Search Results

Search found 1558 results on 63 pages for 'bill seven'.

Page 42/63 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • IBus client for GNU Emacs: Installed, but how do I start it?

    - by fred.bear
    Having recently moved to Linux/Ubuntu, I'm looking for a good editor, and GNU Emacs seems to fit the bill. One thing I want from a text editor is the ability to handle Unicode Input Method Editors in a "normal way", across the board. For Ubuntu, the "normal way" is via IBus. However, emacs does not support IBus "off the shelf". I found a launchpad project: IBus client for GNU Emacs: ibus-el. I've installed ibus-el and set it up as per the Customize section of this emacswiki IBusMode page. I included the suggested "toggle" keybinding: ;; Use s-SPC to toggle input status It seems to have installed okay, but I have no idea how to invoke IBus and switch IMEs. s-SPC doesn't fire up the IBus language panel... I'm stuck :( ...so close, yet so far.... Here are the startup *messages* Loading 00debian-vars... No /etc/mailname. Reverting to default... Loading 00debian-vars...done Loading /etc/emacs/site-start.d/50autoconf.el (source)...done Loading /etc/emacs/site-start.d/50dictionaries-common.el (source)... Loading debian-ispell... Loading /var/cache/dictionaries-common/emacsen-ispell-default.el (source)...done Loading debian-ispell...done Loading /var/cache/dictionaries-common/emacsen-ispell-dicts.el (source)...done Loading /etc/emacs/site-start.d/50dictionaries-common.el (source)...done Loading /etc/emacs/site-start.d/50festival.el (source)...done Loading /etc/emacs/site-start.d/50gtk-doc-tools.el (source)...done Loading /etc/emacs/site-start.d/50ibus-el.el (source)...done IBus: Xlib.protocol.request.QueryExtension IBus: Agent successfully started for display ":0.0"

    Read the article

  • Finding a laptop to fit my spec's

    - by Mick
    I have a small list of characteristics that are required for a new laptop and have been looking for websites where I can specify my requirements and see which laptops fit the bill. I want to specify OS/RAM/HDD size/CD drive/screen resolution/battery life. I have found several sites so far where I can specify everything except battery life. Does such a site exist? I know that this is not a shopping site - but before any moderator rushes to close this question - please note that I am not asking "where do I buy this laptop" - merely what laptop fits this specs. I don't even care what country the website is based in.

    Read the article

  • How do you cope with change in open source frameworks that you use for your projects?

    - by Amy
    It may be a personal quirk of mine, but I like keeping code in living projects up to date - including the libraries/frameworks that they use. Part of it is that I believe a web app is more secure if it is fully patched and up to date. Part of it is just a touch of obsessive compulsiveness on my part. Over the past seven months, we have done a major rewrite of our software. We dropped the Xaraya framework, which was slow and essentially dead as a product, and converted to Cake PHP. (We chose Cake because it gave us the chance to do a very rapid rewrite of our software, and enough of a performance boost over Xaraya to make it worth our while.) We implemented unit testing with SimpleTest, and followed all the file and database naming conventions, etc. Cake is now being updated to 2.0. And, there doesn't seem to be a viable migration path for an upgrade. The naming conventions for files have radically changed, and they dropped SimpleTest in favor of PHPUnit. This is pretty much going to force us to stay on the 1.3 branch because, unless there is some sort of conversion tool, it's not going to be possible to update Cake and then gradually improve our legacy code to reap the benefits of the new Cake framework. So, as usual, we are going to end up with an old framework in our Subversion repository and just patch it ourselves as needed. And this is what gets me every time. So many open source products don't make it easy enough to keep projects based on them up to date. When the devs start playing with a new shiny toy, a few critical patches will be done to older branches, but most of their focus is going to be on the new code base. How do you deal with radical changes in the open source projects that you use? And, if you are developing an open source product, do you keep upgrade paths in mind when you develop new versions?

    Read the article

  • Microsoft and innovation: IIF() method

    This Saturday I was watching a couple of eLearning videos from TrainSignal (thanks to the subscription I have with Pluralsight) on Querying Microsoft SQL Server 2012 (exam 70-461). 'Innovation' by Microsoft I kept myself busy learning 'new' things about Microsoft SQL Server 2012 and some best practices. It was incredible 'innovative' to see that there is an additional logic function called IIF() available now: Returns one of two values depending on the value of a logical expression. IIF(lExpression, eExpression1, eExpression2) Ups, my bad... That's actually taken from the syntax page of Visual FoxPro 9.0 SP 2. And tada, at least seven (7+) years later, there's the recent IIF() Transact-SQL version of that function: Returns one of two values, depending on whether the Boolean expression evaluates to true or false in SQL Server 2012. IIF ( boolean_expression, true_value, false_value ) Now, that's what I call innovation! But we all know what happened to Visual FoxPro... It has been reincarnated in form of Visual Studio LightSwitch (and SQL Server). Enough ranting... Happy coding!

    Read the article

  • Model View Control Issue: Null Pointer Initialization Question

    - by David Dimalanta
    Good morning again. This is David. Please, I need an urgent help regarding control model view where I making a code that uniquely separating into groups: An Activity Java Class to Display the Interface A View and Function Java Class for Drawing Cards and Display it on the Activity Class The problem is that the result returns a Null Pointer Exception. I have initialize for the ID for Text View and Image View. Under this class "draw_deck.java". Please help me. Here's my code for draw_deck.java: package com.bodapps.inbetween.model; import android.content.Context; import android.view.View; import android.widget.ImageView; import android.widget.TextView; import com.bodapps.inbetween.R; public class draw_deck extends View { public TextView count_label; public ImageView draw_card; private int count; public draw_deck(Context context) { super(context); // TODO Auto-generated constructor stub //I have initialized two widgets for ID. I still don't get it why I got forced closed by Null Pointer Exception thing. draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); count_label = (TextView) findViewById(R.id.Text_View_Count_Card); } public void draw(int s, int c, String strSuit, String strValue, Pile pile, Context context) { //super(context); //Just printing the card drawn from pile int suit, value = 1; draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); count_label = (TextView) findViewById(R.id.Text_View_Count_Card); Card card; if(!pile.isEmpty()) //Setting it to IF statement displays the card one by one. { card = pile.drawFromPile(); //Need to check first if card is null. if (card != null) { //draws an extra if (card != null) { //Get suit of card to print out. suit = card.getSuit(); switch (suit) { case CardInfo.DIAMOND: strSuit = "DIAMOND"; s=0; break; case CardInfo.HEART: strSuit = "HEART"; s=1; break; case CardInfo.SPADE: strSuit = "SPADE"; s=2; break; case CardInfo.CLUB: strSuit = "CLUB"; s=3; break; } //Get value of card to print out. value = card.getValue(); switch (value) { case CardInfo.ACE: strValue = "ACE"; c=0; break; case CardInfo.TWO: c=1; break; case CardInfo.THREE: strValue = "THREE"; c=2; break; case CardInfo.FOUR: strValue = "FOUR"; c=3; break; case CardInfo.FIVE: strValue = "FIVE"; c=4; break; case CardInfo.SIX: strValue = "SIX"; c=4; break; case CardInfo.SEVEN: strValue = "SEVEN"; c=4; break; case CardInfo.EIGHT: strValue = "EIGHT"; c=4; break; case CardInfo.NINE: strValue = "NINE"; c=4; break; case CardInfo.TEN: strValue = "TEN"; c=4; break; case CardInfo.JACK: strValue = "JACK"; c=4; break; case CardInfo.QUEEN: strValue = "QUEEN"; c=4; break; case CardInfo.KING: strValue = "KING"; c=4; break; } } } }// //Below two lines of code, this is where issued the Null Pointer Exception. draw_card.setImageResource(deck[s][c]); count_label.setText(new StringBuilder(strValue).append(" of ").append(strSuit).append(String.valueOf(" " + count++)).toString()); } //Choice of Suits in a Deck public Integer[][] deck = { //Array Group 1 is [0][0] (No. of Cards: 4 - DIAMOND) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 2 is [1][0] (No. of Cards: 4 - HEART) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 3 is [2][0] (No. of Cards: 4 - SPADE) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 4 is [3][0] (No. of Cards: 4 - CLUB) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, }; } And this one of the activity class, Player_Mode_2.java: package com.bodapps.inbetween; import java.util.Random; import android.app.Activity; import android.app.Dialog; import android.content.Context; import android.os.Bundle; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.EditText; import android.widget.ImageView; import android.widget.TextView; import android.widget.Toast; import com.bodapps.inbetween.model.Card; import com.bodapps.inbetween.model.Pile; import com.bodapps.inbetween.model.draw_deck; /* * * Public class for Two-Player mode. * */ public class Player_Mode_2 extends Activity { //Image Views private ImageView draw_card; private ImageView player_1; private ImageView player_2; private ImageView icon; //Buttons private Button set_deck; //Edit Texts private EditText enter_no_of_decks; //text Views private TextView count_label; //Integer Data Types private int no_of_cards, count; private int card_multiplier; //Contexts final Context context = this; //Pile Model public Pile pile; //Card Model public Card card; //create View @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.play_2_player_mode); //-----[ Search for Views ]----- //Initialize for Image View draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); player_1 = (ImageView) findViewById(R.id.IV_Player_1_Card); player_2 = (ImageView) findViewById(R.id.IV_Player_2_Card); //Initialize for Text view or Label count_label = (TextView) findViewById(R.id.Text_View_Count_Card); //-----[ Adding Values ]----- //Integer Values count = 0; no_of_cards = 0; //-----[ Adding Dialog ]----- //Initializing Dialog final Dialog deck_dialog = new Dialog(context); deck_dialog.setContentView(R.layout.dialog); deck_dialog.setTitle("Deck Dialog"); //-----[ Initializing Views for Dialog's Contents ]----- //Initialize for Edit Text enter_no_of_decks = (EditText) deck_dialog.findViewById(R.id.Edit_Text_Set_Number_of_Decks); //Initialize for Button set_deck = (Button) deck_dialog.findViewById(R.id.Button_Deck); //-----[ Setting onClickListener() ]----- //Set Event Listener for Image view draw_card.setOnClickListener(new Draw_Card_Model()); //Set Event Listener for Setting the Deck set_deck.setOnClickListener(new OnClickListener() { public void onClick(View v) { if(card_multiplier <= 8) { //Use "Integer.parseInt()" method to instantly convert from String to int value. card_multiplier = Integer.parseInt(enter_no_of_decks.getText().toString()); //Shuffling cards... pile = new Pile(card_multiplier); //Multiply no. of decks //Dismiss or close the dialog. deck_dialog.dismiss(); } else { Toast.makeText(getApplicationContext(), "Please choose a number from 1 to 8.", Toast.LENGTH_SHORT).show(); } } }); //Show dialog. deck_dialog.show(); } //Shuffling the Array public void Shuffle_Cards(Integer[][] Shuffle_Deck) { Random random = new Random(); for(int i = Shuffle_Deck[no_of_cards].length - 1; i >=0; i--) { int Index = random.nextInt(i + 1); //Simple Swapping Integer swap = Shuffle_Deck[card_multiplier-1][Index]; Shuffle_Deck[card_multiplier-1][Index] = Shuffle_Deck[card_multiplier-1][i]; Shuffle_Deck[card_multiplier-1][i] = swap; } } //Private Class for Random Card Draw private class Draw_Card_Model implements OnClickListener { public void onClick(View v) { //Just printing the card drawn from pile int suit = 0, value = 0; String strSuit = "", strValue = ""; draw_deck draw = new draw_deck(context); //This line is where issued the Null Pointer Exception. if (count == card_multiplier*52) { // A message shows up when all cards are draw out. Toast.makeText(getApplicationContext(), "All cards have been used up.", Toast.LENGTH_SHORT).show(); draw_card.setEnabled(false); } else { draw.draw(suit, value, strSuit, strValue, pile, context); count_label.setText(count); //This is where I got force closed error, although "int count" have initialized the number. This was supposed to accept in the setText() method. count++; } } } } Take note that the issues on Null Pointer Exception is the Image View and the Edit Text. I got to test it. Thanks. If you have any info about my question, let me know it frankly.

    Read the article

  • Mail.app Bug -- Keeps Showing Messages

    - by yodie
    Hi, I'm running Mail.app on my Mac (Snow Leopard). Two GMail accounts are linked to it using POP. There is an annoying bug which causes certain messages from one of the account to show up in my Inbox. They are always messages I sent to a certain account, and are 6-7 messages from one thread. If I delete them, they just show up again if I restart Mail.app or switch to a different mailbox and back, although the number of messages goes down, until it reaches one, and goes back to six-seven. The only solution I have found is to delete the offending thread from within GMail, except that then another thread takes its place and starts annoying me. Any solution?

    Read the article

  • Fast Bookmarking In Firefox

    - by Kije
    Making bookmarks in Firefox has become tedious. Can any one point me to a bookmarking extension that works as follows... Decide you want to bookmark a page Left click your way to the target bookmark folder Right the target bookmark folder to get a "Bookmark this page here" option. (It is this "Bookmark this page here" add on that I am looking for) (Edit the book mark title tags etc) Click done Currently you have to: Decide you want to bookmark a page Click on the bookmarks menu pulldown Click on "bookmark this page" Click on the "folder" pulldown Click on "Bookmarks tool bar" or "Bookmarks menu" Left click your way to the target bookmark folder (in a teeny window that that doesn't move the focus as you expand folders) (Edit the book mark title tags etc) Click "Done" That would be four (or five) steps to replace the seven (or eight) steps to make a bookmark in an existing folder. @Chris I assume you are referring me to "Read It Later" http://www.ideashower.com/ideas/launched/read-it-later/ I'll take a look.

    Read the article

  • JavaOne 2012 Conference Preview

    - by Janice J. Heiss
    A new article, by noted freelancer Steve Meloan, now up on otn/java, titled “JavaOne 2012 Conference Preview,” looks ahead to the fast approaching JavaOne 2012 Conference, scheduled for September 30-October 4 in San Francisco. The Conference will celebrate and highlight one of the world’s leading technologies. As Meloan states, “With 9 million Java developers worldwide, 5 billion Java cards in use, 3 billion mobile phones running Java, 1 billion Java downloads each year, and 100 percent of Blu-ray disk players and 97 percent of enterprise desktops running Java, Java is a technology that literally permeates our world.”The 2012 JavaOne is organized under seven technical tracks:* Core Java Platform* Development Tools and Techniques* Emerging Languages on the JVM* Enterprise Service Architectures and the Cloud* Java EE Web Profile and Platform Technologies* Java ME, Java Card, Embedded, and Devices* JavaFX and Rich User ExperiencesConference keynotes will lay out the Java roadmap. For the Sunday keynote, such Oracle luminaries as Cameron Purdy, Vice President of Development; Nandini Ramani, Vice President of Engineering, Java Client and Mobile Platforms; Richard Bair, Chief Architect, Client Java Platform; and Mark Reinhold, Chief Architect, Java Platform will be presenting.For the Thursday IBM keynote, Jason McGee, Distinguished Engineer and Chief Architect for IBM PureApplication System, and John Duimovich, Java CTO and IBM Distinguished Engineer, will explore Java and IBM's cloud-based initiatives.All in all, the JavaOne 2012 Conference should be as exciting as ever.Link to the article here. Originally published on blogs.oracle.com/javaone.

    Read the article

  • JavaOne 2012 Conference Preview

    - by Janice J. Heiss
    A new article, by noted freelancer Steve Meloan, now up on otn/java, titled “JavaOne 2012 Conference Preview,” looks ahead to the fast approaching JavaOne 2012 Conference, scheduled for September 30-October 4 in San Francisco. The Conference will celebrate and highlight one of the world’s leading technologies. As Meloan states, “With 9 million Java developers worldwide, 5 billion Java cards in use, 3 billion mobile phones running Java, 1 billion Java downloads each year, and 100 percent of Blu-ray disk players and 97 percent of enterprise desktops running Java, Java is a technology that literally permeates our world.” The 2012 JavaOne is organized under seven technical tracks: * Core Java Platform* Development Tools and Techniques* Emerging Languages on the JVM* Enterprise Service Architectures and the Cloud* Java EE Web Profile and Platform Technologies* Java ME, Java Card, Embedded, and Devices* JavaFX and Rich User Experiences Conference keynotes will lay out the Java roadmap. For the Sunday keynote, such Oracle luminaries as Cameron Purdy, Vice President of Development; Nandini Ramani, Vice President of Engineering, Java Client and Mobile Platforms; Richard Bair, Chief Architect, Client Java Platform; and Mark Reinhold, Chief Architect, Java Platform will be presenting. For the Thursday IBM keynote, Jason McGee, Distinguished Engineer and Chief Architect for IBM PureApplication System, and John Duimovich, Java CTO and IBM Distinguished Engineer, will explore Java and IBM's cloud-based initiatives.All in all, the JavaOne 2012 Conference should be as exciting as ever. Link to the article here.

    Read the article

  • Microsoft Tag Tagged Me

    - by Brian Schroer
    I got EXTREMELY lucky last week and won an HP Mini 311 notebook from a Microsoft Tag Twitter contest. I did my required tweet to enter last Tuesday, and one hour later received notification that I had won the weekly drawing. Apparently you can tweet up to 500 times (I pity the followers of those who do that), so it was really lucky that I won, and I sympathize with those who had been really trying. If you would like to try your luck, there are seven weekly prizes left, and you can find out about the contest here: http://tag.microsoft.com/ttcontest.aspx For a free PC, I thought it was the least I could do to find out what Microsoft Tag is. I was vaguely aware of those pastel-y triangle-y square things that look like someone put one of Don Johnson’s Miami Vice outfits through a shredder, and knew that the company I work for (one of the world’s largest consumer products companies) was looking into putting them on our products, packaging and advertising, but didn’t know much more about the technology. I thought they were just an improvement over bar codes, and would be used in retail store scanners, but I was mistaken. These tags are meant to be scanned by consumers using their mobile phones, to get instant access to information, websites, reviews, etc. Scanning a tag can open a web page, import a contact card, or dial a phone number, play a video… Tag reader software can be installed on Windows Mobile, iPhone, Symbian, Blackberry, Android, J2ME, and other phones (and I suspect that it will be available for Windows Phone 7 also :). There are built-in tracking, metrics and analysis tools, to help companies using Tag make decisions about their marketing expenditures. (And they don’t have to look Miami Vice-y – They can be customized to reflect the personality of the person or a brand.) Looks like interesting stuff. You can find out more at http://tag.microsoft.com.

    Read the article

  • Replacing files in a folder structure with files from an unsorted folder

    - by Andrew
    I have over 50,000 PDFs organized into folders in a file called PDFACT. I needed to compress these files so I ran them through Adobe to batch compress them and this worked—except Adobe could only output the files without their folder structure. So basically I have 50,000 PDFs set up in a folder with hundreds of subfolders, and everything was organized. I ended up with one folder with 50,000 compressed PDFs in it, just in alphabetical order. Somehow I need to replace all the orginal PDFs with their compressed copies. Let me give an example: In the folder PDFACT we have the following file: C:\PDFACT\BIG DINNER\BILL\NEWESTBILL.PDF … and in the output folder that Adobe created we have just: C:\COMPRESSED_PDF_FOLDER\NEWESTBILL.PDF This copy is smaller then the one in PDFACT and has the same name but it is just lumped in with every other PDF. The folder structure and subfolders are gone. Is there any way to replace all the larger uncompressed PDFS inside the orginal folder structure with their now compressed counterparts?

    Read the article

  • Model View Control Issue: Null Pointer Initialization Question [closed]

    - by David Dimalanta
    Good morning again. This is David. Please, I need an urgent help regarding control model view where I making a code that uniquely separating into groups: An Activity Java Class to Display the Interface A View and Function Java Class for Drawing Cards and Display it on the Activity Class The problem is that the result returns a Null Pointer Exception. I have initialize for the ID for Text View and Image View. Under this class "draw_deck.java". Please help me. Here's my code for draw_deck.java: package com.bodapps.inbetween.model; import android.content.Context; import android.view.View; import android.widget.ImageView; import android.widget.TextView; import com.bodapps.inbetween.R; public class draw_deck extends View { public TextView count_label; public ImageView draw_card; private int count; public draw_deck(Context context) { super(context); // TODO Auto-generated constructor stub //I have initialized two widgets for ID. I still don't get it why I got forced closed by Null Pointer Exception thing. draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); count_label = (TextView) findViewById(R.id.Text_View_Count_Card); } public void draw(int s, int c, String strSuit, String strValue, Pile pile, Context context) { //super(context); //Just printing the card drawn from pile int suit, value = 1; draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); count_label = (TextView) findViewById(R.id.Text_View_Count_Card); Card card; if(!pile.isEmpty()) //Setting it to IF statement displays the card one by one. { card = pile.drawFromPile(); //Need to check first if card is null. if (card != null) { //draws an extra if (card != null) { //Get suit of card to print out. suit = card.getSuit(); switch (suit) { case CardInfo.DIAMOND: strSuit = "DIAMOND"; s=0; break; case CardInfo.HEART: strSuit = "HEART"; s=1; break; case CardInfo.SPADE: strSuit = "SPADE"; s=2; break; case CardInfo.CLUB: strSuit = "CLUB"; s=3; break; } //Get value of card to print out. value = card.getValue(); switch (value) { case CardInfo.ACE: strValue = "ACE"; c=0; break; case CardInfo.TWO: c=1; break; case CardInfo.THREE: strValue = "THREE"; c=2; break; case CardInfo.FOUR: strValue = "FOUR"; c=3; break; case CardInfo.FIVE: strValue = "FIVE"; c=4; break; case CardInfo.SIX: strValue = "SIX"; c=4; break; case CardInfo.SEVEN: strValue = "SEVEN"; c=4; break; case CardInfo.EIGHT: strValue = "EIGHT"; c=4; break; case CardInfo.NINE: strValue = "NINE"; c=4; break; case CardInfo.TEN: strValue = "TEN"; c=4; break; case CardInfo.JACK: strValue = "JACK"; c=4; break; case CardInfo.QUEEN: strValue = "QUEEN"; c=4; break; case CardInfo.KING: strValue = "KING"; c=4; break; } } } }// //Below two lines of code, this is where issued the Null Pointer Exception. draw_card.setImageResource(deck[s][c]); count_label.setText(new StringBuilder(strValue).append(" of ").append(strSuit).append(String.valueOf(" " + count++)).toString()); } //Choice of Suits in a Deck public Integer[][] deck = { //Array Group 1 is [0][0] (No. of Cards: 4 - DIAMOND) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 2 is [1][0] (No. of Cards: 4 - HEART) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 3 is [2][0] (No. of Cards: 4 - SPADE) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 4 is [3][0] (No. of Cards: 4 - CLUB) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, }; } And this one of the activity class, Player_Mode_2.java: package com.bodapps.inbetween; import java.util.Random; import android.app.Activity; import android.app.Dialog; import android.content.Context; import android.os.Bundle; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.EditText; import android.widget.ImageView; import android.widget.TextView; import android.widget.Toast; import com.bodapps.inbetween.model.Card; import com.bodapps.inbetween.model.Pile; import com.bodapps.inbetween.model.draw_deck; /* * * Public class for Two-Player mode. * */ public class Player_Mode_2 extends Activity { //Image Views private ImageView draw_card; private ImageView player_1; private ImageView player_2; private ImageView icon; //Buttons private Button set_deck; //Edit Texts private EditText enter_no_of_decks; //text Views private TextView count_label; //Integer Data Types private int no_of_cards, count; private int card_multiplier; //Contexts final Context context = this; //Pile Model public Pile pile; //Card Model public Card card; //create View @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.play_2_player_mode); //-----[ Search for Views ]----- //Initialize for Image View draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); player_1 = (ImageView) findViewById(R.id.IV_Player_1_Card); player_2 = (ImageView) findViewById(R.id.IV_Player_2_Card); //Initialize for Text view or Label count_label = (TextView) findViewById(R.id.Text_View_Count_Card); //-----[ Adding Values ]----- //Integer Values count = 0; no_of_cards = 0; //-----[ Adding Dialog ]----- //Initializing Dialog final Dialog deck_dialog = new Dialog(context); deck_dialog.setContentView(R.layout.dialog); deck_dialog.setTitle("Deck Dialog"); //-----[ Initializing Views for Dialog's Contents ]----- //Initialize for Edit Text enter_no_of_decks = (EditText) deck_dialog.findViewById(R.id.Edit_Text_Set_Number_of_Decks); //Initialize for Button set_deck = (Button) deck_dialog.findViewById(R.id.Button_Deck); //-----[ Setting onClickListener() ]----- //Set Event Listener for Image view draw_card.setOnClickListener(new Draw_Card_Model()); //Set Event Listener for Setting the Deck set_deck.setOnClickListener(new OnClickListener() { public void onClick(View v) { if(card_multiplier <= 8) { //Use "Integer.parseInt()" method to instantly convert from String to int value. card_multiplier = Integer.parseInt(enter_no_of_decks.getText().toString()); //Shuffling cards... pile = new Pile(card_multiplier); //Multiply no. of decks //Dismiss or close the dialog. deck_dialog.dismiss(); } else { Toast.makeText(getApplicationContext(), "Please choose a number from 1 to 8.", Toast.LENGTH_SHORT).show(); } } }); //Show dialog. deck_dialog.show(); } //Shuffling the Array public void Shuffle_Cards(Integer[][] Shuffle_Deck) { Random random = new Random(); for(int i = Shuffle_Deck[no_of_cards].length - 1; i >=0; i--) { int Index = random.nextInt(i + 1); //Simple Swapping Integer swap = Shuffle_Deck[card_multiplier-1][Index]; Shuffle_Deck[card_multiplier-1][Index] = Shuffle_Deck[card_multiplier-1][i]; Shuffle_Deck[card_multiplier-1][i] = swap; } } //Private Class for Random Card Draw private class Draw_Card_Model implements OnClickListener { public void onClick(View v) { //Just printing the card drawn from pile int suit = 0, value = 0; String strSuit = "", strValue = ""; draw_deck draw = new draw_deck(context); //This line is where issued the Null Pointer Exception. if (count == card_multiplier*52) { // A message shows up when all cards are draw out. Toast.makeText(getApplicationContext(), "All cards have been used up.", Toast.LENGTH_SHORT).show(); draw_card.setEnabled(false); } else { draw.draw(suit, value, strSuit, strValue, pile, context); count_label.setText(count); //This is where I got force closed error, although "int count" have initialized the number. This was supposed to accept in the setText() method. count++; } } } } Take note that the issues on Null Pointer Exception is the Image View and the Edit Text. I got to test it. Thanks. If you have any info about my question, let me know it frankly.

    Read the article

  • Oracle Financials In the News

    - by Di Seghposs
    Coming off of OpenWorld and all the excitement around Oracle’s “Cloud” strategy, we thought we’d share what others had to say recently about Oracle’s financial solutions in and out of the cloud: Information Management, the educated reader’s choice for the latest news, commentary and feature content serving the information technology and business community, had an interesting blog post from Bill McNee of Saugatuck Technology, entitled, “A Bull Market for Finance Cloud Apps”. In the post, he highlights Oracle as one of the ‘significant players’ in the space… Oracle: As recently announced, Oracle is now aggressively marketing its Oracle Fusion Financials Cloud Service to midsize and large enterprise customers. While we anticipate that this solution set will primarily appeal to a portion of the existing Oracle customer footprint, rather than taking share from competitors, it is embedding some strong mobile and social capabilities that should help it gain traction. Read the full article - “A Bull Market for Finance Cloud Apps” Ventana Research, a leading benchmark research and advisory services firm, made mention to Oracle Fusion Financials in a recent blog post. While we all know ‘boring is cool’, it was cool to see Robert Kugel, SVP Research, discussing Oracle’s Fusion Financials strategy. Here’s some excerpts: “For at least the next five years I believe Oracle has a good strategy, because the transition from the existing Oracle ERP offerings to Fusion Financials can be less painful than similar migrations…” “Deploying Fusion GL can facilitate a more consistent and faster way to execute finance department functions.” “Fusion Financials is the go-forward accounting and financial applications suite that will coexist…” “Whether or not it’s time to migrate, I think all users of Oracle’s E-Business Suite, Oracle Applications, PeopleSoft and JD Edwards software should consider Fusion GL as part of an ongoing program to extract more value from their core financial systems.” Read the full article - “Oracle Fusion Financials: Boring is Cool”

    Read the article

  • Rant - Why is Windows Azure not available in Africa?

    - by Allan Rwakatungu
    Yesterday at the .NET user group meeting in Kampala Uganda  I gave a talk on cloud computing with Windows Azure  (details will be in my next blog post). The guys where excited. Without owning they own inftrastucture and at low cost they can build scalable , highly available applications. Not quite. Azure accounts are only available to people in particular countries - none from Africa. I attended PDC in 2008 when Microsoft unleashed Windows Azure. One of the case studies to show the benefits ofr cloud computing was a project in Africa for an education service in Ethiopia. The point they where making was that the cloud was perfect for scenarios where computing infrastructure is not sophiscated, like Ethiopia. Perfect , i thought. So i got my beta account from PDC and started playing around in the cloud. Then Azure goes live , my beta account does not work any more and I cant pay because am from Uganda. Microsoft , this sucks. I dont know the reasons for Microsoft doing this, but am sure we can work out something. We in Africa need the cloud more than anybody else in the world. Setting up data centers that are higly scalable and available for our startups is not an option we have. But we also cant pay for cloud computing with Microsoft. Microsoft, we know we are a tiny insigficant market for a company your size, but your excluding us only continues to widen the digital divide. Microsoft , how about you have a reseller model for cloud computing. Instead of trying to deal direclty with each client you have local partners who help you sell and bill your cloud services. I think that would lead to Windows Azure being available in Africa. I can help you resell in Uganda.

    Read the article

  • How can I change a video container without re-encoding or compressing the file?

    - by GiH
    When I ripped my Kill Bill DVD I used handbrake and put it into a single avi. I realize that I didn't get the subtitles, so what I want to do is convert the AVI to MKV and put the subtitles in the mkv. How do I go about doing this without losing any qualityI don't care about compressing or anything ju? I don't care about compressing or anything, just want to change the container. If handbrake can do it, I'd prefer to use that since I already have it.

    Read the article

  • Ideal data structure/techniques for storing generic scheduler data in C#

    - by GraemeMiller
    I am trying to implement a generic scheduler object in C# 4 which will output a table in HTML. Basic aim is to show some object along with various attributes, and whether it was doing something in a given time period. The scheduler will output a table displaying the headers: Detail Field 1 ....N| Date1.........N I want to initialise the table with a start date and an end date to create the date range (ideally could also do other time periods e.g. hours but that isn't vital). I then want to provide a generic object which will have associated events. Where an object has events within the period I want a table cell to be marked E.g. Name Height Weight 1/1/2011 2/1/2011 3/1/20011...... 31/1/2011 Ben 5.11 75 X X X Bill 5.7 83 X X So I created scheduler with Start Date=1/1/2011 and end date 31/1/2011 I'd like to give it my person object (already sorted) and tell it which fields I want displayed (Name, Height, Weight) Each person has events which have a start date and end date. Some events will start and end outwith but they should still be shown on the relevant date etc. Ideally I'd like to have been able to provide it with say a class booking object as well. So I'm trying to keep it generic. I have seen Javasript implementations etc of similar. What would a good data structure be for this? Any thoughts on techniques I could use to make it generic. I am not great with generics so any tips appreciated.

    Read the article

  • How is the Ubuntu installation supposed to work?

    - by Bob D
    I have given up on installing Ubuntu 12.04.01 for the sixth time. I finally got Windows XP to work again. So I blitzted the Ubuntu partition and the swap partition and was about to install the sixth try when it occurred to me that ought to ask how is is "supposed" to go. My installer will install Ubuntu on the Linus ext4 partition I created by hand in Windows on my C drive. But the installer keeps insisting on installing the OS on my D drive unless I intervene. So if I choose "do something else" it will accept installing Ubuntu on the C drive in the partition I previously created, but it insists on putting the "Device for boot loader installation" on the D drive. I can select a different drive at this point (where I could not with the "along side windows choice) but what drive to I choose??? It lists sda, sda1, sda5, sdb and sdb1. The five times before this all ended in disaster letting the installer choose. So I need human intervention. Where is the safe place to do this. The results from the previous attempts left me with only the Ubuntu that would boot, the boot to windows from the grub menu failed every time. Is there a better version of Ubuntu I can use? Is V12.04.01 messed up? My goal is still to use Wine on it to run PC programs. I would like to find a shell or skin or something that makes it seem like windows but have the security and power of Linux under the good. I have seen this type of system and it worked very well. I know I am getting long winded but I have been though at least four of the seven rings of hell already, so I want this install to be the last.

    Read the article

  • Tree Surgeon 2.0 - The future on the T4 Express

    - by Malcolm Anderson
    If you've never been a fan of TreeSurgeon (http://treesurgeon.codeplex.com/) then skip this post.However, if have been there have been some interesting developments over the last couple of years.The biggest one is T4Recently Bill Simser wrote a detailed post about the potential future of tree surgeon, called "Tree Surgeon - Alive and Kicking or Dead and Buried" He raised the question:Times have changed. Since that last release in 2008 so much has changed for .NET developers. The question is, today is the project still viable? Do we still need a tool to generate a project tree given that we have things like scaffolding systems, NuGet, and T4 templates. Or should we just give the project its rightful and respectful send off as its had a good life and has outlived its usefulness.For myself, the answer is, keep it.I've spent the last couple of years doing agile engineering coaching and architecture and from my experience, I can tell you, there are a lot of shops out there that would benefit from having Tree Surgeon as a viable product.  Many would benefit simply from having the software engineering information that is embedded in the tree surgeon site be floating around their conversation.Little things like, keep all of your software needed to run the build, with the build in the version control system.Have your developers and the build system using the same build.Have a one-touch buildSeparate your code from your interfacePut unit tests in first, not lastI've seen companies with great developers suffer from the problems that naturally come from builds taking 3 and 4 hours to run.  It takes work to get that build down to 10 minutes, but the benefits are always worth it.  Tree Surgeon gives you a leg up, by starting you off with a project that you can drop into your Continuous Integration system, right out of the box.Well, it used to be right out of the box.  Today, you have to play with the project to make it work for you, but even with the issues (it hasn't been updated since 2008) it still gives you a framework, with logical separations that you can build from.If you have used Tree Surgeon in the past, take a few minutes and drop a comment about what difference it made in your development style, and what you are doing differently today because of it.

    Read the article

  • Is it better to always purchase as much as higher in Watts SMPS, for PC?

    - by metal gear solid
    Is it better to always purchase as much as higher in Watts SMPS, for PC? Does higer watts SMPS also consume more power (electricity bill)? How to know how much watts of SMPS we should purchase? What are factor who decide how much watt of power will need? I'm going to purchase a new Motherboard + CPU + HDD + RAM + DVD Wrtiter + SATA 500 GB HDD ? I'm not purchasing any external Graphic Card. How to decide which watt of SMPS ,I should purchase?

    Read the article

  • Can dd-wrt or tomato keep track of GB usage per billing period per device?

    - by Sam Hasler
    I want to be able to track the usage of each device connecting to our router so we can split up the ISP bill by usage. Can dd-wrt or tomato provide the stats I'd need to do this? Update: After a bit of googling I'm aware of a much better answer than the current one. However I suspect there's probably more answers out there for other firmwares so in the interests of getting a more diverse set of answers—­and, I'll admit, because I'm getting tired of reading through obtuse firmware documentation—I've put up a bounty. If the only answer added is the one I've found I'll be happy to accept it for the bounty, otherwise I'll add it and accept it myself, but I'm hoping for an even better answer, or at least some options for other firmwares as from looking I've seen a few other people have asked for this and there doesn't appear to be a definitive answer, let's make this it! Go lazywebs! (Sorry. I've always wanted to say that.)

    Read the article

  • Changes to talk/ytalk or alternative chat in the Linux terminal

    - by cascaval
    While looking for a piece of software that provides chat between 2 Linux server users logged in the terminal, I tried talk/ytalk. Unfortuntaley it provides chat between users on separate walls (each user has its own wall) and the messages lack timestamps. Is it possible to set it up so that at least timestamps are provided? Alternatively, is there any other software that could provide one wall on which users write messages prepended with time? Simple chat with messages listed in the order of submission would be ideal: 13:05:48 [bridgekeeper@...]: What is the air-speed velocity of an unladen swallow? 13:06:28 [cascaval@...]: What do you mean? An African or European swallow? I already tried wall and write but they don't fit the bill. OS: Debian 6.0

    Read the article

  • Most effective way to do daily standup meeting when a few people are remote

    - by Burhan Ali
    I am a software developer in a small team of seven. We are not an Agile (with a big 'A') team but are experimenting with some aspects of agile. One of these is the daily "standup" meeting. The difficulty here is that for two days of the week we have at least one person working from home so the full team isn't available in the same room. What is the best way to carry out a daily standup in this situation? Some facts that may be relevant: We all work in a single open plan room. We use Skype in our company. We don't have any video conferencing capability. We all work the same hours so there are no timezone complexities involved. The development manager is one of the people who works from home one day a week. Things we have tried: Conference call using Skype: This is tricky for those in the office because you can hear people speak in the room and then a split second later through the headset. This can e very distracting. Conference phone: Awful experience. Hard to get them to work and poor quality audio. Text-based updates using Skype. This is not as engaging and is no different than just firing off a status email in the morning. I have seen other questions about remote collaboration but they are mainly about completely remote teams and/or teams that span multiple time zones. We are not affected by either of these problems. What can we do to make our standup meetings better in these circumstances?

    Read the article

  • MySQL won't stop doing stuff

    - by Felix
    Sorry for the title of the question, here's my problem: I've been trying to set up some scripts that import a lot of stuff hourly from an external source. They seemed to work fine, so I set up a cronjob to run them every hour. One day later I find six or seven instances of that script just hogging the MySQL server, making it unresponsive. I killed their processes, but MySQL was still not responding. I had to kill MySQL, reboot and then MySQL started working again (who knows on what) and being unresponsive (yes, I did remove the scripts from the cronjobs). I SHOW PROCESSLISTed and killed every process I could find. Still nothing, MySQL is hogging the HDD and is at the top of top and making the server load go up in the sky. I don't know what to do, if I kill and start it again it will probably do the same thing. What should I do?

    Read the article

  • ArchBeat Link-o-Rama for 2012-09-25

    - by Bob Rhubart
    Oracle 11gR2 RAC on Software Defined Network (SDN) | Gilbert Stan "The SDN [software defined network] idea is to separate the control plane and the data plane in networking and to virtualize networking the same way we have virtualized servers," explains Gil Standen. "This is an idea whose time has come because VMs and vmotion have created all kinds of problems with how to tell networking equipment that a VM has moved and to preserve connectivity to VPN end points, preserve IP, etc." H/T to Oracle ACE Director Tim Hall for the recommendation. ServerSent-Events on WebLogic Server | Steve Buttons "The HTML5 ServerSent-Event model provides a mechanism to allow browser clients to establish a uni-directional communication path to a server, where the server is then able to push messages to the browser at any point in time," explains Steve "Buttso" Buttons. Focus on Architects and Architecture This handy guide for sessions and other activities at Oracle OpenWorld 2012 focuses on IT architecture in all its many facets and permutations. Operating System Set-up for WebLogic Server | Rene van Wijk Oracle ACE Rene van Wijk shows you how to set-up an operating system for WebLogic Server. "We will use VMware as our virtualization platform and use CentOS as the operating system," says van Wijk. "We end the post by showing how the operating system can be tuned when running a Java process such as WebLogic Server." Free eBook: Oracle SOA Suite - In the Customer's Words If you find yourself in the position of having to sell the idea of Service-oriented Architecture to business stakeholders this free e-book may come in very handy. Check out "Oracle SOA Suite: In the Customer's Words. (Registration / Oracle.com login required.) Thought for the Day "The first rule of any technology used in a business is that automation applied to an efficient operation will magnify the efficiency. The second is that automation applied to an inefficient operation will magnify the inefficiency." — Bill Gates Source: BrainyQuote.com

    Read the article

  • Outlook Replies with Inline Comments

    - by BillN
    I have a user who uses Word as his e-mail editor. Often when replying to an e-mail, he'll insert his comments into the body of the original e-mail. Since he is using Word as the editor, these show as [User Name] Comment Text in a contrasting color. However, some users see the comments in their Outlook, and others do not. I've tried Selecting/DeSelecting Word as the e-mail editor on the recipients, and it does not seem to make a difference. We are using Exchange 2007 with Outlook 2003 and Outlook 2007 clients along with a few Entourage Clients. There does not seem to be a pattern related to which client is used, but Entourage seems to be more likely to have the problem. TIA, Bill

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >