162). * Fix for debugger failing when having a routine with an if-elseif-else. * Also the programming interface for authentication plugins has been redefined. Some limitations remains, due to the current debugger architecture: * Some MySQL functions cannot be debugged currently (get_lock, release_lock, begin, commit, rollback, set transaction level).. * Only one debug session may be active on a given server. The Debugger is feature complete at this point. We look forward to your feedback. Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.5/en/connector-net.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our forums at http://forums.mysql.com/. Enjoy and thanks for the support!

Read the article

Basic WCF Unit Testing

- by Brian

Coming from someone who loves the KISS method, I was surprised to find that I was making something entirely too complicated. I know, shocker right? Now I'm no unit testing ninja, and not really a WCF ninja either, but had a desire to test service calls without a) going to a database, or b) making sure that the entire WCF infrastructure was tip top. Who does? It's not the environment I want to test, just the logic I’ve written to ensure there aren't any side effects. So, for the K.I.S.S. method: Assuming that you're using a WCF service library (you are using service libraries correct?), it's really as easy as referencing the service library, then building out some stubs for bunking up data. The service contract We’ll use a very basic service contract, just for getting and updating an entity. I’ve used the default “CompositeType” that is in the template, handy only for examples like this. I’ve added an Id property and overridden ToString and Equals. [ServiceContract] public interface IMyService { [OperationContract] CompositeType GetCompositeType(int id); [OperationContract] CompositeType SaveCompositeType(CompositeType item); [OperationContract] CompositeTypeCollection GetAllCompositeTypes(); } The implementation When I implement the service, I want to be able to send known data into it so I don’t have to fuss around with database access or the like. To do this, I first have to create an interface for my data access: public interface IMyServiceDataManager { CompositeType GetCompositeType(int id); CompositeType SaveCompositeType(CompositeType item); CompositeTypeCollection GetAllCompositeTypes(); } For the purposes of this we can ignore our implementation of the IMyServiceDataManager interface inside of the service. Pretend it uses LINQ to Entities to map its data, or maybe it goes old school and uses EntLib to talk to SQL. Maybe it talks to a tape spool on a mainframe on the third floor. It really doesn’t matter. That’s the point. So here’s what our service looks like in its most basic form: public CompositeType GetCompositeType(int id) { //sanity checks if (id == 0) throw new ArgumentException("id cannot be zero."); return _dataManager.GetCompositeType(id); } public CompositeType SaveCompositeType(CompositeType item) { return _dataManager.SaveCompositeType(item); } public CompositeTypeCollection GetAllCompositeTypes() { return _dataManager.GetAllCompositeTypes(); } But what about the datamanager? The constructor takes care of that. I don’t want to expose any testing ability in release (or the ability for someone to swap out my datamanager) so this is what we get: IMyServiceDataManager _dataManager; public MyService() { _dataManager = new MyServiceDataManager(); } #if DEBUG public MyService(IMyServiceDataManager dataManager) { _dataManager = dataManager; } #endif The Stub Now it’s time for the rubber to meet the road… Like most guys that ever talk about unit testing here’s a sample that is painting in *very* broad strokes. The important part however is that within the test project, I’ve created a bunk (unit testing purists would say stub I believe) object that implements my IMyServiceDataManager so that I can deal with known data. Here it is: internal class FakeMyServiceDataManager : IMyServiceDataManager { internal FakeMyServiceDataManager() { Collection = new CompositeTypeCollection(); Collection.AddRange(new CompositeTypeCollection { new CompositeType { Id = 1, BoolValue = true, StringValue = "foo 1", }, new CompositeType { Id = 2, BoolValue = false, StringValue = "foo 2", }, new CompositeType { Id = 3, BoolValue = true, StringValue = "foo 3", }, }); } CompositeTypeCollection Collection { get; set; } #region IMyServiceDataManager Members public CompositeType GetCompositeType(int id) { if (id <= 0) return null; return Collection.SingleOrDefault(m => m.Id == id); } public CompositeType SaveCompositeType(CompositeType item) { var existing = Collection.SingleOrDefault(m => m.Id == item.Id); if (null != existing) { Collection.Remove(existing); } if (item.Id == 0) { item.Id = Collection.Count > 0 ? Collection.Max(m => m.Id) + 1 : 1; } Collection.Add(item); return item; } public CompositeTypeCollection GetAllCompositeTypes() { return Collection; } #endregion } So it’s tough to see in this example why any of this is necessary, but in a real world application you would/should/could be applying much more logic within your service implementation. This all serves to ensure that between refactorings etc, that it doesn’t send sparking cogs all about or let the blue smoke out. Here’s a simple test that brings it all home, remember, broad strokes: [TestMethod] public void MyService_GetCompositeType_ExpectedValues() { FakeMyServiceDataManager fake = new FakeMyServiceDataManager(); MyService service = new MyService(fake); CompositeType expected = fake.GetCompositeType(1); CompositeType actual = service.GetCompositeType(2); Assert.AreEqual<CompositeType>(expected, actual, "Objects are not equal. Expected: {0}; Actual: {1};", expected, actual); } Summary That’s really all there is to it. You could use software x or framework y to do the exact same thing, but in my case I just didn’t really feel like it. This speaks volumes to my not yet ninja unit testing prowess.

Read the article

Mobile Apps for Oracle E-Business Suite

- by Steven Chan (Oracle Development)

Many things have changed in the mobile space over the last few years. Here's an update on our strategy for mobile apps for the E-Business Suite. Mobile app strategy We're building our family of mobile apps for the E-Business Suite using Oracle Mobile Application Framework. This framework allows us to write a single application that can be run on Apple iOS and Google Android platforms. Mobile apps for the E-Business Suite will share a common look-and-feel. The E-Business Suite is a suite of over 200 product modules spanning Financials, Supply Chain, Human Resources, and many other areas. Our mobile app strategy is to release standalone apps for specific product modules. Our Oracle Timecards app, which allows users to create and submit timecards, is an example of a standalone app. Some common functions that span multiple product areas will have dedicated apps, too. An example of this is our Oracle Approvals app, which allows users to review and approve requests for expenses, requisitions, purchase orders, recruitment vacancies and offers, and more. You can read more about our Oracle Mobile Approvals app here: Now Available: Oracle Mobile Approvals for iOS Our goal is to support smaller screen (e.g. smartphones) as well as larger screens (e.g. tablets), with the smaller screen versions generally delivered first. Where possible, we will deliver these as universal apps. An example is our Oracle Mobile Field Service app, which allows field service technicians to remotely access customer, product, service request, and task-related information. This app can run on a smartphone, while providing a richer experience for tablets. Deploying EBS mobile apps The mobile apps, themselves (i.e. client-side components) can be downloaded by end-users from the Apple iTunes today. Android versions will be available from Google play. You can monitor this blog for Android-related updates. Where possible, our mobile apps should be deployable with a minimum of server-side changes. These changes will generally involve a consolidated server-side patch for technology-stack components, and possibly a server-side patch for the functional product module. Updates to existing mobile apps may require new server-side components to enable all of the latest mobile functionality. All EBS product modules are certified for internal intranet deployments (i.e. used by employees within an organization's firewall). Only a subset of EBS products such as iRecruitment are certified to be deployed externally (i.e. used by non-employees outside of an organization's firewall). Today, many organizations running the E-Business Suite do not expose their EBS environment externally and all of the mobile apps that we're building are intended for internal employee use. Recognizing this, our mobile apps are currently designed for users who are connected to the organization's intranet via VPN. We expect that this may change in future updates to our mobile apps. Mobile apps and internationalization The initial releases of our mobile apps will be in English. Later updates will include translations for all left-to-right languages supported by the E-Business Suite. Right-to-left languages will not be translated. Customizing apps for enterprise deployments The current generation of mobile apps for Oracle E-Business Suite cannot be customized. We are evaluating options for limited customizations, including corporate branding with logos, corporate color schemes, and others. This is a potentially-complex area with many tricky implications for deployment and maintenance. We would be interested in hearing your requirements for customizations in enterprise deployments.Prerequisites Apple iOS 7 and higher Android 4.1 (API level 16) and higher, with minimum CPU/memory configurations listed here EBS 12.1: EBS 12.1.3 Family Packs for the related product module EBS 12.2.3 References Oracle E-Business Suite Mobile Apps, Release 12.1 and 12.2 Documentation (Note 1641772.1) Oracle E-Business Suite Mobile Apps Administrator's Guide, Release 12.1 and 12.2 (Note 1642431.1) Related Articles Using Mobile Devices with Oracle E-Business Suite Apple iPads Certified with Oracle E-Business Suite 12.1 Now Available: Oracle Mobile Approvals for iOS The preceding is intended to outline our general product direction. It is intended for information purposes only, and may not be incorporated into any contract. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decision. The development, release, and timing of any features or functionality described for Oracle’s products remains at the sole discretion of Oracle.

Read the article

Columnstore Case Study #2: Columnstore faster than SSAS Cube at DevCon Security

- by aspiringgeek

Preamble This is the second in a series of posts documenting big wins encountered using columnstore indexes in SQL Server 2012 & 2014. Many of these can be found in my big deck along with details such as internals, best practices, caveats, etc. The purpose of sharing the case studies in this context is to provide an easy-to-consume quick-reference alternative. See also Columnstore Case Study #1: MSIT SONAR Aggregations Why Columnstore? As stated previously, If we’re looking for a subset of columns from one or a few rows, given the right indexes, SQL Server can do a superlative job of providing an answer. If we’re asking a question which by design needs to hit lots of rows—DW, reporting, aggregations, grouping, scans, etc., SQL Server has never had a good mechanism—until columnstore. Columnstore indexes were introduced in SQL Server 2012. However, they're still largely unknown. Some adoption blockers existed; yet columnstore was nonetheless a game changer for many apps. In SQL Server 2014, potential blockers have been largely removed & they're going to profoundly change the way we interact with our data. The purpose of this series is to share the performance benefits of columnstore & documenting columnstore is a compelling reason to upgrade to SQL Server 2014. The Customer DevCon Security provides home & business security services & has been in business for 135 years. I met DevCon personnel while speaking to the Utah County SQL User Group on 20 February 2012. (Thanks to TJ Belt (b|@tjaybelt) & Ben Miller (b|@DBADuck) for the invitation which serendipitously coincided with the height of ski season.) The App: DevCon Security Reporting: Optimized & Ad Hoc Queries DevCon users interrogate a SQL Server 2012 Analysis Services cube via SSRS. In addition, the SQL Server 2012 relational back end is the target of ad hoc queries; this DW back end is refreshed nightly during a brief maintenance window via conventional table partition switching. SSRS, SSAS, & MDX Conventional relational structures were unable to provide adequate performance for user interaction for the SSRS reports. An SSAS solution was implemented requiring personnel to ramp up technically, including learning enough MDX to satisfy requirements. Ad Hoc Queries Even though the fact table is relatively small—only 22 million rows & 33GB—the table was a typical DW table in terms of its width: 137 columns, any of which could be the target of ad hoc interrogation. As is common in DW reporting scenarios such as this, it is often nearly to optimize for such queries using conventional indexing. DevCon DBAs & developers attended PASS 2012 & were introduced to the marvels of columnstore in a session presented by Klaus Aschenbrenner (b|@Aschenbrenner) The Details Classic vs. columnstore before-&-after metrics are impressive. Scenario Conventional Structures Columnstore ? SSRS via SSAS 10 - 12 seconds 1 second >10x Ad Hoc 5-7 minutes (300 - 420 seconds) 1 - 2 seconds >100x Here are two charts characterizing this data graphically. The first is a linear representation of Report Duration (in seconds) for Conventional Structures vs. Columnstore Indexes. As is so often the case when we chart such significant deltas, the linear scale doesn’t expose some the dramatically improved values corresponding to the columnstore metrics. Just to make it fair here’s the same data represented logarithmically; yet even here the values corresponding to 1 –2 seconds aren’t visible. The Wins Performance: Even prior to columnstore implementation, at 10 - 12 seconds canned report performance against the SSAS cube was tolerable. Yet the 1 second performance afterward is clearly better. As significant as that is, imagine the user experience re: ad hoc interrogation. The difference between several minutes vs. one or two seconds is a game changer, literally changing the way users interact with their data—no mental context switching, no wondering when the results will appear, no preoccupation with the spinning mind-numbing hurry-up-&-wait indicators. As we’ve commonly found elsewhere, columnstore indexes here provided performance improvements of one, two, or more orders of magnitude. Simplified Infrastructure: Because in this case a nonclustered columnstore index on a conventional DW table was faster than an Analysis Services cube, the entire SSAS infrastructure was rendered superfluous & was retired. PASS Rocks: Once again, the value of attending PASS is proven out. The trip to Charlotte combined with eager & enquiring minds let directly to this success story. Find out more about the next PASS Summit here, hosted this year in Seattle on November 4 - 7, 2014. DevCon BI Team Lead Nathan Allan provided this unsolicited feedback: “What we found was pretty awesome. It has been a game changer for us in terms of the flexibility we can offer people that would like to get to the data in different ways.” Summary For DW, reports, & other BI workloads, columnstore often provides significant performance enhancements relative to conventional indexing. I have documented here, the second in a series of reports on columnstore implementations, results from DevCon Security, a live customer production app for which performance increased by factors of from 10x to 100x for all report queries, including canned queries as well as reducing time for results for ad hoc queries from 5 - 7 minutes to 1 - 2 seconds. As a result of columnstore performance, the customer retired their SSAS infrastructure. I invite you to consider leveraging columnstore in your own environment. Let me know if you have any questions.

Read the article

Updated Agenda for OTN Architect Day Los Angeles (Oct 25)

- by Bob Rhubart

Here's the latest information on the session schedule and content for Oracle Technology Network Architect Day in Los Angeles on October 25, 2012. Registration is open, but seating is limited. When: Thursday October 25 12, 2012 8:30am – 5:00pm Where: Sofitel Los Angeles 8555 Beverly Boulevard Los Angeles, CA 90048 Agenda Time Session Title Room 8:30 am - 9:00 am Registration and Continental Breakfast 9:00 am - 9:15 am Welcome and Opening Comments | Bob Rhubart Beverly Ballroom 9:15 am - 10:00 am Engineered Systems: Oracle's Vision for the Future | Ralf Dossmann Oracle's Exadata and Exalogic are impressive products in their own right. But working in combination they deliver unparalleled transaction processing performance with up to a 30x increase over existing legacy systems, with the lowest cost of ownership over a 3 or 5 year basis than any other hardware. In this session you'll learn how to leverage Oracle's Engineered Systems within your enterprise to deliver record-breaking performance at the lowest TCO. Beverly Ballroom 10:00 am - 10:30 am Monitoring and Managing Applications in the Cloud | Basheer Khan Oracle offers a broad portfolio of software and hardware products and services to enable public, private and hybrid clouds to power the enterprise. However, enterprise cloud computing presents new management challenges, that need to be addressed to realize the economic benefits of cloud computing. In this session you will learn about the methods and tools you can use to proactively monitor your end-to-end Oracle Applications environment in the cloud, define service-level objectives, gain insight into your end users, and troubleshoot performance problems from a single console. Beverly Ballroom 10:30 am - 10:45 am Break 10:45 am - 11:30 am Breakout Sessions (pick one) Cloud Computing - Making IT Simple | Dr. James Baty The road to Cloud Computing is not without a few bumps. This session will help to smooth out your journey by tackling some of the potential complications. We'll examine whether standardization is a prerequisite for the Cloud. We'll look at why refactoring isn't just for application code. We'll check out deployable entities and their simplification via higher levels of abstraction. And we'll close out the session with a look at engineered systems and modular clouds. Beverly Ballroom Innovations in Grid Computing with Oracle Coherence | Ashok Aletty Learn how Oracle Coherence can increase the availability, scalability and performance of your existing applications with its advanced low-latency data-grid technologies. Also hear some interesting industry-specific use cases that customers had implemented and how Oracle is integrating Coherence into its Enterprise Java stack. Hollywood Room 11:30 am - 12:15 pm Breakout Sessions (pick one) Enterprise Strategy for Cloud Security | Dave Chappelle Security is high on the list of concerns for many organizations as they evaluate their cloud computing options. This session will examine security in the context of the various forms of cloud computing. We'll consider technical and non-technical aspects of security, and discuss several strategies for cloud computing, from both the consumer and producer perspectives. Beverly Ballroom Oracle Enterprise Manager | Perren Walker This session examines new Oracle Enterprise Manager monitoring, administration, and management features for Oracle Exalogic. It focuses on two management themes: cloud management related to virtualization and applications-to-disk management. For private cloud management, it discusses virtualization management features providing an enhanced set of application deployment capabilities enabling IaaS as well as PaaS interactions. Then from an end-to-end perspective, it covers the specific capabilities and—where applicable—best practices for machine, cloud, middleware, and application administration. Hollywood Room 12:15 pm - 1:15 pm Lunch Beverly Ballroom Lounge 1:15 pm - 2:00 pm Panel Discussion - Q&A with session speakers Beverly Ballroom 2:00 pm - 2:45 pm Breakout Sessions (pick one) Oracle Cloud Reference Architecture | Anbu Krishnaswamy Cloud initiatives are beginning to dominate enterprise IT roadmaps. Successful adoption of Cloud and the subsequent governance challenges warrant a Cloud reference architecture that is applied consistently across the enterprise. This presentation will answer the important questions: What exactly is a Cloud, why you need it, what changes it will bring to the enterprise, and what are the key capabilities of a Cloud infrastructure are - using Oracle's Cloud Reference Architecture, which is part of the IT Strategies from Oracle (ITSO) Cloud Enterprise Technology Strategy ETS). Beverly Ballroom 21st Century SOA | Jeff Davies Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite's orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. We'll also take a special look at the convergence of SOA & BPM using Oracle's Unified technology stack. Hollywood Room 2:45 pm - 3:00 pm Break 3:00 pm - 4:00 pm Roundtable Discussion Beverly Ballroom 4:00 pm - 4:15 pm Closing Comments & Readouts from Roundtables Beverly Ballroom 4:15 pm - 5:00 pm Networking / Reception Beverly Ballroom Lounge Note: Session schedule and content subject to change.

Read the article

Oracle GoldenGate 12c - Leading Enterprise Replication

- by Doug Reid

Oracle GoldenGate 12c released on October 17th and includes several new cutting edge features that firmly establishes GoldenGate's leader position in the data replication space. In fact, this release more than doubles the performance of data delivery, supports Oracle's new multitenant database feature, it's more secure, has more options for high availability, and has made great strides to simplify the configuration and deployment of the product. Read through the press release if you haven't already and do not miss the quote from Cern's Eva Dafonte Perez, regarding Oracle GoldenGate 12c "….performs five times faster compared to previous GoldenGate versions and simplifies the management of a multi-tier environment" There are a variety of new and improved features in the Oracle GoldenGate 12c. Here are the highlights: Optimized for Oracle Database 12c - GoldenGate 12c is custom tailored to the unique capabilities of Oracle database 12c and out of the box GoldenGate 12c supports multitenant (pluggable database (PDB)) and non-consolidated deployments of Oracle Database 12c. The naming convention used by database 12c is now in three parts (PDB-name, schema-name, and object name). We have made changes to the GoldenGate capture process to support the new naming convention and streamlined the whole process so a single GoldenGate capture process is being used at the container level rather than at each individual PDB. By having the capture process at the container level resource usage and the number of processes are reduced. To view a conceptual architecture diagram click here. Integrated Delivery for the Oracle Database - Leveraging a lightweight streaming API built exclusively for Oracle GoldenGate 12c, this process distributes load, auto tunes the degree of parallelism, scales better, and delivers blinding rates of changed data delivery to the Oracle database. One of the goals for Oracle GoldenGate 12c was to reduce IT costs by simplifying the configuration and reduce the time to manage complex infrastructures. In previous versions of Oracle GoldenGate, customers would split transaction loads by grouping tables into multiple different delivery processes (click here to view the previous method). Each delivery process executed independently and without any interaction or knowledge of other delivery processes. This setup was complicated to configure and time consuming as the developer needed in-depth knowledge of the source and target schemas and the transaction profile. With GoldenGate 12c and Integrated Delivery we have made it easier to configure and faster to deploy. To view a conceptual architecture diagram of integrated delivery click here Coordinated Delivery for Non-Oracle Databases - Coordinated Delivery orchestrates high-speed apply processes and simplifies the configuration of GoldenGate for non-Oracle targets. In Oracle GoldenGate 12c a single delivery process is used with multiple threads (click here) and key events, such as primary key updates, event markers, DDL, etc, are coordinated between the various threads to insure that the transactions are applied in the same sequence as they were captured, all while delivery improved performance. Replication Between On-Premises and Cloud-Based systems. - The trend for business to utilize both on-premises and cloud-based systems is rising and businesses need to replicate data back and forth. GoldenGate 12c can be configured in a variety of ways to provide real-time replication when unrestricted or restricted (limited ports or HTTP tunneling) networks are between on-premises and cloud-based systems. Expanded Heterogeneity - It wouldn't be a GoldenGate release without new and improved platform support. Release 1 includes support for MySQL 5.6 and Sybase 15.7. Upcoming in the next release GoldenGate, support will be expanded for MS SQL Server, DB2, and Teradata. Tighter Security - Oracle GoldenGate 12c is integrated with the Oracle wallet to shield usernames and passwords using strong encryption and aliases. Customers accustomed to using the Oracle Wallet with other Oracle products will instantly be familiar with how to use this great new feature Expanded Oracle Application and Technology Support - GoldenGate can be used along with Oracle Coherence to enable real-time changed data feeds to the Coherence cache using Toplink and the Oracle GoldenGate JMS adapter. Plus, Oracle Advanced Customer Services (ACS) now offers a low downtime E-Business Suite platform and database migrations using GoldenGate as the enabling technology. Keep tuned for more blogs on the new features and the upcoming launch webcast where we will go into these new features in more detail. In the mean time make sure to read through our white paper "Oracle GoldenGate 12c Release 1 New Features Overview"

Read the article

WebLogic JDBC Use of Oracle Wallet for SSL

- by Steve Felts

Introduction Secure Sockets Layer (SSL) can be used to secure the connection between the middle tier “client”, WebLogic Server (WLS) in this case, and the Oracle database server. Data between WLS and database can be encrypted. The server can be authenticated so you have proof that the database can be trusted by validating a certificate from the server. The client can be authenticated so that the database only accepts connections from clients that it trusts. Similar to the discussion in an earlier article about using the Oracle wallet for database credentials, the Oracle wallet can also be used with SSL to store the keys and certificates. By using it correctly, clear text passwords can be eliminated from the JDBC configuration and client/server configuration can be simplified by sharing the wallet across multiple datasources. There is a very good Oracle Technical White Paper on using SSL with the Oracle thin driver at http://www.oracle.com/technetwork/database/enterprise-edition/wp-oracle-jdbc-thin-ssl-130128.pdf [LINK1]. The link http://www.oracle.com/technetwork/middleware/weblogic/index-087556.html [LINK2] describes how to use WebLogic Server with Oracle JDBC Driver SSL. The information in this article is a guide on what steps need to be taken in the variety of available options; use the links above for details. SSL from the driver to the database server is basically turned on by specifying a protocol of “tcps” in the URL. However, there is a fair amount of setup needed. Also remember that there is an overhead in performance. Creating the wallets The common use cases are 1. “data encryption and server-only authentication”, requiring just a trust store, or 2. “data encryption and authentication of both tiers” (client and server), requiring a trust store and a key store. It is recommended to use the auto-login wallet type so that clear text passwords are not needed in the datasource configuration to open the wallet. The store type for an auto-login wallet is “SSO” (Single Sign On), not “JKS” or “PKCS12” as in [LINK2]. The file name is “cwallet.sso”. Wallets are created using the orapki tool. They need to be created based on the usage (encryption and/or authentication). This is discussed in detail in [LINK1] in Appendix B or in the Advanced Security Administrator’s Guide of the Database documentation. Database Server Configuration It is necessary to update the sqlnet.ora and listener.ora files with the directory location of the wallet using WALLET_LOCATION. These files also indicate whether or not SSL_CLIENT_AUTHENTICATION is being used (true or false). The Oracle Listener must also be configured to use the TCPS protocol. The recommended port is 2484. LISTENER = (ADDRESS_LIST= (ADDRESS=(PROTOCOL=tcps)(HOST=servername)(PORT=2484))) WebLogic Server Classpath The WebLogic Server CLASSPATH must have three additional security files. The files that need to be added to the WLS CLASSPATH are $MW_HOME/modules/com.oracle.osdt_cert_1.0.0.0.jar $MW_HOME/modules/com.oracle.osdt_core_1.0.0.0.jar $MW_HOME/modules/com.oracle.oraclepki_1.0.0.0.jar One way to do this is to add them to PRE_CLASSPATH environment variable for use with the standard WebLogic scripts. Setting the Oracle Security Provider It’s necessary to enable the Oracle PKI provider on the client side. This can either be done statically by updating the java.security file under the JRE or dynamically by setting it in a WLS startup class using java.security.Security.insertProviderAt(new oracle.security.pki.OraclePKIProvider (), 3); See the full example of the startup class in [LINK2]. Datasource Configuration When creating a WLS datasource, set the PROTOCOL in the URL to tcps as in the following. jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=host)(PORT=port))(CONNECT_DATA=(SERVICE_NAME=myservice))) For encryption and server authentication, use the datasource connection properties: - javax.net.ssl.trustStore=location of wallet file on the client - javax.net.ssl.trustStoreType=”SSO” For client authentication, use the datasource connection properties: - javax.net.ssl.keyStore=location of wallet file on the client - javax.net.ssl.keyStoreType=”SSO” Note that the driver connection properties for the wallet require a file name, not a directory name. Active GridLink ONS over SSL For completeness, there is another SSL usage for WLS datasources. The communication with the Oracle Notification Service (ONS) for load balancing information and node up/down events can use SSL also. Create an auto-login wallet and use the wallet on the client and server. The following is a sample sequence to create a test wallet for use with ONS. orapki wallet create -wallet ons -auto_login -pwd ONS_Wallet orapki wallet add -wallet ons -dn "CN=ons_test,C=US" -keysize 1024 -self_signed -validity 9999 -pwd ONS_Wallet orapki wallet export -wallet ons -dn "CN=ons_test,C=US" -cert ons/cert.txt -pwd ONS_Wallet On the database server side, it’s necessary to define the walletfile directory in the file $CRS_HOME/opmn/conf/ons.config and run onsctl stop/start. When configuring an Active GridLink datasource, the connection to the ONS must be defined. In addition to the host and port, the wallet file directory must be specified. By not giving a password, a SSO wallet is assumed. Summary To use SSL with the Oracle thin driver without any clear text passwords, use an SSO Oracle Wallet. SSL support in the Oracle thin driver is available starting in 10g Release 2.

Read the article

ASP.NET: Using pickup directory for outgoing e-mails

- by DigiMortal

Sending e-mails out from web applications is very common task. When we are working on or test our systems with real e-mail addresses we don’t want recipients to receive e-mails (specially if we are using some subset of real data9. In this posting I will show you how to make ASP.NET SMTP client to write e-mails to disc instead of sending them out. SMTP settings for web application I have seen many times the code where all SMTP information is kept in app settings just to read them in code and give to SMTP client. It is not necessary because we can define all these settings under system.web => mailsettings node. If you are using web.config to keep SMTP settings then all you have to do in your code is just to create SmtpClient with empty constructor. var smtpClient = new SmtpClient(); Empty constructor means that all settings are read from web.config file. What is pickup directory? If you want drastically raise e-mail throughput of your SMTP server then it is not very wise plan to communicate with it using SMTP protocol. it adds only additional overhead to your network and SMTP server. Okay, clients make connections, send messages out and it is also overhead we can avoid. If clients write their e-mails to some folder that SMTP server can access then SMTP server has e-mail forwarding as only resource-eager task to do. File operations are way faster than communication over SMTP protocol. The directory where clients write their e-mails as files is called pickup directory. By example, Exchange server has support for pickup directories. And as there are applications with a lot of users who want e-mail notifications then .NET SMTP client supports writing e-mails to pickup directory instead of sending them out. How to configure ASP.NET SMTP to use pickup directory? Let’s say, it is more than easy. It is very easy. This is all you need. <system.net> <mailSettings> <smtp deliveryMethod="SpecifiedPickupDirectory"> <specifiedPickupDirectory pickupDirectoryLocation="c:\temp\maildrop\"/> </smtp> </mailSettings> </system.net> Now make sure you don’t miss come points: Pickup directory must physically exist because it is not created automatically. IIS (or Cassini) must have write permissions to pickup directory. Go through your code and look for hardcoded SMTP settings. Also take a look at all places in your code where you send out e-mails that there are not some custom settings used for SMTP! Also don’t forget that your mails will be written now to pickup directory and they are not sent out to recipients anymore. Advanced scenario: configuring SMTP client in code In some advanced scenarios you may need to support multiple SMTP servers. If configuration is dynamic or it is not kept in web.config you need to initialize your SmtpClient in code. This is all you need to do. var smtpClient = new SmtpClient(); smtpClient.DeliveryMethod = SmtpDeliveryMethod.SpecifiedPickupDirectory; smtpClient.PickupDirectoryLocation = pickupFolder; Easy, isn’t it? i like when advanced scenarios end up with simple and elegant solutions but not with rocket science. Note for IIS SMTP service SMTP service of IIS is also able to use pickup directory. If you have set up IIS with SMTP service you can configure your ASP.NET application to use IIS pickup folder. In this case you have to use the following setting for delivery method. SmtpDeliveryMethod.PickupDirectoryFromIis You can set this setting also in web.config file. <system.net> <mailSettings> <smtp deliveryMethod="PickupDirectoryFromIis" /> </mailSettings> </system.net> Conclusion Who was still using different methods to avoid sending e-mails out in development or testing environment can now remove all the bad code from application and live on mail settings of ASP.NET. It is easy to configure and you have less code to support e-mails when you use built-in e-mail features wisely.

Read the article

Team Foundation Server (TFS) Team Build Custom Activity C# Code for Assembly Stamping

- by Bob Hardister

For the full context and guidance on how to develop and implement a custom activity in Team Build see the Microsoft Visual Studio Rangers Team Foundation Build Customization Guide V.1 at http://vsarbuildguide.codeplex.com/ There are many ways to stamp or set the version number of your assemblies. This approach is based on the build number. namespace CustomActivities { using System; using System.Activities; using System.IO; using System.Text.RegularExpressions; using Microsoft.TeamFoundation.Build.Client; [BuildActivity(HostEnvironmentOption.Agent)] public sealed class VersionAssemblies : CodeActivity { /// <summary> /// AssemblyInfoFileMask /// </summary> [RequiredArgument] public InArgument<string> AssemblyInfoFileMask { get; set; } /// <summary> /// SourcesDirectory /// </summary> [RequiredArgument] public InArgument<string> SourcesDirectory { get; set; } /// <summary> /// BuildNumber /// </summary> [RequiredArgument] public InArgument<string> BuildNumber { get; set; } /// <summary> /// BuildDirectory /// </summary> [RequiredArgument] public InArgument<string> BuildDirectory { get; set; } /// <summary> /// Publishes field values to the build report /// </summary> public OutArgument<string> DiagnosticTextOut { get; set; } // If your activity returns a value, derive from CodeActivity<TResult> and return the value from the Execute method. protected override void Execute(CodeActivityContext context) { // Obtain the runtime value of the input arguments string sourcesDirectory = context.GetValue(this.SourcesDirectory); string assemblyInfoFileMask = context.GetValue(this.AssemblyInfoFileMask); string buildNumber = context.GetValue(this.BuildNumber); string buildDirectory = context.GetValue(this.BuildDirectory); // ** Determine the version number values ** // Note: the format used here is: major.secondary.maintenance.build // ----------------------------------------------------------------- // Obtain the build definition name int nameStart = buildDirectory.LastIndexOf(@"\") + 1; string buildDefinitionName = buildDirectory.Substring(nameStart); // Set the primary.secondary.maintenance values // NOTE: these are hard coded in this example, but could be sourced from a file or parsed from a build definition name that includes them string p = "1"; string s = "5"; string m = "2"; // Initialize the build number string b; string na = "0"; // used for Assembly and Product Version instead of build number (see versioning best practices: **TBD reference) // Set qualifying product version information string productInfo = "RC2"; // Obtain the build increment number from the build number // NOTE: this code assumes the default build definition name format int buildIncrementNumberDelimterIndex = buildNumber.LastIndexOf("."); b = buildNumber.Substring(buildIncrementNumberDelimterIndex + 1); // Convert version to integer values int pVer = Convert.ToInt16(p); int sVer = Convert.ToInt16(s); int mVer = Convert.ToInt16(m); int bNum = Convert.ToInt16(b); int naNum = Convert.ToInt16(na); // ** Get all AssemblyInfo files and stamp them ** // Note: the mapping of AssemblyInfo.cs attributes to assembly display properties are as follows: // - AssemblyVersion = Assembly Version - used for the assembly version (does not change unless p, s or m values are changed) // - AssemblyFileVersion = File Version - used for the file version (changes with every build) // - AssemblyInformationalVersion = Product Version - used for the product version (can include additional version information) // ------------------------------------------------------------------------------------------------------------------------------------------------ Version assemblyVersion = new Version(pVer, sVer, mVer, naNum); Version newAssemblyFileVersion = new Version(pVer, sVer, mVer, bNum); Version productVersion = new Version(pVer, sVer, mVer); // Setup diagnostic fields int numberOfReplacements = 0; string addedAssemblyInformationalAttribute = "No"; // Enumerate over the assemblyInfo version attributes foreach (string attribute in new[] { "AssemblyVersion", "AssemblyFileVersion", "AssemblyInformationalVersion" }) { // Define the regular expression to find in each and every Assemblyinfo.cs files (which is for example 'AssemblyVersion("1.0.0.0")' ) Regex regex = new Regex(attribute + @"$""\d+\.\d+\.\d+\.\d+""$"); foreach (string file in Directory.EnumerateFiles(sourcesDirectory, assemblyInfoFileMask, SearchOption.AllDirectories)) { string text = File.ReadAllText(file); // Read the text from the AssemblyInfo file // If the AsemblyInformationalVersion attribute is not in the file, add it as the last line of the file // Note: by default the AssemblyInfo.cs files will not contain the AssemblyInformationalVersion attribute if (!text.Contains("[assembly: AssemblyInformationalVersion(\"")) { string lastLine = Environment.NewLine + "[assembly: AssemblyInformationalVersion(\"1.0.0.0\")]"; text = text + lastLine; addedAssemblyInformationalAttribute = "Yes"; } // Search for the expression Match match = regex.Match(text); if (match.Success) { // Get file attributes FileAttributes fileAttributes = File.GetAttributes(file); // Set file to read only File.SetAttributes(file, fileAttributes & ~FileAttributes.ReadOnly); // Insert AssemblyInformationalVersion attribute into the file text if does not already exist string newText = string.Empty; if (attribute == "AssemblyVersion") { newText = regex.Replace(text, attribute + "(\"" + assemblyVersion + "\")"); numberOfReplacements++; } if (attribute == "AssemblyFileVersion") { newText = regex.Replace(text, attribute + "(\"" + newAssemblyFileVersion + "\")"); numberOfReplacements++; } if (attribute == "AssemblyInformationalVersion") { newText = regex.Replace(text, attribute + "(\"" + productVersion + " " + productInfo + "\")"); numberOfReplacements++; } // Publish diagnostics to build report (diagnostic verbosity only) context.SetValue(this.DiagnosticTextOut, " Added AssemblyInformational Attribute: " + addedAssemblyInformationalAttribute + " Number of replacements: " + numberOfReplacements + " Build number: " + buildNumber + " Build directory: " + buildDirectory + " Build definition name: " + buildDefinitionName + " Assembly version: " + assemblyVersion + " New file version: " + newAssemblyFileVersion + " Product version: " + productVersion + " AssemblyInfo.cs Text Last Stamped: " + newText); // Write the new text in the AssemblyInfo file File.WriteAllText(file, newText); // restore the file's original attributes File.SetAttributes(file, fileAttributes); } } } } } }

Search Results

Search found 11195 results on 448 pages for 'disconnected environment'.

Page 411/448 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418 | Next Page >

- by Jürgen Kress

- by AndrasF

- by david.talamelli

- by terje

- by ShawnBailey

- by delabassee

- by Brian Jackett

- by Mike Stiles

- by wcoekaer

- by Davide Mauri

- by Christie Flanagan

- by Enrique Lima

- by user9147039

- by BuckWoody

- by John Blumenauer

- by Bil Simser

- by fernando

- by Brian

- by Steven Chan (Oracle Development)

- by aspiringgeek

- by Bob Rhubart

- by Doug Reid

- by Steve Felts

- by DigiMortal

- by Bob Hardister

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418 | Next Page >