e business suite - Page 412

E 2.0 Value Metaphors

- by Tom Tonkin

I guess I have been doing this too long. I can easily see the value of Enterprise 2.0 technology for an organization, but find it a challenge at times to convey that same value to others. I also know that I'm not the only one that has that issue. Others, that have that same passion, also suffer from being, perhaps, too close to the market. I was having this same discussion with a few colleagues when one of them suggested that metaphors might be a good vehicle to communicate the value to those that are not as familiar. One such metaphor was discussed.Apparently,back in the early 50's, there was a great Air Force aviator and military strategist by the name of John Boyd. Without going into a ton of detail (you can search him on the internet), what made Colonel Boyd great was that he never lost a dog fight. As a matter of fact, they called him 'Forty-Second Boyd' since he claimed to be able to beat anyone in any type of aircraft in less than forty seconds, even if his aircraft was inferior to his opponents.His approach as was unique. He observed over time that there was a pattern on how aviators engaged in a dogfight. He called this method OODA. It describes how a person or, in our case, an organization, would react to an event. OODA is an acrostic for Observation, Orientation, Decision and Action. Again, there is a lot more on the internet about this.A pilot would go through this loop several times during a dogfight and Boyd would try to predict this loop and interrupt it by changing the landscape of the actual dogfight. This would give Boyd an advantage and be able to predict what his opponent would do and then counterattack.Boyd went on to say that many companies have a similar reaction loop and that by understanding that loop, organizations would be able to adjust better to market conditions, predict what the competition is doing and reposition themselves to gain competitive advantages. So, our metaphor would be that Enterprise 2.0 provides companies greater visibility of their business by connecting to employees, customers and partners in a collaborative fashion. This, in turn, helps them navigate through the tough times and provide lines of sight to more innovative ideas. Innovation is that last tool for companies to achieve competitive advantage (maybe a discusion for another post).Perhaps this is more wordy than some other metaphor, but it does allow for an interesting dialogue to start and maybe even a framwork to fullfill the promise of E 2.0. So, I'm sure there are many more metaphors for the value that E 2.0 brings to organzaitons. Do you have one to share? Please comment below and thanks for stopping by.

Read the article

Is 4-5 years the “Midlife Crisis” for a programming career?

- by Jeff

I’ve been programming C# professionally for a bit over 4 years now. For the past 4 years I’ve worked for a few small/medium companies ranging from “web/ads agencies”, small industry specific software shops to a small startup. I've been mainly doing "business apps" that involves using high-level programming languages (garbage collected) and my overall experience was that all of the works I’ve done could have been more professional. A lot of the things were done incorrectly (in a rush) mainly due to cost factor that people always wanted something “now” and with the smallest amount of spendable money. I kept on thinking maybe if I could work for a bigger companies or a company that’s better suited for programmers, or somewhere that's got the money and time to really build something longer term and more maintainable I may have enjoyed more in my career. I’ve never had a “mentor” that guided me through my 4 years career. I am pretty much blog / google / self taught programmer other than my bachelor IT degree. I’ve also observed another issue that most so called “senior” programmer in “my working environment” are really not that senior skill wise. They are “senior” only because they’ve been a long time programmer, but the code they write or the decisions they make are absolutely rubbish! They don't want to learn, they don't want to be better they just want to get paid and do what they've told to do which make sense and most of us are like that. Maybe that’s why they are where they are now. But I don’t want to become like them I want to be better. I’ve run into a mental state that I no longer intend to be a programmer for my future career. I started to think maybe there are better things out there to work on. The more blogs I read, the more “best practices” I’ve tried the more I feel I am drifting away from “my reality”. But I am not a great programmer otherwise I don't think I am where I am now. I think 4-5 years is a stage that can be a step forward career wise or a step out of where you are. I just wanted to hear what other have to say about what I’ve mentioned above and whether you’ve experienced similar situation in your past programming career and how you dealt with it. Thanks.

Read the article

Change the User Interface Language in Vista or Windows 7

- by Matthew Guay

Would you like to change the user interface language in any edition of Windows 7 or Vista on your computer? Here’s a free app that can help you do this quickly and easily. If your native language is not the one most spoken in your area, you’ve likely purchased a PC with Windows preinstalled with a language that is difficult or impossible for you to use. Windows 7 and Vista Ultimate include the ability to install multiple user interface languages and switch between them. However, all other editions are stuck with the language they shipped with. With the free Vistalizator app, you can add several different interface languages to any edition of Vista or Windows 7 and easily switch between them. Note: In this test, we used an US English copy of both Windows 7 Home Premium and Windows Vista Home Premium, and it works the same on any edition. The built-in language switching in the Ultimate Editions lets you set a user interface language for each user account, but this will only switch it for all users. Add a User Interface Language to Windows To add an interface language to any edition of Windows 7 and Vista, first download Vistalizator (link below). Then, from the same page, download the language pack of your choice. The language packs are specific for each service pack of Windows, so make sure to choose the correct version and service pack you have installed. Once the downloads are finished, launch the Vistalizator program. You do not need to install it; simply run it and you’re ready to go. Click the Add languages button to add a language to Windows. Select the user interface language pack you downloaded, and click Open. Depending on the language you selected, it may not automatically update with Windows Update when a service pack is released. If so, you will have to remove the language pack and reinstall the new one for that service pack at that time. Click Ok to continue. Make sure you’ve selected the correct language, and click Install language. Vistalizator will extract and install the language pack. This took around 5 to 10 minutes in our test. Once the language pack is installed, click Yes to make it the default display language. Now, you have two languages installed in Windows. You may be prompted to check for updates to the language pack; if so, click Update languages and Vistalizator will automatically check for and install any updates. When finished, exit Vistalizator to finish switching the language. Click Yes to automatically reboot and apply the changes. When you computer reboots, it will show your new language, which in our test is Thai. Here’s our Windows 7 Home Premium machine with the Thai language pack installed and running. You can even add a right to left language, such as Arabic, to Windows. Simply repeat the steps to add another language pack. Vistalizator was originally designed for Windows Vista, and works great with Windows 7 too. The language packs for Vista are larger downloads than their Windows 7 counterparts. Here’s our Vista Home Premium in English… And here’s how it looks after installing the Simplified Chinese language pack with Vistalizator. Revert to Your Original Language If you wish to return to the language that your computer shipped with, or want to switch to another language you’ve installed, run Vistalizator again. Select the language you wish to use, and click Change language. When you close Vistalizator, you will again be asked to reboot. Once you’ve rebooted, you’ll see your new (or original) language ready to use. Here’s our Windows 7 Home Premium desktop, back in it’s original English interface. Conclusion This is a great way to change your computer’s language into your own native language, and is especially useful for expatriates around the world. Also, if you’d like to simply change or add an input language instead of changing the language throughout your computer, check out our tutorial on How to Add Keyboard Languages to XP, Vista, and Windows 7. Download Vistalizator Similar Articles Productive Geek Tips Enable Military Time in Windows 7 or VistaWhy Does My Password Expire in Windows?Use Windows Vista Aero through Remote Desktop ConnectionDisable User Account Control (UAC) the Easy Way on Win 7 or VistaAdd keyboard languages to XP, Vista, and Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

Read the article

From Trailer to Cloud: Skire acquisition expands Oracle’s on-demand project management options.

- by Melissa Centurio Lopes

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Alison Weiss Whether building petrochemical facilities in the Middle East or managing mining operations in Australia, project managers face significant challenges. Local regulations and currencies, contingent labor, hybrid public/private funding sources, and more threaten project budgets and schedules. According to Mike Sicilia, senior vice president and general manager for the Oracle Primavera Global Business Unit, there will be trillions of dollars invested in industrial projects around the globe between 2012 and 2016. But even with so much at stake, project leads don’t always have time to look for new and better enterprise project portfolio management (EPPM) software solutions to manage large-scale capital initiatives across the enterprise. Oracle’s recent acquisition of Skire, a leading provider of capital program management and facilities management applications available both in the cloud and on premises, gives customers outstanding new EPPM options. By combining Skire’s cloud-based solutions for managing capital projects, real estate, and facilities with Oracle’s Primavera EPPM solutions, project managers can quickly get a solution running that is interoperable across an extended enterprise. Staff can access the EPPM solution within days, rather than waiting for corporate IT to put technology in place. “Staff can access the EPPM solution within days, rather than waiting for corporate IT to put technology in place,” says Sicilia. This applies to a problem that has, according to Sicilia, bedeviled project managers for decades: extending EPPM functionality into the field. Frequently, large-scale projects are remotely located, and the lack of communications and IT infrastructure threatened the accuracy of project reporting and scheduling. Read the full version of this article in the November 2012 edition of Oracle's Profit Magazine: Special Report on Project Management

Read the article

Japan Welcomes Oracle Enterprise Manager 12c

- by Anand Akela

Following Oracle’s grand unveiling of Oracle Enterprise Manager 12c at Oracle OpenWorld 2011 in San Francisco, Oracle Japan just completed their launch for the product. Leng Tan, Oracle VP of Products, delivered the keynote with collaboration from a number of key partners in the region. From left to right: Leng Tan, VP of Products, Oracle; Shinyashiki-san, Assistant General Manager, NEC; Fuketa-san, General Manager, HITACHI; Fujii-san, General Manager, Fujitsu; Misawa-san, VP of Alliances, Oracle Japan NEC, Hitachi and Fujitsu have been among Oracle’s most active partners in the Japan region. They have received key awards from Oracle Japan for their efforts. NEC received the partner of the year award for 2010 and 2011. Hitachi received the partner of the year award for Oracle Enterprise Manager in 2011. Fujitsu received awards in the areas of Database and Oracle Exadata in 2011. All three partners were active participants in Oracle Enterprise Manager 12c beta program. According to Hirai-san, the technical lead at the event, there were over 200 attendees. “The event was so well-attended; there was no room to stand.” Said Hirai-san. Hirai-san demonstrating Oracle Enterprise Manager 12c at the Oracle Japan launch Here’s the highlight of the presentations made by the Oracle partners during this launch. NEC has developed an Oracle Enterprise Manager Plug-in for iStorage (NEC SAN Storage product). Additionally, NEC’s WebSAM Invariant Analyzer management tool is now capable of integrating with Oracle Enterprise Manager HITACHI demonstrated monitoring capabilities for Oracle Exadata through Oracle Enterprise Manager in their JP1 system management tool Fujitsu’s Oracle Enterprise Manager 10g adapter for their SystemWalker tool has now been enhanced to work with Oracle Enterprise Manager 12c. Following a very successful launch in Japan, Oracle’s Total Cloud Control road show and additional Oracle Enterprise Manager 12c launches continue in the EMEA and Asia Pacific regions. This week Sushil Kumar, VP of Product Strategy and Business Development is scheduled to deliver the keynotes at several cities in India. Also this week, Richard Sarwal, SVP of Products, is scheduled to deliver a keynote at the DOAG conference in Nuremburg, Germany. Richard is also delivering the Oracle Enterprise Manger 12c launch event keynote in Paris on November 18th. Check out our event schedule for Oracle Enterprise Manager 12c events across the globe! For more information, please go to Oracle Enterprise Manager web page or follow us at : Twitter Facebook YouTube Linkedin

Read the article

Part 2: The Customization Lifecycle

- by volker.eckardt(at)oracle.com

To understand the challenges when working with Customizations better, please allow me to explain my understanding from the Customization Lifecycle. The starting point is the functional GAP list. Any GAP can lead to a customization (but not have to). The decision is driven by priority, gain, costs, future functionality, accepted workarounds etc. Let's assume the customization has been accepted as such - including estimation. (Otherwise this blog would not have any value)Now the customization life-cycle starts and could look like this:- Functional specification- Technical specification- Technical development- Functional setup- Module Test- System Test- Integration Test (if required)- Acceptance Test- Production mode- Usage- 10 x Rework- 10 x Retest - 2 x Upgrade- 2 x Upgrade Test- Usage- 10 x Rework- 10 x Retest - 1 x Upgrade- 1 x Upgrade Test- Usage- Review for Retirement- Accepted Retirement- De-installationWhat I like to highlight herewith is that any material and documentation you create upfront or during the first phases will usually be used multiple times, partial or complete, will be enhanced, reviewed, retested. The better the quality right from the beginning is, the better we can perform the next steps.What I see very often is the wish to remove a customization, our customers are upgrading and they like to get at least some of the customizations replaced with standard functionality. To be able to support this process best, the customization documentation should contain at least the following key information: What is/are the business process(es) where this customization is used or linked to?Who was involved in the different customization phases?What are the objects comprising the customization?What is the setup necessary for the customization?What setup comes with the customization, what has to be done via other tools or manually?What are the test steps and test results (in all test areas)?What are linked customizations? What is the customization complexity?How is this customization classified?Which technologies were used?How many days were needed to create/test/upgrade the customization?Etc.If all this is available, a replacement / retirement can be done much more efficient and precise, or an estimation and upgrade itself can be executed with much better support.In the following blog entries I will explain in more detail why we suggest tracking such information, by whom this task shall be done and how.Volker Eckardt

Read the article

Guidance and Pricing for MSDN 2010

- by John Alexander

Sorry for the rather lengthy post here. I get asked this all the time so I decided to post it…Visual Studio 2010 editions will be available on April 12, 2010. Product Features Professional with MSDN Essentials Professional with MSDN Premium with MSDN Ultimate with MSDN Test Professional with MSDN Debugging and Diagnostics IntelliTrace (Historical Debugger) Static Code Analysis Code Metrics Profiling Debugger Testing Tools Unit Testing Code Coverage Test Impact Analysis Coded UI Test Web Performance Testing Load Testing1 Microsoft Test Manager 2010 Test Case Management2 Manual Test Execution Fast-Forward for Manual Testing Lab Management Configuration3 Integrated Development Environment Multiple Monitor Support Multi-Targeting One Click Web Deployment JavaScript and jQuery Support Extensible WPF-Based Environment Database Development Database Deployment Database Change Management2 Database Unit Testing Database Test Data Generation Data Access Development Platform Support Windows Development Web Development Office and SharePoint Development Cloud Development Customizable Development Experience Architecture and Modeling Architecture Explorer UML® 2.0 Compliant Diagrams (Activity, Use Case, Sequence, Class, Component) Layer Diagram and Dependency Validation Read-only diagrams (UML, Layer, DGML Graphs) Lab Management Virtual environment setup & tear down3 Provision environment from template3 Checkpoint environment3 Team Foundation Server Version Control2 Work Item Tracking2 Build Automation2 Team Portal2 Reporting & Business Intelligence2 Agile Planning Workbook2 Microsoft Visual Studio Team Explorer 2010 Test Case Management2 MSDN Subscription – Software and Services for Production Use Windows Azure Platform 20 hrs/mo † 50 hrs/mo † 100 hrs/mo † 250 hrs/mo † n/a Microsoft Visual Studio Team Foundation Server 2010 Microsoft Visual Studio Team Foundation Server 2010 CAL 1 1 1 1 Microsoft Expression Studio 3 Microsoft Office Professional Plus 2010, Project Professional 2010, Visio Premium 2010 (following Office 2010 launch) MSDN Subscription – Software for Development and Testing 4 Windows 7, Windows Server 2008 R2 and SQL Server 2008 Toolkits, Software Development Kits, Driver Development Kits Previous versions of Windows (client and server operation systems) Previous versions of Microsoft SQL Server Microsoft Office Microsoft Dynamics All other Servers Windows Embedded operating systems Teamprise MSDN Subscription – Other Benefits Technical support incidents 0 2 4 4 2 Priority support in MSDN Forums Microsoft e-learning collections (typically 10 courses or 20 hours) 0 1 2 2 1 MSDN Flash newsletter MSDN Online Concierge MSDN Magazine System Requirements View View View View View Buy from (MSRP) $799 $1,199 $5,469 $11,899 $2,169 Renew from (MSRP) $549 (upgrade) $799 $2,299 $3,799 $899 † Availability varies by country and subscription level. Details available on the MSDN site 1. May require one or more Microsoft Visual Studio Load Test Virtual User Pack 2010 2. Requires Team Foundation Server and a Team Foundation Server CAL 3. Requires Microsoft Visual Studio Lab Management 2010 4. Per-user license allows unlimited installations and use for designing, developing, testing, and demonstrating applications. UML is a registered trademark of Object Management Group, Inc. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

Read the article

The softer side of BPM

- by [email protected]

BPM and RTD are great complementary technologies that together provide a much higher benefit than each of them separately. BPM covers the need for automating processes, making sure that there is uniformity, that rules and regulations are complied with and that the process runs smoothly and quickly processes the units flowing through it. By nature, this automation and unification can lead to a stricter, less flexible process. To avoid this problem it is common to encounter process definition that include multiple conditional branches and human input to help direct processing in the direction that best applies to the current situation. This is where RTD comes into play. The selection of branches and conditions and the optimization of decisions is better left in the hands of a system that can measure the results of its decisions in a closed loop fashion and make decisions based on the empirical knowledge accumulated through observing the running of the process.When designing a business process there are key places in which it may be beneficial to introduce RTD decisions. These are:Thresholds - whenever a threshold is used to determine the processing of a unit, there may be an opportunity to make the threshold "softer" by introducing an RTD decision based on predicted results. For example an insurance company process may have a total claim threshold to initiate an investigation. Instead of having that threshold, RTD could be used to help determine what claims to investigate based on the likelihood they are fraudulent, cost of investigation and effect on processing time.Human decisions - sometimes a process will let the human participants make decisions of flow. For example, a call center process may leave the escalation decision to the agent. While this has flexibility, it may produce undesired results and asymetry in customer treatment that is not based on objective functions but subjective reasoning by the agent. Instead, an RTD decision may be introduced to recommend escalation or other kinds of treatments.Content Selection - a process may include the use of messaging with customers. The selection of the most appropriate message to the customer given the content can be optimized with RTD.A/B Testing - a process may have optional paths for which it is not clear what populations they work better for. Rather than making the arbitrary selection or selection by committee of the option deeped the best, RTD can be introduced to dynamically determine the best path for each unit.In summary, RTD can be used to make BPM based process automation more dynamic and adaptable to the different situations encountered in processing. Effectively making the automation softer, less rigid in its processing.

Read the article

Upgrading to Oracle Enterprise Manager 12c Release 2: Top Tips One Must Know

- by AnkurGupta

Recently Oracle announced incremental release of Enterprise Manager 12c called Enterprise Manager 12c Release 2 (EM12c R2) which includes several new exciting features (Press announcement). Right before the official release, we upgraded an internal production site from EM 12c R1 to EM 12c R2 and had an extremely pleasant experience. Let me share few key takeaways as well as few tips from this upgrade exercise. I - Why Should You Upgrade To Enterprise Manager 12c Release 2 While an upgrade is usually recommended primarily to take benefit of the latest features (which is valid for this upgrade as well), I found several other compelling reasons purely from deployment perspective. Standardize your EM deployment: Enterprise Manager comprises of several different components (OMS, agents, plug-ins, etc) and it might be possible that these are at varied patch levels in your environment. For instance, in case of an environment containing Bundle Patch 1 (customer announcement), there is a good chance that you may not have all the components up-to-date. There are two possible reasons. Bundle Patch 1 involved patching different components (OMS, agents, plug-ins) with multiple one-off patches which may not have been applied to all components yet. Bundle Patch 1 for different platforms were not released together. Which means you may not have got the chance to patch all the components on different platforms. Note: BP1 patches are not mandatory to upgrade to EM12c R2 release EM 12c R2 provides an excellent opportunity to standardize your Cloud Control environment (OMS, repository and agents) and plug-ins to latest versions in single shot. All platform releases are made available simultaneously: For the very first time in the history of EM release, all the platforms were released on day one itself, which means you do not need to wait for platform specific binaries for EM OMS or Agent to perform install or upgrades in a heterogeneous environment. Highly refined and automated process – Upgrade process is by far the smoothest and the cleanest as compared to previous releases of Enterprise manager. Following are the ones that stand out. Automatic Plug-in management – Plug-in upgrade along with new plug-in deployment is supported in upgrade installer wizard which means bulk of the updates to OMS and repository can be done in the same workflow. Saves time and minimizes user inputs. Plug-in Upgrade or Migrate Auto Update: While doing the OMS and repository upgrade, you can use Auto Update screen in Oracle Universal Installer to check for any updates/patches. That will help you to avoid the know issues and will make sure that your upgrade is successful. Allows mass upgrade of EM Agents – A new dedicated menu has been added in the EM console for agent upgrade. Agent upgrade workflow is extremely simple that requires agent name as the only input. ADM / JVMD Manager/Agent upgrade – complete process is supported via UI screens. EM12c R2 Upgrade Guide is much simpler to follow as compared to those for earlier releases. This is attributed to the simpler upgrade process. Robust and Performing Platform: EM12c R2 release not only includes several new features, but also provides a more stable platform which incorporates several fixes and enhancements in the Enterprise Manager framework. II - Few Tips To Remember In my last post (blog link) I shared few tips and tricks from my experience applying the Bundle Patch. Recently I upgraded the same site to EM 12c R2 and found few points that you must take note of, while planning this upgrade. The tips below are also applicable to EM 12c R1 environments that do not have Bundle Patch 1 patches applied. Verify the monitored application certification – Specific targets like E-Business Suite have not yet been certified as managed target in EM 12c R2. Therefore make sure to recheck the Enterprise Manager certification Matrix on My Oracle Support before planning the upgrade. Plan downtime – Because EM 12c R2 is an incremental release of EM 12c, for EM 12c R1 to EM 12c R2 upgrade supports only 1-system upgrade approach, which mean there will be downtime. OMS name change after upgrade – In case of multi OMS environments, additional OMS is renamed after upgrade, which has few implications when you upgrade JVMD and ADP agents on OMS. This is well documented in upgrade guide but make sure you read through all the notes. Upgrading BI Publisher– EM12c R2 is certified with BI Publisher 11.1.1.6.0 only. Therefore in case you are using EM 12c R1 which is integrated with BI Publisher 11.1.1.5.0, you must upgrade the BI Publisher to 11.1.1.6.0. Follow the steps from Advanced Installation and Configuration Guide here. Perform Post upgrade Tasks – Make sure to perform post upgrade steps mentioned in documentation here. These include critical changes that must be done right after upgrade to get the right configuration. For instance Database plug-in should be upgraded to Revision 3 (12.1.0.2.0 [u120804]). Delete old OMS Home – EM12c R1 to EM12c R2 is an out of place upgrade, which means it creates a new oracle home for OMS, plug-ins, etc. Therefore please ensure that You have sufficient extra space for new OMS before starting the upgrade process. You clean up the old OMS home after the upgrade process. Steps are available here. DO NOT remove the agent home on OMS host, because agent is upgraded in-place. If you have standby OMS setup then do look into the steps to upgrade the standby OMS from the upgrade guide before going ahead. Read the right documentation – Make sure to follow the Upgrade guide which provides the most comprehensive information on EM12c R2 upgrade process. Additionally you can refer other resources to get familiar with upgrade concepts. Recorded webcast - Oracle Enterprise Manager Cloud Control 12c Release 2 Installation and Upgrade Overview Presentation - Understanding Enterprise Manager 12.1.0.2 Upgrade We are very excited about this latest release and will look forward to hear back any feedback from your upgrade experience!

Read the article

How to Increase the VMWare Boot Screen Delay

- by Trevor Bekolay

If you’ve wanted to try out a bootable CD or USB flash drive in a virtual machine environment, you’ve probably noticed that VMWare’s offerings make it difficult to change the boot device. We’ll show you how to change these options. You can do this either for one boot, or permanently for a particular virtual machine. Even experienced users of VMWare Player or Workstation may not recognize the screen above – it’s the virtual machine’s BIOS, which in most cases flashes by in the blink of an eye. If you want to boot up the virtual machine with a CD or USB key instead of the hard drive, then you’ll need more than an eye’s-blink to press Escape and bring up the Boot Menu. Fortunately, there is a way to introduce a boot delay that isn’t exposed in VMWare’s graphical interface – you have to edit the virtual machine’s settings file (a .vmx file) manually. Editing the Virtual Machine’s .vmx Find the .vmx file that contains the settings for your virtual machine. You chose a location for this when you created the virtual machine – in Windows, the default location is a folder called My Virtual Machines in your My Documents folder. In VMWare Workstation, the location of the .vmx file is listed on the virtual machine’s tab. If in doubt, search your hard drive for .vmx files. If you don’t want to use Windows default search, an awesome utility that locates files instantly is Everything. Open the .vmx file with any text editor. Somewhere in this file, enter in the following line… save the file, then close out of the text editor: bios.bootdelay = 20000 This will introduce a 20 second delay when the virtual machine loads up, giving you plenty of time to press the Escape button and access the boot menu. The number in this line is just a value in milliseconds, so for a five second boot delay, enter 5000, and so on. Change Boot Options Temporarily Now, when you boot up your virtual machine, you’ll have plenty of time to enter one of the keystrokes listed at the bottom of the BIOS screen on boot-up. Press Escape to bring up the Boot Menu. This allows you to select a different device to boot from – like a CD drive. Your selection will be forgotten the next time you boot up this virtual machine. Change Boot Options Permanently When the BIOS screen comes up, press F2 to enter the BIOS Setup menu. Switch to the Boot tab, and change the ordering of the items by pressing the “+” key to move items up on the list, and the “-” key to move items down the list. We’ve switched the order so that the CD-ROM Drive boots first. Once you make this change permanent, you may want to re-edit the .vmx file to remove the boot delay. Boot from a USB Flash Drive One thing that is noticeably missing from the list of boot options is a USB device. VMWare’s BIOS just does not allow this, but we can get around that limitation using the PLoP Boot Manager that we’ve previously written about. And as a bonus, since everything is virtual anyway, there’s no need to actually burn PLoP to a CD. Open the settings for the virtual machine you want to boot with a USB drive. Click on Add… at the bottom of the settings screen, and select CD/DVD Drive. Click Next. Click the Use ISO Image radio button, and click Next. Browse to find plpbt.iso or plpbtnoemul.iso from the PLoP zip file. Ensure that Connect at power on is checked, and then click Finish. Click OK on the main Virtual Machine Settings page. Now, if you use the steps above to boot using that CD/DVD drive, PLoP will load, allowing you to boot from a USB drive! Conclusion We’re big fans of VMWare Player and Workstation, as they let us try out a ton of geeky things without worrying about harming our systems. By introducing a boot delay, we can add bootable CDs and USB drives to the list of geeky things we can try out. Download PLoP Boot Manager Similar Articles Productive Geek Tips How To Switch to Console Mode for Ubuntu VMware GuestHack: Turn Off Debug Mode in VMWare Workstation 6 BetaStart Your Computer More Quickly by Delaying the Startup of a Service in VistaEnable Hidden BootScreen in Windows VistaEnable Copy and Paste from Ubuntu VMware Guest TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

Read the article

3 Day Level 400 SQL Tuning Workshop 15 March in London, early bird and referral offer

- by sqlworkshops

I want to inform you that we have organized the "3 Day Level 400 Microsoft SQL Server 2008 and SQL Server 2005 Performance Monitoring & Tuning Hands-on Workshop" in London, United Kingdom during March 15-17, 2011.This is a truly level 400 hands-on workshop and you can find the Agenda, Prerequisite, Goal of the Workshop and Registration information at www.sqlworkshops.com/ruk. Charges are GBP 1800 (VAT excl.). Early bird discount of GBP 125 until 18 February. We are also introducing a new referral plan. If you refer someone who participates in the workshop you will receive an Amazon gift voucher for GBP 125.Feedback from one of the participants who attended our November London workshop:Andrew, Senior SQL Server DBA from UBS, UK, www.ubs.com, November 26, 2010:Rating: In a scale of 1 to 5 please rate each item below (1=Poor & 5=Excellent) Overall I was satisfied with the workshop 5 Instructor maintained the focus of the course 5 Mix of theory and practice was appropriate 5 Instructor answered the questions asked 5 The training facility met the requirement 5 How confident are you with SQL Server 2008 performance tuning 5 Additional comments from Andrew: The course was expertly delivered and backed up with practical examples. At the end of the course I felt my knowledge of SQL Server had been greatly enhanced and was eager to share with my colleagues. I felt there was one prerequisite missing from the course description, an open mind since the course changed some of my core product beliefs. For Additional workshop feedbacks refer to: www.sqlworkshops.com/feedbacks.I will be delivering the Level 300-400 1 Day Microsoft SQL Server 2008 Performance Monitoring and Tuning Seminar at Istanbul and Ankara, Turkey during March. This event is organized by Microsoft Turkey, let me know if you are in Turkey and would like to attend.During September 2010 I delivered this Level 300-400 1 Day Microsoft SQL Server 2008 Performance Monitoring and Tuning Seminar in Zurich, Switzerland organized by Microsoft Switzerland and the feedback was 4.85 out of 5, there were about 100 participants. During November 2010 when I delivered seminar in Lisbon, Portugal organized by Microsoft Portugal, the feedback was 8.30 out of 9, there were 130 participants.Our Mission: Empower customers to fully realize the Performance potential of Microsoft SQL Server without increasing the total cost of ownership (TCO) and achieve high customer satisfaction in every consulting engagement and workshop delivery.Our Business Plan: Provide useful content in webcasts, articles and seminars to get visibility for consulting engagements and workshop delivery opportunity. Help us by forwarding this email to your SQL Server friends and colleagues.Looking forwardR Meyyappan & Team @ www.SQLWorkshops.comLinkedIn: http://at.linkedin.com/in/rmeyyappan

Read the article

Demonstration VM BIC2g 2013-10 Partner Edition for Download

- by Mike.Hallett(at)Oracle-BI&EPM

Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 UPDATED ! The “BIC2g” demo VM (now version 2013-10) is downloadable from our BIC2g Beehive Online Workspace portal for OPN member partners. Compared to the prior version, Bic2g 2013-04, the new Bic2g 2013-10 has: OBIEE was upgraded from 11.1.1.7.0 to 11.1.1.7.1. with BI Mobile Application Designer (BIMAD) added. TimesTen was upgraded from 11.2.2.3.0 to 11.2.2.5.0 ODI Client 11.1.1.7.0 was installed, including a Standalone agent and empty repositories, and the BI Applications 11g ODI Repositories were included (BIAPPS_11g) Informatica and DAC were removed from image There are additional demos for BI-Apps and for Endeca. The compact deployment of EPM is installed and configured, including: Hyperion Foundation, Essbase, Essbase Studio, Essbase Administration Services, Provider Services, Calculation Manager, Planning, Reporting and Analysis, Financial Reporting, Web Analysis, and Workspace. The access details, for OPN member partners only, to get added to the BIC2G Beehive Online Workspace portal are shown from this page @ BI Solutions Engineering Partner Portal. This Oracle Business Intelligence Linux VM virtual appliance (“BIC2g”) was developed to support Oracle OBI, BI-Apps and EPM Hyperion sales and Oracle partners in product demonstrations, training activities and POC activities. If you do not need BI-Apps, then there is a slightly smaller VM OBI Sample-App you can get from OTN: see @ Oracle BI and EPM Demonstration SampleApp V309 on OTN. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

Read the article

The Missing Post

- by Joe Mayo

It’s somewhat of a mystery how the writing process can conjure up results that weren’t initially intended. Case in point is the fact that another post was planned to be in place of this one, but it never made the light of day. This particular post started off as an introduction to a technology I had just learned, used, and wanted to share the experience with others. The beginning was fun and demonstrated how easy it was to get started. One of the things I’ve been pondering over time is that the Web is filled with introductions to new technologies and quick first looks, so I set out to add more depth, share lessons learned, and generally help you avoid the problems I encountered along the way; problems being a key theme of why you aren’t reading that post at this very minute. Problems that curiously came from nowhere to thwart my good intentions. Success was sweet when using the tool for the prototypical demo scenario. The thing is, I intended the tool to accomplish a real task. Having embarked on the path toward getting the job done, glitches began creeping into the process. Realizing that this was all a bit new, I had patience and found a suitable work-around, but this was to be short lived. As in marching ants to a freshly laid out picnic, the problems kept coming until I had to get up and walk away. Not to be outdone, sheer will and brute force manual intervention led to mission accomplishment. Though I kept a positive outlook and was pleased at the final result, the process of using the tool had somewhat soured. Regardless of a less than stellar experience with the tool, I have a great deal of respect for the company that produced it and the people who built it. Perhaps I empathize for what they might feel after reading a post that details such deficiencies in their product. Sure, if you’re in this business, you’ve got to have a thick skin; brush it off, fix the problem, and move on to greatness. But, today I feel like they’re people and are probably already aware of any issues I would seemingly reveal. Anyone who builds a product or provides a service takes a lot of pride in what they do. Sometimes they screw up and if their worth a dime, they make it up. I think that will happen in this case and there’s no reason why I should post information that has the potential to sound more negative than helpful. While no one would ever notice or care either way, I’m posting something that won’t harm. Joe

Read the article

Building InstallShield based Installers using Team Build 2010

- by jehan

Last few weeks, I have been working on Application Packaging stuff using all the widely used tools like InstallShield, WISE, WiX and Visual Studio Installer. So, I thought it would be good to post about how to Build the Installers developed using these tools with Team Build 2010. This post will focus on how to build the InstallShield generated packages using Team Build 2010. For the release of VS2010, Microsoft has partnered with Flexera who are the makers of InstallShield to create InstallShield Limited Edition, especially for the customers of Visual Studio. First Microsoft planned to release WiX (Windows Installer Xml) with VS2010, but later Microsoft dropped WiX from VS2010 due to reasons which are best known to them and partnered with InstallShield for Limited Edition. It disappointed lot of people because InstallShield Limited Edition provides only few features of InstallShield and it may not feasable to build complex installer packages using this and it also requires License, where as WiX is an open source with no license costs and it has proved efficient in building most complex packages. Only the last three features are available in InstallShield Limited Edition from the total features offered by InstallShield as shown in below list. Feature Limited Edition for Visual Studio 2010 Standalone Build System Maintain a clean build machine by using only the part of InstallShield that compiles the installations. InstallShield Best Practices Validation Suite Avoid common installation issues. Try and Die Functionality RCreate a fully functional trial version of your product. InstallShield Repackager Create Windows Installer setups from any legacy installation. Multilingual Support Present installation text in up to 35 languages. Microsoft App-V™ Support Deploy your applications as App-V virtual packages that run without conflict. Industry-Standard InstallScript Achieve maximum flexibility in your installations. Dialog Editor Modify the layout of existing end-user dialogs, create new custom dialogs, and more. Patch Creation Build updates and patches for your products. Setup Prerequisite Editor Easily control prerequisite restart behavior and source locations. String Editor View Control the localizable text strings displayed at run time with this spreadsheet-like table. Text File Changes View Configure search-and-replace actions for content in text files to be modified at run time. Virtual Machine Detection Block your installations from running on virtual machines. Unicode Support Improve multi-language installation development. Support for 64-Bit COM Extraction Extract COM data from a 64-bit COM server. Windows Installer Installation Chaining Add MSI packages to your main installation and chain them together. XML Support Save time by quickly testing XML configuration changes to installation projects. Billboard Support for Custom Branding Display Adobe Flash billboards and other graphic files during the install process. SaaS Support (IIS 7 and SSL Technologies) Easily deploy Windows-based Web applications. Project Assistant Jumpstart a project by using a simplified set of views. Support for Digital Signatures Save time by digitally signing all your files at build time. Easily Run Custom Actions Schedule a custom action to run at precisely the right moment in your installation. Installation Prerequisites Check for and install prerequisites before your installation is executed. To create a InstallShield project in Visual Studio and Build it using Team Build 2010, first you have to add the InstallShield Project template to your Solution file. If you want to use InstallShield Limited edition you can add it from FileàNewà project àother Project Types àSetup and Deploymentà InstallShield LE and if you are using other versions of InstallShield, then you have to add it from from FileàNewà project àInstallShield Projects. Here, I’m using InstallShield 2011 Premier edition as I already have it Installed. I have created a simple package for TailSpin Application which has a Feature called Web, few components and a IIS Web Site for TailSpin application. Before started working on this, I thought I may need to build the package by calling invoke process activity in build process template or have to create a new custom activity. But, it got build without any changes to build process template. But, it was failing with below error message. C:\Program Files (x86)\MSBuild\InstallShield\2011\InstallShield.targets (68): The "InstallShield.Tasks.InstallShield" task could not be loaded from the assembly C:\Program Files (x86)\MSBuild\InstallShield\2010Limited\InstallShield.Tasks.dll. Could not load file or assembly 'file:///C:\Program Files(x86)\MSBuild\InstallShield\2011\InstallShield.Tasks.dll' or one of its dependencies. An attempt was made to load a program with an incorrect format. Confirm that the <UsingTask> declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask. This error is due to 64-bit build machine which I’m using. This issue will be replicable if you are queuing a build on a 64-bit build machine. To avoid this you have to ensure that you configured the build definition for your InstallShield project to load the InstallShield.Tasks.dll file (which is a 32-bit file); otherwise, you will encounter this build error informing you that the InstallShield.Tasks.dll file could not be loaded. To select the 32-bit version of MSBuild, click the Process tab of your build definition in Team Explorer. Then, under the Advanced node, find the MSBuild Platform setting, and select x86. Note that if you are using a 32-bit build machine, you can select either Auto or x86 for the MSBuild Platform setting. Once I did above changes, the build got successful.

Read the article

Oracle VM Deep Dives

- by rickramsey

"With IT staff now tasked to deliver on-demand services, datacenter virtualization requirements have gone beyond simple consolidation and cost reduction. Simply provisioning and delivering an operating environment falls short. IT organizations must rapidly deliver services, such as infrastructure-as-a-service (IaaS), platform-as-a-service (PaaS), and software-as-a-service (SaaS). Virtualization solutions need to be application-driven and enable:" "Easier deployment and management of business critical applications" "Rapid and automated provisioning of the entire application stack inside the virtual machine" "Integrated management of the complete stack including the VM and the applications running inside the VM." Application Driven Virtualization, an Oracle white paper That was published in August of 2011. The new release of Oracle VM Server delivers significant virtual networking performance improvements, among other things. If you're not sure how virtual networks work or how to use them, these two articles by Greg King and friends might help. Looking Under the Hood at Virtual Networking by Greg King Oracle VM Server for x86 lets you create logical networks out of physical Ethernet ports, bonded ports, VLAN segments, virtual MAC addresses (VNICs), and network channels. You can then assign channels (or "roles") to each logical network so that it handles the type of traffic you want it to. Greg King explains how you go about doing this, and how Oracle VM Server for x86 implements the network infrastructure you configured. He also describes how the VM interacts with paravirtualized guest operating systems, hardware virtualized operating systems, and VLANs. Finally, he provides an example that shows you how it all looks from the VM Manager view, the logical view, and the command line view of Oracle VM Server for x86. Fundamental Concepts of VLAN Networks by Greg King and Don Smerker Oracle VM Server for x86 supports a wide range of options in network design, varying in complexity from a single network to configurations that include network bonds, VLANS, bridges, and multiple networks connecting the Oracle VM servers and guests. You can create separate networks to isolate traffic, or you can configure a single network for multiple roles. Network design depends on many factors, including the number and type of network interfaces, reliability and performance goals, the number of Oracle VM servers and guests, and the anticipated workload. The Oracle VM Manager GUI presents four different ways to create an Oracle VM network: Bonds and ports VLANs Both bond/ports and VLANS A local network This article focuses the second option, designing a complex Oracle VM network infrastructure using only VLANs, and it steps through the concepts needed to create a robust network infrastructure for your Oracle VM servers and guests. More Resources Virtual Networking for Dummies Download Oracle VM Server for x86 Find technical resources for Oracle VM Server for x86 -Rick Follow me on: Blog | Facebook | Twitter | Personal Twitter | YouTube | The Great Peruvian Novel

Read the article

Create a Slide Show in Windows 7 Media Center

- by DigitalGeekery

Are you looking for a nice way to create and display a slide show from your photo collection? Today we’ll show you how to create a slide show, how to add music to it, and watch it from the comfort of your couch in Windows 7 Media Center. Create Slide Show Launch Windows 7 Media Center and click on the Picture Library tile found under Pictures and Videos. In the Pictures Library, scroll across to slide shows and click on Create Slide show. Enter a name for the slide show and click Next. If you are using a Windows Media Center remote, click on the OK button to bring up the onscreen keyboard. Use the directional buttons to navigate across the keyboard and press OK to select each letter. Click Done when finished. Select Picture Library and click Next. Select the pictures to include in your slide show. If using a remote, navigate through the images and press OK to select. If you are using a mouse, simply click on the selections. When you are finished, click Next. Now, we can review and edit the slide show. Click the up or down pointing arrows to move pictures up and down in the order. (more intuitive titles would be helpful in this case as opposed to the randomly generated titles in the example below) If you are finished, click Create. You can also choose to go back and add music to your slide show. (or even more pictures) We’ll take a look at adding some music in our example. Click on the Add More button. Add Music to Your Slide Show Here we’ll select Music Library to add a song. Click Next. You’ll now be able to browse your Music Library to select songs for your slide show. Select your songs and click Next. When you are finished adding Music and Pictures click Create. Once your slide show is saved, you can play it any time by going to clicking on slide shows in the Picture Library, then selecting the slide show title. Select play slide show when you’re ready to enjoy your new production. If you ever want to edit or delete the slide show, select it in the Picture Library, and scroll to Actions. You’ll see those option under additional commands. You have the option to Edit Slide Show, Burn a CD/DVD, or Delete. Editing Slide Show Settings Within Media Center, go to Tasks… Click on Pictures… Then choose Slide Shows. From the Slide Show settings you have the option to Show pictures in random order, Show picture information, Show song information, and Use Pan and zoom effect. You can also adjust the length of time to display each picture, and change the background color. Be sure to click Save to apply and changes before exiting. If you choose to show picture information, the picture title, date, and star rating will be displayed in the top right. If your slide show is accompanied by music and you choose to show song information, you will get a translucent overlay for a few seconds at the beginning of each song to indicate the song, album, and artist. One of the really cool things about creating a slide show in Windows 7 Media Center is you can complete the entire process using just a Media Center remote. Can’t get enough slide shows? Check out how to turn your desktop into a picture slide show in Windows 7. Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Add Color Coding to Windows 7 Media Center Program GuideIntegrate Boxee with Media Center in Windows 7Schedule Updates for Windows Media CenterTurn Your Desktop into a Picture Slideshow in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons

Read the article

SQL SERVER – Select and Delete Duplicate Records – SQL in Sixty Seconds #036 – Video

- by pinaldave

Developers often face situations when they find their column have duplicate records and they want to delete it. A good developer will never delete any data without observing it and making sure that what is being deleted is the absolutely fine to delete. Before deleting duplicate data, one should select it and see if the data is really duplicate. In this video we are demonstrating two scripts – 1) selects duplicate records 2) deletes duplicate records. We are assuming that the table has a unique incremental id. Additionally, we are assuming that in the case of the duplicate records we would like to keep the latest record. If there is really a business need to keep unique records, one should consider to create a unique index on the column. Unique index will prevent users entering duplicate data into the table from the beginning. This should be the best solution. However, deleting duplicate data is also a very valid request. If user realizes that they need to keep only unique records in the column and if they are willing to create unique constraint, the very first requirement of creating a unique constraint is to delete the duplicate records. Let us see how to connect the values in Sixty Seconds: Here is the script which is used in the video. USE tempdb GO CREATE TABLE TestTable (ID INT, NameCol VARCHAR(100)) GO INSERT INTO TestTable (ID, NameCol) SELECT 1, 'First' UNION ALL SELECT 2, 'Second' UNION ALL SELECT 3, 'Second' UNION ALL SELECT 4, 'Second' UNION ALL SELECT 5, 'Second' UNION ALL SELECT 6, 'Third' GO -- Selecting Data SELECT * FROM TestTable GO -- Detecting Duplicate SELECT NameCol, COUNT(*) TotalCount FROM TestTable GROUP BY NameCol HAVING COUNT(*) > 1 ORDER BY COUNT(*) DESC GO -- Deleting Duplicate DELETE FROM TestTable WHERE ID NOT IN ( SELECT MAX(ID) FROM TestTable GROUP BY NameCol) GO -- Selecting Data SELECT * FROM TestTable GO DROP TABLE TestTable GO Related Tips in SQL in Sixty Seconds: SQL SERVER – Delete Duplicate Records – Rows SQL SERVER – Count Duplicate Records – Rows SQL SERVER – 2005 – 2008 – Delete Duplicate Rows Delete Duplicate Records – Rows – Readers Contribution Unique Nonclustered Index Creation with IGNORE_DUP_KEY = ON – A Transactional Behavior What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

Read the article

OPN Exchange @ OpenWorld – Don’t Forget…

- by Kristin Rose

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Mark your calendar because we’re less than a week away from kicking off our first ever Oracle PartnerNetwork Exchange @ OpenWorld program, and do we have a lot in store for you! So don’t forget to attend these great partner events! Sunday, 9/30: The Global Partner Keynote with Judson Althoff and other senior executives @ 1:00pm OPN Exchange General Sessions to discuss the overview of each OPN Exchange track including, Cloud, Engineered Systems, Industries, Technology and Applications @ 3:30pm The exclusive OPN Exchange AfterDark Reception complete with the smooth sounds of Macy Gray @ 7:30pm. Don’t worry, there is plenty to come after Sunday! Be sure to take part in all the exciting activity taking place during the week, including: Over 40 + OPN Exchange Sessions taking place at the Marriott Marquis throughout the week “Test Fest” exams for OPN Specialist Certifications, taking place throughout the week The 5k Partner Fun Run- Meet at the W Hotel lobby on Monday 10/1 at 6 a.m. PT – No registration necessary! Led by Judson Althoff, SVP of WWA&C. Social Media Rally Station- Join us in the OPN Lounge on Monday to become social savvy and leverage social media tools for your business Ice Cream Social- Monday October 1st, from 3-5:30 p.m. in the OPN Lounge. Hosted by Oracle Advanced Customer Support Services. Endless Networking Opportunities at the OPN Lounge, the Howard Street Tent for lunch, the ‘It’s a Wrap Reception’, and much more! We can’t wait to see you there! The OPN Communications Team

Read the article

Big Data – Buzz Words: What is NoSQL – Day 5 of 21

- by Pinal Dave

In yesterday’s blog post we explored the basic architecture of Big Data . In this article we will take a quick look at one of the four most important buzz words which goes around Big Data – NoSQL. What is NoSQL? NoSQL stands for Not Relational SQL or Not Only SQL. Lots of people think that NoSQL means there is No SQL, which is not true – they both sound same but the meaning is totally different. NoSQL does use SQL but it uses more than SQL to achieve its goal. As per Wikipedia’s NoSQL Database Definition – “A NoSQL database provides a mechanism for storage and retrieval of data that uses looser consistency models than traditional relational databases.“ Why use NoSQL? A traditional relation database usually deals with predictable structured data. Whereas as the world has moved forward with unstructured data we often see the limitations of the traditional relational database in dealing with them. For example, nowadays we have data in format of SMS, wave files, photos and video format. It is a bit difficult to manage them by using a traditional relational database. I often see people using BLOB filed to store such a data. BLOB can store the data but when we have to retrieve them or even process them the same BLOB is extremely slow in processing the unstructured data. A NoSQL database is the type of database that can handle unstructured, unorganized and unpredictable data that our business needs it. Along with the support to unstructured data, the other advantage of NoSQL Database is high performance and high availability. Eventual Consistency Additionally to note that NoSQL Database may not provided 100% ACID (Atomicity, Consistency, Isolation, Durability) compliance. Though, NoSQL Database does not support ACID they provide eventual consistency. That means over the long period of time all updates can be expected to propagate eventually through the system and data will be consistent. Taxonomy Taxonomy is the practice of classification of things or concepts and the principles. The NoSQL taxonomy supports column store, document store, key-value stores, and graph databases. We will discuss the taxonomy in detail in later blog posts. Here are few of the examples of the each of the No SQL Category. Column: Hbase, Cassandra, Accumulo Document: MongoDB, Couchbase, Raven Key-value : Dynamo, Riak, Azure, Redis, Cache, GT.m Graph: Neo4J, Allegro, Virtuoso, Bigdata As of now there are over 150 NoSQL Database and you can read everything about them in this single link. Tomorrow In tomorrow’s blog post we will discuss Buzz Word – Hadoop. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

SQL Developer Data Modeler: On Notes, Comments, and Comments in RDBMS

- by thatjeffsmith

Ah the beautiful data model. They say a picture is worth a 1,000 words. And then we have our diagrams, how many words are they worth? Our friends from the Human Relations sample schema So our models describe how the data ‘works’ – whether that be at a logical-business level, or a technical-physical level. Developers like to say that their code is self-documenting. These would be very lazy or very bad (or both) developers. Models are the same way, you should document your models with comments and notes! I have 3 basic options: Comments Comments in RDBMS Notes So what’s the difference? Comments You’re describing the entity/table or attribute/column. This information will NOT be published in the database. It will only be available to the model, and hence, folks with access to the model. Table Comments (in the design only!) Comments in RDBMS You’re doing the same thing as above, but your words will be stored IN the data dictionary of the database. Oracle allows you to store comments on the table and column definitions. So your awesome documentation is going to be viewable to anyone with access to the database. RDBMS is an acronym for Relational Database Management System – of which Oracle is one of the first commercial examples If the DDL is produced and ran against a database, these comments WILL be stored in the data dictionary. Notes A place for you to add notes, maybe from a design meeting. Or maybe you’re using this as a to-do or requirements list. Basically it’s for anything that doesn’t literally describe the object at hand – that’s what the comments are for. I totally made these up. Now these are free text fields and you can put whatever you want here. Just make sure you put stuff here that’s worth reading. And it will live on…forever.

Read the article

doubleTwist is an iTunes Alternative that Supports Several Devices

- by Mysticgeek

There are a lot of iTunes users out there, but unfortunately you can’t use it with all of your portable devices. Today we take a look at doubleTwist, which allows you to sync your media with a multitude of portable devices and easily share it as well. Note: You can run doubleTwist on Windows or Mac, and here we take a look at the Windows version. Install & Setup doubleTwist Download and install doubleTwist using the defaults in the wizard… Installation takes several moments and you’ll see the progress while it finishes up. After installation is complete, sign up for an account if you don’t already have one. If you do have an account you can login right away. Enter in your username, email address, and password then click Sign Up. You’ll get an confirmation email and need to activate the account before you can sign in. Once you’re all signed up, launch doubleTwist and you’ll be ready to start using it. doubleTwist Music The default music store is Amazon MP3 store which might appeal to those of you who are tired of the iTunes music store. A lot of times the music is cheaper and available at higher bit rates. You can start searching for music in the Amazon Music Store and previewing songs. To purchase anything though you will need to sign into your Amazon account. Under Playlists it allows you to import your playlists from iTunes and Windows Media Player, which is a handy feature if you don’t want to set them up again. Of course you can play your songs through the music player on your desktop. Devices One of the coolest things about doubleTwist is that it supports a lot of different portable media devices including iPod, BlackBerry, Windows Mobile, Android, PSP, Smartphones, and much more. Unfortunately for Zune users…there isn’t any support for the Zune of Zune HD yet. Here we have a Creative Zen attached and can sync songs, pictures, and podcasts. An HTC-S620 Smartphone running Windows Mobile… Even a simple USB drive will be recognized and you can transfer your media to it as well. Podcasts Finding your favorite audio and video podcasts is easy with the search feature. You can easily manage and subscribe to podcasts in the subscriptions section. You can watch the video podcasts directly in doubleTwist. Sharing Media Also you can share digital media with your friends or add it to Flickr and YouTube. You can send any pictures, videos, or music in your library to other people by dragging it over. You can email users individually… Or access contacts from your Gmail and Yahoo accounts. There is a limit to how much you can send of video podcasts… only the first 10 minutes. The person you send it to will get a link in their email that points to your My Feed page on the doubleTwist site. There they can access the media you sent…in this example it’s a video podcast but you can share any media. Other Features Under My Profile you can change your avatar and personal information. In Preferences you can choose where media is stored, its startup actions, podcast subscriptions, and manage device syncing. Conclusion It’s still in beta stage so expect some bugs, but overall doubleTwist is a solid media player that is easy to use with a clean interface. It’s simple and doesn’t try to do too much so is fairly easy on system resources. The main annoyance is it tries to catalog all of your media out of the box. Which may be alright for some users with smaller media collections, but very irritating to advanced users with large collections. Also there is currently no support for the Zune, but according to their forums, it’s on the way. At the time of this writing it’s in public beta and can be downloaded for XP, Vista, Windows 7 (32 & 64 bit), and Mac OSX. If you’re looking for an iTunes alternative that works with several different portable devices, you might want to give DoubleTwist a try. Download DoubleTwist Public Beta See If Your Media Device is Supported by doubleTwist Similar Articles Productive Geek Tips MusicBee is a Fast and Powerful Music ManagerAvoid the Apple QuickTime Bloat with QT LiteBeginner Geek: Set Default Programs in Windows 7 and VistaBeginner Geeks: OpenOffice is a Free Cross Platform Alternative to MS OfficeManage Devices the Easy Way with Device Stage in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

Read the article

Adding UCM as a search source in Windows Explorer

- by kyle.hatlestad

A customer recently pointed out to me that Windows 7 supports federated search within Windows Explorer. This means you can perform searches to external sources such as Google, Flickr, YouTube, etc right from within Explorer. While we do have the Desktop Integration Suite which offers searching within Explorer, I thought it would be interesting to look into this method which would not require any client software to implement. Basically, federated searching hooks up in Windows Explorer through the OpenSearch protocol. A Search Connector Descriptor file is run and it installs the search provider. The file is a .osdx file which is an OpenSearch Description document. It describes the search provider you are hooking up to along with the URL for the query. If those results can come back as an RSS or ATOM feed, then you're all set. So the first step is to install the RSS Feeds component from the UCM Samples page on OTN. If you're on 11g, I've found the RSS Feeds works just fine on that version too. Next, you want to perform a Quick Search with a particular search term and then copy the RSS link address for that search result. Here is what an example URL might looks like: http://server:16200/cs/idcplg?IdcService=GET_SCS_FEED&feedName=search_results&QueryText=%28+%3cqsch%3eoracle%3c%2fqsch %3e+%29&SortField=dInDate&SortOrder=Desc&ResultCount=20&SearchQueryFormat= Universal&SearchProviders=server& Now you want to create a new text file and start out with this information: <?xml version="1.0" encoding="UTF-8"?><OpenSearchDescription xmlns:ms-ose="http://schemas.microsoft.com/opensearchext/2009/"> <ShortName></ShortName> <Description></Description> <Url type="application/rss+xml" template=""/> <Url type="text/html" template=""/> </OpenSearchDescription> Enter a ShortName and Description. The ShortName will be the value used when displaying the search provider in Explorer. In the template attribute for the first Url element, enter the URL copied previously. You will then need to convert the ampersand symbols to '&' to make them XML compliant. Finally, you'll want to switch out the search term with '{searchTerms}'. For the second Url element, you can do the same thing except you want to copy the UCM search results URL from the page of results. That URL will look something like: http://server:16200/cs/idcplg?IdcService=GET_SEARCH_RESULTS&SortField=dInDate&SortOrder=Desc&ResultCount=20&QueryText=%3Cqsch%3Eoracle%3C%2Fqsch%3E&listTemplateId= &ftx=1&SearchQueryFormat=Universal&TargetedQuickSearchSelection= &MiniSearchText=oracle Again, convert the ampersand symbols and replace the search term with '{searchTerms}'. When complete, save the file with the .osdx extension. The completed file should look like: <?xml version="1.0" encoding="UTF-8"?> <OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/" xmlns:ms-ose="http://schemas.microsoft.com/opensearchext/2009/"> <ShortName>Universal Content Management</ShortName> <Description>OpenSearch for UCM via Windows 7 Search Federation.</Description> <Url type="application/rss+xml" template="http://server:16200/cs/idcplg?IdcService=GET_SCS_FEED&feedName=search_results&QueryText=%28+%3Cqsch%3E{searchTerms}%3C%2fqsch%3E+%29&SortField=dInDate&SortOrder=Desc&ResultCount=200&SearchQueryFormat=Universal"/> <Url type="text/html" template="http://server:16200/cs/idcplg?IdcService=GET_SEARCH_RESULTS&SortField=dInDate&SortOrder=Desc&ResultCount=20&QueryText=%3Cqsch%3E{searchTerms}%3C%2Fqsch%3E&listTemplateId=&ftx=1&SearchQueryFormat=Universal&TargetedQuickSearchSelection=&MiniSearchText={searchTerms}"/> </OpenSearchDescription> After you save the file, simply double-click it to create the provider. It will ask if you want to add the search connector to Windows. Click Add and it will add it to the Searches folder in your user folder as well as your Favorites. Now just click on the search icon and in the upper right search box, enter your term. As you are typing, it begins executing searches and the results will come back in Explorer. Now when you double-click on an item, it will try and download the web viewable for viewing. You also have the ability to save the search, just as you would in UCM. And there is a link to Search On Website which will launch your browser and go directly to the search results page there. And with some tweaks to the RSS component, you can make the results a bit more interesting. It supports the Media RSS standard, so you can pass along the thumbnail of the documents in the results. To enable this, edit the rss_resources.htm file in the RSS Feeds component. In the std_rss_feed_begin resource include, add the namespace 'xmlns:media="http://search.yahoo.com/mrss/' to the rss definition: <rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:sy="http://purl.org/rss/1.0/modules/syndication/" xmlns:media="http://search.yahoo.com/mrss/"> Next, in the rss_channel_item_with_thumb include, below the closing image element, add this element: </images> <media:thumbnail url="<$if strIndexOf(thumbnailUrl, "@t") > 0 or strIndexOf(thumbnailUrl, "@g") > 0 or strIndexOf(thumbnailUrl, "@p") > 0$><$rssHttpHost$><$thumbnailUrl$><$elseif dGif$><$HttpWebRoot$>images/docgifs/<$dGif$><$endif$>" /> <description> This and lots of other tweaks can be done to the RSS component to help extend it for optimum use in Explorer. Hopefully this can get you started. *Note: This post also applies to Universal Records Management (URM).

Read the article

Preview and Purchase Ebooks with Kindle for PC

- by Matthew Guay

Want to look over a new book, or buy it immediately in ebook format? Here’s how you can preview and purchase most new books from your PC the easy way. Most new books, including almost all New York Times Bestsellers, are available in ebook format from Amazon’s Kindle store. The Kindle store also includes numerous free ebooks, including out-of-print classics and a surprising amount of recent books. With the free Kindle for PC reader, you can read any of these ebooks without having to purchase a Kindle device. Preview Ebooks Before you Purchase Sometimes, it can be hard to know if you want to purchase a new book without reading some of it first. With Kindle for PC, however, you can download a sample of any ebook available for free. The sample usually includes the table of contents, forward or introduction, and often part or all of the first chapter. To get an ebook sample, find the book you want in the Kindle store (link below). Now, under the Try it free box, select the correct computer or device to send the sample to, and click Send Sample now. Amazon will thank you for your order, even though this is only a free preview. Click the Go to Kindle for PC button to open Kindle and read your ebook preview. Or, if Kindle is already running, press the Refresh button in the top right corner to check for new ebooks and previews. Kindle will synchronize and download the previews you selected. The most recently downloaded items show up on the top left. All sample books have a red “Sample” bar on the bottom of their cover, and they also include links to Buy or view more info about it on it’s cover. Double-click your sample to start reading it. Your ebook sample will usually open at the introduction or beginning of the first chapter, but you can also view the index, cover, and more. When you reach the end of the sample book, you can click a link to buy the book or view more details about it. Strangely, both of these links currently take you to the ebook’s page on Amazon.com, but perhaps in the future the Buy link will directly let you purchase the book. Or, you can also click Buy Now on a sample book directly from your Kindle library. If you clicked one of these links, you will be returned to the ebook’s page on Amazon. Choose the PC or Kindle you want the book delivered to, and this time, select Buy Now with 1-Click. Add your payment info if you’re not already setup for 1-Click Shopping, and then you’ll be shown the same Thank you page as before. Refresh Kindle for PC, and your new ebook will automatically download. Strangely, the sample ebook is not automatically removed, so you can right-click on the sample and select Delete this Book. Additionally, your last-read page in the sample is not synced to the purchased book, so you may have to find your place again. Now, enjoy your full ebook! Download Free Books for Kindle The Kindle Store has an amazing amount of free ebooks. Some free books may only be free for a limited time as a promotion, while others, such as old classics, may always be free. Either which way, once you download it, you can keep it forever. When you find a free ebook you want, select the Kindle or PC you want to download it to and click “Buy now with 1-Click”. Notice that this book shows it’s price is $0.00, but the button still says Buy now. Rest assured, if the book’s price show up as $0.00, you will not be charged anything for downloading it. Your ebook will download as usual after your next refresh. Note that you can still download the sample first if you want, but since the book is free, just download the whole thing and delete it if you don’t want it. Redownload your Purchased or Free Books If you install Kindle on a new PC or delete a book from your library, you can always re-download it from your Amazon account. Browse to the Manage your Kindle page on Amazon (link below) sign in with your Amazon account, and scroll down to the list of your purchased content. Select the book you wish to download, then choose the Kindle or PC you want to download it to and press Go. Note: There is a “Delete this title” button right below this. If you press the Delete button, you will not ever be able to re-download it. Or, you can download the book directly from the Archived Items tab in Kindle on your other PC. And, if you have your Kindle content on multiple computers, your reading will be synced via Whispersync. You can start reading on your desktop, and then resume where you left off from your laptop. Conclusion With these tips and tricks, it is much easier to preview and purchase new books, find and download free ebooks, and re-download any you’ve deleted from your PC. Have fun filling up your digital library! Links Manage your Kindle account Similar Articles Productive Geek Tips Read Mobi eBooks on Kindle for PCRead Kindle Books On Your Computer with Kindle for PCHow to See Where a TinyUrl Is Really Linking ToEdit Microsoft Word 2007 Documents in Print PreviewWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides

Read the article

F# – Immutable List vs a Mutable Collection in Arrays

- by MarkPearl

Another day gone by looking into F#. Today I thought I would ramble on about lists and arrays in F#. Coming from a C# background I barely ever use arrays now days in my C# code – why you may ask – because I find lists generally handle most of the business scenario’s that I come across. So it has been an interesting experience with me keep bumping into Array’s & Lists in F# and I wondered why the frequency of coming across arrays was so much more in this language than in C#. Take for instance the code I stumbled across today. let rng = new Random() let shuffle (array : 'a array) = let n = array.Length for x in 1..n do let i = n-x let j = rng.Next(i+1) let tmp = array.[i] array.[i] <- array.[j] array.[j] <- tmp array Quite simply its purpose is to “shuffle” an array of items. So I thought, why does it have the “a’ array'” explicitly declared? What if I changed it to a list? Well… as I was about to find out there are some subtle differences between array’s & lists in F# that do not exist in C#. Namely, mutability. A list in F# is an ordered, immutable series of elements of the same type, while an array is a fixed-size zero based, mutable collection of consecutive data elements that are all of the same type. For me the keyword is immutable vs mutable collection. That’s why I could not simply swap the ‘a array with ‘a list in my function header because then later on in the code the syntax would not be valid where I “swap” item positions. i.e. array.[i] <- array.[j] would be invalid because if it was a list, it would be immutable and so couldn’t change by its very definition.. So where does that leave me? It’s to early days to say. I don’t know what the balance will be in future code – will I typically always use lists or arrays or even have a balance, but time will tell.

Read the article

Site Studio Mobile Example - WCM Reuse

- by john.brunswick

Mobile internet usage is growing by leaps and bounds and it is theorized that in the not-to-distant future it will eclipse traditional access via desktop browsers. Mary Meeker, a managing director at Morgan Stanley and head of their global technology research team, recently predicted that mobile usage will eclipse desktop usage within the next 5 years in an Events@Google series presentation. In order for organizations to reach their prospects, customers and business partners, they will need to make their content readily available on mobile devices. A few years ago it was fairly challenging to provide a special, separate, site to cater to mobile users using technologies like WML (Wireless Markup Language). Modern mobile browsers have rendered the need for this as irrelevant and now the focus has moved toward providing a browsing experience that works well on small screen sizes and is highly performant. What does all of this mean for Oracle UCM? Taking site content from an existing Site Studio site and targeting it for consumption for mobile devices is a very straightforward process that is aided by a number of native capabilities in the product. The example highlighted in this post takes advantage of dynamic conversion capabilities in Oracle UCM to enable site content to be created and updated via MS Office documents. These documents are then converted to a simple, clean HTML format for consumption in the desktop and mobile browsing experiences. To help better understand how this is possible the example below shows a fictional .COM and its mobile site counterpart that both leverage the same underlying content. The scenario is not complete or production ready, but highlights that a mobile experience may be best delivered by omitting portions of a site that would be present within the version served to desktop clients. If you have browsed CNet (news.com) on a mobile device it becomes quickly apparent that they are serving an optimized version for your mobile device. An iPhone style version can be accessed at http://iphone.cnet.com/. In order to do that they leveraged some work done for the iPhone iUi project developed by Joe Hewitt that provides mobile browsers an experience that is similar to what users may find in a native iPhone application. For our example parts of this framework are used (the CSS) and this approach provides a page that will degrade nicely over a wide range of mobile browsers, since it is comprised of lightweight HTML markup and CSS. The iPhone iUi framework also provides some nice JavaScript to enable animated transitions between pages, but for the widest range of mobile browser compatibility we will only incorporate the CSS and HTML DIV / UL based page markup in our example.

Search Results

Search found 12205 results on 489 pages for 'e business suite'.

Page 412/489 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419 | Next Page >

- by Tom Tonkin

- by Jeff

- by Matthew Guay

- by Melissa Centurio Lopes

- by Anand Akela

- by volker.eckardt(at)oracle.com

- by John Alexander

- by [email protected]

- by AnkurGupta

- by Trevor Bekolay

- by sqlworkshops

- by Mike.Hallett(at)Oracle-BI&EPM

- by Joe Mayo

- by jehan

- by rickramsey

- by DigitalGeekery

- by pinaldave

- by Kristin Rose

- by Pinal Dave

- by thatjeffsmith

- by Mysticgeek

- by kyle.hatlestad

- by Matthew Guay

- by MarkPearl

- by john.brunswick

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419 | Next Page >