Search Results

Search found 3293 results on 132 pages for 'comodo firewall'.

Page 42/132 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • Dual Nic, one keeps dropping

    - by user1215018
    I'm running windows server 2008 r2 on a dell poweredge 2850. I have 2 NICs, one is configured behind a firewall with a dhcp server on the main local LAN and another one has it's own dedicated connection to one of our 13 static IPs. So in a nutshell we have 2 of our static IPs going to this server, one indirectly through a firewall/dhcp server, and the other directly. I am trying to reach IIS on port 80 and port 443. The problem is that the NIC with the direct connection (NIC2) keeps dropping and says either "No internet connection" or "Unauthenticated". However, the NIC behind the firewall (NIC1) has no problems at all. Update: This is the second time this has happened in 3 days and each time the fix has been enabling the dhcp client on the NIC, allowing it to error out to a 169.x.x.x address, then re-enabling the nic with it's static IP assignment.

    Read the article

  • Inexpensive Remote Assistance software?

    - by Jess
    Any recommendations for Remote Assistance software that does not require firewall modification for clients? To assist client with software problems and perform training, we currently use a tool called Remote Helpdesk to connect to their computers and guide them through the process. This tool was pretty cheap (~$400 onetime for 3 support staff), and worked great - the client's PC actually initiates the connection to us, so there's never any firewall issues (vs. Remote Desktop, VNC software, or many other similar tools). Unfortunately, the product doesn't work well with 64-bit O/S's and Vista in general (slows down by a factor of 10 or so). I am looking for alternatives that provide the same reverse connection capabilities to avoid firewall issues. The only solution I've found is WebEx's Remote Support, which is WAY too expensive ($449/month for us). Thanks for all the assistance!

    Read the article

  • AT&T U-verse 2Wire Router - Increase session table limit?

    - by caleban
    AT&T U-verse VDSL "fiber to the node" 24Mbit down / 3Mbit up 2Wire Router Model 3800HGV-B Software Version 6.1.9.24-enh.tm The 2Wire router appears to have a limit of 1024 TCP and UDP sessions. This limit appears to apply to all sessions regardless of any static IP, firewall off, DMZ plus, secondary router configurations. I've tried using the 2Wire router alone and also configuring the 2Wire static IP addressing, firewall off, DMZ plus, etc. setup along with my own pfSense router/firewall. Either way it appears I exceed the 1024 session limit and sessions start being reset. Running out of sessions isn't being caused by torrents or p2p etc. We're a business and our legitimate uses are exceeding this session limit. AT&T tells me it's not possible to bridge the router or increase or avoid the session table limit. I'm curious if anyone has found a way around either of these issues.

    Read the article

  • Is this a common/bug on this PPPoE setting for Cisco ASA 5505?

    - by DCAlliances
    We have to change the way the firewall setup due to we've changed the internet provider. The way we setup we have ADSL modem and we have to do a full bridge mode and the firewall configuration has to change from Static IP to Use PPPoE option on Outside interface with PPPoE username and password, CHAP authentication, WAN IP and WAN subnet mask. [See the attachment] It's been working ok with the use of PPPoE option however the issue is that if we un-plug the power cable of the firewall. This "Outside" interface turned to blank - NO WAN IP, PPPoE username and password. So basically, we have to retype this information again. Is this common or a bug? Any ideas? Thanks

    Read the article

  • Not able to connect to a mac client from a windows machine

    - by Manish
    I have a Server.exe file which I use to connect to a mac.(I am fairly confident that server.exe is not buggy ).When i try to do this I get this often cited error "No connection could be made because the target machine actively refused it " I did search some existing questions about this on the forum and it looked like this might be a firewall issue.FWIW I dont have any firewall set on my mac (client) and on my server machine (Windows 7 64 bit ) under the firewall settings I have :- Incoming connections : Block all connections to programs that are not on the list of allowed programs. Active Domain Networks: Same domain as the one which my client is on. Windows Firewire State: Off. Do you think i need to change something here?Can someone help me with next steps?

    Read the article

  • What ssh command would I use to set up "backwards listening"

    - by Nathan
    Machine A is behind a firewall. I have physical access to it, but I want to log into it remotely, and I do not have access to the firewall settings. Machine B is remote, and not behind any firewall. (It's my linode) Machine C is the mobile device I'm going to attempt to ssh into A from. Is there an ssh command that I can run from machine A that connects to machine B and stays open, that will allow me to log into A from C, via B? From the manual I'd guess it would be to run the follwing on A ssh -R *:9999:localhost:22 me@B and then run this on C ssh me@B -p 9999 but the previous command reports "Connection refused."

    Read the article

  • Microsoft Office 2007

    - by nardone25
    Hello everyone in serverfault. I am having a big problem at my job. I will let everyone know what I am using. I have two ibm x3690 servers with vmware esxi on both. Our product server has 8 vm on there. I have two lefthand san from HP. I have a watchgurd firewall. Our other site. I have one server over there ibm x3b90 sever. with one vm on there. I have a cisco 1700 router. and another watchgurd firewall. I have a vpn tunnel to my watchgurd firewall, to my cisco router. Site one works great. site two is having problems saving word documents and having problems printing in publisher 2007. Can someone please help?

    Read the article

  • pfSense + DDoS Protection

    - by Jeremy
    I run a gaming community on a colo with a 100Mbps port. I want to buy a very cheap 35 dollar server with the same 100Mbps port, and run pfSense to use as a hardware firewall. I'm dealing with a bunch of 14 year old kids that have access to botnets, so it can become a bit necessary to get something like this. My overall question, is using pfSense on a cheap identical datacenter/port speed server worth it to actually block DDoS attacks? A bit more into detail since I assume you will ask this, the attacks we receive are normally around 1Gbps. We currently run CentOS using CSF Firewall, and even when using a software firewall, we block 500Mbps UDP floods, or just generic attacks pretty easily. Thanks, - Necro

    Read the article

  • create print server port via command line error Win 8

    - by Benjamin Jones
    I need to create a Print Server Port via commandline in Windows 8 Per Google search I should be using prnport.vbs script to do so: cscript c:\Windows\System32\Printing_Admin_Scripts\en-US\prnport.vbs -a -s \\192.168.113.253 -r Xerox_192.168.113.253 However I get this error: ** Unable to connect to WMI service Error 0x800706BA The RPC Server is unavailable. ** I looked at local services and both RPC and WMI services are started . Also I made sure add remote admin rule to Windows Firewall via command line without success!: netsh advfirewall firewall set rule group="windows management instrumentation (wmi)" new enable=yes netsh advfirewall firewall set rule group="remote administration" new enable=yes NOTE: If I use the GUI to create the print server port then add the printer via command line: rundll32 printui.dll,PrintUIEntry /if /b "Xerox WorkCenter 7535" /F C:\Windows\Inf\WC7545-7556_PCL6_x64_Driver\x2DNORX.inf /r "Xerox_192.168.113.253" /m "Xerox WorkCentre 7535 PCL6" THE PRINTER IS SUCCESSFULLY ADDED. So its NOT the printer it self! So how can I successfully add a print server port via command line? Thanks

    Read the article

  • Multiple External IP Ranges on a Juniper SSG5

    - by Sam
    I have a Juniper SSG 5 firewall in a datacenter. The first interface (eth0/0) has been assigned a static IP address and has three other addresses configured for VIP Nat. I have a static route configured at the lowest priority for 0.0.0.0/0 to my hosting company's gateway. Now I need to configure a second IP block. I have the IPs assigned to the second interface (eth0/1) which is in the same security zone and virtual router as the first. However, with this interface enabled I (a) can't initiate outbound sessions (browse the internet, ping, DNS lookup, etc) even though I can access servers behind the firewall just fine from the outside and (b) can't ping the management IP of the firewall/gateway. I've tried anything I can think of but I guess this is a little above my head. Could anyone point me in the right direction? Interfaces: ethernet0/0 xxx.xxx.242.4/29 Untrust Layer3 ethernet0/1 xxx.xxx.152.0/28 Untrust Layer3 Routes: http://i.stack.imgur.com/60s41.png

    Read the article

  • Windows host MIA on network

    - by andrewbadera
    I've had a machine effectively disappear off my home office network. 192.168.1.100 - Windows 7 laptop (on domain) - problem machine 192.168.1.42 - Windows 2008 server (domain controller) 192.168.1.101 - Windows 7 laptop (guest; not on domain) For some reason I am unable to ping, tracert or remote desktop to 192.168.1.100 from .42 or .101. I can remote between .42 and .101 no problem however. .100 cannot ping nor remote desktop to .42 or .101. Remote Desktop access is enabled on .100. I've opened the firewall rules. I've disabled the firewall domain profile. I've turned the firewall service off entirely. No matter what I do, the .100 host is unreachable by any other host on the network. I'm at my wit's end. Thanks in advance for any debug advice!

    Read the article

  • MySQL port 3306 blocked in csf yet can still telnet to port 3306 from external host

    - by Neek
    We have a Centos 6 VPS that was recently migrated to a new machine within the same web hosting company. It's running WHM/cPanel and has csf/lfd installed. csf is set up with mostly vanilla config. I'm no iptables expert, csf has not let me down before. If a port isn't in the TCP_IN list, it should be blocked on the firewall by iptables. My problem is that I can telnet to port 3306 from an external host, yet I think iptables ought to be blocking 3306 because of csf's rules. We are now failing a security check because of this open port. (this output is obfuscated to protect the innocent: www.ourhost.com is the host with the firewall problem) [root@nickfenwick log]# telnet www.ourhost.com 3306 Trying 158.255.45.107... Connected to www.ourhost.com. Escape character is '^]'. HHost 'nickfenwick.com' is not allowed to connect to this MySQL serverConnection closed by foreign host. So the connection is established, and MySQL refuses the connection due to its configuration. I need the network connection to be refused at the firewall level, before it reaches MySQL. Using WHM's csf web UI I can see 'Firewall Configuration' includes a fairly sensible TCP_IN line: TCP_IN: 20,21,22,25,53,80,110,143,222,443,465,587,993,995,2077,2078,2082,2083,2086,2087,2095,2096,8080 (lets ignore that I could trim that a little for now, my concern is that 3306 is not listed in that list) When csf is restarted it logs the usual slew of output as it sets up iptables rules, for example what looks like it blocking all traffic and then allowing specific ports like SSH on 22: [cut] DROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 [cut] ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:22 [cut] I can see that iptables is running, service iptables status returns a long list of firewall rules. Here is my Chain INPUT section from service iptables status, hopefully that's enough to show how the firewall is configured. Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 acctboth all -- 0.0.0.0/0 0.0.0.0/0 2 ACCEPT tcp -- 217.112.88.10 0.0.0.0/0 tcp dpt:53 3 ACCEPT udp -- 217.112.88.10 0.0.0.0/0 udp dpt:53 4 ACCEPT tcp -- 217.112.88.10 0.0.0.0/0 tcp spt:53 5 ACCEPT udp -- 217.112.88.10 0.0.0.0/0 udp spt:53 6 ACCEPT tcp -- 8.8.4.4 0.0.0.0/0 tcp dpt:53 7 ACCEPT udp -- 8.8.4.4 0.0.0.0/0 udp dpt:53 8 ACCEPT tcp -- 8.8.4.4 0.0.0.0/0 tcp spt:53 9 ACCEPT udp -- 8.8.4.4 0.0.0.0/0 udp spt:53 10 ACCEPT tcp -- 8.8.8.8 0.0.0.0/0 tcp dpt:53 11 ACCEPT udp -- 8.8.8.8 0.0.0.0/0 udp dpt:53 12 ACCEPT tcp -- 8.8.8.8 0.0.0.0/0 tcp spt:53 13 ACCEPT udp -- 8.8.8.8 0.0.0.0/0 udp spt:53 14 LOCALINPUT all -- 0.0.0.0/0 0.0.0.0/0 15 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 16 INVALID tcp -- 0.0.0.0/0 0.0.0.0/0 17 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 18 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:20 19 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:21 20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25 22 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:53 23 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 24 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:110 25 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:143 26 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:222 27 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443 28 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:465 29 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:587 30 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:993 31 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:995 32 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2077 33 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2078 34 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2082 35 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2083 36 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2086 37 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2087 38 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2095 39 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2096 40 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:8080 41 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:20 42 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:21 43 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:53 44 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:222 45 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:8080 46 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 47 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 48 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 49 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 50 LOGDROPIN all -- 0.0.0.0/0 0.0.0.0/0 What's the next thing to check?

    Read the article

  • how to stream audio and video files, but use any media player on Windows (without using Windows file

    - by RamyenHead
    I want to access and play media files on machine S (Windows XP) from machine C (Windows XP). Using Windows File Sharing ("share this folder" stuff), if it works, I would share the folder containing media files on machine S, and I would be able to play media files, sitting in front of C, using any media player I want. Windows somehow ensures that the remote files behave like local files. But Windows file sharing won't work for me, is there any alternative? If two machines were both Linux, I would install an SSH server on S and use Nautilus from C to access and play media files. The reason why I can't use Windows file sharing is, my campus use two different subnets, I have S and C on different subnets and it seems that the firewall governing the whole network in campus doesn't allow file sharing between different subnets. I tried changing Windows Firewall settings on S to allow C in, it still wouldn't work, so it must be the other firewall.

    Read the article

  • Web browsing is fast, but downloads are slow

    - by Ricket
    I work for a company on my university's campus, helping with general IT problems and some web development. But lately there has been a problem that has me and my boss completely stumped. We, plus one contractor, make up the entire IT department, so I'm reaching out to you for help. All around the office, we have wall jacks. These collect in a closet down the hall and all plug into a switch. This switch, along with our individual server jacks, plugs into another switch, and that switch plugs into our firewall hardware. Then the firewall is connected out to our campus network. Our campus internet is, well, very fast. I don't know exactly the terms, tiers, etc., but we have thousands of students and downloads can run as fast as 10 MB/s at night; uploads are sometimes even faster. I think we're practically ISP level. In short, I have a lot of faith that it is not the campus side of things that is causing a problem, combined with other evidence I'll mention in a moment. So our symptoms: web browsing is fast. Web pages, images, etc. load instantly. No problems there. But then when I go to download something, the download starts fast but very quickly (a matter of seconds) drops to nearly 0. Often it will actually drop to 0 and time out. This happens with even very small files, 1 MB or less. It smells to me like a QoS sort of thing. I'm not entirely sure, and I wanted to get your opinions first. My boss is hesitant to touch our firewall, much less let me touch it, and it was set up and is managed by a consultant remotely. These problems don't seem tied to a time of the day. I've tried downloads after 5:00 and still the same thing happens. From my desk, I can turn on my wireless adapter and pick up the campus wireless access point. If I unplug ethernet and connect to it, downloads are fast. This adds to my suspicion that it's limited to our company network. Also, a number of weeks ago the consultant upgraded our firewall firmware. Suddenly everything was very fast. I tested with downloads from Sun and speedtest.net and things were blazing fast, as they should be with our campus internet! It was wonderful, and I figured the slow speeds were an old firmware bug. In a matter of days, things steadily declined until they were back to the old symptoms. Oh, and we have antivirus installed on every computer, and we keep it up to date. Though I suppose the possibility is still there that someone could have spyware which is bogging down our internet, in which case what is the easiest/best way to find this out? (maybe this should go in a separate question) Thank you for your patience in reading all of this. Do you have any ideas as to what I can try? Is this something that you've experienced before? What sort of tools or methods can I use to try and diagnose the problem? P.S. everything here is Windows. Windows Server 2003 and 2008 on our servers, and Windows XP on employees' machines. Update: We are submitting a ticket to the university to just take a look and see if they see anything unusual and/or can suggestion methods for us to try and pinpoint our problem. Hopefully they'll be helpful! I'll update this to let you know what goes on. Update again: We found a hub (yes, a HUB) right between our campus connection and our firewall. It had only those two ethernet cables plugged into it, nothing else. After removing the hub, our speeds have jumped up to several mbps. However in talking with the campus, we got them to run a gigabit line to our firewall in place of the 100mbps line. As of friday, we are at about 65 mbps up and down (according to speedtest.net at 8am)!! Go NC State!!

    Read the article

  • Router 2wire, Slackware desktop in DMZ mode, iptables policy aginst ping, but still pingable

    - by skriatok
    I'm in DMZ mode, so I'm firewalling myself, stealthy all ok, but I get faulty test results from Shields Up that there are pings. Yesterday I couldn't make a connection to game servers work, because ping block was enabled (on the router). I disabled it, but this persists even due to my firewall. What is the connection between me and my router in DMZ mode (for my machine, there is bunch of others too behind router firewall)? When it allows router affecting if I'm pingable or not and if router has setting not blocking ping, rules in my iptables for this scenario do not work. Please ignore commented rules, I do uncomment them as I want. These two should do the job right? iptables -A INPUT -p icmp --icmp-type echo-request -j DROP echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all Here are my iptables: #!/bin/sh # Begin /bin/firewall-start # Insert connection-tracking modules (not needed if built into the kernel). #modprobe ip_tables #modprobe iptable_filter #modprobe ip_conntrack #modprobe ip_conntrack_ftp #modprobe ipt_state #modprobe ipt_LOG # allow local-only connections iptables -A INPUT -i lo -j ACCEPT # free output on any interface to any ip for any service # (equal to -P ACCEPT) iptables -A OUTPUT -j ACCEPT # permit answers on already established connections # and permit new connections related to established ones (eg active-ftp) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT #Gamespy&NWN #iptables -A INPUT -p tcp -m tcp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 6667 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 28910 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29900 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29901 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29920 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p udp -m udp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 6500 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27900 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27901 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 29910 -j ACCEPT # Log everything else: What's Windows' latest exploitable vulnerability? iptables -A INPUT -j LOG --log-prefix "FIREWALL:INPUT" # set a sane policy: everything not accepted > /dev/null iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP iptables -A INPUT -p icmp --icmp-type echo-request -j DROP # be verbose on dynamic ip-addresses (not needed in case of static IP) echo 2 > /proc/sys/net/ipv4/ip_dynaddr # disable ExplicitCongestionNotification - too many routers are still # ignorant echo 0 > /proc/sys/net/ipv4/tcp_ecn #ping death echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all # If you are frequently accessing ftp-servers or enjoy chatting you might # notice certain delays because some implementations of these daemons have # the feature of querying an identd on your box for your username for # logging. Although there's really no harm in this, having an identd # running is not recommended because some implementations are known to be # vulnerable. # To avoid these delays you could reject the requests with a 'tcp-reset': #iptables -A INPUT -p tcp --dport 113 -j REJECT --reject-with tcp-reset #iptables -A OUTPUT -p tcp --sport 113 -m state --state RELATED -j ACCEPT # To log and drop invalid packets, mostly harmless packets that came in # after netfilter's timeout, sometimes scans: #iptables -I INPUT 1 -p tcp -m state --state INVALID -j LOG --log-prefix \ "FIREWALL:INVALID" #iptables -I INPUT 2 -p tcp -m state --state INVALID -j DROP # End /bin/firewall-start Active ruleset: bash-4.1# iptables -L -n -v Chain INPUT (policy DROP 38 packets, 2228 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 844 542K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 38 2228 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 4 prefix `FIREWALL:INPUT' 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 38 2228 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 4 prefix `FIREWALL:INPUT' Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 1158 111K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Active ruleset: (after editing iptables into below sugested form) bash-4.1# iptables -L -n -v Chain INPUT (policy DROP 2567 packets, 172K bytes) pkts bytes target prot opt in out source destination 49 4157 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 412K 441M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2567 172K LOG all -- * * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 4 prefix `FIREWALL:INPUT' 0 0 DROP icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 8 Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 312K packets, 25M bytes) pkts bytes target prot opt in out source destination ping and syslog simultaneous screenshots from phone (pinger) and from laptop (being pinged) http://dl.dropbox.com/u/4160051/slckwr/pingfrom%20mobile.jpg http://dl.dropbox.com/u/4160051/slckwr/tailsyslog.jpg

    Read the article

  • Problem with PPTP VPN and internet

    - by Enriquev
    Hello, I have an internet connection the following way : Internet Modem <- FireWall(not a router, a firewall) <- PC Everything is setup so my pc has an external ip address, and my firewall takes care of blocking bad stuff. I connect by VPN to an external network, so I added a new connection using Windows Xp's "New connection wizard" (the vpn client that comes with Windows XP), it's a PPTP connection so I used all default settings. I put the PPTP server's IP, my username and password and I succesfully connected. I was able to have access to the external VPN ressources. The only problem is everytime I connect to this VPN, my computer cannot connect to the web anymore, no msn, no ping, no web. Is there anything special I should be doing?

    Read the article

  • Windows Server 2008 r2 FTP blocking outside connections

    - by nbon
    I have a windows server 2008r2 running IIS 7.5. I am trying to setup a FTP-server in IIS but I'm running into some annoying problems. Setting up the server works fine but when I try to connect from a remote client the connection times out. I have tried to connect to the FTP-server from the localhost and it works flawlessly. I figured that it should be some trouble with the firewall so I went into firewall settings and disabled the Public Profile and my remote connections worked! In my inbound rules there are rules for FTP-connections to allow all profiles etc. I guess they are made automatically when setting up the FTP-server. Anyone got any idea how to allow remote connections without turning off the public firewall?

    Read the article

  • Cisco Router 1921

    - by mytempfw
    I'm very new in networking and I'm trying to setup my network as follow [ISP Modem/Router/Switch] + --- + {fxp0} [Linux Firewall] {fxp1} + --- + {??} [Cisco Router 1921] {GE 0/0} + --- + [Cisco Switch] + ... Servers {GE 0/1} + --- + [Cisco Switch] + ... Servers My questions are, Since I'm using both GE 0/0 and GE 0/1 ports to connect to switch, how can I connect my Linux Firewall (Port fxp1) to my Cisco Router? I know the USB and Console port are for configuration, can I use AUX port to connect my firewall (if so is it consider a right way)? Is my setup is right? if not can someone please explain to me to do the setup in right way. Link to the picture of my router: Cisco Router 1921 Thanks

    Read the article

  • How can I use a Windows 2003 server as a HTTP proxy?

    - by Will
    I'd like to set up an HTTP proxy on a windows 2003 server so that I can access blocked websites such as YouTube from behind a corporate firewall (DAMN THE MAN!). I've never done this before, so I'm not even sure if the picture I have in my head is valid or possible. So I'm stuck behind a firewall that blocks sites that I need to access occasionally but that are blocked because of abuse by slackers. I've got a Windows 2003 server hosted out on the internet (i.e., outside of this odious firewall). I know I can configure my browser to use a proxy for my HTTP traffic, so why not use my server? What I'd like to know is: Is my concept valid? Can this be done, and will it work? How do I configure my server to act as a proxy? What applications may I have to install? Free is fine but don't leave out commercial software TIA

    Read the article

  • Accessing localhost:8080 through local network

    - by Theron Luhn
    I'm developing a Python WSGI website. I'm running a Paste development server on my Mac (OS X 10.7) on port 8080. I want to test the website on some other devices and OSs I have connected to the local network (Windows 7 VM, iPad, iPhone, etc.), but am having trouble. I turned on Web Sharing, and am able to access that (port 80) without a problem on all my devices. Port 8080 still doesn't work. An excerpt from my Paste configuration: [server:main] use = egg:waitress#main host = 127.0.0.1 port = 8080 The OS X firewall (Settings - Security - Firewall) is off. I have no other firewall software installed. My network is through a Linksys WRT160N router. I haven't done much with the settings, so most of them are at their defaults. I've been Googling all morning, but can't find a solution.

    Read the article

  • Firestarted Blocking DHCP?

    - by Chiggins
    Alright so on my Ubuntu laptop I get a wireless internet signal, and then distribute it to a switch where my other computers are connected. I also have Firestarter installed on the laptop. I have a problem where the only way that one of my client computers try to get an IP and such from my laptop, it can't because Firestarter is blocking it somehow. I have to stop the firewall in Firestarter, then connect from a client. It connects right away, then I turn Firestarter back on. In the preferences there is an option in "Firewall" called "Start/restart firewall on DHCP lease", but if I have that checked or not doesn't make a difference. So, what can I do to fix this? Its kinda annoying to have to do this whenever I have to connect to the internet. Thanks!

    Read the article

  • VPN pre-shared key problems

    - by Owl
    I have two vpns set up on a Symantec Gateway Security 320. VPN 1 goes to a Symantec Firewall/VPN 100 to another clinic of ours and every hour they lose connectivity and the error log on the Firewall/VPN100 shows an invalid pre-shared key error, although, both devices show the same pre-shared key entered. VPN 2 goes to our software vendor to use an additional part of our program. I am unable to ping the remote address and so is the other company, but my VPN status shows it is connected. They have told me the pre-shared key seemed to be automatically trying to resubmit itself as if it were incorrect, about every hour even though it is correct. They also told me port80 traffic was closed but I show the HTTP service using 80 redirected to 80 in my firewall settings. Please help.

    Read the article

  • howt setup remote access into computer behind 2 routers?

    - by Steve Wasiura
    I can setup remote access to a pc behind a single router/firewall by using NAT and Port Forwarding, simples! But there is a customer that shares an internet connection with another office, and they are behind a second router firewall. I drawed a picture with my crayons but I can't attach it because I'm a new account on SF. see it here: http://i.imgur.com/b3FDx.png So how would I setup remote access to the pc that is beind the second firewall? It must be something about static routes, i.e. if I hit the wan ip on port 4905 I want it to forward it to 10.0.0.30 by going through 192.168.1.10 so a route statement like for all requests to 10.0.0.30, use 192.168.1.10 ? and ass u me router 2 has a static gateway ip of 192.168.1.10 and need a standard NAT on router 2 to point port 4905 to 10.0.0.30 is this the right way, any tips? both routers are netgear consumer equipment. thanks

    Read the article

  • have 2 exchange servers to communicate together!

    - by Data-Base
    we have our exchange server 2007 (10.10.2.11) at work with domain "dddddd.com" and ironport and it work just fine! we need to test some thing at work with Exchange 2010 !! so we came up with this idea: we created a locked network and install firewall (10.10.2.88) the locked network has it's own DC and Exchange servers! we used the domain "dddddd.loc" any way it will be deleted! IPs DC 10.0.0.1 EX 10.0.0.11 now the Exchange server up and running in the firewall (10.10.2.88) we opened the ports and forwarded it to the Exchange2010 (10.0.0.11) in our main DC we defined the zone dddddd.loc to the firewall and the MX records as well but when we test we get error now how to make it so that the 2010 will send email directly to the 2007 (we will not use it to more that that)? and the 2007 will send the email to 2010 if the email has the domain dddddd.loc ?

    Read the article

  • Event 4625 - Logon Failure - Server 2008 R2 is logging them all over the place ! How to stop the attack?

    - by user72593
    I've been monitoring failed logons to a server which is directly connected to the internet with no hardware firewall in the way...testing purposes only. Using the Server 2008 R2 firewall, I blocked access to just about everything except RDP, then I told the firewall to only allow connections to the RDP port from "MY" static IP. I tested from other locations and I am not able to login to the server unless i'm at my office. So how are people coming from Chinese IP's able to attempt logons and get logged as failures ?? Is there something i'm missing that needs to be blocked? Any help would be appreciated.

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >