double submit prevention - Page 415

What developer conferences are you going to this year?

- by mbcrump

This short list is what I consider to be the “cream-of-the-crop” in developer conferences. This is also a list of the conferences that I plan on attending in 2011. If you feel your conference is just as good, then shoot me an email at [michael[at]michaelcrump[dot]net, and if possible I will check it out. In-Person Event Las Vegas on April 18th-22nd, 2011 Redmond on October 17th-21st, 2011 Orlando on December 5th-9th, 2011 Visual Studio Live – I attended this event in November of last year and blogged about my experience. I am also planning on going back to the Orlando session in December of this year. So what did I like the most about this event? Being able to interact one-on-one with a majority of the speakers. If you read my blog post then you will see a list of the speakers that I met up with. I also made a lot of great connections with other professional developers all over the world. They are having an event in Las Vegas on April 18th-22nd. I noticed at this event that they have added a new track on mobile. Being a big fan of mobile, I feel that this is a great move. They also have a great selection for Silverlight Developers including Billy Hollis and Rocky Lhotka. For the full lineup of conference tracks, sessions and speakers visit http://bit.ly/VSLiveTrks. If you are interested in this then you can register here by February 16th. I must add that you can save $300 bucks by getting the early-bird special. Virtual Conference SSWUG (DBTechCon) - holds the largest virtual conference in the information technology industry. It is also special to me because they selected a majority of my Silverlight content for the April conference. No traveling fees and all of the sessions are recorded so you can watch them on-demand for $189 bucks (early-bird special). For the entire speaker list then click here. The session list has also been published. If you are interested in this then you can register here. In-Person Event Knoxville, TN on June 3rd/4th 2011. Codestock.org – If you live in the South then you have heard of CodeStock. To my knowledge, they have only had 3 events so far and they were a huge success. It was such a success that after the last event, everyone was telling me how good it was and how much they enjoyed it. They currently have a call for speakers going on right now, so if you have sessions then be sure to submit yours. So, what makes them stand out? Well for starters Michael Neal (organizer) developed an open API so conference attendees could build their own apps for the sessions. They also encouraged their speakers to go to other sessions instead of stay in a “speaker-room”. Another cool feature is that they are uploading videos from the conference so everyone can benefit. They are currently looking for sponsorship, so help out if you can. In-Person Event Redmond, WA on October 28/29 2011 *NOT 100% SURE AT THIS POINT* PDC 11 – OK, so the logo should be pdc11 but its not out yet. This event is located on Microsoft’s campus in Redmond, WA. It is probably one of the most well known conferences for developers to attend. One of the big perks from this event is that you typically come away with free stuff. In 2010 they gave away Windows 7 Phones. I remember years earlier they gave away laptops. This of course isn’t the only reason to go, you may get to tour the Microsoft campus. Since pdc is a huge event, you can view all the events for free. Mike Taulty created a nice Silverlight application that consumes the OData feed. You can download it here. If everything goes as planned, I will be at all of these events. If you plan on going then send me a tweet and we will do lunch or dinner. I love meeting new developers and talking .net. Subscribe to my feed

Read the article

#OOW 2012 : IaaS, Private Cloud, Multitenant Database, and X3H2M2

- by Eric Bezille

The title of this post is a summary of the 4 announcements made by Larry Ellison today, during the opening session of Oracle Open World 2012... To know what's behind X3H2M2, you will have to wait a little, as I will go in order, beginning with the IaaS - Infrastructure as a Service - announcement. Oracle IaaS goes Public... and Private... Starting in 2004 with Fusion development, Oracle Cloud was launch last year to provide not only SaaS Application, based on standard development, but also the underlying PaaS, required to build the specifics, and required interconnections between applications, in and outside of the Cloud. Still, to cover the end-to-end Cloud Services spectrum, we had to provide an Infrastructure as a Service, leveraging our Servers, Storage, OS, and Virtualization Technologies, all "Engineered Together". This Cloud Infrastructure, was already available for our customers to build rapidly their own Private Cloud either on SPARC/Solaris or x86/Linux... The second announcement made today bring that proposition a big step further : for cautious customers (like Banks, or sensible industries) who would like to benefits from the Cloud value of "as a Service", but don't want their Data out in the Cloud... We propose to them to operate the same systems, Exadata, Exalogic & SuperCluster, that are providing our Public Cloud Infrastructure, behind their firewall, in a Private Cloud model. Oracle 12c Multitenant Database This is also a major announcement made today, on what's coming with Oracle Database 12c : the ability to consolidate multiple databases with no extra additional cost especially in terms of memory needed on the server node, which is often THE consolidation limiting factor. The principle could be compare to Solaris Zones, where, you will have a Database Container, who is "owning" the memory and Database background processes, and "Pluggable" Database in this Database Container. This particular feature is a strong compelling event to evaluate rapidly Oracle Database 12c once it will be available, as this is major step forward into true Database consolidation with Multitenancy on a shared (optimized) infrastructure. X3H2M2, enabling the new Exadata X3 in-Memory Database Here we are : X3H2M2 stands for X3 (the new version of Exadata announced also today) Heuristic Hierarchical Mass Memory, providing the capability to keep most if not all the Data in the memory cache hierarchy. Of course, this is the major software enhancement of the new X3 Exadata machine, but as this is a software, our current customers would be able to benefit from it on their existing systems by upgrading to the new release. But that' not the only thing that we did with X3, at the same time we have upgraded everything : the CPUs, adding more cores per server node (16 vs. 12, with the arrival of Intel E5 / Sandy Bridge), the memory with 512GB memory as well per node, and the new Flash Fire card, bringing now up to 22 TB of Flash cache. All of this 4TB of RAM + 22TB of Flash being use cleverly not only for read but also for write by the X3H2M2 algorithm... making a very big difference compare to traditional storage flash extension. But what does those extra performances brings to you on an already very efficient system: double your performances compare to the fastest storage array on the market today (including flash) and divide you storage price x10 at the same time... Something to consider closely this days... Especially that we also announced the availability of a new Exadata X3-2 8th rack : a good starting point. As you have seen a major opening for this year again with true innovation. But that was not the only thing that we saw today, as before Larry's talk, Fujitsu did introduce more in deep the up coming new SPARC processor, that they are co-developing with us. And as such Andrew Mendelsohn - Senior Vice President Database Server Technologies came on stage to explain that the next step after I/O optimization for Database with Exadata, was to accelerate the Database at execution level by bringing functions in the SPARC processor silicium. All in all, to process more and more Data... The big theme of the day... and of the Oracle User Groups Conferences that were also happening today and where I had the opportunity to attend some interesting sessions on practical use cases of Big Data one in Finances and Fraud profiling and the other one on practical deployment of Oracle Exalytics for Data Analytics. In conclusion, one picture to try to size Oracle Open World ... and you can understand why, with such a rich content... and this only the first day !

Read the article

To refund or not to refund this client?

- by Mahalia Samuels

I'd really appreciate your advice on an ongoing project. I presented my client with a proposal and design samples which he approved, and he paid in full instead of the 50% upfront deposit as I'd given him a generous discount. He was then slow in furnishing me with some of the content, but once we did, he expected the website to be finished immediately which was not possible. Because he needed it done urgently, we agreed to try to get it done about 10 working days after the content was provided, but the developer who was helping me let me down. The next week, I completed the website myself and uploaded it to the server on a Friday afternoon. He then calls and texts me on following Sunday while I'm at church to say it's not online (there was probably a problem with his browser). The next morning, I received an email from him demanding a full refund within two days because he couldn't see the website (even though it was live, and I tested it on multiple browsers, a different computer and my phone), and he called me shouting at me because he couldn't access it. Finally when he was able to access it, he was unhappy with a certain detail regarding the slideshow which I began fixing and which was done the next day. He then referred me to another website and said he wanted it to look similar but not identical to it in terms of the layout. He also now wanted to add more features which were not in the original design. I got a designer to work on a new design which I sent to him for review, which if approved would be completed by 15 October, and he approved it last Thursday. He then called me yesterday to say that he wanted to change the design - he only approved it out of impatience. He now wants the website to be more similar to the other website he referred me to and he wants it done before the 15th! Then, he says to me that other people have done websites for him in three days - website's he's complained to me about for lacking dimension because they were just premium themes, whereas we'd designed and coded from scratch. I'm thinking of finishing the website but refunding him in full (or at least the refundable 50%) less domain registration and other non-refundable amounts, just to avoid further escalation of this matter and having him call me next week and say he wants to change it again. These are the applicable terms and conditions as laid out in the agreement: Total amount due for this project is Amount A. Client shall pay Consultant a deposit of Amount B (50% of total amount due for project) in advance before any work commences on the Project. The balance is due within 7 working days of completion of project. Deposit is non-refundable. Should client opt to host elsewhere, applicable transferral fee of Amount C will apply. Estimated project completion time frame is 14 to 30 days from the date Client furnishes Consultant with Brief and all other required media and data, provided that Client has made payment to secure the project. Consultant will make every effort to meet agreed upon due dates. The Client should be aware that failure to submit required information or materials, or last minute changes and excessive changes may cause subsequent delays. Client delays could result in significant delays in delivery of finished work. Major changes in client input or direction or brief will be charged at normal rates. Any work the Client wishes Consultant to create, which is not specified in the attached Proposal will be considered an additional service. Client agrees to pay Consultant for any additional expenses or additional services not included in the attached quotation and proposal if requested by the Client. Web design credit in the name of the Consultant, and link to Consultant’s website shall be placed on the footer of the final Website. Either party may terminate this Agreement by giving 7 days written notice to the other of such termination. In the event that Work is postponed or terminated at the request of the Client, Consultant shall have the right to bill pro rata at full rates for work completed through the date of that request, while reserving all rights under this Agreement. If additional payment is due, this shall be payable within seven days of the Client's written notification to stop work. In the event of termination, the Client shall also pay any expenses incurred by Consultant and the Consultant shall own all rights to the Work. Advice please?

Read the article

How to Implement Single Sign-On between Websites

- by hmloo

Introduction Single sign-on (SSO) is a way to control access to multiple related but independent systems, a user only needs to log in once and gains access to all other systems. a lot of commercial systems that provide Single sign-on solution and you can also choose some open source solutions like Opensso, CAS etc. both of them use centralized authentication and provide more robust authentication mechanism, but if each system has its own authentication mechanism, how do we provide a seamless transition between them. Here I will show you the case. How it Works The method we’ll use is based on a secret key shared between the sites. Origin site has a method to build up a hashed authentication token with some other parameters and redirect the user to the target site. variables Status Description ssoEncode required hash(ssoSharedSecret + , + ssoTime + , + ssoUserName) ssoTime required timestamp with format YYYYMMDDHHMMSS used to prevent playback attacks ssoUserName required unique username; required when a user is logged in Note : The variables will be sent via POST for security reasons Building a Single Sign-On Solution Origin Site has function to 1. Create the URL for your Request. 2. Generate required authentication parameters 3. Redirect to target site. using System; using System.Web.Security; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { string postbackUrl = "http://www.targetsite.com/sso.aspx"; string ssoTime = DateTime.Now.ToString("yyyyMMddHHmmss"); string ssoUserName = User.Identity.Name; string ssoSharedSecret = "58ag;ai76"; // get this from config or similar string ssoHash = FormsAuthentication.HashPasswordForStoringInConfigFile(string.Format("{0},{1},{2}", ssoSharedSecret, ssoTime, ssoUserName), "md5"); string value = string.Format("{0}:{1},{2}", ssoHash,ssoTime, ssoUserName); Response.Clear(); StringBuilder sb = new StringBuilder(); sb.Append("<html>"); sb.AppendFormat(@"<body onload='document.forms[""form""].submit()'>"); sb.AppendFormat("<form name='form' action='{0}' method='post'>", postbackUrl); sb.AppendFormat("<input type='hidden' name='t' value='{0}'>", value); sb.Append("</form>"); sb.Append("</body>"); sb.Append("</html>"); Response.Write(sb.ToString()); Response.End(); } } Target Site has function to 1. Get authentication parameters. 2. Validate the parameters with shared secret. 3. If the user is valid, then do authenticate and redirect to target page. 4. If the user is invalid, then show errors and return. using System; using System.Web.Security; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { if (User.Identity.IsAuthenticated) { Response.Redirect("~/Default.aspx"); } } if (Request.Params.Get("t") != null) { string ticket = Request.Params.Get("t"); char[] delimiters = new char[] { ':', ',' }; string[] ssoVariable = ticket.Split(delimiters, StringSplitOptions.None); string ssoHash = ssoVariable[0]; string ssoTime = ssoVariable[1]; string ssoUserName = ssoVariable[2]; DateTime appTime = DateTime.MinValue; int offsetTime = 60; // get this from config or similar try { appTime = DateTime.ParseExact(ssoTime, "yyyyMMddHHmmss", null); } catch { //show error return; } if (Math.Abs(appTime.Subtract(DateTime.Now).TotalSeconds) > offsetTime) { //show error return; } bool isValid = false; string ssoSharedSecret = "58ag;ai76"; // get this from config or similar string hash = FormsAuthentication.HashPasswordForStoringInConfigFile(string.Format("{0},{1},{2}", ssoSharedSecret, ssoTime, ssoUserName), "md5"); if (string.Compare(ssoHash, hash, true) == 0) { if (Math.Abs(appTime.Subtract(DateTime.Now).TotalSeconds) > offsetTime) { //show error return; } else { isValid = true; } } if (isValid) { //Do authenticate; } else { //show error return; } } else { //show error } } } Summary This is a very simple and basic SSO solution, and its main advantage is its simplicity, only needs to add a single page to do SSO authentication, do not need to modify the existing system infrastructure.

Read the article

Speakers, Please Check Your Time

- by AjarnMark

Woodrow Wilson was once asked how long it would take him to prepare for a 10 minute speech. He replied "Two weeks". He was then asked how long it would take for a 1 hour speech. "One week", he replied. 2 hour speech? "I'm ready right now," he replied. Whether that is a true story or an urban legend, I don’t really know, but either way, it is a poignant reminder for all speakers, and particularly apropos this week leading up to the PASS Community Summit. (Cross-posted to the PASS Professional Development Virtual Chapter blog #PASSProfDev.) What’s the point of that story? Simply this…if you have plenty of time to do your presentation, you don’t need to prepare much because it is easy to throw in more and more material to stretch out to your allotted time. But if you are on a tight time constraint, then it will take significant preparation to distill your talk down to only the essential points. I have attended seven of the last eight North American Summit events, and every one of them has been fantastic. The speakers are great, the material is timely and relevant, and the networking opportunities are awesome. And every year, there is one little thing that just bugs me…speakers going over their allotted time. Why does it bother me so? Well, if you look at a typical schedule for a Summit, you’ll see that there are six or more sessions going on at the same time, and only 15 minutes to move from one to another. If you’re trying to maximize your training dollar by attending something during every session time slot, and you don’t want to be the last guy trying to squeeze into the middle of the row, then those 15 minutes can be critical. All the more so if you need to stop and use the bathroom or if you have to hike to the opposite end of the convention center. It is really a bad position to find yourself having to choose between learning the last key points of Speaker A who is going over time, and getting over to Speaker B on time so you don’t miss her key opening remarks. And frankly, I think it is just rude. Yes, the speakers are the function, after all they are bringing the content that the rest of us are paying to learn. But it is also an honor to be given the opportunity to speak at a conference like this, and no one speaker is so important that the conference would be a disaster without him. Speakers know when they submit their abstract, long before the conference, how much time they will have. It has been the same pattern at the Summit for at least the last eight years. Program Sessions are 75 minutes long. Some speakers who have a good track record, and meet other qualifying criteria, are extended an invitation to present a Spotlight Session which is 90 minutes (a 20% increase). So there really is no excuse. It’s not like you were promised a 2-hour segment and then discovered when you got here that it was only 75 minutes. In fact, it’s not like PASS advertised 90-minute sessions for everyone and then a select few were cut back to only 75. As a speaker, you know well before you get here which type of session you are doing and how long it is, so as a professional, you should plan accordingly. Now you might think that this only happens to rookies, but I’ll tell you that some of the worst offenders are big-name veterans who draw huge attendance numbers for their sessions. Some attendees blow this off as, “Hey, it’s so-and-so, and I’d stay here for hours and listen to him/her talk.” To which I would reply, “Then they should have submitted for a pre- or post-conference day-long seminar instead, but don’t try to squeeze your day-long talk into a 90-minute session.” Now I don’t really believe that these speakers are being malicious or just selfishly trying to extend their time in the spotlight. I think that most of them are merely being undisciplined and did not trim their presentation sufficiently, or allowed themselves to get off-track (often in a generous attempt to help someone in the audience with a question or problem that really should have been noted for further discussion after the session). So here is my recommendation…my plea, even. TRIM THE FAT! Now. Before it’s too late. Before you even get on the airplane, take a long, hard look at your presentation and eliminate some of the points that you originally thought you had to make, but in reality are not truly crucial to your main topic. Delete a few slides. Test your demos and have them already scripted rather than typing them during your talk. It is better to cut out too much and end up with plenty of time at the end for Questions & Answers. And you can always keep some notes on the stuff that you cut out so that you could fill it back in at the end as bonus material if you really do end up with a whole bunch of time on your hands. But I don’t think you will. And if you do, that will look even better to the audience as it will look like you’re giving them something extra that not every audience gets. And they will thank you for that.

Read the article

Right-Time Retail Part 2

- by David Dorf

This is part two of the three-part series. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Right-Time Integration Of course these real-time enabling technologies are only as good as the systems that utilize them, and it only takes one bottleneck to slow everyone else down. What good is an immediate stock-out notification if the supply chain can’t react until tomorrow? Since being formed in 2006, Oracle Retail has been not only adding more integrations between systems, but also modernizing integrations for appropriate speed. Notice I tossed in the word “appropriate.” Not everything needs to be real-time – again, we’re talking about Right-Time Retail. The speed of data capture, analysis, and execution must be synchronized or you’re wasting effort. Unfortunately, there isn’t an enterprise-wide dial that you can crank-up for your estate. You’ll need to improve things piecemeal, with people and processes as limiting factors while choosing the appropriate types of integrations. There are three integration styles we see in the retail industry. First is batch. I know, the word “batch” just sounds slow, but this pattern is less about velocity and more about volume. When there are large amounts of data to be moved, you’ll want to use batch processes. Our technology of choice here is Oracle Data Integrator (ODI), which provides a fast version of Extract-Transform-Load (ETL). Instead of the three-step process, the load and transform steps are combined to save time. ODI is a key technology for moving data into Retail Analytics where we can apply science. Performing analytics on each sale as it occurs doesn’t make any sense, so we batch up a statistically significant amount and submit all at once. The second style is fire-and-forget. For some types of data, we want the data to arrive ASAP but immediacy is not necessary. Speed is less important than guaranteed delivery, so we use message-oriented middleware available in both Weblogic and the Oracle database. For example, Point-of-Service transactions are queued for delivery to Central Office at corporate. If the network is offline, those transactions remain in the queue and will be delivered when the network returns. Transactions cannot be lost and they must be delivered in order. (Ever tried processing a return before the sale?) To enhance the standard queues, we offer the Retail Integration Bus (RIB) to help the management and monitoring of fire-and-forget messaging in the enterprise. The third style is request-response and is most commonly implemented as Web services. This is a synchronous message where the sender waits for a response. In this situation, the volume of data is small, guaranteed delivery is not necessary, but speed is very important. Examples include the website checking inventory, a price lookup, or processing a credit card authorization. The Oracle Service Bus (OSB) typically handles the routing of such messages, and we’ve enhanced its abilities with the Retail Service Backbone (RSB). To better understand these integration patterns and where they apply within the retail enterprise, we’re providing the Retail Reference Library (RRL) at no charge to Oracle Retail customers. The library is composed of a large number of industry business processes, including those necessary to support Commerce Anywhere, as well as detailed architectural diagrams. These diagrams allow implementers to understand the systems involved in integrations and the specific data payloads. Furthermore, with our upcoming release we’ll be providing a new tool called the Retail Integration Console (RIC) that allows IT to monitor and manage integrations from a single point. Using RIC, retailers can quickly discern where integration activity is occurring, volume statistics, average response times, and errors. The dashboards provide the ability to dive down into the architecture documentation to gather information all the way down to the specific payload. Retailers that want real-time integrations will also need real-time monitoring of those integrations to ensure service-level agreements are maintained. Part 3 looks at marketing.

Read the article

Understanding the 'High Performance' meaning in Extreme Transaction Processing

- by kyap

Despite my previous blogs entries on SOA/BPM and Identity Management, the domain where I'm the most passionated is definitely the Extreme Transaction Processing, commonly called XTP.I came across XTP back to 2007 while I was still FMW Product Manager in EMEA. At that time Oracle acquired a company called Tangosol, which owned an unique product called Coherence that we renamed to Oracle Coherence. Beside this innovative renaming of the product, to be honest, I didn't know much about it, except being a "distributed in-memory cache for Extreme Transaction Processing"... not very helpful still.In general when people doesn't fully understand a technology or a concept, they tend to find some shortcuts, either correct or not, to justify their lack-of understanding... and of course I was part of this category of individuals. And the shortcut was "Oracle Coherence Cache helps to improve Performance". Excellent marketing slogan... but not very meaningful still. By chance I was able to get away quickly from that group in July 2007* at Thames Valley Park (UK), after I attended one of the most interesting workshops, in my 10 years career in Oracle, delivered by Brian Oliver. The biggest mistake I made was to assume that performance improvement with Coherence was related to the response time. Which can be considered as legitimus at that time, because after-all caches help to reduce latency on cached data access, hence reduce the response-time. But like all caches, you need to define caching and expiration policies, thinking about the cache-missed strategy, and most of the time you have to re-write partially your application in order to work with the cache. At a result, the expected benefit vanishes... so, not very useful then?The key mistake I made was my perception or obsession on how performance improvement should be driven, but I strongly believe this is still a common problem to most of the developers. In fact we all know the that the performance of a system is generally presented by the Capacity (or Throughput), with the 2 important dimensions Speed (response-time) and Volume (load) :Capacity (TPS) = Volume (T) / Speed (S)To increase the Capacity, we can either reduce the Speed(in terms of response-time), or to increase the Volume. However we tend to only focus on reducing the Speed dimension, perhaps it is more concrete and tangible to measure, and nicer to present to our management because there's a direct impact onto the end-users experience. On the other hand, we assume the Volume can be addressed by the underlying hardware or software stack, so if we need more capacity (scale out), we just add more hardware or software. Unfortunately, the reality proves that IT is never as ideal as we assume...The challenge with Speed improvement approach is that it is generally difficult and costly to make things already fast... faster. And by adding Coherence will not necessarily help either. Even though we manage to do so, the Capacity can not increase forever because... the Speed can be influenced by the Volume. For all system, we always have a performance illustration as follow: In all traditional system, the increase of Volume (Transaction) will also increase the Speed (Response-Time) as some point. The reason is simple: most of the time the Application logics were not designed to scale. As an example, if you have a while-loop in your application, it is natural to conceive that parsing 200 entries will require double execution-time compared to 100 entries. If you need to "Speed-up" the execution, you can only upgrade your hardware (scale-up) with faster CPU and/or network to reduce network latency. It is technically limited and economically inefficient. And this is exactly where XTP and Coherence kick in. The primary objective of XTP is about designing applications which can scale-out for increasing the Volume, by applying coding techniques to keep the execution-time as constant as possible, independently of the number of runtime data being manipulated. It is actually not just about having an application running as fast as possible, but about having a much more predictable system, with constant response-time and linearly scale, so we can easily increase throughput by adding more hardwares in parallel. It is in general combined with the Low Latency Programming model, where we tried to optimize the network usage as much as possible, either from the programmatic angle (less network-hoops to complete a task), and/or from a hardware angle (faster network equipments). In this picture, Oracle Coherence can be considered as software-level XTP enabler, via the Distributed-Cache because it can guarantee: - Constant Data Objects access time, independently from the number of Objects and the Coherence Cluster size - Data Objects Distribution by Affinity for in-memory data grouping - In-place Data Processing for parallel executionTo summarize, Oracle Coherence is indeed useful to improve your application performance, just not in the way we commonly think. It's not about the Speed itself, but about the overall Capacity with Extreme Load while keeping consistant Speed. In the future I will keep adding new blog entries around this topic, with some sample codes experiences sharing that I capture in the last few years. In the meanwhile if you want to know more how Oracle Coherence, I strongly suggest you to start with checking how our worldwide customers are using Oracle Coherence first, then you can start playing with the product through our tutorial.Have Fun !

Read the article

Is your dream an international experience?

- by Maria Sandu

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Studying in Poland, having two summer jobs in England, doing one internship in India, working in Thailand for half a year and now working in Prague. Does it seem an adventure? Well it is and I will tell you how I came to have this international experience. Dzien Dobry! My name is Wojciech Jurojc, I am Polish and I am currently a Business Development Consultant within Oracle, based in Prague. I joined Oracle on the 1st of August 2011. I graduated in 2010 and obtained 2 Masters Degrees in Political Science and Economics. I would like to tell you more about my past and how I joined Oracle. In 2005 I began studying at the Faculty of Political Sciences Gdansk University. In 2008, I obtained a Bachelors Degree. During these three years I had the opportunity to go to England twice, where I worked as a Bartender, first in Blackpool and then in Manchester. This allowed me to improve my language skills and become more confident. In the meantime, I joined the International Student Organization-AIESEC, where I was organized conferences and conducted student projects. Also I met a mass of interesting people from around the world. After graduation in 2008, I was able to get an Internship within a big company in Poland. I worked there as an Intern in the Purchase Department. That was my first adventure within a corporate environment. I learnt a lot about purchasing processes and negotiations. In September 2008, I started studying two Masters Faculties: Political Science and Economics. It was very difficult, but it was not impossible. Over the next two years of studying I was able to go on a three month internship to India where I worked as a Marketing Assistant in an NGO. I was travelling around northern India and did presentations to the academic community about green energy and environmental projects. I had the opportunity to visit Nepal and walked in the Himalayas. That was a huge experience as well as a cultural shock. It taught me how to deal with many problems and to appreciate what I have. At the end of 2009 I was working as a Marketing Assistant for a Leasing company, where I learnt useful sales knowledge and improved my objection handling skills. In July 2010, I graduated with a double Masters and found a job in Thailand as Sales Representative in an IT company. I worked in Thailand until the end of January 2011. Besides that, I was working in an International company with interesting people and I had the opportunity to travel around Thailand and visit Cambodia. After this adventure I started looking for jobs in Europe where I could further develop my sales skills. I found Oracle and I don’t regret this decision which I made. I am currently working in Prague in an international Hardware team and I know that is not the end of my adventures. At this moment, I am working in a team of 12 members. Ten of them are based in Prague and 2 others are based in Russia. We come from different countries such as: Czech Republic, Russia, Ukraine, Turkey, Slovakia and Kazakhstan. I am working on the Polish market, cooperating with our Hardware customers and partners. What do I enjoy the most about my job? I enjoy every challenge that I face in my daily activities as there are always new experiences for me and new things that I learn. As part of Oracle, I gain international exposure and therefore more career opportunities to explore. I have planned my next step for the career path I dream of and I am currently working on it. I recommend you check our Career Page if you’re looking for an international career. If you want to find out more about our job opportunities, follow us on https://campus.oracle.com .

Read the article

Thinking differently about BI delivery

- by jamiet

My day job involves implementing Business Intelligence (BI) solutions which, as I have said before, is simply about giving people the information they need to do their jobs. I’m always interested in learning about new ways of achieving that aim and that is my motivation for writing blog entries that are not concerned with SQL or SQL Server per se. Implementing BI systems usually involves hacking together a bunch third party products with some in-house “glue” and delivering information using some shiny, expensive web-based front-end tool; the list of vendors that supply such tools is big and ever-growing. No doubt these tools have their place and of late I have started to wonder whether they can be supplemented with different ways of delivering information. The problem I have with these separate web-based tools is exactly that – they are separate web-based tools. What’s the problem with that you might ask? I’ll explain! They force the information worker to go somewhere unfamiliar in order to get the information they need to do their jobs. Would it not be better if we could deliver information into the tools that those information workers are already using and not force them to go somewhere else? I look at the rise of blogging over recent years and I realise that what made them popular is that people can subscribe to RSS feeds and have information pushed to them in their tool of choice rather than them having to go and find the information for themselves in a tool that has been foisted upon them. Would it not be a good idea to adopt the principle of subscription for the benefit of delivering BI information as well? I think it would and in the rest of this blog entry I’ll outline such a scenario where the power of subscription could be used to enhance the delivery of information to information workers. Typical questions that information workers ask might be: What are my year-on-year sales figures? What was my footfall yesterday? How many widgets have I sold so far today? Each of those questions includes a time element and that shouldn’t surprise us, any BI system that I have worked on includes the dimension of time. Now, what do people use to view and organise their time-oriented information? Its not a trick question, they use a calendar and in the enterprise space more often than not that calendar is managed using Outlook. Given then that information workers are already looking at their calendar in Outlook anyway would it not make sense then to deliver information into that same calendar? Of course it would. Calendars are a great way of visualising information such as sales figures. Observe: Just in this single screenshot I have managed to convey a multitude of information. The information worker can see, at a glance, information about hourly/daily/weekly/monthly sales and, moreover, he/she is viewing that information right inside the tool that they use every day. There is no effort on the part of him/her, the information just appears hour after hour, day after day. Taking the idea further, each one of those calendar items could be a mini-dashboard in its own right. Double-clicking on an item could show a plethora of other information about that time slot such as breaking the sales down per region or year-over-year comparisons. Perhaps the title could employ a sparkline? Loads of possibilities. The point is that calendars are a completely natural way to visualise information; we should make more use of them! The real beauty of delivering information using calendars for us BI developers is that it should be so easy. In the case of Outlook we don’t need to write complicated VBA code that can go and manipulate a person’s calendar, simply publishing data in a format that Outlook can understand is sufficient and happily such formats already exist; iCalendar is the accepted format and the even more flexible xCalendar is hopefully on its way as well. I’d like to make one last point and this one is with my SQL Server hat on. Reporting Services 2008 R2 introduced the ability to publish data as subscribable Atom feeds so it seems logical that it could also be a vehicle for delivering calendar feeds too. If you think this would be a good idea go and vote for it at Publish data as iCalendar feeds and please please please add some comments (especially if you vote it down). Work smarter, not harder! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

Lessons learnt in implementing Scrum in a Large Organization that has traditional values

- by MarkPearl

I recently had the experience of being involved in a “test” scrum implementation in a large organization that was used to a traditional project management approach. Here are some lessons that I learnt from it. Don’t let the Project Manager be the Product Owner First lesson learnt is to identify the correct product owner – in this instance the product manager assumed the role of the product owner which was a mistake. The product owner is the one who has the most to loose if the project fails. With a methodology that advocates removing the role of the project manager from the process then it is not in the interests of the person who is employed as a project manager to be the product owner – in fact they have the most to gain should the project fail. Know the time commitments of team members to the Project Second lesson learnt is to get a firm time commitment of the members on a team for the sprint and to hold them to it. In this project instance many of the issues we faced were with team members having to double up on supporting existing projects/systems and the scrum project. In many situations they just didn’t get round to doing any work on the scrum project for several days while they tried to meet other commitments. Initially this was not made transparent to the team – in stand up team members would say that had done some work but would be very vague on how much time they had actually spent using the blackhole of their other legacy projects as an excuse – putting up a time burn down chart made time allocations transparent and easy to hold the team to. In addition, how can you plan for a sprint without knowing the actual time available of the members – when I mean actual time, the exercise of getting them to go through all their appointments and lunch times and breaks and removing them from their time commitment helps get you to a realistic time that they can dedicate. Make sure you meet your minimum team sizes In a recent post I wrote about the difference between a partnership and a team. If you are going to do scrum in a large organization make sure you have a minimum team size of at least 3 developers. My experience with larger organizations is that people have a tendency to be sick more, take more leave and generally not be around – if you have a team size of two it is so easy to loose momentum on the project – the more people you have in the team (up to about 9) the more the momentum the project will have when people are not around. Swapping from one methodology to another can seem as waste to the customer It sounds bad, but most customers don’t care what methodology you use. Often they have bought into the “big plan upfront”. If you can, avoid taking a project on midstream from a traditional approach unless the customer has not bought into the process – with this particular project they had a detailed upfront planning breakaway with the customer using the traditional approach and then before the project started we moved onto a scrum implementation – this seemed as waste to the customer. We should have managed the customers expectation properly. Don’t play the role of the scrum master if you can’t be the scrum master With this particular implementation I was the “scrum master”. But all I did was go through the process of the formal meetings of scrum – I attended stand up, retrospectives and planning – but I was not hands on the ground. I was not performing the most important role of removing blockages – and by the end of the project there were a number of blockages “cropping up”. What could have been a better approach was to take someone on the team and train them to be the scrum master and be present to coach them. Alternatively actually be on the team on a fulltime basis and be the scrum master. By just going through the meetings of scrum didn’t mean we were doing scrum. So we failed with this one, if you fail look at it from an agile perspective As this particular project drew to a close and it became more and more apparent that it was not going to succeed the failure of it became depressing. Emotions were expressed by various people on the team that we not encouraging and enforced the failure. Embracing the failure and looking at it for what it is instead of taking it as the end of the world can change how you grow from the experience. Acknowledging that it failed and then focussing on learning from why and how to avoid the failure in the future can change how you feel emotionally about the team, the project and the organization.

Read the article

Multithreading in lwjgl getting rid of sleep.

- by pangaea

I'm trying to use multithreading in my game. However, I can't seem to get rid of the sleep. If I don't it's a blank screen, as there is no time for the computer to actually render the triangleMob as it can't access getArrayList(), in my main class I have a TriangleMob arraylist. If I delay it, then it can access the previousMob and it renders. If I don't, then it's blank screen. Can I get rid of the delay? Also, is this a bad way to multithread? Surely, this should be fast. I need multithreading so can you please not suggest not using it. public class TriangleMob extends Thread implements Runnable { private static int count=0; private int objectDisplayList; private static ArrayList<TriangleMob> previousMob = new ArrayList<TriangleMob>(); private static ArrayList<TriangleMob> currentMob = new ArrayList<TriangleMob>(); private static ArrayList<TriangleMob> laterMob = new ArrayList<TriangleMob>(); private Vector3f position = new Vector3f(0f,0f,0f); private Vector3f movement = new Vector3f(0f,0f,0f); public TriangleMob() { // Create the display list CreateDisplayList(); count++; } public TriangleMob(Vector3f position) { // Create the display list CreateDisplayList(); this.position = position; count++; } private void CreateDisplayList() { objectDisplayList = glGenLists(1); glNewList(objectDisplayList, GL_COMPILE); { double topPoint = 0.75; glBegin(GL_TRIANGLES); glColor4f(1, 1, 0, 1f); glVertex3d(0, topPoint, -5); glColor4f(0, 0, 1, 1f); glVertex3d(-1, -0.75, -4); glColor4f(0, 0, 1, 1f); glVertex3d(1, -.75, -4); glColor4f(1, 1, 0, 1f); glVertex3d(0, topPoint, -5); glColor4f(0, 0, 1, 1f); glVertex3d(1, -0.75, -4); glColor4f(0, 0, 1, 1f); glVertex3d(1, -0.75, -6); glColor4f(1, 1, 0, 1f); glVertex3d(0, topPoint, -5); glColor4f(0, 0, 1, 1f); glVertex3d(1, -0.75, -6); glColor4f(0, 0, 1, 1f); glVertex3d(-1, -.75, -6); glColor4f(1, 1, 0, 1f); glVertex3d(0, topPoint, -5); glColor4f(0, 0, 1, 1f); glVertex3d(-1, -0.75, -6); glColor4f(0, 0, 1, 1f); glVertex3d(-1, -.75, -4); glEnd(); glColor4f(1, 1, 1, 1); } glEndList(); } public static int getCount() { return count; } public Vector3f getMovement() { return movement; } public Vector3f getPosition() { return position; } public synchronized int getObjectList() { return objectDisplayList; } public synchronized static ArrayList<TriangleMob> getArrayList(){ if(previousMob != null) { return previousMob; } previousMob.add(new TriangleMob()); return previousMob; } public synchronized void move(Vector3f movement) { // If you want to move in all 3 axis position.x += movement.x; position.y += movement.y; position.z += movement.z; } public synchronized void render() { glPushMatrix(); glTranslatef(-position.x, -position.y, -position.z); glCallList(objectDisplayList); glPopMatrix(); } public synchronized static void setTriangleMob(ArrayList<TriangleMob> triangleMobSet) { laterMob = triangleMobSet; } private synchronized void setPreTriangleMob(ArrayList<TriangleMob> currentMob2) { previousMob = currentMob2; } public void run(){ while(true) { if(laterMob == null) { currentMob = laterMob; System.out.println("Copying"); } for(int i=0; i<currentMob.size(); i++) { currentMob.get(i).move(new Vector3f(0.1f,0.01f,0.01f)); } setPreTriangleMob(currentMob); try { sleep(1L); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } } } }

Read the article

The sign of a true manager is delegation (C# style)

- by MarkPearl

Today I thought I would write a bit about delegates in C#. Up till recently I have managed to side step any real understanding of what delegates do and why they are useful – I mean, I know roughly what they do and have used them a lot, but I have never really got down dirty with them and mucked about. Recently however with my renewed interest in Silverlight delegates came up again as a possible solution to a particular problem, and suddenly I found myself opening a bland little console application to just see exactly how far I could take delegates with my limited knowledge. So, let’s first look at the MSDN definition of delegates… A delegate declaration defines a reference type that can be used to encapsulate a method with a specific signature. A delegate instance encapsulates a static or an instance method. Delegates are roughly similar to function pointers in C++; however, delegates are type-safe and secure. Well, don’t you love MSDN for such a useful definition. I must give it credit though… later on it really explains it a bit better by saying “A delegate lets you pass a function as a parameter. The type safety of delegates requires the function you pass as a delegate to have the same signature as the delegate declaration.” A little more reading up on delegates mentions that delegates are similar to interfaces in that they enable the separation of specification and implementation. A delegate declares a single method, while an interface declares a group of methods. So enough reading - lets look at some code and see a basic example of a delegate… Let’s assume we have a console application with a simple delegate declared called AdjustValue like below… class Program { private delegate int AdjustValue(int val); static void Main(string[] args) { } } In a sense, all we have said is that we will be creating one or more methods that follow the same pattern as AdjustValue – i.e. they will take one input value of type int and return an integer. We could then expand our code to have various methods that match the structure of our delegate AdjustValue (remember the structure is int xxx (int xxx)) class Program { private delegate int AdjustValue(int val); private static int Dbl(int val) { return val * 2; } private static int AlwaysOne(int val) { return 1; } static void Main(string[] args) { } } Above I have expanded my project to have two methods, one called Dbl and the other AlwaysOne. Dbl always returns double the input val and AlwaysOne always returns 1. I could now declare a variable and assign it to be one of those functions, like the following… class Program { private delegate int AdjustValue(int val); private static int Dbl(int val) { return val * 2; } private static int AlwaysOne(int val) { return 1; } static void Main(string[] args) { AdjustValue myDelegate; myDelegate = Dbl; Console.WriteLine(myDelegate(1).ToString()); Console.ReadLine(); } } In this instance I have declared an instance of the AdjustValue delegate called myDelegate; I have then told myDelegate to point to the method Dbl, and then called myDelegate(1). What would the result be? Yes, in this instance it would be exactly the same as me calling the following code… static void Main(string[] args) { Console.WriteLine(Dbl(1).ToString()); Console.ReadLine(); } So why all the extra work for delegates when we could just do what we did above and call the method directly? Well… that separation of specification to implementation comes to mind. So, this all seems pretty simple. Let’s take a slightly more complicated variation to the console application. Assume that my project is the same as the one previously except that my main method is adjusted as follows… static void Main(string[] args) { AdjustValue myDelegate; myDelegate = Dbl; myDelegate = AlwaysOne; Console.WriteLine(myDelegate(1).ToString()); Console.ReadLine(); } What would happen in this scenario? Quite simply “1” would be written to the console, the reason being that myDelegate was last pointing to the AlwaysOne method before it was called. Make sense? In a way, the myDelegate is a variable method that can be swapped and changed when needed. Let’s make the code a little more confusing by using a delegate in the declaration of another delegate as shown below… class Program { private delegate int AdjustValue(InputValue val); private delegate int InputValue(); private static int Dbl(InputValue val) { return val()*2; } private static int GetInputVal() { Console.WriteLine("Enter a whole number : "); return Convert.ToInt32(Console.ReadLine()); } static void Main(string[] args) { AdjustValue myDelegate; myDelegate = Dbl; Console.WriteLine(myDelegate(GetInputVal).ToString()); Console.ReadLine(); } } Now it gets really interesting because it looks like we have passed a method into a function in the main method by declaring… Console.WriteLine(myDelegate(GetInputVal).ToString()); So, what it the output? Well, try take a guess on what will happen – then copy the code and see if you got it right. Well that brings me to the end of this short explanation of Delegates. Hopefully it made sense!

Read the article

Processing Text and Binary (Blob, ArrayBuffer, ArrayBufferView) Payload in WebSocket - (TOTD #185)

- by arungupta

The WebSocket API defines different send(xxx) methods that can be used to send text and binary data. This Tip Of The Day (TOTD) will show how to send and receive text and binary data using WebSocket. TOTD #183 explains how to get started with a WebSocket endpoint using GlassFish 4. A simple endpoint from that blog looks like: @WebSocketEndpoint("/endpoint") public class MyEndpoint { public void receiveTextMessage(String message) { . . . } } A message with the first parameter of the type String is invoked when a text payload is received. The payload of the incoming WebSocket frame is mapped to this first parameter. An optional second parameter, Session, can be specified to map to the "other end" of this conversation. For example: public void receiveTextMessage(String message, Session session) { . . . } The return type is void and that means no response is returned to the client that invoked this endpoint. A response may be returned to the client in two different ways. First, set the return type to the expected type, such as: public String receiveTextMessage(String message) { String response = . . . . . . return response; } In this case a text payload is returned back to the invoking endpoint. The second way to send a response back is to use the mapped session to send response using one of the sendXXX methods in Session, when and if needed. public void receiveTextMessage(String message, Session session) { . . . RemoteEndpoint remote = session.getRemote(); remote.sendString(...); . . . remote.sendString(...); . . . remote.sendString(...); } This shows how duplex and asynchronous communication between the two endpoints can be achieved. This can be used to define different message exchange patterns between the client and server. The WebSocket client can send the message as: websocket.send(myTextField.value); where myTextField is a text field in the web page. Binary payload in the incoming WebSocket frame can be received if ByteBuffer is used as the first parameter of the method signature. The endpoint method signature in that case would look like: public void receiveBinaryMessage(ByteBuffer message) { . . . } From the client side, the binary data can be sent using Blob, ArrayBuffer, and ArrayBufferView. Blob is a just raw data and the actual interpretation is left to the application. ArrayBuffer and ArrayBufferView are defined in the TypedArray specification and are designed to send binary data using WebSocket. In short, ArrayBuffer is a fixed-length binary buffer with no format and no mechanism for accessing its contents. These buffers are manipulated using one of the views defined by one of the subclasses of ArrayBufferView listed below: Int8Array (signed 8-bit integer or char) Uint8Array (unsigned 8-bit integer or unsigned char) Int16Array (signed 16-bit integer or short) Uint16Array (unsigned 16-bit integer or unsigned short) Int32Array (signed 32-bit integer or int) Uint32Array (unsigned 16-bit integer or unsigned int) Float32Array (signed 32-bit float or float) Float64Array (signed 64-bit float or double) WebSocket can send binary data using ArrayBuffer with a view defined by a subclass of ArrayBufferView or a subclass of ArrayBufferView itself. The WebSocket client can send the message using Blob as: blob = new Blob([myField2.value]);websocket.send(blob); where myField2 is a text field in the web page. The WebSocket client can send the message using ArrayBuffer as: var buffer = new ArrayBuffer(10);var bytes = new Uint8Array(buffer);for (var i=0; i<bytes.length; i++) { bytes[i] = i;}websocket.send(buffer); A concrete implementation of receiving the binary message may look like: @WebSocketMessagepublic void echoBinary(ByteBuffer data, Session session) throws IOException { System.out.println("echoBinary: " + data); for (byte b : data.array()) { System.out.print(b); } session.getRemote().sendBytes(data);} This method is just printing the binary data for verification but you may actually be storing it in a database or converting to an image or something more meaningful. Be aware of TYRUS-51 if you are trying to send binary data from server to client using method return type. Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) TOTD #183 - Getting Started with WebSocket in GlassFish TOTD #184 - Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark Subsequent blogs will discuss the following topics (not necessary in that order) ... Error handling Custom payloads using encoder/decoder Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

Read the article

Adventures in Windows 8: Solving activation errors

- by Laurent Bugnion

Note: I tagged this article with “MVVM” because I got a few support requests for MVVM Light regarding this exact issue. In fact it is a Windows 8 issue and has nothing to do with MVVM Light per se… Sometimes when you work on a Windows 8 app, you will get a very annoying issue when starting the app. In that case, the app doesn’t not even start past the Splash screen. Putting a breakpoint in App.xaml.cs doesn’t help because the app doesn’t even reach that point! So what exactly is happening? Well when a Windows 8 app starts, the system is performing a few check first. One of the checks, for instance, is to see if an app with the same package ID is already available. The package ID is a unique value set in the package manifest. In the Solution Explorer, double click on Package.appxmanifest. This opens the manifest in a special editor Click on the Packaging tab See the GUID under Package Name. This is the unique ID I am talking about. If there is a conflict (i.e. if an app is already installed with the exact same ID), Windows will warm the user that the app is already installed. However when you are in the process of developing an app, you install and uninstall the same app many many times (every time that you start in Visual Studio), and sometimes some issues arise, for instance failing to uninstall the app before starting the new instance of the same app. First step if you get such an error When the application fails to start past the splash screen, the first step is to identify what kind of error happened. In my experience the “already installed” is by far the most frequent (in fact I never had another such error), but it can be something else. An annoying thing is that the popup that shows the error is usually started below the Windows 8 app, and so you don’t even see it! This is especially true if you run this in the Simulator. In that case, do the following: Press on the Simulator’s home button, then press on the Desktop tile on the Start menu. The error popup should be shown on the desktop. If your applications runs on the Local machine, you also do the same and press the Windows button, and then from the Start menu press the Desktop tile. Deployment error in Studio Sometimes the same error causes Visual Studio to fail launching the application at all with a deployment error. This is a better case, because at least it is clear that there is an issue. In that case, write down the code that is shown in the Error window (for instance 0x80073D05 in the example below). Once you have the error code, go to the “Troubleshooting packaging, deployment, and query of Windows Store apps” page and look up the code in question. In my case, the error was “ERROR_DELETING_EXISTING_APPLICATIONDATA_STORE_FAILED”, “An error occurred while deleting the package's previously existing application data.” Solving the “ERROR_DELETING_EXISTING_APPLICATIONDATA_STORE_FAILED” issue Update: Before trying the below, you can also try the simple steps: Exit Visual Studio Go to the Start menu Locate your app’s tile. It should be visible in the Start menu directly, towards the far end on the right. Right click the tile and select Uninstall from the App Bar. Restart Visual Studio and try again. Sometimes it helps. If it doesn’t, then try the following: In order to solve the case where Windows, for any reason, fails to delete the existing application before starting the new instance, follow the steps: Open the Package.appxmanifest in Visual Studio Open the Packaging tab. Change the Package name. For tests you can just try to change the last character of the GUID, though I would recommend creating a brand new GUID. Press Start Type GUID Start the GUID Generator application Select Registry Format Press Copy. Paste the new GUID in place of the Package Name in Visual Studio Important: don’t forget to remove the curly brackets at the beginning and at the end of the newly pasted GUID. Then you just have to cross your fingers and start the application again… If it works, celebrate. if it doesn’t work… well at this point I am not sure so good luck with that ;) Happy coding, Laurent Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

Read the article

Encrypt images before uploading to Dropbox [migrated]

- by Cherry

I want to encrypt a file first before the file will be uploaded to the dropbox. So i have implement the encryption inside the uploading of the codes. However, there is an error after i integrate the codes together. Where did my mistake go wrong? Error at putFileOverwriteRequest and it says The method putFileOverwriteRequest(String, InputStream, long, ProgressListener) in the type DropboxAPI is not applicable for the arguments (String, FileOutputStream, long, new ProgressListener(){}) Another problem is that this FileOutputStream fis = new FileOutputStream(new File("dont know what to put in this field")); i do not know where to put the file so that after i read the file, it will call the path and then upload to the Dropbox. Anyone is kind to help me in this? As time is running out for me and i still cant solve the problem. Thank you in advance. The full code is as below. public class UploadPicture extends AsyncTask<Void, Long, Boolean> { private DropboxAPI<?> mApi; private String mPath; private File mFile; private long mFileLen; private UploadRequest mRequest; private Context mContext; private final ProgressDialog mDialog; private String mErrorMsg; public UploadPicture(Context context, DropboxAPI<?> api, String dropboxPath, File file) { // We set the context this way so we don't accidentally leak activities mContext = context.getApplicationContext(); mFileLen = file.length(); mApi = api; mPath = dropboxPath; mFile = file; mDialog = new ProgressDialog(context); mDialog.setMax(100); mDialog.setMessage("Uploading " + file.getName()); mDialog.setProgressStyle(ProgressDialog.STYLE_HORIZONTAL); mDialog.setProgress(0); mDialog.setButton("Cancel", new OnClickListener() { public void onClick(DialogInterface dialog, int which) { // This will cancel the putFile operation mRequest.abort(); } }); mDialog.show(); } @Override protected Boolean doInBackground(Void... params) { try { KeyGenerator keygen = KeyGenerator.getInstance("DES"); SecretKey key = keygen.generateKey(); //generate key //encrypt file here first byte[] plainData; byte[] encryptedData; Cipher cipher = Cipher.getInstance("DES/ECB/PKCS5Padding"); cipher.init(Cipher.ENCRYPT_MODE, key); //File f = new File(mFile); //read file FileInputStream in = new FileInputStream(mFile); //obtains input bytes from a file plainData = new byte[(int)mFile.length()]; in.read(plainData); //Read bytes of data into an array of bytes encryptedData = cipher.doFinal(plainData); //encrypt data FileOutputStream fis = new FileOutputStream(new File("dont know what to put in this field")); //upload to a path first then call the path so that it can be uploaded up to the dropbox //save encrypted file to dropbox // By creating a request, we get a handle to the putFile operation, // so we can cancel it later if we want to //FileInputStream fis = new FileInputStream(mFile); String path = mPath + mFile.getName(); mRequest = mApi.putFileOverwriteRequest(path, fis, mFile.length(), new ProgressListener() { @Override public long progressInterval() { // Update the progress bar every half-second or so return 500; } @Override public void onProgress(long bytes, long total) { publishProgress(bytes); } }); if (mRequest != null) { mRequest.upload(); return true; } } catch (DropboxUnlinkedException e) { // This session wasn't authenticated properly or user unlinked mErrorMsg = "This app wasn't authenticated properly."; } catch (DropboxFileSizeException e) { // File size too big to upload via the API mErrorMsg = "This file is too big to upload"; } catch (DropboxPartialFileException e) { // We canceled the operation mErrorMsg = "Upload canceled"; } catch (DropboxServerException e) { // Server-side exception. These are examples of what could happen, // but we don't do anything special with them here. if (e.error == DropboxServerException._401_UNAUTHORIZED) { // Unauthorized, so we should unlink them. You may want to // automatically log the user out in this case. } else if (e.error == DropboxServerException._403_FORBIDDEN) { // Not allowed to access this } else if (e.error == DropboxServerException._404_NOT_FOUND) { // path not found (or if it was the thumbnail, can't be // thumbnailed) } else if (e.error == DropboxServerException._507_INSUFFICIENT_STORAGE) { // user is over quota } else { // Something else } // This gets the Dropbox error, translated into the user's language mErrorMsg = e.body.userError; if (mErrorMsg == null) { mErrorMsg = e.body.error; } } catch (DropboxIOException e) { // Happens all the time, probably want to retry automatically. mErrorMsg = "Network error. Try again."; } catch (DropboxParseException e) { // Probably due to Dropbox server restarting, should retry mErrorMsg = "Dropbox error. Try again."; } catch (DropboxException e) { // Unknown error mErrorMsg = "Unknown error. Try again."; } catch (FileNotFoundException e) { } return false; } @Override protected void onProgressUpdate(Long... progress) { int percent = (int)(100.0*(double)progress[0]/mFileLen + 0.5); mDialog.setProgress(percent); } @Override protected void onPostExecute(Boolean result) { mDialog.dismiss(); if (result) { showToast("Image successfully uploaded"); } else { showToast(mErrorMsg); } } private void showToast(String msg) { Toast error = Toast.makeText(mContext, msg, Toast.LENGTH_LONG); error.show(); } }

Read the article

c# display DB table structure

- by user3529643

I have a question. My code is the following : public partial class Form1 : Form { public OleDbConnection datCon; public string MyDataFile; public ArrayList tblArray; public ArrayList fldArray; public Form1() { InitializeComponent(); lvData.Clear(); lvData.View = View.Details; lvData.LabelEdit = false; lvData.FullRowSelect = true; lvData.GridLines = true; } private void DataConnection() { MyDataFile = Application.StartupPath + @"\studenti.mdb"; string MyCon = @"provider=microsoft.jet.oledb.4.0;data source=" + MyDataFile; try { datCon = new OleDbConnection(MyCon); } catch (Exception ex) { MessageBox.Show(ex.Message); } FillTreeView(); } private void GetTables(OleDbConnection cnn) { try { cnn.Open(); DataTable schTable = cnn.GetOleDbSchemaTable(OleDbSchemaGuid.Tables, new Object[] { null, null, null, "TABLE" }); tblArray = new ArrayList(); foreach (DataRow datrow in schTable.Rows) { tblArray.Add(datrow["TABLE_NAME"].ToString()); } cnn.Close(); } catch (Exception ex) { MessageBox.Show(ex.Message); } } private void GetFields(OleDbConnection cnn, string tabNode) { string tabName; try { tabName = tabNode; cnn.Open(); DataTable schTable = cnn.GetOleDbSchemaTable(OleDbSchemaGuid.Columns, new Object[] { null, null, tabName }); fldArray = new ArrayList(); foreach (DataRow datRow in schTable.Rows) { fldArray.Add(datRow["COLUMN_NAME"].ToString()); } cnn.Close(); } catch (Exception ex) { MessageBox.Show(ex.Message); } } private void FillTreeView() { tvData.Nodes.Clear(); tvData.Nodes.Add("Database"); tvData.Nodes[0].Tag = "RootDB"; GetTables(datCon); // add table node for (int i = 0; i < tblArray.Count; i++) { tvData.Nodes[0].Nodes.Add(tblArray[i].ToString()); tvData.Nodes[0].Nodes[i].Tag = "Tables"; } // add field node for (int i = 0; i < tblArray.Count; i++) { GetFields(datCon, tblArray[i].ToString()); for (int j = 0; j < fldArray.Count; j++) { tvData.Nodes[0].Nodes[i].Nodes.Add(fldArray[j].ToString()); tvData.Nodes[0].Nodes[i].Nodes[j].Tag = "Fields"; } } this.tvData.ContextMenuStrip = contextMenuStrip1; contextMenuStrip1.ItemClicked +=contextMenuStrip1_ItemClicked; } public void FillListView(OleDbConnection cnn, string tabName) { OleDbCommand cmdRead; OleDbDataReader datReader; string strField; lblTableName.Text = tabName; strField = "SELECT * FROM [" + tabName + "]"; // Initi cmdRead obiect cmdRead = new OleDbCommand(strField, cnn); cnn.Open(); datReader = cmdRead.ExecuteReader(); // fill ListView while (datReader.Read()) { ListViewItem objListItem = new ListViewItem(datReader.GetValue(0).ToString()); for (int c = 1; c < datReader.FieldCount; c++) { objListItem.SubItems.Add(datReader.GetValue(c).ToString()); } lvData.Items.Add(objListItem); } datReader.Close(); cnn.Close(); } private void ViewToolStripMenuItem_Click(object sender, EventArgs e) { DataConnection(); } public void tvData_AfterExpand(object sender, System.Windows.Forms.TreeViewEventArgs e) { string tabName; int fldCount; if (e.Node.Tag.ToString() == "Tables") { fldCount = e.Node.GetNodeCount(false); //column headers. int n = lvData.Width; double wid = n / fldCount; // width columnn for (int c = 0; c < fldCount; c++) { lvData.Columns.Add(e.Node.Nodes[c].Text, (int)wid, HorizontalAlignment.Left); } // gett table name tabName = e.Node.Text; FillListView(datCon, tabName); } } public void button1_Click(object sender, EventArgs e) { //TO DO?? } } I have a treeview populated with tables (nodes) from my database, and a listview which is populated with the data from my tables when I click on a table. As you can see I have a button1 on my form. When I click it I want it to display to me the structure of the table I selected in my treeview (a treeview node). Not too many details, just the name of the columns in my table, type of columns, primary keys. I've tried to follow many tutorials but I can t seem to manage it.

Read the article

What's New in Oracle VM VirtualBox 4.2?

- by Fat Bloke

A year is a long time in the IT industry. Since the last VirtualBox feature release, which was a little over a year ago, we've seen: new releases of cool new operating systems, such as Windows 8, ChromeOS, and Mountain Lion; we've seen a myriad of new Linux releases from big Enterprise class distributions like Oracle 6.3, to accessible desktop distros like Ubuntu 12.04 and Fedora 17; and we've also seen the spec of a typical PC or laptop double in power. All of these events have influenced our new VirtualBox version which we're releasing today. Here's how... Powerful hosts One of the trends we've seen is that as the average host platform becomes more powerful, our users are consistently running more and more vm's. Some of our users have large libraries of vm's of various vintages, whilst others have groups of vm's that are run together as an assembly of the various tiers in a multi-tiered software solution, for example, a database tier, middleware tier, and front-ends. So we're pleased to unveil a more powerful VirtualBox Manager to address the needs of these users: VM Groups Groups allow you to organize your VM library in a sensible way, e.g. by platform type, by project, by version, by whatever. To create groups you can drag one VM onto another or select one or more VM's and choose Machine...Group from the menu bar. You can expand and collapse groups to save screen real estate, and you can Enter and Leave a group (think iPad navigation here) by using the right and left arrow keys when groups are selected. But groups are more than passive folders, because you can now also perform operations on groups, rather than all the individual VMs. So if you have a multi-tiered solution you can start the whole stack up with just one click. Autostart Many VirtualBox users run dedicated services in their VMs, for example, running a Wiki. With these types of VM workloads, you really want the VM start up when the host machine boots up. So with 4.2 we've introduced a cross-platform Auto-start mechanism to allow you to treat VMs as host services. Headless VM Launching With VM's such as web servers, wikis, and other types of server-class workloads, the Console of the VM is pretty much redundant. For some time now VirtualBox has offered a separate launch mechanism for these VM's, namely the command-line interface commands VBoxHeadless or VBoxManage startvm ... --type headless commands. But with 4.2 we also allow you launch headless VMs from the Manager. Simply hold down Shift when launching the VM from the Manager. It's that easy. But how do you stop a headless VM? Well, with 4.2 we allow you to Close the VM from the Manager. (BTW best to use the ACPI Shutdown method which allows the guest VM to close down gracefully.) Easy VM Creation For our expert users, the New VM Wizard was a little tiresome, so now there's a faster 2-click VM creation mode. Just Hide the description when creating a new VM. Powerful VMs As the hosts have become more powerful, so are the guests that are running inside them. Here are some of the 4.2 features to accommodate them: Virtual Network Interface Cards With 4.2, it's now possible to create VMs with up to 36 NICs, when using the ICH9 chipset emulation. But with great power comes great responsibility (didn't Obi-Wan say something similar?), and so we have also introduced bandwidth limiting to prevent a rogue VM stealing the whole pipe. VLAN tagging Some of our users leverage VLANs extensively so we've enhanced the E1000 NICs to support this. Processor Performance If you are running a CPU which supports Nested Paging (aka EPT in the Intel world) such as most of the Core i5 and i7 CPUs, or are running an AMD Bulldozer or later, you should see some performance improvements from our work with these processors. And while we're talking Processors, we've added support for some of the more modern VIA CPUs too. Powerful Automation Because VirtualBox runs atop a fully blown operating system, it makes sense to leverage the capabilities of the host to run scripts that can drive the guest VMs. Guest Automation was introduced in a prior release but with 4.2 we've revamped the APIs to allow a richer and more powerful set of operations to be executed by the guest. Check out the IGuest APIs in the VirtualBox Programming Guide and Reference (SDK). Powerful Platforms All the hardcore engineering that has gone into 4.2 has been done for a purpose and that is to deliver a fast and powerful engine that can run almost any x86 OS because of the integrity of the virtualization. So we're pleased to add support for these platforms: Mac OS X "Mountain Lion" Windows 8 Windows Server 2012 Ubuntu 12.04 (“Precise Pangolin”) Fedora 17 Oracle Linux 6.3 Here's the proof: We don't have time to go into the myriad of smaller improvements such as support for burning audio CDs from a guest, bi-directional clipboard control, drag-and-drop of files into Linux guests, etc. so we'll leave that as an exercise for the user as soon as you've downloaded from the Oracle or community site and taken a peek at the User Guide. So all in all, a pretty solid release, one that we hope you'll enjoy discovering. - FB

Read the article

How to move a rectangle properly?

- by bodycountPP

I recently started to learn OpenGL. Right now I finished the first chapter of the "OpenGL SuperBible". There were two examples. The first had the complete code and showed how to draw a simple triangle. The second example is supposed to show how to move a rectangle using SpecialKeys. The only code provided for this example was the SpecialKeys method. I still tried to implement it but I had two problems. In the previous example I declared and instaciated vVerts in the SetupRC() method. Now as it is also used in the SpecialKeys() method, I moved the declaration and instantiation to the top of the code. Is this proper c++ practice? I copied the part where vertex positions are recalculated from the book, but I had to pick the vertices for the rectangle on my own. So now every time I press a key for the first time the rectangle's upper left vertex is moved to (-0,5:-0.5). This ok because of GLfloat blockX = vVerts[0]; //Upper left X GLfloat blockY = vVerts[7]; // Upper left Y But I also think that this is the reason why my rectangle is shifted in the beginning. After the first time a key was pressed everything works just fine. Here is my complete code I hope you can help me on those two points. GLBatch squareBatch; GLShaderManager shaderManager; //Load up a triangle GLfloat vVerts[] = {-0.5f,0.5f,0.0f, 0.5f,0.5f,0.0f, 0.5f,-0.5f,0.0f, -0.5f,-0.5f,0.0f}; //Window has changed size, or has just been created. //We need to use the window dimensions to set the viewport and the projection matrix. void ChangeSize(int w, int h) { glViewport(0,0,w,h); } //Called to draw the scene. void RenderScene(void) { //Clear the window with the current clearing color glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT|GL_STENCIL_BUFFER_BIT); GLfloat vRed[] = {1.0f,0.0f,0.0f,1.0f}; shaderManager.UseStockShader(GLT_SHADER_IDENTITY,vRed); squareBatch.Draw(); //perform the buffer swap to display the back buffer glutSwapBuffers(); } //This function does any needed initialization on the rendering context. //This is the first opportunity to do any OpenGL related Tasks. void SetupRC() { //Blue Background glClearColor(0.0f,0.0f,1.0f,1.0f); shaderManager.InitializeStockShaders(); squareBatch.Begin(GL_QUADS,4); squareBatch.CopyVertexData3f(vVerts); squareBatch.End(); } //Respond to arrow keys by moving the camera frame of reference void SpecialKeys(int key,int x,int y) { GLfloat stepSize = 0.025f; GLfloat blockSize = 0.5f; GLfloat blockX = vVerts[0]; //Upper left X GLfloat blockY = vVerts[7]; // Upper left Y if(key == GLUT_KEY_UP) { blockY += stepSize; } if(key == GLUT_KEY_DOWN){blockY -= stepSize;} if(key == GLUT_KEY_LEFT){blockX -= stepSize;} if(key == GLUT_KEY_RIGHT){blockX += stepSize;} //Recalculate vertex positions vVerts[0] = blockX; vVerts[1] = blockY - blockSize*2; vVerts[3] = blockX + blockSize * 2; vVerts[4] = blockY - blockSize *2; vVerts[6] = blockX+blockSize*2; vVerts[7] = blockY; vVerts[9] = blockX; vVerts[10] = blockY; squareBatch.CopyVertexData3f(vVerts); glutPostRedisplay(); } //Main entry point for GLUT based programs int main(int argc, char** argv) { //Sets the working directory. Not really needed gltSetWorkingDirectory(argv[0]); //Passes along the command-line parameters and initializes the GLUT library. glutInit(&argc,argv); //Tells the GLUT library what type of display mode to use, when creating the window. //Double buffered window, RGBA-Color mode,depth-buffer as part of our display, stencil buffer also available glutInitDisplayMode(GLUT_DOUBLE|GLUT_RGBA|GLUT_DEPTH|GLUT_STENCIL); //Window size glutInitWindowSize(800,600); glutCreateWindow("MoveRect"); glutReshapeFunc(ChangeSize); glutDisplayFunc(RenderScene); glutSpecialFunc(SpecialKeys); //initialize GLEW library GLenum err = glewInit(); //Check that nothing goes wrong with the driver initialization before we try and do any rendering. if(GLEW_OK != err) { fprintf(stderr,"Glew Error: %s\n",glewGetErrorString); return 1; } SetupRC(); glutMainLoop(); return 0; }

Read the article

YouTube SEO: Video Optimization

- by Mike Stiles

SEO optimization is still regarded as one of the primary tools in the digital marketing kit. However and wherever a potential customer is conducting a search, brands want their content to surface in the top results. Makes sense. But without a regular flow of good, relevant content, your SEO opportunities run shallow. We know from several studies video is one of the most engaging forms of content, so why not make sure that in addition to being cool, your videos are helping you win the SEO game? Keywords:-Decide what search phrases make the most sense for your video. Don’t dare use phrases that have nothing to do with the content. You’ll make people mad.-Research those keywords to see how competitive they are. Adjust them so there are still lots of people searching for it, but there are not as many links showing up for it.-Search your potential keywords and phrases to see what comes up. It’s amazing how many people forget to do that. Video Title: -Try to start and/or end with your keyword.-When you search on YouTube, visual action words tend to come up as suggested searches. So try to use action words. Video Description: -Lead with a link to your site (include http://). -Don’t stuff this with your keyword. It leads to bad writing and it won’t work anyway. This is where you convince people to watch, so write for humans. Use some showmanship. -At the end, do a call to action (subscribe, see the whole playlist, visit our social channels, etc.) Video Tags:-Don’t over-tag. 5-10 tags per video is plenty. -If you’re compelled to have more than 10, that means you should probably make more videos specifically targeting all those keywords. Find Linking Pals:-45% of videos are discovered on video sites. But 44% are found through links on blogs and sites.-Write a blog about your video’s content, then link to the video in it. -A good site for finding places to guest blog is myblogguest.com-Once you find good linking partners, they’ll link to your future videos (as long as they’re good and you’re returning the favor). Tap the Power of Similar Videos:-Use Video Reply to associate your video with other topic-related videos. That’s when you make a video responding to or referencing a video made by someone else. Content:-Again, build up a portfolio of videos, not just one that goes after 30 keywords.-Create shorter, sequential videos that pull them deeper into the content and closer to a desired final action.-Organize your video topics separately using Playlists. Playlists show up as a whole in search results like individual videos, so optimize playlists the same as you would for a video. Meta Data:-Too much importance is placed on it. It accounts for only 15% of search success.-YouTube reads Captions or Transcripts to determine what a video is about. If you’re not using them, you’re missing out.-You get the SEO benefit of captions and transcripts whether the viewers has them toggled on or not. Promotion:-This accounts for 25% of search success.-Promote the daylights out of your videos using your social channels and digital assets. Don’t assume it’s going to magically get discovered. -You can pay to promote your video. This could surface it on the YouTube home page, YouTube search results, YouTube related videos, and across the Google content network. Community:-Accounts for 10% of search success.-Make sure your YouTube home page is a fun place to spend time. Carefully pick your featured video, and make sure your Playlists are featured. -Participate in discussions so users will see you’re present. The volume of ratings/comments is as important as the number of views when it comes to where you surface on search. Video Sitemaps:-As with a web site, a video sitemap helps Google quickly index your video.-Google wants to know title, description, play page URL, the URL of the thumbnail image you want, and raw video file location.-Sitemaps are xml files you host or dynamically generate on your site. Once you’ve made your sitemap, sign in and submit it using Google webmaster tools. Just as with the broadcast and cable TV channels, putting a video out there is only step one. You also have to make sure everybody knows it’s there so the largest audience possible can see it. Here’s hoping you get great ratings. @mikestiles

Read the article

Array from HTML forms - Internal Server Error

- by user1392411

I try to make a requestform for our school. But if I transmit this form I get a "Internal Server Error". I searched but I found nothing like that. Also I don't get a only this error message "Internal Server Error", nothing more. Any ideas why? <!DOCTYPE html> <html> <head> <title></title> <meta charset="utf-8"> <meta name="description" content=""> <link rel="stylesheet" href="../css/normalize.css" /> <link rel="stylesheet" href="../css/bestellformular.css" />   </head> <body> <section id="head"> </section> <form action="../php/einlesen.php" method="post"> <section id="body"> <h1>Bestellung</h1> <table> <colgroup> <col width="10%"> <col width="80%"> <col width="10%"> </colgroup> <tr> <th> Artikel-Nr. </th> <th> Artikel </th> <th> Menge </th> </tr> <tr> <td> <input type="number" placeholder="Artikel-Nr." name="articelnr[]" required /> </td> <td> <input type="text" placeholder="Name des Artikels" name="articelname[]" required /> </td> <td> <input type="number" placeholder="Menge" name="quantity[]" required /> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> </table> </section> <section id="info"> <div class="left"> <hr /> <p> Kundennummer <input type="text" /> </p> </div> <div class="right"> <table> <tr> <td>Firma</td> <td><input type="text" name="company"required /></td> </tr> <tr> <td>Ort, PLZ</td> <td><input type="text" name="place" required /></td> <td><input type="number" name="plz" class="number" required /></td> </tr> <tr> <td>Straße, Nr.</td> <td><input type="text" name="street"required /></td> <td><input type="number" name="streetnr" class="number" required /></td> </tr> <tr> <td>Telefon</td> <td><input type="tel" name="tel" required /></td> </tr> <tr> <td>Fax</td> <td><input type="text" name="fax" required /></td> </tr> <tr> <td>E-Mail</td> <td><input type="email" name="email" required /></td> </tr> <tr> <td>Datum</td> <td><input type="date" name="date" required placeholder="tt.mm.jj"/></td> </tr> </table> </div> </section> <section id="submit"> <input type="checkbox" name="agb" required /> Ich habe die <a href="../docs/agb.pdf">AGB</a> gelesen und akzeptiere diese. <input type="submit" value="Bestellung Abschicken"/> </section> </form> <section id="footer"> <hr /> </section> </body> </html> Any Ideas why? The data is sent to a yet empty PHP document. The bracelets in the name tag are used to get an array. My PHP version is 5.3.8

Read the article

????: PostgreSQL??Oracle RAC????

- by Kumiko Fujita

?????????????????????????????????????????????????????????????????????????? ????????????????????????? * * * ?????????????????????????????????????DBMS??????????????????????????????DBMS????????????????????????????????????????????? 1. ???? ?????????????????????????????????????????????????????????????????????1?????? ???????????????? ?????????????????????????????DB???????OSS?PostgreSQL?????AP?????DB??????????????????? ???????? ?????10?????????????GB????????????????????????????DB?????????????????????????? ?????????????3,500?????????24????????????????????????????????????? ??AP?????????????????????????????????????????DB??PostgreSQL??????????????????PostgreSQL ????????????????????Vacuum????????????????????????????????????????????????????? ??????????????????PostgreSQL?OSS??????????????????????????????????????????????????DB MS??????Oracle Database 11gR2???????????????????????500GB???????????????????????????Partitioning ???????? Oracle Database Enterprise Edition?????????????????????????????????????????????? ????SAN?????Active/Standby???HA????????????????? 2. ????? 2.1. ???? PostgreSQL??????Oracle??????????????????????????????????????????????????????TEXT????? ????????????????????Oracle??????????????????????????PostgreSQL??csv???????Oracle Database?SQL*Loa der????????????? ??????????????????????????????DB??????????????Windows?Liunx??????????????????????? ????????????????????????????????????????????????? ?????????????PostgreSQL?NULL?????''????????????Oracle Database???????????????????????? ?????????? table { border-collapse: collapse; } th { border: solid 1px #666666; color: #000000; background-color: #ff9999; } td { border: solid 1px #666666; color: #000000; background-color: #ffffff; } ???? PostgreSQL Oracle Database ??? CHAR(n) CHAR(n),CLOB VARCHAR(n) VARCHAR2(n),CLOB TEXT CLOB ??? NUMERIC NUMBER INTEGER NUMBER SMALLINT NUMBER BIGINT NUMBER REAL NUMBER DOUBLE PRECISION NUMBER ??? DATE DATE TIMESTAMP TIMESTAMP ????? Bytea BLOB LOB BFILE/SecureFiles ??? OID ROWID 2.2. ????? ?????????????PostgreSQL?Oracle Database??????????SQL???????????????????????????????????Postg reSQL?LIMIT?OFFSET??Oracle Database?????????????????????? LIMIT,OFFSET???SELECT?????? /* PostgreSQL LIMIT,OFFSET */ SELECT ??? FROM ????? ORDER BY ???? LIMIT 2 OFFSET 5; /* Oracle Database????? */ SELECT ??? FROM (SELECT ???, ROWNUM line_no FROM (SELECT??? FROM ????? OREDR BY ???? ) ) WHERE line_no BETWEEN 6 AND 7; ??????????????????????????????????????????????????????????????????????????? ?????????????????? ????????????????????????????????????????????????Oracle Database??????????????????????Oracle Database????WHERE??????????????????????????????????????????????????????WHERE?????????????????????? 3. ???? ???????????????????????30%~40%????????????????????80%????????????????????? ?ITpro???:???????4????? ??????????????????????????????????? ·?????·??????????????????????????? ·????????????????????????????? ????????????????????????????????????????? 3.1. ??????? ????????????????????????????????????????·??????????????????????????????????? ???????????????????????????????????????????????????????·?????????????????? ???????????????????????????? (1)???????????????????? (2)???????????????????????????????????????????? (3)??????????????? (4)???????????????????????????????? ???????????·???????????????????????????????????????????????????????????????? ????????????????????? ????????·?? table { border-collapse: collapse; } th { border: solid 1px #666666; color: #000000; background-color: #ff9999; } td { border: solid 1px #666666; color: #000000; background-color: #ffffff; } ?? ?? ?? (1) ?????????? ????????????·???????????????????????? (2) ???????????????????? ?????????????????????????????? (3) ?????4????????????????? ???????????????????????DB????????? (4) ??????????(3)???????? ???????????????????????? ?????????????????????GB???????????????????????????????????????????(3)?????????? ??????? ??????????????????????????????????????????????csv??????????SQL*Loader?Oracle Database?????????????????????Oracle Database???????????????????????????INSERT????????????? ???????????????????????????????????????????????????????????????????????????? ?????????????????????? 3.2. ????? ???????????????????????????????????????????????????????????????????????????? ????????????????????????????????????????????????????????????????????????????????????????????? ?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? 3.3. ????? ??????????????????????????????????????????????????????????????????????????? ??????????????????????? DBMS????????????????????????SQL??????????????????????????????????????????????????PostgreSQL?Oracle Database???????????MVCC?????????????????????????Read Committed??????????????????????????????????????????????????????????????????????????????????? ????????????????DBMS?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? 4. ??? PostgreSQL??Oracle Database?????????????????????????????? ????????????·????????????????????????????????????? ??????4???????????????????????·??????????????????? ???????????????????????????????????????????????? ?????????????????????????????????????????????DBMS???????????????????DBMS???????? ?????SQL?????????????????????????????DB???????????????????????????? ???????????????????????????DBMS?????????????????????????????????????????????????????? ??????????????????????????????

Read the article

Why does Cacti keep waiting for dead poller processes?

- by Oliver Salzburg

sorry for the length I am currently setting up a new Debian (6.0.5) server. I put Cacti (0.8.7g) on it yesterday and have been battling with it ever since. Initial issue The initial issue I was observing, was that my graphs weren't updating. So I checked my cacti.log and found this concerning message: POLLER: Poller[0] Maximum runtime of 298 seconds exceeded. Exiting. That can't be good, right? So I went checking and started poller.php myself (via sudo -u www-data php poller.php --force). It will pump out a lot of message (which all look like what I would expect) and then hang for a minute. After that 1 minute, it will loop the following message: Waiting on 1 of 1 pollers. This goes on for 4 more minutes until the process is forcefully ended for running longer than 300s. So far so good I went on for a good hour trying to determine what poller might still be running, until I got to the conclusion that there simply is no running poller. Debugging I checked poller.php to see how that warning is issued and why. On line 368, Cacti will retrieve the number of finished processes from the database and use that value to calculate how many processes are still running. So, let's see that value! I added the following debug code into poller.php: print "Finished: " . $finished_processes . " - Started: " . $started_processes . "\n"; Result This will print the following within seconds of starting poller.php: Finished: 0 - Started: 1 Waiting on 1 of 1 pollers. Finished: 1 - Started: 1 So the values are being read and are valid. Until we get to the part where it keeps looping: Finished: - Started: 1 Waiting on 1 of 1 pollers. Suddenly, the value is gone. Why? Putting var_dump() in there confirms the issue: NULL Finished: - Started: 1 Waiting on 1 of 1 pollers. The return value is NULL. How can that be when querying SELECT COUNT()...? (SELECT COUNT() should always return one result row, shouldn't it?) More debugging So I went into lib\database.php and had a look at that db_fetch_cell(). A bit of testing confirmed, that the result set is actually empty. So I added my own database query code in there to see what that would do: $finished_processes = db_fetch_cell("SELECT count(*) FROM poller_time WHERE poller_id=0 AND end_time>'0000-00-00 00:00:00'"); print "Finished: " . $finished_processes . " - Started: " . $started_processes . "\n"; $mysqli = new mysqli("localhost","cacti","cacti","cacti"); $result = $mysqli->query("SELECT COUNT(*) FROM poller_time WHERE poller_id=0 AND end_time>'0000-00-00 00:00:00';"); $row = $result->fetch_assoc(); var_dump( $row ); This will output Finished: - Started: 1 array(1) { ["COUNT(*)"]=> string(1) "2" } Waiting on 1 of 1 pollers. So, the data is there and can be accessed without any problems, just not with the method Cacti is using? Double-check that! I enabled MySQL logging to make sure I'm not imagining things. Sure enough, when the error message is looped, the cacti.log reads as if it was querying like mad: 06/29/2012 08:44:00 PM - CMDPHP: Poller[0] DEVEL: SQL Cell: "SELECT count(*) FROM cacti.poller_time WHERE poller_id=0 AND end_time>'0000-00-00 00:00:00'" 06/29/2012 08:44:01 PM - CMDPHP: Poller[0] DEVEL: SQL Cell: "SELECT count(*) FROM cacti.poller_time WHERE poller_id=0 AND end_time>'0000-00-00 00:00:00'" 06/29/2012 08:44:02 PM - CMDPHP: Poller[0] DEVEL: SQL Cell: "SELECT count(*) FROM cacti.poller_time WHERE poller_id=0 AND end_time>'0000-00-00 00:00:00'" But none of these queries are logged my MySQL. Yet, when I add my own database query code, it shows up just fine. What the heck is going on here?

Read the article

Integrating HP Systems Insight Manager into an existing environment

- by ewwhite

I'm working with an environment that spans multiple data centers/sites and consists primarily of HP ProLiant servers (G5-G7) running Linux. The mix is 30% RHEL/CentOS, the rest are Gentoo :(. I also have a few dozen virtual machines running back-office and Windows servers on VMWare ESX hosts. I run OpenNMS to pull SNMP data from the various server nodes and networking devices. While OpenNMS works wonderfully for up/down, thresholds and notifications, it's native handling of traps is a little rough and the graphs are not particularly pretty. I use Orca/RRD graphs for performance trending and nice graphs. I'm tasked with inventorying the environment and wanted to come up with a clean way to organize server information. Since my environment is mostly HP, I've been playing with HP Systems Insight Manager as a way to extract server data and to deploy HP health/monitoring packages and firmware. The Gentoo systems eventually have to be converted to CentOS, so getting a quick assessment of what hardware is where would be great. Although I've read through a few hundred pages of HP manuals, I'm having a difficult time understanding how to get HP SIM to do what I want, though. My main problems are: I have about 40 subnets to deal with; 98% connected with private lines to facilities across the globe. I don't want to initiate an HP SIM discovery only to pull back every piece of intermediate networking hardware and equipment from all of the locations. I'd like this to focus on the servers. I have OpenNMS configured to accept traps. I don't want HP SIM to duplicate that effort. It seems like the built-in software deployment tool wants to overwrite the trapsink parameters for the systems it encounters during discovery. I have about 10 administrative username/password combinations in use across this infrastructure. Is there a more efficient way to get HP SIM to do the discovery or break discovery into manageable chunks? In terms of general workflow, do people typically install the HP Management Agents during the initial OS deployment (e.g. kickstart post script) or afterwards from HP SIM? Is HP SIM too thick/fat to be an inventory tool? I can't tell if it's meant to be used standalone or alongside other monitoring products. Since the majority of the systems I'm trying to track are those running Gentoo (in order to plan the move to CentOS), is there any way for HP SIM to extract system model information from them ( like dmidecode)? I have systems here where I may have an SSH key established, but not direct user or login access. Is there a way for me to import an SSH private/public key pair into HP SIM to reach out to the servers that can't accept standard credentials? There are a handful of sites where I have inconsistent access or have a double-NAT situation. I may be able to poke a server, but it may not be able to find its way back to the management system. Is there a workaround for this? The certificate configuration for HP SIM seems complicated. What is the preferred setup for trust between systems? I'd also appreciate any notes or recommendations to using this product. Or if there's a better way to do this, I'd like to know.

Read the article

proftpd, dynamic IP, and filezilla: port troubles

- by Yami

The basic setup: Two computers, one running proftpd, one attempting to connect via filezilla. Both linux (xubuntu on the server, kubuntu on the client). Both are at the moment behind a router on a residential (read: dynamic IP) connection; the client is a laptop I plan to take away from the home network, so I'll need this to work externally. I have my router set up to allow specific ports forwarded to each machine and, where possible, have plugged in those numbers into proftpd (via gadmin, double-checking the config file) and filezilla. Attempting to connect via active mode using the internal IP works: Status: Connecting to 192.168.1.139:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 192,168,1,52,153,140 Response: 200 PORT command successful Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Status: Directory listing successful Attempting to connect via the domain name, however, leads to issues; in active mode, the PORT is the last command to be received according to the server's logs, and in passive mode, it's the PASV command. This leads me to believe I'm being redirected to a bad port? Active Sample: Status: Resolving address of <url> Status: Connecting to <ip:port> Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 174,111,127,27,153,139 Response: 200 PORT command successful Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing Passive sample: Status: Resolving address of ftp.bonsaiwebdesigns.com Status: Connecting to 174.111.127.27:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER yamikuronue Response: 331 Password required for yamikuronue Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (64,95,64,197,101,88). Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing In both cases, the log file ends at "PORT" or "PASV" - there's no record of ever receiving a "LIST" command. Just above that I can see the attempt to connect actively via the internal IP, which does indeed include a LIST command. My config file includes "PassivePorts 20001-26999", which are the port forwards I set up for the ftp server, and "Port 8085", which is also forwarded to the same machine. I also have a MasqueradeAddress set up to prevent it from reporting its internal IP, which was an earlier issue I had. I think what I'm asking is, is there another setting someplace I have to change to get this setup to work?

Read the article

BSOD & System Failure after trying to install a new RAM

- by Praveen Kumar

I have updated the question with sections, so that people won't find it difficult to read. Basic System Information Let me give a basic introduction on my system. I have a system of following configuration: Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz 3.40GHz RAM: Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9) x 2 OS: Windows 7 Ultimate, SP1 Build 7601 HDD: 1 TB Seagate 7200 RPM The Problem It was working fine for about an year. Yesterday I planned to increase my RAM to 16 GB by putting another set of two Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9). I got it from an authorized reseller and also, the RAM was fitted by a service engineer only. After the RAM was fit (all the four), the system failed to start, with an error code of 0x000000f4. The complete information of it is: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 16393 Additional information about the problem: BCCode: f4 BCP1: 0000000000000003 BCP2: FFFFFA8008A39060 BCP3: FFFFFA8008A39340 BCP4: FFFFF800037C8510 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\093012-13041-01.dmp C:\Users\Praveen Kumar\AppData\Local\Temp\WER-30716-0.sysdata.xml Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt Another Problem We first thought that it was the RAM, which caused the issue. So I returned the RAMs and now my computer configuration is exactly how it was the previous day. But, following the removal of the RAM, I also had several crashes after that. One suspicious thing was with an error code c0000134: STOP: c0000135 The program can’t start because %hs is missing from your computer . Try resintalling the program to fix this problem. After reading contents from this, this and this, which were never my case, they didn't help me. But I didn't receive any more STOP c0000134 messages. But this 0x000000f4 keeps on coming. I am writing from the same system and it allows me to work for say, half an hour max. Then I hear a device disconnect sound, the one you hear in Windows 7, when a USB Mass Storage Device is plugged out. Immediately following that, my screen goes blank and I get 0x000000f4 blue screen. Okay, now I am really concerned about my Hard Disk data, but I have no clue if there is a problem with the HDD. My Question What all files do I need to submit for your reference? Can this issue be fixed? I am getting more time if I remove my RAM, clean it and then put it back. Weird! Hope I have given the necessary information to help you guys. Thanks in advance. Minidumps I have uploaded all the Minidump DMP files from C:\Windows\Minidump folder here: http://www.praveen-kumar.com/Minidumps.zip Let me know if you face any issues in accessing it. Will be able to share elsewhere. Updates 30-Sep-2012 10:15 AM IST: When I keep the system cover opened, pressed the HDD Cable well, it is allowing me to be on for about half an hour, I guess? Also, I feel that the CPU fan speed is kind of slow. It rotates at around 900 RPM, but the CPU Temperature is not more than 70° C. 30-Sep-2012 10:30 AM IST: My Modem (Beetel 220BX ADSL2+ Router) failed. I have no idea how it is related to this issue, but I thought that I need to document this too. I really have a bad day here. 30-Sep-2012 11:00 AM IST: System still running fine, with the cabinet cover open, now for about an hour. 30-Sep-2012 12:00 PM IST: I shut down the system and closed the cabinet. Started the system, and it hung after giving the password. After a few minutes, got the same 0x000000f4 error. So, while it is in the upright position, fixed the Hard Disk cable and now it is booting fine. Waiting for more observations and answers.

Search Results

Search found 11537 results on 462 pages for 'double submit prevention'.

Page 415/462 | < Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422 | Next Page >

- by mbcrump

- by Eric Bezille

- by Mahalia Samuels

- by hmloo

- by AjarnMark

- by David Dorf

- by kyap

- by Maria Sandu

- by jamiet

- by MarkPearl

- by pangaea

- by MarkPearl

- by arungupta

- by Laurent Bugnion

- by Cherry

- by user3529643

- by Fat Bloke

- by bodycountPP

- by Mike Stiles

- by user1392411

- by Kumiko Fujita

- by Oliver Salzburg

- by ewwhite

- by Yami

- by Praveen Kumar

< Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422 | Next Page >