Search Results

Search found 12987 results on 520 pages for 'tulsa technology center'.

Page 419/520 | < Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >

  • Computer won't boot from a bootable DVD

    - by JohnB
    My friend gave me his old computer that used to have WinXP on it. I'm trying to load Win7 on it and I thought there was something wrong because it wouldn't boot off a bootable disc, even though I setup the BIOS boot settings properly (I've done this sort of thing a million times). However, this closely related post helped me realize that I can boot off a bootable CD (WinXP), just not a DVD (Win7) Computer won’t boot from CD/DVD drive That might be the answer to my question, however, this motherboard is still pretty current technology. It's a good quality Gigabyte board, and judging from this product page, it came out in 2004. If I can't figure out a solution to my DVD boot problem, I'll have to try something like this: Boot and Install Windows from a USB thumb drive I guess it's possible that this motherboard doesn't allow booting from a DVD, but I still think that I might be missing something. It wouldn't be the DVD rom drive would it? I did try another drive and had the same results. However, I didn't try booting a DVD in the computer that the other test drive came out of, I'll do that later today. Any other advice? Thanks.

    Read the article

  • Fatal Execution Engine Error on the Windows2008 r2, IIS7.5

    - by user66524
    Hi Guys We are running some asp.net(3.5) applications on the Windows2008 r2, IIS7.5. Recently we got some event logs so difficult, we have not idea hope some guys can help. 1.EventID: 1334 (9-1-2011 8:41:57) Error message An error occurred during a process host idle check. Exception: System.AccessViolationException Message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. StackTrace: at System.Collections.Hashtable.GetEnumerator() at System.Web.Hosting.ApplicationManager.IsIdle() at System.Web.Hosting.ProcessHost.IsIdle() 2.EventID: 1023 (9-1-2011 19:44:02) Error message .NET Runtime version 2.0.50727.4952 - Fatal Execution Engine Error (742B851A) (80131506) 3.EventID: 1000 (9-1-2011 19:44:03) Error message Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bcd2b Faulting module name: mscorwks.dll, version: 2.0.50727.4952, time stamp: 0x4bebd49a Exception code: 0xc0000005 Fault offset: 0x0000c262 Faulting process id: 0x%9 Faulting application start time: 0x%10 Faulting application path: %11 Faulting module path: %12 Report Id: %13 4.EventID: 5011 (9-1-2011 19:44:03) Error message A process serving application pool 'AppPoolName' suffered a fatal communication error with the Windows Process Activation Service. The process id was '2552'. The data field contains the error number. 5.some info: we got the memory.hdmp(234MB) and minidump.mdmp(19.2) from control panel action center but I donot know how to use that :(

    Read the article

  • Is basing storage requirements based on IOPS sufficient?

    - by Boden
    The current system in question is running SBS 2003, and is going to be migrated on new hardware to SBS 2008. Currently I'm seeing on average 200-300 disk transfers per second total across all the arrays in the system. The array seeing the bulk of activity is a 6 disk 7200RPM RAID 6 and it struggles to keep up during high traffic times (idle time often only 10-20%; response times peaking 20-50+ ms). Based on some rough calculations this makes sense (avg ~245 IOPS on this array at 70/30 read to write ratio). I'm considering using a much simpler disk configuration using a single RAID 10 array of 10K disks. Using the same parameters for my calculations above, I'm getting 583 average random IOPS / sec. Granted SBS 2008 is not the same beast as 2003, but I'd like to make the assumption that it'll be similar in terms of disk performance, if not better (Exchange 2007 is easier on the disk and there's no ISA server). Am I correct in believing that the proposed system will be sufficient in terms of performance, or am I missing something? I've read so much about recommended disk configurations for various products like Exchange, and they often mention things like dedicating spindles to logs, etc. I understand the reasoning behind this, but if I've got more than enough random I/O overhead, does it really matter? I've always at the very least had separate spindles for the OS, but I could really reduce cost and complexity if I just had a single, good performing array. So as not to make you guys do my job for me, the generic version of this question is: if I have a projected IOPS figure for a new system, is it sufficient to use this value alone to spec the storage, ignoring "best practice" configurations? (given similar technology, not going from DAS to SAN or anything)

    Read the article

  • How do I fix a custom Event Viewer Log that merges automatically with the Application log?

    - by NightOwl888
    I am trying to create a custom event log for a Windows Service on Windows Server 2003. I would like to name the custom log "(ML) Startup Commands". However, when I add a registry key with that name to HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\, it adds a log but shows the exact same events that are in the Application log when looking in the event viewer. If I add a registry key with the name "(ML) Startup Commands 2" to the event log, it shows a blank event log as expected. In fact, any other name will work correctly except for the one I want. I have searched through the registry for other keys with the string "(ML)" and removed all other references to this key name, however I continue to get merged results in the viewer when I create a key with this name. My question is, how can I fix the server so I can create a custom event log with this name that shows only the events from my application, not the events from the default Application event log that is installed with Windows? Update: I rebooted the server and woudn't you know it, the log started acting normally. I got a strange error message in the Application log: The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I can only hope this error doesn't mean the problem will come back after 86400 seconds. I guess I will have to wait and see.

    Read the article

  • SharePoint Search: processing filenames containing underscores

    - by Todd Owen
    We use SharePoint Server 2007 to allow employees to search network file shares, but it seems that underscores in filenames are not treated as word separators when indexing the files. As a result, a search for chocolate will: match "chocolate milkshake.doc" but not match "chocolate_cake.doc" (Of course, this is a simplified example; in practice the content of the second file might include the word "chocolate" and match on that instead of the filename. But the problem itself is real enough, because a common scenario in a corporate environment is that a user knows the the partial name of the file they are looking for and expects to see matching filenames at the top of the search results. And using underscores in filenames is a widely used convention within our company). Underscores are not treated as word separators in the file content either, although this is less of a concern for us. The root cause of this problem is possibly related to the behaviour of the word breakers that SharePoint uses (i.e. the language-specific DLLs that implement the IWorkBreaker interface), although I haven't confirmed this yet. Does anyone know of a workaround for this issue? I have tested with Search Server 2008 Express too (which is based on the same technology), and it is also affected. I do not know whether the problem is fixed in SharePoint 2010 or not.

    Read the article

  • VMware Data Recovery error -3960 and Event ID 8193 on Windows Server 2003

    - by flooooo
    I've been trying to solve this problem since a few days now without any success. What I'm trying is to make a backup of a virtual machine running Windows Server 2003 SP 2 using VMware Data Recovery 2.0.0.1861. When starting the backup task it tries to make a snapshot of the virtual machine using VSS which fails with error: Event Type: Error Event Source: VSS Event Category: None Event ID: 8193 Date: 05.06.2012 Time: 12:12:01 User: N/A Computer: LEGOLAS Description: Volume Shadow Copy Service error: Unexpected error calling routine RegSaveKeyExW. hr = 0x800703f8. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 2d 20 43 6f 64 65 3a 20 - Code: 0008: 57 52 54 52 45 47 52 43 WRTREGRC 0010: 30 30 30 30 30 33 39 36 00000396 0018: 2d 20 43 61 6c 6c 3a 20 - Call: 0020: 57 52 54 52 45 47 52 43 WRTREGRC 0028: 30 30 30 30 30 33 31 38 00000318 0030: 2d 20 50 49 44 3a 20 20 - PID: 0038: 30 30 30 30 36 34 38 38 00006488 0040: 2d 20 54 49 44 3a 20 20 - TID: 0048: 30 30 30 30 34 33 38 34 00004384 0050: 2d 20 43 4d 44 3a 20 20 - CMD: 0058: 43 3a 5c 57 49 4e 44 4f C:\WINDO 0060: 57 53 5c 53 79 73 74 65 WS\Syste 0068: 6d 33 32 5c 76 73 73 76 m32\vssv 0070: 63 2e 65 78 65 20 20 20 c.exe 0078: 2d 20 55 73 65 72 3a 20 - User: 0080: 4e 54 20 41 55 54 48 4f NT AUTHO 0088: 52 49 54 59 5c 53 59 53 RITY\SYS 0090: 54 45 4d 20 20 20 20 20 TEM 0098: 2d 20 53 69 64 3a 20 20 - Sid: 00a0: 53 2d 31 2d 35 2d 31 38 S-1-5-18 This machine was converted p2v. I have no idea where to search for the problem and what to do. Google showed a few result but none of them were useful for me. Please help me. If you need further information I'll tell you - just ask!

    Read the article

  • How can I parse/ transform text log data before it gets captured in SCOM 2007 R2?

    - by Abs
    I'm pretty much a noob with System Center Operations Manager 2007, and I'm probably missing something pretty basic, but I'm stumped anyway. We're setting up monitoring on some of our servers, and we'd like to capture data from some plain text log files (e.g. DNS debug logs, DHCP logs). It looks to me like I can set up a generic text file monitoring rule and get events captured into the main Ops Manager database, but my understanding is that the whole line of text from the plain text log gets captured as one field. In an ideal world, we'd be able to parse or transform that log file data to make it easier to query later. Is this possible? Is it easy? Do I have to buy expensive 3rd-party software to do it? One more thing: it would be even better if there was a way to stuff this data into the Audit Collection Services (ACS) database instead of the main one, but I'll take what I can get. Any help would be greatly appreciated.

    Read the article

  • some windows 8 metro (modern UI) apps don't open, but live tiles DO work

    - by DiegoDD
    Some of my default windows 8 metro (modern UI) apps don't work properly, the apps are the Weather and the News apps. when I open them, I only get the loading screen, that is, the big colorful screen with the logo in the center, and the "loading" spinning dots. They just keep like that forever and never actually open. There are no error messages or anything. The strange this is that the live tiles for those apps DO work and show current information. current weather for my location (saved before they started failing) and current news. Both apps did work well in the past, and every other default windows 8 app I've tried work well (both live tiles and the app itself). Every other non-default apps that I've downloaded still work correctly, so the problem so far is only with those two apps. (weather and news). I really don't know since when exactly they started to fail because I really don't use them (or any metro app) that often, so I can't recall if I did something like installing some other app, either metro or regular, or messed with some drivers, etc. they simply don't open now, but they DID work before. any ideas?

    Read the article

  • High latency issue for web service call from amazon aws ec2 to local server

    - by SibzTer
    We have a legacy web application that is running in our data center on premises located in Houston. We have a developed a new .net 4 based web application in order to provide new features to customers. The new web application is hosted in amazon aws ec2 environment (N. Virginia region us-east-1b zone). In order to get seamlessly integrate with the legacy application the new web application makes web service calls to retrieve data. We are seeing an unusually high latency time in the order of 5+ seconds for these web service calls. The exact same web service call returns in less than a second on our local PCs (which makes sense given physical proximity to the actual server). The weird part is that we have developers in California who also have the same milliseconds response time. We are testing the web service response using third party tools such as SoapUI, Google Chrome extensions such as Advanced REST Client, Postman REST Client, etc. As if this wasnt weird enough, we have noticed the same low latency from certain other ec2 instances while testing which are in the same region and availability zone as well. If we experienced the high latency consistently from all the ec2 instances I could understand. But there is something else going on. Comparing the various stats and results between the low latency and high latency ec2 servers do not show any significant differences: ping (constant 40ms), tracert, winmtr, etc. We have instances that are in the VPC as well. So I tried both the public and private IP address of the web service host server and that didnt make a difference either for the above results. We need to resolve this latency issue as this is causing the resulting web pages to load very slowly (almost 15+ seconds which is simply unacceptable). The ec2 instances have Windows Server Datacenter 64 bit. Let me know if there is any other infor I can provide to help diagnose this.

    Read the article

  • SPDIF passthrough not working in Windows 7

    - by adriangrigore
    Hi, I'm running Windows 7 on a computer with an Audigy Platinum eX sound card connected to a surround receiver via optical cabling. Sound works fine when listening to non-surround audio sources, such as windows sounds or MP3. However, when I view a DVD in Media Center and the SPDIF passthrough kicks in, I can only hear an awful noise instead of the movie soundtrack. Also, the receiver does not show the Dolby Digital or DTS symbol, but stays at Dolby Prologic, so it seems it doesn't identify the sound encoding properly. I could switch off SPDIF passthrough and use the sound card's decoder instead, but that's not an option for me since it would create more problems with regular MP3 playback via additional Stereo Receiver which is also connected to the same sound card. I've tried both the default Audigy drivers that come with Windows 7 and the latest drivers from the Soundblaster website, but the problem remains unchanged. Also, I have ensured that the receiver's Dolby Digital decoder is not broken by successfully connecting it to my PS3 to view a Dolby Digital DVD. Besides, SPDIF passthrough was working fine in Vista before I upgraded to Windows 7. Is there anything else I could try?

    Read the article

  • Resolving a BSOD/CPU/GPU issue...

    - by Christian Sciberras
    Hello all, I'm getting a BSOD / system crash (sometimes the PC just quits without a BSOD). Hardware Specifications cpu: i7 920 2666MHz / 8 cores (not OCed afaik) mobo: Asus P6T SE ram: 2x Corsair CM3X2G1333C9 (64bit DDR3 667MHz) gfx: ATI Radeon HD 5970 1GB (XFX HD5970 BE) os: Windows 7 Ultimate 64 bit (legit) All bios, firmware and drivers are all up to date (as of today). Symptoms Sometimes the PC runs smoothly, sometimes I get this BSOD. The BSOD always happens when I'm doing something related to graphics, such as viewing a video or playing a game. I get to know about the imminent BSOD ~10 seconds earlier; the PC starts freezing occasionally but increasing in frequency and length of lag (I noticed processor usage in creased from Process Monitor). I've tweaked BIOS settings occasionally but afaik, it was in vain. A day or so ago, I reset it to factory settings. BSOD contents The computer has rebooted from a bugcheck. The bugcheck was: 0x00000101 (0x0000000000000019, 0x0000000000000000, 0xfffff88001f35180, 0x0000000000000004). 15-12-2010 A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Internal Timer Error Processor ID: 4 23-12-2010 A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Internal Timer Error Processor ID: 2 Important The interesting thing is that although the event log (and BSOD screen) blame a "secondary processor", Windows Action Center sometimes blamed the GFX driver (for the same error). Also It is interesting to note that after hibernating my PC, I always get the BSOD.

    Read the article

  • Possible to IPSec VPN Tunnel Public IP Addresses?

    - by caleban
    A customer uses an IBM SAS product over the internet. Traffic flows from the IBM hosting data center to the customer network through Juniper VPN appliances. IBM says they're not tunneling private IP addresses. IBM says they're tunneling public IP addresses. Is this possible? What does this look like in the VPN configuration and in the packets? I'd like to know what the source/destination ip/ports would look like in the encrypted tunneled IPSec Payload and in the IP packet carrying the IPSec Payload. IPSec Payload: source:1.1.1.101:1001 destination:2.2.2.101:2001 IP Packet: source:1.1.1.1:101 destination:2.2.2.1:201 Is it possible to send public IP addresses through an IPSec VPN tunnel? Is it possible for IBM to send a print job from a server on their network using the static-nat public address over a VPN to a printer at a customer network using the printer's static-nat public address? Or can a VPN not do this? Can a VPN only work with interesting traffic from and to private IP addresses?

    Read the article

  • Security for university research lab systems

    - by ank
    Being responsible for security in a university computer science department is no fun at all. And I explain: It is often the case that I get a request for installation of new hw systems or software systems that are really so experimental that I would not dare put them even in the DMZ. If I can avoid it and force an installation in a restricted inside VLAN that is fine but occasionally I get requests that need access to the outside world. And actually it makes sense to have such systems have access to the world for testing purposes. Here is the latest request: A newly developed system that uses SIP is in the final stages of development. This system will enable communication with outside users (that is its purpose and the research proposal), actually hospital patients not so well aware of technology. So it makes sense to open it to the rest of the world. What I am looking for is anyone who has experience with dealing with such highly experimental systems that need wide outside network access. How do you secure the rest of the network and systems from this security nightmare without hindering research? Is placement in the DMZ enough? Any extra precautions? Any other options, methodologies?

    Read the article

  • Getting 2560x1600 out of an ATI Radeon HD 4670 on Windows 7

    - by Alexey
    Greetings, I've got a Dell Studio XPS 1640 laptop (with an ATI Radeon HD 4670 graphics card) running Windows 7, and just bought a Dell 3007HPC 30-inch monitor for it. I'm trying to figure out how to get the full 2560x1600 experience out of this setup. Here's what I've done so far: Plug in using an HDMI cable and an HDMI--D-DVI converter on the monitor side. Open up Screen Resolution. Maximum supported setting is 1920x1080. Tried that (several times) - sometimes it doesn't work at all (blank screen); other times, it only shows the first 1280x800 pixels on the bigger screen. Tried using the Catalyst control center - played with various settings there, couldn't get the screen to show anything interesting. Tried using PowerStrip to set a custom resolution, again, no luck. Spoke to a Dell Preferred Custom Support guy for about an hour before giving up. He remote-accessed my computer, and told me that (1) The maximum supported resolution for XPS 1640 is 1920x1080, and (2) 'it seems to be working from where he sees it, must be a connection issue'. None of this has helped. Does anybody have ideas? Should I be using a different cable set up? Am I using Powerstrip wrong?

    Read the article

  • Win7 - Some pinned program's icons are corrupt, show default

    - by Andrew Backer
    I have both FF 3.6 & Chrome pinned to my taskbar in win7. The icons for these two programs show up as the ugly default icon from yesteryear. Strange. Is there some way to force an icon refresh for pinned programs? When I first added them they showed properly, but several days later they reverted to this state Un-pinning the program causes the icon to show up properly, and re-pinning it causes it to break again. These other proggies show up fine: Media Center, Media Player Classic HC, Hulu Desktop, WMP, and the folders. I have 2 user accounts on this box, and both are showing this behavior. I have tried changing the taskbar icon size to 'small' and back, but to no effect. Edit (Add) The icons show up as broken in the start menu too, but I can navigate to the EXE directly. When I click "change icon" in the properties for the start menu entry I get the error : Can not find %ProgramFiles%\Google\Chrome...\chrome.exe.

    Read the article

  • Can one really fry a monitor by setting the wrong HorizSync and VertRefresh?

    - by rumtscho
    I've encountered this problem on several different systems with several different monitors: a monitor functions perfectly under Windows. I install a Linux and the max resolution is at some impossibly low value, mostly 640x480, changing it in Xorg.conf doesn't work. The X.org log file then shows that the driver cannot determine the correct refresh rate for the monitor, so it ignores everything in Xorg.conf and just loads in some default minimalistic mode. Googling the problem leads to an easy solution: set the HorizSync and VertRefresh in Xorg.conf, and everything works. The problem seems to be a common one, and I've seen dozens of results recommending the solution. Each of them contains the warning that you should use the value ranges provided with the monitor. Because if you don't, and your video card sends a signal with the wrong refresh rate, this can damage your monitor. Of course, you don't have a user manual for your monitor any more. If you are lucky to find one on the attic or on the net, it doesn't contain any information about the supported refresh rate. So you just type in the value suggested in the solution description, which varies wildly depending on your source, and cross your fingers. You restart, and... ... you've set the wrong values. So the monitor shows a short message like "input signal out of range", and you do a hard restart, repair your Xorg.conf in recovery mode, and everything is fine, including your monitor. So does this warning reflect a real possibility, or is it just a geeky urban legend? Or is it something which used to happen in the past, before manufacturers started protecting the monitors against it? Is it technically possible with every monitor technology, or is it maybe something which can only happen to a CRT? If you think that it's true, why? Have you ever witnessed a monitor die from the wrong refresh config, or have you read of it in a reputable source?

    Read the article

  • How to Upload a file from client to server using OFBIZ?

    - by SIVAKUMAR.J
    Hi all, Im new to ofbiz.So is my question is have any mistake forgive me for my mistakes.Im new to ofbiz so i did not know some terminologies in ofbiz.Sometimes my question is not clear because of lack of knowledge in ofbiz.So try to understand my question and give me a good solution with respect to my level.Because some solutions are in very high level cannot able to understand for me.So please give the solution with good examples. My problem is i created a project inside the ofbiz/hot-deploy folder namely "productionmgntSystem".Inside the folder "ofbiz\hot-deploy\productionmgntSystem\webapp\productionmgntSystem" i created a .ftl file namely "app_details_1.ftl" .The following are the coding of this file <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> <title>Insert title here</title> <script TYPE="TEXT/JAVASCRIPT" language=""JAVASCRIPT"> function uploadFile() { //alert("Before calling upload.jsp"); window.location='<@ofbizUrl>testing_service1</@ofbizUrl>' } </script> </head> <!-- <form action="<@ofbizUrl>testing_service1</@ofbizUrl>" enctype="multipart/form-data" name="app_details_frm"> --> <form action="<@ofbizUrl>logout1</@ofbizUrl>" enctype="multipart/form-data" name="app_details_frm"> <center style="height: 299px; "> <table border="0" style="height: 177px; width: 788px"> <tr style="height: 115px; "> <td style="width: 103px; "> <td style="width: 413px; "><h1>APPLICATION DETAILS</h1> <td style="width: 55px; "> </tr> <tr> <td style="width: 125px; ">Application name : </td> <td> <input name="app_name_txt" id="txt_1" value=" " /> </td> </tr> <tr> <td style="width: 125px; ">Excell sheet &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;: </td> <td> <input type="file" name="filename"/> </td> </tr> <tr> <td> <!-- <input type="button" name="logout1_cmd" value="Logout" onclick="logout1()"/> --> <input type="submit" name="logout_cmd" value="logout"/> </td> <td> <!-- <input type="submit" name="upload_cmd" value="Submit" /> --> <input type="button" name="upload1_cmd" value="Upload" onclick="uploadFile()"/> </td> </tr> </table> </center> </form> </html> the following coding is present in the file "ofbiz\hot-deploy\productionmgntSystem\webapp\productionmgntSystem\WEB-INF\controller.xml" ...... ....... ........ <request-map uri="testing_service1"> <security https="true" auth="true"/> <event type="java" path="org.ofbiz.productionmgntSystem.web_app_req.WebServices1" invoke="testingService"/> <response name="ok" type="view" value="ok_view"/> <response name="exception" type="view" value="exception_view"/> </request-map> .......... ............ .......... <view-map name="ok_view" type="ftl" page="ok_view.ftl"/> <view-map name="exception_view" type="ftl" page="exception_view.ftl"/> ................ ............. ............. The following are the coding present in the file "ofbiz\hot-deploy\productionmgntSystem\src\org\ofbiz\productionmgntSystem\web_app_req\WebServices1.java" package org.ofbiz.productionmgntSystem.web_app_req; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import java.io.DataInputStream; import java.io.FileOutputStream; import java.io.IOException; public class WebServices1 { public static String testingService(HttpServletRequest request, HttpServletResponse response) { //int i=0; String result="ok"; System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- Start"); String contentType=request.getContentType(); System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- contentType : "+contentType); String str=new String(); // response.setContentType("text/html"); //PrintWriter writer; if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0)) { System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) after if (contentType != null)"); try { // writer=response.getWriter(); System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - try Start"); DataInputStream in = new DataInputStream(request.getInputStream()); int formDataLength = request.getContentLength(); byte dataBytes[] = new byte[formDataLength]; int byteRead = 0; int totalBytesRead = 0; //this loop converting the uploaded file into byte code while (totalBytesRead < formDataLength) { byteRead = in.read(dataBytes, totalBytesRead,formDataLength); totalBytesRead += byteRead; } String file = new String(dataBytes); //for saving the file name String saveFile = file.substring(file.indexOf("filename=\"") + 10); saveFile = saveFile.substring(0, saveFile.indexOf("\n")); saveFile = saveFile.substring(saveFile.lastIndexOf("\\")+ 1,saveFile.indexOf("\"")); int lastIndex = contentType.lastIndexOf("="); String boundary = contentType.substring(lastIndex + 1,contentType.length()); int pos; //extracting the index of file pos = file.indexOf("filename=\""); pos = file.indexOf("\n", pos) + 1; pos = file.indexOf("\n", pos) + 1; pos = file.indexOf("\n", pos) + 1; int boundaryLocation = file.indexOf(boundary, pos) - 4; int startPos = ((file.substring(0, pos)).getBytes()).length; int endPos = ((file.substring(0, boundaryLocation)).getBytes()).length; //creating a new file with the same name and writing the content in new file FileOutputStream fileOut = new FileOutputStream("/"+saveFile); fileOut.write(dataBytes, startPos, (endPos - startPos)); fileOut.flush(); fileOut.close(); System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - try End"); } catch(IOException ioe) { System.out.println("\n\n\t*********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - Catch IOException"); //ioe.printStackTrace(); return("exception"); } catch(Exception ex) { System.out.println("\n\n\t*********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - Catch Exception"); return("exception"); } } else { System.out.println("\n\n\t********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) else part"); result="exception"; } System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- End"); return(result); } } I want to upload a file to the server.The file is get from user "<input type="file"..> tag in the "app_details_1.ftl" file & it is updated into the server by using the method "testingService(HttpServletRequest request, HttpServletResponse response)" in the class "WebServices1".But the file is not uploaded. Give me a good solution for uploading a file to the server. Thanks & Regards, Sivakumar.J

    Read the article

  • Name one good reason for immediately failing on a SMTP 4xx code

    - by Avery Payne
    I'm really curious about this. The question (highlighed in bold): Can someone name ONE GOOD REASON to have their email server permanently set up to auto-fail/immediate-fail on 4xx codes? Because frankly, it sounds like "their" setups are broken out-of-the-box. SMTP is not Instant Messaging. Stop treating it like IRC or Jabber or MSN or insert-IM-technology-here. I don't know what possesses people to have the "IMMEDIATE DELIVERY OR FAIL" mentality with SMTP setups, but they need to stop doing that. It just plain breaks things. Every two or three years, I stumble into this. Someone, somewhere, has decided in their infinite wisdom that 4xx codes are immediate failures, and suddenly its OMGWTFBBQ THE INTARNETZ ARE BORKEN, HALP SKY IS FALLING instead of "oh, it'll re-attempt delivery in about 30 minutes". It amazes me how it suddenly becomes "my" problem that a message won't go through, because someone else misconfigured "their" SMTP service. IF there is a legitimate reason for having your server permanently set up in this manner, then the first good answer will get the check. IF there is no good reason (and I suspect there isn't), then the first good-sounding-if-still-logically-flawed answer will get the check.

    Read the article

  • Rsync when run in cron doesnt work. Rsync between Mac Os x Server and Linux Centos

    - by Brady
    I have a working rsync setup between Mac OS X Server and Linux Centos when run manually in a terminal. I enter the rsync command, it asks for the password, I enter it and off it goes, runs and completes. Now I know thats working I set out to fully automate it via cron. First off I create an SSH authorized key by running this command on the Mac server: ssh-keygen -t dsa -b 1024 -f /Users/admin/Documents/Backup/rsync-key Entering the password and then confirming it. I then copy the rsync-key.pub file accross to the linux server and place in the rsync user .ssh folder and rename to authorized_keys: /home/philosophy/.ssh/authorized_keys I then make sure that the authorized_keys file is chmod 600 in the folder chmod 700. I then setup a shell script for cron to run: #!/bin/bash RSYNC=/usr/bin/rsync SSH=/usr/bin/ssh KEY=/Users/admin/Documents/Backup/rsync-key RUSER=philosophy RHOST=example.com RPATH=data/ LPATH="/Volumes/G Technology G Speed eS/Backup" $RSYNC -avz --delete --progress -e "$SSH -i $KEY" "$LPATH" $RUSER@$RHOST:$RPATH Then give the shell file execute permissions and then add the following to the crontab using crontab -e: 29 12 * * * /Users/admin/Documents/Backup/backup.sh I check my crontab log file after the above command should run and I get this in the log and nothing else: Feb 21 12:29:00 fileserver /usr/sbin/cron[80598]: (admin) CMD (/Users/admin/Documents/Backup/backup.sh) So I asume everything has run as it should. But when I check the remote server no files have been copied accross. If I run the backup.sh file in a terminal as normal it still prompts for a password but this time its through the Mac Key chain system rather than typing into the console window. With the Mac Key Chain I can set it to save the password so that it doesnt ask for it again but Im sure when run with cron this password isnt picked up. This is where I'm asuming where rsync in cron is failing because it needs a password to connect but I thought the whole idea of making the SSH keys was to prevent the use of a password. Have I missed a step or done something wrong here? Thanks Scott

    Read the article

  • Where in the stack is Software Restriction Policies implemented?

    - by Knox
    I am a big fan of Software Restriction Policies for Microsoft Windows and was recently updating our settings for this. I became curious as to where Microsoft implemented this technology in the stack. I can imagine a very naive implementation being in Windows Explorer where when you double click on an exe or other blocked file type, that Explorer would check against the policy. I call this naive because obviously this wouldn't protect against someone typing something in a CMD window. Or worse, Adobe Reader running an external application. On the other hand, I can imagine that software restriction policies could be implemented deep in the stack almost at the metal. In this case, the low level loader would load into memory the questionable file, but mark the memory in the memory manager as non-executable data. I'm pretty sure that Microsoft did not do the most naive implementation, because if I block Java using a path block, Internet Explorer will crash if it attempts to load Java. Which is what I want. But I'm not sure how deep in the stack it's implemented and any insight would be appreciated.

    Read the article

  • Windows XP corrupts registry every several hours

    - by Ilya Kazakevich
    There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

    Read the article

  • Windows XP corrupts registry every several hours

    - by Ilya Kazakevich
    There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

    Read the article

  • Trying to understand Wireless N vs Wireless AC

    - by EGHDK
    Whenever a new wireless standard gets approved you expect faster speeds and longer range. From everything that I've read about it, it seems that AC will only transfer over the 5GHz band and up to 3Gbps. Studying the new AC routers on the market, it seems that they will transfer over 5GHz and 2.4GHz. And 5GHz will only transfer at 1.3Gbps. Which isn't what AC is supposed to be. I know there is a difference between what the standard actually says, and what products will actually do, but is there any reason for this? Is there any other main differences between AC and N? I've heard people discussing AC and saying that it's finally "fixing" what N was supposed to fix... what do they mean by that? Any security benefits? I have seen this image online: Will AC really do that? Will that require an AC network card in my laptop for that to actually happen? Lastly, will the router only be able to communicate with AC devices if I have beamforming technology on? I know it's a ton of questions, but most articles online seem to be outdated, and don't provide too much reliability.

    Read the article

  • Architecture for highly available MySQL with automatic failover in physically diverse locations

    - by Warner
    I have been researching high availability (HA) solutions for MySQL between data centers. For servers located in the same physical environment, I have preferred dual master with heartbeat (floating VIP) using an active passive approach. The heartbeat is over both a serial connection as well as an ethernet connection. Ultimately, my goal is to maintain this same level of availability but between data centers. I want to dynamically failover between both data centers without manual intervention and still maintain data integrity. There would be BGP on top. Web clusters in both locations, which would have the potential to route to the databases between both sides. If the Internet connection went down on site 1, clients would route through site 2, to the Web cluster, and then to the database in site 1 if the link between both sites is still up. With this scenario, due to the lack of physical link (serial) there is a more likely chance of split brain. If the WAN went down between both sites, the VIP would end up on both sites, where a variety of unpleasant scenarios could introduce desync. Another potential issue I see is difficulty scaling this infrastructure to a third data center in the future. The network layer is not a focus. The architecture is flexible at this stage. Again, my focus is a solution for maintaining data integrity as well as automatic failover with the MySQL databases. I would likely design the rest around this. Can you recommend a proven solution for MySQL HA between two physically diverse sites? Thank you for taking the time to read this. I look forward to reading your recommendations.

    Read the article

  • How do I make ESXi 5.0 to shutdown virtual machines when the physical power button is pushed?

    - by Pawel Sawicki
    I have a home NAS/DLNA server built out of an HP Micro Server with the HP branded VMware ESXi 5.0.0 build-623860 (free license) installed. Being a home media center I'd like it to be "manageable" by all my household members. This requires that it needs to be powered on an off (including all the VMs inside) by anybody with the physical access to the server by simply pressing the power button on the chassis. The "startup" part is easy to obtain - all I had to do was to configure the startup/shutdown policy: Once the server powers up, all VMs start as well and that's exactly what I need. Well.. it did work up until 5.0.0U1, but that's a different story: http://blogs.vmware.com/vsphere/2012/03/free-esxi-hypervisor-auto-start-breaks-with-50-update-1.html Unfortunately, pressing the power button doesn't gracefully shutdown the guest machines - they are terminated instead. If I run the "shut down" command from the vSphere Client interface guests are powered off. I'd like to get the same end result when the physical power button is switched. I've poked around a bit on the ESXi server. There's a "/sbin/shutdown.sh" script that seemed to do exactly what I need... but after trying it does exactly what the power off button. The "/etc/inittab" contains an entry for the "shutdown" level but I suppose it's not hooked to the power button. I can't find any acpi related configuration, neither do I know what exactly is executed when the power button is pressed. Does anybody have a clue how can I make the VMs shutdown automatically when the physical power switch is pressed to turn of the computer?

    Read the article

< Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >