Search Results

Search found 13947 results on 558 pages for 'television shows'.

Page 415/558 | < Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >

• Trying to retrieve data with a thermaltake blacX enclosure: Windows 7 believes the drive to be "uninitialized"

  - by Peeter Joot

  I have a laptop that won't boot. It appears to be a power problem ... laptop auto-turns-off within about 10 seconds of pressing the power button (with power buttons lighted temporarily and no display with or without external monitor). I've followed the dell troubleshooting guide which suggested reseating the memory modules and the hard drives, but that didn't help. Before trying to have the laptop serviced, I wanted to get some data off off the hard drive. I bought a thermaltake blacX enclosure, intending to use this to both use to retrieve the drive data with, and then later use as external storage. Following the instructions (insert cables, insert drive power on) goes fine, and Windows 7 on another laptop installs the device driver software. However, no drive letter shows up in 'Computer'. Under Computer-manage-storage I see the drive is there, and there's an option to "initialize" the drive. The Windows "initialize" dialog gives me the option to pick between "MBR" and "GPT" partitioning, which sounds like a good way to destroy the data on the drive. I'm thinking that I've purchased the wrong device for the job (or that my old drive is damaged). The old drive to recover info from is a Western Digital 500G/7200rpm SATA drive if that is relavent. Both the original laptop and the one I'm using for recovery are running Windows 7. Does anybody have experience with using a blacX enclosure to recover data off an already formatted drive?

  Read the article

• Cannot terminate process, "already terminated"

  - by felix-freiberger

  On Windows 8, I regularly get processes into a state where I can't terminate them. Skypekit.exe seems to be the process that's most likely to trigger that issue, but other processes can do that, too. When I try to terminate these processes, I sometimes get an "access denied" message, sometimes nothing happens - but every following attempt to kill that process results in an "access denied" message, too, even though I... have administrative rights (and ran the task manager with it) own that process have the right to terminate it "Process Hacker 2" shows a more detailed error message, stating that I couldn't terminate the process because it already is terminated. Still, the process is most definitely still there, because every task manager I tested still can see it. Process Hacker's "Terminator" is unable to kill such a process, but when running the "Close the process' handles" tactic, Process Hacker gets stuck himself, leaving its windows in "not responding". In that state, other task managers are in turn unable to kill Process Hacker. The only way I found to actually end these processes is to shutdown (which works without any problems). Why is this happening? How can I kill these processes?

  Read the article

• Local Network - Windows 7 and Vista can't see each other

  - by ca8msm

  I've got a strange issue at home that has been bugging me for weeks, but I really need to get it sorted now so I'll detail as much as I can and hopefully someone can spot what might might be wrong. I have a wireless router connected to the internet and 3 devices connected to it. They are: Name OS Network IPv4 PC1 Windows 7 WORKGROUP 192.168.2.2 LAPTOP1 Vista WORKGROUP 192.168.2.3 PS3 192.168.2.4 and they all get their IP addresses dynamically. Both PC1 and LAPTOP1 can ping PS3 and get a response. PC1 and LAPTOP1 are unable to ping each other by ip address unless I ping by their name (which bizarrely shows that it is pinging via the IPv6 address). Also, to confirm this both PC1 and LAPTOP1 can ping each other via the long IPv6 address that they both have so they can obviously see each other just not via IPv4. I've disabled the firewalls on both machines as well to rule that out. I don't really know what IPv6 is used for and I've tried disabling it on both machines but all that happens then is that neither machine can see each other at all then. Does anyone have any idea of what may be stopping them seeing each other, any ways I can look at fixing this, or any network tools that may help identify where it is failing? Thanks, Mark

  Read the article

• Firefox url / link to a group of saved bookmarks?

  - by This_Is_Fun

  In Firefox you can easily save a group of tabs together. When (re-)accessing this group, the 'cascading' bookmark menu shows each individual bookmark (and under a line) it says "open all in tabs" I'm looking for a way to launch those tabs without going up through the bookmark menu. Possible options: A) Record a simple macro w/ any number of "superuser" utilities* ('A' is not the preferred option, since many 'little-macros' are hard to keep track of) b) Use Autohotkey (similar to option 'A' and more flexible once you learn the basics) c) How does Firefox load all those tabs? The info must be stored somewhere (as a type of URL??) Quick Summary: The moment I click on "open all in tabs", I am clicking on something very similar to a hyper-link. How do I find the content (exact code) of that 'hyper-link', and / or "How do I easily launch the tabs?" .. . New EDIT #1: I'm looking for a way to launch those tabs without going up through the bookmark menu, or cluttering the bookmarks toolbar which I hide anyway :o) .. . New EDIT #2: I tried to keep the question simple and not mentioning Autohotkey programming. The objective is to launch all tabs using a button on an AHK gui. When grawity said, "It's just an ordinary folder containing ordinary bookmarks," he (she) reminds me I can easily find the folder / Now how to launch to urls inside that folder? .. FYI: (Basic-level) AHK works like this: ; Open one folder ButtonWinMerge_Files: Run, C:\Program Files\WinMerge\ Return .. ; Use default web browser for one link ButtonGoogle: Run, http://google.com Return .. . Question still open: The moment I click on "open all in tabs", I am clicking on something very similar to a hyper-link. "How to 'replicate' the way Firefox launches the tabs with one click?"

  Read the article

• Allowing directory view/traversal for a specific VirtualHost in Apache 2.2

  - by warren

  I have the following vhost configured: <VirtualHost *:80> DocumentRoot /var/www/myvhost ServerName myv.host.com ServerAlias myv.host.com ErrorLog logs/myvhost-error_log CustomLog logs/myvhost-access_log combined ServerAdmin [email protected] <Directory /var/www/myvhost> AllowOverride All Options +Indexes </Directory> </VirtualHost> The configuration appears to be correct from the apachectl tool's perspective. However, I cannot get a directory listing on that vhost: Forbidden You don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. The error log shows the following: [Wed Mar 07 19:23:33 2012] [error] [client 66.6.145.214] Directory index forbidden by Options directive: /var/www/****** update2 More recently, the following is now kicking-into the error.log: [Wed Mar 07 20:16:10 2012] [error] [client 192.152.243.233] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/error/noindex.html update3 Today, the following is getting kicked-out: [Thu Mar 08 14:05:56 2012] [error] [client 66.6.145.214] Directory index forbidden by Options directive: /var/www/<mydir> [Thu Mar 08 14:05:56 2012] [error] [client 66.6.145.214] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/error/noindex.html [Thu Mar 08 14:05:57 2012] [error] [client 66.6.145.214] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace. This is after modifying the vhosts.conf file thusly: <VirtualHost *:80> DocumentRoot /var/www/<mydir> ServerName myhost ServerAlias myhost ErrorLog logs/myhost-error_log CustomLog logs/myhost-access_log combined ServerAdmin admin@myhost <Directory "/var/www/<mydir>"> Options All +Indexes +FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> What is missing? update 4 All subdirectories of the root directory do directory listings properly - it is only the root which cannot.

  Read the article

• Mysql server high trafic makes websites really slow or unable to load

  - by Holapress

  Lately we have been having a lot of problems with our mysql server, from websites being really slow or even unable to load them at all. The server is a dedicated server that only runs our mysql database. i have been running some test using a profiler (JetProfiler) and tool to stress test (loadUI). If I use loadUI to connect with 50 simultaneous connections to one of our websites that runs a resently big query it will already make the website be unable to load. One of the things that makes me worried is that when I look at Jetprofile it always shows a Treads_connected of 1.00 and it seems that when it hits around 2.00 that I'm unable to connect. The 3 big peaks are when I run a test with loadUI, first one was 15 simultaneous connections wich made it still able for me to load the website but just really slow, the second one was 40 simultaneous connections which already made it impossible to load and the third one was with 100 connection which also didn't make it load anymore. Another thing that worries me is that in JetProfiler it says all the queries that get used are full table scans, could this maybe be the problem? The website I run as a test runs 3 queries, one for a menu that outputs around 1000 rows, one for the adds that has around 560 rows and a big one to get posts that has around 7000 rows (see screenshot bellow) I also have monitored the cpu of the server and there seems to be no problem there, even when I make a lot of connections with loadui the cpu stays low. I can't seem to figure out what is the main cause of the websites being unable to load when there is a high amount of traffic, if anyone has other suggestions for testing or something that might cause the problem please let me know.

  Read the article

• What's Keeping My Computer Awake?

  - by phantomdata

  First the question; How do I figure out what is preventing my Windows 7 computer from going into sleep mode? Second; some background... I've been struggling with this for a few days and am utterly perplexed. I setup sleep mode on my Windows 7 PC a few weeks ago, and all was well. The PC would sleep as expected and I was snuggly in knowing that my computer was saving power and some wear and tear on the components (we'll leave the 'is it better to sleep' debate for another thread/day, please don't start it). Well, I noticed the other night that my system stopped ever going to sleep. I set the sleep time down to 1 minute and wandered fully away from the PC (ensuring that no errant mouse or keyboard movements would occur) and the PC never went to sleep. I've also observed this over longer intervals as well, such as overnight. I have sleep mode enabled, of course "multimedia settings - When Sharing Media" is set to allow the computer to sleep. "powercfg -lastwake" show nothing of interest, since it never goes to sleep and can't wake up. "powercfg /requests" shows 3 entries - all "[DRIVER] ?". I assume that 2 of these are my mouse and keyboard - as I've recently used them to run the powercfg command. I'm at a loss for the third though. I've unhooked all USB peripherals save for my keyboard and mouse. Wake on LAN is disabled in my BIOS. I know that you can disable all apps from waking/preventing sleep - but I want the ability to remain for those apps that do legitimately need to keep the system awake. So; does anyone know of a way to figure out what the 3rd phantom "[DRIVER] ?" is in powercfg /requests?

  Read the article

• centos install / partitioning

  - by ServerSideX

  I'm using NOC-PS to remotely install Centos 6.2 via KVM / IPMI. I'm going to install cPanel as well and they recommend this layout /boot (99MB) swap (2x server RAM) / (remainder) In the o/s install profile within NOC-PS software, it shows as this: part /boot --fstype ext2 --size 250 part pv.01 --size 1 --grow volgroup vg pv.01 logvol / --vgname=vg --size=1 --grow --fstype ext4 --fsoptions=discard,noatime --name=root logvol /tmp --vgname=vg --size=1024 --fstype ext4 --fsoptions=discard,noatime --name=tmp logvol swap --vgname=vg --recommended --name=swap By the time the default partition setup was done installing Centos, I get this [root@server005 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg-root 532G 907M 504G 1% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 243M 28M 202M 13% /boot /dev/mapper/vg-tmp 1008M 34M 924M 4% /tmp [root@server005 ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Dec 7 18:47:24 2012 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/mapper/vg-root / ext4 discard,noatime 1 1 UUID=58b31aaf-5072-4fb1-a858-33bc316fa793 /boot ext2 defaults 1 2 /dev/mapper/vg-tmp /tmp ext4 discard,noatime 1 2 /dev/mapper/vg-swap swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 My question is, how should the NOC-PS install profile look like to get the recommended cPanel partitioning? The server has 16GB RAM, dual 600GB SAS drives and will be used for cPanel shared hosting.

  Read the article

• Compare-Object gives false differences

  - by Andy

  I have some problem with Compare-Object. My task is to get difference between two directory snapshots made at different times. First snapshot is taken like this: ls -recurse d:\dir | export-clixml dir-20100129.xml Then, later, I get second snapshot and load both of them: $b = (import-clixml dir-20100130.xml) $a = (import-clixml dir-20100129.xml) Next, I'm trying to compare with Compare-Object, like that: diff $a $b What I get is in some places files that were added to $b since $a, but in some -- files that were in both snapshots, and some files, that were added to $b, are not given in Compare-Object output. Puzzling, but $b.count - $a.count is EXACTLY the same as (diff $a $b).count. Why is that? Ok, Compare-Object has -property param. I try to use that: diff -property fullname $a $b And I get the whole mess of differences: it shows me ALL the files. For example, say $a contains: A\1.txt A\2.txt A\3.txt And $b contains: X\2.mp3 X\3.mp3 X\4.mp3 A\1.txt A\2.txt A\3.txt diff output is something like that: X\2.mp3 => A\1.txt <= X\3.mp3 => A\2.txt <= X\4.mp3 => A\3.txt <= A\1.txt => A\2.txt => A\3.txt => Weird. I think I don't understand something crucial about Compare- Object usage, and manuals are scarce... Please, help me to get the DIFFERENCE between two directory snapshots. Thanks in advance UPDATE: I've saved data as plain strings like that: > import-clixml dir-20100129.xml | % { $_.fullname } | out-file -enc utf8 a.txt And results are the same. Here're excerpts of both snapshots (top 100-something lines, a.txt and b.txt), output of compare-object, and output of UNIX diff (unified). All files are UTF-8: http://dl.dropbox.com/u/2873752/compare-object-problem.zip

  Read the article

• Virtualhost one https site, the rest http

  - by RJP1

  I have a linode server with Apache2 running a handful of sites with virtualhosting. All sites work fine on port 80, but one site has a ssl certificate and also runs okay. My problem is as follows: The non-https sites, if visiting https://domain.com - show the contents of the only secure site... Is there a way of disabling the *:443 match for these non-secure sites? Thanks! EDIT (more information): Here's a typical config in sites-available for a normal insecure http site: <VirtualHost *:80> ServerName www.insecure.com ServerAlias insecure.com ... </VirtualHost> The secure https site is as follows: <VirtualHost *:80> ServerName www.secure.com Redirect permanent / https://secure.com/ </VirtualHost> <VirtualHost *:80> ServerName secure.com RedirectMatch permanent ^/(.*) https://secure.com/$1 </VirtualHost> <VirtualHost *:443> SSLEngine on SSLProtocol all SSLCertificateChainFile ... SSLCertificateFile ... SSLCertificateKeyFile ... SSLCACertificateFile ... ServerName secure.com ServerAlias secure.com ... </VirtualHost> So, visiting: http:/insecure.com - works http:/www.insecure.com - works http:/secure.com - redirects to https:/secure.com - works http:/www.secure.com - redirects to https:/secure.com - works https:/insecure.com - shows https:/secure.com - WRONG!

  Read the article

• How to use the outcome of a formula as the value for Vlookup or another IF formula

  - by Steven

  Ok I will try to explain my issue effectively. I am making a GPA sheet in which the value out of 100 is computer in to a GPA value and then in to a letter. In cell N5 i have the value of all their grades (formula: =H3+H4+H5) Now in cell (j6) I have a formula which is giving them a number depending on the value calculated in N5 (Formula: =IF(AND(N5>=60,N5<=63.999),"2.0",IF(AND(N5>=64,N5<=66.999),"2.25",IF(AND(N5>=67,N5<=69.999),"2.4",IF(AND(N5>=70,N5<=73.999),"2.5",IF(AND(N5>=74,N5<=76.999),"2.75",IF(AND(N5>=77,N5<=79.999),"2.9",IF(AND(N5>=80,N5<=83.999),"3.0",IF(AND(N5>=84,N5<=86.999),"3.25",IF(AND(N5>=87,N5<=89.999),"3.4",IF(AND(N5>=90,N5<=93.999),"3.50",IF(AND(N5>=94,N5<=96.999),"3.75",IF(AND(N5>=97,N5<=100),"4",IF(AND(N5<=59.999),"0"))))))))))))) Still no problem... as the values I was looking for comes out (example 84.2 shows up as 3.25 as I wanted). However here comes the problem.... I have tried to use the outcome in J6 to do Vlookup or another if formula, however excel does not seem to recognize the value in J6. For example: =VLOOKUP(j6,B3:C15,2,FALSE)... this returns N/A however if I enter =VLOOKUP(3.25,B3:C15,2,FALSE) it gives me what im looking for. It seems that excel will not register the outcome of my formula as a number. What can I do please?

  Read the article

• Windows 7 doesn't start anymore

  - by 0xFF

  I've experienced some BSOD on windows 7 RC, and some freezing when startup, but today was big surprise, it doesn't start anymore. I tried to start on safe mode and no results too, it shows the starting animation, then a blue screen for less than a second and turns off immediately. The only thing I remember did today is update flash player under Firefox, then chrome stopped working even after logging off, and once restarting, it doesn't start anymore. Anyone experienced the same issue? any hints? [EDIT 3] Solved : Windows 7 have a very smart repair strategy, it works automatically, and it tried every possible fix, what fixed my problem was the system restore to a previous date, all this happened automatically. [EDIT2] these are the last lines in the ntbtlog.txt file Did not load driver \SystemRoot\System32\drivers\vga.sys Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Loaded driver \SystemRoot\system32\drivers\CHDRT32.sys Loaded driver \SystemRoot\system32\DRIVERS\VSTAZL3.SYS Loaded driver \SystemRoot\system32\DRIVERS\VSTDPV3.SYS Loaded driver \SystemRoot\system32\DRIVERS\VSTCNXT3.SYS Loaded driver \SystemRoot\system32\drivers\modem.sys Loaded driver \SystemRoot\system32\DRIVERS\usbccgp.sys Loaded driver \SystemRoot\System32\Drivers\usbvideo.sys [edit] this is the BSOD I get : http://twitpic.com/i87cx Thank you.

  Read the article

• How to slave a 3.5" 500gb SATA external hard drive (Western Digital) to my Dell Inspiron laptop

  - by AJ HDD

  I have a 3.5" Western Digital My Book 500gb external hard drive. I gave it to a friend of mine, and he broke the USB port in it. I went to a nearby comp repair shop and had him solder the thing, and it didn't detect when it when I plugged it into my Dell Inspiron laptop. I recently saw about the 3.5" SATA to USB enclosure, so I went to check it. Strangely, when its placed in the enclosure, its not detecting in Windows. Also, when it was put as secondary (I'm guessing slave) to the shop fellow's desktop, it shows up in the BIOS and while starting, but then again doesn't show in Windows 7. The guy told me that I need to use a data recovery tool to get my data back. P.S. Whe WD hard drive doesnt have an OS, just data. So my question is: Can I slave the drive to my Dell laptop and try to recover the data, and if so how? I would really appreciate it any help, thanks in advance.

  Read the article

• VMware guest pauses when the host is idle - how do I keep it running?

  - by EMP

  I'm running VMWare Worstation 7 with Windows 7 x64 as guest, Windows XP x64 as host. Inside the guest I run a long-running console application, which prints out progress messages with timestamps on them. Sometimes I leave it running for several hours while I lock the host OS and don't touch the computer at all. When I come back I find that some time after I left it seems to have paused and automatically resumed: the console app hasn't made much progress and there's a large time gap in its progress messages. There's nothing relevant in the host event log, but in the guest Application event log I can see these messages around the time I left: A request to disable the Desktop Window Manager was made by process (VMware Tools Service) The Desktop Window Manager was unable to start because composition was disabled by a running application And later, around the time I returned, this shows up in the System log: The system time has changed to ?2012?-?01?-?12T06:36:46.921000000Z from ?2012?-?01?-?12T03:18:19.953079000Z. That seems to support my theory that it's VMware doing something and not Windows itself. The question is: how do I stop it doing that? I want my application to continue running. By the way, the power options are set to never sleep in both guest and host.

  Read the article

• Recovering data from an external hard drive

  - by CCallaghan

  I have a WD Elements 2GB hard drive (formatted NTFS). I accidentally kicked out the USB cable while writing data to the disk, and now I can't access most of the data. Although this was ostensibly my backup drive, there is a great deal of important material on there which was only on there. I realise how idiotic this makes me. (So, formatting is not an option.) Things I've tried/information I've gathered: Windows Explorer will recognise the drive itself. However, it will not access most directories therein (and will sometimes crash when exploring). I can access all of the directories through the command line, but the dir command will often report that it can't read any files in most of the directories. The situation was similar when I hooked it up to an Ubuntu machine: the file explorer crashed, but I could access directories - but not files in those directories - via terminal commands. Several files I tried to copy out either resulted in an I/O error being reported or resulted in the command line crashing. The Disk Management utility on Windows reports a healthy disk formatted as NTFS and not RAW. It also indicates the correct amount of space used up and its capacity (so it seems that the files are not deleted). I've tried to run chkdsk, but that hangs on Step 2 (checking indexes) at 74%. Step 1 reported no bad sectors. I tried Recuva, but that didn't seem to work (stalled at 0% for half an hour). I should also note that the disk doesn't seem to be spinning smoothly; it seems to be chopping back, like it's reading the same sector over and over again. I noticed this after I kicked out the cable. Any help would be greatly appreciated. Update: It would seem the problem has taken a turn for the worse. The external hard drive now shows up on my computer as a local disk and is not mountable by Linux.

  Read the article

• Why are all of my ZFS snapshot directories empty?

  - by growse

  I'm running an Oracle 11 box as a ZFS storage appliance, and I'm taking regular snapshots of the ZFS filesystems, via cron. In the past, I know that if I wanted to grab a particular file from a snapshot, a read-only copy was kept in .zfs/snapshot/{name}/ and I could just navigate there and pull the file out. This is documented on Oracle's website. However, I went to do this the other day, and noticed that the ZFS directories within the snapshot directories are all empty. zfs list -t snapshot correctly shows the list of snapshots that should be present, and .zfs/snapshots correctly contains a directory for each snapshot, and in each snapshot there is a directory present for each ZFS filesystem. However, these directories appear to be empty. I just tested a restore by touching a file in a little-used share and rolling back to the latest hourly snapshot, and this appears to have worked fine. So the rollback functionality is there. Did Oracle change how snapshots are done? Or is something seriously wrong here?

  Read the article

• Windows 7 does not detect my new hard drive?

  - by jasondavis

  I just built a really nice new PC. Some specs... Intel i7-930 CPU ASRock Extreme X58 motherboard with sata 3 and USB 3.0 12gb of G-Skill DDR3 RAM 80gb Intel G2 Solid state drive for Windows 7 and other programs to run on Windows 7 Pro 64bit OS 2 1gb grapghic cards for 4 monitor support Thats the main components. Well today my new 1tb western digital hard drive came which I plan to use for data to preserve the life of my SSD (hopefully). I hooked up it's sata power input and then hooked up it's sata data cable to a sata 2 port on my motherboard, I boot windows 7 and go into my computer and the drive is not showing up with my other drives. I then re-boot again and check again, no luck. I then shut down the PC and open the case back up, I then check my connections and they all look good. I then boot up and I can see the new HD is on and spinning. I then go into my BIOS settings to see if it registers there and it DOES! It shows I have a WD 1tb hard drvie on sata 2 port 6. So I am at a loss of why it is not showing up as an option in windows? Windows acts as if the drive is not there. Please help

  Read the article

• Reset sound volume in Windows 8

  - by Svish

  There seems to be a bug in Windows 8 causing the maximum volume to become lower than it really should be. I'm now at a stage where I put the volume up to max and the sound is still very low. I have a couple of Logitech Z-10 speakers with a display on them and when I touch the increase volume button on that it shows me the volume (but not able to increase it) is actually below middle even though Windows claims it to be maxed out. Is there any way I can reset the volume in Windows 8 so that I can get it up fully max again? A registry setting or something? Really don't want to have to reinstall windows or drivers or anything like that cause if it is a bug it'll probably happen again and I really don't want to have to do that every time this happens :p Any ideas? Manged to fix it by unplugging the usb connection to my speakers, turning the volume down on my computer and up on the speakers, and finally reconnecting the usb connection. Seems to have been an issue with the speakers and not Windows this time. BUT, I'm still curious how you can adjust/reset the Windows 8 sound volume without using the volume controls. Like, where is the value of the current volume setting(s) really stored? And can you manually adjust them?

  Read the article

• Windows 8 install from USB freezes

  - by Rafael Almeida

  I'm trying to install Windows 8 from an 8GB Kingston Data Traveler. I'm currently using the Windows 7 USB DVD Download Tool to put the iso into the flash drive. It copies the files, but in the end it says it 'had a problem with bootsect' and could not make the flash drive bootable. This seems to be because my current system is Windows 7 32bits, and the bootsect.exe in the ISO is a 64-bit executable. Then I downloaded the 32-bit bootsect.exe and made the drive bootable by running: bootsect /nt60 E: /mbr Then I restarted and managed to boot via the flash drive, but now everything is very slow. It takes about two minutes for the initial black screen with the Windows logo and the spinner go away, then it goes to a purple-ish blank screen that stays on for about five more minutes and then it finally shows a dialog asking for the installation, date/time and keyboard languages. I input then, click "Install Now" and it takes about three more minutes with a "Setup is starting" screen. After that, the PC apparently reboots, the CPU fan speeds up considerably, and there's no video and nothing more happens even after more than ten minutes. What is happening? I already tried using another USB port and even installing from a Samsung G3 Station 2TB external hard disk, but the same thing happens. The file transfer speed to the Kingston drive was about only 3 megabytes per second.

  Read the article

• Cannot change power button or lid close action

  - by Mark Henderson

  I have a Samsung 900x laptop and I want to change it so that when I close the lid, nothing happens (I often close the lid to carry it somewhere 10 seconds away, and by putting it into suspend it cancels any active downloads/etc). Easy, right? Go to Power Options and change it there; just like on every other laptop in the world. Not so fast: Saywhat?! That message only shows up for the nodes for Lid Close Action, Power Button and Sleep Button. I can change every other setting except for those three. I'm definately an Administrator on the computer, and I've googled the error and found dozens of hits on other crappy forums, but of course nothing on those worked (otherwise, I wouldn't be here). And as ususal the "Why can't..." hyperlink gives no useful infomation what so ever (just a generic Help document). So - how can I change what closing the lid does? I will modify the registry directly if I have to.

  Read the article

• How to add a writable folder to the PHP document root on linux

  - by Ron Whites

  We are building an example bash script for our PHP TestCoverage Tool use on Linux. The development environment is Ubuntu 12.04_1 but we intend to have the linux example work across as many linux versions as possible without modification. The example linux script requires a variable be set to the PHP Document Root path and by default uses a small PHP example source to show the user how our GUI and text report shows the covered and uncovered PHP code areas. The linux script is also intended to be easily alterable by the user to automate the TestCoverage display of users PHP code. The problem we are having with Ubuntu 12.04 (any linux?) is that the PHP Apache2 document root is defined in /etc/apache2/sites-available/default as /var/www and /var/www is defaulted with "drwxr-xr-x" read only access. So in order to add our own folder as /var/www/SDTestCoverage we must change /var/www to "drwxrwxrwx" read-write access. So it seems our script (at least on Ubuntu) will need to ... 1. acquire and save the /var/www permissions then do .. 2. sudo chmod 777 /var/www (to make writable) 3. mkdir -p /var/www/SDTestCoverage (create our folder under the document root) 4. sudo chmod 777 /var/www/SDTestCoverage (make our subfolder writable) 5. and finally restore /var/www permissions Thanks and our Questions are .. 1. Is this the standard way (using Ubuntu) one adds a writable folder under the PHP Document Root? 2. Is this the most general purpose way one adds a writable folder under the PHP Document Root on other versions of Linux?

  Read the article

• How do I speed up and cache mmap file access over NFS on Linux?

  - by Zan Lynx

  The server and client are both 64-bit Ubuntu 10.04 LTS. The application in question is a custom app that uses mmap() for fast random file access. Its ideal state is when the entire file is cached in RAM. The network connections are really fast 10Gb Ethernet. It is a virtual server blade setup. It isn't the network connections slowing things down because everything performs superbly when using a virtual disk (iSCSI to the SAN). But when we run the application on a NFS home directory mount, performance goes to the dogs. It appears that the Linux kernel isn't caching anything. So it is reading every single disk block needed by mmap() accesses over and over and over again. The NFS mount is done through autofs, which has only default settings. /proc/mounts shows the NFS mount is done with the following options: rw,relatime,vers=3,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.11.52,mountvers=3,mountproto=tcp,addr=192.168.11.52 How can I make Ubuntu 10.04 cache the file instead of reloading it all the time?

  Read the article

• Configure New Server for .htaccess

  - by Phil T

  I have a new LAMP CENTOS 5 server I am setting up and trying to copy the configuration from another web server I have. I am stuck with what I think is a mod_rewrite problem. If I go to http://old-server.com/any_page_name.php it correctly routes through some handling code in index.php and shows me a graceful "Page Cannot Be Displayed" message. But if I go to http://new-server.com/any_page_name.php I get an ugly Apache 404 Not Found error message. I looked in both httpd.conf files and they both have only one reference to mod_rewrite. LoadModule rewrite_module modules/mod_rewrite.so So it seems like that should be fine. At the bottom of httpd.conf I have the code: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html ServerName new-server.com ErrorLog logs/new-server.com-error_log CustomLog logs/new-server.com-access_log common </VirtualHost> Then in the root of /var/www/html I have the exact same .htaccess file that looks like this: RewriteEngine on Options +FollowSymlinks RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . index.php [L] ErrorDocument 404 /page-unavailable/ <files ~ "\.tpl$"> order deny,allow allow from none deny from all </files> So I don't see why the page load at old-server.com works fine while new-server.com doesn't route through index.php like I want it to do. Thanks.

  Read the article

• vmware player won't run on CentOS due to missing /dev/vmmon, what could be the problem?

  - by Graphics Noob

  So I've tried installing vmware player 3.1.4 and 3.1.3 and both times had the same problem, when I try to load a VM I get the error "Could not open /dev/vmmon". When I ls /dev/ I can see there is no "vmmon" device present. When I try running: sudo /etc/init.d/vmware start I get the output: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [FAILED] which shows that the Virtual Machine Monitor fails to load. I tried following the advice on this site and ran vmware-modconfig --console --install-all I notice during the compilation there are no errors, but at the end I get the message: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [ OK ] Unable to start services Out of curiousity I tried: sudo /sbin/insmod /lib/modules/2.6.18-238.9.1.el5xen/misc/vmmod.ko But got the error message: insmod: error inserting 'vmmon.ko': -1 Invalid module format I have a feeling this may be the root of the problem, but I don't know what could be causing it or how to fix it.

  Read the article

• How can I make AdobePS recognize my printer in Win98se?

  - by Jeff

  I am trying to use the adobe product: "PostScript Printer Driver AdobePS 4.2.6 for Windows 95 and Windows 98" to connect a new HP laser printer (CP1025nw) via USB to a machine running win98SE. I am using the PPD file for "HP color LaserJet PS". The Adobe utility installs the printer, and it shows up on the printer list ... but it doesn't print. I get an error message (sometimes) that an error occurred writing to USB001.. Evidently, AdobePS cannot "See" the printer. I suspect there is a problem wrt the printer port. Nothing I pick works. I have two virtual printer ports, USB001 and USB002 which were created during the installation of an HP inkjet printer. The inkjet will work on either of these, but the laser printer works on neither. When I connect the laserjet printer, the windows New Hardware Wizard activates, but I don't see how to point it at the AdobePS Postscript driver. HP has no support whatsoever for win98, so there's no hope of getting help from them. The printer works great with the several winXP computers connected through either the network connection or the USB. So, how do I convince Win98se to use the adobe postscript printer driver? Is this printer even a postscript printer? Is there a better way to get win98se to talk to this printer? Any suggestions?

  Read the article

< Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >