adding - Page 414 - Developer IT

BizTalk 2009 - Custom Functoid Wizard

- by StuartBrierley

When creating BizTalk maps you may find that there are times when you need perform tasks that the standard functoids do not cover. At other times you may find yourself reapeating a pattern of standard functoids over and over again, adding visual complexity to an otherwise simple process. In these cases you may find it preferable to create your own custom functoids. In the past I have created a number of custom functoids from scratch, but recently I decided to try out the Custom Functoid Wizard for BizTalk 2009. After downloading and installing the wizard you should start Visual Studio and select to create a new BizTalk Server Functoid Project. Following the splash screen you will be presented with the General Properties screen, where you can set the classname, namespace, assembly name and strong name key file. The next screen is the first set of properties for the functoid. First of all is the fuctoid ID; this must be a value above 6000. You should also then set the name, tooltip and description of the functoid. The name will appear in the visual studio toolbox and the tooltip on hover over in the toolbox. The descrition will be shown when you configure the functoid inputs when using it in a map; as such it should provide a decent level of information to allow the functoid to be used. Next you must set the category, exception mesage, icon and implementation language. The category will affect the positioning of the functoid within the toolbox and also some of the behaviours of the functoid. We must then define the parameters and connections for our new functoid. Here you can define the names and types of your input parameters along with the minimum and maximum number of input connections. You will also need to define the types of connections accepted and the output type of the functoid. Finally you can click finish and your custom functoid project will be created. The results of this process can be seen in the solution explorer, where you will see that a project, functoid class file and a resource file have been created for you. If you open the class file you will see that the following code has been created for you: The "base" function sets all the properties that you previsouly detailed in the custom functoid wizard. public TestFunctoids():base() { int functoidID; // This has to be a number greater than 6000 functoidID = System.Convert.ToInt32(resmgr.GetString("FunctoidId")); this.ID = functoidID; // Set Resource strings, bitmaps SetupResourceAssembly(ResourceName, Assembly.GetExecutingAssembly()); SetName("FunctoidName"); SetTooltip("FunctoidToolTip"); SetDescription("FunctoidDescription"); SetBitmap("FunctoidBitmap"); // Minimum and maximum parameters that the functoid accepts this.SetMinParams(2); this.SetMaxParams(2); /// Function name that needs to be called when this Functoid is invoked. /// Put this in GAC. SetExternalFunctionName(GetType().Assembly.FullName, "MyCompany.BizTalk.Functoids.TestFuntoids.TestFunctoids", "Execute"); // Category for this functoid. this.Category = FunctoidCategory.String; // Input and output Connection type this.OutputConnectionType = ConnectionType.AllExceptRecord; AddInputConnectionType(ConnectionType.AllExceptRecord); } The "Execute" function provides a skeleton function that contains the code to be executed by your new functoid. The inputs and outputs should match those you defined in the Custom Functoid Wizard. public System.Int32 Execute(System.Int32 Cool) { ResourceManager resmgr = new ResourceManager(ResourceName, Assembly.GetExecutingAssembly()); try { // TODO: Implement Functoid Logic } catch (Exception e) { throw new Exception(resmgr.GetString("FunctoidException"), e); } } Opening the resource file you will see some of the various string values that you defined in the Custom Functoid Wizard - Name, Tooltip, Description and Exception. You can also select to look at the image resources. This will display the embedded icon image for the functoid. To change this right click the icon and select "Import from File". Once you have completed the skeleton code you can then look at trying out your functoid. To do this you will need to build the project, copy the compiled DLL to C:\Program Files\Microsoft BizTalk Server 2009\Developer Tools\Mapper Extensions and then refresh the toolbox in visual studio.

Read the article

Integrating a Progress Bar into a Wizard

- by Geertjan

Normally, when you create a wizard, as described here, and you have your own iterator, you'll have a class signature like this: public final class MyWizardWizardIterator implements WizardDescriptor.InstantiatingIterator<WizardDescriptor> { Let's now imagine that you've got some kind of long running process your wizard needs to perform. Maybe the wizard needs to connect to something, which could take some time. Start by adding a new dependency on the Progress API, which gives you the classes that access the NetBeans Platform's progress functionality. Now all we need to do is change the class signature very slightly: public final class MyWizardWizardIterator implements WizardDescriptor.ProgressInstantiatingIterator<WizardDescriptor> { Take a look at the part of the signature above that is highlighted. I.e., use WizardDescriptor.ProgressInstantiatingIterator instead of WizardDescriptor.InstantiatingIterator. Now you will need to implement a new instantiate method, one that receives a ProgressHandle. The other instantiate method, i.e., the one that already existed, should never be accessed anymore, and so you can add an assert to that effect: @Override public Set<?> instantiate() throws IOException { throw new AssertionError("instantiate(ProgressHandle) " //NOI18N + "should have been called"); //NOI18N } @Override public Set instantiate(ProgressHandle ph) throws IOException { return Collections.emptySet(); } OK. Let's now add some code to make our progress bar work: @Override public Set instantiate(ProgressHandle ph) throws IOException { ph.start(); ph.progress("Processing..."); try { //Simulate some long process: Thread.sleep(2500); } catch (InterruptedException ex) { Exceptions.printStackTrace(ex); } ph.finish(); return Collections.emptySet(); } And, maybe even more impressive, you can also do this: @Override public Set instantiate(ProgressHandle ph) throws IOException { ph.start(1000); ph.progress("Processing..."); try { //Simulate some long process: ph.progress("1/4 complete...", 250); Thread.sleep(2500); ph.progress("1/2 complete...", 500); Thread.sleep(5000); ph.progress("3/4 complete...", 750); Thread.sleep(7500); ph.progress("Complete...", 1000); Thread.sleep(1000); } catch (InterruptedException ex) { Exceptions.printStackTrace(ex); } ph.finish(); return Collections.emptySet(); } The screenshots above show you what you should see when the Finish button is clicked in each case.

Read the article

Right-Time Retail Part 2

- by David Dorf

This is part two of the three-part series. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Right-Time Integration Of course these real-time enabling technologies are only as good as the systems that utilize them, and it only takes one bottleneck to slow everyone else down. What good is an immediate stock-out notification if the supply chain can’t react until tomorrow? Since being formed in 2006, Oracle Retail has been not only adding more integrations between systems, but also modernizing integrations for appropriate speed. Notice I tossed in the word “appropriate.” Not everything needs to be real-time – again, we’re talking about Right-Time Retail. The speed of data capture, analysis, and execution must be synchronized or you’re wasting effort. Unfortunately, there isn’t an enterprise-wide dial that you can crank-up for your estate. You’ll need to improve things piecemeal, with people and processes as limiting factors while choosing the appropriate types of integrations. There are three integration styles we see in the retail industry. First is batch. I know, the word “batch” just sounds slow, but this pattern is less about velocity and more about volume. When there are large amounts of data to be moved, you’ll want to use batch processes. Our technology of choice here is Oracle Data Integrator (ODI), which provides a fast version of Extract-Transform-Load (ETL). Instead of the three-step process, the load and transform steps are combined to save time. ODI is a key technology for moving data into Retail Analytics where we can apply science. Performing analytics on each sale as it occurs doesn’t make any sense, so we batch up a statistically significant amount and submit all at once. The second style is fire-and-forget. For some types of data, we want the data to arrive ASAP but immediacy is not necessary. Speed is less important than guaranteed delivery, so we use message-oriented middleware available in both Weblogic and the Oracle database. For example, Point-of-Service transactions are queued for delivery to Central Office at corporate. If the network is offline, those transactions remain in the queue and will be delivered when the network returns. Transactions cannot be lost and they must be delivered in order. (Ever tried processing a return before the sale?) To enhance the standard queues, we offer the Retail Integration Bus (RIB) to help the management and monitoring of fire-and-forget messaging in the enterprise. The third style is request-response and is most commonly implemented as Web services. This is a synchronous message where the sender waits for a response. In this situation, the volume of data is small, guaranteed delivery is not necessary, but speed is very important. Examples include the website checking inventory, a price lookup, or processing a credit card authorization. The Oracle Service Bus (OSB) typically handles the routing of such messages, and we’ve enhanced its abilities with the Retail Service Backbone (RSB). To better understand these integration patterns and where they apply within the retail enterprise, we’re providing the Retail Reference Library (RRL) at no charge to Oracle Retail customers. The library is composed of a large number of industry business processes, including those necessary to support Commerce Anywhere, as well as detailed architectural diagrams. These diagrams allow implementers to understand the systems involved in integrations and the specific data payloads. Furthermore, with our upcoming release we’ll be providing a new tool called the Retail Integration Console (RIC) that allows IT to monitor and manage integrations from a single point. Using RIC, retailers can quickly discern where integration activity is occurring, volume statistics, average response times, and errors. The dashboards provide the ability to dive down into the architecture documentation to gather information all the way down to the specific payload. Retailers that want real-time integrations will also need real-time monitoring of those integrations to ensure service-level agreements are maintained. Part 3 looks at marketing.

Read the article

Soft lockup after upgrade - cannot install from live CD

- by nbm

I dual-boot MacIntel Core 2 duo. nVidia graphics. Ran upgrade from ubuntu 13.10 to 14.04 (64 bit). On restart ran into {numbers} Bug: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] Tried loading earlier kernel: same problem Tried re-installing ubuntu from a liveCD that has worked in the past: version 13.04. Same problem. Tried re-partitioning hard drive using Mac OS X disk utility and then installing ubuntu 14.04LTS from liveCD. Same problem. Not possible to verify liveCD disk (creates same "soft lockup" bug.) Tried installing from the liveCD with version 13.04 that I know works (that's how I got Ubuntu on this machine in the first place.) Same problem. I know this is not a hardware problem as OS X works just fine, I am using it right now on the same machine. I have been using various versions of Ubuntu for 2 years. Things I cannot do: Open a terminal Verify CD image Start ubuntu from CD (same soft lockup problem) This problem is similar to some other questions, none of which have been satisfactorily answered: Ubuntu 14.04 soft lockup on Vostro 3500 Cannot do fresh install of Ubuntu 13.04 while booting from DVD: "soft lockup" bug Live CD stalls when installing Ubuntu 13.10 UPDATE 6/11/14: Following some much-appreciated advice from bain (see below) I burned a 12.04LTS disk and started with kernel parameters: noapic, no1apic, acpi=off, nomodeset, elevator=deadline, and clocksource=jiffies. With all of these parameters I was able to load the 12.04LTS CD ("Try without installing"). It worked fine. However, as soon as I tried to install Ubuntu from the CD, my wired ethernet (eth0) connection would hang. There are already various askubuntu questions and bug reports about this problem, none of which had answers for me. (E.g., dhclient eth0 does nothing, none of the various reset commands does anything, manually setting IP &etc does nothing. I could reliably kill the ethernet connection by clicking "install ubuntu" every single time.) I could go ahead and install 12.04 without an internet connection, but the install would freeze after mostly completing (I tried several times.) There were some relevant error messages in the details of the install output script that, IIRC, had to do with searching for missing files and not being able to access eth0 (internet) to get them. To be honest I gave up at that point and I'm not sure I wrote those down. If I find some notes I will post them. At this point I no longer have Ubuntu on my system. I wiped the partitions and am using exclusively OS X. I am leaving this question in case it helps anyone else with similar problems. I love open source and I love Linux, and the next machine I get I will probably just build from Arch. At the moment I miss repositories and a lot of other things about Ubuntu, but the OS X terminal is 'nix, I can pretty much use all the open source apps I like, and while I am not a fan of the Apple software it gets the job done for me. Unlike Ubuntu, which can't even install. I realize this isn't necessarily a place for a soapbox speech, but when I first installed 12.04 several years ago there were already people in the community complaining that Canonical was going too "commercial". But I loved it. Several years later and all I've seen is Canonical adding more not-so-useful bells and whistles to Ubuntu while continually failing to fix basic problems on upgrades. With a dual-boot (and sometimes triple-boot) system it always took me some tweaking to get an upgrade to work, and to some extent that is okay. But at this point I feel like Canonical ought to just put a price tag on Ubuntu. All I see is more commercialism and advertising and product tie-ins, and ongoing problems do not get fixed. I am a big fan of open-source, not-for profit enterprise. I am also a big fan of for-profit enterprise, which certainly has its place and usefulness. I am not a fan of companies who pretend to be in favor of open source but really are just out to make a buck, and IMNSHO that is what Canonical has become. This is a great community and I wish you all the best, but my next install of Linux will not be Ubuntu.

Read the article

ADF Reusable Artefacts

- by Arda Eralp

Primary reusable ADF Business Component: Entity Objects (EOs) View Objects (VOs) Application Modules (AMs) Framework Extensions Classes Primary reusable ADF Controller: Bounded Task Flows (BTFs) Task Flow Templates Primary reusable ADF Faces: Page Templates Skins Declarative Components Utility Classes Certain components will often be used more than once. Whether the reuse happens within the same application, or across different applications, it is often advantageous to package these reusable components into a library that can be shared between different developers, across different teams, and even across departments within an organization. In the world of Java object-oriented programming, reusing classes and objects is just standard procedure. With the introduction of the model-view-controller (MVC) architecture, applications can be further modularized into separate model, view, and controller layers. By separating the data (model and business services layers) from the presentation (view and controller layers), you ensure that changes to any one layer do not affect the integrity of the other layers. You can change business logic without having to change the UI, or redesign the web pages or front end without having to recode domain logic. Oracle ADF and JDeveloper support the MVC design pattern. When you create an application in JDeveloper, you can choose many application templates that automatically set up data model and user interface projects. Because the different MVC layers are decoupled from each other, development can proceed on different projects in parallel and with a certain amount of independence. ADF Library further extends this modularity of design by providing a convenient and practical way to create, deploy, and reuse high-level components. When you first design your application, you design it with component reusability in mind. If you created components that can be reused, you can package them into JAR files and add them to a reusable component repository. If you need a component, you may look into the repository for those components and then add them into your project or application. For example, you can create an application module for a domain and package it to be used as the data model project in several different applications. Or, if your application will be consuming components, you may be able to load a page template component from a repository of ADF Library JARs to create common look and feel pages. Then you can put your page flow together by stringing together several task flow components pulled from the library. An ADF Library JAR contains ADF components and does not, and cannot, contain other JARs. It should not be confused with the JDeveloper library, Java EE library, or Oracle WebLogic shared library. Reusable Component Description Data Control Any data control can be packaged into an ADF Library JAR. Some of the data controls supported by Oracle ADF include application modules, Enterprise JavaBeans, web services, URL services, JavaBeans, and placeholder data controls. Application Module When you are using ADF Business Components and you generate an application module, an associated application module data control is also generated. When you package an application module data control, you also package up the ADF Business Components associated with that application module. The relevant entity objects, view objects, and associations will be a part of the ADF Library JAR and available for reuse. Business Components Business components are the entity objects, view objects, and associations used in the ADF Business Components data model project. You can package business components by themselves or together with an application module. Task Flows & Task Flow Templates Task flows can be packaged into an ADF Library JAR for reuse. If you drop a bounded task flow that uses page fragments, JDeveloper adds a region to the page and binds it to the dropped task flow. ADF bounded task flows built using pages can be dropped onto pages. The drop will create a link to call the bounded task flow. A task flow call activity and control flow will automatically be added to the task flow, with the view activity referencing the page. If there is more than one existing task flow with a view activity referencing the page, it will prompt you to select the one to automatically add a task flow call activity and control flow. If an ADF task flow template was created in the same project as the task flow, the ADF task flow template will be included in the ADF Library JAR and will be reusable. Page Templates You can package a page template and its artifacts into an ADF Library JAR. If the template uses image files and they are included in a directory within your project, these files will also be available for the template during reuse. Declarative Components You can create declarative components and package them for reuse. The tag libraries associated with the component will be included and loaded into the consuming project. You can also package up projects that have several different reusable components if you expect that more than one component will be consumed. For example, you can create a project that has both an application module and a bounded task flow. When this ADF Library JAR file is consumed, the application will have both the application module and the task flow available for use. You can package multiple components into one JAR file, or you can package a single component into a JAR file. Oracle ADF and JDeveloper give you the option and flexibility to create reusable components that best suit you and your organization. You create a reusable component by using JDeveloper to package and deploy the project that contains the components into a ADF Library JAR file. You use the components by adding that JAR to the consuming project. At design time, the JAR is added to the consuming project's class path and so is available for reuse. At runtime, the reused component runs from the JAR file by reference.

Read the article

Windows Phone 8 Announcement

- by Tim Murphy

As if the Surface announcement on Monday wasn’t exciting enough, today Microsoft announce that Windows Phone 8 will be coming this fall. That itself is great news, but the features coming were like confetti flying in all different directions. Given this speed I couldn’t capture every feature they covered. A summary of what I did capture is listed below starting with their eight main features. Common Core The first thing that they covered is that Windows Phone 8 will share a core OS with Windows 8. It will also run natively on multiple cores. They mentioned that they have run it on up to 64 cores to this point. The phones as you might expect will at least start as dual core. If you remember there were metrics saying that Windows Phone 7 performed operations faster on a single core than other platforms did with dual cores. The metrics they showed here indicate that Windows Phone 8 runs faster on comparable dual core hardware than other platforms. New Screen Resolutions Screen resolution has never been an issue for me, but it has been a criticism of Windows Phone 7 in the media. Windows Phone 8 will supports three screen resolutions: WVGA 800 x 480, WXGA 1280 x 768, and 720 1280x720. Hopefully this makes pixel counters a little happier. MicroSD Support This was one of my pet peeves when I got my Samsung Focus. With Windows Phone 8 the operating system will support adding MicroSD cards after initial setup. Of course this is dependent on the hardware company on implementing it, but I think we have seen that even feature phone manufacturers have not had a problem supporting this in the past. NFC NFC has been an anticipated feature for some time. What Microsoft showed today included the fact that they didn’t just want it to be for the phone. There is cross platform NFC functionality between Windows Phone 8 and Windows 8. The demos , while possibly a bit fanciful, showed would could be achieved even in a retail environment. We are getting closer and closer to a Minority Report world with these technologies. Wallet Windows Phone 8 isn’t the first platform to have a wallet concept. What they have done to differentiate themselves is to make it sot that it is not dependent on a SIM type chip like other platforms. They have also expanded the concept beyond just banks to other types of credits such as airline miles. Nokia Mapping People have been envious of the Lumia phones having the Nokia mapping software. Now all Windows Phone 8 devices will use NavTeq data and will have the capability to run in an offline fashion. This is a major step forward from the Bing “touch for the next turn” maps. IT Administration The lack of features for enterprise administration and deployment was a complaint even before the Windows Phone 7 was released. With the Windows Phone 8 release such features as Bitlocker and Secure boot will be baked into the OS. We will also have the ability to privately sign and distribute applications. Changing Start Screen Joe Belfiore made a big deal about this aspect of the new release. Users will have more color themes available to them and the live tiles will be highly customizable. You will have the ability to resize and organize the tiles in a more dynamic way. This allows for less important tiles or ones with less information to be made smaller. And There Is More So what other tidbits came out of the presentation? Later this summer the API for WP8 will be available. There will be developer events coming to a city near you. Another announcement of interest to developers is the ability to write applications at a native code level. This is a boon for game developers and those who need highly efficient applications. As a topper on the cake there was mention of in app payment. On the consumer side we also found out that all updates will be available over the air. Along with this came the fact that Microsoft will support all devices with updates for at least 18 month and you will be able to subscribe for early updates. Update coming for Windows Phone 7.5 customers to WP7.8. The main enhancement will be the new live tile features. The big bonus is that the update will bypass the carriers. I would assume though that you will be brought up to date with all previous patches that your carrier may not have released. There is so much more, but that is enough for one post. Needless to say, EXCITING! del.icio.us Tags: Windows Phone 8,WP8,Windows Phone 7,WP7,Announcements,Microsoft

Read the article

Proxied calls not working as expected

- by AndyH

I have been modifying an application to have a cleaner client/server split to allow for load splitting and resource sharing etc. Everything is written to an interface so it was easy to add a remoting layer to the interface using a proxy. Everything worked fine. The next phase was to add a caching layer to the interface and again this worked fine and speed was improved but not as much as I would have expected. On inspection it became very clear what was going on. I feel sure that this behavior has been seen many times before and there is probably a design pattern to solve the problem but it eludes me and I'm not even sure how to describe it. It is easiest explained with an example. Let's imagine the interface is interface IMyCode { List<IThing> getLots( List<String> ); IThing getOne( String id ); } The getLots() method calls getOne() and fills up the list before returning. The interface is implemented at the client which is proxied to a remoting client which then calls the remoting server which in turn calls the implementation at the server. At the client and the server layers there is also a cache. So we have :- Client interface | Client cache | Remote client | Remote server | Server cache | Server interface If we call getOne("A") at the client interface, the call is passed to the client cache which faults. This then calls the remote client which passes the call to the remote server. This then calls the server cache which also faults and so the call is eventually passed to the server interface which actually gets the IThing. In turn the server cache is filled and finally the client cache also. If getOne("A") is again called at the client interface the client cache has the data and it gets returned immediately. If a second client called getOne("B") it would fill the server cache with "B" as well as it's own client cache. Then, when the first client calls getOne("B") the client cache faults but the server cache has the data. This is all as one would expect and works well. Now lets call getLots( [ "C", "D" ] ). This works as you would expect by calling getOne() twice but there is a subtlety here. The call to getLots() cannot directly make use of the cache. Therefore the sequence is to call the client interface which in turn calls the remote client, then the remote server and eventually the server interface. This then calls getOne() to fill the list before returning. The problem is that the getOne() calls are being satisfied at the server when ideally they should be satisfied at the client. If you imagine that the client/server link is really slow then it becomes clear why the client call is more efficient than the server call once the client cache has the data. This example is contrived to illustrate the point. The more general problem is that you cannot just keep adding proxied layers to an interface and expect it to work as you would imagine. As soon as the call goes 'through' the proxy any subsequent calls are on the proxied side rather than 'self' side. Have I failed to learn or not learned something correctly? All this is implemented in Java and I haven't used EJBs. It seems that the example may be confusing. The problem is nothing to do with cache efficiencies. It is more to do with an illusion created by the use of proxies or AOP techniques in general. When you have an object whose class implements an interface there is an assumption that a call on that object might make further calls on that same object. For example, public String getInternalString() { return InetAddress.getLocalHost().toString(); } public String getString() { return getInternalString(); } If you get an object and call getString() the result depends where the code is running. If you add a remoting proxy to the class then the result could be different for calls to getString() and getInternalString() on the same object. This is because the initial call gets 'deproxied' before the actual method is called. I find this not only confusing but I wonder how I can control this behavior especially as the use of the proxy may be by a third party. The concept is fine but the practice is certainly not what I expected. Have I missed the point somewhere?

Read the article

How You Helped Shape Java EE 7...

- by reza_rahman

I have been working with the JCP in various roles since EJB 3/Java EE 5 (much of it on my own time), eventually culminating in my decision to accept my current role at Oracle (despite it's inevitable set of unique challenges, a role I find by and large positive and fulfilling). During these years, it has always been clear to me that pretty much everyone in the JCP genuinely cares about openness, feedback and developer participation. Perhaps the most visible sign to date of this high regard for grassroots level input is a survey on Java EE 7 gathered a few months ago. The survey was designed to get open feedback on a number of critical issues central to the Java EE 7 umbrella specification including what APIs to include in the standard. When we started the survey, I don't think anyone was certain what the level of participation from developers would really be. I also think everyone was pleasantly surprised that a large number of developers (around 1100) took the time out to vote on these very important issues that could impact their own professional life. And it wasn't just a matter of the quantity of responses. I was particularly impressed with the quality of the comments made through the survey (some of which I'll try to do justice to below). With Java EE 7 under our belt and the horizons for Java EE 8 emerging, this is a good time to thank everyone that took the survey once again for their thoughts and let you know what the impact of your voice actually was. As an aside, you may be happy to know that we are working hard behind the scenes to try to put together a similar survey to help kick off the agenda for Java EE 8 (although this is by no means certain). I'll break things down by the questions asked in the survey, the responses and the resulting change in the specification. APIs to Add to Java EE 7 Full/Web Profile The first question in the survey asked which of four new candidate APIs (WebSocket, JSON-P, JBatch and JCache) should be added to the Java EE 7 Full and Web profile respectively. Developers by and large wanted all the new APIs added to the full platform. The comments expressed particularly strong support for WebSocket and JCache. Others expressed dissatisfaction over the lack of a JSON binding (as opposed to JSON processing) API. WebSocket, JSON-P and JBatch are now part of Java EE 7. In addition, the long-awaited Java EE Concurrency Utilities API was also included in the Full Profile. Unfortunately, JCache was not finalized in time for Java EE 7 and the decision was made not to hold up the Java EE release any longer. JCache continues to move forward strongly and will very likely be included in Java EE 8 (it will be available much sooner than Java EE 8 to boot). An emergent standard for JSON-B is also a strong possibility for Java EE 8. When it came to the Web Profile, developers were supportive of adding WebSocket and JSON-P, but not JBatch and JCache. Both WebSocket and JSON-P are now part of the Web Profile, now also including the already popular JAX-RS API. Enabling CDI by Default The second question asked whether CDI should be enabled in Java EE by default. The overwhelming majority of developers supported the default enablement of CDI. In addition, developers expressed a desire for better CDI/Java EE alignment (with regards to EJB and JSF in particular). Some developers expressed legitimate concerns over the performance implications of enabling CDI globally as well as the potential conflict with other JSR 330 implementations like Spring and Guice. CDI is enabled by default in Java EE 7. Respecting the legitimate concerns, CDI 1.1 was very careful to add additional controls around component scanning. While a lot of work was done in Java EE 6 and Java EE 7 around CDI alignment, further alignment is under serious consideration for Java EE 8. Consistent Usage of @Inject The third question was around using CDI/JSR 330 @Inject consistently vs. allowing JSRs to create their own injection annotations (e.g. @BatchContext). A majority of developers wanted consistent usage of @Inject. The comments again reflected a strong desire for CDI/Java EE alignment. A lot of emphasis in Java EE 7 was put into using @Inject consistently. For example, the JBatch specification is focused on using @Inject wherever possible. JAX-RS remains an exception with it's existing custom injection annotations. However, the JAX-RS specification leads understand the importance of eventual convergence, hopefully in Java EE 8. Expanding the Use of @Stereotype The fourth question was about expanding CDI @Stereotype to cover annotations across Java EE beyond just CDI. A solid majority of developers supported the idea of making @Stereotype more universal in Java EE. The comments maintained the general theme of strong support for CDI/Java EE alignment Unfortunately, there was not enough time and resources in Java EE 7 to implement this fairly pervasive feature. However, it remains a serious consideration for Java EE 8. Expanding Interceptor Use The final set of questions was about expanding interceptors further across Java EE. Developers strongly supported the concept. Along with injection, interceptors are now supported across all Java EE 7 components including Servlets, Filters, Listeners, JAX-WS endpoints, JAX-RS resources, WebSocket endpoints and so on. I hope you are encouraged by how your input to the survey helped shape Java EE 7 and continues to shape Java EE 8. Participating in these sorts of surveys is of course just one way of contributing to Java EE. Another great way to stay involved is the Adopt-A-JSR Program. A large number of developers are already participating through their local JUGs. You could of course become a Java EE JSR expert group member or observer. You should stay tuned to The Aquarium for the progress of Java EE 8 JSRs if that's something you want to look into...

Read the article

Why do I get an exception when playing multiple sound instances?

- by Boreal

Right now, I'm adding a rudimentary sound engine to my game. So far, I am able to load in a WAV file and play it once, then free up the memory when I close the game. However, the game crashes with a nice ArgumentOutOfBoundsException when I try to play another sound instance. Specified argument was out of the range of valid values. Parameter name: readLength I'm following this tutorial pretty much exactly, but I still keep getting the aforementioned error. Here's my sound-related code. /// <summary> /// Manages all sound instances. /// </summary> public static class Audio { static XAudio2 device; static MasteringVoice master; static List<SoundInstance> instances; /// <summary> /// The XAudio2 device. /// </summary> internal static XAudio2 Device { get { return device; } } /// <summary> /// Initializes the audio device and master track. /// </summary> internal static void Initialize() { device = new XAudio2(); master = new MasteringVoice(device); instances = new List<SoundInstance>(); } /// <summary> /// Releases all XA2 resources. /// </summary> internal static void Shutdown() { foreach(SoundInstance i in instances) i.Dispose(); master.Dispose(); device.Dispose(); } /// <summary> /// Registers a sound instance with the system. /// </summary> /// <param name="instance">Sound instance</param> internal static void AddInstance(SoundInstance instance) { instances.Add(instance); } /// <summary> /// Disposes any sound instance that has stopped playing. /// </summary> internal static void Update() { List<SoundInstance> temp = new List<SoundInstance>(instances); foreach(SoundInstance i in temp) if(!i.Playing) { i.Dispose(); instances.Remove(i); } } } /// <summary> /// Loads sounds from various files. /// </summary> internal class SoundLoader { /// <summary> /// Loads a .wav sound file. /// </summary> /// <param name="format">The decoded format will be sent here</param> /// <param name="buffer">The data will be sent here</param> /// <param name="soundName">The path to the WAV file</param> internal static void LoadWAV(out WaveFormat format, out AudioBuffer buffer, string soundName) { WaveStream wave = new WaveStream(soundName); format = wave.Format; buffer = new AudioBuffer(); buffer.AudioData = wave; buffer.AudioBytes = (int)wave.Length; buffer.Flags = BufferFlags.EndOfStream; } } /// <summary> /// Manages the data for a single sound. /// </summary> public class Sound : IAsset { WaveFormat format; AudioBuffer buffer; /// <summary> /// Loads a sound from a file. /// </summary> /// <param name="soundName">The path to the sound file</param> /// <returns>Whether the sound loaded successfully</returns> public bool Load(string soundName) { if(soundName.EndsWith(".wav")) SoundLoader.LoadWAV(out format, out buffer, soundName); else return false; return true; } /// <summary> /// Plays the sound. /// </summary> public void Play() { Audio.AddInstance(new SoundInstance(format, buffer)); } /// <summary> /// Unloads the sound from memory. /// </summary> public void Unload() { buffer.Dispose(); } } /// <summary> /// Manages a single sound instance. /// </summary> public class SoundInstance { SourceVoice source; bool playing; /// <summary> /// Whether the sound is currently playing. /// </summary> public bool Playing { get { return playing; } } /// <summary> /// Starts a new instance of a sound. /// </summary> /// <param name="format">Format of the sound</param> /// <param name="buffer">Buffer holding sound data</param> internal SoundInstance(WaveFormat format, AudioBuffer buffer) { source = new SourceVoice(Audio.Device, format); source.BufferEnd += (s, e) => playing = false; source.Start(); source.SubmitSourceBuffer(buffer); // THIS IS WHERE THE EXCEPTION IS THROWN playing = true; } /// <summary> /// Releases memory used by the instance. /// </summary> internal void Dispose() { source.Dispose(); } } The exception occurs on line 156 when I am playing the sound: source.SubmitSourceBuffer(buffer);

Read the article

Tip #19 Module Private Visibility in OSGi

- by ByronNevins

I hate public and protected methods and classes. It requires so much work to change them in a huge project like GlassFish. Not to mention that you may well have to support those APIs forever. They are highly overused in GlassFish. In fact I'd bet that > 95% of classes are marked as public for no good reason. It's just (bad) habit is my guess. private and default visibility (I call it package-private) is easier to maintain. It is much much easier to change such classes and methods around. If you have ANY public method or public class in GlassFish you'll need to grep through a tremendous amount of source code to find all callers. But even that won't be theoretically reliable. What if a caller is using reflection to access public methods? You may never find such usages. If you have package private methods, it's easy. Simply grep through all the code in that one package. As long as that package compiles ok you're all set. There can' be any compile errors anywhere else. It's a waste of time to even look around or build the "outside" world. So you may be thinking: "Aha! I'll just make my module have one giant package with all the java files. Then I can use the default visibility and maintenance will be much easier. But there's a problem. You are wasting a very nice feature of java -- organizing code into separate packages. It also makes the code much more encapsulated. Unfortunately to share code between the packages you have no choice but to declare public visibility. What happens in practice is that a module ends up having tons of public classes and methods that are used exclusively inside the module. Which finally brings me to the point of this blog: If Only There Was A Module-Private Visibility Available Well, surprise! There is such a mechanism. If your project is running under OSGi that is. Like GlassFish does! With this mechanism you can easily add another level of visibility by telling OSGi exactly which public you want to be exposed outside of the module. You get the best of both worlds: Better encapsulation of your code so that maintenance is easier and productivity is increased. Usage of public visibility inside the module so that you can encapsulate intra-module better with packages. How I do this in GlassFish: Carefully plan out at least one package that will contain "true" publics. This is the package that will be exported by OSGi. I recommend just one package. Here is how to tell OSGi to use it in GlassFish -- edit osgi.bundle like so:-exportcontents: org.glassfish.mymodule.truepublics; version=${project.osgi.version} Now all publics declared in any other packages will be visible module-wide but not outside the module. There is one caveat: Accessing "module-private" items outside of the module is controlled at run-time, not compile-time. The compiler has no clue that a public in a dependent module isn't really public. it will happily compile it. At runtime you will definitely see fireworks. The good news is that you don't have to wait for the code path that tries to use the "module-private" items to fire. OSGi will complain loudly when that module gets loaded. OSGi will refuse to load it. You will see an error like this: remote failure: Error while loading FOO: Exception while adding the new configuration : Error occurred during deployment: Exception while loading the app : org.osgi.framework.BundleException: Unresolved constraint in bundle com.oracle.glassfish.miscreant.code [115]: Unable to resolve 115.0: missing requirement [115.0] osgi.wiring.package; (osgi.wiring.package=org.glassfish.mymodule.unexported). Please see server.log for more details. That is if you accidentally change code in module B to use a public that is really a "module-private" in module A, then you will see the error immediately when you try to test whatever you were changing in module B.

Read the article

Styling ASP.NET MVC Error Messages

- by MightyZot

Originally posted on: http://geekswithblogs.net/MightyZot/archive/2013/11/11/styling-asp.net-mvc-error-messages.aspxOff the cuff, it may look like you’re stuck with the presentation of your error messages (model errors) in ASP.NET MVC. That’s not the case, though. You actually have quite a number of options with regard to styling those boogers. Like many of the helpers in MVC, the Html.ValidationMessageFor helper has multiple prototypes. One of those prototypes lets you pass a dictionary, or anonymous object, representing attribute values for the resulting markup. @Html.ValidationMessageFor( m => Model.Whatever, null, new { @class = “my-error” }) By passing the htmlAttributes parameter, which is the last parameter in the call to the prototype of Html.ValidationMessageFor shown above, I can style the resulting markup by associating styles to the my-error css class. When you run your MVC project and view the source, you’ll notice that MVC adds the class field-validation-valid or field-validation-error to a span created by the helper. You could actually just style those classes instead of adding your own…it’s really up to you. Now, what if you wanted to move that error message around? Maybe you want to put that error message in a box or a callout. How do you do that? When I first started using MVC, it didn’t occur to me that the Html.ValidationMessageFor helper just spits out a little bit of markup. I wanted to put the error messages in boxes with white backgrounds, our site originally had a black background, and show a little nib on the side to make them look like callouts or conversation bubbles. Not realizing how much freedom there is in the styling and markup, and after reading someone else’s post, I created my own version of the ValidationMessageFor helper that took out the span and replaced it with divs. I styled the divs to produce the effect of a popup box and had a lot of trouble with sizing and such. That’s a really silly and unnecessary way to solve this problem. If you want to move your error messages around, all you have to do is move the helper. MVC doesn’t appear to care where you put it, which makes total sense when you think about it. Html.ValidationMessageFor is just spitting out a little markup using a little bit of reflection on the name you’re passing it. All you’ve got to do to style it the way you want it is to put it in whatever markup you desire. Take a look at this, for example… <div class=”my-anchor”>@Html.ValidationMessageFor( m => Model.Whatever )</div> @Html.TextBoxFor(m => Model.Whatever) Now, given that bit of HTML, consider the following CSS… <style> .my-anchor { position:relative; } .field-validation-error { background-color:white; border-radius:4px; border: solid 1px #333; display: block; position: absolute; top:0; right:0; left:0; text-align:right; } </style> The my-anchor class establishes an anchor for the absolutely positioned error message. Now you can move the error message wherever you want it relative to the anchor. Using css3, there are some other tricks. For example, you can use the :not(:empty) selector to select the span and apply styles based upon whether or not the span has text in it. Keep it simple, though. Moving your elements around using absolute positioning may cause you issues on devices with screens smaller than your standard laptop or PC. While looking for something else recently, I saw someone asking how to style the output for Html.ValidationSummary. Html.ValidationSummery is the helper that will spit out a list of property errors, general model errors, or both. Html.ValidationSummary spits out fairly simple markup as well, so you can use the techniques described above with it also. The resulting markup is a <ul><li></li></ul> unordered list of error messages that carries the class validation-summary-errors In the forum question, the user was asking how to hide the error summary when there are no errors. Their errors were in a red box and they didn’t want to show an empty red box when there aren’t any errors. Obviously, you can use the css3 selectors to apply different styles to the list when it’s empty and when it’s not empty; however, that’s not support in all browsers. Well, it just so happens that the unordered list carries the style validation-summary-valid when the list is empty. While the div rendered by the Html.ValidationSummary helper renders a visible div, containing one invisible listitem, you can always just style the whole div with “display:none” when the validation-summary-valid class is applied and make it visible when the validation-summary-errors class is applied. Or, if you don’t like that solution, which I like quite well, you can also check the model state for errors with something like this… int errors = ViewData.ModelState.Sum(ms => ms.Value.Errors.Count); That’ll give you a count of the errors that have been added to ModelState. You can check that and conditionally include markup in your page if you want to. The choice is yours. Obviously, doing most everything you can with styles increases the flexibility of the presentation of your solution, so I recommend going that route when you can. That picture of the fat guy jumping has nothing to do with the article. That’s just a picture of me on the roof and I thought it was funny. Doesn’t every post need a picture?

Read the article

No More NCrunch For Me

- by Steve Wilkes

When I opened up Visual Studio this morning, I was greeted with this little popup: NCrunch is a Visual Studio add-in which runs your tests while you work so you know if and when you've broken anything, as well as providing coverage indicators in the IDE and coverage metrics on demand. It recently went commercial (which I thought was fair enough), and time is running out for the free version I've been using for the last couple of months. From my experiences using NCrunch I'm going to let it expire, and go about my business without it. Here's why. Before I start, let me say that I think NCrunch is a good product, which is to say it's had a positive impact on my programming. I've used it to help test-drive a library I'm making right from the start of the project, and especially at the beginning it was very useful to have it run all my tests whenever I made a change. The first problem is that while that was cool to start with, it’s recently become a bit of a chore. Problems Running Tests NCrunch has two 'engine modes' in which it can run tests for you - it can run all your tests when you make a change, or it can figure out which tests were impacted and only run those. Unfortunately, it became clear pretty early on that that second option (which is marked as 'experimental') wasn't really working for me, so I had to have it run everything. With a smallish number of tests and while I was adding new features that was great, but I've now got 445 tests (still not exactly loads) and am more in a 'clean and tidy' mode where I know that a change I'm making will probably only affect a particular subset of the tests. With that in mind it's a bit of a drag sitting there after I make a change and having to wait for NCrunch to run everything. I could disable it and manually run the tests I know are impacted, but then what's the point of having NCrunch? If the 'impacted only' engine mode worked well this problem would go away, but that's not what I found. Secondly, what's wrong with this picture? I've got 445 tests, and NCrunch has queued 455 tests to run. So it's queued duplicate tests - in this quickly-screenshotted case 10, but I've seen the total queue get up over 600. If I'm already itchy waiting for it to run all my tests against a change I know only affects a few, I'm even itchier waiting for it to run a lot of them twice. Problems With Code Coverage NCrunch marks each line of code with a dot to say if it's covered by tests - a black dot says the line isn't covered, a red dot says it's covered but at least one of the covering tests is failing, and a green dot means all the covering tests pass. It also calculates coverage statistics for you. Unfortunately, there's a couple of flaws in the coverage. Firstly, it doesn't support ExcludeFromCodeCoverage attributes. This feature has been requested and I expect will be included in a later release, but right now it doesn't. So this: ...is counted as a non-covered line, and drags your coverage statistics down. Hmph. As well as that, coverage of certain types of code is missed. This: ...is definitely covered. I am 100% absolutely certain it is, by several tests. NCrunch doesn't pick it up, down go my coverage statistics. I've had NCrunch find genuinely uncovered code which I've been able to remove, and that's great, but what's the coverage percentage on this project? Umm... I don't know. Conclusion None of these are major, tool-crippling problems, and I expect NCrunch to get much better in future releases. The current version has some great features, like this: ...that's a line of code with a failing test covering it, and NCrunch can run that failing test and take me to that line exquisitely easily. That's awesome! I'd happily pay for a tool that can do that. But here's the thing: NCrunch (currently) costs $159 (about £100) for a personal licence and $289 (about £180) for a commercial one. I'm not sure which one I'd need as my project is a personal one which I'm intending to open-source, but I'm a professional, self-employed developer, but in any case - that seems like a lot of money for an imperfect tool. If it did everything it's advertised to do more or less perfectly I'd consider it, but it doesn't. So no more NCrunch for me.

Read the article

Is it feasible and useful to auto-generate some code of unit tests?

- by skiwi

Earlier today I have come up with an idea, based upon a particular real use case, which I would want to have checked for feasability and usefulness. This question will feature a fair chunk of Java code, but can be applied to all languages running inside a VM, and maybe even outside. While there is real code, it uses nothing language-specific, so please read it mostly as pseudo code. The idea Make unit testing less cumbersome by adding in some ways to autogenerate code based on human interaction with the codebase. I understand this goes against the principle of TDD, but I don't think anyone ever proved that doing TDD is better over first creating code and then immediatly therafter the tests. This may even be adapted to be fit into TDD, but that is not my current goal. To show how it is intended to be used, I'll copy one of my classes here, for which I need to make unit tests. public class PutMonsterOnFieldAction implements PlayerAction { private final int handCardIndex; private final int fieldMonsterIndex; public PutMonsterOnFieldAction(final int handCardIndex, final int fieldMonsterIndex) { this.handCardIndex = Arguments.requirePositiveOrZero(handCardIndex, "handCardIndex"); this.fieldMonsterIndex = Arguments.requirePositiveOrZero(fieldMonsterIndex, "fieldCardIndex"); } @Override public boolean isActionAllowed(final Player player) { Objects.requireNonNull(player, "player"); Hand hand = player.getHand(); Field field = player.getField(); if (handCardIndex >= hand.getCapacity()) { return false; } if (fieldMonsterIndex >= field.getMonsterCapacity()) { return false; } if (field.hasMonster(fieldMonsterIndex)) { return false; } if (!(hand.get(handCardIndex) instanceof MonsterCard)) { return false; } return true; } @Override public void performAction(final Player player) { Objects.requireNonNull(player); if (!isActionAllowed(player)) { throw new PlayerActionNotAllowedException(); } Hand hand = player.getHand(); Field field = player.getField(); field.setMonster(fieldMonsterIndex, (MonsterCard)hand.play(handCardIndex)); } } We can observe the need for the following tests: Constructor test with valid input Constructor test with invalid inputs isActionAllowed test with valid input isActionAllowed test with invalid inputs performAction test with valid input performAction test with invalid inputs My idea mainly focuses on the isActionAllowed test with invalid inputs. Writing these tests is not fun, you need to ensure a number of conditions and you check whether it really returns false, this can be extended to performAction, where an exception needs to be thrown in that case. The goal of my idea is to generate those tests, by indicating (through GUI of IDE hopefully) that you want to generate tests based on a specific branch. The implementation by example User clicks on "Generate code for branch if (handCardIndex >= hand.getCapacity())". Now the tool needs to find a case where that holds. (I haven't added the relevant code as that may clutter the post ultimately) To invalidate the branch, the tool needs to find a handCardIndex and hand.getCapacity() such that the condition >= holds. It needs to construct a Player with a Hand that has a capacity of at least 1. It notices that the capacity private int of Hand needs to be at least 1. It searches for ways to set it to 1. Fortunately it finds a constructor that takes the capacity as an argument. It uses 1 for this. Some more work needs to be done to succesfully construct a Player instance, involving the creation of objects that have constraints that can be seen by inspecting the source code. It has found the hand with the least capacity possible and is able to construct it. Now to invalidate the test it will need to set handCardIndex = 1. It constructs the test and asserts it to be false (the returned value of the branch) What does the tool need to work? In order to function properly, it will need the ability to scan through all source code (including JDK code) to figure out all constraints. Optionally this could be done through the javadoc, but that is not always used to indicate all constraints. It could also do some trial and error, but it pretty much stops if you cannot attach source code to compiled classes. Then it needs some basic knowledge of what the primitive types are, including arrays. And it needs to be able to construct some form of "modification trees". The tool knows that it needs to change a certain variable to a different value in order to get the correct testcase. Hence it will need to list all possible ways to change it, without using reflection obviously. What this tool will not replace is the need to create tailored unit tests that tests all kinds of conditions when a certain method actually works. It is purely to be used to test methods when they invalidate constraints. My questions: Is creating such a tool feasible? Would it ever work, or are there some obvious problems? Would such a tool be useful? Is it even useful to automatically generate these testcases at all? Could it be extended to do even more useful things? Does, by chance, such a project already exist and would I be reinventing the wheel? If not proven useful, but still possible to make such thing, I will still consider it for fun. If it's considered useful, then I might make an open source project for it depending on the time. For people searching more background information about the used Player and Hand classes in my example, please refer to this repository. At the time of writing the PutMonsterOnFieldAction has not been uploaded to the repo yet, but this will be done once I'm done with the unit tests.

Read the article

Solaris 11.1 changes building of code past the point of __NORETURN

- by alanc

While Solaris 11.1 was under development, we started seeing some errors in the builds of the upstream X.Org git master sources, such as: "Display.c", line 65: Function has no return statement : x_io_error_handler "hostx.c", line 341: Function has no return statement : x_io_error_handler from functions that were defined to match a specific callback definition that declared them as returning an int if they did return, but these were calling exit() instead of returning so hadn't listed a return value. These had been generating warnings for years which we'd been ignoring, but X.Org has made enough progress in cleaning up code for compiler warnings and static analysis issues lately, that the community turned up the default error levels, including the gcc flag -Werror=return-type and the equivalent Solaris Studio cc flags -v -errwarn=E_FUNC_HAS_NO_RETURN_STMT, so now these became errors that stopped the build. Yet on Solaris, gcc built this code fine, while Studio errored out. Investigation showed this was due to the Solaris headers, which during Solaris 10 development added a number of annotations to the headers when gcc was being used for the amd64 kernel bringup before the Studio amd64 port was ready. Since Studio did not support the inline form of these annotations at the time, but instead used #pragma for them, the definitions were only present for gcc. To resolve this, I fixed both sides of the problem, so that it would work for building new X.Org sources on older Solaris releases or with older Studio compilers, as well as fixing the general problem before it broke more software building on Solaris. To the X.Org sources, I added the traditional Studio #pragma does_not_return to recognize that functions like exit() don't ever return, in patches such as this Xserver patch. Adding a dummy return statement was ruled out as that introduced unreachable code errors from compilers and analyzers that correctly realized you couldn't reach that code after a return statement. And on the Solaris 11.1 side, I updated the annotation definitions in <sys/ccompile.h> to enable for Studio 12.0 and later compilers the annotations already existing in a number of system headers for functions like exit() and abort(). If you look in that file you'll see the annotations we currently use, though the forms there haven't gone through review to become a Committed interface, so may change in the future. Actually getting this integrated into Solaris though took a bit more work than just editing one header file. Our ELF binary build comparison tool, wsdiff, actually showed a large number of differences in the resulting binaries due to the compiler using this information for branch prediction, code path analysis, and other possible optimizations, so after comparing enough of the disassembly output to be comfortable with the changes, we also made sure to get this in early enough in the release cycle so that it would get plenty of test exposure before the release. It also required updating quite a bit of code to avoid introducing new lint or compiler warnings or errors, and people building applications on top of Solaris 11.1 and later may need to make similar changes if they want to keep their build logs similarly clean. Previously, if you had a function that was declared with a non-void return type, lint and cc would warn if you didn't return a value, even if you called a function like exit() or panic() that ended execution. For instance: #include <stdlib.h> int callback(int status) { if (status == 0) return status; exit(status); } would previously require a never executed return 0; after the exit() to avoid lint warning "function falls off bottom without returning value". Now the compiler & lint will both issue "statement not reached" warnings for a return 0; after the final exit(), allowing (or in some cases, requiring) it to be removed. However, if there is no return statement anywhere in the function, lint will warn that you've declared a function returning a value that never does so, suggesting you can declare it as void. Unfortunately, if your function signature is required to match a certain form, such as in a callback, you not be able to do so, and will need to add a /* LINTED */ to the end of the function. If you need your code to build on both a newer and an older release, then you will either need to #ifdef these unreachable statements, or, to keep your sources common across releases, add to your sources the corresponding #pragma recognized by both current and older compiler versions, such as: #pragma does_not_return(exit) #pragma does_not_return(panic) Hopefully this little extra work is paid for by the compilers & code analyzers being able to better understand your code paths, giving you better optimizations and more accurate errors & warning messages.

Read the article

Determining the angle to fire a shot when target and shooter moves, and bullet moves with shooter velocity added in

- by Azaral

I saw this question: Predicting enemy position in order to have an object lead its target and followed the link in the answer to stack overflow. In the stack overflow page I used the 2nd answer, the one that is a large mathematical derivation. My situation is a little different though. My first question though is will the answer provided in the stack overflow page even work to begin with, assuming the original circumstances of moving target and stationary shooter. My situation is a little different than that situation. My target moves, the shooter moves, and the bullets from the shooter start off with the velocities in x and y added to the bullets' x and y velocities. If you are sliding to the right, the bullets will remain in front of you as you move so as long as your velocity remains constant. What I'm trying to do is to get the enemy to be able to determine where they need to shoot in order to hit the player. Unless the player and enemy is stationary, the velocity from the ship adding to the velocity of the bullets will cause a miss. I'd rather like to prevent that. I used the formula in the stack overflow answer and did what I thought were the appropriate adjustments. I've been banging at this for the last four hours and I just can't make it click. It is probably something really simple and boneheaded that I am missing (that seems to be a lot of my problems lately). Here is the solution presented from the stack overflow answer: It boils down to solving a quadratic equation of the form: a * sqr(x) + b * x + c == 0 Note that by sqr I mean square, as opposed to square root. Use the following values: a := sqr(target.velocityX) + sqr(target.velocityY) - sqr(projectile_speed) b := 2 * (target.velocityX * (target.startX - cannon.X) + target.velocityY * (target.startY - cannon.Y)) c := sqr(target.startX - cannon.X) + sqr(target.startY - cannon.Y) Now we can look at the discriminant to determine if we have a possible solution. disc := sqr(b) - 4 * a * c If the discriminant is less than 0, forget about hitting your target -- your projectile can never get there in time. Otherwise, look at two candidate solutions: t1 := (-b + sqrt(disc)) / (2 * a) t2 := (-b - sqrt(disc)) / (2 * a) Note that if disc == 0 then t1 and t2 are equal. If there are no other considerations such as intervening obstacles, simply choose the smaller positive value. (Negative t values would require firing backward in time to use!) Substitute the chosen t value back into the target's position equations to get the coordinates of the leading point you should be aiming at: aim.X := t * target.velocityX + target.startX aim.Y := t * target.velocityY + target.startY Here is my code, after being corrected by Sam Hocevar (thank you again for your help!). It still doesn't work. For some reason it never enters the section of code inside the if(disc = 0) (obviously because it is always less than zero but...). However, if I plug the numbers from my game log on the enemy and player positions and velocities it outputs a valid firing solution. I have looked at the code side by side a couple of times now and I can't find any differences. There has got to be something simple I'm missing here. If someone else could look at this code and determine what is going on here I'd appreciate it. I know it's not going through that section because if it were, shouldShoot would become true and the enemy would be blasting away at the player. This section calls the function in question, CalculateShootHeading() if(shouldMove) { UseEngines(); } x += xVelocity; y += yVelocity; CalculateShootHeading(); if(shouldShoot) { ShootWeapons(); } UpdateWeapons(); This is CalculateShootHeading(). This is inside the enemy class so x and y are the enemy's x and y and the same with velocity. One output from my game log gives Player X = 2108, Player Y = -180.956, Player X velocity = 10.9949, Player Y Velocity = -6.26017, Enemy X = 1988.31, Enemy Y = -339.051, Enemy X velocity = 1.81666, Enemy Y velocity = -9.67762, 0 enemy projectiles. The output from the console tester is Bullet position = 2210.49, -239.313 and Player Position = 2210.49, -239.313. This doesn't make any sense. The only thing that could be different is the code or the input into my function in the game and I've checked that and I don't think that it is wrong as it's updated before this and never changed. float const bulletSpeed = 30.f; float const dx = playerX - x; float const dy = playerY - y; float const vx = playerXVelocity - xVelocity; float const vy = playerYVelocity - yVelocity; float const a = vx * vx + vy * vy - bulletSpeed * bulletSpeed; float const b = 2.f * (vx * dx + vy * dy); float const c = dx * dx + dy * dy; float const disc = b * b - 4.f * a * c; shouldShoot = false; if (disc >= 0.f) { float t0 = (-b - std::sqrt(disc)) / (2.f * a); float t1 = (-b + std::sqrt(disc)) / (2.f * a); if (t0 < 0.f || (t1 < t0 && t1 >= 0.f)) { t0 = t1; } if (t0 >= 0.f) { float shootx = vx + dx / t0; float shooty = vy + dy / t0; heading = std::atan2(shooty, shootx) * RAD2DEGREE; } shouldShoot = true; }

Read the article

Copies of GameScene created when called additional times

- by Orin MacGregor

I have a game with a level select managed by a SceneManager, which basically just uses ReplaceScene. The first time I load a level everything works fine. On subsequent calls, for example: completing the level and continuing to the next, things blow up. The level loads fine, but when I try to pan the map or try to move the player the game crashes. Debugging through I found that there are multiple occurrences of self and related children like player and mapLayer. As a test, I put this code in my ccTouchesBegan: NSLog(@"test %i", [self retainCount]); The first time a level is loaded, it gives: test 2 The second time I load a level it gives: test 2 test 1 as in it spits out both values by looping through twice, not just appending an output to the last. It continues with this pattern for each subsequent load. So the third time will give 2 1 1. Particular code that causes the game to crash involve calling _tileMap.tileSize because there is a second GameScene with a tileMap that was supposedly destroyed, so it has tileSize and mapSize of 0. I noticed dealloc doesn't really ever get called, so I tried to manage some things with -(void) onExit -(void) onExit { [self unscheduleAllSelectors]; [_player stopAllActions]; //stop any animations just in case. normally handled in ccTouchesEnded [self removeAllChildrenWithCleanup:YES]; } I never replace the GameScene while I'm in a GameScene; if the level is completed it goes to a GameOver scene, or I use a back button that goes to the LevelSelect scene. This is [the relevant parts of] my init, in case something like the adding of children matters: -(id) init { _mapLayer = [CCLayer node]; //load data for level GameData *gameData = [GameDataParser loadData]; int selectedChapter = gameData.selectedChapter; int selectedLevel = gameData.selectedLevel; Levels *chapterLevels = [LevelParser loadLevelsForChapter:selectedChapter]; //loop until we get selected level, then do stuff for (Level *level in chapterLevels.levels) { if (level.number == selectedLevel) { //load the level map _tileMap = [CCTMXTiledMap tiledMapWithTMXFile:level.file]; } } _background = [_tileMap layerNamed:@"Background"]; _foreground = [_tileMap layerNamed:@"Foreground"]; _meta = [_tileMap layerNamed:@"Meta"]; _meta.visible = NO; //initialize Spawn Point object and place player there CCTMXObjectGroup *objects = [_tileMap objectGroupNamed:@"Objects"]; NSAssert(objects != nil, @"'Objects' object group not found"); NSMutableDictionary *spawnPoint = [objects objectNamed:@"SpawnPoint"]; NSAssert(spawnPoint != nil, @"SpawnPoint object not found"); int x = [[spawnPoint valueForKey:@"x"] intValue] / retinaScaling; int y = [[spawnPoint valueForKey:@"y"] intValue] / retinaScaling; //setup animations [[CCSpriteFrameCache sharedSpriteFrameCache] addSpriteFramesWithFile:@"MouseRightAnim_24x21.plist"]; CCSpriteBatchNode *spriteSheet = [CCSpriteBatchNode batchNodeWithFile:@"MouseRightAnim_24x21.png"]; [_mapLayer addChild:spriteSheet z:1]; NSMutableArray *rightAnimFrames = [NSMutableArray array]; for(int i = 1; i <= 3; ++i) { [rightAnimFrames addObject: [[CCSpriteFrameCache sharedSpriteFrameCache] spriteFrameByName: [NSString stringWithFormat:@"MouseRight%d_24x21.png", i]]]; } CCAnimation *rightAnim = [CCAnimation animationWithSpriteFrames:rightAnimFrames delay:0.1f]; self.player = [CCSprite spriteWithSpriteFrameName:@"MouseRight2_24x21.png"]; _player.position = ccp(x, y); self.rightAction = [CCRepeatForever actionWithAction:[CCAnimate actionWithAnimation:rightAnim]]; rightAnim.restoreOriginalFrame = NO; [spriteSheet addChild:_player]; //get map size in pixels mapHeight = _tileMap.contentSize.height; mapWidth = _tileMap.contentSize.width; //setup defaults //this value works well for the calculation later, trial and error really distance = 150; lastGoodDistance = 150; mapScale = 1; [self setViewpointCenter:_player.position]; [_mapLayer addChild:_tileMap]; [self addChild:_mapLayer z:-1]; self.isTouchEnabled = YES; } return self; } And here's the SceneManager code for replacing scenes: +(void) goGameScene { CCLayer *gameLayer = [GameScene node]; [SceneManager go:gameLayer:[GameHUD node]]; } //this is what every call looks like besides the GameScene one above +(void) goLevelSelect { [SceneManager go:[LevelSelect node]:nil]; } +(void) go:(CCLayer *)layer: (CCLayer *)hudLayer { CCDirector *director = [CCDirector sharedDirector]; CCScene *newScene = [SceneManager wrap:layer:hudLayer]; if ([director runningScene]) { [director replaceScene:newScene]; } else { [director runWithScene:newScene]; } } +(CCScene *) wrap:(CCLayer *)layer: (CCLayer *)hudLayer { CCScene *newScene = [CCScene node]; [newScene addChild: layer]; if (hudLayer != nil) { [newScene addChild: hudLayer z:1]; } return newScene; } Any ideas why I'm getting these fatal artifacts? I'm hoping this isn't considered too localized since it basically combines 3 tutorials that anyone could end up following. (Ray Wenderlich Animations, Tim Roadley Scene Manager, Pan and Zoom with Tiled Maps.

Read the article

Using Subjects to Deploy Queries Dynamically

- by Roman Schindlauer

In the previous blog posting, we showed how to construct and deploy query fragments to a StreamInsight server, and how to re-use them later. In today’s posting we’ll integrate this pattern into a method of dynamically composing a new query with an existing one. The construct that enables this scenario in StreamInsight V2.1 is a Subject. A Subject lets me create a junction element in an existing query that I can tap into while the query is running. To set this up as an end-to-end example, let’s first define a stream simulator as our data source: var generator = myApp.DefineObservable( (TimeSpan t) => Observable.Interval(t).Select(_ => new SourcePayload())); This ‘generator’ produces a new instance of SourcePayload with a period of t (system time) as an IObservable. SourcePayload happens to have a property of type double as its payload data. Let’s also define a sink for our example—an IObserver of double values that writes to the console: var console = myApp.DefineObserver( (string label) => Observer.Create<double>(e => Console.WriteLine("{0}: {1}", label, e))) .Deploy("ConsoleSink"); The observer takes a string as parameter which is used as a label on the console, so that we can distinguish the output of different sink instances. Note that we also deploy this observer, so that we can retrieve it later from the server from a different process. Remember how we defined the aggregation as an IQStreamable function in the previous article? We will use that as well: var avg = myApp .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) => from win in s.TumblingWindow(w) select win.Avg(e => e.Value)) .Deploy("AverageQuery"); Then we define the Subject, which acts as an observable sequence as well as an observer. Thus, we can feed a single source into the Subject and have multiple consumers—that can come and go at runtime—on the other side: var subject = myApp.CreateSubject("Subject", () => new Subject<SourcePayload>()); Subject are always deployed automatically. Their name is used to retrieve them from a (potentially) different process (see below). Note that the Subject as we defined it here doesn’t know anything about temporal streams. It is merely a sequence of SourcePayloads, without any notion of StreamInsight point events or CTIs. So in order to compose a temporal query on top of the Subject, we need to 'promote' the sequence of SourcePayloads into an IQStreamable of point events, including CTIs: var stream = subject.ToPointStreamable( e => PointEvent.CreateInsert<SourcePayload>(e.Timestamp, e), AdvanceTimeSettings.StrictlyIncreasingStartTime); In a later posting we will show how to use Subjects that have more awareness of time and can be used as a junction between QStreamables instead of IQbservables. Having turned the Subject into a temporal stream, we can now define the aggregate on this stream. We will use the IQStreamable entity avg that we defined above: var longAverages = avg(stream, TimeSpan.FromSeconds(5)); In order to run the query, we need to bind it to a sink, and bind the subject to the source: var standardQuery = longAverages .Bind(console("5sec average")) .With(generator(TimeSpan.FromMilliseconds(300)).Bind(subject)); Lastly, we start the process: standardQuery.Run("StandardProcess"); Now we have a simple query running end-to-end, producing results. What follows next is the crucial part of tapping into the Subject and adding another query that runs in parallel, using the same query definition (the “AverageQuery”) but with a different window length. We are assuming that we connected to the same StreamInsight server from a different process or even client, and thus have to retrieve the previously deployed entities through their names: // simulate the addition of a 'fast' query from a separate server connection, // by retrieving the aggregation query fragment // (instead of simply using the 'avg' object) var averageQuery = myApp .GetStreamable<IQStreamable<SourcePayload>, TimeSpan, double>("AverageQuery"); // retrieve the input sequence as a subject var inputSequence = myApp .GetSubject<SourcePayload, SourcePayload>("Subject"); // retrieve the registered sink var sink = myApp.GetObserver<string, double>("ConsoleSink"); // turn the sequence into a temporal stream var stream2 = inputSequence.ToPointStreamable( e => PointEvent.CreateInsert<SourcePayload>(e.Timestamp, e), AdvanceTimeSettings.StrictlyIncreasingStartTime); // apply the query, now with a different window length var shortAverages = averageQuery(stream2, TimeSpan.FromSeconds(1)); // bind new sink to query and run it var fastQuery = shortAverages .Bind(sink("1sec average")) .Run("FastProcess"); The attached solution demonstrates the sample end-to-end. Regards, The StreamInsight Team

Read the article

Who could ask for more with LESS CSS? (Part 1 of 3–Features)

- by ToStringTheory

It wasn’t very long ago that I first began to get into CSS precompilers such as SASS (Syntactically Awesome Stylesheets) and LESS (The Dynamic Stylesheet Language) and I had been hooked on the idea since. When I finally had a new project come up, I leapt at the opportunity to try out one of these languages. Introduction To be honest, I was hesitant at first to add either framework as I didn’t really know much more than what I had read on their homepages, and I didn’t like the idea of adding too much complexity to a project - I couldn’t guarantee I would be the only person to support it in the future. Thankfully, both of these languages just add things into CSS. You don’t HAVE to know LESS or SASS to do anything, you can still do your old school CSS, and your output will be the same. However, when you want to start doing more advanced things such as variables, mixins, and color functions, the functionality is all there for you to utilize. From what I had read, SASS has a few more features than LESS, which is why I initially tried to figure out how to incorporate it into a MVC 4 project. However, through my research, I couldn’t find a way to accomplish this without including some bit of the Ruby on Rails framework on the computer running it, and I hated the fact that I had to do that. Besides SASS, there is little chance of me getting into the RoR framework, at least in the next couple years. So in the end, I settled with using LESS. Features So, what can LESS (or SASS) do for you? There are several reasons I have come to love it in the past few weeks. 1 – Constants Using LESS, you can finally declare a constant and use its value across an entire CSS file. The case that most people would be familiar with is colors. Wanting to declare one or two color variables that comprise the theme of the site, and not have to retype out their specific hex code each time, but rather a variable name. What’s great about this is that if you end up having to change it, you only have to change it in one place. An important thing to note is that you aren’t limited to creating constants just for colors, but for strings and measurements as well. 2 – Inheritance This is a cool feature in my mind for simplicity and organization. Both LESS and SASS allow you to place selectors within other selectors, and when it is compiled, the languages will break the rules out as necessary and keep the inheritance chain you created in the selectors. Example LESS Code: #header { h1 { font-size: 26px; font-weight: bold; } p { font-size: 12px; a { text-decoration: none; &:hover { border-width: 1px } } } } Example Compiled CSS: #header h1 { font-size: 26px; font-weight: bold; } #header p { font-size: 12px; } #header p a { text-decoration: none; } #header p a:hover { border-width: 1px; } 3 - Mixins Mixins are where languages like this really shine. The ability to mixin other definitions setup a parametric mixin. There is really a lot of content in this area, so I would suggest looking at http://lesscss.org for more information. One of the things I would suggest if you do begin to use LESS is to also grab the mixins.less file from the Twitter Bootstrap project. This file already has a bunch of predefined mixins for things like border-radius with all of the browser specific prefixes. This alone is of great use! 4 – Color Functions This is the last thing I wanted to point out as my final post in this series will be utilizing these functions in a more drawn out manner. Both LESS and SASS provide functions for getting information from a color (R,G,B,H,S,L). Using these, it is easy to define a primary color, and then darken or lighten it a little for your needs. Example: Example LESS Code: @base-color: #111; @red: #842210; #footer { color: (@base-color + #003300); border-left: 2px; border-right: 2px; border-color: desaturate(@red, 10%); } Example Compiled CSS: #footer { color: #114411; border-left: 2px; border-right: 2px; border-color: #7d2717; } I have found that these can be very useful and powerful when constructing a site theme. Conclusion I came across LESS and SASS when looking for the best way to implement some type of CSS variables for colors, because I hated having to do a Find and Replace in all of the files using the colors, and in some instances, you couldn’t just find/replace because of the color choices interfering with other colors (color to replace of #000, yet come colors existed like #0002bc). So in many cases I would end up having to do a Find and manually check each one. In my next post, I am going to cover how I’ve come to set up these items and the structure for the items in the project, as well as the conventions that I have come to start using. In the final post in the series, I will cover a neat little side project I built in LESS dealing with colors!

Read the article

C++ strongly typed typedef

- by Kian

I've been trying to think of a way of declaring strongly typed typedefs, to catch a certain class of bugs in the compilation stage. It's often the case that I'll typedef an int into several types of ids, or a vector to position or velocity: typedef int EntityID; typedef int ModelID; typedef Vector3 Position; typedef Vector3 Velocity; This can make the intent of code more clear, but after a long night of coding one might make silly mistakes like comparing different kinds of ids, or adding a position to a velocity perhaps. EntityID eID; ModelID mID; if ( eID == mID ) // <- Compiler sees nothing wrong { /*bug*/ } Position p; Velocity v; Position newP = p + v; // bug, meant p + v*s but compiler sees nothing wrong Unfortunately, suggestions I've found for strongly typed typedefs include using boost, which at least for me isn't a possibility (I do have c++11 at least). So after a bit of thinking, I came upon this idea, and wanted to run it by someone. First, you declare the base type as a template. The template parameter isn't used for anything in the definition, however: template < typename T > class IDType { unsigned int m_id; public: IDType( unsigned int const& i_id ): m_id {i_id} {}; friend bool operator==<T>( IDType<T> const& i_lhs, IDType<T> const& i_rhs ); }; Friend functions actually need to be forward declared before the class definition, which requires a forward declaration of the template class. We then define all the members for the base type, just remembering that it's a template class. Finally, when we want to use it, we typedef it as: class EntityT; typedef IDType<EntityT> EntityID; class ModelT; typedef IDType<ModelT> ModelID; The types are now entirely separate. Functions that take an EntityID will throw a compiler error if you try to feed them a ModelID instead, for example. Aside from having to declare the base types as templates, with the issues that entails, it's also fairly compact. I was hoping anyone had comments or critiques about this idea? One issue that came to mind while writing this, in the case of positions and velocities for example, would be that I can't convert between types as freely as before. Where before multiplying a vector by a scalar would give another vector, so I could do: typedef float Time; typedef Vector3 Position; typedef Vector3 Velocity; Time t = 1.0f; Position p = { 0.0f }; Velocity v = { 1.0f, 0.0f, 0.0f }; Position newP = p + v*t; With my strongly typed typedef I'd have to tell the compiler that multypling a Velocity by a Time results in a Position. class TimeT; typedef Float<TimeT> Time; class PositionT; typedef Vector3<PositionT> Position; class VelocityT; typedef Vector3<VelocityT> Velocity; Time t = 1.0f; Position p = { 0.0f }; Velocity v = { 1.0f, 0.0f, 0.0f }; Position newP = p + v*t; // Compiler error To solve this, I think I'd have to specialize every conversion explicitly, which can be kind of a bother. On the other hand, this limitation can help prevent other kinds of errors (say, multiplying a Velocity by a Distance, perhaps, which wouldn't make sense in this domain). So I'm torn, and wondering if people have any opinions on my original issue, or my approach to solving it.

Read the article

Can't connect to SSL web service with WS-Security using PHP SOAP extension - certificate, complex WSDL

- by BillF

Using the PHP5 SOAP extension I have been unable to connect to a web service having an https endpoint, with client certificate and using WS-Security, although I can connect using soapUI with the exact same wsdl and client certificate, and obtain the normal response to the request. There is no HTTP authentication and no proxy is involved. The message I get is 'Could not connect to host'. Have been able to verify that I am NOT hitting the host server. (Earlier I wrongly said that I was hitting the server.) The self-signed client SSL certificate is a .pem file converted by openssl from a .p12 keystore which in turn was converted by keytool from a .jks keystore having a single entry consisting of private key and client certificate. In soapUI I did not need to supply a server private certificate, the only two files I gave it were the wdsl and pem. I did have to supply the pem and its passphrase to be able to connect. I am speculating that despite the error message my problem might actually be in the formation of the XML request rather than the SSL connection itself. The wsdl I have been given has nested complex types. The php server is on my Windows XP laptop with IIS. The code, data values and WSDL extracts are shown below. (The WSSoapClient class simply extends SoapClient, adding a WS-Security Username Token header with mustUnderstand = true and including a nonce, both of which the soapUI call had required.) Would so much appreciate any help. I'm a newbie thrown in at the deep end, and how! Have done vast amounts of Googling on this over many days, following many suggestions and have read Pro PHP by Kevin McArthur. An attempt to use classmaps in place of nested arrays also fell flat. The Code class STEeService { public function invokeWebService(array $connection, $operation, array $request) { try { $localCertificateFilespec = $connection['localCertificateFilespec']; $localCertificatePassphrase = $connection['localCertificatePassphrase']; $sslOptions = array( 'ssl' => array( 'local_cert' => $localCertificateFilespec, 'passphrase' => $localCertificatePassphrase, 'allow_self-signed' => true, 'verify_peer' => false ) ); $sslContext = stream_context_create($sslOptions); $clientArguments = array( 'stream_context' => $sslContext, 'local_cert' => $localCertificateFilespec, 'passphrase' => $localCertificatePassphrase, 'trace' => true, 'exceptions' => true, 'encoding' => 'UTF-8', 'soap_version' => SOAP_1_1 ); $oClient = new WSSoapClient($connection['wsdlFilespec'], $clientArguments); $oClient->__setUsernameToken($connection['username'], $connection['password']); return $oClient->__soapCall($operation, $request); } catch (exception $e) { throw new Exception("Exception in eServices " . $operation . " ," . $e->getMessage(), "\n"); } } } $connection is as follows: array(5) { ["username"]=> string(8) "DFU00050" ["password"]=> string(10) "Fabricate1" ["wsdlFilespec"]=> string (63) "c:/inetpub/wwwroot/DMZExternalService_Concrete_WSDL_Staging.xml" ["localCertificateFilespec"]=> string(37) "c:/inetpub/wwwroot/ClientKeystore.pem" ["localCertificatePassphrase"]=> string(14) "password123456" } $clientArguments is as follows: array(7) { ["stream_context"]=> resource(8) of type (stream-context) ["local_cert"]=> string(37) "c:/inetpub/wwwroot/ClientKeystore.pem" ["passphrase"]=> string(14) "password123456" ["trace"]=> bool(true) ["exceptions"]=> bool(true) ["encoding"]=> string(5) "UTF-8" ["soap_version"]=> int(1) } $operation is as follows: 'getConsignmentDetails' $request is as follows: array(1) { [0]=> array(2) { ["header"]=> array(2) { ["source"]=> string(9) "customerA" ["accountNo"]=> string(8) "10072906" } ["consignmentId"]=> string(11) "GKQ00000085" } } Note how there is an extra level of nesting, an array wrapping the request which is itself an array. This was suggested in a post although I don't see the reason, but it seems to help avoid other exceptions. The exception thrown by ___soapCall is as follows: object(SoapFault)#6 (9) { ["message":protected]=> string(25) "Could not connect to host" ["string":"Exception":private]=> string(0) "" ["code":protected]=> int(0) ["file":protected]=> string(43) "C:\Inetpub\wwwroot\eServices\WSSecurity.php" ["line":protected]=> int(85) ["trace":"Exception":private]=> array(5) { [0]=> array(6) { ["file"]=> string(43) "C:\Inetpub\wwwroot\eServices\WSSecurity.php" ["line"]=> int(85) ["function"]=> string(11) "__doRequest" ["class"]=> string(10) "SoapClient" ["type"]=> string(2) "->" ["args"]=> array(4) { [0]=> string(1240) " DFU00050 Fabricate1 E0ByMUA= 2010-10-28T13:13:52Z customerA10072906GKQ00000085 " [1]=> string(127) "https://services.startrackexpress.com.au:7560/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1" [2]=> string(104) "/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1/getConsignmentDetails" [3]=> int(1) } } [1]=> array(4) { ["function"]=> string(11) "__doRequest" ["class"]=> string(39) "startrackexpress\eservices\WSSoapClient" ["type"]=> string(2) "->" ["args"]=> array(5) { [0]=> string(1240) " DFU00050 Fabricate1 E0ByMUA= 2010-10-28T13:13:52Z customerA10072906GKQ00000085 " [1]=> string(127) "https://services.startrackexpress.com.au:7560/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1" [2]=> string(104) "/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1/getConsignmentDetails" [3]=> int(1) [4]=> int(0) } } [2]=> array(6) { ["file"]=> string(43) "C:\Inetpub\wwwroot\eServices\WSSecurity.php" ["line"]=> int(70) ["function"]=> string(10) "__soapCall" ["class"]=> string(10) "SoapClient" ["type"]=> string(2) "->" ["args"]=> array(4) { [0]=> string(21) "getConsignmentDetails" [1]=> array(1) { [0]=> array(2) { ["header"]=> array(2) { ["source"]=> string(9) "customerA" ["accountNo"]=> string(8) "10072906" } ["consignmentId"]=> string(11) "GKQ00000085" } } [2]=> NULL [3]=> object(SoapHeader)#5 (4) { ["namespace"]=> string(81) "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" ["name"]=> string(8) "Security" ["data"]=> object(SoapVar)#4 (2) { ["enc_type"]=> int(147) ["enc_value"]=> string(594) " DFU00050 Fabricate1 E0ByMUA= 2010-10-28T13:13:52Z " } ["mustUnderstand"]=> bool(true) } } } [3]=> array(6) { ["file"]=> string(42) "C:\Inetpub\wwwroot\eServices\eServices.php" ["line"]=> int(87) ["function"]=> string(10) "__soapCall" ["class"]=> string(39) "startrackexpress\eservices\WSSoapClient" ["type"]=> string(2) "->" ["args"]=> array(2) { [0]=> string(21) "getConsignmentDetails" [1]=> array(1) { [0]=> array(2) { ["header"]=> array(2) { ["source"]=> string(9) "customerA" ["accountNo"]=> string(8) "10072906" } ["consignmentId"]=> string(11) "GKQ00000085" } } } } [4]=> array(6) { ["file"]=> string(58) "C:\Inetpub\wwwroot\eServices\EnquireConsignmentDetails.php" ["line"]=> int(44) ["function"]=> string(16) "invokeWebService" ["class"]=> string(38) "startrackexpress\eservices\STEeService" ["type"]=> string(2) "->" ["args"]=> array(3) { [0]=> array(5) { ["username"]=> string(10) "DFU00050 " ["password"]=> string(12) "Fabricate1 " ["wsdlFilespec"]=> string(63) "c:/inetpub/wwwroot/DMZExternalService_Concrete_WSDL_Staging.xml" ["localCertificateFilespec"]=> string(37) "c:/inetpub/wwwroot/ClientKeystore.pem" ["localCertificatePassphrase"]=> string(14) "password123456" } [1]=> string(21) "getConsignmentDetails" [2]=> array(1) { [0]=> array(2) { ["header"]=> array(2) { ["source"]=> string(9) "customerA" ["accountNo"]=> string(8) "10072906" } ["consignmentId"]=> string(11) "GKQ00000085" } } } } } ["previous":"Exception":private]=> NULL ["faultstring"]=> string(25) "Could not connect to host" ["faultcode"]=> string(4) "HTTP" } Here are some WSDL extracts (TIBCO BusinessWorks): <xsd:complexType name="TransactionHeaderType"> <xsd:sequence> <xsd:element name="source" type="xsd:string"/> <xsd:element name="accountNo" type="xsd:integer"/> <xsd:element name="userId" type="xsd:string" minOccurs="0"/> <xsd:element name="transactionId" type="xsd:string" minOccurs="0"/> <xsd:element name="transactionDatetime" type="xsd:dateTime" minOccurs="0"/> </xsd:sequence> </xsd:complexType> <xsd:element name="getConsignmentDetailRequest"> <xsd:complexType> <xsd:sequence> <xsd:element name="header" type="prim:TransactionHeaderType"/> <xsd:element name="consignmentId" type="prim:ID" maxOccurs="unbounded"/> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:element name="getConsignmentDetailResponse"> <xsd:complexType> <xsd:sequence> <xsd:element name="consignment" type="freight:consignmentType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:element name="getConsignmentDetailRequest"> <xsd:complexType> <xsd:sequence> <xsd:element name="header" type="prim:TransactionHeaderType"/> <xsd:element name="consignmentId" type="prim:ID" maxOccurs="unbounded"/> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:element name="getConsignmentDetailResponse"> <xsd:complexType> <xsd:sequence> <xsd:element name="consignment" type="freight:consignmentType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> </xsd:complexType> </xsd:element> <wsdl:operation name="getConsignmentDetails"> <wsdl:input message="tns:getConsignmentDetailsRequest"/> <wsdl:output message="tns:getConsignmentDetailsResponse"/> <wsdl:fault name="fault1" message="tns:fault"/> </wsdl:operation> <wsdl:service name="ExternalOps"> <wsdl:port name="OperationsEndpoint1" binding="tns:OperationsEndpoint1Binding"> <soap:address location="https://services.startrackexpress.com.au:7560/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1"/> </wsdl:port> </wsdl:service> And here in case it's relevant is the WSSoapClient class: <?PHP namespace startrackexpress\eservices; use SoapClient, SoapVar, SoapHeader; class WSSoapClient extends SoapClient { private $username; private $password; /*Generates a WS-Security header*/ private function wssecurity_header() { $timestamp = gmdate('Y-m-d\TH:i:s\Z'); $nonce = mt_rand(); $passdigest = base64_encode(pack('H*', sha1(pack('H*', $nonce).pack('a*', $timestamp).pack('a*', $this->password)))); $auth = ' <wsse:Security SOAP-ENV:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:UsernameToken> <wsse:Username>' . $this->username . '</wsse:Username> <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">' . $this->password . '</wsse:Password> <wsse:Nonce>' . base64_encode(pack('H*', $nonce)).'</wsse:Nonce> <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">' . $timestamp . '</wsu:Created> </wsse:UsernameToken> </wsse:Security> '; $authvalues = new SoapVar($auth, XSD_ANYXML); $header = new SoapHeader("http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd", "Security",$authvalues, true); return $header; } // Sets a username and passphrase public function __setUsernameToken($username,$password) { $this->username=$username; $this->password=$password; } // Overwrites the original method, adding the security header public function __soapCall($function_name, $arguments, $options=null, $input_headers=null, $output_headers=null) { try { $result = parent::__soapCall($function_name, $arguments, $options, $this->wssecurity_header()); return $result; } catch (exception $e) { throw new Exception("Exception in __soapCall, " . $e->getMessage(), "\n"); } } } ?> Update: The request XML would have been as follows: <?xml version="1.0" encoding="UTF-8"?> <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://startrackexpress/Common/Primitives/v1" xmlns:ns2="http://startrackexpress/Common/actions/externals/Consignment/v1" xmlns:ns3="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <SOAP-ENV:Header> <wsse:Security SOAP-ENV:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:UsernameToken> <wsse:Username>DFU00050</wsse:Username> <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">Fabricate1</wsse:Password> <wsse:Nonce>M4FIeGA=</wsse:Nonce> <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2010-10-29T14:05:27Z</wsu:Created> </wsse:UsernameToken> </wsse:Security> </SOAP-ENV:Header> <SOAP-ENV:Body><ns2:getConsignmentDetailRequest> <ns2:header><ns1:source>customerA</ns1:source><ns1:accountNo>10072906</ns1:accountNo></ns2:header> <ns2:consignmentId>GKQ00000085</ns2:consignmentId> </ns2:getConsignmentDetailRequest></SOAP-ENV:Body> </SOAP-ENV:Envelope> This was obtained with the following code in WSSoapClient: public function __doRequest($request, $location, $action, $version) { echo "<p> " . htmlspecialchars($request) . " </p>" ; return parent::__doRequest($request, $location, $action, $version); }

Read the article

Referencing movie clips from within an actionscript class

- by Ant

Hi all, I have been given the task of adding a scoring system to various flash games. This simply involves taking input, adding functionality such as pausing and replaying and then outputting the score, time left etc. at the end. I've so far successfully edited two games. Both these games used the "actions" code on frames. The latest game I'm trying to do uses an actionscript class which makes it both easier and harder. I'm not very adept at flash at all, but I've worked it out so far. I've added various movie clips that are to be used for displaying the pause screen background, buttons for replaying etc. I've been showing and hiding these using: back._visible = true; //movie clip, instance of back (back.png) I doubt it's best practice, but it's quick and has been working. However, now with the change of coding style to classes, this doesn't seem to work. I kinda understand why, but I'm now unsure how to hide/show these elements. Any help would be greatly appreciated :) I've attached the modified AS. class RivalOrbs extends MovieClip { var infinite_levels, orbs_start, orbs_inc, orbs_per_level, show_timer, _parent, one_time_per_level, speed_start, speed_inc_percent, max_speed, percent_starting_on_wrong_side, colorize, colors, secs_per_level; function RivalOrbs() { super(); mc = this; this.init(); } // End of the function function get_num_orbs() { if (infinite_levels) { return (orbs_start + (level - 1) * orbs_inc); } else if (level > orbs_per_level.length) { return (0); } else { return (orbs_per_level[level - 1]); } // end else if } // End of the function function get_timer_str(secs) { var _loc2 = Math.floor(secs / 60); var _loc1 = secs % 60; return ((_loc2 > 0 ? (_loc2) : ("0")) + ":" + (_loc1 >= 10 ? (_loc1) : ("0" + _loc1))); } // End of the function function frame() { //PLACE PAUSE CODE HERE if (!Key.isDown(80) and !Key.isDown(Key.ESCAPE)) { _root.offKey = true; } else if (Key.isDown(80) or Key.isDown(Key.ESCAPE)) { if (_root.offKey and _root.game_mode == "play") { _root.game_mode = "pause"; /* back._visible = true; btn_resume._visible = true; btn_exit._visible = true; txt_pause._visible = true; */ } else if (_root.offKey and _root.game_mode == "pause") { _root.game_mode = "play"; } _root.offKey = false; } if (_root.game_mode == "pause" or paused) { return; } else { /* back._visible = false; btn_resume._visible = false; btn_exit._visible = false; txt_pause._visible = false; */ } if (show_timer && total_secs != -1 || show_timer && _parent.timesup) { _loc7 = total_secs - Math.ceil((getTimer() - timer) / 1000); var diff = oldSeconds - (_loc7 + additional); if (diff > 1) additional = additional + diff; _loc7 = _loc7 + additional; oldSeconds = _loc7; trace(oldSeconds); mc.timer_field.text = this.get_timer_str(Math.max(0, _loc7)); if (_loc7 <= -1 || _parent.timesup) { if (one_time_per_level) { _root.gotoAndPlay("Lose"); } else { this.show_dialog(false); return; } // end if } // end if } // end else if var _loc9 = _root._xmouse; var _loc8 = _root._ymouse; var _loc6 = {x: _loc9, y: _loc8}; mc.globalToLocal(_loc6); _loc6.y = Math.max(-mc.bg._height / 2 + gap / 2, _loc6.y); _loc6.y = Math.min(mc.bg._height / 2 - gap / 2, _loc6.y); mc.wall1._y = _loc6.y - gap / 2 - mc.wall1._height / 2; mc.wall2._y = _loc6.y + gap / 2 + mc.wall1._height / 2; var _loc5 = true; for (var _loc4 = 0; _loc4 < this.get_num_orbs(); ++_loc4) { var _loc3 = mc.stage["orb" + _loc4]; _loc3.x_last = _loc3._x; _loc3.y_last = _loc3._y; _loc3._x = _loc3._x + _loc3.x_speed; _loc3._y = _loc3._y + _loc3.y_speed; if (_loc3._x < l_thresh) { _loc3.x_speed = _loc3.x_speed * -1; _loc3._x = l_thresh + (l_thresh - _loc3._x); _loc3.gotoAndPlay("hit"); } // end if if (_loc3._x > r_thresh) { _loc3.x_speed = _loc3.x_speed * -1; _loc3._x = r_thresh - (_loc3._x - r_thresh); _loc3.gotoAndPlay("hit"); } // end if if (_loc3._y < t_thresh) { _loc3.y_speed = _loc3.y_speed * -1; _loc3._y = t_thresh + (t_thresh - _loc3._y); _loc3.gotoAndPlay("hit"); } // end if if (_loc3._y > b_thresh) { _loc3.y_speed = _loc3.y_speed * -1; _loc3._y = b_thresh - (_loc3._y - b_thresh); _loc3.gotoAndPlay("hit"); } // end if if (_loc3.x_speed > 0) { if (_loc3._x >= m1_thresh && _loc3.x_last < m1_thresh || _loc3._x >= m1_thresh && _loc3._x <= m2_thresh) { if (_loc3._y <= mc.wall1._y + mc.wall1._height / 2 || _loc3._y >= mc.wall2._y - mc.wall2._height / 2) { _loc3.x_speed = _loc3.x_speed * -1; _loc3._x = m1_thresh - (_loc3._x - m1_thresh); _loc3.gotoAndPlay("hit"); } // end if } // end if } else if (_loc3._x <= m2_thresh && _loc3.x_last > m2_thresh || _loc3._x >= m1_thresh && _loc3._x <= m2_thresh) { if (_loc3._y <= mc.wall1._y + mc.wall1._height / 2 || _loc3._y >= mc.wall2._y - mc.wall2._height / 2) { _loc3.x_speed = _loc3.x_speed * -1; _loc3._x = m2_thresh + (m2_thresh - _loc3._x); _loc3.gotoAndPlay("hit"); } // end if } // end else if if (_loc3.side == 1 && _loc3._x > 0) { _loc5 = false; } // end if if (_loc3.side == 2 && _loc3._x < 0) { _loc5 = false; } // end if } // end of for if (_loc5) { this.end_level(); } // end if } // End of the function function colorize_hex(mc, hex) { var _loc4 = hex >> 16; var _loc5 = (hex ^ hex >> 16 << 16) >> 8; var _loc3 = hex >> 8 << 8 ^ hex; var _loc2 = new flash.geom.ColorTransform(0, 0, 0, 1, _loc4, _loc5, _loc3, 0); mc.transform.colorTransform = _loc2; } // End of the function function tint_hex(mc, hex, amount) { var _loc4 = hex >> 16; var _loc5 = hex >> 8 & 255; var _loc3 = hex & 255; this.tint(mc, _loc4, _loc5, _loc3, amount); } // End of the function function tint(mc, r, g, b, amount) { var _loc4 = 100 - amount; var _loc1 = new Object(); _loc1.ra = _loc1.ga = _loc1.ba = _loc4; var _loc2 = amount / 100; _loc1.rb = r * _loc2; _loc1.gb = g * _loc2; _loc1.bb = b * _loc2; var _loc3 = new Color(mc); _loc3.setTransform(_loc1); } // End of the function function get_num_levels() { if (infinite_levels) { return (Number.MAX_VALUE); } else { return (orbs_per_level.length); } // end else if } // End of the function function end_level() { _global.inputTimeAvailable = _global.inputTimeAvailable - (60 - oldSeconds); ++level; _parent.levelOver = true; if (level <= this.get_num_levels()) { this.show_dialog(true); } else { _root.gotoAndPlay("Win"); } // end else if } // End of the function function get_speed() { var _loc3 = speed_start; for (var _loc2 = 0; _loc2 < level - 1; ++_loc2) { _loc3 = _loc3 + _loc3 * (speed_inc_percent / 100); } // end of for return (Math.min(_loc3, Math.max(max_speed, speed_start))); } // End of the function function init_orbs() { var _loc6 = this.get_speed(); var _loc7 = Math.max(1, Math.ceil(this.get_num_orbs() * (percent_starting_on_wrong_side / 100))); for (var _loc3 = 0; _loc3 < this.get_num_orbs(); ++_loc3) { var _loc2 = null; if (_loc3 % 2 == 0) { _loc2 = mc.stage.attachMovie("Orb1", "orb" + _loc3, _loc3); _loc2.side = 1; if (colorize && color1 != -1) { this.colorize_hex(_loc2.orb.bg, color1); } // end if _loc2._x = Math.random() * (mc.bg._width * 4.000000E-001) - mc.bg._width * 2.000000E-001 - mc.bg._width / 4; } else { _loc2 = mc.stage.attachMovie("Orb2", "orb" + _loc3, _loc3); _loc2.side = 2; if (colorize && color2 != -1) { this.colorize_hex(_loc2.orb.bg, color2); } // end if _loc2._x = Math.random() * (mc.bg._width * 4.000000E-001) - mc.bg._width * 2.000000E-001 + mc.bg._width / 4; } // end else if _loc2._width = _loc2._height = orb_w; _loc2._y = Math.random() * (mc.bg._height * 8.000000E-001) - mc.bg._height * 4.000000E-001; if (_loc3 < _loc7) { _loc2._x = _loc2._x * -1; } // end if var _loc5 = Math.random() * 60; var _loc4 = _loc5 / 180 * 3.141593E+000; _loc2.x_speed = Math.cos(_loc4) * _loc6; _loc2.y_speed = Math.sin(_loc4) * _loc6; if (Math.random() >= 5.000000E-001) { _loc2.x_speed = _loc2.x_speed * -1; } // end if if (Math.random() >= 5.000000E-001) { _loc2.y_speed = _loc2.y_speed * -1; } // end if } // end of for } // End of the function function init_colors() { if (colorize && colors.length >= 2) { color1 = colors[Math.floor(Math.random() * colors.length)]; for (color2 = colors[Math.floor(Math.random() * colors.length)]; color2 == color1; color2 = colors[Math.floor(Math.random() * colors.length)]) { } // end of for this.tint_hex(mc.side1, color1, 40); this.tint_hex(mc.side2, color2, 40); } else { color1 = -1; color2 = -1; } // end else if } // End of the function function get_total_secs() { if (show_timer) { if (secs_per_level.length > 0) { if (level > secs_per_level.length) { return (secs_per_level[secs_per_level.length - 1]); } else { return (secs_per_level[level - 1]); } // end if } // end if } // end else if return (-1); } // End of the function function start_level() { trace ("start_level"); _parent.timesup = false; _parent.levelOver = false; _parent.times_up_comp.start_timer(); this.init_orbs(); mc.level_field.text = "LEVEL " + level; total_secs = _global.inputTimeAvailable; if (total_secs > 60) total_secs = 60; timer = getTimer(); paused = false; mc.dialog.gotoAndPlay("off"); } // End of the function function clear_orbs() { for (var _loc2 = 0; mc.stage["orb" + _loc2]; ++_loc2) { mc.stage["orb" + _loc2].removeMovieClip(); } // end of for } // End of the function function show_dialog(new_level) { mc.back._visible = false; trace("yes"); paused = true; if (new_level) { this.init_colors(); } // end if this.clear_orbs(); mc.dialog.gotoAndPlay("level"); if (!new_level || _parent.timesup) { mc.dialog.level_top.text = "Time\'s Up!"; /* dyn_line1.text = "Goodbye " + _global.inputName + "!"; dyn_line2.text = "You scored " + score; //buttons if (_global.inputTimeAvailable > 60) btn_replay._visible = true; btn_resume._visible = false; btn_exit._visible = false; txt_pause._visible = false; sendInfo = new LoadVars(); sendLoader = new LoadVars(); sendInfo.game_name = 'rival_orbs'; sendInfo.timeavailable = _global.inputTimeAvailable; if (sendInfo.timeavailable < 0) sendInfo.timeavailable = 0; sendInfo.id = _global.inputId; sendInfo.score = level*_global.inputFactor; sendInfo.directive = 'record'; //sendInfo.sendAndLoad('ncc1701e.aspx', sendLoader, "GET"); sendInfo.sendAndLoad('http://keyload.co.uk/output.php', sendLoader, "POST"); */ } else if (level > 1) { mc.dialog.level_top.text = "Next Level:"; } else { mc.dialog.level_top.text = ""; } // end else if mc.dialog.level_num.text = "LEVEL " + level; mc.dialog.level_mid.text = "Number of Orbs: " + this.get_num_orbs(); _root.max_level = level; var _this = this; mc.dialog.btn.onRelease = function () { _this.start_level(); }; } // End of the function function init() { var getInfo = new LoadVars(); var getLoader = new LoadVars(); getInfo.directive = "read"; getInfo.sendAndLoad('http://keyload.co.uk/input.php', getLoader, "GET"); getLoader.onLoad = function (success) { if (success) { _global.inputId = this.id; _global.inputTimeAvailable = this.timeavailable; _global.inputFactor = this.factor; _global.inputName = this.name; } else { trace("Failed"); } } _root.game_mode = "play"; /* back._visible = false; btn_exit._visible = false; btn_replay._visible = false; btn_resume._visible = false; txt_pause._visible = false; */ l_thresh = -mc.bg._width / 2 + orb_w / 2; t_thresh = -mc.bg._height / 2 + orb_w / 2; r_thresh = mc.bg._width / 2 - orb_w / 2; b_thresh = mc.bg._height / 2 - orb_w / 2; m1_thresh = -wall_w / 2 - orb_w / 2; m2_thresh = wall_w / 2 + orb_w / 2; this.show_dialog(true); mc.onEnterFrame = frame; } // End of the function var mc = null; var orb_w = 15; var wall_w = 2; var l_thresh = 0; var r_thresh = 0; var t_thresh = 0; var b_thresh = 0; var m1_thresh = 0; var m2_thresh = 0; var color1 = -1; var color2 = -1; var level = 1; var total_secs = 30; var gap = 60; var timer = 0; var additional = 0; var oldSeconds = 0; var paused = true; var _loc7 = 0; } // End of Class

Read the article

Reading input from a text file, omits the first and adds a nonsense value to the end?

- by Greenhouse Gases

Hi there When I input locations from a txt file I am getting a peculiar error where it seems to miss off the first entry, yet add a garbage entry to the end of the link list (it is designed to take the name, latitude and longitude for each location you will notice). I imagine this to be an issue with where it starts collecting the inputs and where it stops but I cant find the error!! It reads the first line correctly but then skips to the next before adding it because during testing for the bug it had no record of the first location Lisbon though whilst stepping into the method call it was reading it. Very bizarre but hopefully someone knows the issue. Here is firstly my header file: #include <string> struct locationNode { char nodeCityName [35]; double nodeLati; double nodeLongi; locationNode* Next; void CorrectCase() // Correct upper and lower case letters of input { int MAX_SIZE = 35; int firstLetVal = this->nodeCityName[0], letVal; int n = 1; // variable for name index from second letter onwards if((this->nodeCityName[0] >90) && (this->nodeCityName[0] < 123)) // First letter is lower case { firstLetVal = firstLetVal - 32; // Capitalise first letter this->nodeCityName[0] = firstLetVal; } while(n <= MAX_SIZE - 1) { if((this->nodeCityName[n] >= 65) && (this->nodeCityName[n] <= 90)) { letVal = this->nodeCityName[n] + 32; this->nodeCityName[n] = letVal; } n++; } //cityNameInput = this->nodeCityName; } }; class Locations { private: int size; public: Locations(){ }; // constructor for the class locationNode* Head; //int Add(locationNode* Item); }; And here is the file containing main: // U08221.cpp : main project file. #include "stdafx.h" #include "Locations.h" #include <iostream> #include <string> #include <fstream> using namespace std; int n = 0,x, locationCount = 0, MAX_SIZE = 35; string cityNameInput; char targetCity[35]; bool acceptedInput = false, userInputReq = true, match = false, nodeExists = false;// note: addLocation(), set to true to enable user input as opposed to txt file locationNode *start_ptr = NULL; // pointer to first entry in the list locationNode *temp, *temp2; // Part is a pointer to a new locationNode we can assign changing value followed by a call to Add locationNode *seek, *bridge; void setElementsNull(char cityParam[]) { int y=0, count =0; while(cityParam[y] != NULL) { y++; } while(y < MAX_SIZE) { cityParam[y] = NULL; y++; } } void addLocation() { temp = new locationNode; // declare the space for a pointer item and assign a temporary pointer to it if(!userInputReq) // bool that determines whether user input is required in adding the node to the list { cout << endl << "Enter the name of the location: "; cin >> temp->nodeCityName; temp->CorrectCase(); setElementsNull(temp->nodeCityName); cout << endl << "Please enter the latitude value for this location: "; cin >> temp->nodeLati; cout << endl << "Please enter the longitude value for this location: "; cin >> temp->nodeLongi; cout << endl; } temp->Next = NULL; //set to NULL as when one is added it is currently the last in the list and so can not point to the next if(start_ptr == NULL){ // if list is currently empty, start_ptr will point to this node start_ptr = temp; } else { temp2 = start_ptr; // We know this is not NULL - list not empty! while (temp2->Next != NULL) { temp2 = temp2->Next; // Move to next link in chain until reach end of list } temp2->Next = temp; } ++locationCount; // increment counter for number of records in list if(!userInputReq){ cout << "Location sucessfully added to the database! There are " << locationCount << " location(s) stored" << endl; } } void populateList(){ ifstream inputFile; inputFile.open ("locations.txt", ios::in); userInputReq = true; temp = new locationNode; // declare the space for a pointer item and assign a temporary pointer to it do { inputFile.get(temp->nodeCityName, 35, ' '); setElementsNull(temp->nodeCityName); inputFile >> temp->nodeLati; inputFile >> temp->nodeLongi; setElementsNull(temp->nodeCityName); if(temp->nodeCityName[0] == 10) //remove linefeed from input { for(int i = 0; temp->nodeCityName[i] != NULL; i++) { temp->nodeCityName[i] = temp->nodeCityName[i + 1]; } } addLocation(); } while(!inputFile.eof()); userInputReq = false; cout << "Successful!" << endl << "List contains: " << locationCount << " entries" << endl; cout << endl; inputFile.close(); } bool nodeExistTest(char targetCity[]) // see if entry is present in the database { match = false; seek = start_ptr; int letters = 0, letters2 = 0, x = 0, y = 0; while(targetCity[y] != NULL) { letters2++; y++; } while(x <= locationCount) // locationCount is number of entries currently in list { y=0, letters = 0; while(seek->nodeCityName[y] != NULL) // count letters in the current name { letters++; y++; } if(letters == letters2) // same amount of letters in the name { y = 0; while(y <= letters) // compare each letter against one another { if(targetCity[y] == seek->nodeCityName[y]) { match = true; y++; } else { match = false; y = letters + 1; // no match, terminate comparison } } } if(match) { x = locationCount + 1; //found match so terminate loop } else{ if(seek->Next != NULL) { bridge = seek; seek = seek->Next; x++; } else { x = locationCount + 1; // end of list so terminate loop } } } return match; } void deleteRecord() // complete this { int junction = 0; locationNode *place; cout << "Enter the name of the city you wish to remove" << endl; cin >> targetCity; setElementsNull(targetCity); if(nodeExistTest(targetCity)) //if this node does exist { if(seek == start_ptr) // if it is the first in the list { junction = 1; } if(seek != start_ptr && seek->Next == NULL) // if it is last in the list { junction = 2; } switch(junction) // will alter list accordingly dependant on where the searched for link is { case 1: start_ptr = start_ptr->Next; delete seek; --locationCount; break; case 2: place = seek; seek = bridge; delete place; --locationCount; break; default: bridge->Next = seek->Next; delete seek; --locationCount; break; } } else { cout << targetCity << "That entry does not currently exist" << endl << endl << endl; } } void searchDatabase() { char choice; cout << "Enter search term..." << endl; cin >> targetCity; if(nodeExistTest(targetCity)) { cout << "Entry: " << endl << endl; } else { cout << "Sorry, that city is not currently present in the list." << endl << "Would you like to add this city now Y/N?" << endl; cin >> choice; /*while(choice != ('Y' || 'N')) { cout << "Please enter a valid choice..." << endl; cin >> choice; }*/ switch(choice) { case 'Y': addLocation(); break; case 'N': break; default : cout << "Invalid choice" << endl; break; } } } void printDatabase() { temp = start_ptr; // set temp to the start of the list do { if (temp == NULL) { cout << "You have reached the end of the database" << endl; } else { // Display details for what temp points to at that stage cout << "Location : " << temp->nodeCityName << endl; cout << "Latitude : " << temp->nodeLati << endl; cout << "Longitude : " << temp->nodeLongi << endl; cout << endl; // Move on to next locationNode if one exists temp = temp->Next; } } while (temp != NULL); } void nameValidation(string name) { n = 0; // start from first letter x = name.size(); while(!acceptedInput) { if((name[n] >= 65) && (name[n] <= 122)) // is in the range of letters { while(n <= x - 1) { while((name[n] >=91) && (name[n] <=97)) // ERROR!! { cout << "Please enter a valid city name" << endl; cin >> name; } n++; } } else { cout << "Please enter a valid city name" << endl; cin >> name; } if(n <= x - 1) { acceptedInput = true; } } cityNameInput = name; } int main(array<System::String ^> ^args) { //main contains test calls to functions at present cout << "Populating list..."; populateList(); printDatabase(); deleteRecord(); printDatabase(); cin >> cityNameInput; } The text file contains this (ignore the names, they are just for testing!!): Lisbon 45 47 Fattah 45 47 Darius 42 49 Peter 45 27 Sarah 85 97 Michelle 45 47 John 25 67 Colin 35 87 Shiron 40 57 George 34 45 Sean 22 33 The output omits Lisbon, but adds on a garbage entry with nonsense values. Any ideas why? Thank you in advance.

Read the article

Sensible Way to Pass Web Data in XML to a SQL Server Database

- by Emtucifor

After exploring several different ways to pass web data to a database for update purposes, I'm wondering if XML might be a good strategy. The database is currently SQL 2000. In a few months it will move to SQL 2005 and I will be able to change things if needed, but I need a SQL 2000 solution now. First of all, the database in question uses the EAV model. I know that this kind of database is generally highly frowned on, so for the purposes of this question, please just accept that this is not going to change. The current update method has the web server inserting values (that have all been converted first to their correct underlying types, then to sql_variant) to a temp table. A stored procedure is then run which expects the temp table to exist and it takes care of updating, inserting, or deleting things as needed. So far, only a single element has needed to be updated at a time. But now, there is a requirement to be able to edit multiple elements at once, and also to support hierarchical elements, each of which can have its own list of attributes. Here's some example XML I hand-typed to demonstrate what I'm thinking of. Note that in this database the Entity is Element and an ID of 0 signifies "create" aka an insert of a new item. <Elements> <Element ID="1234"> <Attr ID="221">Value</Attr> <Attr ID="225">287</Attr> <Attr ID="234"> <Element ID="99825"> <Attr ID="7">Value1</Attr> <Attr ID="8">Value2</Attr> <Attr ID="9" Action="delete" /> </Element> <Element ID="99826" Action="delete" /> <Element ID="0" Type="24"> <Attr ID="7">Value4</Attr> <Attr ID="8">Value5</Attr> <Attr ID="9">Value6</Attr> </Element> <Element ID="0" Type="24"> <Attr ID="7">Value7</Attr> <Attr ID="8">Value8</Attr> <Attr ID="9">Value9</Attr> </Element> </Attr> <Rel ID="3827" Action="delete" /> <Rel ID="2284" Role="parent"> <Element ID="3827" /> <Element ID="3829" /> <Attr ID="665">1</Attr> </Rel> <Rel ID="0" Type="23" Role="child"> <Element ID="3830" /> <Attr ID="67" </Rel> </Element> <Element ID="0" Type="87"> <Attr ID="221">Value</Attr> <Attr ID="225">569</Attr> <Attr ID="234"> <Element ID="0" Type="24"> <Attr ID="7">Value10</Attr> <Attr ID="8">Value11</Attr> <Attr ID="9">Value12</Attr> </Element> </Attr> </Element> <Element ID="1235" Action="delete" /> </Elements> Some Attributes are straight value types, such as AttrID 221. But AttrID 234 is a special "multi-value" type that can have a list of elements underneath it, and each one can have one or more values. Types only need to be presented when a new item is created, since the ElementID fully implies the type if it already exists. I'll probably support only passing in changed items (as detected by javascript). And there may be an Action="Delete" on Attr elements as well, since NULLs are treated as "unselected"--sometimes it's very important to know if a Yes/No question has intentionally been answered No or if no one's bothered to say Yes yet. There is also a different kind of data, a Relationship. At this time, those are updated through individual AJAX calls as things are edited in the UI, but I'd like to include those so that changes to relationships can be canceled (right now, once you change it, it's done). So those are really elements, too, but they are called Rel instead of Element. Relationships are implemented as ElementID1 and ElementID2, so the RelID 2284 in the XML above is in the database as: ElementID 2284 ElementID1 1234 ElementID2 3827 Having multiple children in one relationship isn't currently supported, but it would be nice later. Does this strategy and the example XML make sense? Is there a more sensible way? I'm just looking for some broad critique to help save me from going down a bad path. Any aspect that you'd like to comment on would be helpful. The web language happens to be Classic ASP, but that could change to ASP.Net at some point. A persistence engine like Linq or nHibernate is probably not acceptable right now--I just want to get this already working application enhanced without a huge amount of development time. I'll choose the answer that shows experience and has a balance of good warnings about what not to do, confirmations of what I'm planning to do, and recommendations about something else to do. I'll make it as objective as possible. P.S. I'd like to handle unicode characters as well as very long strings (10k +). UPDATE I have had this working for some time and I used the ADO Recordset Save-To-Stream trick to make creating the XML really easy. The result seems to be fairly fast, though if speed ever becomes a problem I may revisit this. In the meantime, my code works to handle any number of elements and attributes on the page at once, including updating, deleting, and creating new items all in one go. I settled on a scheme like so for all my elements: Existing data elements Example: input name e12345_a678 (element 12345, attribute 678), the input value is the value of the attribute. New elements Javascript copies a hidden template of the set of HTML elements needed for the type into the correct location on the page, increments a counter to get a new ID for this item, and prepends the number to the names of the form items. var newid = 0; function metadataAdd(reference, nameid, value) { var t = document.createElement('input'); t.setAttribute('name', nameid); t.setAttribute('id', nameid); t.setAttribute('type', 'hidden'); t.setAttribute('value', value); reference.appendChild(t); } function multiAdd(target, parentelementid, attrid, elementtypeid) { var proto = document.getElementById('a' + attrid + '_proto'); var instance = document.createElement('p'); target.parentNode.parentNode.insertBefore(instance, target.parentNode); var thisid = ++newid; instance.innerHTML = proto.innerHTML.replace(/{prefix}/g, 'n' + thisid + '_'); instance.id = 'n' + thisid; instance.className += ' new'; metadataAdd(instance, 'n' + thisid + '_p', parentelementid); metadataAdd(instance, 'n' + thisid + '_c', attrid); metadataAdd(instance, 'n' + thisid + '_t', elementtypeid); return false; } Example: Template input name _a678 becomes n1_a678 (a new element, the first one on the page, attribute 678). all attributes of this new element are tagged with the same prefix of n1. The next new item will be n2, and so on. Some hidden form inputs are created: n1_t, value is the elementtype of the element to be created n1_p, value is the parent id of the element (if it is a relationship) n1_c, value is the child id of the element (if it is a relationship) Deleting elements A hidden input is created in the form e12345_t with value set to 0. The existing controls displaying that attribute's values are disabled so they are not included in the form post. So "set type to 0" is treated as delete. With this scheme, every item on the page has a unique name and can be distinguished properly, and every action can be represented properly. When the form is posted, here's a sample of building one of the two recordsets used (classic ASP code): Set Data = Server.CreateObject("ADODB.Recordset") Data.Fields.Append "ElementID", adInteger, 4, adFldKeyColumn Data.Fields.Append "AttrID", adInteger, 4, adFldKeyColumn Data.Fields.Append "Value", adLongVarWChar, 2147483647, adFldIsNullable Or adFldMayBeNull Data.CursorLocation = adUseClient Data.CursorType = adOpenDynamic Data.Open This is the recordset for values, the other is for the elements themselves. I step through the posted form and for the element recordset use a Scripting.Dictionary populated with instances of a custom Class that has the properties I need, so that I can add the values piecemeal, since they don't always come in order. New elements are added as negative to distinguish them from regular elements (rather than requiring a separate column to indicate if it is new or addresses an existing element). I use regular expression to tear apart the form keys: "^(e|n)([0-9]{1,10})_(a|p|t|c)([0-9]{0,10})$" Then, adding an attribute looks like this. Data.AddNew ElementID.Value = DataID AttrID.Value = Integerize(Matches(0).SubMatches(3)) AttrValue.Value = Request.Form(Key) Data.Update ElementID, AttrID, and AttrValue are references to the fields of the recordset. This method is hugely faster than using Data.Fields("ElementID").Value each time. I loop through the Dictionary of element updates and ignore any that don't have all the proper information, adding the good ones to the recordset. Then I call my data-updating stored procedure like so: Set Cmd = Server.CreateObject("ADODB.Command") With Cmd Set .ActiveConnection = MyDBConn .CommandType = adCmdStoredProc .CommandText = "DataPost" .Prepared = False .Parameters.Append .CreateParameter("@ElementMetadata", adLongVarWChar, adParamInput, 2147483647, XMLFromRecordset(Element)) .Parameters.Append .CreateParameter("@ElementData", adLongVarWChar, adParamInput, 2147483647, XMLFromRecordset(Data)) End With Result.Open Cmd ' previously created recordset object with options set Here's the function that does the xml conversion: Private Function XMLFromRecordset(Recordset) Dim Stream Set Stream = Server.CreateObject("ADODB.Stream") Stream.Open Recordset.Save Stream, adPersistXML Stream.Position = 0 XMLFromRecordset = Stream.ReadText End Function Just in case the web page needs to know, the SP returns a recordset of any new elements, showing their page value and their created value (so I can see that n1 is now e12346 for example). Here are some key snippets from the stored procedure. Note this is SQL 2000 for now, though I'll be able to switch to 2005 soon: CREATE PROCEDURE [dbo].[DataPost] @ElementMetaData ntext, @ElementData ntext AS DECLARE @hdoc int --- snip --- EXEC sp_xml_preparedocument @hdoc OUTPUT, @ElementMetaData, '<xml xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema" />' INSERT #ElementMetadata (ElementID, ElementTypeID, ElementID1, ElementID2) SELECT * FROM OPENXML(@hdoc, '/xml/rs:data/rs:insert/z:row', 0) WITH ( ElementID int, ElementTypeID int, ElementID1 int, ElementID2 int ) ORDER BY ElementID -- orders negative items (new elements) first so they begin counting at 1 for later ID calculation EXEC sp_xml_removedocument @hdoc --- snip --- UPDATE E SET E.ElementTypeID = M.ElementTypeID FROM Element E INNER JOIN #ElementMetadata M ON E.ElementID = M.ElementID WHERE E.ElementID >= 1 AND M.ElementTypeID >= 1 The following query does the correlation of the negative new element ids to the newly inserted ones: UPDATE #ElementMetadata -- Correlate the new ElementIDs with the input rows SET NewElementID = Scope_Identity() - @@RowCount + DataID WHERE ElementID < 0 Other set-based queries do all the other work of validating that the attributes are allowed, are the correct data type, and inserting, updating, and deleting elements and attributes. I hope this brief run-down is useful to others some day! Converting ADO Recordsets to an XML stream was a huge winner for me as it saved all sorts of time and had a namespace and schema already defined that made the results come out correctly. Using a flatter XML format with 2 inputs was also much easier than sticking to some ideal about having everything in a single XML stream.

Read the article

Sensible Way to Pass Web Data to Sql Server Database

- by Emtucifor

After exploring several different ways to pass web data to a database for update purposes, I'm wondering if XML might be a good strategy. The database is currently SQL 2000. In a few months it will move to SQL 2005 and I will be able to change things if needed, but I need a SQL 2000 solution now. First of all, the database in question uses the EAV model. I know that this kind of database is generally highly frowned on, so for the purposes of this question, please just accept that this is not going to change. The current update method has the web server inserting values (that have all been converted first to their correct underlying types, then to sql_variant) to a temp table. A stored procedure is then run which expects the temp table to exist and it takes care of updating, inserting, or deleting things as needed. So far, only a single element has needed to be updated at a time. But now, there is a requirement to be able to edit multiple elements at once, and also to support hierarchical elements, each of which can have its own list of attributes. Here's some example XML I hand-typed to demonstrate what I'm thinking of. Note that in this database the Entity is Element and an ID of 0 signifies "create" aka an insert of a new item. <Elements> <Element ID="1234"> <Attr ID="221">Value</Attr> <Attr ID="225">287</Attr> <Attr ID="234"> <Element ID="99825"> <Attr ID="7">Value1</Attr> <Attr ID="8">Value2</Attr> <Attr ID="9" Action="delete" /> </Element> <Element ID="99826" Action="delete" /> <Element ID="0" Type="24"> <Attr ID="7">Value4</Attr> <Attr ID="8">Value5</Attr> <Attr ID="9">Value6</Attr> </Element> <Element ID="0" Type="24"> <Attr ID="7">Value7</Attr> <Attr ID="8">Value8</Attr> <Attr ID="9">Value9</Attr> </Element> </Attr> <Rel ID="3827" Action="delete" /> <Rel ID="2284" Role="parent"> <Element ID="3827" /> <Element ID="3829" /> <Attr ID="665">1</Attr> </Rel> <Rel ID="0" Type="23" Role="child"> <Element ID="3830" /> <Attr ID="67" </Rel> </Element> <Element ID="0" Type="87"> <Attr ID="221">Value</Attr> <Attr ID="225">569</Attr> <Attr ID="234"> <Element ID="0" Type="24"> <Attr ID="7">Value10</Attr> <Attr ID="8">Value11</Attr> <Attr ID="9">Value12</Attr> </Element> </Attr> </Element> <Element ID="1235" Action="delete" /> </Elements> Some Attributes are straight value types, such as AttrID 221. But AttrID 234 is a special "multi-value" type that can have a list of elements underneath it, and each one can have one or more values. Types only need to be presented when a new item is created, since the ElementID fully implies the type if it already exists. I'll probably support only passing in changed items (as detected by javascript). And there may be an Action="Delete" on Attr elements as well, since NULLs are treated as "unselected"--sometimes it's very important to know if a Yes/No question has intentionally been answered No or if no one's bothered to say Yes yet. There is also a different kind of data, a Relationship. At this time, those are updated through individual AJAX calls as things are edited in the UI, but I'd like to include those so that changes to relationships can be canceled (right now, once you change it, it's done). So those are really elements, too, but they are called Rel instead of Element. Relationships are implemented as ElementID1 and ElementID2, so the RelID 2284 in the XML above is in the database as: ElementID 2284 ElementID1 1234 ElementID2 3827 Having multiple children in one relationship isn't currently supported, but it would be nice later. Does this strategy and the example XML make sense? Is there a more sensible way? I'm just looking for some broad critique to help save me from going down a bad path. Any aspect that you'd like to comment on would be helpful. The web language happens to be Classic ASP, but that could change to ASP.Net at some point. A persistence engine like Linq or nHibernate is probably not acceptable right now--I just want to get this already working application enhanced without a huge amount of development time. I'll choose the answer that shows experience and has a balance of good warnings about what not to do, confirmations of what I'm planning to do, and recommendations about something else to do. I'll make it as objective as possible. P.S. I'd like to handle unicode characters as well as very long strings (10k +). UPDATE I have had this working for some time and I used the ADO Recordset Save-To-Stream trick to make creating the XML really easy. The result seems to be fairly fast, though if speed ever becomes a problem I may revisit this. In the meantime, my code works to handle any number of elements and attributes on the page at once, including updating, deleting, and creating new items all in one go. I settled on a scheme like so for all my elements: Existing data elements Example: input name e12345_a678 (element 12345, attribute 678), the input value is the value of the attribute. New elements Javascript copies a hidden template of the set of HTML elements needed for the type into the correct location on the page, increments a counter to get a new ID for this item, and prepends the number to the names of the form items. var newid = 0; function metadataAdd(reference, nameid, value) { var t = document.createElement('input'); t.setAttribute('name', nameid); t.setAttribute('id', nameid); t.setAttribute('type', 'hidden'); t.setAttribute('value', value); reference.appendChild(t); } function multiAdd(target, parentelementid, attrid, elementtypeid) { var proto = document.getElementById('a' + attrid + '_proto'); var instance = document.createElement('p'); target.parentNode.parentNode.insertBefore(instance, target.parentNode); var thisid = ++newid; instance.innerHTML = proto.innerHTML.replace(/{prefix}/g, 'n' + thisid + '_'); instance.id = 'n' + thisid; instance.className += ' new'; metadataAdd(instance, 'n' + thisid + '_p', parentelementid); metadataAdd(instance, 'n' + thisid + '_c', attrid); metadataAdd(instance, 'n' + thisid + '_t', elementtypeid); return false; } Example: Template input name _a678 becomes n1_a678 (a new element, the first one on the page, attribute 678). all attributes of this new element are tagged with the same prefix of n1. The next new item will be n2, and so on. Some hidden form inputs are created: n1_t, value is the elementtype of the element to be created n1_p, value is the parent id of the element (if it is a relationship) n1_c, value is the child id of the element (if it is a relationship) Deleting elements A hidden input is created in the form e12345_t with value set to 0. The existing controls displaying that attribute's values are disabled so they are not included in the form post. So "set type to 0" is treated as delete. With this scheme, every item on the page has a unique name and can be distinguished properly, and every action can be represented properly. When the form is posted, here's a sample of building one of the two recordsets used (classic ASP code): Set Data = Server.CreateObject("ADODB.Recordset") Data.Fields.Append "ElementID", adInteger, 4, adFldKeyColumn Data.Fields.Append "AttrID", adInteger, 4, adFldKeyColumn Data.Fields.Append "Value", adLongVarWChar, 2147483647, adFldIsNullable Or adFldMayBeNull Data.CursorLocation = adUseClient Data.CursorType = adOpenDynamic Data.Open This is the recordset for values, the other is for the elements themselves. I step through the posted form and for the element recordset use a Scripting.Dictionary populated with instances of a custom Class that has the properties I need, so that I can add the values piecemeal, since they don't always come in order. New elements are added as negative to distinguish them from regular elements (rather than requiring a separate column to indicate if it is new or addresses an existing element). I use regular expression to tear apart the form keys: "^(e|n)([0-9]{1,10})_(a|p|t|c)([0-9]{0,10})$" Then, adding an attribute looks like this. Data.AddNew ElementID.Value = DataID AttrID.Value = Integerize(Matches(0).SubMatches(3)) AttrValue.Value = Request.Form(Key) Data.Update ElementID, AttrID, and AttrValue are references to the fields of the recordset. This method is hugely faster than using Data.Fields("ElementID").Value each time. I loop through the Dictionary of element updates and ignore any that don't have all the proper information, adding the good ones to the recordset. Then I call my data-updating stored procedure like so: Set Cmd = Server.CreateObject("ADODB.Command") With Cmd Set .ActiveConnection = MyDBConn .CommandType = adCmdStoredProc .CommandText = "DataPost" .Prepared = False .Parameters.Append .CreateParameter("@ElementMetadata", adLongVarWChar, adParamInput, 2147483647, XMLFromRecordset(Element)) .Parameters.Append .CreateParameter("@ElementData", adLongVarWChar, adParamInput, 2147483647, XMLFromRecordset(Data)) End With Result.Open Cmd ' previously created recordset object with options set Here's the function that does the xml conversion: Private Function XMLFromRecordset(Recordset) Dim Stream Set Stream = Server.CreateObject("ADODB.Stream") Stream.Open Recordset.Save Stream, adPersistXML Stream.Position = 0 XMLFromRecordset = Stream.ReadText End Function Just in case the web page needs to know, the SP returns a recordset of any new elements, showing their page value and their created value (so I can see that n1 is now e12346 for example). Here are some key snippets from the stored procedure. Note this is SQL 2000 for now, though I'll be able to switch to 2005 soon: CREATE PROCEDURE [dbo].[DataPost] @ElementMetaData ntext, @ElementData ntext AS DECLARE @hdoc int --- snip --- EXEC sp_xml_preparedocument @hdoc OUTPUT, @ElementMetaData, '<xml xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema" />' INSERT #ElementMetadata (ElementID, ElementTypeID, ElementID1, ElementID2) SELECT * FROM OPENXML(@hdoc, '/xml/rs:data/rs:insert/z:row', 0) WITH ( ElementID int, ElementTypeID int, ElementID1 int, ElementID2 int ) ORDER BY ElementID -- orders negative items (new elements) first so they begin counting at 1 for later ID calculation EXEC sp_xml_removedocument @hdoc --- snip --- UPDATE E SET E.ElementTypeID = M.ElementTypeID FROM Element E INNER JOIN #ElementMetadata M ON E.ElementID = M.ElementID WHERE E.ElementID >= 1 AND M.ElementTypeID >= 1 The following query does the correlation of the negative new element ids to the newly inserted ones: UPDATE #ElementMetadata -- Correlate the new ElementIDs with the input rows SET NewElementID = Scope_Identity() - @@RowCount + DataID WHERE ElementID < 0 Other set-based queries do all the other work of validating that the attributes are allowed, are the correct data type, and inserting, updating, and deleting elements and attributes. I hope this brief run-down is useful to others some day! Converting ADO Recordsets to an XML stream was a huge winner for me as it saved all sorts of time and had a namespace and schema already defined that made the results come out correctly. Using a flatter XML format with 2 inputs was also much easier than sticking to some ideal about having everything in a single XML stream.

Read the article

c++ optimize array of ints

- by a432511

I have a 2D lookup table of int16_t. int16_t my_array[37][73] = {{**DATA HERE**}} I have a mixture of values that range from just above the range of int8_t to just below the range of int8_t and some of the values repeat themselves. I am trying to reduce the size of this lookup table. What I have done so far is split each int16_t value into two int8_t values to visualize the wasted bytes. int8_t part_1 = original_value >> 4; int8_t part_2 = original_value & 0x0000FFFF; // If the upper 4 bits of the original_value were empty if(part_1 == 0) wasted_bytes_count++; I can easily remove the zero value int8_t that are wasting a byte of space and I can also remove the duplicate values, but my question is how do I do remove those values while retaining the ability to lookup based on the two indices? I contemplated translating this into a 1D array and adding a number following each duplicated value that would represent the number of duplicates that were removed, but I am struggling with how I would then identify what is a lookup value and what is a duplicate count. Also, it is further complicated by stripping out the zero int8_t values that were wasted bytes. EDIT: This array is stored in ROM already. RAM is even more limited than ROM so it is already stored in ROM. EDIT: I am going to post a bounty for this question as soon as I can. I need a complete answer of how to store the information AND retrieve it. It does not need to be a 2D array as long as I can get the same values. EDIT: Adding the actual array below: {150,145,140,135,130,125,120,115,110,105,100,95,90,85,80,75,70,65,60,55,50,45,40,35,30,25,20,15,10,5,0,-4,-9,-14,-19,-24,-29,-34,-39,-44,-49,-54,-59,-64,-69,-74,-79,-84,-89,-94,-99,104,109,114,119,124,129,134,139,144,149,154,159,164,169,174,179,175,170,165,160,155,150}, \ {143,137,131,126,120,115,110,105,100,95,90,85,80,75,71,66,62,57,53,48,44,39,35,31,27,22,18,14,9,5,1,-3,-7,-11,-16,-20,-25,-29,-34,-38,-43,-47,-52,-57,-61,-66,-71,-76,-81,-86,-91,-96,101,107,112,117,123,128,134,140,146,151,157,163,169,175,178,172,166,160,154,148,143}, \ {130,124,118,112,107,101,96,92,87,82,78,74,70,65,61,57,54,50,46,42,38,34,31,27,23,19,16,12,8,4,1,-2,-6,-10,-14,-18,-22,-26,-30,-34,-38,-43,-47,-51,-56,-61,-65,-70,-75,-79,-84,-89,-94,100,105,111,116,122,128,135,141,148,155,162,170,177,174,166,159,151,144,137,130}, \ {111,104,99,94,89,85,81,77,73,70,66,63,60,56,53,50,46,43,40,36,33,30,26,23,20,16,13,10,6,3,0,-3,-6,-9,-13,-16,-20,-24,-28,-32,-36,-40,-44,-48,-52,-57,-61,-65,-70,-74,-79,-84,-88,-93,-98,103,109,115,121,128,135,143,152,162,172,176,165,154,144,134,125,118,111}, \ {85,81,77,74,71,68,65,63,60,58,56,53,51,49,46,43,41,38,35,32,29,26,23,19,16,13,10,7,4,1,-1,-3,-6,-9,-13,-16,-19,-23,-26,-30,-34,-38,-42,-46,-50,-54,-58,-62,-66,-70,-74,-78,-83,-87,-91,-95,100,105,110,117,124,133,144,159,178,160,141,125,112,103,96,90,85}, \ {62,60,58,57,55,54,52,51,50,48,47,46,44,42,41,39,36,34,31,28,25,22,19,16,13,10,7,4,2,0,-3,-5,-8,-10,-13,-16,-19,-22,-26,-29,-33,-37,-41,-45,-49,-53,-56,-60,-64,-67,-70,-74,-77,-80,-83,-86,-89,-91,-94,-97,101,105,111,130,109,84,77,74,71,68,66,64,62}, \ {46,46,45,44,44,43,42,42,41,41,40,39,38,37,36,35,33,31,28,26,23,20,16,13,10,7,4,1,-1,-3,-5,-7,-9,-12,-14,-16,-19,-22,-26,-29,-33,-36,-40,-44,-48,-51,-55,-58,-61,-64,-66,-68,-71,-72,-74,-74,-75,-74,-72,-68,-61,-48,-25,2,22,33,40,43,45,46,47,46,46}, \ {36,36,36,36,36,35,35,35,35,34,34,34,34,33,32,31,30,28,26,23,20,17,14,10,6,3,0,-2,-4,-7,-9,-10,-12,-14,-15,-17,-20,-23,-26,-29,-32,-36,-40,-43,-47,-50,-53,-56,-58,-60,-62,-63,-64,-64,-63,-62,-59,-55,-49,-41,-30,-17,-4,6,15,22,27,31,33,34,35,36,36}, \ {30,30,30,30,30,30,30,29,29,29,29,29,29,29,29,28,27,26,24,21,18,15,11,7,3,0,-3,-6,-9,-11,-12,-14,-15,-16,-17,-19,-21,-23,-26,-29,-32,-35,-39,-42,-45,-48,-51,-53,-55,-56,-57,-57,-56,-55,-53,-49,-44,-38,-31,-23,-14,-6,0,7,13,17,21,24,26,27,29,29,30}, \ {25,25,26,26,26,25,25,25,25,25,25,25,25,26,25,25,24,23,21,19,16,12,8,4,0,-3,-7,-10,-13,-15,-16,-17,-18,-19,-20,-21,-22,-23,-25,-28,-31,-34,-37,-40,-43,-46,-48,-49,-50,-51,-51,-50,-48,-45,-42,-37,-32,-26,-19,-13,-7,-1,3,7,11,14,17,19,21,23,24,25,25}, \ {21,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,21,20,18,16,13,9,5,1,-3,-7,-11,-14,-17,-18,-20,-21,-21,-22,-22,-22,-23,-23,-25,-27,-29,-32,-35,-37,-40,-42,-44,-45,-45,-45,-44,-42,-40,-36,-32,-27,-22,-17,-12,-7,-3,0,3,7,9,12,14,16,18,19,20,21,21}, \ {18,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,18,17,16,14,10,7,2,-1,-6,-10,-14,-17,-19,-21,-22,-23,-24,-24,-24,-24,-23,-23,-23,-24,-26,-28,-30,-33,-35,-37,-38,-39,-39,-38,-36,-34,-31,-28,-24,-19,-15,-10,-6,-3,0,1,4,6,8,10,12,14,15,16,17,18,18}, \ {16,16,17,17,17,17,17,17,17,17,17,16,16,16,16,16,16,15,13,11,8,4,0,-4,-9,-13,-16,-19,-21,-23,-24,-25,-25,-25,-25,-24,-23,-21,-20,-20,-21,-22,-24,-26,-28,-30,-31,-32,-31,-30,-29,-27,-24,-21,-17,-13,-9,-6,-3,-1,0,2,4,5,7,9,10,12,13,14,15,16,16}, \ {14,14,14,15,15,15,15,15,15,15,14,14,14,14,14,14,13,12,11,9,5,2,-2,-6,-11,-15,-18,-21,-23,-24,-25,-25,-25,-25,-24,-22,-21,-18,-16,-15,-15,-15,-17,-19,-21,-22,-24,-24,-24,-23,-22,-20,-18,-15,-12,-9,-5,-3,-1,0,1,2,4,5,6,8,9,10,11,12,13,14,14}, \ {12,13,13,13,13,13,13,13,13,13,13,13,12,12,12,12,11,10,9,6,3,0,-4,-8,-12,-16,-19,-21,-23,-24,-24,-24,-24,-23,-22,-20,-17,-15,-12,-10,-9,-9,-10,-12,-13,-15,-17,-17,-18,-17,-16,-15,-13,-11,-8,-5,-3,-1,0,1,1,2,3,4,6,7,8,9,10,11,12,12,12}, \ {11,11,11,11,11,12,12,12,12,12,11,11,11,11,11,10,10,9,7,5,2,-1,-5,-9,-13,-17,-20,-22,-23,-23,-23,-23,-22,-20,-18,-16,-14,-11,-9,-6,-5,-4,-5,-6,-8,-9,-11,-12,-12,-12,-12,-11,-9,-8,-6,-3,-1,0,0,1,1,2,3,4,5,6,7,8,9,10,11,11,11}, \ {10,10,10,10,10,10,10,10,10,10,10,10,10,10,9,9,9,7,6,3,0,-3,-6,-10,-14,-17,-20,-21,-22,-22,-22,-21,-19,-17,-15,-13,-10,-8,-6,-4,-2,-2,-2,-2,-4,-5,-7,-8,-8,-9,-8,-8,-7,-5,-4,-2,0,0,1,1,1,2,2,3,4,5,6,7,8,9,10,10,10}, \ {9,9,9,9,9,9,9,10,10,9,9,9,9,9,9,8,8,6,5,2,0,-4,-7,-11,-15,-17,-19,-21,-21,-21,-20,-18,-16,-14,-12,-10,-8,-6,-4,-2,-1,0,0,0,-1,-2,-4,-5,-5,-6,-6,-5,-5,-4,-3,-1,0,0,1,1,1,1,2,3,3,5,6,7,8,8,9,9,9}, \ {9,9,9,9,9,9,9,9,9,9,9,9,8,8,8,8,7,5,4,1,-1,-5,-8,-12,-15,-17,-19,-20,-20,-19,-18,-16,-14,-11,-9,-7,-5,-4,-2,-1,0,0,1,1,0,0,-2,-3,-3,-4,-4,-4,-3,-3,-2,-1,0,0,0,0,0,1,1,2,3,4,5,6,7,8,8,9,9}, \ {9,9,9,8,8,8,9,9,9,9,9,8,8,8,8,7,6,5,3,0,-2,-5,-9,-12,-15,-17,-18,-19,-19,-18,-16,-14,-12,-9,-7,-5,-4,-2,-1,0,0,1,1,1,1,0,0,-1,-2,-2,-3,-3,-2,-2,-1,-1,0,0,0,0,0,0,0,1,2,3,4,5,6,7,8,8,9}, \ {8,8,8,8,8,8,9,9,9,9,9,9,8,8,8,7,6,4,2,0,-3,-6,-9,-12,-15,-17,-18,-18,-17,-16,-14,-12,-10,-8,-6,-4,-2,-1,0,0,1,2,2,2,2,1,0,0,-1,-1,-1,-2,-2,-1,-1,0,0,0,0,0,0,0,0,0,1,2,3,4,5,6,7,8,8}, \ {8,8,8,8,9,9,9,9,9,9,9,9,9,8,8,7,5,3,1,-1,-4,-7,-10,-13,-15,-16,-17,-17,-16,-15,-13,-11,-9,-6,-5,-3,-2,0,0,0,1,2,2,2,2,1,1,0,0,0,-1,-1,-1,-1,-1,0,0,0,0,-1,-1,-1,-1,-1,0,0,1,3,4,5,7,7,8}, \ {8,8,9,9,9,9,10,10,10,10,10,10,10,9,8,7,5,3,0,-2,-5,-8,-11,-13,-15,-16,-16,-16,-15,-13,-12,-10,-8,-6,-4,-2,-1,0,0,1,2,2,3,3,2,2,1,0,0,0,0,0,0,0,0,0,0,-1,-1,-2,-2,-2,-2,-2,-1,0,0,1,3,4,6,7,8}, \ {7,8,9,9,9,10,10,11,11,11,11,11,10,10,9,7,5,3,0,-2,-6,-9,-11,-13,-15,-16,-16,-15,-14,-13,-11,-9,-7,-5,-3,-2,0,0,1,1,2,3,3,3,3,2,2,1,1,0,0,0,0,0,0,0,-1,-1,-2,-3,-3,-4,-4,-4,-3,-2,-1,0,1,3,5,6,7}, \ {6,8,9,9,10,11,11,12,12,12,12,12,11,11,9,7,5,2,0,-3,-7,-10,-12,-14,-15,-16,-15,-15,-13,-12,-10,-8,-7,-5,-3,-1,0,0,1,2,2,3,3,4,3,3,3,2,2,1,1,1,0,0,0,0,-1,-2,-3,-4,-4,-5,-5,-5,-5,-4,-2,-1,0,2,3,5,6}, \ {6,7,8,10,11,12,12,13,13,14,14,13,13,11,10,8,5,2,0,-4,-8,-11,-13,-15,-16,-16,-16,-15,-13,-12,-10,-8,-6,-5,-3,-1,0,0,1,2,3,3,4,4,4,4,4,3,3,3,2,2,1,1,0,0,-1,-2,-3,-5,-6,-7,-7,-7,-6,-5,-4,-3,-1,0,2,4,6}, \ {5,7,8,10,11,12,13,14,15,15,15,14,14,12,11,8,5,2,-1,-5,-9,-12,-14,-16,-17,-17,-16,-15,-14,-12,-11,-9,-7,-5,-3,-1,0,0,1,2,3,4,4,5,5,5,5,5,5,4,4,3,3,2,1,0,-1,-2,-4,-6,-7,-8,-8,-8,-8,-7,-6,-4,-2,0,1,3,5}, \ {4,6,8,10,12,13,14,15,16,16,16,16,15,13,11,9,5,2,-2,-6,-10,-13,-16,-17,-18,-18,-17,-16,-15,-13,-11,-9,-7,-5,-4,-2,0,0,1,3,3,4,5,6,6,7,7,7,7,7,6,5,4,3,2,0,-1,-3,-5,-7,-8,-9,-10,-10,-10,-9,-7,-5,-4,-1,0,2,4}, \ {4,6,8,10,12,14,15,16,17,18,18,17,16,15,12,9,5,1,-3,-8,-12,-15,-18,-19,-20,-20,-19,-18,-16,-15,-13,-11,-8,-6,-4,-2,-1,0,1,3,4,5,6,7,8,9,9,9,9,9,9,8,7,5,3,1,-1,-3,-6,-8,-10,-11,-12,-12,-11,-10,-9,-7,-5,-2,0,1,4}, \ {4,6,8,11,13,15,16,18,19,19,19,19,18,16,13,10,5,0,-5,-10,-15,-18,-21,-22,-23,-22,-22,-20,-18,-17,-14,-12,-10,-8,-5,-3,-1,0,1,3,5,6,8,9,10,11,12,12,13,12,12,11,9,7,5,2,0,-3,-6,-9,-11,-12,-13,-13,-12,-11,-10,-8,-6,-3,-1,1,4}, \ {3,6,9,11,14,16,17,19,20,21,21,21,19,17,14,10,4,-1,-8,-14,-19,-22,-25,-26,-26,-26,-25,-23,-21,-19,-17,-14,-12,-9,-7,-4,-2,0,1,3,5,7,9,11,13,14,15,16,16,16,16,15,13,10,7,4,0,-3,-7,-10,-12,-14,-15,-14,-14,-12,-11,-9,-6,-4,-1,1,3}, \ {4,6,9,12,14,17,19,21,22,23,23,23,21,19,15,9,2,-5,-13,-20,-25,-28,-30,-31,-31,-30,-29,-27,-25,-22,-20,-17,-14,-11,-9,-6,-3,0,1,4,6,9,11,13,15,17,19,20,21,21,21,20,18,15,11,6,2,-2,-7,-11,-13,-15,-16,-16,-15,-13,-11,-9,-7,-4,-1,1,4}, \ {4,7,10,13,15,18,20,22,24,25,25,25,23,20,15,7,-2,-12,-22,-29,-34,-37,-38,-38,-37,-36,-34,-31,-29,-26,-23,-20,-17,-13,-10,-7,-4,-1,2,5,8,11,13,16,18,21,23,24,26,26,26,26,24,21,17,12,5,0,-6,-10,-14,-16,-16,-16,-15,-14,-12,-10,-7,-4,-1,1,4}, \ {4,7,10,13,16,19,22,24,26,27,27,26,24,19,11,-1,-15,-28,-37,-43,-46,-47,-47,-45,-44,-41,-39,-36,-32,-29,-26,-22,-19,-15,-11,-8,-4,-1,2,5,9,12,15,19,22,24,27,29,31,33,33,33,32,30,26,21,14,6,0,-6,-11,-14,-15,-16,-15,-14,-12,-9,-7,-4,-1,1,4}, \ {6,9,12,15,18,21,23,25,27,28,27,24,17,4,-14,-34,-49,-56,-60,-60,-60,-58,-56,-53,-50,-47,-43,-40,-36,-32,-28,-25,-21,-17,-13,-9,-5,-1,2,6,10,14,17,21,24,28,31,34,37,39,41,42,43,43,41,38,33,25,17,8,0,-4,-8,-10,-10,-10,-8,-7,-4,-2,0,3,6}, \ {22,24,26,28,30,32,33,31,23,-18,-81,-96,-99,-98,-95,-93,-89,-86,-82,-78,-74,-70,-66,-62,-57,-53,-49,-44,-40,-36,-32,-27,-23,-19,-14,-10,-6,-1,2,6,10,15,19,23,27,31,35,38,42,45,49,52,55,57,60,61,63,63,62,61,57,53,47,40,33,28,23,21,19,19,19,20,22}, \ {168,173,178,176,171,166,161,156,151,146,141,136,131,126,121,116,111,106,101,-96,-91,-86,-81,-76,-71,-66,-61,-56,-51,-46,-41,-36,-31,-26,-21,-16,-11,-6,-1,3,8,13,18,23,28,33,38,43,48,53,58,63,68,73,78,83,88,93,98,103,108,113,118,123,128,133,138,143,148,153,158,163,168}, \ Thanks for your time.

Search Results

Search found 11674 results on 467 pages for 'adding'.

Page 414/467 | < Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421 | Next Page >

- by StuartBrierley

- by Geertjan

- by David Dorf

- by nbm

- by Arda Eralp

- by Tim Murphy

- by AndyH

- by reza_rahman

- by Boreal

- by ByronNevins

- by MightyZot

- by Steve Wilkes

- by skiwi

- by alanc

- by Azaral

- by Orin MacGregor

- by Roman Schindlauer

- by ToStringTheory

- by Kian

- by BillF

- by Ant

- by Greenhouse Gases

- by Emtucifor

- by Emtucifor

- by a432511

< Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421 | Next Page >