memory alignment - Page 418

Data structures for a 2D multi-layered and multi-region map?

- by DevilWithin

I am working on a 2D world editor and a world format subsequently. If I were to handle the game "world" being created just as a layered set of structures, either in top or side views, it would be considerably simple to do most things. But, since this editor is meant for 3rd parties, I have no clue how big worlds one will want to make and I need to keep in mind that eventually it will become simply too much to check, handling and comparing stuff that are happening completely away from the player position. I know the solution for this is to subdivide my world into sub regions and stream them on the fly, loading and unloading resources and other data. This way I know a virtually infinite game area is achievable. But, while I know theoretically what to do, I really have a few questions I'd hoped to get answered for some hints about the topic. The logic way to handle the regions is some kind of grid, would you pick evenly distributed blocks with equal sizes or would you let the user subdivide areas by taste with irregular sized rectangles? In case of even grids, would you use some kind of block/chunk neighbouring system to check when the player transposes the limit or just put all those in a simple array? Being a region a different data structure than its owner "game world", when streaming a region, would you deliver the objects to the parent structures and track them for unloading later, or retain the objects in each region for a more "hard-limit" approach? Introducing the subdivision approach to the project, and already having a multi layered scene graph structure on place, how would i make it support the new concept? Would you have the parent node have the layers as children, and replicate in each layer node, a node per region? Or the opposite, parent node owns all the regions possible, and each region has multiple layers as children? Or would you just put the region logic outside the graph completely(compatible with the first suggestion in Q.3) When I say virtually infinite worlds, I mean it of course under the contraints of the variable sizes and so on. Using float positions, a HUGE world can already be made. Do you think its sane to think beyond that? Because I think its ok to stick to this limit since it will never be reached so easily.. As for when to stream a region, I'm implementing it as a collection of watcher cameras, which the streaming system works with to know what to load/unload. The problem here is, i will be needing some kind of warps/teleports built in for my game, and there is a chance i will be teleporting a player to a unloaded region far away. How would you approach something like this? Is it sane to load any region to memory which can be teleported to by a warp within a radius from the player? Sorry for the huge question, any answers are helpful!

Read the article

CES 2011–Microsoft Keynote Impressions

- by guybarrette

Microsoft has been kicking off the CES for a number of years by doing a keynote the evening of the event first day. This year, SteveB talked about Xbox, Kinect, Windows 7 new laptops, Surface 2 and Windows vNext running on the ARM architecture. Some of the design of the new laptops showed are quite amazing. This one has a dual screen with no physical keyboard. The image is split between both screens. A software keyboard appears when you place your 10 fingers on the lower screen. This one from Samsung has a sliding keyboard somewhat like numerous cell phones have. What I found the most amazing is that Intel was able to miniaturized a full Intel architecture (CPU, motherboard, memory) in a tiny form factor. Imagine having the power of a full PC running .NET apps in a Zune/iPod form factor! They also showed V2 of the Surface device. This one is called the Samsung SUR40 for Surface PC. It’s much sleeker and it will likely loose the BAT (Big Ass Table) moniker More info here SteveB announced that Windows vNext will run on ARM chips. I’m intrigued by this announcement (you can read about it here) and I have many questions: -In the past ARM devices were slow, what now makes the ARM architecture able to run Windows? -ARM is 32-bit only, I think. -Does this mean that Intel wasn't able to provide such a lightweight architecture or simply that they weren't interested? -From what I understand, apps would need to be recompiled for ARM. Will we need to do that from an ARM PC or could it be done natively on Intel or on an Intel PC running in an ARM VM? VS 2012? Ahhhh, smells like a cool PDC is coming up Clearly it looks like PC have enough power for most of us right now and that the race is now about miniaturization, power consumption and battery life. You can watch the Microsoft CES 2011 keynote here var addthis_pub="guybarrette";

Read the article

Reference Data Management

- by rahulkamath

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableColorfulListAccent2 {mso-style-name:"Colorful List - Accent 2"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:72; mso-style-unhide:no; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-tstyle-shading:#F8EDED; mso-tstyle-shading-themecolor:accent2; mso-tstyle-shading-themetint:25; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; color:black; mso-themecolor:text1;} table.MsoTableColorfulListAccent2FirstRow {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:first-row; mso-style-priority:72; mso-style-unhide:no; mso-tstyle-shading:#9E3A38; mso-tstyle-shading-themecolor:accent2; mso-tstyle-shading-themeshade:204; mso-tstyle-border-bottom:1.5pt solid white; mso-tstyle-border-bottom-themecolor:background1; color:white; mso-themecolor:background1; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableColorfulListAccent2LastRow {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:last-row; mso-style-priority:72; mso-style-unhide:no; mso-tstyle-shading:white; mso-tstyle-shading-themecolor:background1; mso-tstyle-border-top:1.5pt solid black; mso-tstyle-border-top-themecolor:text1; color:#9E3A38; mso-themecolor:accent2; mso-themeshade:204; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableColorfulListAccent2FirstCol {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:first-column; mso-style-priority:72; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableColorfulListAccent2LastCol {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:last-column; mso-style-priority:72; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableColorfulListAccent2OddColumn {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:odd-column; mso-style-priority:72; mso-style-unhide:no; mso-tstyle-shading:#EFD3D2; mso-tstyle-shading-themecolor:accent2; mso-tstyle-shading-themetint:63; mso-tstyle-border-top:cell-none; mso-tstyle-border-left:cell-none; mso-tstyle-border-bottom:cell-none; mso-tstyle-border-right:cell-none; mso-tstyle-border-insideh:cell-none; mso-tstyle-border-insidev:cell-none;} table.MsoTableColorfulListAccent2OddRow {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:odd-row; mso-style-priority:72; mso-style-unhide:no; mso-tstyle-shading:#F2DBDB; mso-tstyle-shading-themecolor:accent2; mso-tstyle-shading-themetint:51;} Reference Data Management Oracle Data Relationship Management (DRM) has always been extremely powerful as an Enterprise MDM solution that can help manage changes to master data in a way that influences enterprise structure, whether it be mastering chart of accounts to enable financial transformation, or revamping organization structures to drive business transformation and operational efficiencies, or mastering sales territories in light of rapid fire acquisitions that require frequent sales territory refinement, equitable distribution of leads and accounts to salespersons, and alignment of budget/forecast with results to optimize sales coverage. Increasingly, DRM is also being utilized by Oracle customers for reference data management, an emerging solution space that deserves some explanation. What is reference data? Reference data is a close cousin of master data. While master data may be more rapidly changing, requires consensus building across stakeholders and lends structure to business transactions, reference data is simpler, more slowly changing, but has semantic content that is used to categorize or group other information assets – including master data – and give them contextual value. The following table contains an illustrative list of examples of reference data by type. Reference data types may include types and codes, business taxonomies, complex relationships & cross-domain mappings or standards. Types & Codes Taxonomies Relationships / Mappings Standards Transaction Codes Industry Classification Categories and Codes, e.g., North America Industry Classification System (NAICS) Product / Segment; Product / Geo Calendars (e.g., Gregorian, Fiscal, Manufacturing, Retail, ISO8601) Lookup Tables (e.g., Gender, Marital Status, etc.) Product Categories City à State à Postal Codes Currency Codes (e.g., ISO) Status Codes Sales Territories (e.g., Geo, Industry Verticals, Named Accounts, Federal/State/Local/Defense) Customer / Market Segment; Business Unit / Channel Country Codes (e.g., ISO 3166, UN) Role Codes Market Segments Country Codes / Currency Codes / Financial Accounts Date/Time, Time Zones (e.g., ISO 8601) Domain Values Universal Standard Products and Services Classification (UNSPSC), eCl@ss International Classification of Diseases (ICD) e.g., ICD9 à IC10 mappings Tax Rates Why manage reference data? Reference data carries contextual value and meaning and therefore its use can drive business logic that helps execute a business process, create a desired application behavior or provide meaningful segmentation to analyze transaction data. Further, mapping reference data often requires human judgment. Sample Use Cases of Reference Data Management Healthcare: Diagnostic Codes The reference data challenges in the healthcare industry offer a case in point. Part of being HIPAA compliant requires medical practitioners to transition diagnosis codes from ICD-9 to ICD-10, a medical coding scheme used to classify diseases, signs and symptoms, causes, etc. The transition to ICD-10 has a significant impact on business processes, procedures, contracts, and IT systems. Since both code sets ICD-9 and ICD-10 offer diagnosis codes of very different levels of granularity, human judgment is required to map ICD-9 codes to ICD-10. The process requires collaboration and consensus building among stakeholders much in the same way as does master data management. Moreover, to build reports to understand utilization, frequency and quality of diagnoses, medical practitioners may need to “cross-walk” mappings -- either forward to ICD-10 or backwards to ICD-9 depending upon the reporting time horizon. Spend Management: Product, Service & Supplier Codes Similarly, as an enterprise looks to rationalize suppliers and leverage their spend, conforming supplier codes, as well as product and service codes requires supporting multiple classification schemes that may include industry standards (e.g., UNSPSC, eCl@ss) or enterprise taxonomies. Aberdeen Group estimates that 90% of companies rely on spreadsheets and manual reviews to aggregate, classify and analyze spend data, and that data management activities account for 12-15% of the sourcing cycle and consume 30-50% of a commodity manager’s time. Creating a common map across the extended enterprise to rationalize codes across procurement, accounts payable, general ledger, credit card, procurement card (P-card) as well as ACH and bank systems can cut sourcing costs, improve compliance, lower inventory stock, and free up talent to focus on value added tasks. Specialty Finance: Point of Sales Transaction Codes and Product Codes In the specialty finance industry, enterprises are confronted with usury laws – governed at the state and local level – that regulate financial product innovation as it relates to consumer loans, check cashing and pawn lending. To comply, it is important to demonstrate that transactions booked at the point of sale are posted against valid product codes that were on offer at the time of booking the sale. Since new products are being released at a steady stream, it is important to ensure timely and accurate mapping of point-of-sale transaction codes with the appropriate product and GL codes to comply with the changing regulations. Multi-National Companies: Industry Classification Schemes As companies grow and expand across geographies, a typical challenge they encounter with reference data represents reconciling various versions of industry classification schemes in use across nations. While the United States, Mexico and Canada conform to the North American Industry Classification System (NAICS) standard, European Union countries choose different variants of the NACE industry classification scheme. Multi-national companies must manage the individual national NACE schemes and reconcile the differences across countries. Enterprises must invest in a reference data change management application to address the challenge of distributing reference data changes to downstream applications and assess which applications were impacted by a given change.

Read the article

Issues with LVM partition size in Server 13.04

- by Michael

I am new to ubuntu and a little confused about how hard drive partitions and LVM works. I remember setting up Ubuntu server 13.04 and telling to to use 1TB of a 3TB server. Well I have maxed that out with blu-ray rips and want the rest of the drive for space. On log-in it says: System load: 2.24 Processes: 179 Usage of /: 88.7% of 912.89GB Users logged in: 0 Memory usage: 6% IP address for p5p1: 192.168.0.100 Swap usage: 0% => / is using 88.7% of 912.89GB lvdisplay outputs: --- Logical volume --- LV Path /dev/DeathStar-vg/root LV Name root VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 1 LV Size 2.70 TiB Current LE 707789 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Path /dev/DeathStar-vg/swap_1 LV Name swap_1 VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 2 LV Size 3.75 GiB Current LE 959 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1 vgdisplay outputs: VG Name DeathStar-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 2.73 TiB PE Size 4.00 MiB Total PE 715335 Alloc PE / Size 708748 / 2.70 TiB Free PE / Size 6587 / 25.73 GiB df outputs: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/DeathStar--vg-root 957238932 848972636 59634696 94% / none 4 0 4 0% /sys/fs/cgroup udev 1864716 4 1864712 1% /dev tmpfs 374968 1060 373908 1% /run none 5120 4 5116 1% /run/lock none 1874824 148 1874676 1% /run/shm none 102400 24 102376 1% /run/user /dev/sda2 234153 56477 165184 26% /boot And fdisk /dev/sda -l outputs: Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. I just don't know what to make of all this and am not sure how I can make it use all 2.73TBs. Thanks in advance for any help. EDIT-- Yes I did make changes to the LVM Config, but it didnt do anything. As requested, output of parted -l /dev/sda Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2097kB 1049kB bios_grub 2 2097kB 258MB 256MB ext2 3 258MB 3001GB 3000GB lvm Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sdb: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-swap_1: 4022MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 4022MB 4022MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-root: 2969GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2969GB 2969GB ext4

Read the article

CodePlex Daily Summary for Thursday, June 12, 2014

CodePlex Daily Summary for Thursday, June 12, 2014Popular ReleasesLuna ORM - Data Layer Code Generator for Vb.Net and C#: Luna 4.14.6.7: Newer version, better LunaEngine with many new feature. Any class implements IDisposable.StackBuilder: StackBuilder 1.0.21.0: *Issue #9 : Take weight of case into account while searching optimal case... *Issue #10 : Changing direction of last layer to use remaining space while stacking a palette... *Issue #11 : New URL for AutoUpdater section in app.config... First working version of INTEX Corp Plugin...QuickMon: Version 3.15: This release expand on 'Presets' - now called Templates. A complete Template editor has been added so you can manage templates(edit, save, import and export). Existing agent configs can be saved as a template for reuse as well. Additionally a few other fixes were done as well. 1. Fixed Registry collector - allow 'blank' key value (<default> values) 2. Default Monitor pack history size is now 100 3. qmp file extension is now the defaultCommand Line Media Controller: v1.0.0.0: Initial ReleaseVidCoder: 1.5.23 Beta: Added first translations for 1.5. Includes new languages Portuguese, Japanese, Chinese Simplified and Czech. Many of these translations are still incomplete: you can help out on Crowdin. Added an option to pass through an input track if it matches the output codec. Updated HandBrake core to SVN 6209. Fixed crash on AAC passthrough. Fixed x264 settings getting set incorrectly when reverting from a preset with the Advanced tab. Fixed occasional crash when calculating remaining time. ...PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.4: Added New-Folder and Remove-Folder functions (Thanks to SueH) Added NoWait parameter to Execute-Process Added the ability for Deploy-Application.exe to point to a different .ps1 file by specifying it on the command-line Added checks to Deploy-Application.exe to verify the AppDeployToolkit folder exists Added PSAppDeployToolkit icon to Deploy-Application.exe Fixed issue where hang could occur if file version was null when using Get-FileVersion Improved exception handling and loggin...CS-Script Source: Release v3.8.1: Improved ConfigConsole AdvancedShell extensions support cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationProligence Orchard PowerShell: OrchardPs 0.2: Version 0.2, build 5273 Major Features: Support for Orchard 1.7 and 1.8 Support for managing Orchard themes Added new cmdlets: Get-OrchardFeature, Get-Tenant, Enable-Tenant, Disable-Tenant, Get-OrchardTheme, Enable-OrchardTheme Minor Features: Added 'gopc' alias for Get-OrchardPsCommand cmdlet Hidden 'Configuration' node in Orchard VFS, as it is not yet implemented Bug Fixes: Fixed signatures for *.ps1xml files 'FromAllTenants' switch no longer fails on tenants which are not running ...BugNET Issue Tracker: BugNET 1.6: Version 1.6 is a major upgrade to the latest frameworks and components by Microsoft. It includes a major UI overhaul using the bootstrap framework to have a modern, mobile friendly and easily customized layout. Upgrade to .NET 4.5 ASP.NET social auth Add script bundling and optimization Improvements for mobile devices Bootstrap (UI overhaul) Rewritten / friendly URL's Please read our release notes for BugNET 1.6: http://blog.bugnetproject.com/2014/06/08/bugnet-1-6-and-bugnet-pro-1...CppWindowsAPI: Library Build 20140608 [3.0]: There are many changes since the older versions before v3.0. Portable to the VS2013. Note that there is something still needed to implement so the relative components have been removed from this release, which will be re-implemented into the future releases. md5: 49bf91dbe4e47dee24d1f62a0b482334 sha-1: 4eabffc1b00557cdf8e83df18ac247e230f4c1d0 md5: 4a63a4923c23bcd821e7411453779086 sha-1: 1bb8549b92c8d791346cfe7efcdaeaa37098591d md5: 371026dfcac75e33f331430cf2c65415 sha-1: 7b8a155f30206f...SFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun EinstellbarLoad Runner - Distributed HTTP Pressure Test Tool: Load Runner 1.2: 1. added support for distributed load test (read documentation for details) 2. added detail documentationbabelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;MyBB: MyBB 1.6.13 Türkçe Kurulum Paketi: MyBB 1.6.13 - Resmi Tam Türkçe UTF-8 Sifir Kurulum Paketi Rar Pass - Sifresi: mybb.com.tr Yayinci site: http://www.mybb.com.tr Orjinal indirme adresi: http://download.mybb.com.tr Destek 1: http://destek.mybb.com.tr/showthread.php?tid=12326 Destek 2: http://tr.mybbdepo.com/mybb-1-6-13-turkce-sifir-kurulum-paketi-konusu.html Dosya: MyBB1613KurulumPaketiTR.rar MD5: d2745b79aa8cc5f8cc09e8a91b50d3cc SHA-1: 6fbb8e611e6d78f8cd3d88d7a773edc67ecc2a3e Ekleyen: XpSerkan MCTR TEAM - Gururla Sunar.SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.Fantom - Expression Based Dynamic Language Manager: Fantom Binary and Test Web Site: The first version of FantomDLL. Download binary and sample site for testing.Back Up Your SharePoint: SPSBackUP 0.1: Supports SharePoint 2010 and 2013 All settings with xml input file Clean backup history Notifications by mail Log script results in rtf fileNPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...Media Player (Technology Area): Media Player 0.3 (Codname Kalo): Themes are included, along with a picture viewer. This does not require 0.2 to be installedNew ProjectsAddress Auto lookup For MS CRM 2013: Address Lookup to find correct addresses in less time.Aspose for Spring.Java: Aspose for Spring Java provides source code and detailed usage instructions for extending the existing Spring.Java samples.Beatting Mole XNA Game on Windows Phone: The project game using XNA Game Engine in Windows PhoneBrecham.Obex: The library provides very broad OBEX support, providing not just the ‘Put’ operation , but also: Connect, Put, Get, SetPath, Delete, and Abort.Command Line Media Controller: This application provides a command line interface for issuing basic media controls to most media player applications.DevExpress Prism Adapters: DevExpress Prism Adapters is a project intented to provide different adapters for DevExpress controls integration with Microsoft Prism.FVSB: fvsbH Logger (8 logger): Create logs with a html format with a Visual Studio 2013 style.Masked Input For CRM 2013: Mask Input for more user friendliness and to avoid user typo errors.MovieDatabase: A movie database manipulation program that uses the movie database api.OpenNetworkTester: GUI-based bandwidth testing toolProgress Tracker: A simple pet project that allows users to set up daily tasks and track which ones they complete.ProjectShipping: summarySerXio: tfs, read tfs dataValu Akunting: Sistem Informasi Akuntansi Valudata KomputindoWindows Phone 8.1 Training for MIC15: Using for store training source code and resource url/files/.??????-??????【??】: ????????????????????,??????????,????????、????,??????????,??????????。??????-??????【??】: ??????????????????????????????,??????????,????,????,???,??????。??????-??????【??】: ????????????????,?????????????? ??。????????、????、????、?????????? ???????。????-????【??】: ??????,??????:?????,?????,??????,??????????,????????。????????!????-????【??】: ?????????????????????:????、????、??????????????,????????。????????!??????-??????【??】: ???????????,?????,???????????,???????,????,????,????,?????。??????-??????【??】: ????????????、???、??、??????????????????????????????,????????????????!????-????【??】: ???????????????????????????、????、????、???????????,????,????!?????-?????【??】: ???????????????8?，????????,????????,??????????,?????,????? ,????????!?????-?????【??】: ???????????????6?,???????????????????????????,??????????????,?????????！????-????【??】: ????????????????????????????,???????????????????????,???????。??????-??????【??】: ????????????????、??????、??????、??????、??????、?????、??????、????、????、????????！?????-?????【??】: ???????????????,????????,????:???????,??????,????,????,?????,?????,??????!?????-?????【??】: ????????????????,?????????????。?????????,???????,???????,?????????????。??????-??????【??】: ?????????????????,??????????????、???????、???????、???????、?????！??????-??????【??】: ????????????????????,????????????????,????????????????,??????！????-????【??】: ???????????????,?????????????。????????????,???????,???????,?????,?????。?????-?????【??】: ?????????????????????????,???????????,????????,?????????????????????。?????-?????【??】: ?????????????????????,????“???????,???????”?????,????????????！??????-??????【??】: ??????????????????????????,????,????,??????????。???????????????,??,??,??????????,??????...??????-??????【??】: ???????????????????,?????????????,????,?????????,?????????????,?????,?????!????-????【??】: ??????????????,?????????????? ??。????????、????、????、?????????? ???????。?????-?????【??】: ????????????????,???????????????。???????????,??????:????、????、???????！?????-?????【??】: ?????????????????,???????????,??????????????,??????????，??????????????！??????-??????【??】: ????????????,????,??????????? ???? ???? ?????????,???,??,?????!??????-??????【??】: ????????????????、????、????、??????、????、????????,????????、?????????,?????。????-????【??】: ????????????????:?????? ???? ??????,???????,??????,???????。?????-?????【??】: ????????????????,?????????????。????????????,???????,???????,?????,?????。?????-?????【??】: ?????????????????????????,???????????,????????,???????????????????????????-??????【??】: ???????????????????,?????????????,????,?????????,?????????????,?????,?????!??????-??????【??】: ?????????????????,???????????????。???????????,??????:????、????、???????！????-????【??】: ????????????????????????,????,????,??????????。???????????????,??,??,??????????,??????...?????-?????【??】: ?????????????????,???????????,??????????????,??????????，???????????????????-?????【??】: ?????????????????、?????、?????、????、?????,??????????。????????????????!??????-??????【??】: ????????????????????,????????????????,????????????????,??????！??????-??????【??】: ??????????????????????,????“???????,???????”?????,????????????！????-????【??】: ???????????????,??????????????、???????、???????、???????、?????！?????-?????【??】: ???????????????,????,????,??????,????“????、????、????、????”????????,??????.?????-?????【??】: ???????????????????,????????:??、??、???,?????????????????????!??????-??????【??】: ????????,??????:?????,?????,??????,??????????,????????。????????!??????-??????【??】: ???????????????????????:????、????、??????????????,????????。????????!??????-??????【??】: ?????????????????????????????,??????????,????,????,???,??????????-????【??】: ????????????????、????,??100%????,??????,????????????,???????????!????-????【??】: ??????????????????,??????????,????????、????,??????????,??????????。??????-??????【??】: ??????????????,????????,?????,???,???????????,???????????,?????,??????！??????-??????【??】: ??????????????????????????????????:???????,??????,????,????,????,?????！????-????【??】: ???????????????????，?????????/?,,???????????,??????????????!?????-?????【??】: ???????????????????????,????,????,????,???????,?????,?????.??????。?????-?????【??】: ???????????????、?????,????????????????????,????,????,??????。??????-??????【??】: ????????????????????,???????????????????????????,????:????,????,????,?????。?????-?????【??】: ???????????????????、????????、????????、????????、???????,????????????。?????-?????【??】: ????????????????,???????,??????。??????????,????,????,?????,????????????。???????-???????【??】: ??????????????????,??????,????,?????????????,????????,??????,????,?????...???????-???????【??】: ?????????????? , ???? ?????,??????????????,????,????,??????。?????-?????【??】: ???????????????????,??????????????,???????????,??????,????,??????,??????。??????-??????【??】: ????????????????,??????????????????????:???????,??????,????,????,????,????,????,???????！??????-??????【??】: ??????????????!???????????,??????,????,?????????????,????????,??????,????,?????...??????-??????【??】: ??????????????????、?????、?????、????、?????,??????????。????????????????!??????-??????【??】: ??????????????????????,????????,??????????,?????,????? ,????????!??????-??????【??】: ?????????????????,??????????、??????,??????????、????、????、???????。????-????【??】: ???????????、??????????????????,????????,?????,??????,????,????,????!?????-?????【??】: ?????????????????????,???????????????,???????,?????,?????,????? !!!?????-?????【??】: ?????????????????????,???????????????,????????????????????!???????-???????【??】: ????????????????????,??????????????????,?????????????。?????????,????????????。??????-??????【??】: ??????????????????,????,????,?????????.?????,?????!?????,?????????、??、??!??????-??????【??】: ???????????????????,?????????????,?????????????,??????,????,????,??????????！??????-??????【??】: ?????????????????,??????????、??????,??????????、????、????、???????。??????-??????【??】: ??????????????????????,???????????????,???????,?????,?????,????? !!!????-????【??】: ????????????????????,????????,??????????,?????,????? ,????????!?????-?????【??】: ?????????????????????,???????????????,????????????????????!?????-?????【??】: ?????????????????、????,??100%????,??????,????????????,???????????!??????-??????【??】: ??????????????????????????????,???????????????????????,???????。??????-??????【??】: ??????????????????:?????? ???? ??????,???????,??????,???????。????-????【??】: ????????????????、????、??????、????????,????????????,???????????！?????-?????【??】: ???????????,????,??????????? ???? ???? ?????????,???,??,?????!?????-?????【??】: ???????????????、????、????、??????、????、????????,????????、?????????,?????。??????-??????【??】: ?????????????:??????、????、????、????、????、??????、??????，???????!??????-??????【??】: ??????????????????,????,??.??.??.??.??.??.??.???，????，???????!????-????【??】: ??????????????，???????、???????????，????????、????、????、??????、????????。?????-?????【??】: ????????????????????????????，???????????????，????????、????、????、????、?????????，???????、???、???，??????????????????????，????????????、???????、??????????；???????????????-?????【??】: ???????????【.????.????.????.????.】??【??】:、??、??、??、??、??、??、??、??、??、??、???????????-??????【??】: ??????????????????、?????、?????、?????、?????、????,???????????,?????,??????！??????-??????【??】: ??????????????????,???、???!???????,????????????????,????????????,???!????-????【??】: ?????????????????????,????????????,?????、??、????,?????,???????????-?????【??】: ????????????????、????、????、??????????,???,?????,???????????????.?????-?????【??】: ????????????????????,?????????、??、??、????,??????????,?????????????！

Read the article

How employable am I as a programmer?

- by dsimcha

I'm currently a Ph.D. student in Biomedical Engineering with a concentration in computational biology and am starting to think about what I want to do after graduate school. I feel like I've accumulated a lot of programming skills while in grad school, but taken a very non-traditional path to learning all this stuff. I'm wondering whether I would have an easy time getting hired as a programmer and could fall back on that if I can't find a good job directly in my field, and if so whether I would qualify for a more prestigious position than "code monkey". Things I Have Going For Me Approximately 4 years of experience programming as part of my research. I believe I have a solid enough grasp of the fundamentals that I could pick up new languages and technologies pretty fast, and could demonstrate this in an interview. Good math and statistics skills. An extensive portfolio of open source work (and the knowledge that working on these projects implies): I wrote a statistics library in D, mostly from scratch. I wrote a parallelism library (parallel map, reduce, foreach, task parallelism, pipelining, etc.) that is currently in review for adoption by the D standard library. I wrote a 2D plotting library for D against the GTK Cairo backend. I currently use it for most of the figures I make for my research. I've contributed several major performance optimizations to the D garbage collector. (Most of these were low-hanging fruit, but it still shows my knowledge of low-level issues like memory management, pointers and bit twiddling.) I've contributed lots of miscellaneous bug fixes to the D standard library and could show the change logs to prove it. (This demonstrates my ability read other people's code.) Things I Have Going Against Me Most of my programming experience is in D and Python. I have very little to virtually no experience in the more established, "enterprise-y" languages like Java, C# and C++, though I have learned a decent amount about these languages from small, one-off projects and discussions about language design in the D community. In general I have absolutely no knowledge of "enterprise-y" technlogies. I've never used a framework before, possibly because most reusable code for scientific work and for D tends to call itself a "library" instead. I have virtually no formal computer science/software engineering training. Almost all of my knowledge comes from talking to programming geek friends, reading blogs, forums, StackOverflow, etc. I have zero professional experience with the official title of "developer", "software engineer", or something similar.

Read the article

Indefinite loops where the first time is different

- by George T

This isn't a serious problem or anything someone has asked me to do, just a seemingly simple thing that I came up with as a mental exercise but has stumped me and which I feel that I should know the answer to already. There may be a duplicate but I didn't manage to find one. Suppose that someone asked you to write a piece of code that asks the user to enter a number and, every time the number they entered is not zero, says "Error" and asks again. When they enter zero it stops. In other words, the code keeps asking for a number and repeats until zero is entered. In each iteration except the first one it also prints "Error". The simplest way I can think of to do that would be something like the folloing pseudocode: int number = 0; do { if(number != 0) { print("Error"); } print("Enter number"); number = getInput(); }while(number != 0); While that does what it's supposed to, I personally don't like that there's repeating code (you test number != 0 twice) -something that should generally be avoided. One way to avoid this would be something like this: int number = 0; while(true) { print("Enter number"); number = getInput(); if(number == 0) { break; } else { print("Error"); } } But what I don't like in this one is "while(true)", another thing to avoid. The only other way I can think of includes one more thing to avoid: labels and gotos: int number = 0; goto question; error: print("Error"); question: print("Enter number"); number = getInput(); if(number != 0) { goto error; } Another solution would be to have an extra variable to test whether you should say "Error" or not but this is wasted memory. Is there a way to do this without doing something that's generally thought of as a bad practice (repeating code, a theoretically endless loop or the use of goto)? I understand that something like this would never be complex enough that the first way would be a problem (you'd generally call a function to validate input) but I'm curious to know if there's a way I haven't thought of.

Read the article

Windows Phone 7 : Dragging and flicking UI controls

- by TechTwaddle

Who would want to flick and drag UI controls!? There might not be many use cases but I think some concepts here are worthy of a post. So we will create a simple silverlight application for windows phone 7, containing a canvas element on which we’ll place a button control and an image and then, as the title says, drag and flick the controls. Here’s Mainpage.xaml, <Grid x:Name="LayoutRoot" Background="Transparent"> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="*"/> </Grid.RowDefinitions>  <StackPanel x:Name="TitlePanel" Grid.Row="0" Margin="12,17,0,28"> <TextBlock x:Name="ApplicationTitle" Text="KINETICS" Style="{StaticResource PhoneTextNormalStyle}"/> <TextBlock x:Name="PageTitle" Text="drag and flick" Margin="9,-7,0,0" Style="{StaticResource PhoneTextTitle1Style}"/> </StackPanel>  <Grid x:Name="ContentPanel" Grid.Row="1" > <Canvas x:Name="MainCanvas" HorizontalAlignment="Stretch" VerticalAlignment="Stretch"> <Canvas.Background> <LinearGradientBrush StartPoint="0 0" EndPoint="0 1"> <GradientStop Offset="0" Color="Black"/> <GradientStop Offset="1.5" Color="BlanchedAlmond"/> </LinearGradientBrush> </Canvas.Background> </Canvas> </Grid> </Grid> the second row in the main grid contains a canvas element, MainCanvas, with its horizontal and vertical alignment set to stretch so that it occupies the entire grid. The canvas background is a linear gradient brush starting with Black and ending with BlanchedAlmond. We’ll add the button and image control to this canvas at run time. Moving to Mainpage.xaml.cs the Mainpage class contains the following members, public partial class MainPage : PhoneApplicationPage { Button FlickButton; Image FlickImage; FrameworkElement ElemToMove = null; double ElemVelX, ElemVelY; const double SPEED_FACTOR = 60; DispatcherTimer timer; FlickButton and FlickImage are the controls that we’ll add to the canvas. ElemToMove, ElemVelX and ElemVelY will be used by the timer callback to move the ui control. SPEED_FACTOR is used to scale the velocities of ui controls. Here’s the Mainpage constructor, // Constructor public MainPage() { InitializeComponent(); AddButtonToCanvas(); AddImageToCanvas(); timer = new DispatcherTimer(); timer.Interval = TimeSpan.FromMilliseconds(35); timer.Tick += new EventHandler(OnTimerTick); } We’ll look at those AddButton and AddImage functions in a moment. The constructor initializes a timer which fires every 35 milliseconds, this timer will be started after the flick gesture completes with some inertia. Back to AddButton and AddImage functions, void AddButtonToCanvas() { LinearGradientBrush brush; GradientStop stop1, stop2; Random rand = new Random(DateTime.Now.Millisecond); FlickButton = new Button(); FlickButton.Content = ""; FlickButton.Width = 100; FlickButton.Height = 100; brush = new LinearGradientBrush(); brush.StartPoint = new Point(0, 0); brush.EndPoint = new Point(0, 1); stop1 = new GradientStop(); stop1.Offset = 0; stop1.Color = Colors.White; stop2 = new GradientStop(); stop2.Offset = 1; stop2.Color = (Application.Current.Resources["PhoneAccentBrush"] as SolidColorBrush).Color; brush.GradientStops.Add(stop1); brush.GradientStops.Add(stop2); FlickButton.Background = brush; Canvas.SetTop(FlickButton, rand.Next(0, 400)); Canvas.SetLeft(FlickButton, rand.Next(0, 200)); MainCanvas.Children.Add(FlickButton); //subscribe to events FlickButton.ManipulationDelta += new EventHandler<ManipulationDeltaEventArgs>(OnManipulationDelta); FlickButton.ManipulationCompleted += new EventHandler<ManipulationCompletedEventArgs>(OnManipulationCompleted); } this function is basically glorifying a simple task. After creating the button and setting its height and width, its background is set to a linear gradient brush. The direction of the gradient is from top towards bottom and notice that the second stop color is the PhoneAccentColor, which changes along with the theme of the device. The line, stop2.Color = (Application.Current.Resources["PhoneAccentBrush"] as SolidColorBrush).Color; does the magic of extracting the PhoneAccentBrush from application’s resources, getting its color and assigning it to the gradient stop. AddImage function is straight forward in comparison, void AddImageToCanvas() { Random rand = new Random(DateTime.Now.Millisecond); FlickImage = new Image(); FlickImage.Source = new BitmapImage(new Uri("/images/Marble.png", UriKind.Relative)); Canvas.SetTop(FlickImage, rand.Next(0, 400)); Canvas.SetLeft(FlickImage, rand.Next(0, 200)); MainCanvas.Children.Add(FlickImage); //subscribe to events FlickImage.ManipulationDelta += new EventHandler<ManipulationDeltaEventArgs>(OnManipulationDelta); FlickImage.ManipulationCompleted += new EventHandler<ManipulationCompletedEventArgs>(OnManipulationCompleted); } The ManipulationDelta and ManipulationCompleted handlers are same for both the button and the image. OnManipulationDelta() should look familiar, a similar implementation was used in the previous post, void OnManipulationDelta(object sender, ManipulationDeltaEventArgs args) { FrameworkElement Elem = sender as FrameworkElement; double Left = Canvas.GetLeft(Elem); double Top = Canvas.GetTop(Elem); Left += args.DeltaManipulation.Translation.X; Top += args.DeltaManipulation.Translation.Y; //check for bounds if (Left < 0) { Left = 0; } else if (Left > (MainCanvas.ActualWidth - Elem.ActualWidth)) { Left = MainCanvas.ActualWidth - Elem.ActualWidth; } if (Top < 0) { Top = 0; } else if (Top > (MainCanvas.ActualHeight - Elem.ActualHeight)) { Top = MainCanvas.ActualHeight - Elem.ActualHeight; } Canvas.SetLeft(Elem, Left); Canvas.SetTop(Elem, Top); } all it does is calculate the control’s position, check for bounds and then set the top and left of the control. OnManipulationCompleted() is more interesting because here we need to check if the gesture completed with any inertia and if it did, start the timer and continue to move the ui control until it comes to a halt slowly, void OnManipulationCompleted(object sender, ManipulationCompletedEventArgs args) { FrameworkElement Elem = sender as FrameworkElement; if (args.IsInertial) { ElemToMove = Elem; Debug.WriteLine("Linear VelX:{0:0.00} VelY:{1:0.00}", args.FinalVelocities.LinearVelocity.X, args.FinalVelocities.LinearVelocity.Y); ElemVelX = args.FinalVelocities.LinearVelocity.X / SPEED_FACTOR; ElemVelY = args.FinalVelocities.LinearVelocity.Y / SPEED_FACTOR; timer.Start(); } } ManipulationCompletedEventArgs contains a member, IsInertial, which is set to true if the manipulation was completed with some inertia. args.FinalVelocities.LinearVelocity.X and .Y will contain the velocities along the X and Y axis. We need to scale down these values so they can be used to increment the ui control’s position sensibly. A reference to the ui control is stored in ElemToMove and the velocities are stored as well, these will be used in the timer callback to access the ui control. And finally, we start the timer. The timer callback function is as follows, void OnTimerTick(object sender, EventArgs e) { if (null != ElemToMove) { double Left, Top; Left = Canvas.GetLeft(ElemToMove); Top = Canvas.GetTop(ElemToMove); Left += ElemVelX; Top += ElemVelY; //check for bounds if (Left < 0) { Left = 0; ElemVelX *= -1; } else if (Left > (MainCanvas.ActualWidth - ElemToMove.ActualWidth)) { Left = MainCanvas.ActualWidth - ElemToMove.ActualWidth; ElemVelX *= -1; } if (Top < 0) { Top = 0; ElemVelY *= -1; } else if (Top > (MainCanvas.ActualHeight - ElemToMove.ActualHeight)) { Top = MainCanvas.ActualHeight - ElemToMove.ActualHeight; ElemVelY *= -1; } Canvas.SetLeft(ElemToMove, Left); Canvas.SetTop(ElemToMove, Top); //reduce x,y velocities gradually ElemVelX *= 0.9; ElemVelY *= 0.9; //when velocities become too low, break if (Math.Abs(ElemVelX) < 1.0 && Math.Abs(ElemVelY) < 1.0) { timer.Stop(); ElemToMove = null; } } } if ElemToMove is not null, we get the top and left values of the control and increment the values with their X and Y velocities. Check for bounds, and if the control goes out of bounds we reverse its velocity. Towards the end, the velocities are reduced by 10% every time the timer callback is called, and if the velocities reach too low values the timer is stopped and ElemToMove is made null. Here’s a short video of the program, the video is a little dodgy because my display driver refuses to run the animations smoothly. The flicks aren’t always recognised but the program should run well on an actual device (or a pc with better configuration), You can download the source code from here: ButtonDragAndFlick.zip

Read the article

eSTEP Newsletter for October 2013 now available

- by uwes

Dear Partners,We would like to let you know that the October'13 issue of our Newsletter is now available.The issue contains information on the following topics: Oracle Open World Summary Oracle Cloud: Oracle Engineered Systems Oracle Database and Middleware Oracle Applications and Software as a Service Oracle Industries Oracle Partners and the "Internet of Things" JavaOne News MySQL News Corporate News Create Your HR Strategic Vision at Oracle HCM World Oracle Database Protection Redefined A Preview: Oracle Database Backup Logging Recovery Appliance Oracle closed Tekelec acquisition Congratulations to ORACLE TEAM USA! Tech sectionARC M6 Oracle's SPARC M6 Oracle SuperCluster M6-32 - Oracle’s Most Scalable Engineered System Oracle Multitenant on SPARC Servers and Oracle Solaris Oracle Database 12c Enterprise Edition: Plug into the Cloud Oracle In-Memory Database Cache Oracle Virtual Compute Appliance New Benchmark-Results published (Sept. 2013) Video Interview: Elasticity, the Biggest Challenge Facing Data Centers Today Tech blog Announcing New Sun Storage 2500-M2 Drives SPARC Product Line Update ZFS RAID Calculator v6 What ships with ODA X3-2? Tech Article: Oracle Multitenant on SPARC Servers and Oracle Solaris New release of Sun Rack II capacity calculator available Announcing: Oracle Solaris Cluster Product Bulletin, September 2013 Learning & events Planned TechCasts Quarterly Partner Update Live Webcast: Simplify and Accelerate Oracle Database deployment with Oracle VM Templates Join us for OTN's Virtual Developer Day - Harnessing the Power of Oracle WebLogic and Oracle Coherence.Learn from OOW 2013 what is going on in Virtualization How to Implementing Early Arriving Facts in ODI, Part I and Part II: Proof of Concept Overview Multi-Factor Authentication in Oracle WebLogic Using multi-factor authentication to protect web applications deployed on Oracle WebLogic. If Virtualization Is Free, It Can't Be Any Good—Right? Looking beyond System/HW SOA and User Interfaces Overcoming the challenges to developing user interfaces in a service oriented References Vodafone Romania Improves Business Agility and Customer Satisfaction, with 10x Faster Business Intelligence Delivery and 12x Faster Processing Emirates Integrated Telecommunications Captures 47% Market Share in a Competitive Market, Thanks to 24/7 Availability Home Credit and Finance Bank Accelerates Getting New Banking Products to Market Extra A Conversation with Java Champion Johan VosYou can find the Newsletter on our portal under eSTEP News ---> Latest Newsletter. You will need to provide your email address and the pin below to get access. Link to the portal is shown below.URL: http://launch.oracle.com/PIN: eSTEP_2011Previous published Newsletters can be found under the Archived Newsletters section and more useful information under the Events, Download and Links tab. Feel free to explore and any feedback is appreciated to help us improve the service and information we deliver.Thanks and best regards,Partner HW Enablement EMEA

Read the article

Unable to configure/setup 5.1 audio with 12.04

- by Vipin Vinayan

I am kinda new to Ubuntu as well. I have been having this issue with audio for quite sometime now. Initially, when I installed version 11.10 (I guess), I was able to use my 5.1 speakers without any issues. If my memory serves me right, it was after an update that the 5.1 audio stopped working and the video resolution would not get saved. I temporarily fixed the resolution issue by creating a start-up shell script that would update the resolution and load it. But the issue with audio has been going on for quite sometime now. Even though I have option for 5.1, only two speakers seem to be working. I thought an upgrade should fix the issue and so upgraded the OS to version 12.04. I also tried uninstalling alsa and pulse audio, reinstalling them, changing the /etc/pulse/daemon.conf channels from 2 to 6. I have also tried installing pavucontrol but nothing seems to have worked and the issue still persists. Is there anything else you could suggest? The lspci log on my computer is as follows 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Would really appreciate a response that will assist me in resolving my issue. Thanks in advance Vipin

Read the article

No wireless connection using a conceptronic c54i (RT2561/RT61 rev B)

- by jrosell

Detected but not working. New install on ubuntu 11.10 using coneptronic C54Ri. As documentation says it uses Ralink drivers.... Any ideas why my wireless does not work? $ lspci -nn | grep -i 'ralink' 01:05.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:90:e5:af:13 inet addr:192.168.0.197 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21e:90ff:fee5:af13/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28361 errors:0 dropped:0 overruns:0 frame:0 TX packets:16858 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39812172 (39.8 MB) TX bytes:1633405 (1.6 MB) Interrupt:43 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6608 (6.6 KB) TX bytes:6608 (6.6 KB) iwconfig wlan0 wlan0 IEEE 802.11abg ESSIDff/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff lsmod | grep rt rt61pci 27493 0 crc_itu_t 12627 1 rt61pci rt2x00pci 14202 1 rt61pci rt2x00lib 48114 2 rt61pci,rt2x00pci mac80211 272785 2 rt2x00pci,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 eeprom_93cx6 12653 1 rt61pci parport_pc 32114 1 parport 40930 3 ppdev,parport_pc,lp lsmod | grep rt [ 2497.816989] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.827112] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.837430] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847528] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847632] phy0 -> rt61pci_wait_bbp_ready: Error - BBP register access faile d, aborting. [ 2497.847637] phy0 -> rt61pci_set_device_state: Error - Device failed to enter state 4 (-5). sudo lshw -C network *-network DISABLED description: Wireless interface product: RT2561/RT61 rev B 802.11g vendor: Ralink corp. physical id: 5 bus info: pci@0000:01:05.0 logical name: wlan0 version: 00 serial: fa:b8:14:58:62:35 width: 32 bits clock: 33MHz capabilities: pm cap_list ethernet physical wireless configuration: broadcast=yes driver=rt61pci driverversion=3.0.0-12-generic firmware=0.8 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:fdef8000-fdefffff iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Failed to read scan data : Network is down uname -mr 3.0.0-12-generic i686 Edit 1 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no On reboot, sudo lshw -C network returns network is ok. Hovever, WPA keeps on asking the wireless key

Read the article

How to troubleshoot ethernet port on laptop

- by Psallas Vassilios

I have a problem with my wired connection. To be more specific, my laptop doesn't seems to recognize that I have plugged in an ethernet cable. I tried to download new drivers for my ethernet card, but I couldn't find any solutions. Maybe because I am new to Linux, so I'm not familiar with running commands in the terminal. OK I have typed the command and here are the results: 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02) For the second reply I don't know if the following is what you asked me: ?Memory: 3.9 GiB ?Processor: Intel Core 2 Duo CPU P8800 @ 2.66GHz × 2 ?OS type: 32-bit My Ethernet connection had some problem on Windows too. I have changed recently my internet provider, and since then my ethernet cable is not recognized by the laptop. At that time I was still on Windows. I thought that with Ubuntu the problem would be solved, but unfortunately the problem still persists. If someone can help me to solve my problem I'll be thankful. Here are the results of the three first commands you told me to run: lsmod | grep sis190 sis190 22570 0 sudo modprobe sis190 ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:90:81:7e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:185 errors:0 dropped:0 overruns:0 frame:0 TX packets:185 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22672 (22.6 KB) TX bytes:22672 (22.6 KB) wlan0 Link encap:Ethernet HWaddr 00:25:d3:2c:3a:ae inet addr:192.168.1.72 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe2c:3aae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:260 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:71992 (71.9 KB) TX bytes:52000 (52.0 KB) and the results of running the last two commands: dmesg | grep -e eth -e sis190 [ 0.816667] sis190: sis190 Gigabit Ethernet driver 1.4 loaded [ 0.816728] sis190 0000:00:04.0: setting latency timer to 64 [ 0.816751] sis190: 0000:00:04.0: Read MAC address from EEPROM [ 0.904032] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address [ 1.416030] sis190: 0000:00:04.0: Using transceiver at address 1 as default [ 1.448235] sis190 0000:00:04.0: eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8410000 (IRQ: 19), 00:90:f5:90:81:7e [ 1.448238] sis190 0000:00:04.0: eth0: GMII mode. [ 1.448243] sis190 0000:00:04.0: eth0: Enabling Auto-negotiation [ 11.560907] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372019] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.424038] sis190 0000:00:04.0: eth0: auto-negotiating... nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: sis190 State: unavailable Default: no HW Address: 00:90:F5:90:81:7E Capabilities: Carrier Detect: yes Wired Properties Carrier: off

Read the article

Behaviour Trees with irregular updates

- by Robominister

I'm interested in behaviour trees that aren't iterated every game tick, but every so often. (Edit: the tree could specify how many frames within the main game loop to wait before running its tick function again). Every theoretical implementation I have seen of behaviour trees talks of the tree search being carried out every game update - which seems necessary, because a leaf node (eg a behaviour, like 'return to base') needs to be constantly checked to see if is still running, failed or completed. Can anyone suggest how I might start implementing a tree that isnt run every tick, or point me in the direction of good material specific to this case (I am struggling to find anything)? My thoughts so far: action leaf nodes (when they start) must only push some kind of action object onto a list for an entity, rather than directly calling any code that makes the entity do something. The list of actions for the entity would be run every frame (update any that need to run, pop any that have completed from the list). the return state from a given action must be fed back into the tree, so that when we run the tree iteration again (and reach the same action leaf node - so the tree has so far determined that we ought to still be trying this action) - that the action has completed, or is still running etc. If my actual action code is running from an action list on an entity, then I possibly need to cancel previously running actions in the list - i am thinking that I can just delete the entire stack of queued up actions. I've seen the idea of ActionLists which block lower priority actions when a higher priority one is added, but this seems like very close logic to behaviour trees, and I dont want to be duplicating behaviour. This leaves me with some questions 1) How would I feed the action return state back into the tree? Its obvious I need to store some information relating to 'currently executing actions' on the entity, and check that in the tree tick, but I can't imagine how. 2) Does having a seperate behaviour tree (for deciding behaviour) and action list (for carrying out actual queued up actions) sound like a reasonable approach? 3) Is the approach of updating a behaviour tree irregularly actually used by anyone? It seems like a nice idea for budgeting ai search time when you have a lot of ai entities to process. (Edit) - I am also thinking about storing a single instance of a given behaviour tree in memory, and providing it by reference to any entity that uses it. So any information about what action was last selected for execution on an entity must be stored in a data context relative to the entity (which the tree can check). (I am probably answering my own questions as i go!) I hope I have expressed my questions adequately! Thanks in advance for any help :)

Read the article

ArchBeat Link-o-Rama for 2012-10-12

- by Bob Rhubart

This is your brain on IT architecture. Oracle Technology Network Architect Day in Los Angeles, Oct 25 This is your brain on IT architecture. Stuff your cranium with architecture by attending Oracle Technology Network Architect Day in Los Angeles, October 25, 2012, at the Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048. Technical sessions, panel Q&A, and peer roundtables--plus a free lunch. Register now. WebCenter Sites Gadget Development Concepts Quickstart | John Brunswick What are Gadgets? "At their most basic level they can be thought of as lightweight portlets that run largely on the client side of an architecture," says John Brunswick. "Gadgets provide a cross-platform container to run reusable UI modules that generally expose dynamic information to an end user, allowing for some level of end user customization." ORCLville: OOW 2012 - A Not So Brief Recap Oracle ACE Director Floyd Teter, an Applications & Apps Technology specialists, shares his personal, frank, and and extensive recap or Oracle OpenWorld 2012. Fusion Applications Technical Tips | Naveen Nahata "Setting memory parameters for Admin and Managed servers of various domains in Fusion Applications can be, let us say, a little daunting," says Oracle Fusion Middleware A-Team member Naveen Nahata. "While all this may look complicated and intimidating, it is actually relatively simple once you understand how it all works." Following the Thread in OSB | Antony Reynolds Antony Reynolds recently led an Oracle Service Bus POC in which his team needed to get high throughput from an OSB pipeline. "Imagine our surprise when, on stressing the system, we saw it lock up, with large numbers of blocked threads." He shares the details of the problem and the solution in this extensive technical post. ExaLogic Hackers Night - November 19th Nürnberg Germany | WebLogic Partner Community EMEA Want to get your hands on Oracle Exalogic? Make your way to Nürnberg, Germany for this Exalogic Hacker's Night on November 19, 2012. Experts will be on hand to help you test your ideas. (The blog post is in English, but the event registration page is in German.) Thought for the Day "A foolish consistency is the hobgoblin of little minds…" — Ralph Waldo Emerson (May 25, 1803 – April 27, 1882) Source: SoftwareQuotes.com

Read the article

Various problems with software raid1 array built with Samsung 840 Pro SSDs

- by Andy B

I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

Read the article

Fail to start windows after Ubuntu 11.10 install

- by user49995

Computer: HP Pavilion dv7-6140eo OS: Originally Win7 I recently decided to try out Ubuntu, and I decided to dual-boot it with Windows 7. First I googled some how-to's, then I downloaded Ubuntu onto a memory stick and made a second partition (I originally only had one partition that I shrunk and used the unallocated space to install onto during the Ubuntu install). During the install I set format type to xt4 (or something, it was the default option), chose the "in the beginning" option and set the last option as "\". The install was successful. Although, when I restarted my computer I weren't able to choose which operating system to start; it went right into windows. After showing the windows logo for half a second before rebooting, I get a blue screen (see bottom of the page). Trying to fix it, I deleted the newly made partition I had just installed Ubuntu onto (seeing it wasn't working either). This made no difference. I proceeded with installing Ubuntu again, so I would at least have a functioning computer, and now Ubuntu works fine (on it now). The only difference on start-up is that I get a Grub window asking me to between several options including Linux and Windows 7 (loader). Now, if I choose Windows 7, I get the message "Windows was unable to start. A recent software or hardware change might be the cause". It recommends me to choose the first option of the two it provides; to start start-up repair tool. The second option being starting windows normally. If I start windows normally, the same thing happens as earlier. My computer does not have a windows installation CD. Although, it has (at least it used to, if I haven't screwed that too up) a 17gb recovery partition. In addition I made an image of the computer onto a external hard drive when I first got it. Though, I have no idea how to use either. If anyone has any idea how I can make windows work again or reinstall it (already backed up my files) it would be greatly appreciated. I still prefer to dual boot between the two functioning operating systems, but I will settle for a functioning windows 7. Thanks a lot for any replies. Blue screen: A problem has been detected and Windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check for viruses on your computer. Remove and newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configures and terminated. Run CMKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: **STOP: 0x0000007B (0xFFFFF880009A97E8,0xFFFFFFFFC0000034, 0x0000000000000000,0x0000000000000000

Read the article

Software Tuned to Humanity

- by Phil Factor

I learned a great deal from a cynical old programmer who once told me that the ideal length of time for a compiler to do its work was the same time it took to roll a cigarette. For development work, this is oh so true. After intently looking at the editing window for an hour or so, it was a relief to look up, stretch, focus the eyes on something else, and roll the possibly-metaphorical cigarette. This was software tuned to humanity. Likewise, a user’s perception of the “ideal” time that an application will take to move from frame to frame, to retrieve information, or to process their input has remained remarkably static for about thirty years, at around 200 ms. Anything else appears, and always has, to be either fast or slow. This could explain why commercial applications, unlike games, simulations and communications, aren’t noticeably faster now than they were when I started programming in the Seventies. Sure, they do a great deal more, but the SLAs that I negotiated in the 1980s for application performance are very similar to what they are nowadays. To prove to myself that this wasn’t just some rose-tinted misperception on my part, I cranked up a Z80-based Jonos CP/M machine (1985) in the roof-space. Within 20 seconds from cold, it had loaded Wordstar and I was ready to write. OK, I got it wrong: some things were faster 30 years ago. Sure, I’d now have had all sorts of animations, wizzy graphics, and other comforting features, but it seems a pity that we have used all that extra CPU and memory to increase the scope of what we develop, and the graphical prettiness, but not to speed the processes needed to complete a business procedure. Never mind the weight, the response time’s great! To achieve 200 ms response times on a Z80, or similar, performance considerations influenced everything one did as a developer. If it meant writing an entire application in assembly code, applying every smart algorithm, and shortcut imaginable to get the application to perform to spec, then so be it. As a result, I’m a dyed-in-the-wool performance freak and find it difficult to change my habits. Conversely, many developers now seem to feel quite differently. While all will acknowledge that performance is important, it’s no longer the virtue is once was, and other factors such as user-experience now take precedence. Am I wrong? If not, then perhaps we need a new school of development technique to rival Agile, dedicated once again to producing applications that smoke the rear wheels rather than pootle elegantly to the shops; that forgo skeuomorphism, cute animation, or architectural elegance in favor of the smell of hot rubber. I struggle to name an application I use that is truly notable for its blistering performance, and would dearly love one to do my everyday work – just as long as it doesn’t go faster than my brain.

Read the article

Can I get a C++ Compiler to instantiate objects at compile time

- by gam3

I am writing some code that has a very large number of reasonably simple objects and I would like them the be created at compile time. I would think that a compiler would be able to do this, but I have not been able to figure out how. In C I could do the the following: #include <stdio.h> typedef struct data_s { int a; int b; char *c; } info; info list[] = { 1, 2, "a", 3, 4, "b", }; main() { int i; for (i = 0; i < sizeof(list)/sizeof(*list); i++) { printf("%d %s\n", i, list[i].c); } } Using #C++* each object has it constructor called rather than just being layed out in memory. #include <iostream> using std::cout; using std::endl; class Info { const int a; const int b; const char *c; public: Info(const int, const int, const char *); const int get_a() { return a; }; const int get_b() { return b; }; const char *get_c() const { return c; }; }; Info::Info(const int a, const int b, const char *c) : a(a), b(b), c(c) {}; Info list[] = { Info(1, 2, "a"), Info(3, 4, "b"), }; main() { for (int i = 0; i < sizeof(list)/sizeof(*list); i++) { cout << i << " " << list[i].get_c() << endl; } } I just don't see what information is not available for the compiler to completely instantiate these objects at compile time, so I assume I am missing something.

Read the article

5.1 surround sound

- by rocker9455

Ok, So i've always had trouble with enabling 5.1 in ubuntu. Running 'alsamixer': I have: Master, Heaphones, PCM, Front, Front Mi, Front Mi, Surround, Center All are at 100% Card:HDA Intel Chip:Realtek ALC888 (This is my onboard sound, Its a dell studio, with 7.1 integrated sound) Running "speaker-test -c6 -twav" I only get the front 2 speakers (Right/Left) making any noise. The others make no noise at all. I have no other sound card to use as all my PCI slots are used up. Daemon.conf: ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10

Read the article

C Minishell Command Expansion Printing Gibberish

- by Optimus_Pwn

I'm writing a unix minishell in C, and am at the point where I'm adding command expansion. What I mean by this is that I can nest commands in other commands, for example: $> echo hello $(echo world! ... $(echo and stuff)) hello world! ... and stuff I think I have it working mostly, however it isn't marking the end of the expanded string correctly, for example if I do: $> echo a $(echo b $(echo c)) a b c $> echo d $(echo e) d e c See it prints the c, even though I didn't ask it to. Here is my code: msh.c - http://pastebin.com/sd6DZYwB expand.c - http://pastebin.com/uLqvFGPw I have a more code, but there's a lot of it, and these are the parts that I'm having trouble with at the moment. I'll try to tell you the basic way I'm doing this. Main is in msh.c, here it gets a line of input from either the commandline or a shellfile, and then calls processline (char *line, int outFD, int waitFlag), where line is the line we just got, outFD is the file descriptor of the output file, and waitFlag tells us whether or not we should wait if we fork. When we call this from main we do it like this: processline (buffer, 1, 1); In processline, we allocate a new line: char expanded_line[EXPANDEDLEN]; We then call expand, in expand.c: expand(line, expanded_line, EXPANDEDLEN); In expand, we copy the characters literally from line to expanded_line until we find a $(, which then calls: static int expCmdOutput(char *orig, char *new, int *oldl_ind, int *newl_ind) orig is line, and new is expanded line. oldl_ind and newl_ind are the current positions in the line and expanded line, respectively. Then we pipe, and recursively call processline, passing it the nested command(for example, if we had "echo a $(echo b)", we would pass processline "echo b"). This is where I get confused, each time expand is called, is it allocating a new chunk of memory EXPANDEDLEN long? If so, this is bad because I'll run out of stack room really quickly(in the case of a hugely nested commandline input). In expand I insert a null character at the end of the expanded string, so why is it printing past it? If you guys need any more code, or explanations, just ask. Secondly, I put the code in pastebin because there's a ton of it, and in my experience people don't like it when I fill up several pages with code. Thanks.

Read the article

What is the best way to implement collision detection using Bullet physics engine and a track generated from a curve?

- by tigrou

I am developing a small racing game were the track is generated from a curve. As said above, the track is generated, but not infinite. The track of one level could fit with no problem in memory and will contain a reasonably small amount of triangles. For collisions, I would like to use Bullet physics engine and know what is the best way to handle collisions with the track efficiently. NOTE : The track will be stored as a static rigid body (mass = 0). The player will be represented by a sphere shape for collisions. Here is some possibilities i have in mind : Create one rigid body, then, put all triangles of the track (except non collidable stuff) into it. Result : 1 body with many triangles (eg : 30000 triangles) Split the track into several sections (eg: 10 sections). Then, for each section, create a rigid body and put corresponding triangles in it. Result : small amount of bodies with relatively small amount of triangles (eg : 1500 triangles per section). Split the track into many sub-sections (eg : 1200 sections). Here one subsection = very small step when generating the curve. Again for each sub-section, create a body and put triangles in it. Result : many bodies with very small amount of triangles (eg : 20 triangles). Advantage : it could be possible to "extra data" to each of the subsection, that could be used when handling collisions. Same as 2, but only put sections N and N+1 in physics engine (where N = current section where the player is). When player reach section N+1, unload section N and load section N+2 and so on... Issue : harder to implement, problems if the player suddenly "jump" from one section to another (eg : player fly away from section N, and fall on section N + 4 that was underneath : no collision handled, player will fall into void ) Same as 4, but with many sub-sections. Issues : since subsections are very small there will be constantly new bodies added and removed to physics engine at runtime. Possibilities for player to accidently skip some sections and fall into the void are higher than 4.

Read the article

eSTEP Newsletter for October 2013 Now Available

- by Cinzia Mascanzoni

The October'13 issue of our Newsletter is now available. The issue contains information on the following topics: Oracle Open World Summary Oracle Cloud: Oracle Engineered Systems Oracle Database and Middleware Oracle Applications and Software as a Service Oracle Industries Oracle Partners and the "Internet of Things" JavaOne News MySQL News Corporate News Create Your HR Strategic Vision at Oracle HCM World Oracle Database Protection Redefined A Preview: Oracle Database Backup Logging Recovery Appliance Oracle closed Tekelec acquisition Congratulations to ORACLE TEAM USA! Tech sectionARC M6 Oracle's SPARC M6 Oracle SuperCluster M6-32 - Oracle’s Most Scalable Engineered System Oracle Multitenant on SPARC Servers and Oracle Solaris Oracle Database 12c Enterprise Edition: Plug into the Cloud Oracle In-Memory Database Cache Oracle Virtual Compute Appliance New Benchmark-Results published (Sept. 2013) Video Interview: Elasticity, the Biggest Challenge Facing Data Centers Today Tech blog Announcing New Sun Storage 2500-M2 Drives SPARC Product Line Update ZFS RAID Calculator v6 What ships with ODA X3-2? Tech Article: Oracle Multitenant on SPARC Servers and Oracle Solaris New release of Sun Rack II capacity calculator available Announcing: Oracle Solaris Cluster Product Bulletin, September 2013 Learning & events Planned TechCasts Quarterly Partner Update Live Webcast: Simplify and Accelerate Oracle Database deployment with Oracle VM Templates Join us for OTN's Virtual Developer Day - Harnessing the Power of Oracle WebLogic and Oracle Coherence. Learn from OOW 2013 what is going on in Virtualization How to Implementing Early Arriving Facts in ODI, Part I and Part II: Proof of Concept Overview Multi-Factor Authentication in Oracle WebLogic Using multi-factor authentication to protect web applications deployed on Oracle WebLogic. If Virtualization Is Free, It Can't Be Any Good—Right? Looking beyond System/HW SOA and User Interfaces Overcoming the challenges to developing user interfaces in a service oriented References Vodafone Romania Improves Business Agility and Customer Satisfaction, with 10x Faster Business Intelligence Delivery and 12x Faster Processing Emirates Integrated Telecommunications Captures 47% Market Share in a Competitive Market, Thanks to 24/7 Availability Home Credit and Finance Bank Accelerates Getting New Banking Products to Market Extra A Conversation with Java Champion Johan Vos You can find the Newsletter on our portal under eSTEP News ---> Latest Newsletter. You will need to provide your email address and the pin below to get access. Link to the portal is shown below. URL: http://launch.oracle.com/ PIN: eSTEP_2011 Previous published Newsletters can be found under the Archived Newsletters section and more useful information under the Events, Download and Links tab.

Read the article

Anticipating JavaOne 2012 – Number 17!

- by Janice J. Heiss

As I write this, JavaOne 2012 (September 30-October 4 in San Francisco, CA) is just over a week away -- the seventeenth JavaOne! I’ll resist the impulse to travel in memory back to the early days of JavaOne. But I will say that JavaOne is a little like your birthday or New Year’s in that it invites reflection, evaluation, and comparison. It’s a time when we take the temperature of Java and assess the world of information technology generally. At JavaOne, insight and information flow amongst Java developers like no other time of the year.This year, the status of Java seems more secure in the eyes of most Java developers who agree that Oracle is doing an acceptable job of stewarding the platform, and while the story is still in progress, few doubt that Oracle is engaging strongly with the Java community and wants to see Java thrive. From my perspective, the biggest news about Java is the growth of some 250 alternative languages for the JVM – from Groovy to Jython to JRuby to Scala to Clojure and on and on – offering both new opportunities and challenges. The JVM has proven itself to be unusually flexible, resulting in an embarrassment of riches in which, more and more, developers are challenged to find ways to optimally mix together several different languages on projects. To the matter at hand -- I can say with confidence that Oracle is working hard to make each JavaOne better than the last – more interesting, more stimulating, more networking, and more fun! A great deal of thought and attention is being devoted to the task. To free up time for the 475 technical sessions/Birds of feather/Hands-on-Labs slots, the Java Strategy, Partner, and Technical keynotes will be held on Sunday September 30, beginning at 4:00 p.m. Let’s not forget Java Embedded@JavaOne which is being held Wednesday, Oct. 3rd and Thursday, Oct. 4th at the Hotel Nikko. It will provide business decision makers, technical leaders, and ecosystem partners important information about Java Embedded technologies and new business opportunities. This year's JavaOne theme is “Make the Future Java”. So come to JavaOne and make your future better by:--Choosing from 475 sessions given by the experts to improve your working knowledge and coding expertise --Networking with fellow developers in both casual and formal settings--Enjoying world-class entertainment--Delighting in one of the world’s great cities (my home town) Hope to see you there! Originally published on blogs.oracle.com/javaone.

Read the article

Setting MTU on Exalogic

- by csoto

For many reasons, a system administrator may want to change the MTU settings of a server. But in a system like Exalogic which contains lots of interconnected nodes and other various components, it's important to understand how this applies to the different networks. For example, when bringing up bonding of InfiniBand an error like the following may be thrown: Bringing up interface bond1: SIOCSIFMTU: Invalid argument Both scripts ifcfg-ib0 and ifcfg-ib1 (from the /etc/sysconfig/network-scripts/ direectory) have MTU set to 65500, which is a valid MTU value only if all IPoIB slaves operate in connected mode and are configured with the same value, so the line below must be added to both network scripts and then restart the network: CONNECTED_MODE=yes By the way, an error of the form “SIOCSIFMTU: Invalid argument” indicates that the requested MTU was rejected by the kernel. Typically this would be due to it exceeding the maximum value supported by the interface hardware. In that case you must either reduce the MTU to a value that is supported or obtain more capable hardware. This problem has been seen when trying to modify the MTU using the ifconfig command, like the output of the example below: [root@elxxcnxx ~]# ifconfig ib1 mtu 65520 SIOCSIFMTU: Invalid argument It's important to insist that in most cases the nodes must be rebooted after the MTU size has been changed. Although in some circumstances it may work without a reboot, it is not how it is typically documented. Now, in order to achieve a reduced memory consumption and improve performance for network traffic received on IPoIB related interfaces, it is recommend to reduce the MTU value in interface configuration files for IPoIB related bonds from 65520 to 64000. The change needs to be made to interface configuration files under the /etc/sysconfig/network-scripts directory and applies to the interface configuration files for bonds over IPoIB related slave devices, for example /etc/sysconfig/network-scripts/ifcfg-bond1. However, keep in mind that the numeric portion of the interface filenames that corresponding to IPoIB interfaces is expected to vary across compute nodes and vServers and so cannot be relied upon to identify which interface files are for bonds are over IPoIB rather than EoIB related slave interfaces. To fix these MTU values to the recommended settings, there are very useful instructions and a script on the MOS Note 1624434.1, and it's applicable physical and virtual configurations of Exalogic. Regarding the recommended MTU value for EoIB related interfaces, its maximum appropriate value is 1500. If for some reason a vServer has been created with a higher value (set on the /etc/sysconfig/network-scripts/ifcfg-bond0 file), then it must be fixed. An error like the following could be thrown under this circumstance: [root@vServer ~]# service network restart ... Bringing up interface bond0: SIOCSIFMTU: Invalid argument Also an error like the one below can be seen on the /var/log/messages file of the vServer: kernel: T5074835532 [mlx4_vnic] eth1:vnic_change_mtu:360: failed: new_mtu 64000 2026 The MOS Note 1611657.1 is very useful for this purpose.

Read the article

I was stuck in implementing Simple Ftp with Winsock [migrated]

- by user67449

I want to implement a SimpleFtp with Winsock. But I was stuck in the maybe the file stream reading and writing. This is the Server. #include <WinSock2.h> #include <memory.h> #include <stdio.h> #include <iostream> using namespace std; #pragma comment(lib, "ws2_32.lib") #define MAX_FILE_NAME 100 #define DATA_PACK_SIZE 80*1000 // ??DataPack?????80KB #define SOCKKET_BUFFER_SIZE 80*1000 // socket??? #define FILE_BUFFER_SIZE DATA_PACK_SIZE-MAX_FILE_NAME-4*sizeof(int)-sizeof(u_long) //?????,??,??????content????? #define CONTENT_SIZE FILE_BUFFER_SIZE // DataPack?????content??? // Define a structure to hold the content of a file typedef struct FilePack{ char fName[MAX_FILE_NAME]; // File's name int fLen; // File's length int packNum; // Number of the DataPack int packLen; // DataPack's length int packCount; int contenLen; // the content length the DataPack actually holds u_long index; // ?????????? char content[CONTENT_SIZE]; // DataPack?????? }DataPack, *pDataPack; void WinsockInitial(){ WSADATA wsaData; WORD wVersionRequested; int err; wVersionRequested=MAKEWORD(2,2); err=WSAStartup(wVersionRequested, &wsaData); if(err!=0){ cout<<"Error at WSAStartup()."<<endl; exit(0); } if( LOBYTE(wsaData.wVersion)!=2 || HIBYTE(wsaData.wVersion)!=2 ){ cout<<"Error at version of Winsock. "<<endl; WSACleanup(); exit(0); } } void SockBind(SOCKET sock, int port, sockaddr_in &addrsock){ addrsock.sin_family=AF_INET; addrsock.sin_port=htons(port); addrsock.sin_addr.S_un.S_addr=htonl(INADDR_ANY); if( bind(sock, (sockaddr*)&addrsock, sizeof(addrsock)) == SOCKET_ERROR ){ cout<<"Error at bind(). Error: "<<GetLastError()<<endl; closesocket(sock); WSACleanup(); exit(0); } } void SockListen(SOCKET sock, int bak){ int err=listen(sock, bak); if(err==SOCKET_ERROR){ cout<<"Error at listen()."<<WSAGetLastError()<<endl; closesocket(sock); WSACleanup(); exit(0); } } int SockSend(DataPack &dataPack, SOCKET sock, char *sockBuf){ int bytesLeft=0, bytesSend=0; int idx=0; bytesLeft=sizeof(dataPack); // ?DataPack?????sockBuf??? memcpy(sockBuf, &dataPack, sizeof(dataPack)); while(bytesLeft>0){ bytesSend=send(sock, &sockBuf[idx], bytesLeft, 0); if(bytesSend==SOCKET_ERROR){ cout<<"Error at send()."<<endl; return 1; } bytesLeft-=bytesSend; idx+=bytesSend; } return 0; } int GetFileLen(FILE *fp){ // ?????? if(fp==NULL){ cout<<"Invalid argument. Error at GetFileLen()."<<endl; exit(0); } fseek(fp, 0, SEEK_END); int tempFileLen=ftell(fp); fseek(fp, 0, SEEK_SET); return tempFileLen; } int main(){ int err; sockaddr_in addrServ; int port=8000; // Initialize Winsock WinsockInitial(); // Create a socket SOCKET sockListen=socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); if(sockListen==INVALID_SOCKET){ cout<<"Error at socket()."<<endl; WSACleanup(); return 1; } // Bind the socket. SockBind(sockListen, port, addrServ); // Listen for incoming connection requests cout<<"Waiting for incoming connection requests..."<<endl; SockListen(sockListen, 5); // Accept the connection request. sockaddr_in addrClient; int len=sizeof(addrClient); SOCKET sockConn=accept(sockListen, (sockaddr*)&addrClient, &len); if(sockConn!=INVALID_SOCKET){ cout<<"Connected to client successfully."<<endl; } // Set the buffer size of socket char sockBuf[SOCKKET_BUFFER_SIZE]; int nBuf=SOCKKET_BUFFER_SIZE; int nBufLen=sizeof(nBuf); err=setsockopt(sockConn, SOL_SOCKET, SO_SNDBUF, (char*)&nBuf, nBufLen); if(err!=0){ cout<<"Error at setsockopt(). Failed to set buffer size for socket."<<endl; exit(0); } //??????????? err = getsockopt(sockConn, SOL_SOCKET, SO_SNDBUF, (char*)&nBuf, &nBufLen); if( SOCKKET_BUFFER_SIZE != nBuf){ cout<<"Error at setsockopt(). ?socket????????"<<endl; closesocket(sockListen); closesocket(sockConn); WSACleanup(); exit(0); } //------------------------------------------------------------------------// DataPack dataPackSend; memset(&dataPackSend, 0, sizeof(dataPackSend)); int bytesRead; int bytesLeft; int bytesSend; int packCount; // Counts how many DataPack needed FILE *frp; // Used to read if(strcpy_s(dataPackSend.fName, "music.mp3")!=0){ cout<<"Error at strcpy_s()."<<endl; return 1; } // Open the file in read+binary mode err=fopen_s(&frp, dataPackSend.fName, "rb"); if(err!=0){ cout<<"Error at fopen_s()."<<endl; return 1; } char fileBuf[FILE_BUFFER_SIZE]; // Set the buffer size of File if(setvbuf(frp, fileBuf, _IONBF, FILE_BUFFER_SIZE)!=0){ cout<<"Error at setvbuf().Failed to set buffer size for file."<<endl; closesocket(sockListen); closesocket(sockConn); WSACleanup(); exit(0); } // Get file's length int fileLen=GetFileLen(frp); cout<<"File ???:"<<fileLen<<" bytes."<<endl; // Calculate how many DataPacks needed packCount=ceil( (double)fileLen/CONTENT_SIZE ); cout<<"File Length: "<<fileLen<<" "<<"Content Size: "<<CONTENT_SIZE<<endl; cout<<"???"<<packCount<<" ?DataPack"<<endl; int i=0; for(i=0; i<packCount; i++){ //?????dataPackSend????? memset(&dataPackSend, 0, sizeof(dataPackSend)); // Fill the dataPackSend if(strcpy_s(dataPackSend.fName, "abc.txt")!=0){ cout<<"Error at strcpy_s()."<<endl; return 1; } dataPackSend.packLen=DATA_PACK_SIZE; dataPackSend.fLen=fileLen; dataPackSend.packCount=packCount; if( packCount==1 ){ //??DataPack??? bytesRead=fread(fileBuf, 1, dataPackSend.fLen, frp); dataPackSend.contenLen=dataPackSend.fLen; memcpy(dataPackSend.content, fileBuf, bytesRead); dataPackSend.packNum=0; //???????DataPack // ?????dataPackSend?Client? if( SockSend(dataPackSend, sockConn, sockBuf)==0 ){ cout<<"??? "<<dataPackSend.packNum<<" ?DataPack"<<endl; } }else if( packCount>1 && i<(packCount-1) ){ // ???(???????) bytesRead=fread(fileBuf, 1, CONTENT_SIZE, frp); dataPackSend.contenLen=CONTENT_SIZE; memcpy(dataPackSend.content, fileBuf, bytesRead); dataPackSend.packNum=i; //?dataPackSend??????Client? if( SockSend(dataPackSend, sockConn, sockBuf)==0 ){ cout<<"??? "<<dataPackSend.packNum<<" ?DataPack."<<endl; } }else{ // ????? bytesRead=fread(fileBuf, 1, (dataPackSend.fLen-i*CONTENT_SIZE), frp); dataPackSend.contenLen=dataPackSend.fLen-i*CONTENT_SIZE; memcpy(dataPackSend.content, fileBuf, bytesRead); dataPackSend.packNum=i; //?dataPackSend???Client? if( SockSend(dataPackSend, sockConn, sockBuf)==0 ){ cout<<"??? "<<dataPackSend.packNum<<" ?DataPack."<<endl; } } } fclose(frp); closesocket(sockListen); closesocket(sockConn); WSACleanup(); return 0; } And this is Client. #include <WinSock2.h> #include <memory.h> #include <stdio.h> #include <iostream> using namespace std; #pragma comment(lib, "ws2_32.lib") #define MAX_FILE_NAME 100 #define DATA_PACK_SIZE 80*1000 // ??DataPack?????80KB #define SOCKKET_BUFFER_SIZE 80*1000 // socket??? #define FILE_BUFFER_SIZE DATA_PACK_SIZE-MAX_FILE_NAME-4*sizeof(int)-sizeof(u_long) //?????,??,??????content????? #define CONTENT_SIZE FILE_BUFFER_SIZE // DataPack?????content??? // Define a structure to hold the content of a file typedef struct FilePack{ char fName[MAX_FILE_NAME]; // File's name int fLen; // File's length int packNum; // Number of the DataPack int packLen; // DataPack's length int packCount; //DataPack??? int contenLen; // the content length the DataPack actually holds u_long index; // ?????????? char content[CONTENT_SIZE]; // DataPack?????? }DataPack, *pDataPack; void WinsockInitial(){ WSADATA wsaData; WORD wVersionRequested; int err; wVersionRequested=MAKEWORD(2,2); err=WSAStartup(wVersionRequested, &wsaData); if(err!=0){ cout<<"Error at WSAStartup()."<<endl; exit(0); } if( LOBYTE(wsaData.wVersion)!=2 || HIBYTE(wsaData.wVersion)!=2 ){ cout<<"Error at version of Winsock. "<<endl; WSACleanup(); exit(0); } } int SockRecv(SOCKET sock, char *sockBuf){ int bytesLeft, bytesRecv; int idx=0; bytesLeft=DATA_PACK_SIZE; while(bytesLeft>0){ bytesRecv=recv(sock, &sockBuf[idx], bytesLeft, 0); if(bytesRecv==SOCKET_ERROR){ cout<<"Error at recv()."<<endl; return 1; } bytesLeft-=bytesRecv; idx+=bytesRecv; } return 0; } int main(){ int err; sockaddr_in addrServ; int port=8000; // Initialize Winsock WinsockInitial(); // Create a socket SOCKET sockClient=socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); if(sockClient==INVALID_SOCKET){ cout<<"Error at socket()."<<endl; WSACleanup(); return 1; } // Set the buffer size of socket char sockBuf[SOCKKET_BUFFER_SIZE]; int nBuf=SOCKKET_BUFFER_SIZE; int nBufLen=sizeof(nBuf); err=setsockopt(sockClient, SOL_SOCKET, SO_RCVBUF, (char*)&nBuf, nBufLen); if(err!=0){ cout<<"Error at setsockopt(). Failed to set buffer size for socket."<<endl; exit(0); } //??????????? err = getsockopt(sockClient, SOL_SOCKET, SO_RCVBUF, (char*)&nBuf, &nBufLen); if( SOCKKET_BUFFER_SIZE != nBuf){ cout<<"Error at getsockopt(). ?socket????????"<<endl; closesocket(sockClient); WSACleanup(); exit(0); } // Connect to the Server addrServ.sin_family=AF_INET; addrServ.sin_port=htons(port); addrServ.sin_addr.S_un.S_addr=inet_addr("127.0.0.1"); err=connect(sockClient, (sockaddr*)&addrServ, sizeof(sockaddr)); if(err==SOCKET_ERROR){ cout<<"Error at connect()."<<GetLastError()<<endl; closesocket(sockClient); WSACleanup(); return 1; }else{ cout<<"Connected to the FTP Server successfully."<<endl; } /* int i=0; int bytesRecv, bytesLeft, bytesWrite; int packCount=0, fLen=0; DataPack dataPackRecv; //?????? SockRecv(sockClient, sockBuf); memcpy(&dataPackRecv, sockBuf, sizeof(dataPackRecv)); cout<<"???? "<<dataPackRecv.packNum<<" ?DataPack."<<endl; cout<<"?DataPack??fName????: "<<dataPackRecv.fName<<endl; //??????? packCount=dataPackRecv.packCount; cout<<"?? "<<packCount<<" ?DataPack."<<endl; fLen=dataPackRecv.fLen; // Create a local file to write into FILE *fwp; err=fopen_s(&fwp, dataPackRecv.fName, "wb"); if(err!=0){ cout<<"Error at creat fopen_s(). Failed to create a local file to write into."<<endl; return 1; } // Set the buffer size of File char fileBuf[FILE_BUFFER_SIZE]; if(setvbuf(fwp, fileBuf, _IONBF, FILE_BUFFER_SIZE)!=0){ cout<<"Error at setvbuf().Failed to set buffer size for file."<<endl; memset(fileBuf, 0, sizeof(fileBuf)); closesocket(sockClient); WSACleanup(); exit(0); } //???????content???? memcpy(fileBuf, dataPackRecv.content, sizeof(dataPackRecv.content)); bytesWrite=fwrite(fileBuf, 1, sizeof(fileBuf), fwp); if(bytesWrite<sizeof(fileBuf)){ cout<<"Error at fwrite(). Failed to write the content of dataPackRecv to local file."<<endl; } //?????packCount-1????????????????? for(int i=1; i<packCount; i++){ // ????????? memset(sockBuf, 0, sizeof(sockBuf)); memset(&dataPackRecv, 0, sizeof(dataPackRecv)); memset(fileBuf, 0, sizeof(fileBuf)); SockRecv(sockClient, sockBuf); memcpy(&dataPackRecv, sockBuf, sizeof(dataPackRecv)); cout<<"???? "<<dataPackRecv.packNum<<" ?DataPack."<<endl; //???? memcpy(fileBuf, dataPackRecv.content, dataPackRecv.contenLen); bytesWrite=fwrite(fileBuf, 1, dataPackRecv.contenLen, fwp); if(bytesWrite<dataPackRecv.contenLen){ cout<<"Error at fwrite(). Failed to write the content of dataPackRecv to local file."<<endl; } } if( (i+1)==packCount ){ cout<<"??DataPack????????!"<<endl; } fclose(fwp); closesocket(sockClient); WSACleanup(); return 0;*/ }

Search Results

Search found 12872 results on 515 pages for 'memory alignment'.

Page 418/515 | < Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425 | Next Page >

- by DevilWithin

- by guybarrette

- by rahulkamath

- by Michael

- by dsimcha

- by George T

- by TechTwaddle

- by uwes

- by Vipin Vinayan

- by jrosell

- by Psallas Vassilios

- by Robominister

- by Bob Rhubart

- by Andy B

- by user49995

- by Phil Factor

- by gam3

- by rocker9455

- by Optimus_Pwn

- by tigrou

- by Cinzia Mascanzoni

- by Janice J. Heiss

- by csoto

- by user67449

< Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425 | Next Page >