Search Results

Search found 26055 results on 1043 pages for 'hd test'.

Page 416/1043 | < Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >

• How to specify console (or primary display) for video adapter?

  - by Igor Zinov'yev

  I have an ASUS ENGT440/DI1GD5 video adapter which has three output ports: D-Sub (HD-15), DVI and HDMI. I am using both the D-Sub and DVI ports, but my main monitor is connected to the DVI output. Everything works fine except for which monitor is designated the console during boot. The video adapter seems to prefer the D-Sub output for the console. When both the VGA and DVI monitors are connected, then the VGA monitor always becomes the console which displays the motherboard logo, POST information and booting progress. When only the DVI monitor is connected, then it becomes the console as desired. How do I make the video adapter always use the DVI output (instead of the VGA port) for the console while booting?

  Read the article

• How do I improve picture quality while streaming live football (soccer) from my Dell D600 to an HDTV?

  - by Bob

  I have fibre broadband with speeds up to 38mbs, my Dell D600 has its max 2gb ram and has an ATI Mobility RADEON 9000 4xAGP 32mb card in it...Its TV support it says is NTSC or PAL in S-video and composite modes with a 7-pin mini-DIN connector (optional S-video to composite video adapter cable) and a vga port which i am using at the moment... The laptop runs Windows XP, an 80g HD with only windows + necessary updates and anti virus software on it..... There is HDMI on the TV, but not the laptop Fairly slow moving and close up pictures arent too bad, but when the movment is fast(a shot on goal) or in the distance, I cant see the ball and the images go out of focus.

  Read the article

• Windows boot iso file without press any key

  - by gln

  I'm trying to make an iso file which will boot without any key-press from the user. In Windows iso files, when booting from a cd, there is a message "press any key to boot from cd" which will wait for 5-10 seconds and then, if there is no key-press, it will boot from HD. I searched the web for how to remove this message, and do not press any key and all the answers were "delete bootfix.bin" from the iso. I edited the iso (I've tried several iso files) to remove the bootfix.bin, but now the iso is not correct. Do you have any suggestions?

  Read the article

• What's the best multiple monitor setup I can buy for $500 and a macbook?

  - by kevinburke

  I've got a 13' white MacBook from 2008 and I'd like to run one or two external monitors, my budget is $500. I've tried to do research and this is what I was going to get - will these work OK? Two Diamond BVU195 HD USB Display Adapters (DVI and VGA with included DVI to VGA adapter) to plug into the USB port Two Dell ST2310 monitors One external USB hub so I don't use up both of my USB ports Will this work? I've read some people say it does and some people say it doesn't, but I don't know enough to say either way. Also do you have recommendations for a better monitor than the dell sd2310? what's the best setup I can buy for $500? Thanks very much for your help, Kevin

  Read the article

• file read performance degrades as number of files increases

  - by bfallik-bamboom

  We're observing poor file read IO results that we'd like to better understand. We can use fio to write 100 files with a sustained aggregate throughput of ~700MB/s. When we switch the test to read instead of write, the aggregate throughput is only ~55MB/s. The drop seems related to the number of files since the throughput for read and write are comparable for a single file then diverge proportionally as we increase the number of files. The test server has 24 CPU cores, 48GB of memory, and is running CentOS 6.0. The disk hardware is a RAID 6 array with 12 disks and a Dell H800 controller. This device is partitioned with ext4 using the default settings. Increasing the readahead (using blockdev) improves the read throughput significantly but it still doesn't match write speed. For instance, increasing the readahead from 128KB to 1M improved the read throughput to ~145MB/s. Is this a known performance issue in our OS/disk/filesystem configuration? If so, how can we tell? If not, what tools or tests can we use to further isolate the issue? Thanks.

  Read the article

• Can DVI look different?

  - by queueoverflow

  I have a desktop with an nVidia GT 9500 which has two DVI slots. I have a 24" TN-Panel TFT on that and it looks pretty good. Then I hooked it onto the DisplayPort of my ThinkPad with the Intel HD 3000 card with an DP-DVI adapter and I think that the fonts look even clearer. Both computers run Kubuntu 12.04, although the ThinkPad is freshly set up, while the desktop is migrated from the previous release. Is this a hardware thing or is it just some setting in the anti-aliasing or sub-pixel-hinting?

  Read the article

• High-End Gaming Desktop PC in France [closed]

  - by Lerikunus

  Hello, I was looking to buy an ALIENWARE AREA 51, as my Desktop crashed some days ago. But the Preliminary Ship date is 03.01.11 and I need the new PC until Friday next week =( Does someone know a(n) (online)-store where Build&Shipping time is quite low so I can get it until next Friday? I am living in France (Nice). Or any place I can ask fot his kind of advice? This is my desired configuration: Overclocked Intel® Core™ i7 980x Extreme Six Core Processor (4.0GHz, 12MB Cache) 12GB Triple Channel 1600MHz DDR3 Dual 2GB ATI Radeon™ HD 6950 2TB RAID 1+0 (4x 1TB SATA-II, 7,200 RPM, 32MB Cache HDDs) 2TB RAID 1 (2x2TB SATA-II, 7,200 RPM, 32MB Cache HDDs) Thank you very much!

  Read the article

• second monitor wont display [closed]

  - by Ryan

  hi all my problem is this: i have one video card (radeon hd 4350) and 2 monitors (dell). the first monitor works using dvi-to-dvi. the second does not, using hdmi-to-dvi. the monitor does not register any input. however when i use vga-to-vga, the second monitor does work, with a typically low vga resolution. we have tested the hdmi-to-dvi cable, so why does the monitor not register any input? using windows vista. i have installed all the lastest drivers, done all the basic stuff etc. any help at all would be appreciated. thanks

  Read the article

• Image an entire computer

  - by DalexL

  I want to start doing a computer repair. I know that some issues may arise (what if I do something wrong and ruin the entire computer?). I'm not saying I'm not confident in my work, but accidents do happen sometimes. Now, the best solution this problem would be to simply just backup their entire computer and restore it if anything goes wrong. If I have an external HD, are there any available methods to create an entire image for the computer so no matter what I do, I can just reload it's last state?

  Read the article

• Strange Behaviour with Unicode Characters in Windows

  - by open_sourse

  Ok, I do not know if this is a programming question, but it certainly is a technical one so I am asking it here. I was working on some internationalization stuff in my PHP code, and in order to ensure that my generated HTML shows up Unicode correctly based on the encoding and stuff I decided to add some Chinese text to my PHP page, which then echoes it into the browser to complete my test case. So I went into google and typed "Chinese", copied the first Chinese text that the search returned (which was ??/??). I then copied it into Notepad++ which is my editor, and to my surprise showed up as boxes similar to [][]/[][]. So I thought the encoding in Notepad++ was messed up and I changed the encoding to UTF-8 and UCS, neither worked. I did it fresh in a newly encoded file, still I got the boxes. The same content when I paste into Google and StackOverFlow (like I did in this posting) shows up correct Chinese! I even opened up Windows Clipboard Viewer and the content is represented in the Clipboard as boxes! I tried pasting it into Windows Explorer address bar and using to rename a file to, but I still get boxes. But it shows up correctly when pasted into my Chrome Browser address bar! Is this a Windows issue? Since I am able to paste it correctly in SO, the data in memory should be encoded correctly right? But if that is the case why does it show up as boxes in the Clipboard Viewer? I am confused here...By the way I am using Windows XP with SP3. (I am asking this question here, even if it is not programmatic, because it is preventing me from running my programming test cases..)

  Read the article

• RAID10 Without BBU, With UPS

  - by Richard

  My datacenter says that each rack has primary and backup power on each rack. I assume this means there is a UPS for each server. Therefore, do I have any need of getting a BBU for the following setup? Intel Cherry 520 SSD x 4 RAID 10 LSI-9260 with WRITEBACK CACHE ENABLED I have heard that without a BBU the data in the cache could be lost. Since my needs aren't mission-critical, I can afford to lose some data. But would the rest of the data on the HD be corrupted?

  Read the article

• Password not accepted when resuming from sleep

  - by Comrade

  My HP Pavilion dv-series notebook will not accept the user account password for the logged in user when resuming from sleep - message returned is Incorrect Password. Simply selecting the Switch User option reloads the login screen and allows me to log in as the same user with the same password that was originally rejected. And, yes I've tried it more than one (hundred) times in case you were thinking it's just a case of slippery fingers. Another interesting point is that it appears to be independent of the software running on the machine. Since the issue first appeared, I have done two clean installs where all HD partitions were wiped and new ones created during fresh installation of the OS. The first such clean install was of Ubuntu (Lucid) 10.04 amd-64, the second of Win 7 Pro 64 (from boxed disc and activated post install). Exactly the same symptoms, described above, are exhibited on both platforms. Have engaged in significant amount of Googling an come up empty so any ideas are welcome.

  Read the article

• Raid-3 like software backup tool

  - by Chronial

  I have a lot of data (about 7 TB), stored across multiple hard-drives with varying sizes. I would like to have a backup of that data to be safe against drive failure. A RAID is not a good option for me, as I want to keep my cost low and be able to easily extend the storage capacity of my setup by buying an additional HD. I remember seeing a piece of software that generates parity data over all drives and stores that on an extra drive. That solution protects the setup from hard drive failure and works with varying drive sizes (as long as the parity drive is the biggest one). But I can’t seem to find that software again. Does anybody now what I’m talking about or have any other solution for my situation?

  Read the article

• XFS: No space left on device

  - by beketa

  I am using XFS on small HDD (/dev/sdb1, less than 1TB) and storing many small files (-32KB). df -h and -i show that it has available space. # df -hv Filesystem Size Used Avail Use% Mounted on /dev/sda3 127G 19G 102G 16% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 168K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/sda1 99M 20M 75M 21% /boot /dev/sdb1 136G 123G 14G 91% /mnt/sdb1 # df -iv Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda3 8421376 36199 8385177 1% / tmpfs 4126158 5 4126153 1% /lib/init/rw udev 4124934 671 4124263 1% /dev tmpfs 4126158 1 4126157 1% /dev/shm /dev/sda1 26112 222 25890 1% /boot /dev/sdb1 24905120 11076608 13828512 45% /mnt/sdb1 However I got No space left on device error. # touch /mnt/sdb1/test touch: cannot touch `/mnt/sdb1/test': No space left on device I think inode64 issue is not related to this case because drive is less than 1TB and df -i shows that there are free inodes. I unmounted and mounted with -o inode64 but got the same error. xfs_repair does not report any problem. xfs_info shows drive information as follows. # xfs_info /dev/sdb1 meta-data=/dev/sdb1 isize=1024 agcount=16, agsize=2227764 blks = sectsz=512 attr=2 data = bsize=4096 blocks=35644210, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 log =internal bsize=4096 blocks=17404, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 Any ideas? Thanks!

  Read the article

• Windows freezes, showing a random color or pattern

  - by Manu

  I have a PC with windows 7, and I'm experiencing random freezes with increasing frequency. After some time (from 30 minutes to a few hours) the screen will shows a random color or pattern (vertical lines) and nothing works anymore, I need to reboot manually. I've checked the events log, but nothing is shown except for the unexpected reboot. I've tested the RAM with Memtest86+ 4.20, and the graphics card with FurMark 1.10.3, no errors have been found. I've updated the graphic drivers and openned the case to remove dust, but the issue is still there. Also, the problem doesn't seem to arise when I'm playing games fullscreen, but when I'm surfing the web, using itunes, or coding. My hardware is as follows : intel core i5 750 CPU, ATI Radeon HD 5670 graphics card, ASUSTeK P7P55D motherboard, two 2Gb KINGSTON DDR3 ram sticks, 2 SATA hard drives, a Netgear dongle for wifi.

  Read the article

• Need help making a bootable portable USB hard drive. [Utility I need will only create bootable CDs or USB flash drives]

  - by Sootah

  I've got a copy of Spotmau's Bootsuite 2012, which is an utterly fantastic tool. It has completely replaced Bart PE for me, and I relied on BPE for YEARS. Anyway, the issue I'm having is that the Bootsuite installer utility will only create bootable USB flash drives, or bootable CDs. The USB hard drive is detected as a hard drive instead of as a USB device, and as such I cannot use the included app to install to the USB HDD. Is there a way of either copying the files from a bootable flash drive to a USB HDD and making that work, or of taking an .ISO of the bootable CD and using that to make the portable HD bootable? The flash drives I've made of it are great as I can always have it with me [have 16GB dangling from my keychain. :) ], but my USB hard drive is FAR faster than any flash drive I have, so I'd like to be able to use that when I'm working out of my office or happen to have it with me.

  Read the article

• Is there a navigation app for iPad which re-calculate the route?

  - by earlyadopter

  iPad 3G successfully shows me current location, but google maps are not re-calculating the route if I did not follow exactly initially suggested by it. Normal auto navigators re-calculate on the fly. CoPilot Live HD app I see in the app store has very bad feedback. Do you know any other that are better, please? I need it with maps for the continental U.S., and being able to re-calculate depending on my real current location. I'd be OK even if it won't do that automatically, — I'd tap some button.

  Read the article

• Upgraded to a GTX 580 - no video signal on boot

  - by MGOwen

  I have: New Corsair 550w PSU (should be more than enough) AsRock H61M u3s3 mobo (with latest updated BIOS) Just replaced my faithful HD 7790 GPU with a refurbished EVGA GTX 580 1.5GB. When I boot, it sounds like the PC boots to windows, and the 580's fan is spinning, but I can't get any video signal from the card. Old card and integrated graphics still work fine (when I replace and use those instead). I am using the DVI ports on the card with a DVI-VGA adapter until I can get my hands on a mini HDMI adapter tomorrow. Anyone ever heard of a GPU needed something special to make the VGA signal work? Hold down a key on startup or something? I can't even find a manual for this card.

  Read the article

• Is there a filesystem that is "friendly" to both windows and Linux?

  - by Somebody still uses you MS-DOS

  I'm planning to install Ubuntu 10.04 with Windows 7. (I'm new to Linux, have to use at work so I'm planning to install it at home to learn more) I plan to use a partition to my Windows system files (C:), a partition for my personal files that already exists (D:) and a new partition for Linux. What I want is to have a partition for my personal files that works across these systems - so, if I start with Windows or Linux, there's the same "Videos", "Pictures", "Projects" folders. Is it possible? Is there a hd filesystem capable of having writes from both systems without too much risk of corrupting or something?

  Read the article

• Is there a filesystem that is "friendly" to both windows and Linux?

  - by Somebody still uses you MS-DOS

  I'm planning to install Ubuntu 10.04 with Windows 7. (I'm new to Linux, have to use at work so I'm planning to install it at home to learn more) I plan to use a partition to my Windows system files (C:), a partition for my personal files that already exists (D:) and a new partition for Linux. What I want is to have a partition for my personal files that works across these systems - so, if I start with Windows or Linux, there's the same "Videos", "Pictures", "Projects" folders. Is it possible? Is there a hd filesystem capable of having writes from both systems without too much risk of corrupting or something? (Can't be FAT32, I need to store 4gb files). I've read some horror stories of corruption, and would like to know from a sysadmin POV all the risks involved in such scenario.

  Read the article

• why can’t I see my Hardrive for my compaq mini 110c from A windows Xp installation on usb stick?

  - by sludog1

  I have a Compaq mini 110c-1100dx and I'm having a terrible time trying to reinstall windows. I dont have a external CD drive and REALLY dont want to pay HP 200bux for one. so, I've been TRYING to reinstall WinXP from a flashdrive and I have it to the point where the XP installation gets past the Agreement, but then the netbooks hard drive is not showing up, it's jus giving me the option to install WInXP onto the flash drive, registering as C:. I've tried using nLite to add extra drivers to the WinXP "cd" but I dont think I have the correct HD drivers and I am stuck. ANY help at all be great

  Read the article

• Windows 7 stopped booting

  - by jstawski

  I have a laptop which after shutdown it stopped booting. I tried repair, safe mode, and even start with Windows 7 Installation. The screen just goes blank with a mouse pointer that I can move around. I removed the harddrive from the laptop and connected it to my desktop using an External HD casing. The computer recognizes the disk, but it seems like it can't read it. If I go to My Computer it shows up, but it doesn't display usage information. When I double click on the drive it sits there as if it was loading something and eventually shows "G:\ is not accessible. The parameter is incorrect." Disk Management and Diskpart also take forever to load and when it does it shows the drive. My question, do you think this is a hardware problem or some corrupted sector? How can I try to fix the drive without formatting it? Thanks...

  Read the article

• Print job leaves queue but document isn't printed

  - by midnightstar

  I'm dealing with an HP Deskjet F380 All-in-One printer. It's connected via USB to a desktop running Windows 7 Enterprise x64. If I attempt to print something like a web page or a word document, the print job will show up in the print queue and the printer would stir. By stir, I mean, it would seem to prepare itself to print. However, the print job would then leave queue (I'm thinking the computer sees it as completed) and the printer would never actually print anything. However I went into Printers and Devices under the Windows start menu, into printer properties, and print a test page, the test page would print out successfully. I attempted to uninstall and re-install the printer drivers for the printer, but the printer would continue the same behavior afterwards. I also connected the printer to another computer and the printer will print just about anything. I also checked to make sure that the computer the printer needs to be connected to was update to date as far as the OS. The machine is fully up to date. I played with the way the computer handles printer spooling. Under the printer properties, under the "Advanced" tab, I had the print job print directly to the printer. In all these instances, the same behavior continues. I've restarted the printer spooling service. I've also gone under C:\Windows\System32\spool\PRINTERS and deleted files that were sitting in the folder. I have ran SFC /scannnow and the system found no errors in the system's integrity. I had the computer and printer make a cold reboot individually. The only lead I really have going for me is that since the printer prints on other PCs, I can only assume that there is something wrong with the way the PC is configured.

  Read the article

• Long running php script hangs/terminates on IIS 7.5

  - by Rich

  I'm a bit of nube when it comes to configuring IIS 7.5 and Php so apologies if this is a silly question but I've been wrestling with this for over half the day and need some fresh input. I have a php application running on IIS 7.5 , php 5.4 running as fastcgi. The application works absolutley fine with the exception that long running php scripts seem to hang; no 500 error they simply seem never complete and return the results to the browser. I've written a simple test script below to eliminate the possibility of programming error in the main app : <?php /* test timeout */ /*set_time_limit(110);*/ echo "Testing time out in seconds\n"; for ($i = 0; $i < 175; $i++) { echo $i." -- "; if(sleep(1)!=0) { echo "sleep failed script terminating"; break; } } ?> If I run the script beyond 175 seconds it hangs. Below that it will return the results to the browser. Here are the time out parameters that I've set for php and fastcgi. I've also played around setting these really low in order to get various time out errors and have succeeded which brings me to the conclusion that there's another setting that I'm missing .. perhaps. fastcgi activity timeout=800 Idle Timeout = 900 request Timeout 800 Php max_execution_time=700 Any solutions or pointers in the right direction would be very ... very welcome. Thanks

  Read the article

• How do I get to the bottom of network latency and bandwidth issues

  - by three_cups_of_java

  I recently moved two blocks south. That move moved me from Comcast to Broadstripe (high-speed internet cable providers). Comcast was pretty good. Broadstripe sucks. I called them on the phone, and they basically brushed me off (politely). I want to come to them with some numbers, so I can say more than just "it's really slow". I still have access to my old Comcast service, so I can run the tests using both providers. Here's what I'm seeing with my new Broadstripe service: 1) When I browse to most sites, there is a long delay (5-10 seconds) before the page starts loading in my browser 2) The speed test tell me I have 12 megs down (bullshit) 3) I have a server at my office. I just downloaded some files (using scp on the command line). It said I'm getting 3.5 KB/s I'm an experienced programmer and spend most of my days on the command line and in vim. Networking, however is not a strong point. I've played around with traceroute, but I'm not sure if that's the right tool to use. I have access to servers all over the country (I would just use Amazon EC2 to set up a test server), and I prefer to use Ubuntu for my testing. How can I come up with some hard numbers to show Broadstripe how crappy their service is?

  Read the article

< Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >