Search Results

Search found 11897 results on 476 pages for 'dean rather'.

Page 415/476 | < Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >

  • How does the Trash Can work, and where can I find official documentation, reference, or specification for it?

    - by MestreLion
    When trying to manage trash can from mounted NTFS volumes, I ended up reading FreeDesktop.org's reference on it. Poking around and doing some tests, I realized Ubuntu/Gnome does not follow the specs 100%. Here's why: For non-/ partitions, it always uses <driveroot>/.Trash-<uid>, It never used <driveroot>/.Trash/<uid>, even when i created it in advance. While this works, it's annoying: if I have 15 users, I end up with 15 /.Trash-xxx folders in my drive, while the other approach would still give a single folder (with 15 sub-folders). That "pollution" in my drives is very unpleasant. And specs say "If an $topdir/.Trash directory is absent, an $topdir/.Trash-$uid directory is to be used". Well, it IS present, so why does it never use it? root trash does not work, at least not out of the box. Open nautilus as root and click on trash; it gives an error. Try to delete any file, it says "it can't move to trash". Ok, I know this can be fixed by creating /root/.local/share. But specs says "A “home trash” directory SHOULD be automatically created for any new user. If this directory is needed for a trashing operation but does not exist, the implementation SHOULD automatically create it, without any warnings or delays.". Why the error then? Bug? Why must I change /etc/fstab entries for mounted volumes, adding options like uid and guid, if the volumes are already mounted as RW for everyone? These are just some examples of deviation from the standard. So, the question is: "If Ubuntu does not adhere 100% to the spec, HOW exactly does the trash work? WHERE can i find a technical reference for Ubuntu's implementation of the trash?" By the way: if Ubuntu does happen to follow specs, please tell me what I am doing wrong, especially regarding the /.Trash-<uid> vs /.Trash/<uid> issue. Thanks! EDIT: Some more info: If a given fs has no support for the sticky bit (VFAT, NTFS), it probably doesn't have for permissions either (at least VFAT surely doesn't). So what prevents one user from purging / restoring other users' ./Trash-xxx ? If one can read/write his own Trash, one can do the same for the whole drive, including other's trashes, correct? Or does Gnome have some kind of "extra" protection on ./Trash-xxx folders on VFAT/NTFS fs? If Linux can "emulate" file permissions on NTFS mounting by editing /fstab uid and gid options, can it also "emulate" the sticky bit? I would really prefer to use /.Trash/xxx format... For the root issue: for the / partition, I can use trash as root, and it goes to /root/.local/shate/Trash. But if I click on Nautilus "Trash" (as root), I get an error. Don't you? So files are correctly trashed, but I can't access it. All I can do is manually "purge" them (by deleting files on /root/.local/shate/Trash), but restoring would be very tricky (opening info files and manually moving, etc.). For non-/ partitions (or at least for VFAT/NTFS), I can not even use trash as root: it does not create a ./Trash-0 folder, it simply says "Cannot trash, want to permanently delete?" Why? About fstab: i use it for a permanent mount for my NTFS partitions. I have several, and if not "pre-mounted" they really clutter the desktop and/or Nautilus. I'd rather have it pre-mounted, integrated in my fs, in mounts like /data , /windows/xp , /windows/vista , and so on, and leave /media and its "mount/unmount" flexibility just for truly removable drives. So, if Ubuntu/Gnome truly follows the spec, is there any way to fix the root issues and to "emulate" the sticky bit for (at least) my fstab'ed NTFS fixed partitions?

    Read the article

  • Stir Trek 2: Iron Man Edition

    Next month (7 May 2010) Ill be presenting at the second annual Stir Trek event in Columbus, Ohio. Stir Trek (so named because last year its themes mixed MIX and the opening of the Star Trek movie) is a very cool local event.  Its a lot of fun to present at and to attend, because of its unique venue: a movie theater.  And whats more, the cost of admission includes a private showing of a new movie (this year: Iron Man 2).  The sessions cover a variety of topics (not just Microsoft), similar to CodeMash.  The event recently sold out, so Im not telling you all of this so that you can go and sign up (though I believe you can get on the waitlist still).  Rather, this is pretty much just an excuse for me to talk about my session as a way to organize my thoughts. Im actually speaking on the same topic as I did last year, but the key difference is that last year the subject of my session was nowhere close to being released, and this year, its RTM (as of last week).  Thats right, the topic is Whats New in ASP.NET 4 how did you guess? Whats New in ASP.NET 4 So, just what *is* new in ASP.NET 4?  Hasnt Microsoft been spending all of their time on Silverlight and MVC the last few years?  Well, actually, no.  There are some pretty cool things that are now available out of the box in ASP.NET 4.  Theres a nice summary of the new features on MSDN.  Here is my super-brief summary: Extensible Output Caching use providers like distributed cache or file system cache Preload Web Applications IIS 7.5 only; avoid the startup tax for your site by preloading it. Permanent (301) Redirects are finally supported by the framework in one line of code, not two. Session State Compression Can speed up session access in a web farm environment.  Test it to see. Web Forms Features several of which mirror ASP.NET MVC advantages (viewstate, control ids) Set Meta Keywords and Description easily Granular and inheritable control over ViewState Support for more recent browsers and devices Routing (introduced in 3.5 SP1) some new features and zero web.config changes required Client ID control makes client manipulation of DOM elements much simpler. Row Selection in Data Controls fixed (id based, not row index based) FormView and ListView enhancements (less markup, more CSS compliant) New QueryExtender control makes filtering data from other Data Source Controls easy More CSS and Accessibility support Reduction of Tables and more control over output for other template controls Dynamic Data enhancements More control templates Support for inheritance in the Data Model New Attributes ASP.NET Chart Control (learn more) Lots of IDE enhancements Web Deploy tool My session will cover many but not all of these features.  Theres only an hour (3pm-4pm), and its right before the prize giveaway and movie showing, so Ill be moving quickly and most likely answering questions off-line via email after the talk. Hope to see you there! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Educational, well-written FOSS projects to read, study or discuss

    - by Godot
    Before you say it: yes, this "question" has been asked other times. However, I could not fine many of such questions and not that easily, and those I found had similar results. What I'm trying to say that there are no comprehensive lists of well written Open Source projects, so I decided to set some requirements for the entries (one or possibly more): Idiomatic use of the language in which they are written The project should be lightweight. Not as in "a few kbs", as in "clean" and possibly following the UNIX philosophy, making an efficient use of resources and performing its duty and nothing more. No code bloat, most importantly. Projects like Firefox and GNOME wouldn't qualify, for example. Minimal reliance on external, non-standard libraries, with exceptions for some common FOSS libraries (curses, Xlib, OpenGL and possibly "usual suspects" like gtk+, webkit and Boost). Reliance on well-written libraries is welcome. No reliance on proprietary software - for obvious reasons (programs that rely on XNA, DirectX, Cocoa and similar, for example). Well-documented code is welcome. Include link to web interfaces to their repositories if possible. Here are some sample projects that often pop up in these threads: Operating Systems Plan 9 from Bell Labs: More or less, the official "sequel" to UNIX. Written in C by the same people who invented C! NetBSD: The most portable BSD implementation, written in C and also a good example of portable and organized code. Network and Databases Sqlite: Extremely lightweight and extremely efficient, one of the best pieces of C software I've seen. Count the lines yourself! Lighttpd: A small but pretty reliable web server written in C. Programming languages and VMs Lua: extremely lightweight multi-paradigm programming language. Written in C. Tiny C Compiler: Really tiny C compiler. Not really comparable to GCC or Clang but does its job. PyPy: A Python implementation written in Python. Pharo: OK, I admit it, I'm not really a Smalltalk expert but Pharo is a fork of Squeak and looked rather interesting. Stackless Python - An implementation of Python that doesn't rely on the C call stack - written in C (with some parts in Python) Games and 3D: Angband: One of the most accessible roguelike codebases around here, written in C. Ogre3D: Cross-platform 3D engine. Gets bloated if you don't skip the platform-specific implementation code, otherwise is a pretty solid example of good C++ OO. Simon Tatham's Portable Puzzle Collection: Title says it all. Other - dwm: Lightweight window manager. Written in C. Emulation and Reverse Engineering - Bochs: x86 emulator, written in C++ and tiny enough. - MAME: If you want to see C at one of its lowest levels, MAME is for you. May not be as clean as the other projects but it can teach you A LOT. Before you ask: I didn't mention Linux because it has become quite bloated in the last few years, Linus has also confirmed it. Nonetheless, it'd be a great educational read the same, even if for other reasons. Same for GCC. Feel free to edit or wikify my post. I hope you won't lock my question, I'm only trying to organize a little community effort for the good of all those people who want to enhance their coding skills.

    Read the article

  • HOWTO Turn off SPARC T4 or Intel AES-NI crypto acceleration.

    - by darrenm
    Since we released hardware crypto acceleration for SPARC T4 and Intel AES-NI support we have had a common question come up: 'How do I test without the hardware crypto acceleration?'. Initially this came up just for development use so developers can do unit testing on a machine that has hardware offload but still cover the code paths for a machine that doesn't (our integration and release testing would run on all supported types of hardware anyway).  I've also seen it asked in a customer context too so that we can show that there is a performance gain from the hardware crypto acceleration, (not just the fact that SPARC T4 much faster performing processor than T3) and measure what it is for their application. With SPARC T2/T3 we could easily disable the hardware crypto offload by running 'cryptoadm disable provider=n2cp/0'.  We can't do that with SPARC T4 or with Intel AES-NI because in both of those classes of processor the encryption doesn't require a device driver instead it is unprivileged user land callable instructions. Turns out there is away to do this by using features of the Solaris runtime loader (ld.so.1). First I need to expose a little bit of implementation detail about how the Solaris Cryptographic Framework is implemented in Solaris 11.  One of the new Solaris 11 features of the linker/loader is the ability to have a single ELF object that has multiple different implementations of the same functions that are selected at runtime based on the capabilities of the machine.  The alternate to this is having the application coded to call getisax() and make the choice itself.  We use this functionality of the linker/loader when we build the userland libraries for the Solaris Cryptographic Framework (specifically libmd.so, and the unfortunately misnamed due to historical reasons libsoftcrypto.so) The Solaris linker/loader allows control of a lot of its functionality via environment variables, we can use that to control the version of the cryptographic functions we run.  To do this we simply export the LD_HWCAP environment variable with values that tell ld.so.1 to not select the HWCAP section matching certain features even if isainfo says they are present.  For SPARC T4 that would be: export LD_HWCAP="-aes -des -md5 -sha256 -sha512 -mont -mpul" and for Intel systems with AES-NI support: export LD_HWCAP="-aes" This will work for consumers of the Solaris Cryptographic Framework that use the Solaris PKCS#11 libraries or use libmd.so interfaces directly.  It also works for the Oracle DB and Java JCE.  However does not work for the default enabled OpenSSL "t4" or "aes-ni" engines (unfortunately) because they do explicit calls to getisax() themselves rather than using multiple ELF cap sections. However we can still use OpenSSL to demonstrate this by explicitly selecting "pkcs11" engine  using only a single process and thread.  $ openssl speed -engine pkcs11 -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 54170.81k 187416.00k 489725.70k 805445.63k 1018880.00k $ LD_HWCAP="-aes" openssl speed -engine pkcs11 -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 29376.37k 58328.13k 79031.55k 86738.26k 89191.77k We can clearly see the difference this makes in the case where AES offload to the SPARC T4 was disabled. The "t4" engine is faster than the pkcs11 one because there is less overhead (again on a SPARC T4-1 using only a single process/thread - using -multi you will get even bigger numbers). $ openssl speed -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 85526.61k 89298.84k 91970.30k 92662.78k 92842.67k Yet another cool feature of the Solaris linker/loader, thanks Rod and Ali. Note these above openssl speed output is not intended to show the actual performance of any particular benchmark just that there is a significant improvement from using hardware acceleration on SPARC T4. For cryptographic performance benchmarks see the http://blogs.oracle.com/BestPerf/ postings.

    Read the article

  • Remote Desktop (Vino-Server) connects but display doesn't work?

    - by kmassada
    Ubuntu comes default with vino-server, I can remote into my machine, and connect to it, however, the display inside my remote client, is a mirror of my own desktop. I tried using one monitor, thinking that's what is the issue but still won't work. (vino-server:3608): EggSMClient-CRITICAL **: egg_sm_client_set_mode: assertion `global_client == NULL || global_client_mode == EGG_SM_CLIENT_MODE_DISABLED' failed 25/07/2012 12:23:58 PM Autoprobing TCP port in (all) network interface 25/07/2012 12:23:58 PM Listening IPv6://[::]:5900 25/07/2012 12:23:58 PM Listening IPv4://0.0.0.0:5900 25/07/2012 12:23:58 PM Autoprobing selected port 5900 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Re-binding socket to listen for VNC connections on TCP port 5900 in (all) interface 25/07/2012 12:23:58 PM Listening IPv6://[::]:5900 25/07/2012 12:23:58 PM Listening IPv4://0.0.0.0:5900 25/07/2012 12:23:58 PM Clearing securityTypes 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Clearing securityTypes 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Advertising authentication type: 'No Authentication' (1) 25/07/2012 12:23:58 PM Re-binding socket to listen for VNC connections on TCP port 5900 in (all) interface 25/07/2012 12:23:58 PM Listening IPv6://[::]:5900 25/07/2012 12:23:58 PM Listening IPv4://0.0.0.0:5900 25/07/2012 12:23:58 PM Clearing securityTypes 25/07/2012 12:23:58 PM Clearing authTypes 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Advertising authentication type: 'VNC Authentication' (2) 25/07/2012 12:23:58 PM Clearing securityTypes 25/07/2012 12:23:58 PM Clearing authTypes 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Advertising authentication type: 'VNC Authentication' (2) 25/07/2012 12:23:58 PM Advertising security type: 'VNC Authentication' (2) (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. 25/07/2012 12:24:16 PM [IPv4] Got connection from client static-XXXX.bltmmd.fios.verizon.net 25/07/2012 12:24:16 PM other clients: 25/07/2012 12:24:29 PM Client Protocol Version 3.7 25/07/2012 12:24:29 PM Advertising security type 18 25/07/2012 12:24:29 PM Advertising security type 2 25/07/2012 12:24:30 PM Client returned security type 18 25/07/2012 12:24:30 PM Advertising authentication type 2 25/07/2012 12:24:30 PM Client returned authentication type 2 25/07/2012 12:24:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -258 25/07/2012 12:24:37 PM Enabling NewFBSize protocol extension for client static-XXXX.bltmmd.fios.verizon.net 25/07/2012 12:24:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type 1464686185 25/07/2012 12:24:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -259 25/07/2012 12:24:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -257 (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. 25/07/2012 12:24:55 PM Client static-XXXX.bltmmd.fios.verizon.net gone 25/07/2012 12:24:55 PM Statistics: 25/07/2012 12:24:55 PM key events received 0, pointer events 80 25/07/2012 12:24:55 PM framebuffer updates 43, rectangles 152, bytes 292401 25/07/2012 12:24:55 PM tight rectangles 152, bytes 292401 25/07/2012 12:24:55 PM raw bytes equivalent 11621332, compression ratio 39.744502 25/07/2012 12:25:21 PM [IPv4] Got connection from client static-XXXX.bltmmd.fios.verizon.net 25/07/2012 12:25:21 PM other clients: 25/07/2012 12:25:28 PM Client Protocol Version 3.7 25/07/2012 12:25:28 PM Advertising security type 18 25/07/2012 12:25:28 PM Advertising security type 2 25/07/2012 12:25:28 PM Client returned security type 18 25/07/2012 12:25:29 PM Advertising authentication type 2 25/07/2012 12:25:29 PM Client returned authentication type 2 25/07/2012 12:25:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -258 25/07/2012 12:25:37 PM Enabling NewFBSize protocol extension for client static-XXXX.bltmmd.fios.verizon.net 25/07/2012 12:25:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type 1464686185 25/07/2012 12:25:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -259 25/07/2012 12:25:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -257 (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. 25/07/2012 12:25:47 PM Client static-XXXX.bltmmd.fios.verizon.net gone 25/07/2012 12:25:47 PM Statistics: 25/07/2012 12:25:47 PM key events received 0, pointer events 7283 25/07/2012 12:25:47 PM framebuffer updates 27, rectangles 82, bytes 113354 25/07/2012 12:25:47 PM tight rectangles 82, bytes 113354 25/07/2012 12:25:47 PM raw bytes equivalent 5831432, compression ratio 51.444431 couple of things I notice, the following error occurs over and over again. the menu error seems to be caused by ubuntu, similar problems occur http://trac.wxwidgets.org/ticket/14292, (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. the second one also seem to be a display related issue, can't seem to figure out a solution. I really rather try to fix this issue than have to use the other vnc clients most suggest. (vino-server:3608): EggSMClient-CRITICAL **: egg_sm_client_set_mode: assertion `global_client == NULL || global_client_mode == EGG_SM_CLIENT_MODE_DISABLED' failed

    Read the article

  • How Can I Start an Incognito/Private Browsing Window from a Shortcut?

    - by Jason Fitzpatrick
    Sometimes you just want to pop the browser open for a quick web search without reloading all your saved tabs; read on as we show a fellow reader how to make a quick private-browsing shortcut. Dear How-To Geek, I came up with a solution to my problem, but I need your help implementing it. I typically have a ton of tabs open in my web browser and, when I need to free up system resources when gaming or using a resource intense application, I shut down the web browser. The problem arises when I find myself needing to do quick web search while the browser is shut down. I don’t want to open it up, load all the tabs, and waste the resources in doing so all for a quick Google search. The perfect solution, it would seem, is to open up one of Chrome’s Incognito windows: it loads separate, it won’t open up all the old tabs, and it’s perfect for a quick Google search. Is there a way to launch Chrome with a single Incognito window open without having to open the browser in the normal mode (and load the bazillion tabs I have sitting there)? Sincerely, Tab Crazy That’s a rather clever work around to your problem. Since you’ve already done the hard work of figuring out the solution you need, we’re more than happy to help you across the finish line. The magic you seek is available via what are known as “command line options” which allow you to add additional parameters and switches onto a command.   By appending the command the Chrome shortcut uses, we can easily tell it to launch in Incognito mode. (And, for other readers following along at home, we can do the same thing with other browsers like Firefox). First, let’s look at Chrome’s default shortcut: If you right click on it and select the properties menu, you’ll see where the shortcut points: "C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" If you run that shortcut, you’ll open up normal browsing mode in Chrome and your saved tabs will all load. What we need to do is use the command line switches available for Chrome and tell it that we want it to launch an Incognito window instead. Doing so is as simple as appending the end of the “Target” box’s command line entry with -incognito, like so: "C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" -incognito We’d also recommend changing the icon to it’s easy to tell the default Chrome shortcut apart from your new Incognito shortcut. When you’re done, make sure to hit OK/Apply at the button to save the changes. You can recreate the same private-browsing-shortcut effect with other major web browsers too. Repeat shortcut editing steps we highlighted above, but change out the -incognito with -private (for Firefox and Internet Explorer) and -newprivatetab (for Opera). With just a simple command line switch applied, you can now launch a lightweight single browser window for those quick web searches without having to stop your game and load up all your saved tabs. Have a pressing tech question? Email us at [email protected] and we’ll do our best to answer it.

    Read the article

  • Windows Azure SDK 1.3 addresses early adopter feedback

    - by Eric Nelson
    At the end of November 2010 we released a new version of the Windows Azure SDK which contains many new features driven by the great feedback of early adopters plus a shiny new portal. New Portal implemented in Silverlight: The new portal is implemented using Silverlight and replaces the (IMHO rather clunky) original HTML + JavaScript portal. It is 100% better although does still have a few bugs. Enjoy! P.S. You can if you wish still use the old portal:   New runtime functionality: The following functionality is now generally available through the Windows Azure SDK and Windows Azure Tools for Visual Studio and the new Windows Azure Management Portal: Elevated Privileges and Full IIS. You can now run a portion or all of your code in Web and Worker roles with elevated administrator privileges. The Web role now provides Full IIS functionality, which enables multiple IIS sites per Web role and the ability to install IIS modules. Remote Desktop functionality enables you to connect to a running instance of your application or service in order to monitor activity and troubleshoot common problems. Windows Server 2008 R2 Roles: Windows Azure now supports Windows Server 2008 R2 in its Web, worker and VM roles. This new support enables you to take advantage of the full range of Windows Server 2008 R2 features such as IIS 7.5, AppLocker, and enhanced command-line and automated management using PowerShell Version 2.0. New runtime functionality – in beta: Windows Azure Virtual Machine Role: Support for more types of new and existing Windows applications will soon be available with the introduction of the Virtual Machine (VM) role. You can move more existing applications to Windows Azure, reducing the need to make costly code or deployment changes. Extra Small Windows Azure Instance, which is priced at $0.05 per compute hour, provides developers with a cost-effective training and development environment. Developers can also use the Extra Small instance to prototype cloud solutions at a lower cost. Windows Azure Connect: (formerly Project Sydney), which enables a simple and easy-to-manage mechanism to set up IP-based network connectivity between on-premises and Windows Azure resources, is the first Windows Azure Virtual Network feature that we’re making available as a CTP. You can sign up for any of the betas via the Windows Azure Management Portal. Improved processes and simplified operations New portal! (see above) Access to new diagnostic information including the ability to click on a role to see role type, deployment time and last reboot time A new sign-up process that dramatically reduces the number of steps needed to sign up for Windows Azure. New scenario based Windows Azure Platform forums to help answer questions and share knowledge more efficiently. Multiple Service Administrators: Windows Azure now supports multiple Windows Live IDs to have administrator privileges on the same Windows Azure account. The objective is to make it easy for a team to work on the same Windows Azure account while using their individual Windows Live IDs.   Related Links Please also let us know through Microsoft Platform Ready if and when you intend to build an application using the Windows Azure Platform. Or indeed if you already have (Well done). You will get access to some great benefits if you do (more on that in a future post). It also really helps us better understand the demand out there which directly impacts how we will plan the next six months of activities around the Windows Azure Platform. Visit Microsoft Platform Ready to tell us about your plans for your applications UK based? Interested in the Windows Azure Platform? Join http://ukazure.ning.com Get started with the Windows Azure Platform http://bit.ly/startazure

    Read the article

  • links for 2010-12-23

    - by Bob Rhubart
    Oracle VM Virtualbox 4.0 extension packs (Wim Coekaerts Blog) Wim Coekaerts describes the the new extension pack in Oracle VM Virtualbox 4.0 and how it's different from 3.2 and earlier releases. (tags: oracle otn virtualization virtualbox) Oracle Fusion Middleware Security: Creating OES SM instances on 64 bit systems "I've already opened a bug on this against OES 10gR3 CP5, but in case anyone else runs into it before it gets fixed I wanted to blog it too. (NOTE: CP5 is when official support was introduced for running OES on a 64 bit system with a 64 bit JVM)" - Chris Johnson (tags: oracle otn fusionmiddleware security) Oracle Enterprise Manager Grid Control: Shared loader directory, RAC and WebLogic Clustering "RAC is optional. Even the load balancer is optional. The feed from the agents also goes to the load balancer on a different port and it is routed to the available management server. In normal case, this is ok." - Porus Homi Havewala (tags: WebLogic oracle otn grid clustering) Magic Web Doctor: Thought Process on Upgrading WebLogic Server to 11g "Upgrading to new versions can be challenging task, but it's done for linear scalability, continuous enhanced availability, efficient manageability and automatic/dynamic infrastructure provisioning at a low cost." - Chintan Patel (tags: oracle otn weblogic upgrading) InfoQ: Using a Service Bus to Connect the Supply Chain Peter Paul van de Beek presents a case study of using a service bus in a supply channel connecting a wholesale supplier with hundreds of retailers, the overall context and challenges faced – including the integration of POS software coming from different software providers-, the solution chosen and its implementation, how it worked out and the lessons learned along the way. (tags: ping.fm) Oracle VM VirtualBox 4.0 is released! - The Fat Bloke Sings The Fat Bloke spreads the news and shares some screenshots.  (tags: oracle otn virtualization virtualbox) Leaks on Wikis: "Corporations...You're Next!" Oracle Desktop Virtualization Can Help. (Oracle's Virtualization Blog) "So what can you do to guard against these types of breaches where there is no outsider (or even insider) intrusion to detect per se, but rather someone with malicious intent is physically walking out the door with data that they are otherwise allowed to access in their daily work?" - Adam Hawley (tags: oracle otn virtualization security) OTN ArchBeat Podcast Guest Roster As the OTN ArchBeat Podcast enters its third year, it's time to acknowledge the invaluable contributions of the guests who have participated in ArchBeat programs. Check out this who's who of ArchBeat podcast panelists, with links to their respective interviews and more. (tags: oracle otn oracleace podcast archbeat) Show Notes: Architects in the Cloud (ArchBeat) Now available! Part 2 (of 4) of the ArchBeat interview with Stephen G. Bennett and Archie Reed, the authors of "Silver Clouds, Dark Linings: A Concise Guide to Cloud Computing." (tags: oracle otn podcast cloud) A Cautionary Tale About Multi-Source JNDI Configuration (Scott Nelson's Portal Productivity Ponderings) "I ran into this issue after reading that p13nDataSource and cgDataSource-NonXA should not be configured as multi-source. There were some issues changing them to use the basic JDBC connection string and when rolling back to the bad configuration the server went 'Boom.'" - Scott Nelson (tags: weblogic jdbc oracle jndi)

    Read the article

  • Mind Reading with the Raspberry Pi

    - by speakjava
    Mind Reading With The Raspberry Pi At JavaOne in San Francisco I did a session entitled "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi".  As part of this I showed some demonstrations of things I'd done using Java on the Raspberry Pi.  This is the first part of a series of blog entries that will cover all the different aspects of these demonstrations. A while ago I had bought a MindWave headset from Neurosky.  I was particularly interested to see how this worked as I had had the opportunity to visit Neurosky several years ago when they were still developing this technology.  At that time the 'headset' consisted of a headband (very much in the Bjorn Borg style) with a sensor attached and some wiring that clearly wasn't quite production ready.  The commercial version is very simple and easy to use: there are two sensors, one which rests on the skin of your forehead, the other is a small clip that attaches to your earlobe. Typical EEG sensors used in hospitals require lots of sensors and they all need copious amounts of conductive gel to ensure the electrical signals are picked up.  Part of Neurosky's innovation is the development of this simple dry-sensor technology.  Having put on the sensor and turned it on (it powers off a single AAA size battery) it collects data and transmits it to a USB dongle plugged into a PC, or in my case a Raspberry Pi. From a hacking perspective the USB dongle is ideal because it does not require any special drivers for any complex, low level USB communication.  Instead it appears as a simple serial device, which on the Raspberry Pi is accessed as /dev/ttyUSB0.  Neurosky have published details of the command protocol.  In addition, the MindSet protocol document, including sample code for parsing the data from the headset, can be found here. To get everything working on the Raspberry Pi using Java the first thing was to get serial communications going.  Back in the dim distant past there was the Java Comm API.  Sadly this has grown a bit dusty over the years, but there is a more modern open source project that provides compatible and enhanced functionality, RXTXComm.  This can be installed easily on the Pi using sudo apt-get install librxtx-java.  Next I wrote a library that would send commands to the MindWave headset via the serial port dongle and read back data being sent from the headset.  The design is pretty simple, I used an event based system so that code using the library could register listeners for different types of events from the headset.  You can download a complete NetBeans project for this here.  This includes javadoc API documentation that should make it obvious how to use it (incidentally, this will work on platforms other than Linux.  I've tested it on Windows without any issues, just by changing the device name to something like COM4). To test this I wrote a simple application that would connect to the headset and then print the attention and meditation values as they were received from the headset.  Again, you can download the NetBeans project for that here. Oracle recently released a developer preview of JavaFX on ARM which will run on the Raspberry Pi.  I thought it would be cool to write a graphical front end for the MindWave data that could take advantage of the built in charts of JavaFX.  Yet another NetBeans project is available here.  Screen shots of the app, which uses a very nice dial from the JFxtras project, are shown below. I probably should add labels for the EEG data so the user knows which is the low alpha, mid gamma waves and so on.  Given that I'm not a neurologist I suspect that it won't increase my understanding of what the (rather random looking) traces mean. In the next blog I'll explain how I connected a LEGO motor to the GPIO pins on the Raspberry Pi and then used my mind to control the motor!

    Read the article

  • Managing game state / 'what to update' within an XNA game 'screen'

    - by codinghands
    Note - having read through other GDev questions suggested when writing this question I'm confident this isn't a dupe. Of course, it's 3am and I'm likely wrong, so please mod as such if so. I'm trying to figure out how best to manage state within my game screens - please bare with me though! At the moment I'm using a heavily modified version of the fantastic game state management example on the XNA site available here. This is working perfectly for my 'Screens' - 'IntroScreen' with some shiny logos, 'TitleScreen' and a 'MenuScreen' stacked on top for the title and menu, 'PlayScreen' for the actual gameplay, etc. Each screen has the a bunch of sprites, and an 'Update' and 'Draw', managed by a 'ScreenManager'. In addition to the above, and as suggested as an answer to my other question here, most screens have a 'GameProcessQueue' class full of 'GameProcess'es which lets me do just about anything (animations, youbetcha!), in any order, in sequence or parallel. Why mention all this? When I talk about managing game state I'm thinking more for complex scenarios within a 'Screen'. 'TitleScreen', 'MenuScreen' and the like are all relatively simple. 'Play Screen' less so. How do people manage the different 'states' within the screen (or whatever you call it) that 'does' gameplay? (for me, the 'PlayScreen') I've thought about the following: Enum of different states in the Screen, 'activeState' enum-type variable, switching on the enum in the Screen Update() loop to determine what Screen Update 'sub'-function is called. I can see this getting hairy pretty fast though as screens get more complex and with the 'PlayScreen' becoming a behemoth mega-class. 'State' class with Update loop - a Screen can have any number of 'States', 1+ of which are 'active'. Screen update loop calls update on all active states. States themselves know which screen they belong to, and may even belong to a 'StateManager' which handles transitioning from one state to the next. Once a state is over it's removed from the ScreenState list. The Screen doesn't need a bunch of GameProcessQueues, each State has its own. Abstract Screen further to be more flexible - I can see the similarities between what I've got (game 'Screens' handled by a ScreenManager) and what I want (states within a screen, and a mechanism to manage them). However at the moment I see 'Screens' as high level and very distinct ('PlayScreen' with baddies != 'MenuScreen' with 4 words and event handlers), where as my proposed 'States' are more intrinsically tied to a specific screen with complex requirements. I think. This is for a turn-based board game, so it's easier to define things as a discrete series of steps (IntroAnimation - P1Turn - P2Turn - P1Turn ... - GameOver - .... Obviously with an open-world RPG things are very different, but any advice in this scenario is appreciated. If I'm just going OOP-crazy please say so. Similarly I'm concious there's a huge amount on this site re: state management. But as my first 'serious' game after a couple of false starts I'd like to get this right, and would rather be harassed and modded down than never ask :)

    Read the article

  • Exploring TCP throughput with DTrace

    - by user12820842
    One key measure to use when assessing TCP throughput is assessing the amount of unacknowledged data in the pipe. This is sometimes termed the Bandwidth Delay Product (BDP) (note that BDP is often used more generally as the product of the link capacity and the end-to-end delay). In DTrace terms, the amount of unacknowledged data in bytes for the connection is the different between the next sequence number to send and the lowest unacknoweldged sequence number (tcps_snxt - tcps_suna). According to the theory, when the number of unacknowledged bytes for the connection is less than the receive window of the peer, the path bandwidth is the limiting factor for throughput. In other words, if we can fill the pipe without the peer TCP complaining (by virtue of its window size reaching 0), we are purely bandwidth-limited. If the peer's receive window is too small however, the sending TCP has to wait for acknowledgements before it can send more data. In this case the round-trip time (RTT) limits throughput. In such cases the effective throughput limit is the window size divided by the RTT, e.g. if the window size is 64K and the RTT is 0.5sec, the throughput is 128K/s. So a neat way to visually determine if the receive window of clients may be too small should be to compare the distribution of BDP values for the server versus the client's advertised receive window. If the BDP distribution overlaps the send window distribution such that it is to the right (or lower down in DTrace since quantizations are displayed vertically), it indicates that the amount of unacknowledged data regularly exceeds the client's receive window, so that it is possible that the sender may have more data to send but is blocked by a zero-window on the client side. In the following example, we compare the distribution of BDP values to the receive window advertised by the receiver (10.175.96.92) for a large file download via http. # dtrace -s tcp_tput.d ^C BDP(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count -1 | 0 0 | 6 1 | 0 2 | 0 4 | 0 8 | 0 16 | 0 32 | 0 64 | 0 128 | 0 256 | 3 512 | 0 1024 | 0 2048 | 9 4096 | 14 8192 | 27 16384 | 67 32768 |@@ 1464 65536 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 32396 131072 | 0 SWND(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count 16384 | 0 32768 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 17067 65536 | 0 Here we have a puzzle. We can see that the receiver's advertised window is in the 32768-65535 range, while the amount of unacknowledged data in the pipe is largely in the 65536-131071 range. What's going on here? Surely in a case like this we should see zero-window events, since the amount of data in the pipe regularly exceeds the window size of the receiver. We can see that we don't see any zero-window events since the SWND distribution displays no 0 values - it stays within the 32768-65535 range. The explanation is straightforward enough. TCP Window scaling is in operation for this connection - the Window Scale TCP option is used on connection setup to allow a connection to advertise (and have advertised to it) a window greater than 65536 bytes. In this case the scaling shift is 1, so this explains why the SWND values are clustered in the 32768-65535 range rather than the 65536-131071 range - the SWND value needs to be multiplied by two since the reciever is also scaling its window by a shift factor of 1. Here's the simple script that compares BDP and SWND distributions, fixed to take account of window scaling. #!/usr/sbin/dtrace -s #pragma D option quiet tcp:::send / (args[4]-tcp_flags & (TH_SYN|TH_RST|TH_FIN)) == 0 / { @bdp["BDP(bytes)", args[2]-ip_daddr, args[4]-tcp_sport] = quantize(args[3]-tcps_snxt - args[3]-tcps_suna); } tcp:::receive / (args[4]-tcp_flags & (TH_SYN|TH_RST|TH_FIN)) == 0 / { @swnd["SWND(bytes)", args[2]-ip_saddr, args[4]-tcp_dport] = quantize((args[4]-tcp_window)*(1 tcps_snd_ws)); } And here's the fixed output. # dtrace -s tcp_tput_scaled.d ^C BDP(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count -1 | 0 0 | 39 1 | 0 2 | 0 4 | 0 8 | 0 16 | 0 32 | 0 64 | 0 128 | 0 256 | 3 512 | 0 1024 | 0 2048 | 4 4096 | 9 8192 | 22 16384 | 37 32768 |@ 99 65536 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 3858 131072 | 0 SWND(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count 512 | 0 1024 | 1 2048 | 0 4096 | 2 8192 | 4 16384 | 7 32768 | 14 65536 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 1956 131072 | 0

    Read the article

  • Antenna Aligner Part 4: Role'ing in the deep

    - by Chris George
    Since last time I've been trying to sort out the general workflow of the app. It's fundamentally not hard, there is a list of transmitters, you select a transmitter and it shows the compass view. Having done quite a bit of ajax/asp.net/html in the past, I immediately started off by creating two divs within my 'page', one for the list, one for the compass. Then using the onClick event in the list, this will switch the display attribute on the divs. This seemed to work, but did lead to some dodgy transitional redrawing artefacts which I was not happy with. So after some Googling I realised I was doing it all wrong! JQuery mobile has the concept of giving an object in html a data-role. By giving a div the attribute data-role="page" it is then treated as a separate page on the mobile device. Within the code, this is referenced like a html anchor in the form #mypage. Using this system, page transitions such as fade or slide are automatically applied which adds to the whole authenticity of the app! Here is a simple example: . <a href="#'compasspage">compass</a> . <div data-role="page" id="compasspage" data-add-back-btn="true"> But I don't want just a static link, I want to dynamically create my list, and get each list elements to switch to the compass page with the right information. So here is the jquery that I used to dynamically inject new <li> rows into the <ul> block. $('ul').append($('<li/>', {    //here appendin `<li>`     'data-role': "list-divider" }).append($('<a/>', {    //here appending `<a>` into `<li>`     'href': '#compasspage',     'data-transition': 'none',     'onclick': 'selectTx(' + i + ')',     'html': buttonHtml }))); $('ul').listview('refresh'); This is called within a for loop so the first 5 appropriate transmitters are used. There are several things of interest to note here. Firstly, I could not find a more elegant way to tell the target page which transmitter I've clicked on, so I have used the onclick event as well as the href attribute. The onclick event fires 'selectTx' which simply sets a global member variable to the specific index number I've clicked on. Yes it's not nice, but it works. Secondly, the data-transition attribute is set to 'none'. I wanted the transition between the pages to be a whooshy slidey effect. However this worked going to the compass page, but returning to the list page gave some undesirable visual artefacts (flickering, redrawing etc.). So I decided to remove the transitions all together, which was a shame. Thirdly, rather than embedding loads of html into the append command, I removed this out into a variable 'buttonHtml'. Doing this really tidied up my code. Until next time!

    Read the article

  • Hardware wireless switch has no effect after suspend and 13.10 upgrade

    - by blaineh
    This seems to be a fairly chronic problem, as shown by the following questions: How do I fix a "Wireless is disabled by hardware switch" error? Wireless disabled by hardware switch "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this? but no good solutions have been found! Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. All My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A ip=155.99.215.79 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. xev shows that no internal event is triggered for my wireless switch (f12), but other function keys also acting as hardware switches work fine. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. I just tried to reload bios defaults (or something) as shown by this video. Didn't work. Edit. I tried the contents of this answer, and it didn't work. Edit. I made a pastebin of dmesg. I couldn't even begin to understand the contents. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

    Read the article

  • JFall 2012

    - by Geertjan
    JFall 2012 was over far too soon! Seven tracks going on simultaneously in a great location, with many artifacts reminding me of JavaOne, and nice snacks and drinks afterwards. The day started, as such things always do, with a keynote. Thanks to @royvanrijn for the photo below, I didn't take any myself and without a picture this report might have been too dry: What you see above is Steve Chin riding into the keynote hall on his NightHacking bike. The keynote was interesting, I can't be too complimentary about it, since I was part of it myself. Bert Ertman introduced the day and then Steve Chin took over, together with Sharat Chander, Tom Eugelink, Timon Veenstra, and myself. We had a strict choreography for the keynote, one that would ensure a lot of variation and some unexpected surprises, such as Steve being thrown off the stage a few times by Bert because of mentioning JavaOne too many times, rather than the clearly much cooler JFall. Steve talked about JavaOne and the direction Java is headed in, Sharat talked about JavaME and embedded devices, Steve and Tom did a demo involving JavaFX, I did a Project Easel demo, and Timon from Ordina talked about his Duke's Choice Award winning AgroSense project. I think the Project Easel demo (which I repeated later in a screencast for Parleys arranged by Eugene Boogaart) came across well and several people I spoke to especially like the roundtrip/bi-directional work that can be done, from browser to IDE and back again, very simply and intuitively. (In a long conversation on the drive back home afterwards, the scenario of a designer laying out the UI in HTML and then handing the HTML to a developer for back-end work, a developer who would then find it convenient to open the HTML in a browser and quickly navigate from the browser to the resources within the IDE, was discussed and considered to be extremely interesting and worth considering adopting NetBeans for, for no other reason than that.) Later I attended a session by David Delabassee on Java EE 7, Hans Dockter on Gradle, and Sander Mak on cross-build injection attacks. I was sorry to have missed Martijn Verburg's session, which sounded like it was really fantastic, among others, such as Gerrit Grunwald. I did a session too, entitled "Unlocking the Java EE 6 Platform", which was very well attended, pretty much a full room, and the demo went very smoothly. I talked to many people, e.g., a long time with Hans Dockter about how cool Gradle is and how great the Gradle/NetBeans plugin is turning out to be. I also had a long conversation (and did a demo) with Chris Chedgey, from Structure101, after his session, which was incredibly well attended; very interesting how popular modularity is. I met several people for the first time, as well as some colleagues from past places I've worked at. All in all, it was a great conference, unfortunately too short, which was very well attended (clearly over 1000) people, with several international speakers, as well as international attendees such as Mattias Karlsson, Sweden JUG leader. And, unsurprisingly, I came across NetBeans Platform applications again, none of which I had ever heard of before. In each case, "our fat client application" was mentioned in passing, never as a main application, and never in a context where there are plans for the application to be migrated to the web or mobile, simply because doing so makes no business sense at all. Great times at JFall, looking forward to meeting with some of the people I met again soon.

    Read the article

  • Ask HTG: How Can I Check the Age of My Windows Installation?

    - by Jason Fitzpatrick
    Curious about when you installed Windows and how long you’ve been chugging along without a system refresh? Read on as we show you a simple way to see how long-in-the-tooth your Windows installation is. Dear How-To Geek, It feels like it has been forever since I installed Windows 7 and I’m starting to wonder if some of the performance issues I’m experiencing have something to do with how long ago it was installed. It isn’t crashing or anything horrible, mind you, it just feels slower than it used to and I’m wondering if I should reinstall it to wipe the slate clean. Is there a simple way to determine the original installation date of Windows on its host machine? Sincerely, Worried in Windows Although you only intended to ask one question, you actually asked two. Your direct question is an easy one to answer (how to check the Windows installation date). The indirect question is, however, a little trickier (if you need to reinstall Windows to get a performance boost). Let’s start off with the easy one: how to check your installation date. Windows includes a handy little application just for the purposes of pulling up system information like the installation date, among other things. Open the Start Menu and type cmd in the run box (or, alternatively, press WinKey+R to pull up the run dialog and enter the same command). At the command prompt, type systeminfo.exe Give the application a moment to run; it takes around 15-20 seconds to gather all the data. You’ll most likely need to scroll back up in the console window to find the section at the top that lists operating system stats. What you care about is Original Install Date: We’ve been running the machine we tested the command on since August 23 2009. For the curious, that’s one month and a day after the initial public release of Windows 7 (after we were done playing with early test releases and spent a month mucking around in the guts of Windows 7 to report on features and flaws, we ran a new clean installation and kept on trucking). Now, you might be asking yourself: Why haven’t they reinstalled Windows in all that time? Haven’t things slowed down? Haven’t they upgraded hardware? The truth of the matter is, in most cases there’s no need to completely wipe your computer and start from scratch to resolve issues with Windows and, if you don’t bog your system down with unnecessary and poorly written software, things keep humming along. In fact, we even migrated this machine from a traditional mechanical hard drive to a newer solid-state drive back in 2011. Even though we’ve tested piles of software since then, the machine is still rather clean because 99% of that testing happened in a virtual machine. That’s not just a trick for technology bloggers, either, virtualizing is a handy trick for anyone who wants to run a rock solid base OS and avoid the bog-down-and-then-refresh cycle that can plague a heavily used machine. So while it might be the case that you’ve been running Windows 7 for years and heavy software installation and use has bogged your system down to the point a refresh is in order, we’d strongly suggest reading over the following How-To Geek guides to see if you can’t wrangle the machine into shape without a total wipe (and, if you can’t, at least you’ll be in a better position to keep the refreshed machine light and zippy): HTG Explains: Do You Really Need to Regularly Reinstall Windows? PC Cleaning Apps are a Scam: Here’s Why (and How to Speed Up Your PC) The Best Tips for Speeding Up Your Windows PC Beginner Geek: How to Reinstall Windows on Your Computer Everything You Need to Know About Refreshing and Resetting Your Windows 8 PC Armed with a little knowledge, you too can keep a computer humming along until the next iteration of Windows comes along (and beyond) without the hassle of reinstalling Windows and all your apps.         

    Read the article

  • Don't Forget To Enjoy Life

    - by Justin
    I have a pretty clear stance on posting personal information in my blogs. I tend to avoid it almost instinctively. Part of that is because I am a somewhat private person. And the other is because I know how easy it is for personal information to be gathered and collected from sources such as blogs. So, this has remained a tech only blog for me. I've only posted topics mostly related to issues I have encountered at work. In a way this blog is a 'bookmark' for me. If I post something here and run into the issue again it allows me to refer back to a convenient place where the 'fix' is documented in a way that I understand. But today, I am posting something that speaks to everyone. Something PERSONAL. Honestly, I expect this entry to receive zero views. But if nothing else, I can come back to this blog one day when I'm having a bad day or something and run across this post. And I will be reminded... DON'T FORGET TO ENJOY LIFE. Say this to yourself out loud, right now. People, we can get caught up in some rather mundane details as we trek through life. It's so easy to lose track of what really matters that it should be no surprise to find yourself reading something like this and thinking to yourself 'Yeah. You are right, man. Some of this crap I'm clinging on to right now is so small in the grand scheme of things'. I have no reservation, no shame, in saying that I am more often than not caught up in the ever evolving world of 'shit that does not matter'. When you work in technology, you are surrounded by deadlines, upgrades, new versions, support 'end of life', etc. And by time you get done with your 8 hours you go home and put in a few more because you are STILL CAUGHT UP in the things you dealt with at work all day. DO YOURSELF A FAVOR. DO YOUR FAMILY AND FRIEND A FAVOR. When you are done for the day, and you drive home, get those work-related things out of your head before you pull into the driveway. If you are still thinking on them when you park the car, leave the engine running, close your eyes and take a deep breath. If you believe in God, pray. If you don't then meditate for a second with the INTENTION of letting go of the day and becoming the 'real you'. You may have forgotten who the real you is so I'll remind you.... THE REAL YOU IS THAT GUY OR GAL THAT LAUGHS, LOVES, AND LIVES. Be the real you as often as possible. If you can't do it during your 9 - 5, do it at home. YOUR RELATIONSHIPS AND YOUR PERSONAL HAPPINESS DEPEND ON IT. I am going to make you a promise right now. If you do what I've just said, your days will be longer and your joy will be exponential. I can't explain why I know this to be true. But I do know it. And if you are there reading this right now, you know it is true too. We both know it is true because it COMES FROM WITHIN EVERY MAN, WOMAN and CHILD. We are born into love and happiness. Lets not fade away into the darkness so easily found in this world. Lets keep the flame burning. The flame of passion. Passion for LIFE. Peace be with you.

    Read the article

  • Package Version Numbers, why are they so important

    - by Chris W Beal
    One of the design goals of IPS has been to allow people to easily move forward to a supported "Surface" of component. That is to say, when you  # pkg update your system, you get the latest set of components which all work together, based on the packages you already have installed. During development, this has meant simply you update to the latest "build" of the components. (During development, we build everything and publish everything every two weeks). Now we've released Solaris 11 using the IPS technologies, things are a bit more complicated. We need to be able to reflect all the types of Solaris release we are doing. For example Solaris Development builds, Solaris Update builds and "Support Repository Updates" (the replacement for patches) in the version scheme. So simply saying "151" as the build number isn't sufficient to articulate what you are running, or indeed what is available to update to In my previous blog post I talked about creating your own package, and gave an example FMRI of pkg://tools/[email protected],0.5.11-0.0.0 But it's probably more instructive to look at the FMRI of a Solaris package. The package "core-os" contains all the common utilities and daemons you need to use Solaris.  $ pkg info core-os Name: system/core-os Summary: Core Solaris Description: Operating system core utilities, daemons, and configuration files. Category: System/Core State: Installed Publisher: solaris Version: 0.5.11 Build Release: 5.11 Branch: 0.175.0.0.0.2.1 Packaging Date: Wed Oct 19 07:04:57 2011 Size: 25.14 MB FMRI: pkg://solaris/system/[email protected],5.11-0.175.0.0.0.2.1:20111019T070457Z The FMRI is what we will concentrate on here. In this package "solaris" is the publisher. You can use the pkg publisher command to see where the solaris publisher gets it's bits from $ pkg publisher PUBLISHER TYPE STATUS URI solaris origin online http://pkg.oracle.com/solaris/release/ So we can see we get solaris packages from pkg.oracle.com.  The package name is system/core-os. These can be arbitrary length, just to allow you to group similar packages together. Now on the the interesting? bit, the versions, everything after the @ is part of the version. IPS will only upgrade to a "higher" version. [email protected],5.11-0.175.0.0.0.2.1:20111019T070457Z core-os = Package Name0.5.11 = Component - in this case we're saying it's a SunOS 5.11 package, = separator5.11 = Built on version - to indicate what OS version you built the package on- = another separator0.175.0.0.0.2.1 = Branch Version : = yet another separator20111019T070457Z = Time stamp when the package was published So from that we can see the Branch Version seems rather complex. It is necessarily so, to allow us to describe the hierachy of releases we do In this example we see the following 0.175: is known as the trunkid, and is incremented each build of a new release of Solaris. During Solaris 11 this should not change  0: is the Update release for Solaris. 0 for FCS, 1 for update 1 etc 0: is the SRU for Solaris. 0 for FCS, 1 for SRU 1 etc 0: is reserved for future use 2: Build number of the SRU 1: Nightly ID - only important for Solaris developersTake a hypothetical example [email protected],5.11-0.175.1.5.0.4.1:<something> This would be build 4 of SRU 5 of Update 1 of Solaris 11 This is actually documented in a MOS article 1378134.1 Which you can read if you have a support contract.

    Read the article

  • How to use DI and DI containers

    - by Pinetree
    I am building a small PHP mvc framework (yes, yet another one), mostly for learning purposes, and I am trying to do it the right way, so I'd like to use a DI container, but I am not asking which one to use but rather how to use one. Without going into too much detail, the mvc is divided into modules which have controllers which render views for actions. This is how a request is processed: a Main object instantiates a Request object, and a Router, and injects the Request into the Router to figure out which module was called. then it instantiates the Module object and sends the Request to that the Module creates a ModuleRouter and sends the Request to figure out the controller and action it then creates the Controller and the ViewRenderer, and injects the ViewRenderer into the Controller (so that the controller can send data to the view) the ViewRenderer needs to know which module, controller and action were called to figure out the path to the view scripts, so the Module has to figure out this and inject it to the ViewRenderer the Module then calls the action method on the controller and calls the render method on the ViewRenderer For now, I do not have any DI container set up, but what I do have are a bunch of initX() methods that create the required component if it is not already there. For instance, the Module has the initViewRenderer() method. These init methods get called right before that component is needed, not before, and if the component was already set it will not initialize it. This allows for the components to be switched, but it does not require manually setting them if they are not there. Now, I'd like to do this by implementing a DI container, but still keep the manual configuration to a bare minimum, so if the directory structure and naming convention is followed, everything should work, without even touching the config. If I use the DI container, do I then inject it into everything (the container would inject itself when creating a component), so that other components can use it? When do I register components with the DI? Can a component register other components with the DI during run-time? Do I create a 'common' config and use that? How do I then figure out on the fly which components I need and how they need to be set up? If Main uses Router which uses Request, Main then needs to use the container to get Module (or does the module need to be found and set beforehand? How?) Module uses Router but needs to figure out the settings for the ViewRenderer and the Controller on the fly, not in advance, so my DI container can't be setting those on the Module before the module figures out the controller and action... What if the controller needs some other service? Do I inject the container into every controller? If I start doing that, I might just inject it into everything... Basically I am looking for the best practices when dealing with stuff like this. I know what DI is and what DI containers do, but I am looking for guidance to using them in real life, and not some isolated examples on the net. Sorry for the lengthy post and many thanks in advance.

    Read the article

  • Communication between state machines with hidden transitions

    - by slartibartfast
    The question emerged for me in embedded programming but I think it can be applied to quite a number of general networking situations e.g. when a communication partner fails. Assume we have an application logic (a program) running on a computer and a gadget connected to that computer via e.g. a serial interface like RS232. The gadget has a red/green/blue LED and a button which disables the LED. The LEDs color can be driven by software commands over the serial interface and the state (red/green/blue/off) is read back and causes a reaction in the application logic. Asynchronous behaviour of the application logic with regard to the LED color down to a certain delay (depending on the execution cycle of the application) is tolerated. What we essentially have is a resource (the LED) which can not be reserved and handled atomically by software because the (organic) user can at any time press the button to interfere/break the software attempt to switch the LED color. Stripping this example from its physical outfit I dare to say that we have two communicating state machines A (application logic) and G (gadget) where G executes state changes unbeknownst to A (and also the other way round, but this is not significant in our example) and only A can be modified at a reasonable price. A needs to see the reaction and state of G in one piece of information which may be (slightly) outdated but not inconsistent with respect to the short time window when this information was generated on the side of G. What I am looking for is a concise method to handle such a situation in embedded software (i.e. no layer/framework like CORBA etc. available). A programming technique which is able to map the complete behaviour of both participants on classical interfaces of a classical programming language (C in this case). To complicate matters (or rather, to generalize), a simple high frequency communication cycle of A to G and back (IOW: A is rapidly polling G) is out of focus because of technical restrictions (delay of serial com, A not always active, etc.). What I currently see as a general solution is: the application logic A as one thread of execution an adapter object (proxy) PG (presenting G inside the computer), together with the serial driver as another thread a communication object between the two (A and PG) which is transactionally safe to exchange The two execution contexts (threads) on the computer may be multi-core or just interrupt driven or tasks in an RTOS. The com object contains the following data: suspected state (written by A): effectively a member of the power set of states in G (in our case: red, green, blue, off, red_or_green, red_or_blue, red_or_off...etc.) command data (written by A): test_if_off, switch_to_red, switch_to_green, switch_to_blue operation status (written by PG): operation_pending, success, wrong_state, link_broken new state (written by PG): red, green, blue, off The idea of the com object is that A writes whichever (set of) state it thinks G is in, together with a command. (Example: suspected state="red_or_green", command: "switch_to_blue") Notice that the commands issued by A will not work if the user has switched off the LED and A needs to know this. PG will pick up such a com object and try to send the command to G, receive its answer (or a timeout) and set the operation status and new state accordingly. A will take back the oject once it is no longer at operation_pending and can react to the outcome. The com object could be separated of course (into two objects, one for each direction) but I think it is convenient in nearly all instances to have the command close to the result. I would like to have major flaws pointed out or hear an entirely different view on such a situation.

    Read the article

  • Understanding the Customer Form in Release 12 from an AR Perspective!!

    - by user793553
    Confused by the Customer Form in Release 12??  Read on, to get some insight into the evolution of this screen, and how it links in with Trading Community Architecture. Historically, the customer data model was owned by Oracle Receivables (AR).  However, as the data model changed and more complex relationships and attributes had to be tracked and monitored, the Trading Community Architecture (TCA) product was created.  All applications within the E-Business suite that require interaction with a customer integrate with TCA. Customer information is no longer stored in the individual applications but rather in a central repository/registry maintained within TCA.  It is important to understand the following entities/concepts stored in TCA: Party: A party is an entity with whom you can have a potential business relationship.  A party can be either a Person or an Organization.  The Party entity is completely independent of any business relationship; this means that a Party can exist even if you have no transactions with it.   The Party is the "umbrella" entity under which you capture all other attributes listed below. Customer: A customer is a party with whom you have an existing business relationship.  From an AR perspective, you can simplify the concepts by thinking of a Customer as a Party. This definition however does not apply to all other applications. In the Oracle Receivables Customer form, the information displayed at the Customer level is from TCA's Party information record. Customer Account (also called Account): An account contains information about how you transact business with a particular customer.  You can create multiple accounts for a customer.  When you create invoices and receipts you associate it to a particular Account of a Customer. Location: A Location is an address.  It is a point in space, typically identified by a street number, a street name, a city, a state or province, a country.  A location is independent of what it is used for - you do not associate a purpose to a location. Party Site: A Party Site is associated to a Party.  It is the location where a party is physically located.  When defining sites for a Party, only one can be an identifying address.  However, you can define other party sites associated to a party. You can define purposes/usage for Party Sites. Account Site: An Account Site is associated to a Customer Account. It is the location associated to the account you are transacting business with. You can define business purposes (also called site uses) for an Account site. Read more about the Customer Workbench in these notes: Doc ID 1436547.1 Oracle Receivables: Understanding the Customer Form in Release 12 Doc ID  1437866.1 Customer Form - Address: Troubleshooting, Known Issues and Patches Doc ID  1448442.1 Oracle Receivables (AR): Customer Workbench Information Center Do you find this type of blog entry useful?  Please add comments to let us know how we can help you more effectively.  Thank you!

    Read the article

  • How would I handle input with a Game Component?

    - by Aufziehvogel
    I am currently having problems from finding my way into the component-oriented XNA design. I read an overview over the general design pattern and googled a lot of XNA examples. However, they seem to be right on the opposite site. In the general design pattern, an object (my current player) is passed to InputComponent::update(Player). This means the class will know what to do and how this will affect the game (e.g. move person vs. scroll text in a menu). Yet, in XNA GameComponent::update(GameTime) is called automatically without a reference to the current player. The only XNA examples I found built some sort of higher-level Keyboard engine into the game component like this: class InputComponent: GameComponent { public void keyReleased(Keys); public void keyPressed(Keys); public bool keyDown(Keys); public void override update(GameTime gameTime) { // compare previous state with current state and // determine if released, pressed, down or nothing } } Some others went a bit further making it possible to use a Service Locator by a design like this: interface IInputComponent { public void downwardsMovement(Keys); public void upwardsMovement(Keys); public bool pausedGame(Keys); // determine which keys pressed and what that means // can be done for different inputs in different implementations public void override update(GameTime); } Yet, then I am wondering if it is possible to design an input class to resolve all possible situations. Like in a menu a mouse click can mean "click that button", but in game play it can mean "shoot that weapon". So if I am using such a modular design with game components for input, how much logic is to be put into the InputComponent / KeyboardComponent / GamepadComponent and where is the rest handled? What I had in mind, when I heard about Game Components and Service Locator in XNA was something like this: use Game Components to run the InputHandler automatically in the loop use Service Locator to be able to switch input at runtime (i.e. let player choose if he wants to use a gamepad or a keyboard; or which shall be player 1 and which player 2). However, now I cannot see how this can be done. First code example does not seem flexible enough, as on a game pad you could require some combination of buttons for something that is possible on keyboard with only one button or with the mouse) The second code example seems really hard to implement, because the InputComponent has to know in which context we are currently. Moreover, you could imagine your application to be multi-layered and let the key-stroke go through all layers to the bottom-layer which requires a different behaviour than the InputComponent would have guessed from the top-layer. The general design pattern with passing the Player to update() does not have a representation in XNA and I also cannot see how and where to decide which class should be passed to update(). At most time of course the player, but sometimes there could be menu items you have to or can click I see that the question in general is already dealt with here, but probably from a more elobate point-of-view. At least, I am not smart enough in game development to understand it. I am searching for a rather code-based example directly for XNA. And the answer there leaves (a noob like) me still alone in how the object that should receive the detected event is chosen. Like if I have a key-up event, should it go to the text box or to the player?

    Read the article

  • How to Speed Up Any Android Phone By Disabling Animations

    - by Chris Hoffman
    Android phones — and tablets, too — display animations when moving between apps and screens. These animations look very slick, but they waste time — especially on fast phones, which could switch between apps instantly if not for the animations. Disabling these animations will speed up navigating between different apps and interface screens on your phone, saving you time. You can also speed up the animations if you’d rather see them. Access the Developer Options Menu First, we’ll need to access the Developer Options menu. It’s hidden by default so Android users won’t stumble across it unless they’re actually looking for it. To access the Developer Options menu, open the Settings screen, scroll down to the bottom of the list, and tap the About phone or About tablet option. Scroll down to the Build number field and tap it repeatedly. Eventually, you’ll see a message appear saying “You are now a developer!”. The Developer options submenu now appears on the Settings screen. You’ll find it near the bottom of the list, just above the About phone or About tablet option. Disable Interface Animations Open the Developer Options screen and slide the switch at the top of the screen to On. This allows you to change the hidden options on this screen. If you ever want to re-enable the animations and revert your changes, all you have to do is slide the Developer Options switch back to Off. Scroll down to the Drawing section. You’ll find the three options we want here — Window animation scale, Transition animation scale, and Animator duration scale. Tap each option and set it to Animation off to disable the associated animations. If you’d like to speed up the animations without disabling them entirely, select the Animation .5x option instead. If you’re feeling really crazy, you can even select longer animation durations. You can make the animations take as much as ten times longer with the Animation 10x setting. The Animator duration scale option applies to the transition animation that appears when you tap the app drawer button on your home screen.  Your change here won’t take effect immediately — you’ll have to restart Android’s launcher after changing the Animator duration scale setting. To restart Android’s launcher, open the Settings screen, tap Apps, swipe over to the All category, scroll down, and tap the Launcher app. Tap the Force stop button to forcibly close the launcher, then tap your device’s home button to re-launch the launcher. Your app drawer will now open immediately, too. Now whenever you open an app or transition to a new screen, it will pop up as quickly as possible — no waiting for animations and wasting processing power rendering them. How much of a speed improvement you’ll see here depends on your Android device and how fast it is. On our Nexus 4, this change makes many apps appear and become usable instantly if they’re running in the background. If you have a slower device, you may have to wait a moment for apps to be usable. That’s one of the big reasons why Android and other operating systems use animations. Animations help paper over delays that can occur while the operating system loads the app.     

    Read the article

  • SharePoint: Numeric/Integer Site Column (Field) Types

    - by CharlesLee
    What field type should you use when creating number based site columns as part of a SharePoint feature? Windows SharePoint Services 3.0 provides you with an extensible and flexible method of developing and deploying Site Columns and Content Types (both of which are required for most SharePoint projects requiring list or library based data storage) via the feature framework (more on this in my next full article.) However there is an interesting behaviour when working with a column or field which is required to hold a number, which I thought I would blog about today. When creating Site Columns in the browser you get a nice rich UI in order to choose the properties of this field: However when you are recreating this as a feature defined in CAML (Collaborative Application Mark-up Language), which is a type of XML (more on this in my article) then you do not get such a rich experience.  You would need to add something like this to the element manifest defined in your feature: <Field SourceID="http://schemas.microsoft.com/sharepoint/3.0"        ID="{C272E927-3748-48db-8FC0-6C7B72A6D220}"        Group="My Site Columns"        Name="MyNumber"        DisplayName="My Number"        Type="Numeric"        Commas="FALSE"        Decimals="0"        Required="FALSE"        ReadOnly="FALSE"        Sealed="FALSE"        Hidden="FALSE" /> OK, its not as nice as the browser UI but I can deal with this. Hang on. Commas="FALSE" and yet for my number 1234 I get 1,234.  That is not what I wanted or expected.  What gives? The answer lies in the difference between a type of "Numeric" which is an implementation of the SPFieldNumber class and "Integer" which does not correspond to a given SPField class but rather represents a positive or negative integer.  The numeric type does not respect the settings of Commas or NegativeFormat (which defines how to display negative numbers.)  So we can set the Type to Integer and we are good to go.  Yes? Sadly no! You will notice at this point that if you deploy your site column into SharePoint something has gone wrong.  Your site column is not listed in the Site Column Gallery.  The deployment must have failed then?  But no, a quick look at the site columns via the API reveals that the column is there.  What new evil is this?  Unfortunately the base type for integer fields has this lovely attribute set on it: UserCreatable = FALSE So WSS 3.0 accordingly hides your field in the gallery as you cannot create fields of this type. However! You can use them in content types just like any other field (except not in the browser UI), and if you add them to the content type as part of your feature then they will show up in the UI as a field on that content type.  Most of the time you are not going to be too concerned that your site columns are not listed in the gallery as you will know that they are there and that they are still useable. So not as bad as you thought after all.  Just a little quirky.  But that is SharePoint for you.

    Read the article

  • Friday Tips #3

    - by Chris Kawalek
    Even though yesterday was Thanksgiving here in the US, we still have a Friday tip for those of you around your computers today. In fact, we have two! The first one came in last week via our #AskOracleVirtualization Twitter hashtag. The tweet has disappeared into the ether now, but we remember the gist, so here it is: Question: Will there be an Oracle Virtual Desktop Client for Android? Answer by our desktop virtualization product development team: We are looking at Android as a supported platform for future releases. Question: How can I make a Sun Ray Client automatically connect to a virtual machine? Answer by Rick Butland, Principal Sales Consultant, Oracle Desktop Virtualization: Someone recently asked how they can assign VM’s to specific Sun Ray Desktop Units (“DTU’s”) without any user interfaction being required, without the “Desktop Selector” being displayed, or any User Directory.  That is, they wanted each Sun Ray to power on and immediately connect to a pre-assigned Solaris VM.   This can be achieved by using “tokens” for user assignment – that is, the tokens found on Smart Cards, DTU’s, or OVDC clients can be used in place of user credentials.  Note, however, that mixing “token-only” assignments and “User Directories” in the same VDI Center won’t work.   Much of this procedure is covered in the documentation, particularly here. But it can useful to have everything in one place, “cookbook-style”:  1. Create the “token-only” directory type: From the VDI administration interface, select:  “Settings”, “Company”, “New”, select the “None” radio button, and click “Next.” Enter a name for the new “Company”, and click “Next”, then “Finish.” 2. Create Desktop Providers, Pools, and VM’s as appropriate. 3. Access the Sun Ray administration interface at http://servername:1660 and login using “root” credentials, and access the token-id’s you wish to use for assignment.  If you’re using DTU tokens rather than Smart Card tokens, these can be found under the “Tokens” tab, and “Search-ing” using the “Currently Used Tokens” tab.  DTU’s can be identified by the prefix “psuedo.”   For example: 4. Copy/paste this token into the VDI administrative interface, by selecting “Users”, “New”, and pasting in the token ID, and click “OK” - for example: 5. Assign the token (DTU) to a desktop, that is, in the VDI Admin Gui, select “Pool”, “Desktop”, select the VM, and click "Assign" and select the token you want, for example: In addition to assigning tokens to desktops, you'll need to bypass the login screen.  To do this, you need to do two things:  1.  Disable VDI client authentication with:  /opt/SUNWvda/sbin/vda settings-setprops -p clientauthentication=Disabled 2. Disable the VDI login screen – to do this,  add a kiosk argument of "-n" to the Sun Ray kiosk arguments screen.   You set this on the Sun Ray administration page - "Advanced", "Kiosk Mode", "Edit", and add the “-n” option to the arguments screen, for example: 3.  Restart both the Sun Ray and VDI services: # /opt/SUNWut/sbin/utstart –c # /opt/SUNWvda/sbin/vda-service restart Remember, if you have a question for us, please post on Twitter with our hashtag (again, it's #AskOracleVirtualization), and we'll try to answer it if we can. See you next time!

    Read the article

  • Going by the eBook

    - by Tony Davis
    The book and magazine publishing world is rapidly going digital, and the industry is faced with making drastic changes to their ways of doing business. The sudden take-up of digital readers by the book-buying public has surprised even the most technological-savvy of the industry. Printed books just aren't selling like they did. In contrast, eBooks are doing well. The ePub file format is the standard around which all publishers are converging. ePub is a standard for formatting book content, so that it can be reflowed for various devices, with their widely differing screen-sizes, and can be read offline. If you unzip an ePub file, you'll find familiar formats such as XML, XHTML and CSS. This is both a blessing and a curse. Whilst it is good to be able to use familiar technologies that have been developed to a level of considerable sophistication, it doesn't get us all the way to producing a viable publication. XHTML is a page-description language, not a book-description language, as we soon found out during our initial experiments, when trying to specify headers, footers, indexes and chaptering. As a result, it is difficult to predict how any particular eBook application will decide to render a book. There isn't even a consensus as to how the cover image is specified. All of this is awkward for the publisher. Each book must be created and revised in a form from which can be generated a whole range of 'printed media', from print books, to Mobi for kindles, ePub for most Tablets and SmartPhones, HTML for excerpted chapters on websites, and a plethora of other formats for other eBook readers, each with its own idiosyncrasies. In theory, if we can get our content into a clean, semantic XML form, such as DOCBOOKS, we can, from there, after every revision, perform a series of relatively simple XSLT transformations to output anything from a HTML article, to an ePub file for reading on an iPad, to an ICML file (an XML-based file format supported by the InDesign tool), ready for print publication. As always, however, the task looks bigger the closer you get to the detail. On the way to the utopian world of an XML-based book format that encompasses all the diverse requirements of the different publication media, ePub looks like a reasonable format to adopt. Its forthcoming support for HTML 5 and CSS 3, with ePub 3.0, means that features, such as widow-and-orphan controls, multi-column flow and multi-media graphics can be incorporated into eBooks. This starts to make it possible to build an "app-like" experience into the eBook and to free publishers to think of putting context before container; to think of what content is required, be it graphical, textual or audio, from the point of view of the user, rather than what's possible in a given, traditional book "Container". In the meantime, there is a gap between what publishers require and what current technology can provide and, of course building this app-like experience is far from plain sailing. Real portability between devices is still a big challenge, and achieving the sort of wizardry seen in the likes of Theodore Grey's "Elements" eBook will require some serious device-specific programming skills. Cheers, Tony.

    Read the article

< Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >