Search Results

Search found 21717 results on 869 pages for 'setup versions'.

Page 417/869 | < Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >

• Certificate Trusts Lists in IIS7

  - by BrettRobi

  I am trying to enable mutual authentication for my WebService hosted in IIS7. I have the server side cert setup and working but cannot figure out how to get a Certificate Trust List created and setup in IIS7 so that I can require and validate client side certificates. All of my client side certs are signed by my own root cert so I need to create a CTL that contains just my root cert and then have IIS validate client provided certs against the CTL. Can anyone shed some light on how to do this? IIS6 had a UI for assigning a CTL, but I can find nothing similar in IIS7. Update: I have now successfully used MakeCTL in wizard mode to create a CTL with a Friendly Name. However I don't have adsutil support on my IIS7 box so via other posts elsewhere I am trying to use the 'netsh http add sslcert' command to assign the CTL to my site. Before I could use this command I had to remove the existing SSL cert that was assigned to my site for server authentication. Then in my netsh command I specify the thumbprint of that very same SSL cert I removed, plus a made up appid, plus 'sslctlidentifier=MyCTL sslctlstorename=CA'. The resulting command is: netsh http add sslcert ipport=10.10.10.10:443 certhash=adfdffa988bb50736b8e58a54c1eac26ed005050 appid={ffc3e181-e14b-4a21-b022-59fc669b09ff} sslctlidentifier=MyCTL sslctlstorename=CA (the IP addr is munged), but I am getting this error: SSL Certificate add failed, Error: 1312 A specified logon session does not exist. It may already have been terminated. I am sure the error is related to the CTL options because if I remove them it works (though no CTL is assigned of course). Can anyone help me take this last step and make this work? UPDATE 01-07-2010: I never resolved this with IIS 7.0 and have since migrated our app to IIS 7.5 and am giving this another try. Per the response from Taras Chuhay I installed IIS6 Compatibility on my test server and tried the steps he documented using adsutil.vbs (which can also be found here). I immediately ran into this error: ErrNumber: -2147023584 Error trying to SET the Property: SslCtlIdentifier when running this command: adsutil.vbs set w3svc/1/SslCtlIdentifier MyFriendlyName I then went on to try the next adsutil.vbs command documented and it failed with the same error. I have verified that the CTL I created has a Friendly Name of MyFriendlyName and that it exists in the 'Intermediate Certification Authorities\Certificate Trust List' store of LocalComputer. So once again I am at a dead standstill. I don't know what else to try. Has anyone ever gotten CTL's to work with IIS7 or 7.5? Ever? Am I beating a DEAD horse. Google turns up nothing but my own posts and other similar stories. Update 2/23/10 - I've confirmed with Microsoft that this is a bug with IIS 7.5, but it does work with IIS 7. Check out this link for details: http://viisual.net/configuration/IIS7-CTLs.htm Update 6/08/10 - I can now confirm that KB981506 resolves this issue. There is a patch associated with this KB that must be applied to Server 2008 R2 machines to enable this functionality. Once that is installed all works flawlessly for me.

  Read the article

• Slow login to load-balanced Terminal Server 2008 behind Gateway Server

  - by Frans

  I have a small load-balanced (using Session Broker) Terminal Server 2008 farm behind a Gateway Server which is accessed from the Internet. The problem I have is that there is a delay of 20-30 seconds if the session broker switches the user to another server during login. I think this is related to the fact that I am forcing the security layer to be RDP rather than SSL. The background The Gateway server has a public routeable IP addres and DNS name so it can be accessed from the Internet and all users come in via this route (the system is used to provide access to hosted applications to external customers). The actual terminal servers only have internal IP addresses. This works really well, except that with a Vista or Windows 7 client, the Remote Desktop client will negotiate with the server to use SSL for the security layer. This then exposes the auto-generated certificate that TS1 or TS2 has - but since they are internal, auto-generated certificates, the client will get a stern warning that the certificate is not valid. I can't give the servers a properly authorised certificate as the servers do not have public routeable IP address or DNS name. Instead, I am using Group Policy to force the connections to be over RDP instead of SSL. \Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Security\Require use of specific security layer for remote (RDP) connections The Windows 7 user now gets a much less stern warning that "the server's identity cannot be confirmed" which I can live with. I don't have enough control over the end-user's machines to ask them to install a new root certificate either. TS1 and TS2 are also load-balanced using the Session Broker, which is installed on the Gateway Server. I am using round-robin DNS, so the user's initial connection will go via Gateway1 to either TS1 or TS2. TS1/TS2 will then talk to the session broker and may pass the user to the other server. I.e. the user may get connected to TS2, but after talking to the session broker the user may be passed to TS1, which is where they will run their session. When this switching of servers happens, in my setup, the screen sits with the word "Welcome" for 20-30 seconds after which it flickers, Welcome is shown again and then flashing through nthe normal login screens (i.e. "wait for user profile manager" etc). Having done some research, I think what is happening is that the user is being fully logged on to TS2 (while "Welcome" is shown) before being passed to TS1, where they are then logged in again. It is interesting that normally when you see the ""Welcome" word, the little circle to left rotates. However, it does not rotate during this delay - the screen just looks frozen. This blog post leads me to think that this is because CredSSP is not being used, probably because I am disallowing SSL and forcing RDP. What I have tried I enabled SSL again which removes the "Welcome" delay. However, it seems to introduc a new delay much earlier in the process. Specifically, when the RDP client is saying "initialising connection" - this is now much slower. Quite apart from the fact that my certificate problem precludes me using that solution without considerable difficulty. I tried disabling the load balancing (just remove the servers from the session broker farm) and the connections do not have any delay. The problem is also intermittent in the sense that it only happens when the user gets bumped from one server to another. I tested this by trying to connect directly to TS1 (via the Gateway, of course) and then checking which server I actually got connected to. Just to be sure, I also by-passed the round-robin DNS to see if it had any impact and it doesn't. The setup is essentially in line with MS recommendations here: TS Session Broker Load Balancing Step-by-Step Guide I tried changing to using a dedicated redirector. Basically, rather than using a round-robin DNS, I pointed my DNS to the Gateway server and configured it to be a dedicated redirector (disallow logons, add it to the farm). Same problem, alas. Any ideas or suggestions gratefully received.

  Read the article

• Error when installing Lync Server, "Installing OcsCore.msi(Feature_LocalMgmtStore)...failure code 1603"

  - by Trikks

  Im battling to install Lync Server in a test environment and are at the "Install Local Configuration Store" step. The prerequisites seems alright but bombs when installing the OcsCore.msi ... Checking prerequisite SqlNativeClient...prerequisite satisfied. Checking prerequisite SqlBackcompat...prerequisite satisfied. Checking prerequisite UcmaRedist...prerequisite satisfied. Installing OcsCore.msi(Feature_LocalMgmtStore)...failure code 1603 Error returned while installing OcsCore.msi(Feature_LocalMgmtStore), code 1603. Please consult log at C:\Users\Administrator.HAWC\AppData\Local\Temp\1\Add-OcsCore.msi-Feature_LocalMgmtStore-[2012_07_08][12_00_27].log The logfile doesn't really help me either, this is the end of it Property(S): Privileged = 1 Property(S): USERNAME = Windows User Property(S): DATABASE = C:\Windows\Installer\9525f.msi Property(S): OriginalDatabase = C:\ProgramData\Microsoft\Lync Server\Deployment\cache\4.0.7577.0\setup\OcsCore.msi Property(S): UILevel = 2 Property(S): Preselected = 1 Property(S): ACTION = INSTALL Property(S): WIX_ACCOUNT_LOCALSYSTEM = NT AUTHORITY\SYSTEM Property(S): WIX_ACCOUNT_LOCALSERVICE = NT AUTHORITY\LOCAL SERVICE Property(S): WIX_ACCOUNT_NETWORKSERVICE = NT AUTHORITY\NETWORK SERVICE Property(S): WIX_ACCOUNT_ADMINISTRATORS = BUILTIN\Administrators Property(S): WIX_ACCOUNT_USERS = BUILTIN\Users Property(S): WIX_ACCOUNT_GUESTS = BUILTIN\Guests Property(S): ROOTDRIVE = C:\ Property(S): CostingComplete = 1 Property(S): OutOfDiskSpace = 0 Property(S): OutOfNoRbDiskSpace = 0 Property(S): PrimaryVolumeSpaceAvailable = 0 Property(S): PrimaryVolumeSpaceRequired = 0 Property(S): PrimaryVolumeSpaceRemaining = 0 Property(S): INSTALLLEVEL = 1 Property(S): SOURCEDIR = C:\ProgramData\Microsoft\Lync Server\Deployment\cache\4.0.7577.0\setup\ Property(S): SourcedirProduct = {9521B708-9D80-46A3-9E58-A74ACF4E343E} === Logging stopped: 2012-07-08 12:01:46 === MSI (s) (98:F8) [12:01:46:354]: Note: 1: 1729 MSI (s) (98:F8) [12:01:46:354]: Product: Microsoft Lync Server 2010, Core Components -- Configuration failed. MSI (s) (98:F8) [12:01:46:354]: Windows Installer reconfigured the product. Product Name: Microsoft Lync Server 2010, Core Components. Product Version: 4.0.7577.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 1603. MSI (s) (98:F8) [12:01:46:356]: Deferring clean up of packages/files, if any exist MSI (s) (98:F8) [12:01:46:356]: MainEngineThread is returning 1603 MSI (s) (98:84) [12:01:46:362]: RESTART MANAGER: Session closed. MSI (s) (98:84) [12:01:46:362]: No System Restore sequence number for this installation. MSI (s) (98:84) [12:01:46:363]: User policy value 'DisableRollback' is 0 MSI (s) (98:84) [12:01:46:363]: Machine policy value 'DisableRollback' is 0 MSI (s) (98:84) [12:01:46:363]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (98:84) [12:01:46:364]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 MSI (s) (98:84) [12:01:46:364]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 MSI (s) (98:84) [12:01:46:364]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (s) (98:84) [12:01:46:364]: Restoring environment variables MSI (s) (98:84) [12:01:46:373]: Destroying RemoteAPI object. MSI (s) (98:D4) [12:01:46:373]: Custom Action Manager thread ending. MSI (c) (20:64) [12:01:46:379]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (20:64) [12:01:46:380]: MainEngineThread is returning 1603 === Verbose logging stopped: 2012-07-08 12:01:46 === Any advice where to start in this? Thanks

  Read the article

• nginx: How can I set proxy_* directives only for matching URIs?

  - by Artem Russakovskii

  I've been at this for hours and I can't figure out a clean solution. Basically, I have an nginx proxy setup, which works really well, but I'd like to handle a few urls more manually. Specifically, there are 2-3 locations for which I'd like to set proxy_ignore_headers to Set-Cookie to force nginx to cache them (nginx doesn't cache responses with Set-Cookie as per http://wiki.nginx.org/HttpProxyModule#proxy_ignore_headers). So for these locations, all I'd like to do is set proxy_ignore_headers Set-Cookie; I've tried everything I could think of outside of setting up and duplicating every config value, but nothing works. I tried: Nesting location directives, hoping the inner location which matches on my files would just set this value and inherit the rest, but that wasn't the case - it seemed to ignore anything set in the outer location, most notably proxy_pass and I end up with a 404). Specifying the proxy_cache_valid directive in an if block that matches on $request_uri, but nginx complains that it's not allowed ("proxy_cache_valid" directive is not allowed here). Specifying a variable equal to "Set-Cookie" in an if block, and then trying to set proxy_cache_valid to that variable later, but nginx isn't allowing variables for this case and throws up. It should be so simple - modifying/appending a single directive for some requests, and yet I haven't been able to make nginx do that. What am I missing here? Is there at least a way to wrap common directives in a reusable block and have multiple location blocks refer to it, after adding their own unique bits? Thank you. Just for reference, the main location / block is included below, together with my failed proxy_ignore_headers directive for a specific URI. location / { # Setup var defaults set $no_cache ""; # If non GET/HEAD, don't cache & mark user as uncacheable for 1 second via cookie if ($request_method !~ ^(GET|HEAD)$) { set $no_cache "1"; } if ($http_user_agent ~* '(iphone|ipod|ipad|aspen|incognito|webmate|android|dream|cupcake|froyo|blackberry|webos|s8000|bada)') { set $mobile_request '1'; set $no_cache "1"; } # feed crawlers, don't want these to get stuck with a cached version, especially if it caches a 302 back to themselves (infinite loop) if ($http_user_agent ~* '(FeedBurner|FeedValidator|MediafedMetrics)') { set $no_cache "1"; } # Drop no cache cookie if need be # (for some reason, add_header fails if included in prior if-block) if ($no_cache = "1") { add_header Set-Cookie "_mcnc=1; Max-Age=17; Path=/"; add_header X-Microcachable "0"; } # Bypass cache if no-cache cookie is set, these are absolutely critical for Wordpress installations that don't use JS comments if ($http_cookie ~* "(_mcnc|comment_author_|wordpress_(?!test_cookie)|wp-postpass_)") { set $no_cache "1"; } if ($request_uri ~* wpsf-(img|js)\.php) { proxy_ignore_headers Set-Cookie; } # Bypass cache if flag is set proxy_no_cache $no_cache; proxy_cache_bypass $no_cache; # under no circumstances should there ever be a retry of a POST request, or any other request for that matter proxy_next_upstream off; proxy_read_timeout 86400s; # Point nginx to the real app/web server proxy_pass http://localhost; # Set cache zone proxy_cache microcache; # Set cache key to include identifying components proxy_cache_key $scheme$host$request_method$request_uri$mobile_request; # Only cache valid HTTP 200 responses for this long proxy_cache_valid 200 15s; #proxy_cache_min_uses 3; # Serve from cache if currently refreshing proxy_cache_use_stale updating timeout; # Send appropriate headers through proxy_set_header Host $host; # no need for this proxy_set_header X-Real-IP $remote_addr; # no need for this proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; # Set files larger than 1M to stream rather than cache proxy_max_temp_file_size 1M; access_log /var/log/nginx/androidpolice-microcache.log custom; }

  Read the article

• Cisco ASA (Client VPN) to LAN - through second VPN to second LAN

  - by user50855

  We have 2 site that is linked by an IPSEC VPN to remote Cisco ASAs: Site 1 1.5Mb T1 Connection Cisco(1) 2841 Site 2 1.5Mb T1 Connection Cisco 2841 In addition: Site 1 has a 2nd WAN 3Mb bonded T1 Connection Cisco 5510 that connects to same LAN as Cisco(1) 2841. Basically, Remote Access (VPN) users connecting through Cisco ASA 5510 needs access to a service at the end of Site 2. This is due to the way the service is sold - Cisco 2841 routers are not under our management and it is setup to allow connection from local LAN VLAN 1 IP address 10.20.0.0/24. My idea is to have all traffic from Remote Users through Cisco ASA destined for Site 2 to go via the VPN between Site 1 and Site 2. The end result being all traffic that hits Site 2 has come via Site 1. I'm struggling to find a great deal of information on how this is setup. So, firstly, can anyone confirm that what I'm trying to achieve is possible? Secondly, can anyone help me to correct the configuration bellow or point me in the direction of an example of such a configuration? Many Thanks. interface Ethernet0/0 nameif outside security-level 0 ip address 7.7.7.19 255.255.255.240 interface Ethernet0/1 nameif inside security-level 100 ip address 10.20.0.249 255.255.255.0 object-group network group-inside-vpnclient description All inside networks accessible to vpn clients network-object 10.20.0.0 255.255.255.0 network-object 10.20.1.0 255.255.255.0 object-group network group-adp-network description ADP IP Address or network accessible to vpn clients network-object 207.207.207.173 255.255.255.255 access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit icmp any any source-quench access-list outside_access_in extended permit icmp any any unreachable access-list outside_access_in extended permit icmp any any time-exceeded access-list outside_access_in extended permit tcp any host 7.7.7.20 eq smtp access-list outside_access_in extended permit tcp any host 7.7.7.20 eq https access-list outside_access_in extended permit tcp any host 7.7.7.20 eq pop3 access-list outside_access_in extended permit tcp any host 7.7.7.20 eq www access-list outside_access_in extended permit tcp any host 7.7.7.21 eq www access-list outside_access_in extended permit tcp any host 7.7.7.21 eq https access-list outside_access_in extended permit tcp any host 7.7.7.21 eq 5721 access-list acl-vpnclient extended permit ip object-group group-inside-vpnclient any access-list acl-vpnclient extended permit ip object-group group-inside-vpnclient object-group group-adp-network access-list acl-vpnclient extended permit ip object-group group-adp-network object-group group-inside-vpnclient access-list PinesFLVPNTunnel_splitTunnelAcl standard permit 10.20.0.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 10.20.0.0 255.255.255.0 10.20.1.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 10.20.0.0 255.255.255.0 host 207.207.207.173 access-list inside_nat0_outbound_1 extended permit ip 10.20.1.0 255.255.255.0 host 207.207.207.173 ip local pool VPNPool 10.20.1.100-10.20.1.200 mask 255.255.255.0 route outside 0.0.0.0 0.0.0.0 7.7.7.17 1 route inside 207.207.207.173 255.255.255.255 10.20.0.3 1 crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 20 set security-association lifetime seconds 288000 crypto dynamic-map outside_dyn_map 20 set security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set reverse-route crypto map outside_map 20 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto map outside_dyn_map 20 match address acl-vpnclient crypto map outside_dyn_map 20 set security-association lifetime seconds 28800 crypto map outside_dyn_map 20 set security-association lifetime kilobytes 4608000 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 20 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 group-policy YeahRightflVPNTunnel internal group-policy YeahRightflVPNTunnel attributes wins-server value 10.20.0.9 dns-server value 10.20.0.9 vpn-tunnel-protocol IPSec password-storage disable pfs disable split-tunnel-policy tunnelspecified split-tunnel-network-list value acl-vpnclient default-domain value YeahRight.com group-policy YeahRightFLVPNTunnel internal group-policy YeahRightFLVPNTunnel attributes wins-server value 10.20.0.9 dns-server value 10.20.0.9 10.20.0.7 vpn-tunnel-protocol IPSec split-tunnel-policy tunnelspecified split-tunnel-network-list value YeahRightFLVPNTunnel_splitTunnelAcl default-domain value yeahright.com tunnel-group YeahRightFLVPN type remote-access tunnel-group YeahRightFLVPN general-attributes address-pool VPNPool tunnel-group YeahRightFLVPNTunnel type remote-access tunnel-group YeahRightFLVPNTunnel general-attributes address-pool VPNPool authentication-server-group WinRadius default-group-policy YeahRightFLVPNTunnel tunnel-group YeahRightFLVPNTunnel ipsec-attributes pre-shared-key *

  Read the article

• Why can't I build Deluge?

  - by hugemeow

  Deluge is a BitTorrent Client. I am trying to build it from source, since I don't have privilege to install it as root. I am using python setup.py build. But, it failed following message, why? copying deluge/ui/web/themes/images/gray/slider/slider-v-thumb.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/gray/slider copying deluge/ui/web/themes/images/gray/slider/slider-thumb.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/gray/slider copying deluge/ui/web/themes/images/gray/panel/top-bottom.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/gray/panel copying deluge/ui/web/themes/images/gray/tabs/tab-strip-bg.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/gray/tabs copying deluge/ui/web/themes/images/yourtheme/window/right-corners.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/window copying deluge/ui/web/themes/images/yourtheme/window/left-corners.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/window copying deluge/ui/web/themes/images/yourtheme/window/left-right.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/window copying deluge/ui/web/themes/images/yourtheme/window/top-bottom.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/window creating build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/slider copying deluge/ui/web/themes/images/yourtheme/slider/slider-v-thumb.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/slider copying deluge/ui/web/themes/images/yourtheme/slider/slider-thumb.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/slider copying deluge/ui/web/themes/images/yourtheme/slider/slider-bg.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/slider copying deluge/ui/web/themes/images/yourtheme/slider/slider-v-bg.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/slider copying deluge/ui/web/themes/images/yourtheme/panel/top-bottom.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/panel copying deluge/ui/web/themes/images/yourtheme/grid/hmenu-lock.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/grid copying deluge/ui/web/themes/images/yourtheme/grid/hmenu-unlock.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/grid copying deluge/ui/web/themes/images/yourtheme/tabs/tab-strip-bg.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/tabs running build_ext building 'libtorrent' extension gcc -pthread -shared -L/usr/lib64 -L/opt/local/lib -lboost_filesystem -lboost_date_time -lboost_iostreams -lboost_python -lboost_thread -lpthread -lssl -lz -o build/lib.linux-x86_64-2.4/deluge/libtorrent.so /usr/bin/ld: cannot find -lboost_filesystem collect2: ld returned 1 exit status error: command 'gcc' failed with exit status 1 [mirror@innov deluge-1.3.5]$ echo $? 1 Edit 1: gcc version and os information $(which gcc) --version gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. cat /etc/issue CentOS release 5.7 (Final) Kernel \r on an \m Edit 2: boost is referenced by setup.py in deluge 114 if OS == "linux": 115 if os.path.exists(os.path.join(sysconfig.get_config_vars()['LIBDIR'], \ 116 'libboost_filesystem-mt.so')): 117 boost_filesystem = "boost_filesystem-mt" 118 elif os.path.exists(os.path.join(sysconfig.get_config_vars()['LIBDIR'], \ 119 'libboost_filesystem.so')): 120 boost_filesystem = "boost_filesystem" 121 if os.path.exists(os.path.join(sysconfig.get_config_vars()['LIBDIR'], \ 122 'libboost_date_time-mt.so')): 123 boost_date_time = "boost_date_time-mt" 124 elif os.path.exists(os.path.join(sysconfig.get_config_vars()['LIBDIR'], \ 125 'libboost_date_time.so')): 126 boost_date_time = "boost_date_time" 127 if os.path.exists(os.path.join(sysconfig.get_config_vars()['LIBDIR'], \ 128 'libboost_thread-mt.so')): 129 boost_thread = "boost_thread-mt" 130 elif os.path.exists(os.path.join(sysconfig.get_config_vars()['LIBDIR'], \ 131 'libboost_thread.so')): 132 boost_thread = "boost_thread" 133 134 if 'boost_filesystem' not in vars(): 135 boost_filesystem = "boost_filesystem-mt" 136 if 'boost_date_time' not in vars(): 137 boost_date_time = "boost_date_time-mt" 138 if 'boost_thread' not in vars(): 139 boost_thread = "boost_thread-mt" 140 141 elif OS == "freebsd": 142 boost_filesystem = "boost_filesystem" 143 boost_date_time = "boost_date_time" 144 boost_thread = "boost_thread" 145 else: 146 boost_filesystem = "boost_filesystem-mt" 147 boost_date_time = "boost_date_time-mt" 148 boost_thread = "boost_thread-mt" 149 150 librariestype = [boost_filesystem, boost_date_time, 151 boost_thread, 'z', 'pthread', 'ssl', 'crypto']

  Read the article

• stunnel crashing

  - by Jay

  I'm trying to use stunnel to secure a legacy application's communications. I can't seem to get it setup and working. Can anyone provide any hints where I'm going wrong? Here's what I'm trying to accomplish: A windows service on a client machine connects to a server on port 7000 using TCP. I'd like to encrypt the communication between client and server. Here's what I've tried: Created a new server that accepts ssl connections on port 7443. Got a certificate for the server and installed it. That seems to work with my test setup. Installed stunnel on my windows machine (version 7.43 from the distribution archive file). Installed libssl32.dll and libeay32.dll in the same directory as stunnel.exe ( from the openssl-0.9.8h-1 binary distribution). Installed it as a service using "stunnel -install" Configured stunnel as follows: debug=7 output=C:\p4\internal\Utility\Proxy\proxy.log service=Proxy taskbar=no [exchange] accept=7000 client=yes connect=proxy.blah.com:7443 I changed my hosts file to trick the old application into connecting through stunnel: server.blah.com 127.0.0.1 # when client looks up server it goes to stunnel proxy.blah.com IP-address-of-server.blah.com # stunnel connects to new server "server.blah.com" now resolves to the machine it's running on (i.e. stunnel). "proxy.blah.com" goes to the real server. stunnel should connect to the server. I start the stunnel service and try to connect. It looks like it's working but the stunnel service just shuts down with no message. 2010.04.19 13:16:21 LOG5[4924:3716]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:16:21 LOG5[4924:3716]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange accepted connection from 127.0.0.1:4134 2010.04.19 13:16:49 LOG6[4924:3748]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange connected remote server from x.253.120.19:4135 2010.04.19 13:20:24 LOG5[3668:3856]: Reading configuration from file stunnel.conf 2010.04.19 13:20:24 LOG7[3668:3856]: Snagged 64 random bytes from C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: Wrote 1024 new random bytes to C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: RAND_status claims sufficient entropy for the PRNG 2010.04.19 13:20:24 LOG7[3668:3856]: PRNG seeded successfully 2010.04.19 13:20:24 LOG7[3668:3856]: SSL context initialized for service exchange 2010.04.19 13:20:24 LOG5[3668:3856]: Configuration successful 2010.04.19 13:20:24 LOG5[3668:3856]: No limit detected for the number of clients 2010.04.19 13:20:24 LOG7[3668:3856]: FD=312 in non-blocking mode 2010.04.19 13:20:24 LOG7[3668:3856]: Option SO_REUSEADDR set on accept socket 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange bound to 0.0.0.0:7000 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange opened FD=312 2010.04.19 13:20:24 LOG5[3668:3856]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:20:24 LOG5[3668:3856]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:21:02 LOG7[3668:4556]: Service exchange accepted FD=372 from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:4556]: Creating a new thread 2010.04.19 13:21:02 LOG7[3668:4556]: New thread created 2010.04.19 13:21:02 LOG7[3668:3756]: Service exchange started 2010.04.19 13:21:02 LOG7[3668:3756]: FD=372 in non-blocking mode 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange accepted connection from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:3756]: FD=396 in non-blocking mode 2010.04.19 13:21:02 LOG6[3668:3756]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:21:02 LOG7[3668:3756]: connect_blocking: s_poll_wait x.80.60.32:7443: waiting 10 seconds 2010.04.19 13:21:02 LOG5[3668:3756]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange connected remote server from x.253.120.19:4157 2010.04.19 13:21:02 LOG7[3668:3756]: Remote FD=396 initialized 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): before/connect initialization 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server certificate A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server done A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client key exchange A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write change cipher spec A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write finished A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 flush data 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read finished A The client thinks the connection is closed: No connection could be made because the target machine actively refused it 127.0.0.1:7000 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.Connect(EndPoint remoteEP) at Service.ConnUtility.Connect() Any suggestions?

  Read the article

• Setting up apache to view https pages

  - by zac

  I am trying to set up a site using vmware workstation, ubuntu 11.10, and apache2. The site works fine but now the https pages are not showing up. For example if I try to go to https://www.mysite.com/checkout I just see the message Not Found The requested URL /checkout/ was not found on this server. I dont really know what I am doing and have tried a lot of things to get the ssl certificates in there right. A few things I have in there, in my httpd.conf I just have : ServerName localhost In my ports.conf I have : NameVirtualHost *:80 Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 http </IfModule> <IfModule mod_gnutls.c> Listen 443 http </IfModule> In the /etc/apache2/sites-available/default-ssl : <IfModule mod_ssl.c> <VirtualHost _default_:443> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> .... truncated in the sites-available/default I have : <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www #DocumentRoot /home/magento/site/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> #<Directory /home/magento/site/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> <virtualhost *:443> SSLEngine on SSLCertificateFile /etc/apache2/ssl/server.crt SSLCertificateKeyFile /etc/apache2/ssl/server.key ServerAdmin webmaster@localhost <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> #<Directory /home/magento/site/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> </virtualhost> I also have in sites-availabe a file setup for my site url, www.mysite.com so in /etc/apache2/sites-available/mysite.com <VirtualHost *:80> ServerName mysite.com DocumentRoot /home/magento/mysite.com <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /home/magento/mysite.com/ > Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog /home/magento/logs/apache.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn </VirtualHost> <VirtualHost *:443> ServerName mysite.com DocumentRoot /home/magento/mysite.com <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /home/magento/mysite.com/ > Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog /home/magento/logs/apache.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn </VirtualHost> Thanks for any help getting this setup! As is probably obvious from this post I am pretty lost at this point.

  Read the article

• Apache outputs all urls of a second domain as a subfolder of the primary domain name

  - by s_rathbone

  Hi all, would anyone be able to possibly give me some guidance.. Basically, i have a 'shared hosting' account with a large internet hosting provider, and my account lets me have multiple seperate domains within this folder structure.(note: not aliased domains and not sub domains). so, my goal is to have 2 domains set up. i have already purchased the two domain names i need: The first domain is the 'primary' domain name for the root folder(eg. www.example1.com) and the second domain name is set for one of its sub folders(eg. www.example2.com is set to the folder www.example1.com/sites/music). The problem is that when apache returns a page of the second domain back to the browser, apache writes the hyperlinks as if it's a sub folder of the first domain ( eg. www.example2.com/index.html. comes out as http://www.example1.com/sites/music/index.html). Now, I have done some reading on this, looking though "Apache: the definitive guide"(o'reilly), and although it was useful, couldn't really find the answer. i'm guessing this issue is most likely an apache setup issue in http.conf, rather than an issue with the hosting company itself (which is why im posting it here) and I have also been to the official documentation for apache site, and i am guessing i might need to use something like the rewritebase directive in htaccess files.. but im really not sure, im more of a java programmer guy, and have been struggling with this for a couple of days. Any guidance would be REALLY appreciated. If it helps, my hosting company is godaddy, and my sites are hosted on linux. My problem was originally with wordpress which i reinstalled a number of times in various ways to correct the problem, but ive just done a test with a very simple static html, and it still has the same issue with relative urls like this: <html> <head></head><body><a href="images/dog.html">Pictures of Dogs</a></body> </html> However, it is fine if i hardcode the urls like this: <html> <head></head><body><a href="http://www.example2.com/images/dog.html">Pictures of Dogs</a></body> </html> Thanks heaps, Steve R NOW FIXED Ok, the problem has now been fixed, and i didn't need to modify any .conf or .htaccess files. The problem was, that when I went to install the second application into a second domain from the godaddy site, one of the setup questions is that it asks you which site you want it installed to. after that it asks for the desired folder path. However, the problem was that the second domain name was already pointing to the correct subfolder of the primary domain. So when I started installing wordpress again and came to the menu to select which site it was for, and it listed only the primary domain as an option, i assumed that this was like a label of "which hosting account?", or "which primary domain will your application will be installed under?" because I already knew that in the next step i was specifiying the folder. In order to correct this, you must make sure that your second domain is added to your domain list so that it will be listed as an option during the installation process. For further details please read tystips.com/archives/52/how2-save-money-host-multiple-wordpress-blogs-on-a-single-godaddy-hosting-account/

  Read the article

• xen debian: domU can't get out side

  - by iftol

  hi every body. i'm a trainee as a sysAdmin, it is my first expérience with virtualization. i have a server setup debian xen 3 with 2 physical interfaces. eth 0 for local network 10.0.0.1 and eth1 for internet (194.X.X.4). i created 3 VMs (web server, mail server and dabase server) with local ip addresses 172.10.0.x/24. the problem i had first is that domU can't ping dom0. i asked the sysAdmin of our ISP and he sais that he fogot to setup the bridginb. so he ceated a bridge with 172.10.0.1/24 after that i was able to ping the real server (194.X.X.4). but i can't go out side from my VMs, how can i fixe this issue? real or physical server ifconfig eth0 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe inet adr:10.1.3.12 Bcast:10.1.3.255 Masque:255.255.255.0 adr inet6: fe80::226:b9ff:fe84:ceb4/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:412006 errors:0 dropped:0 overruns:0 frame:0 TX packets:411296 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:31410957 (29.9 MiB) TX bytes:31178370 (29.7 MiB) Interruption:36 Mémoire:d6000000-d6012100 eth1 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe inet adr:194.x.x.4 Bcast:194.254.167.255 Masque:255.255.255.0 adr inet6: fe80::226:b9ff:fe84:ceb6/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:25872332 errors:0 dropped:0 overruns:0 frame:0 TX packets:414578 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:2642278343 (2.4 GiB) TX bytes:35436775 (33.7 MiB) lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1308073 errors:0 dropped:0 overruns:0 frame:0 TX packets:1308073 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:109871395 (104.7 MiB) TX bytes:109871395 (104.7 MiB) peth1 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:31818694 errors:0 dropped:0 overruns:0 frame:0 TX packets:414818 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:5197318822 (4.8 GiB) TX bytes:37904897 (36.1 MiB) Interruption:48 Mémoire:d8000000-d8012100 vif281.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:207 errors:0 dropped:0 overruns:0 frame:0 TX packets:298 errors:0 dropped:2 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:24629 (24.0 KiB) TX bytes:28404 (27.7 KiB) vif281.1 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:45 errors:0 dropped:47063 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:0 (0.0 B) TX bytes:4449 (4.3 KiB) vif282.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:78 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:5041 (4.9 KiB) TX bytes:714 (714.0 B) xenbr0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet adr:172.10.0.1 Bcast:172.10.0.255 Masque:255.255.255.0 adr inet6: fe80::5c72:c6ff:fe49:7fe/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7180 errors:0 dropped:0 overruns:0 frame:0 TX packets:8615 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:756804 (739.0 KiB) TX bytes:791206 (772.6 KiB) brtcl show bridge name bridge id STP enabled interfaces eth1 8000.0026b984ceb6 no peth1 vif281.1 xenbr0 8000.feffffffffff no vif281.0 vif282.0 network-multi-bridge /etc/xen/scripts/network-virtual start vifnum="0" bridgeip="172.10.0.1/24" brnet="172.10.0.0/24" VM webserver eth0 Link encap:Ethernet HWaddr 00:16:3E:42:33:70 inet addr:172.10.0.2 Bcast:172.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe42:3370/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:27 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:126 (126.0 b) TX bytes:2036 (1.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Thank you for your help.

  Read the article

• SQL Server Issue: Could not allocate space for object ... primary filegroup is full

  - by Luke

  Trying to figure out a problem at an office that has SQL Server 2005 installed on Windows SBS Server 2008. Here's the setup: It's an office, and the person who set this all up is nowhere to be found. I'm the best hope they have... One of the programs they use on a workstation gives them an error of "Could not allocate space for object 'Billing' in database "MyDatabase" because primary filegroup is full" when trying to save an entry in their software. I searched around for hours, looking for possible solutions. One was to check for available disk space, and another was to defrag. I checked the hard drives on the server, and there is plenty of space free. I also defragged, which may have helped the problem somewhat. It's hard to say, because it seems like with the nature of the error, if you try over and over you might get it to actually save. My next step was to try to see if autogrowth was enabled on the database. This would seem to be a likely / possible solution, but I can't access the database! If I run the SQL Management Studio, I can log in as my Windows user and view the list of databases. However, if I try to do anything (actually view the database, view the properties, add or edit users), I get errors that I don't have permission. For what it's worth, I also tried runing Management Studio as Administrator, in case that would help. No difference, though. Now, what I'm guessing is going on -- from my limited knowledge of SQL and from reading online -- is that though I'm logged in as a Windows administrator, that account does NOT have SQL access. I do see a list of SQL users, including SA, but I again don't have permission to add one or to change the password on an existing one. And nobody at the office has any idea what the SQL passwords could be. So... here's my thinking thus far: 1 - The "Could not allocate" error likely points to a database that needs to be allowed to autogrow. Especially since I verified there is plenty of free space and the HD has been defragmented. 2 - Enabling autogrow would be very easy to do if I had the proper access within SQL Management Stuido. That leads me to this link: http://blogs.technet.com/b/sqlman/archive/2011/06/14/tips-amp-tricks-you-have-lost-access-to-sql-server-now-what.aspx It sounds like it's a step-by-step guide for giving me the access I need to SQL. I'm guessing that if I followed this guide, I would be able to then log in to the SQL server via Management Studio with the proper permissions, and would be able to enable autogrow (or simply view the status of the existing database), and hopefully solve the "Could not allocate space" problem! So I guess I have a few questions: 1 - Would you guys agree with my "diagnosis"? Think I'm barking up the right tree? 2 - Is there any risk at all in hurting / disabling / wrecking the current SQL database or setup with me going through the guide to regain SQL access? I understand that per the guide, I would have to temporarily shut down SQL, so obviously it wouldn't be accessible during that time. But it wouldn't be worth the risk if there's a chance I could mess anything up... Like I said, the workstations ARE currently accessing the database somehow, but nobody knows with what login info or anything. Basically, it's set up, it works (usually), but if they had to reload the software, nobody would know how. Any feedback would be appreciated!! The problem is such that it's not an emergency for them, but an annoyance. If I could fix it, it would be wonderful. But if not, I think they'll manage, especially as they are going to eventually stop using this software. Thank you so much for your time! Luke

  Read the article

• proftpd, dynamic IP, and filezilla: port troubles

  - by Yami

  The basic setup: Two computers, one running proftpd, one attempting to connect via filezilla. Both linux (xubuntu on the server, kubuntu on the client). Both are at the moment behind a router on a residential (read: dynamic IP) connection; the client is a laptop I plan to take away from the home network, so I'll need this to work externally. I have my router set up to allow specific ports forwarded to each machine and, where possible, have plugged in those numbers into proftpd (via gadmin, double-checking the config file) and filezilla. Attempting to connect via active mode using the internal IP works: Status: Connecting to 192.168.1.139:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 192,168,1,52,153,140 Response: 200 PORT command successful Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Status: Directory listing successful Attempting to connect via the domain name, however, leads to issues; in active mode, the PORT is the last command to be received according to the server's logs, and in passive mode, it's the PASV command. This leads me to believe I'm being redirected to a bad port? Active Sample: Status: Resolving address of <url> Status: Connecting to <ip:port> Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 174,111,127,27,153,139 Response: 200 PORT command successful Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing Passive sample: Status: Resolving address of ftp.bonsaiwebdesigns.com Status: Connecting to 174.111.127.27:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER yamikuronue Response: 331 Password required for yamikuronue Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (64,95,64,197,101,88). Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing In both cases, the log file ends at "PORT" or "PASV" - there's no record of ever receiving a "LIST" command. Just above that I can see the attempt to connect actively via the internal IP, which does indeed include a LIST command. My config file includes "PassivePorts 20001-26999", which are the port forwards I set up for the ftp server, and "Port 8085", which is also forwarded to the same machine. I also have a MasqueradeAddress set up to prevent it from reporting its internal IP, which was an earlier issue I had. I think what I'm asking is, is there another setting someplace I have to change to get this setup to work?

  Read the article

• Replicate between mysql 5.0.xx community and enterprise edition over ssh

  - by Arlukin

  I'm trying to setup a mysql replication over an SSH tunnel. The odd thing about this setup is that I have one master with mysql 5.0.60sp1-enterprise-gpl-log and one slave with mysql 5.0.67-community-log. Could it be so that it's not possible to replicate between community and enterprise edition? As you can see in my log below, it's possible to login on the remote server with the mysql client. But the replication get "Can't connect to MySQL server on '127.0.0.1' (13)" Is it any log file I have forgotten to look in, to get more info? [root@mysql1-av ~]# mysql -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 73 Server version: 5.0.67-community-log MySQL Community Edition (GPL) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. The version of the slave mysql [root@mysql1-av ~]# autossh -f -M 20001 -L 3307:10.200.200.200:3306 [email protected] -N [root@mysql1-av ~]# mysql -h127.0.0.1 --port 3307 -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 5189 Server version: 5.0.60sp1-enterprise-gpl-log MySQL Enterprise Server (GPL) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> Aborted Login to the master mysql with the mysql client over the ssh tunnel. [root@mysql1-av ~]# mysql -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 75 Server version: 5.0.67-community-log MySQL Community Edition (GPL) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> change master to master_host='127.0.0.1', MASTER_PORT=3307, master_user='xxxx', master_password='xxxx', master_log_file='bin.000001'; Query OK, 0 rows affected (0.00 sec) mysql> start slave; Query OK, 0 rows affected (0.00 sec) mysql> show slave status \G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: 127.0.0.1 Master_User: replNSG Master_Port: 3307 Connect_Retry: 60 Master_Log_File: bin.000001 Read_Master_Log_Pos: 4 Relay_Log_File: relay.000001 Relay_Log_Pos: 98 Relay_Master_Log_File: bin.000001 Slave_IO_Running: No Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 4 Relay_Log_Space: 98 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL 1 row in set (0.00 sec) Start the replication, but it breaks on IO. [root@mysql1-av ~]# tail /var/log/mysqld.log 120921 22:17:59 [Note] Slave I/O thread killed while connecting to master 120921 22:17:59 [Note] Slave I/O thread exiting, read up to log 'bin.000001', position 4 120921 22:17:59 [Note] Error reading relay log event: slave SQL thread was killed 120921 22:29:36 [Note] Slave SQL thread initialized, starting replication in log 'bin.000001' at position 4, relay log '/var/lib/mysql/relay.000001' position: 4 120921 22:29:36 [ERROR] Slave I/O thread: error connecting to master '[email protected]:3307': Error: 'Can't connect to MySQL server on '127.0.0.1' (13)' errno: 2003 retry-time: 60 retries: 86400 Because it can't connect to the master server.

  Read the article

• set proxy in apache for XMPP chat

  - by Hunt

  I want to setup a proxy settings in Apache to use Facebook XMPP Chat So far I have setup ejabber server and I am able to access xmpp service using http://mydomain.com:5280/xmpp-http-bind I am able to create Jabber Account too. Now as I want to integrate Facebook XMPP chat , I want my server to sit in between client and chat.facebook.com because I want to implement Facebook chat and custom chat too. So I have read this article and come to know that I need to serve BOSH Service as a proxy in apache to access Facebook Chat service. So I don't know how to set up a proxy in a apache httpd.conf as I have tried following <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind ProxyPassReverse /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind But whenever I request http://www.mydomain.com:5280/xmpp-http-bind from strophe.js I am getting following response from server <body type='terminate' condition='internal-server-error' xmlns='http://jabber.org/protocol/httpbind'> BOSH module not started </body> and server log says following E(<0.567.0:ejabberd_http_bind:1239) : You are trying to use BOSH (HTTP Bind) in host "chat.facebook.com", but the module mod_http_bind is not started in that host. Configure your BOSH client to connect to the correct host, or add your desired host to the configuration, or check your 'modules' section in your ejabberd configuration file. here is my existing settings of ejabberd.cfg , but still no luck {5280, ejabberd_http, [ {access,all}, {request_handlers, [ {["pub", "archive"], mod_http_fileserver}, {["xmpp-http-bind"], mod_http_bind} ]}, captcha, http_bind, http_poll, register, web_admin ]} ]}. in a module section {mod_http_bind, [{max_inactivity, 120}]}, and whenever i fire http://www.mydomain.com:5280/xmpp-http-bind url independently am getting following message ejabberd mod_http_bind An implementation of XMPP over BOSH (XEP-0206) This web page is only informative. To use HTTP-Bind you need a Jabber/XMPP client that supports it. I have added chat.facebook.com in a list of host in ejabber.cfg as follows {hosts, ["localhost","mydomain.com","chat.facebook.com"]} and now i am getting following response <body xmlns='http://jabber.org/protocol/httpbind' sid='710da2568460512eeb546545a65980c2704d9a27' wait='300' requests='2' inactivity='120' maxpause='120' polling='2' ver='1.8' from='chat.facebook.com' secure='true' authid='1917430584' xmlns:xmpp='urn:xmpp:xbosh' xmlns:stream='http://etherx.jabber.org/streams' xmpp:version='1.0'> <stream:features xmlns:stream='http://etherx.jabber.org/streams'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>DIGEST-MD5</mechanism> <mechanism>PLAIN</mechanism> </mechanisms> <c xmlns='http://jabber.org/protocol/caps' hash='sha-1' node='http://www.process-one.net/en/ejabberd/' ver='yy7di5kE0syuCXOQTXNBTclpNTo='/> <register xmlns='http://jabber.org/features/iq-register'/> </stream:features> </body> if i use valid BOSH service created my jack moffit http://bosh.metajack.im:5280/xmpp-httpbind then i am getting following valid XML from facebook , but from my server i am not getting this <body xmlns='http://jabber.org/protocol/httpbind' inactivity='60' secure='true' authid='B8732AA1' content='text/xml; charset=utf-8' window='3' polling='15' sid='928073b02da55d34eb3c3464b4a40a37' requests='2' wait='300'> <stream:features xmlns:stream='http://etherx.jabber.org/streams' xmlns='jabber:client'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>X-FACEBOOK-PLATFORM</mechanism> <mechanism>DIGEST-MD5</mechanism> </mechanisms> </stream:features> </body> Can anyone please help me to resolve the issue

  Read the article

• Weird Network Behavior of Home Router

  - by Stilgar

  First of all I would like to apologize because what you are going to read will be long and confusing but I am fighting this issue for 3 days now and am out of ideas. At home I have the following setup 50Mbps Internet connects into a home router A 2 desktop computers connect to router A via standard FTP LAN cables including one where the cable is ~20m long. a second router B connects to router A via standard FTP LAN cable X (~20m long). several devices connect to the wireless network of router B and there are a couple of desktop computers connected to it through FTP LAN cables. For some reason computers connected to router B when it is connected via cable X have very slow Internet connection. It is like 5 times slower than what is expected. This is the actual problem I am trying to solve. Interesting facts If a computer is connected to cable X directly instead of through router B the Internet speed is just fine (up to the 50Mbps I get from the ISP). Tested with two computers. I have tried replacing router B with another router C and the problem persists. If I connect router B via another cable to the same ports with the same settings everything seems to work fine and computers connected to router B have quite fast Internet I have tested mainly via Speedtest.net but I have also achieved similar speeds when downloading a file The upload speed is quite higher than the download speed in all cases. Note that my ISP usually has higher upload speed (unless it manages to hit the 50Mbps cap) It seems like the speed when connecting through router B with cable X is reduced 4-5 times no matter what the original speed is. For example via router B I get 10Mbps speed to local servers where I get 50Mbps when connected on router A. If I use a distant server where the ISP is only able to provide 25Mbps I get 4-5Mbps on router B. WiFi is slower than LAN on both routers (which is normal) but the reduced speed is reduced proportionally for WiFi. In addition the upload speed is normally higher from the ISP and it is also reduced proportionally. I have tried two different network configurations. One where I have NAT behind NAT where router B connects to router A via the WAN port and has its own DHCP. Second where router B connects to router A via standard LAN port and has DHCP disabled. In this configuration router B serves as a switch and the Network Gateway for computers connected to router B is the internal IP address of router A. Both configurations work just fine but both manifest the reduced speed issue. pings seem to work just fine As far as I can tell none of the cables is crossed The RJ45 setup for cable X orange orange-white brown brow-white blue blue-white green green-white This is a big problem for me since cable X passes through walls and floors and is very hard to replace. I also may have gotten some of the facts wrong because I am almost going crazy with this issue and testing includes going several floors up and down the staircase. One hypothesis I came up with is that the cable is defective in such a way that the voltage from the router affects its performance. When it is connected to a computer it performs just fine but the router has less power. Related hypothesis includes the cable being affected by electricity cables in the walls when the voltage is low. (I know nothing about electricity) So any ideas what to do, what to test or what the issue may be?

  Read the article

• Consistent PHP _SERVER variables between Apache and nginx?

  - by Alix Axel

  I'm not sure if this should be asked here or on ServerFault, but here it goes... I am trying to get started on nginx with PHP-FPM, but I noticed that the server block setup I currently have (gathered from several guides including the nginx Pitfalls wiki page) produces $_SERVER variables that are different from what I'm used to seeing in Apache setups. After spending the last evening trying to "fix" this, I decided to install Apache on my local computer and gather the variables that I'm interested in under different conditions so that I could try and mimic them on nginx. The Apache setup I've on my computer has only one mod_rewrite rule: RewriteEngine On RewriteCond %{SCRIPT_FILENAME} !-f RewriteCond %{SCRIPT_FILENAME} !-d RewriteRule ^(.*)$ /index.php/$1 [L] And these are the values I get for different request URIs (left is Apache, right is nginx): localhost/ - http://www.mergely.com/GnzBHRV1/ localhost/foo/bar/baz/?foo=bar - http://www.mergely.com/VwsT8oTf/ localhost/index.php/foo/bar/baz/?foo=bar - http://www.mergely.com/VGEFehfT/ What configuration directives would allow me to get similar values on requests handled by nginx? My current configuration in nginx is: server { listen 80; listen 443 ssl; server_name default; ssl_certificate /etc/nginx/certificates/dummy.crt; ssl_certificate_key /etc/nginx/certificates/dummy.key; root /var/www/default/html; index index.php index.html; autoindex on; location / { try_files $uri $uri/ /index.php; } location ~ /(?:favicon[.]ico|robots[.]txt)$ { log_not_found off; } location ~* [.]php { #try_files $uri =404; include fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_split_path_info ^(.+[.]php)(/.+)$; } location ~* [.]ht { deny all; } } And my fastcgi_params file looks like this: fastcgi_param PATH_INFO $fastcgi_path_info; fastcgi_param PATH_TRANSLATED $document_root$fastcgi_path_info; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param HTTPS $https; I know that the try_files $uri =404; directive is commented and that it is a security vulnerability but, if I uncomment it, the third request (localhost/index.php/foo/bar/baz/?foo=bar) will return a 404. It's also worth noting that my PHP cgi.fix_pathinfo in On (contrary to what some of the guides recommend), if I try to set it to Off, I'm presented with a "Access denied." message on every PHP request. I'm running PHP 5.4.8 and nginx/1.1.19. I don't know what else to try... Help?

  Read the article

• Mac OS X 10.8 VPN Server: Bypass VPN for LAN traffic (routing LAN traffic to secondary connection)

  - by Dan Robson

  I have somewhat of an odd setup for a VPN server with OS X Mountain Lion. It's essentially being used as a bridge to bypass my company's firewall to our extranet connection - certain things our team needs to do require unfettered access to the outside, and changing IT policies to allow traffic through the main firewall is just not an option. The extranet connection is provided through a Wireless-N router (let's call it Wi-Fi X). My Mac Mini server is configured with the connection to this router as the primary connection, thus unfettered access to the internet via the router. Connections to this device on the immediate subnet are possible through the LAN port, but outside the subnet things are less reliable. I was able to configure the VPN server to provide IP addresses to clients in the 192.168.11.150-192.168.11.200 range using both PPTP and L2TP, and I'm able to connect to the extranet through the VPN using the standard Mac OS X VPN client in System Preferences, however unsurprisingly, a local address (let's call it internal.company.com) returns nothing. I tried to bypass the limitation of the VPN Server by setting up Routes in the VPN settings. Our company uses 13.x.x.x for all internal traffic, instead of 10.x.x.x, so the routing table looked something like this: IP Address ---------- Subnet Mask ---------- Configuration 0.0.0.0 248.0.0.0 Private 8.0.0.0 252.0.0.0 Private 12.0.0.0 255.0.0.0 Private 13.0.0.0 255.0.0.0 Public 14.0.0.0 254.0.0.0 Private 16.0.0.0 240.0.0.0 Private 32.0.0.0 224.0.0.0 Private 64.0.0.0 192.0.0.0 Private 128.0.0.0 128.0.0.0 Private I was under the impression that if nothing was entered here, all traffic was routed through the VPN. With something entered, only traffic specifically marked to go through the VPN would go through the VPN, and all other traffic would be up to the client to access using its own default connection. This is why I had to specifically mark every subnet except 13.x.x.x as Private. My suspicion is that since I can't reach the VPN server from outside the local subnet, it's not making a connection to the main DNS server and thus can't be reached on the larger network. I'm thinking that entering hostnames like internal.company.com aren't kicked back to the client to resolve, because the server has no idea that the IP address falls in the public range, since I suspect (probably should ping test it but don't have access to it right now) that it can't reach the DNS server to find out anything about that hostname. It seems to me that all my options for resolving this all boil down to the same type of solution: Figure out how to reach the DNS with the secondary connection on the server. I'm thinking that if I'm able to do [something] to get my server to recognize that it should also check my local gateway (let's say Server IP == 13.100.100.50 and Gateway IP == 13.100.100.1). From there Gateway IP can tell me to go find DNS Server at 13.1.1.1 and give me information about my internal network. I'm very confused about this path -- really not sure if I'm even making sense. I thought about trying to do this client side, but that doesn't make sense either, since that would add time to each and every client side setup. Plus, it just seems more logical to solve it on the server - I could either get rid of my routing table altogether or keep it - I think the only difference would be that internal traffic would also go through the server - probably an unnecessary burden on it. Any help out there? Or am I in over my head? Forward proxy or transparent proxy is also an option for me, although I have no idea how to set either of those up. (I know, Google is my friend.)

  Read the article

• Openldap/Sasl/GSSAPI on Debian: Key table entry not found

  - by badbishop

  The goal: to make an OpenLDAP server to authenticate using Kerberos V via GSSAPI Setup: several virtual machines running on freshly installed/updated Debian Squeeze A master KDC server kdc.example.com A LDAP server, running OpenLDAP ldap.example.com The problem: tom@ldap:~$ ldapsearch -b 'dc=example,dc=com' SASL/GSSAPI authentication started ldap_sasl_interactive_bind_s: Other (e.g., implementation specific) error (80) additional info: SASL(-1): generic failure: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information (Key table entry not found) One might suggest to add that bloody keytab entry, but here's the real problem: ktutil: rkt /etc/ldap/ldap.keytab ktutil: list slot KVNO Principal ---- ---- --------------------------------------------------------------------- 1 2 ldap/[email protected] 2 2 ldap/[email protected] 3 2 ldap/[email protected] 4 2 ldap/[email protected] So, the entry as suggested by the OpenLDAP manual is there allright. Deleting and re-creating both service principal and the keytab on ldap.example.com didn't help, I get the same error. And before I make the keytab file readable by openldap, I get "Permission denied" error instead of the one in the subject. Which implies, that the right keytab file is being accessed, as set in /etc/default/slapd. I have my doubts about the following part of slapd config: root@ldap:~# cat /etc/ldap/slapd.d/cn\=config.ldif | grep -v "^#" dn: cn=config objectClass: olcGlobal cn: config olcArgsFile: /var/run/slapd/slapd.args olcLogLevel: 256 olcPidFile: /var/run/slapd/slapd.pid olcToolThreads: 1 structuralObjectClass: olcGlobal entryUUID: d6737f5c-d321-1030-9dbe-27d2a7751e11 olcSaslHost: kdc.example.com olcSaslRealm: EXAMPLE.COM olcSaslSecProps: noplain,noactive,noanonymous,minssf=56 olcAuthzRegexp: {0}"uid=([^/]*),cn=EXAMPLE.COM,cn=GSSAPI,cn=auth" "uid=$1,ou=People,dc=example,dc=com" olcAuthzRegexp: {1}"uid=host/([^/]*).example.com,cn=example.com,cn=gssapi,cn=auth" "cn=$1,ou=hosts,dc=example,dc=com" A HOWTO at https://help.ubuntu.com/community/OpenLDAPServer#Kerberos_Authentication mentiones vaguely: Also, it is frequently necessary to map the Distinguished Name (DN) of an authorized Kerberos client to an existing entry in the DIT. I fail to understand where in the tree this should be defined, what schema should be used, etc. After hours of googling, it's official: I'm stuck! Please, help. Other things checked: Kerberos as such works fine (I can ssh without using a password to any machine in this setup). That means there should be no DNS-related problems. ldapsearch -b 'dc=example,dc=com' -x works OK. SASL/GSSAPI has been tested using sasl-sample-server -m GSSAPI -s ldap and sasl-sample-client -s ldap -n ldap.example.com -u tom without errors: root@ldap:~# sasl-sample-server -m GSSAPI -s ldap Forcing use of mechanism GSSAPI Sending list of 1 mechanism(s) S: R1NTQVBJ Waiting for client mechanism... C: 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 'GSSAPI' Sending response... S: YIGZBgkqhkiG9xIBAgICAG+BiTCBhqADAgEFoQMCAQ+iejB4oAMCARKicQRvkxggi9pW+yJ1ExbTwLDclqw/VQ98aPq8mt39hkO6PPfcO2cB+t6vJ01xRKBrT9D2qF2XK0SWD4PQNb5UFbH4RM/bKAxDuCfZ1MHKgIWTLu4bK7VGZTbYydcckU2d910jIdvkkHhaRqUEM4cqp/cR Waiting for client reply... C: got '' Sending response... S: BQQF/wAMAAAAAAAAMBOWqQcACAAlCodrXW66ZObsEd4= Waiting for client reply... C: BQQE/wAMAAAAAAAAFUYbXQQACAB0b20VynB4uGH/iIzoRhw=got '?' Negotiation complete Username: tom Realm: (NULL) SSF: 56 sending encrypted message 'srv message 1' S: AAAASgUEB/8AAAAAAAAAADATlqrqrBW0NRfPMXMdMz+zqY32YakrHqFps3o/vO6yDeyPSaSqprrhI+t7owk7iOsbrZ/idJRxCBm8Wazx Waiting for encrypted message... C: AAAATQUEBv8AAAAAAAAAABVGG17WC1+/kIV9xTMUdq6Y4qYmmTahHVCjidgGchTOOOrBLEwA9IqiTCdRFPVbK1EgJ34P/vxMQpV1v4WZpcztgot '' recieved decoded message 'client message 1' root@ldap:~# sasl-sample-client -s ldap -n ldap.example.com -u tom service=ldap Waiting for mechanism list from server... S: R1NTQVBJrecieved 6 byte message Choosing best mechanism from: GSSAPI returning OK: tom Using mechanism GSSAPI Preparing initial. Sending initial response... C: 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 Waiting for server reply... S: YIGZBgkqhkiG9xIBAgICAG+BiTCBhqADAgEFoQMCAQ+iejB4oAMCARKicQRvkxggi9pW+yJ1ExbTwLDclqw/VQ98aPq8mt39hkO6PPfcO2cB+t6vJ01xRKBrT9D2qF2XK0SWD4PQNb5UFbH4RM/bKAxDuCfZ1MHKgIWTLu4bK7VGZTbYydcckU2d910jIdvkkHhaRqUEM4cqp/cRrecieved 156 byte message C: Waiting for server reply... S: BQQF/wAMAAAAAAAAMBOWqQcACAAlCodrXW66ZObsEd4=recieved 32 byte message Sending response... C: BQQE/wAMAAAAAAAAFUYbXQQACAB0b20VynB4uGH/iIzoRhw= Negotiation complete Username: tom SSF: 56 Waiting for encoded message... S: AAAASgUEB/8AAAAAAAAAADATlqrqrBW0NRfPMXMdMz+zqY32YakrHqFps3o/vO6yDeyPSaSqprrhI+t7owk7iOsbrZ/idJRxCBm8Wazxrecieved 78 byte message recieved decoded message 'srv message 1' sending encrypted message 'client message 1' C: AAAATQUEBv8AAAAAAAAAABVGG17WC1+/kIV9xTMUdq6Y4qYmmTahHVCjidgGchTOOOrBLEwA9IqiTCdRFPVbK1EgJ34P/vxMQpV1v4WZpczt

  Read the article

• How to access remote lan machines through a ipsec / xl2ptd vpn (maybe iptables related)

  - by Simon

  I’m trying to do the setup of a IPSEC / XL2TPD VPN for our office, and I’m having some problems accessing the remote local machines after connecting to the VPN. I can connect, and I can browse Internet sites trough the VPN, but as said, I’m unable to connect or even ping the local ones. My Network setup is something like this: INTERNET eth0 ROUTER / VPN eth2 LAN These are some traceroutes behind the VPN: traceroute to google.com (173.194.78.94), 64 hops max, 52 byte packets 1 192.168.1.80 (192.168.1.80) 74.738 ms 71.476 ms 70.123 ms 2 10.35.192.1 (10.35.192.1) 77.832 ms 77.578 ms 77.865 ms 3 10.47.243.137 (10.47.243.137) 78.837 ms 85.409 ms 76.032 ms 4 10.47.242.129 (10.47.242.129) 78.069 ms 80.054 ms 77.778 ms 5 10.254.4.2 (10.254.4.2) 86.174 ms 10.254.4.6 (10.254.4.6) 85.687 ms 10.254.4.2 (10.254.4.2) 85.664 ms traceroute to 192.168.1.3 (192.168.1.3), 64 hops max, 52 byte packets 1 * * * 2 *traceroute: sendto: No route to host traceroute: wrote 192.168.1.3 52 chars, ret=-1 *traceroute: sendto: Host is down traceroute: wrote 192.168.1.3 52 chars, ret=-1 * traceroute: sendto: Host is down 3 traceroute: wrote 192.168.1.3 52 chars, ret=-1 *traceroute: sendto: Host is down traceroute: wrote 192.168.1.3 52 chars, ret=-1 These are my iptables rules: iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT # allow lan to router traffic iptables -A INPUT -s 192.168.1.0/24 -i eth2 -j ACCEPT # ssh iptables -A INPUT -p tcp --dport ssh -j ACCEPT # vpn iptables -A INPUT -p 50 -j ACCEPT iptables -A INPUT -p ah -j ACCEPT iptables -A INPUT -p udp --dport 500 -j ACCEPT iptables -A INPUT -p udp --dport 4500 -j ACCEPT iptables -A INPUT -p udp --dport 1701 -j ACCEPT # dns iptables -A INPUT -s 192.168.1.0/24 -p tcp --dport 53 -j ACCEPT iptables -A INPUT -s 192.168.1.0/24 -p udp --dport 53 -j ACCEPT iptables -t nat -A POSTROUTING -j MASQUERADE # logging iptables -I INPUT 5 -m limit --limit 1/min -j LOG --log-prefix "iptables denied: " --log-level 7 # block all other traffic iptables -A INPUT -j DROP And here are some firewall log lines: Dec 6 11:11:57 router kernel: [8725820.003323] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=192.168.1.3 LEN=60 TOS=0x00 PREC=0x00 TTL=255 ID=62174 PROTO=UDP SPT=61910 DPT=53 LEN=40 Dec 6 11:12:29 router kernel: [8725852.035826] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=15344 PROTO=UDP SPT=56329 DPT=8612 LEN=24 Dec 6 11:12:36 router kernel: [8725859.121606] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=11767 PROTO=UDP SPT=63962 DPT=8612 LEN=24 Dec 6 11:12:44 router kernel: [8725866.203656] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=11679 PROTO=UDP SPT=57101 DPT=8612 LEN=24 Dec 6 11:12:51 router kernel: [8725873.285979] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=39165 PROTO=UDP SPT=62625 DPT=8612 LEN=24 I’m pretty sure that the problem should be related with iptables, but after trying a lot of different confs, I was unable to find the right one. Any help will be greetly appreciated ;). Kind regards, Simon. EDIT: This is my route table: default 62.43.193.33.st 0.0.0.0 UG 100 0 0 eth0 62.43.193.32 * 255.255.255.224 U 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth2 192.168.1.81 * 255.255.255.255 UH 0 0 0 ppp0

  Read the article

• Auth-Type :- Reject in RADIUS users file matches inner tunnel request but sends Access-Accept

  - by mgorven

  I have WPA2 802.11x EAP authentication setup using FreeRADIUS 2.1.8 on Ubuntu 10.04.4 talking to OpenLDAP, and can successfully authenticate using PEAP/MSCHAPv2, TTLS/MSCHAPv2 and TTLS/PAP (both via the AP and using eapol_test). I am now trying to restrict access to specific SSIDs based on the LDAP groups which the user belongs to. I have configured group membership checking in /etc/freeradius/modules/ldap like so: groupname_attribute = cn groupmembership_filter = "(|(&(objectClass=posixGroup)(memberUid=%{User-Name}))(&(objectClass=posixGroup)(uniquemember=%{User-Name})))" and I have configured extraction of the SSID from Called-Station-Id into Called-Station-SSID based on the Mac Auth wiki page. In /etc/freeradius/eap.conf I have enabled copying attributes from the outer tunnel into the inner tunnel, and usage of the inner tunnel response in the outer tunnel (for both PEAP and TTLS). I had the same behaviour before changing these options however. copy_request_to_tunnel = yes use_tunneled_reply = yes I'm running eapol_test like this to test the setup: eapol_test -c peap-mschapv2.conf -a 172.16.0.16 -s testing123 -N 30:s:01-23-45-67-89-01:Example-EAP with the following peap-mschapv2.conf file: network={ ssid="Example-EAP" key_mgmt=WPA-EAP eap=PEAP identity="mgorven" anonymous_identity="anonymous" password="foobar" phase2="autheap=MSCHAPV2" } With the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" and running freeradius-Xx, I can see that the LDAP group retrieval works, and that the SSID is extracted. Debug: [ldap] performing search in dc=example,dc=com, with filter (&(cn=employees)(|(&(objectClass=posixGroup)(memberUid=mgorven))(&(objectClass=posixGroup)(uniquemember=mgorven)))) Debug: rlm_ldap::ldap_groupcmp: User found in group employees ... Info: expand: %{7} -> Example-EAP Next I try to only allow access to users in the employees group (regardless of SSID), so I put the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" DEFAULT Auth-Type := Reject But this immediately rejects the Access-Request in the outer tunnel because the anonymous user is not in the employees group. So I modify it to only match inner tunnel requests like so: DEFAULT Ldap-Group == "employees" DEFAULT FreeRADIUS-Proxied-To == "127.0.0.1" Auth-Type := Reject, Reply-Message = "User does not belong to any groups which may access this SSID." Now users which are in the employees group are authenticated, but so are users which are not in the employees group. I see the reject entry being matched, and the Reply-Message is set, but the client receives an Access-Accept. Debug: rlm_ldap::ldap_groupcmp: Group employees not found or user is not a member. Info: [files] users: Matched entry DEFAULT at line 209 Info: ++[files] returns ok ... Auth: Login OK: [mgorven] (from client test port 0 cli 02-00-00-00-00-01 via TLS tunnel) Info: WARNING: Empty section. Using default return values. ... Info: [peap] Got tunneled reply code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Got tunneled reply RADIUS code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Tunneled authentication was successful. Info: [peap] SUCCESS Info: [peap] Saving tunneled attributes for later ... Sending Access-Accept of id 11 to 172.16.2.44 port 60746 Reply-Message = "User does not belong to any groups which may access this SSID." User-Name = "mgorven" and eapol_test reports: RADIUS message: code=2 (Access-Accept) identifier=11 length=233 Attribute 18 (Reply-Message) length=64 Value: 'User does not belong to any groups which may access this SSID.' Attribute 1 (User-Name) length=9 Value: 'mgorven' ... SUCCESS Why isn't the request being rejected, and is this the right way to implement this?

  Read the article

• Mod_Rewrite Apache ProxyPass ?

  - by Anon

  I have two websites; OLDSITE and NEWSITE. The OLDSITE has 120 IP Address that it has with it, and the NEWSITE had 5. I want to be able to separate everything from OLDSITE and NEWSITE so they are not tied together but use them on the same linux computer. My current apache setup is this: Listen 80 NameVirtualHost * <VirtualHost *> ServerName oldsite.com ServerAdmin [email protected] DocumentRoot /var/www/ <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> RewriteEngine on RewriteCond %{HTTP_HOST} ^([^.]+)\.oldsite\.com$ RewriteCond /home/%1/ -d RewriteRule ^(.+) %{HTTP_HOST}$1 RewriteRule ^([^.]+)\.oldsite\.com/media/(.*) /home/$1/dir/media/$2 RewriteRule ^([^.]+)\.oldsite\.com/(.*) /home/$1/www/$2 </VirtualHost> <VirtualHost newsite.com> ServerName newsite.com ServerAdmin [email protected] DocumentRoot /var/newsite/ <Directory /var/newsite/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> RewriteEngine on RewriteCond %{HTTP_HOST} ^([^.]+)\.newsite\.com$ RewriteCond /home/%1/ -d RewriteRule ^(.+) %{HTTP_HOST}$1 RewriteRule ^([^.]+)\.newsite\.com/media/(.*) /home/$1/dir/media/$2 RewriteRule ^([^.]+)\.newsite\.com/(.*) /home/$1/www/$2 </VirtualHost> <VirtualHost *> ServerName panel.oldsite.com ProxyPass / http://panel.oldsite.com:10000/ ProxyPassReverse / http://panel.oldsite.com:10000/ <Proxy *> allow from all </Proxy> </VirtualHost> <VirtualHost *> ServerName panel.newsite.com ProxyPass / http://panel.newsite.com:10000/ ProxyPassReverse / http://panel.newsite.com:10000/ <Proxy *> allow from all </Proxy> </VirtualHost> I want to be able to access anything that is newsite.com and have it go to the /var/newsite unless their is a home directory...and then if its panel.newsite.com I want it to automatically do a proxypass to panel.newsite.com:10000... With this setup, it works perfect for oldsite.com.... both the proxy and the webpages... However, having the Virtualhost set to newsite.com renders the proxypass worthless. If I change the Virtualhost for the newsite.com to a wildcard, the proxypass will work but anything thats a subdomain of newsite.com won't work. so newsite.com will work, but www.newsite.com will not load correctly. I am assuming that when everything is wildcarded, then the ServerName somewhat acts like a RewriteCond and actually just applies the stuff to that URL. It uses the Virtualhost * (oldsite.com) and lets ANYTHING.oldsite.com work, but the second virtualhost * (newsite.com) only newsite.com will work... www.newsite.com will not. If I change the order of them, the opposite is true. So apparently it doesn't like me using 2 wildcards... I tried just making the Servername *.newsite.com .......but that would be too easy. I am not sure what I can do to do what I want? Perhaps I should make the ProxyPass included in the VirtualHosts and use something like: RewriteCond %{HTTP_HOST} ^panel\.newsite\.com$ [NC] RewriteRule ^(.*)$ http://panel.newsite.com:10000/ [P] ProxyPassReverse / http://panel.newsite.com:10000/ but that doesnt seem to want to login to webmin, it loads the login page but isnt working how the ProxyPass & ProxyPassReverse does.

  Read the article

• How to recover data files from xampp-windows to xampp-linux after crash?

  - by David Buehler

  My Windows box died after I developed a database in xampp on it; fortunately I have a backup of the entire F:/TestWeb/Xampp partition. Unfortunately, I did not do an Export (nor dump) of the "Lws2" database before the crash. I have replaced the defunct machine with one running Mint7 (based on Ubuntu 9.04 "Jaunty Jackalope") and installed xampp-linux into the /opt partition, so the new xampp now runs fine in /opt/lampp, and says all the elements are secured by passwords (which I just assigned during this installation.) I assumed that Xamp-Windows installed in November would migrate easily to xampp-linux installed iin February -- a bad assumption. It apparently would have been simple if I had known enough to do an Export or a Dump before the crash, but.... The backup was done to a Network Attached Storage drive, which is formatted as "vfat" so the backup does not carry with it any valid ownership permissions from MySql on NTFS. I now see from my backup that the old data resided in \TestWeb\Xampp\Mysql\Data\Lws2\ and consists of 7 ".frm" files which define my tables. The actual data -- I suppose a ".sql" file or files -- has disappeared, and I am resigning myself to two days of retyping it. But I do not wish to do the table layouts all over again. So I copied Data tree to /opt/lampp/Data -- PhpMyAdmin does not see it. So I copied Lws2 tree to /opt/lampp/Lws2 -- PhpMyAdmin does not see it. So I copied Data tree to /opt/lampp/var/mysql/Data -- PhpMyAdmin does not see it. So I copied Lws2 tree to /opt/lampp/var/mysql/Lws2 -- PhpMyAdmin does not see it. So I adjusted all the permissions to stop saying owner "nobody" to owner "root" and gave full permissions to all groups and to all others, with permissions percolating down, in all 4 trees. You guessed it -- PhpMyAdmin does not see any database named Lws2, only its 4 default ones. I double-checked the permissions and rebooted Linux and repeated the tests. At some point in that process I did see PhpMyAdmin showing "lws2(7)" but when I clicked on it I saw a "no table found" message. I have not been able to recreate that experience. Apparently there are some setup files for MySql and for PhpMyAdmin which need to be set up by running a wizard or two or by editing the files directly. I grepped the TestWeb tree and found an old "ldir = "C:TestWeb\Xampp\MySql\" and a "DataDir = C:TestWeb\Xampp\MySql\" in a .php file and in a .bat file, but I cannot find the corresponding config file names on the /opt partition/ -- so it looks as if these wizards have not been run to create them. What config files files does Linux use to setup MySql config files for PhpMyAdmin? What wizards do I need to run to point the MySql engine and the PhpMyAdmin at the folder /opt/lampp/data/ with its lws2 folder inside it? Or which files do I need to edit, with a sample of what it normally says under Linux? Incidentally, I remember I converted from MyISAM with its .MYD and .MYI files to InnoDB after entering only a small amount of the data -- and I do not know what file types to look for -- perhaps my data is still there but under another guise or in another place? Is it something as simple as linux needing to see "/data/" instead of /Data? I will check that out while waiting for a response. If anyone can point me to documentation that discusses this level of detail -- I will read it avidly! In any case, thanks for any clarification you can give on this thorny problem. wizdum

  Read the article

• simple and reliable centralized logging inside Amazon VPC

  - by Nakedible

  I need to set up centralized logging for a set of servers (10-20) in an Amazon VPC. The logging should be as to not lose any log messages in case any single server goes offline - or in the case that an entire availability zone goes offline. It should also tolerate packet loss and other normal network conditions without losing or duplicating messages. It should store the messages durably, at the minimum on two different EBS volumes in two availability zones, but S3 is a good place as well. It should also be realtime so that the messages arrive within seconds of their generation to two different availability zones. I also need to sync logfiles not generated via syslog, so a syslog-only centralized logging solution would not fulfill all the needs, although I guess that limitation could be worked around. I have already reviewed a few solutions, and I will list them here: Flume to Flume to S3: I could set up two logservers as Flume hosts which would store log messages either locally or in S3, and configure all the servers with Flume to send all messages to both servers, using the end-to-end reliability options. That way the loss of a single server shouldn't cause lost messages and all messages would arrive in two availability zones in realtime. However, there would need to be some way to join the logs of the two servers, deduplicating all the messages delivered to both. This could be done by adding a unique id on the sending side to each message and then write some manual deduplication runs on the logfiles. I haven't found an easy solution to the duplication problem. Logstash to Logstash to ElasticSearch: I could install Logstash on the servers and have them deliver to a central server via AMQP, with the durability options turned on. However, for this to work I would need to use some of the clustering capable AMQP implementations, or fan out the deliver just as in the Flume case. AMQP seems to be a yet another moving part with several implementations and no real guidance on what works best this sort of setup. And I'm not entirely convinced that I could get actual end-to-end durability from logstash to elasticsearch, assuming crashing servers in between. The fan-out solutions run in to the deduplication problem again. The best solution that would seem to handle all the cases, would be Beetle, which seems to provide high availability and deduplication via a redis store. However, I haven't seen any guidance on how to set this up with Logstash and Redis is one more moving part again for something that shouldn't be terribly difficult. Logstash to ElasticSearch: I could run Logstash on all the servers, have all the filtering and processing rules in the servers themselves and just have them log directly to a removet ElasticSearch server. I think this should bring me reliable logging and I can use the ElasticSearch clustering features to share the database transparently. However, I am not sure if the setup actually survives Logstash restarts and intermittent network problems without duplicating messages in a failover case or similar. But this approach sounds pretty promising. rsync: I could just rsync all the relevant log files to two different servers. The reliability aspect should be perfect here, as the files should be identical to the source files after a sync is done. However, doing an rsync several times per second doesn't sound fun. Also, I need the logs to be untamperable after they have been sent, so the rsyncs would need to be in append-only mode. And log rotations mess things up unless I'm careful. rsyslog with RELP: I could set up rsyslog to send messages to two remote hosts via RELP and have a local queue to store the messages. There is the deduplication problem again, and RELP itself might also duplicate some messages. However, this would only handle the things that log via syslog. None of these solutions seem terribly good, and they have many unknowns still, so I am asking for more information here from people who have set up centralized reliable logging as to what are the best tools to achieve that goal.

  Read the article

• How to redirect http requests to https (nginx)

  - by spuder

  There appear to be many questions and guides out there that instruct how to setup nginx to redirect http requests to https. Many are outdated, or just flat out wrong. # MANAGED BY PUPPET upstream gitlab { server unix:/home/git/gitlab/tmp/sockets/gitlab.socket; } # setup server with or without https depending on gitlab::gitlab_ssl variable server { listen *:80; server_name gitlab.localdomain; server_tokens off; root /nowhere; rewrite ^ https://$server_name$request_uri permanent; } server { listen *:443 ssl default_server; server_name gitlab.localdomain; server_tokens off; root /home/git/gitlab/public; ssl on; ssl_certificate /etc/ssl/certs/ssl-cert-snakeoil.pem; ssl_certificate_key /etc/ssl/private/ssl-cert-snakeoil.key; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers AES:HIGH:!ADH:!MDF; ssl_prefer_server_ciphers on; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback, see below try_files $uri $uri/index.html $uri.html @gitlab; } # if a file, which is not found in the root folder is requested, # then the proxy pass the request to the upsteam (gitlab puma) location @gitlab { proxy_read_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_connect_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_redirect off; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header X-Forwarded-Ssl on; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_pass http://gitlab; } } I've restarted after every configuration change, and yet I still only get the 'Welcome to nginx' page when visiting http://192.168.33.10. whereas https://192.168.33.10 works perfectly. Why will nginx still not redirect http requests to https? I've also tried the following configurations listen *:80; server_name <%= @fqdn %>; #root /nowhere; #rewrite ^ https://$server_name$request_uri? permanent; #rewrite ^ https://$server_name$request_uri permanent; #return 301 https://$server_name$request_uri; #return 301 http://$server_name$request_uri; #return 301 http://192.168.33.10$request_uri; return 301 http://$host$request_uri; The logs tailf /var/log/nginx/access.log 192.168.33.1 - - [22/Oct/2013:03:41:39 +0000] "GET / HTTP/1.1" 304 0 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Firefox/24.0" 192.168.33.1 - - [22/Oct/2013:03:44:43 +0000] "GET / HTTP/1.1" 200 133 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Firefox/24.0" tailf /var/log/nginx/gitlab_error.lob 2013/10/22 02:29:14 [crit] 27226#0: *1 connect() to unix:/home/git/gitlab/tmp/sockets/gitlab.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.33.1, server: gitlab.localdomain, request: "GET / HTTP/1.1", upstream: "http://unix:/home/git/gitlab/tmp/sockets/gitlab.socket:/", host: "192.168.33.10" Resources http://wiki.nginx.org/Pitfalls How to make nginx redirect How to force or redirect to SSL in nginx? nginx ssl redirect Nginx & Https Redirection https://www.tinywp.in/301-redirect-wordpress/ How to force or redirect to SSL in nginx?

  Read the article

• Windows 7 / Ubuntu Dualboot GRUB Problem.

  - by Tek

  I'd like to first say ahead of time that I'm running a RAID-0 Setup. 1.First of all, I'm glad Ubuntu 9.10 installed flawlessly and detected my RAID-0 setup just fine. The issue I'm having now is that I already had Windows 7 installed and made a small 12GB partition for Linux/Swap. I grabbed EasyBCD 2.0 to edit the W7 bootloader and configured it to use dual boot Grub2 because before it didn't even show the option for Ubuntu. The bootloader points to a file made in the windows directory made by EasyBCD called "C:\NST\AutoNeoGrub0.mbr" which is what I'm guessing grub is booting from. After that I got the option for booting Ubuntu. The problem is that it's sending me to the Grub prompt (probably because it's pointing to \NST|AutoNeoGrub0.mbr?), at first I didn't know what to do but I researched and have to type grub commands to manually boot into Ubuntu Linux. Ex: grubroot (hd0,4) grubkernel /boot/vmlinuz-2.6... root=/dev/disk/by-uuid/24624-2424... grubinitrd boot/initrd.img-2.6... grubboot After all that Ubuntu boots just fine, but how do I fix it permanently? Do I need to edit the bootloader manually (since Easy BCD "autoconfigures")? Some insight on this would rock! Also, it sucks to type the actual uuid since it's REALLY long. I tried getting the name of the drive via fdisk -l but since it's raid 0 I'm guessing I can't do that. How can I get a shorter name of the drive? like /dev/sda, /dev/sdb etc? I've also tried to update to the latest GRUB and I got this: Creating config file /etc/default/grub with new version Generating core.img error: cannot seek /dev/sdc' error: cannot seek/dev/sdc' grub-probe: error: no mapping exists for nvidia_dbedfcca5' Auto-detection of a filesystem module failed. Please specify the module with the option--modules' explicitly. dpkg: error processing grub-pc (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of grub2: grub2 depends on grub-pc; however: Package grub-pc is not configured yet. dpkg: error processing grub2 (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. E: Sub-process /usr/bin/dpkg returned an error code (1) I've also tried: b@dnb:~$ sudo update-grub error: cannot seek /dev/sdc' error: cannot seek/dev/sdc' Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.31-14-generic Found initrd image: /boot/initrd.img-2.6.31-14-generic error: cannot seek /dev/sdc' grub-probe: error: no mapping exists fornvidia_dbedfcca5' error: cannot seek /dev/sdc' grub-probe: error: no mapping exists fornvidia_dbedfcca5' Found memtest86+ image: /boot/memtest86+.bin Found Windows 7 (loader) on /dev/mapper/nvidia_dbedfcca1 error: cannot seek /dev/sdc' grub-probe: error: no mapping exists fornvidia_dbedfcca1' done To no avail. Any idea what I can do to fix this mess? :( Edit: This is my disk configuration. b@dnb:~$ sudo df -l Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/nvidia_dbedfcca5 12302232 2744788 8932520 24% / udev 1030288 268 1030020 1% /dev none 1030288 964 1029324 1% /dev/shm none 1030288 92 1030196 1% /var/run none 1030288 0 1030288 0% /var/lock none 1030288 0 1030288 0% /lib/init/rw /dev/sr0 706532 706532 0 100% /media/cdrom0 Note: /dev/mapper/nvidia_dbedfcca5 is my Linux boot partition

  Read the article

< Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >