Search Results

Search found 18126 results on 726 pages for 'bsi support'.

Page 418/726 | < Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >

• ML 350 additional SATA RAID controller (mirror only)

  - by Nicholas

  I have a Proliant ML350 G8 with two SAS raid arrays currently set up - thereby maxing the default P420i raid controller. I need to set up a large video dump space in addition to this existing set-up (for non backed up, non-critical, temporary storage). I had planned to just add a 2TB SATA disk and plug it into the motherboard. However I it occurred to me the motherboard might have built-in mirror RAID support? Therefore I could use two SATA disks and have some semblance of redundancy. Is this possible? Or would I need to get a cheap raid card? Any recommendations?

  Read the article

• How do I enable sound with the "linux-virtual" kernel?

  - by Ola Tuvesson

  I've been trying to enable sound for the linux-virtual kernel as I want to run an ultra slim Ubuntu server under VirtualBox but need audio. The resource usage difference between virtual and generic/server is surprisingly large, with the virtual kernel system using 80Mb less RAM after a clean boot (130Mb vs 210Mb), and I really want to squeeze every clock cycle and available byte I can out of the system. Besides, the virtual kernel has some additional optimisations enabled specifically for virtual machines (or so I am told). Now I have compiled my own kernel a few times in the past, for example to include the Intel-PHC module (for improved power management on Thinkpads), so the concept is not entirely alien to me, but I've run into a strange problem which I'm hoping someone can help explain: When I do a diff between the config files for Linux-generic and Linux-virtual there are precious few differences, and certainly none which pertain to sound support; there are really only five or six lines which differ, and they're mainly to do with i/o timing, sleep state and priorities. What gives? I expected the differences to be extensive, and that I would be able to identify the options that enabled audio by looking at them, but my problem doesn't seem to be related to the config file at all (yes, I know about the sound drivers section - it is identical between the two kernel configs). Am I looking in the wrong place? Many thanks!

  Read the article

• Java HttpURLConnection class Program

  - by pandu

  I am learning java. Here is the sample code of HttpURLConnection class usage in some text book import java.net.*; import java.io.*; import java.util.*; class HttpURLDemo { public static void main(String args[]) throws Exception { URL hp = new URL("http://www.google.com"); HttpURLConnection hpCon = (HttpURLConnection) hp.openConnection(); // Display request method. System.out.println("Request method is " + hpCon.getRequestMethod()); // Display response code. System.out.println("Response code is " + hpCon.getResponseCode()); // Display response message. System.out.println("Response Message is " + hpCon.getResponseMessage()); // Get a list of the header fields and a set // of the header keys. Map<String, List<String>> hdrMap = hpCon.getHeaderFields(); Set<String> hdrField = hdrMap.keySet(); System.out.println("\nHere is the header:"); // Display all header keys and values. for(String k : hdrField) { System.out.println("Key: " + k + " Value: " + hdrMap.get(k)); } } } Question is Why hpCon Object is declared in the following way? HttpURLConnection hpCon = (HttpURLConnection) hp.openConnection(); instead of declaring like this HttpURLConnection hpCon = new HttpURLConnection(); Author provided the following explanation. I cant understand Java provides a subclass of URLConnection that provides support for HTTP connections. This class is called HttpURLConnection. You obtain an HttpURLConnection in the same way just shown, by calling openConnection( ) on a URL object, but you must cast the result to HttpURLConnection. (Of course, you must make sure that you are actually opening an HTTP connection.) Once you have obtained a reference to an HttpURLConnection object, you can use any of the methods inherited from URLConnection

  Read the article

• SharePoint 2007 / 2010 Content Indexing &ldquo;The file reached the maximum download limit. Check that the full text of the document can be meaningfully crawled.&rdquo;

  - by Stacy Vicknair

  If you have large files in a content source that is being indexed by Sharepoint you might run into the following error message: “The file reached the maximum download limit. Check that the full text of the document can be meaningfully crawled.” This is usually caused because SharePoint’s MaxDownloadSize setting is set lower than the size of the file you are attempting to index. You can increase this value, restart the service then kick off a full crawl in order to fix this issue, but SharePoint 2007 and 2010 have different methods for accomplishing this task.   Sharepoint 2007 Open up the Registry editor and increase the MaxDownloadSize value to a number (in MB) higher than the largest file being indexed. You can find this at: HKEY_LOCAL_MACHINE\Software\Microsoft\Search\1.0\Gathering Manager After you increase the size, cycle the search service and kick off a full crawl of the content source in question.   Sharepoint 2010 With SharePoint 2010 you can use PowerShell via the Sharepoint 2010 Console in order to change the MaxDownloadSize. Execute the following commands to update the value: 1: $ssa = Get-SPEnterpriseSearchServiceApplication 2: $ssa.SetProperty(“MaxDownloadSize”, <new size in MB>) 3: $ssa.Update()   References: http://support.microsoft.com/kb/287231 http://blogs.technet.com/b/brent/archive/2010/07/19/sharepoint-server-2010-maxdownloadsize-and-maxgrowfactor.aspx   Technorati Tags: SharePoint,WSS,MaxDownloadSize,Search

  Read the article

• ADF sessions at UKOUG conference by Grant Ronald

  - by JuergenKress

  For those in the UK, or those who have a few travel dollars left in their budget I just wanted to hi-light a couple of reasons you might want to present to your management as to why you should attend the UKOUG conference this year to get your ADF fill. Firstly, there are three days packed with the ADF content from the brightest minds in ADF-land. In no particular order, some of the stand out sessions for me will be: Duncan Mills presenting a keynote on the Future of Oracle's Fusion Development Luc Bors will be demoing ADF Mobile Frank Nimphius will be giving a tour around JDeveloper 12c Steven Davelaar of JHeadstart fame will be giving an insight on task flows and ADF Faces. Aino Andriessen will focus on build and deployment Frank Houweling will tell us how he can make your ADF application run 70% faster Chris Muir will give a masterclass on ADF architecture. In addition, the UKOUG will be running a 3 days of ADF Mobile hands-on sessions. Mobile is just about the hottest development topic at this time so this is an ideal opportunity to roll up your sleeves and build on-device mobile applications. There will also be a roundtable discussion on which development tool is right for you, and a roundtable on the strategic importance of ADF. Of course, the conference is not all about ADF; Tom Kyte will be there, Cliff Godwin (SVP who looks after Oracle Applications) and a host of others. This might be a great opportunity to get some ADF education. For more adf information visit Grant Ronald’s blog. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: ADF,UKOUG,conference,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Moving my bcd from HDD to SSD - Windows 7

  - by lelouch

  I have windows 7 installed on my SSD, but the /boot/ and bootmgr are on my hard-drive. I want to move them to my SSD for faster booting times. So i figured that I can fix the problem using the Windows startup repair tool. I made a bootable windows 7 flash drive, and ran Windows startup repair. However, it exits with an error. I also can't see my OS in the list of installed OSs. I then tried fixing via the command prompt with bootrec /fixmbr, bootrec /fixboot, bootrec /rebuildbcd. Bootrec /rebuildbcd finds the OS, but gives me the error "The requested system device cannot be found" when i try fixing it. Does anyone know why this is failing? I read somewhere that the Windows Repair environment doesn't support a flash drive, which is why I'm getting that error. Is this true? Unforunately my dvd drive is playing up so I can't use it to test this.

  Read the article

• Advantage of using nexenta vs. OpenSolaris

  - by jotango

  I am currently building a NAS for about 24 TB of storage. Video files, slow access, long term storage. No performance issues. I am currently undecided between buying a JBOD case and installing OpenSolaris (because of ZFS), or purchasing a Nexenta license. The difference is about $ 12.500 for licenses over three years. What would you see as the main advantage in purchasing a nexenta license, beside the support? Did nexenta really enhance the basic OpenSolaris, or is it just a lot of marketing speak? No one really wanted to answer that question.

  Read the article

• Firefox 12's hardware acceleration on Ubuntu 12.04 LTS

  - by user64943

  After I have installed Ubuntu 12.04 LTS (32 bits), Firefox 12 works fine but without hardware acceleration. Needless to say I have the latest nVidia's proprietary drivers installed and my Firefox Preferences, on "Advanced" tab, "Browsing" section, have the option "Use hardware acceleration when available" checked. I have tried the following things before asking this question: Creating a boolean key "webgl.force-enabled" and set it to true on Firefox's page about:config; Starting a new profile like commented on thread Mozilla Firefox 12 is very slow on Ubuntu 12.04 LTS; I have updated my nVidia driver to version 295.53. And none of this have worked. As you can see below in my Firefox's page about:support report, "Graphics" section shows no "GPU Accelerated Windows": Adapter Description NVIDIA Corporation -- GeForce GTX 460/PCIe/SSE2 Vendor ID NVIDIA Corporation Device ID GeForce GTX 460/PCIe/SSE2 Driver Version 4.2.0 NVIDIA 295.53 WebGL Renderer NVIDIA Corporation -- GeForce GTX 460/PCIe/SSE2 -- 4.2.0 NVIDIA 295.53 GPU Accelerated Windows 0 AzureBackend skia I use the following site to test hardware acceleration: http://ie.microsoft.com/testdrive/Performance/FishBowl/ On Windows 7 I get 60 fps even with 1,750 fishes on browser's Full Screen Mode (1680x1050x32bit-color). On Ubuntu 12.04 LTS, same nVidia drivers (as shown in report), won't go faster than 15 fps with only 1,000 fishes. Can anybody help me? Best Regards,

  Read the article

• HP Envy webcam pictures all purple

  - by kousen

  I have a new HP Envy 15 with an integrated webcam, running Win 7. It works, but all the images are purple, suggesting to me that the red and blue guns are working, but the green isn't. The problem shows up on both their own software and on Skype. I talked to tech support, and they had me update the BIOS, reinstall the hardware BIOS for the webcam, and update the webcam software. It therefore sounds like a hardware problem, but they won't back that unless I do a full restore, which would wipe my disk of all the software I've spent the last couple of weeks configuring. Is there anything else I can try? Other than just buying another webcam, I mean. Any suggestions would be appreciated.

  Read the article

• Linux/bsd tcp load balancing with 10 gigabit ethernet

  - by user37899

  Okay, I've been looking at layer 4 load balancing solutions for 10 gigabit links. I need the following properties Works at 10Gig ethernet speeds. Can support long live tcp connections. up to 1mil live tcp connections. Balancer not involved in the return path. Fault tolerant with tcp session fail over. low latency and good through put. can be scripted. Either a software or hardware solution. Can it be done? Anyone doing this?

  Read the article

• I would like to prevent these entries from being added to the eventlog.

  - by David Smith

  Our client's application EventLog is getting filled up with warnings due to a bug in the Microsoft SQL Server report viewer control, http://support.microsoft.com/kb/973219. They have thousands of users running reports so this is making their eventlog hard to use and they want them removed on a frequent basis. I tried using PowerShell to remove the events, but that does not seem possible. Is there a way to prevent these entries from being written to the event log in the first place? I'm thinking I would like to filter out events where event source="ASP.NET 2.0.50727.0", eventId ="1309" and Message contains "Reserved.ReportViewerWebControl.axd"

  Read the article

• Regedit as Current User

  - by user1013264

  I'm trying to apply a registry fix for an Outlook/O365 issue on a user's account. The issue is that "regedit" is blocked by a domain GPO. I'm able to run "gpedit" using the local admin account. Question : When I run "regedit as the local admin, am I modifying the registry for the local admin user or the domain user who's actually logged onto the workstation? I'm trying to apply the following fix: http://support.microsoft.com/kb/2843677 Also, the path for the above mentioned registry should end in " \Preferences" which is what I'm unable to locate. I'm able to navigate up until \Outlook. Any suggestions would be appreciated. Thank you. Running Outlook 2010.

  Read the article

• How do I get Intel 845g graphics working?

  - by Rayson Jimenez

  I need help enabling Intel 845g to run with intel drivers. I'v looked everywhere on the net with no joy. I can't seem to get intel video drivers to load the gui, only with vesa drivers. it drops me straight to the shell prompt. Xorg.0.log shows the following. Any help would be GREATLY appreciated. [ 244.843] (II) LoadModule: "intel" [ 244.843] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 244.844] (II) Module intel: vendor="X.Org Foundation" [ 244.844] compiled for 1.9.0, module version = 2.12.0 [ 244.844] Module class: X.Org Video Driver [ 244.844] ABI class: X.Org Video Driver, version 8.0 [ 244.844] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 244.844] (--) using VT number 8 [ 244.971] (EE) intel(0): No kernel modesetting driver detected. [ 244.971] (II) UnloadModule: "intel" [ 244.971] (EE) Screen(s) found, but none have a usable configuration. [ 244.971] Fatal server error: [ 244.971] no screens found [ 244.971] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 244.971] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 244.971] [ 245.213] ddxSigGiveUp: Closing log

  Read the article

• Almost at our first year anniversary!

  - by Vizioz Limited

  It has been a hectic first year at Vizioz and things are still going from strength to strength. 11 months ago I started Vizioz with zero capital investment in the middle of a recession, which to some may seem a daunting prospect but to others including myself it was the challenge I needed to make me want to get up in the morning :) I wanted to prove that even in the curent financial climate it is still possible to start a new business.We are still experiencing the normal growing pains of a small business but this is something we just need to work our way through, it is amazing how much paperwork and administration there is running a small business, office admin, insurance, vat and for the last few months PAYE.For the last 9 months we have shared an office with another small business called Little Big Ideas. They are a design agency working across a broad spectrum of design from branding, print and digital. Last month we decided to move offices to a larger office and now have room for 8 of us, so now we need a couple more clients to help produce enough work to fill the space and grow to the next level.As well as moving office 2 months ago I blogged about my first employee Colin starting work for me, he has picked up Umbraco very well and has mastered the art of good CSS design, as the majority of our clients are large multi-nationals they still require support for IE6 which as all web developers know is the nightmare of all web browsers.This month has seen the next step in the growth of Vizioz as I have taken on another PhD graduate called Pricilla, welcome to the team!This month we plan to launch our own website to enable us to showcase some of the sites we have built over the past 11 months and to allow potential clients to see what we can offer. We might still be relatively small but we have some great case studies to show and with two PhD graduates on the team we have great talent capable of producing complex and innovative solutions for our clients. As soon as we have launched out new website I will blog again about what the future holds for Vizioz and what we can offer our prospective clients as well as e obvious Umbraco CMS solutions.

  Read the article

• new monitor won't work on win3.1

  - by Rick Workover

  My old system monitor for my Windows 3.1 machine failed and the new flat screen has a sync error. The new monitors do not support the refresh/screen size it is set to. It boots up into Windows and the monitor is blank with a sync error. Without Windows 3.1 working I don't know how to change the refresh/size to get it to work. I haven't used Win3.1 in so long that I can't remember how to fix this. So, how do I reset the refresh rate and screen resolution it is set to, without being able to actually see anything?

  Read the article

• Wireless driver not detected by Windows 8

  - by rksh

  I've a problem in my wireless driver on windows 8. I bought a new X500L Asus laptop and installed windows 8 on it. However the driver CD I got with the laptop doesn't support my laptop. The CD says it's designed for Windows 8.1. I tired finding Wireless driver model and finding driver online and installing and that hasn't worked either, the wireless driver is shown at the device manager as not installed. I tired live booting the computer with a live CD of Linux and that also doesn't pick up my wireless driver. Can anyone tell me how to fix it? Thanks

  Read the article

• Xen 4.0.1 on Ubuntu 10.10 not booting

  - by Disco

  I'm trying to get Xen 4.0.1 run as dom0 on a fresh/clean install of 10.10 desktop (x64). Followed the step by step tutorial at http://wiki.xensource.com/xenwiki/Xen4.0 I have the pvops kernel in /boot, also included the ext4 fs support by recompiling the kernel by : make -j6 linux-2.6-pvops-config CONFIGMODE=menuconfig make -j6 linux-2.6-pvops-build make -j6 linux-2.6-pvops-install Here's my grub entry : menuentry 'Xen4' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 insmod ext3 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 2bf3177a-92fd-4196-901a-da8d810b04b4 multiboot /xen-4.0.gz dom0_mem=1024M loglvl=all guest_loglvl=all module /vmlinuz-2.6.32.27 root=UUID=2bf3177a-92fd-4196-901a-da8d810b04b4 ro module /initrd.img-2.6.32.27 } blkid /dev/sda1 gives the : /dev/sda1: UUID="2bf3177a-92fd-4196-901a-da8d810b04b4" TYPE="ext3" My partition shemes is : /boot (ext3) / (ext4) Whatever option i've tried i end up with : mounting none on /dev failed: no such file or directory And message complaining that it cannot find the device with uuid ... It's taking my hairs out, if somone has a clue ...

  Read the article

• Thin virtual host [migrated]

  - by Adam Ryczkowski

  My work setup relies on old Windows XP. Now, when Windows XP isn't supported by new hardware, it's getting harder and harder to buy a notebook on which Windows XP can run natively with all essential hardware (wireless cards, graphics, sound etc). Since I don't expect my personal setup to turn away from Windows XP any time soon, I'm investigating the following trick: why not buy any decent hardware which Linux can fully utilize, and use it as a virtual host for a guest session with e.g. Windows XP. I like using hibernation, so I prefer this Linux to be as thin as possible, only enough to support VirtualBox, KVM or any other virtualization software. Question: Are there any "standard" ways to do this, like Linux distributions aimed specifically on being light virtualization host?

  Read the article

• Fatal error on "mode 120000" file during git -> svn migration

  - by Oliver

  Following instructions from the following website: http://code.google.com/p/support/wiki/ImportingFromGit I'm trying to migrate a git repository to svn, but during the "git rebase master tmp" step it fails with the following error after apply the first few patches: $ git rebase master tmp First, rewinding head to replay your work on top of it... Applying: Imported Applying: Cleaned up the readme file Applying: fix problem with versions fatal: unable to write file foobar mode 120000 Patch failed at 0003 fix problem with versions When you have resolved this problem run "git rebase --continue". If you would prefer to skip this patch, instead run "git rebase --skip". To restore the original branch and stop rebasing run "git rebase --abort". I understand that 120000 may refer to a symlink, but Subversion has supported symlinks for a long time now. Subversion installed is 1.6.5, Git is 1.6.3.3. Running on Ubuntu Linux. The system is not running out of disk space and this operation is taking place within my home directory so permissions should not be an issue.

  Read the article

• AWS Autoscaling issue with existing nodes in ELB

  - by Ram Prasad

  I already have a ELB setup called MyLoadBalancer. I already have 2 nodes running on it with health checks (that checks a URL on the node to see if they are up) Created an autoscaling group (min 2, Max 10) Associated launchconfig mylaunchconfig that provisions a node using an AMI Created a trigger, that checks for avg min connections of 100 and Max of 500 (checks the load balancer and it is support to increase the node count by 1, if avg connections are 500 and decrease by one if less than 100) as-create-or-update-trigger MyTrigger --auto-scaling-group MyAutoScalingGroup --namespace "AWS/ELB" --measure RequestCount --statistic Average --dimensions "LoadBalancerName=MyLoadBalancer" --period 60 --lower-threshold 500 --upper-threshold 800 --lower-breach-increment=-1 --upper-breach-increment=1 --breach-duration 600 Now the issue is, as soon as I put in the trigger, it start 2 nodes .... but there are already two nodes in the LB. So, why is it provisioning 2 more nodes, when the nodes are there ? is it because it is not recognizing the existing 2 nodes ? then how do I add the existing nodes to the AutoScaling group ?

  Read the article

• (simple) linux HA with vmware vsphere?

  - by derhelge

  I hope my upcoming question is specific enough, and you are able and willing to support :-) We have several openSUSE VMs in an ESX-Cluster (three ESX-Servers) with an attached iSCSI-SAN. All of those Linux VMs are "single point of failure"-configured, which means in the case of a Web-Server: LAMP, storage, etc. everything on this machine. This was very simple and in case of a failure (in the last years: kernel panics or apache crashes) a simple reboot triggered by a script did it. But the problem is: How to upgrade/maintain the w(eb-)application or the underlying OS without downtime? This wasn't really managable and i did this in the early morning ;) How can i achieve a "simple" High-Availability Cluster now? I thought of: DRBD with heartbeat with 2 VMs. And for the storage a RDM (raw device mapped) LUN and change the read-write-permissions for both VMs. Is this a good idea? Anyone has a better solution?

  Read the article

• Why Wifi no longer works 12.04.1

  - by Roger

  starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

  Read the article

• How to Shrink large Hyper-V VM

  - by autrevo

  Using Disk2VHD utility I converted my bare-metal OS into Hyper-V VHD - http://technet.microsoft.com/en-us/sysinternals/ee656415.aspx And I could obtain a huge 190GB VHD file. Apart from performance issues, this VHD worked fine as guest when hosted on Windows Server 200 R2, Hyper-V. Having realized need to keeping only system files and application installations on VHD. I have deleted most of the junk data from this VHD and now it contains only 20-25 GB. But I am not able to shrink the VHD VM. Having done some research, I came to know, this as a limitation of .VHD files. Subsequently I followed these two step using Edit Virtual Hard Wizard on Windows 2012 Box. Convert from VHD to VHDX (took close to 3 hrs.) Compact (Another 4 hrs.) This did not ever shrink the VHDX either. Does Hyper-V does not provide proper support to handle large VHDs or VHDXs whose size are the range of 200GB.

  Read the article

• Cannot install extensions required for GNOME Shell themes

  - by Soham Chowdhury

  I keep getting this output: soham@fortress:~$ sudo apt-get install gnome-shell-extensions gnome-tweak-tool Reading package lists... Done Building dependency tree Reading state information... Done gnome-tweak-tool is already the newest version. The following NEW packages will be installed: gnome-shell-extensions 0 upgraded, 1 newly installed, 0 to remove and 43 not upgraded. 1 not fully installed or removed. Need to get 0 B/121 kB of archives. After this operation, 849 kB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 179291 files and directories currently installed.) Unpacking gnome-shell-extensions (from .../gnome-shell-extensions_3.4.1~git20120508.dfd7191a-0ubuntu1~12.04~ricotz0_all.deb) ... dpkg: error processing /var/cache/apt/archives/gnome-shell-extensions_3.4.1~git20120508.dfd7191a-0ubuntu1~12.04~ricotz0_all.deb (--unpack): trying to overwrite '/usr/share/locale/lv/LC_MESSAGES/gnome-shell-extensions.mo', which is also in package gnome-shell-extensions-common 3.2.0-0ubuntu1~oneiric1 No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/gnome-shell-extensions_3.4.1~git20120508.dfd7191a-0ubuntu1~12.04~ricotz0_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Update: Fixed that. Now GNOME Tweak Tool shows me an exclamation mark beside the extension enable button, saying "Extension doesn't support shell version". My GNOME shell is already the latest version. Help!

  Read the article

• Smartcards for storing gpg/ssh keys (Linux) - what do I need?

  - by Ninefingers

  Hi All, I'm interested in storing my SSH keys and gpg keys on a smartcard for added security. However, I'm a bit uncertain on a few points, which are as follows: How many keys can I get on a card? I assume both SSH and GPG can store keys on the card. Is there a limit to key size? I see a lot of cards saying they support 2048-bit keys, what about larger sizes? Hardware: can anyone recommend a card/reader combination that works well? I've done a fair amount of research and it seems PC/SC readers can be a bit iffy - is this your experience? Have I missed anything I should be asking? Are there any other hurdles? I'm aware fsf europe give away cards with membership - I'm not sure I want to join, but... are these cards any good?

  Read the article

< Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >