Search Results

Search found 17955 results on 719 pages for 'sub domain'.

Page 417/719 | < Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >

  • DHCP server with multiple interfaces on ubuntu, destroys default gateway

    - by Henrik Kjus Alstad
    I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

    Read the article

  • Nameserver usage

    - by user114671
    I have four nameservers registered for a domain: ns1.primary-nameserver.net ns2.primary-nameserver.net a.ns.secondary-nameserver.net b.ns.secondary-nameserver.net How can I find out how much usage each nameserver is getting? Or is it safe to assume that it's 25% to each? Update I don't control the nameservers, they are provided by third party suppliers like DNS Made Easy, Zerigo, Route 53, etc. I am trying to establish whether all listed nameservers are used equally.

    Read the article

  • Temporary DNS server

    - by arcyqwerty
    What DNS software is good for temporary usage while doing server maintenance? Since there is not a secondary server available, I would like a solution that can just run on a desktop/laptop just to keep the records updated (preferably without installation -- just reads the existing zone files) There are backup servers that rely on the master for zone transfers and it would be best not to reconfigure any of the domain record TTLs or the like Master DNS server is running BIND

    Read the article

  • Vmware Player network adapters have no network or internet access in Windows 7 enterprise [closed]

    - by daffers
    As per the title. My VMWare player installation has setup the two network adaptor VMnet1 and VMnet8 and they are picked up as unidentified networks with no network access (i need this to activate my windows server installation on it). The option to change the network location is not available (this might be because of network policy on the domain despite having set this as configurable in the local security policy section). Is there anyway i can change how these networks are detected or alter the configuration of vmware to get around this?

    Read the article

  • DNS delegation on same server with DDNS and second slave server

    - by Austin
    I have two servers running BIND, the first is setup as the master of two zones and the second as a slave for those zones. The zones are example.com and ddns.example.com. I have DDNS running and thousands of device entries are dynamically created in ddns.example.com. I wanted to keep DDNS separate from the main example.com, so I created a separate zone that the DHCP servers update. Considering these zones are hosted on the same server, is it possible to have delegation working from example.com to ddns.example.com? For example if my workstation's search domain is example.com and pointed towards 10.1.10.1 for its DNS provider, I would like to be able to resolve hostname.ddns. As it is, I can resolve hostname.ddns.example.com, but would like to be able to resolve just hostname.ddns. Alternatively, if the workstation's search domain is ddns.example.com, what settings do I need to be able to change to be able to resolve web, ftp, etc, which are all hosts in the parent, example.com zone? Does the ddns.example.com zone need to forward to the example.com zone? Again, all the zones are setup on the same server with a second server setup as a slave. named.conf: zone "example.com" IN { type master; file "example.com"; allow-update { none; }; } zone "ddns.example.com" IN { type master; file "ddns.example.com"; allow-update { key dhcp-update; }; } example.com zone file: $ORIGIN . $TTL 86400 example.com IN SOA ns1.example.com. hostmaster.example.com. ( serial, refresh, retry, etc. ) NS ns1.example.com. NS ns2.example.com. $ORIGIN example.com. ns1 A 10.1.10.1 ns2 A 10.1.10.2 web A 10.1.15.30 ftp A 10.1.15.31 host3 A 10.1.15.32 $ORIGIN ddns.example.com NS ns1 NS ns2 ns1 A 10.1.10.1 ns2 A 10.1.10.2

    Read the article

  • Apache - Serving static files from different subdomain + machine

    - by rubayeet
    Here's the scenario A site is running on this domain - www.someserver.com I'm going to host subdomain.someserver.com on my machine. Let's say all the image files are under the directory 'img'. I don't want to copy all their images to my machine. So what should be the Apache directive(s) that'll map the request for an image, like http://subdomain.someserver.com/img/image.png to http://www.someserver.com/img/image.png

    Read the article

  • I/O intensive MySql server on Amazon AWS

    - by rhossi
    We recently moved from a traditional Data Center to cloud computing on AWS. We are developing a product in partnership with another company, and we need to create a database server for the product we'll release. I have been using Amazon Web Services for the past 3 years, but this is the first time I received a spec with this very specific hardware configuration. I know there are trade-offs and that real hardware will always be faster than virtual machines, and knowing that fact forehand, what would you recommend? 1) Amazon EC2? 2) Amazon RDS? 3) Something else? 4) Forget it baby, stick to the real hardware Here is the hardware requirements This server will be focused on I/O and MySQL for the statistics, memory size and disk space for the images hosting. Server 1 I/O The very main part on this server will be I/O processing, FusionIO cards have proven themselves extremely efficient, this is currently the best you can have in this domain. o Fusion ioDrive2 MLC 365GB (http://www.fusionio.com/load/-media-/1m66wu/docsLibrary/FIO_ioDrive2_Datasheet.pdf) CPU MySQL will use less CPU cores than Apache but it will use them very hard, the E7 family has 30M Cache L3 wichi provide boost performance : o 1x Intel E7-2870 will be ok. Storage SAS will be good enough in terms of performance, especially considering the space required. o RAID 10 of 4 x SAS 10k or 15k for a total available space of 512 GB. Memory o 64 GB minimum is required on this server considering the size of the statistics database. Warning: the statistics database will grow quickly, if possible consider starting with 128 GB directly, it will help. This server will be focused on I/O and MySQL for the statistics, memory size and disk space for the images hosting. Server 2 I/O The very main part on this server will be I/O processing, FusionIO cards have proven themselves extremely efficient, this is currently the best you can have in this domain. o Fusion ioDrive2 MLC 365GB (http://www.fusionio.com/load/-media-/1m66wu/docsLibrary/FIO_ioDrive2_Datasheet.pdf) CPU MySQL will use less CPU cores than Apache but it will use them very hard, the E7 family has 30M Cache L3 wichi provide boost performance : o 1x Intel E7-2870 will be ok. Storage SAS will be good enough in terms of performance, especially considering the space required. o RAID 10 of 4 x SAS 10k or 15k for a total available space of 512 GB. Memory o 64 GB minimum is required on this server considering the size of the statistics database. Warning: the statistics database will grow quickly, if possible consider starting with 128 GB directly, it will help. Thanks in advance. Best,

    Read the article

  • Problem with monitoring Glassfish with JConsole..

    - by Pavel
    I have enabled JMX connection on remote Glassfish server and then I've restarted it. During starting server notified: Standard JMX Clients (like JConsole) can connect to JMXServiceURL: [service:jmx:rmi:///jndi/rmi://myserver:8686/jmxrmi] for domain management purposes. Port 8686 is opened for connections. But I can't connect to server with JConsole.. It says: Connection failed. How can I solve this problem? Thanks in advance.

    Read the article

  • File open fails initially when trying to open a file located on a win2k8 share but eventually can su

    - by Ruddy Douglass
    Core of the problem: I receive "(0x80070002) The system cannot find the file specified" for roughly 8 to 9 seconds before it can open it successfully. In a nutshell, we have two COM components. Component A calls into Component B and asks for a UNC filename to write to - the filename returned doesn't exist yet, but the path does - it then does its work, creates and populates the file, and tells Component B its done by making another com call. At that point Component B will call MoveFile to rename the file to its "official" name. This code has worked for (literally) years. Its works fine on win2k3. Its works fine when its running on win2k8 and points to a share on a win2k3 server. It also runs fine, if the share is actually located on the same win2k8 machine that the code is running on. But if you run it on win2k8 and point it to a share on a different win2k8 server, it fails. Both Component A & component B exist in their own Windows Service running with as a domain admin account. The shares are configured for "Everyone/Full control" in all test environments, similarly so are the underlying folders that the share points to. All machines are in the same domain. During debugging I realized the file actually does exist by the time I get to checking manually for it - after several iterations it occurred to me that the file doesn't "show up" until some delay passes by - so I put in the loop below in component B as shown below: int nCounter = 0; while (true) { CFileStatus fs; if (CFile::GetStatus(tempname, fs)) break; SleepEx(100, FALSE); nCounter++; } This code does, in fact, exit and nCounter is generally between 80 & 90 iterations when it does -- indicating the file "appears" approx 8 to 9 seconds later. Once that loop exits the code can successfully rename the file and all further processing appears to work. I put a CFile::GetStatus in component A immediately before it calls into Component B and that indicates success - it can see the file and get its true size yet the call into component b made immediately after can not see the file until the above indicated delay passes. I have verified the pathnames are precisely the same, even though it would clearly have to be for the calls to eventually succeed after a pause of 8 to 9 seconds... When something like this occurs I always assume there is a bug in my code until proven otherwise, but given (a) this code has executed properly for a very long time and (other than my diagnostic loop added) has not changed, and (b) it works in all environments except the win2k8 - win2k8 share, I'm guessing there is some OS issue in here that i do not understand. Any insight would be helpful. Thanks!

    Read the article

  • Terminal Server 2008 not issuing Volume device CAL's

    - by Pieter
    We've a lot of Volume Licences left, but the License Server apparantly doesn't use them. Instead it issues Temporary Per Device CAL's. Which is a bit odd off course... There are two licensing servers installed on terminal servers, not on a domain controller (these are pushed by SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\LicenseServers registry setting) EDIT: http://img180.imageshack.us/img180/8927/ss20090909135547.png

    Read the article

  • samba 3.5 "force user" doesn't seem to be sticking

    - by myCubeIsMyCell
    After installing a new OS with newer version of samba, I'm having trouble accessing my shares. I can browse to the specific share, but only to the top level. As best I can tell from the logs, it seems the "force user" in the samba config isn't sticking beyond the initial connection. Details below. I installed a new version of CentOS on my storage server. My old CentOS (4?)install had samba version 3.0.33, new CentOS is using 3.5.10. No domain/AD involved ... just home workgroup. no real security... just some shares hidden & some defined as read-only. here's my config: [global] workgroup = WORKGROUP server string = Samba Server Version %v netbios name = luna security = share # logs split per machine log file = /var/log/samba/log.%m log level = 2 # max 50KB per log file, then rotate max log size = 50 winbind use default domain = Yes [strge] comment = please path = /storage browseable = yes read only = no force user = windowsguest force group = users guest ok = yes So... the problem I'm running into is that the 'force user' only seems to hold for the initial connection & I see all the top level folders fine. When I drill into a folder I get access denied - which appears to be due to my windows user info being sent (trys to authenticate xuser - a non-existant user to samba, so maps to nobody & fails). Here's the smb error msg: [2012/11/29 14:30:27.326195, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [xuser] -> [xuser] FAILED with error NT_STATUS_NO_SUCH_USER [2012/11/29 14:30:27.326251, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [nobody] -> [nobody] FAILED with error NT_STATUS_NO_SUCH_USER Most of the top level directories are 755, some 777. Either way, can not access them. If I do a chown -R windowsguest.users ... no change... but if I do a chmod -R to 777 or 755 they become browsable... but still can't create files (even for 777 ones). Not sure what role it plays if any... but had to recreate the user windowsguest under the new os install, uid & gid match old user. Seems the main issue as far as I can tell is that samba isn't maintaining the 'force user' - but I could be wildly off base. Client OS is win7 pro x64. Thanks for any suggestions or advice!

    Read the article

  • Accessing a Windows 7 print share without a password

    - by user101141
    In our network we have a Windows 7 print server. Users connect to this machine by typing \\server_name on their own workstations. The print server and the users` computers are members of Active Directory. In AD, only computers have accounts, users are using local accounts. Is it possible to configure Windows 7 so that it doesn't ask for login and password when a user tries to access it from computer which is member of domain?

    Read the article

  • Trying to setup postfix

    - by Frexuz
    I used this guide: http://jonsview.com/how-to-setup-email-services-on-ubuntu-using-postfix-tlssasl-and-dovecot telnet localhost 25 says 220 episodecalendar.com ESMTP Postfix (Ubuntu) ehlo localhost 250-episodecalendar.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN Installation seems fine? /var/log/mail.log says Nov 26 14:04:06 ubuntu postfix/pickup[12107]: A742E2B9E1: uid=0 from=<root> Nov 26 14:04:06 ubuntu postfix/cleanup[12114]: A742E2B9E1: message-id=<[email protected]> Nov 26 14:04:06 ubuntu postfix/qmgr[12108]: A742E2B9E1: from=<[email protected]>, size=300, nrcpt=1 (queue active) Nov 26 14:04:06 ubuntu postfix/local[12115]: A742E2B9E1: to=<[email protected]>, relay=local, delay=3.3, delays=3.3/0/0/$ Nov 26 14:04:06 ubuntu postfix/cleanup[12114]: AD2662B9E0: message-id=<[email protected]> Nov 26 14:04:06 ubuntu postfix/qmgr[12108]: AD2662B9E0: from=<>, size=2087, nrcpt=1 (queue active) Nov 26 14:04:06 ubuntu postfix/bounce[12117]: A742E2B9E1: sender non-delivery notification: AD2662B9E0 Nov 26 14:04:06 ubuntu postfix/local[12115]: AD2662B9E0: to=<[email protected]>, relay=local, delay=0.02, delays=0.01/0/0/0$ Nov 26 14:04:06 ubuntu postfix/qmgr[12108]: AD2662B9E0: removed Nov 26 14:04:06 ubuntu postfix/qmgr[12108]: A742E2B9E1: removed I'm not really understanding the log file, and obviously I'm not getting any emails. Right now I'm running Ubuntu on a Virtualbox (development box). Is that a problem? The internet connection works fine on it. What about domains etc..? edit: /etc/postfix/main.cf # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client.

    Read the article

  • Simple, free Mac OSX paint program with transparency

    - by Julie
    What FREE software (included with Mac OSX, or public domain) would be a good, simple way to take some existing PNG clipart files do some simple editing? I really only need to do 3 things: Rotate the image. Clip the image. Set a "transparent" color. I don't need anything that takes weeks to learn... or is super-powerful... or super expensive. Thanks.

    Read the article

  • Federated access to desktop and network resources in MS AD domains

    - by Glenn Stauffer
    We are looking for a way to provide members of three loosely connected organizations with access to authenticated resources such as file shares, printers, and lab computers. I've seen federation facilities for web resources; is ther something similar for domain logins? Our Active directory domains are not connected so we would have to use email addresses for the username to insure uniqueness. Is there any openid like mechanism that works for AD logins?

    Read the article

  • Why there are three rounds of message exchanges for integrated windows authentication for IE

    - by user197658
    According to the result monitored by fiddler, there are totally 3 handshakes for integrated windows authentication for IE. GET /home - 401 Unauthorized WWW-Authenticate: Negotiate, NTLM GET /home Authorization: Negotiate UYTYGHGYKHKJPPP-=== - 401 Unauthorized WWW-Authenticate: Negotiate UYUGKJKJKJ+++766== Get /home Authorization: Negotiate HJGKJLJLJ+++=== - 200 OK WWW-Authenticate: Negotiate UHLKJKJKJJLK=== Who knows what concrete things are done for the three, especially the 2nd one. P.S. The network environment is work group mode, other than domain mode, and the server is a website hosted on my local PC. In other words, the client (IE) & the server are both in the same machine.

    Read the article

  • setting up Windows 2008 STD EN on dedicated server

    - by sunny
    Dear experts, I just purchased a dedicated server and i need to setup for hosting my website. Please help me how do i setup the server step by step. server details : Windows 2008 STD EN SQL Server Web 2008 Core2 Quad 2.4GHz 6GB RAM Single-Power 150GB Velociraptor 10K RPM Please help me for : 1.Setting up server and hosting website 2.Email settings 3.How to set DNS as domain is from another host. regards, Sunny

    Read the article

  • WebsitePanel and BIND integration issues

    - by Fariborz Navidan
    I have setup a new Windows server with WebsitePanel stand alone server installed om. I have configured everything. When create a new space in WSP, the only information saved in the DNS zone file is the SOA record and no A record added. Each service has its own DNS zone template records but they are not reflected in domain's DNS zone. Also when delete the space, DNS zone is not deleted. I am using WebsitePanel 1.2.1

    Read the article

  • problem in publishing

    - by girish
    when i am publishing my .net website on my domain it is showing the directory of files when i open my site .. anyone please tell me how to avoid this and make my website open mu home page .

    Read the article

  • qmail throws error "CNAME_­lookup_­failed_­temporarily"

    - by Supratik
    I am using Qmail and when I am sending mails I am sometimes getting the bellow error in my log for a particular domain. Jun 22 05:20:47 221832-web1 qmail: 1308738047.397431 delivery 1040373: deferral: CNAME_lookup_failed_temporarily._(#4.4.3)/ Can anyone please tell me what are the factors responsible for such error ? What are the DNS requests sent by Qmail when sending an email ? FYI: The patch for the DNS cache size issue is already included in Qmail.

    Read the article

  • fcgi_mod and phpmyadmin

    - by Cudos
    I have setup Debian Lenny, Apache2, PHP 5.3.1 fcgi_mod, and MySQL and it works fine. But PHPMyadmin doesn't work. When I go to : http://phpmyadmin.domain.com it downloads the index.php under PHPMyadmin instead of executing it. I think I need to wrap the request in a fcgiwrapper like I did all the virtual hosts. But how do I do that? Apparently there are not that many tutorials on this.

    Read the article

  • How do i setup a Window server 2008 R2 + SQL server 2008 VPS ?

    - by Spencer Lim
    I wish to deploy a trusted apps at the secured way... i got one empty VPS (no operating system) but i don't know how could i install Window server 2008 R2 and SQL server 2008 the version i got is genuine enterprise/ datacenter and sql enterprise the main purpose is used to deploy ASP.Net v4 MVC 2 and XBAP Apps + LINQ also use SQL server for my window application with someway to make it able to remote access May i know anyone here could teach me or introduce some source for me on how to setup the domain, IP, OS and feature all thing, please... i felt confuse here @.@

    Read the article

< Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >